Commit graph

254,703 commits

Author SHA1 Message Date
Michael Hennerich
7dd04eb04e IIO: GYRO: ADXRS450: Fix sign issues, properly shift results and limit values
RATE and QUADRATURE_CORRECTION data is formatted as a twos complement number,
and therefore must be handled as type signed short.

TEMP result should be properly shifted.

Dynamic Null Correction is a 10-bit signed number.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:40:02 -07:00
Michael Hennerich
8ffc4e7213 IIO: GYRO: ADXRS450: enforce sequential transfer delay of at least 0.1ms
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:40:02 -07:00
Michael Hennerich
232b1648e5 IIO: GYRO: ADXRS450: Add missing parity bit generation
Add missing parity bit generation. Failure to add the parity bit
caused half of the register accesses to fail.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:40:02 -07:00
Michael Hennerich
caca8c89c2 IIO: GYRO: ADXRS450: Cleanup result extraction and update license notice
Cleanup result extraction and update license notice, no functional changes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:40:01 -07:00
Michael Hennerich
31f6a29a58 IIO: GYRO: ADXRS450: Don't issue two messages, use two transfers
Don't issue the same message twice, use two transfers and group them together

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:40:01 -07:00
Michael Hennerich
bd5a793fec IIO: DDS: AD9834: Add support for AD9837 and AD9838 DDS devices
Add support for AD9837 and AD9838 DDS devices
Update copyright and license notice
Fix typo

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:40:01 -07:00
Michael Hennerich
ba1c2bb2cc IIO: DAC: AD5791: Add support for the AD5760/AD5780 High Resolution DACs
Add support for the AD5760/AD5780 High Resolution Voltage Output DACs

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 11:40:01 -07:00
Stephen Warren
af46800b9a ASoC: Implement mux control sharing
Control sharing is enabled when two widgets include pointers to the
same kcontrol_new in their definition. Specifically:

static const struct snd_kcontrol_new adcinput_mux =
	SOC_DAPM_ENUM("ADC Input", adcinput_enum);

static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
  SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
  SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
};

This is useful when a single register bit or field affects multiple
muxes at once. The common case is to have separate control bits or
fields for each mux (channel). An alternative way of looking at this
is that the mux is a stereo (or even n-channel) mux, rather than
independant mono muxes.

Without this change, a separate kcontrol will be created for each
DAPM_MUX. This has the following disadvantages:

* Confuses the user/programmer with redundant controls that don't
  map to separate hardware.

* When one of the controls is changed, ASoC fails to update the DAPM
  logic for paths solely affected by the other controls impacted by
  the same register bits. This causes some paths not to be correctly
  powered up or down. Prior to this change, to work around this, the
  user or programmer had to manually toggle all duplicate controls away
  from the intended setting, and then back to it.

Control sharing implies that the control is named based on the
kcontrol_new itself, not any of the widgets that are affected by it.

Control sharing is implemented by: When creating kcontrols, if a
kcontrol does not yet exist for a particular kcontrol_new, then a new
kcontrol is created with a list of widgets containing just a single
entry. This is the normal case. However, if a kcontrol does already
exists for the given kcontrol_new, the current widget is simply added
to that kcontrol's list of affected widgets.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 19:29:15 +01:00
Stephen Warren
fafd2176f7 ASoC: Store a list of widgets in a DAPM mux/mixer kcontrol
A future change will allow multiple widgets to be affected by the same
control. For example, a single register bit that controls separate muxes
in both the L and R audio paths.

This change updates the code that handles relevant controls to be able
to iterate over a list of affected widgets. Note that only the put
functions need significant modification to implement the iteration; the
get functions do not need to iterate, nor unify the results, since all
affected widgets reference the same kcontrol.

When creating the list of widgets, always create a 1-sized list, since
the control sharing is not implemented in this change.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 19:29:05 +01:00
Stephen Warren
fad598887d ASoC: Add w->kcontrols, and populate it
Future changes will need reference to the kcontrol created for a given
kcontrol_new. Store the created kcontrol values now.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 19:28:57 +01:00
Stephen Warren
82cfecdc03 ASoC: s/w->kcontrols/w->kcontrol_news/g
A future change will modify struct snd_soc_dapm_widget to store the
actual kcontrol pointers for each kcontrol_new in a field named
kcontrols. Rename the existing kcontrols field to enable this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 19:28:47 +01:00
Andiry Xu
4f0871a6c7 xHCI: Clear PLC in xhci_bus_resume()
This patch clears PORT_PLC if xhci_bus_resume() resumes a previous suspended
port, because if a port transition from U3 to U0 state, it will report a
port link state change, and software should clear the corresponding PLC bit.

It also uses hcd->speed to check if a port is a USB2 protocol port.

The patch fixes the issue that USB keyboard can not wakeup system from
hibernation.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-05-03 11:14:32 -07:00
Mark Brown
65f7e32520 Merge branch 'for-2.6.39' into for-2.6.40 2011-05-03 19:07:45 +01:00
Jeff Chua
62819fd948 staging: r8712u: Fix driver to support ad-hoc mode
Driver r8712u is unable to handle ad-hoc mode. The issue is that when
the driver first starts, there will not be an SSID for association.
The fix is to always call the "select and join from scan" routine when
in ad-hoc mode.

Note: Ad-hoc mode worked intermittently before. If the driver had
previously been associated, then things were OK.

Signed-off-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:57:39 -07:00
Lars-Peter Clausen
005967a1df ASoC: JZ4740: Fix i2s shutdown
The i2s shutdown callback has the check whether it should be disabled reversed.
Currently it is disabled if another stream is still active, but kept enabled if
the last stream is closed. This patch fixes it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 18:48:24 +01:00
Lars-Peter Clausen
6c45e12656 ASoC: Remove DAPM debugfs entries before freeing widgets
Remove the DAPM debugfs entries before freeing the context's widgets, otherwise a
use after free situation might occur.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 18:43:52 +01:00
Lars-Peter Clausen
d5d1e0bef4 ASoC: Move DAPM widget debugfs entry creation to snd_soc_dapm_new_widgets
Currently debugfs entries for a DAPM widgets are only added in
snd_soc_dapm_debugfs_init. If a widget is added later (for example in the
dai_link's probe callback) it will not show up in debugfs.
This patch moves the creation of the widget debugfs entry to
snd_soc_dapm_new_widgets where it will be added after the widget has been
properly instantiated.

As a side-effect this will also reduce the number of times the DAPM widget list
is iterated during a card's instantiation.

Since it is possible that snd_soc_dapm_new_widgets is invoked form the codecs or
cards probe callbacks, the creation of the debugfs dapm directory has to be
moved before these are called.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 18:43:44 +01:00
Lars-Peter Clausen
8eecaf6244 ASoC: Move DAPM debugfs directory creation to snd_soc_dapm_debugfs_init
Move the creation of the DAPM debugfs directory to snd_soc_dapm_debugfs_init
instead of having the same duplicated code in both codec and card DAPM setup.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 18:43:32 +01:00
Lars-Peter Clausen
0aaae527c7 ASoC: Free the card's DAPM context
Free the card's DAPM context when the card is removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 18:43:15 +01:00
Mike Rapoport
1307394afd ASoC: tegra: TrimSlice machine support
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-03 18:42:44 +01:00
John Linn
61ec901698 tty/serial: add support for Xilinx PS UART
The Xilinx PS Uart is used on the new ARM based SoC. This
UART is not compatible with others such that a seperate
driver is required.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:26:39 -07:00
Pavankumar Kondeti
2ce2c3ac88 USB: OTG: msm: Clear in_lpm flag before enabling the IRQ in resume
The current code is clearing in_lpm flag after enabling the IRQ.
If IRQ comes immediately before in_lpm flag is set, it thinks that
hardware is in low power mode and disables the IRQ.  Fix this by
clearing in_lpm flag before enabling the IRQ.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:25:26 -07:00
Anji jonnala
ac1aa6a217 USB: gadget: Initialize ep0 once while registering gadget in ci13xxx_udc
Some of the simulators may cache the ep0 maxpacket size to zero
if the ep0 dQh is not setup before enabling the pullup. Hence
Setup ep0 and initialize the dQh fields once while registering the
gadget(before enabling the pullup).

HSUSB Chipidea link controller spec says ep0 is enabled always
in the HW. Hence disabling and enabling the ep0 as a part of
reset interrupt is unneccesary.
Remove the disable/enable ep0 logic from reset interrupt handling.

Signed-off-by: Anji jonnala <anjir@codeaurora.org>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:25:25 -07:00
Pavankumar Kondeti
76cd9cfb2e USB: gadget: Use ep0out for control OUT data phase in ci13xxx_udc
The current code queue the control OUT data request to ep0in instead of
ep0out.  Check ep0_dir and use the correct control endpoint.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:25:25 -07:00
Pavankumar Kondeti
4c5212b768 USB: gadget: Fix bug in endpoint feature request processing in ci13xxx_udc
The OUT endpoints are stored in 0 - hw_ep_max/2 and IN endpoints are
stored from hw_ep_max/2 - hw_ep_max in ci13xxx_ep array.  Retrieve
the IN endpoint correctly while processing endpoint feature requests.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:25:25 -07:00
Pavankumar Kondeti
986b11b8c7 USB: gadget: Fix unused variable warning in ci13xxx_udc
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:25:24 -07:00
Pavankumar Kondeti
8c2387a71c USB: gadget: Use bitwise AND operator to test flags in ci13xxx_udc
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:25:24 -07:00
Pavankumar Kondeti
ef90748216 USB: gadget: Fix typo (s/EBUSY/-EBUSY) in ci13xxx_udc
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:25:24 -07:00
Dmitry Eremin-Solenikov
2887ba9e3e USB: gpio-vbus: ask for vbus_draw regulator before registering xceiv
Ask for vbus_draw regulator before registering tranceiver to disallow possible
race between registration and set_power/etc.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:17:14 -07:00
Michael Hund
ce97cac813 USB: ldusb: add several new devices
Added several new devices to ldusb and excluded them from the HID driver.

Signed-off-by: Michael Hund <mhund@ld-didactic.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:12:00 -07:00
Rabin Vincent
139540170d USB: ehci: remove structure packing from ehci_def
As pointed out by Arnd Bergmann, in include/linux/usb/ehci_def.h, struct
ehci_caps is defined with __attribute__((packed)) for no good reason,
and this triggers undefined behaviour when using ARM's readl() on
pointers to elements of this structure:

http://lkml.kernel.org/r/201102021700.20683.arnd@arndb.de

The same problem exists with the other two structures in ehci_def.h too,
so remove the __attribute__((packed)) from all of them.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:09:32 -07:00
David Daney
14be249c96 usb: Configure octeon2 glue logic for proper uSOF cycle period.
The reset value of the uSOF cycle period is incorrect.  Set it to
60,000 bits.  Without this, several commercial USB flash memory
devices and hubs fail to work properly.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:09:32 -07:00
David Daney
bf54171521 usb: octeon2-common.c: Configure ports for proper electrical characteristics.
Additional PHY tuning is needed to obtain compliant 'eye' diagram
electrical characteristics.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:09:31 -07:00
David Daney
f5ced99725 USB: octeon2-common: Don't reinitialize the clocks.
The UCTL clock initialization will cause the ehci and ohci blocks to
become inoperable if the clocks are reinitialized.

Check to see if the clocks have already been initialized.

Also use a mutex to protect the clock initialization code so that
there can be no attempt to use the clocks before they are fully
configured.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-03 10:09:31 -07:00
Takashi Iwai
f2e0192519 ALSA: lola - Yet another linux/delay.h inclusion
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 18:48:29 +02:00
Sage Weil
4ad12621e4 libceph: fix ceph_osdc_alloc_request error checks
ceph_osdc_alloc_request returns NULL on failure.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-03 09:28:13 -07:00
Henry C Chang
8c71897be2 ceph: handle ceph_osdc_new_request failure in ceph_writepages_start
We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-03 09:28:12 -07:00
Henry C Chang
ca20892db7 libceph: fix ceph_msg_new error path
If memory allocation failed, calling ceph_msg_put() will cause GPF
since some of ceph_msg variables are not initialized first.

Fix Bug #970.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-03 09:28:11 -07:00
Sage Weil
3772d26d87 ceph: use ihold() when i_lock is held
See 0444d76ae6.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-03 09:28:08 -07:00
Linus Torvalds
609cfda586 Merge branch 'stable/bug-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: mask_rw_pte mark RO all pagetable pages up to pgt_buf_top
  xen/mmu: Add workaround "x86-64, mm: Put early page table high"
2011-05-03 09:25:42 -07:00
Yongqiang Yang
667eff35a1 ext4: reimplement convert and split_unwritten
Reimplement ext4_ext_convert_to_initialized() and
ext4_split_unwritten_extents() using ext4_split_extent()

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Allison Henderson <achender@linux.vnet.ibm.com>
2011-05-03 12:25:07 -04:00
Linus Torvalds
9a6cd4b45a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdhci: Check mrq != NULL in sdhci_tasklet_finish
  mmc: sdhci: Check mrq->cmd in sdhci_tasklet_finish
  mmc: tmio: fix .set_ios(MMC_POWER_UP) handling
  mmc: fix a race between card-detect rescan and clock-gate work instances
  mmc: omap: Fix possible NULL pointer deref
  mmc: core: mmc_add_card(): fix missing break in switch statement
  mmc: sdhci-pci: Fix error case in sdhci_pci_probe_slot()
2011-05-03 09:24:44 -07:00
Linus Torvalds
bab0dcc717 Merge branches 'x86-fixes-for-linus' and 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, reboot: Fix relocations in reboot_32.S
  x86, NUMA: Fix empty memblk detection in numa_cleanup_meminfo()
  x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix typo CONFIG_GENIRC_IRQ_SHOW_LEVEL
2011-05-03 09:23:44 -07:00
Yongqiang Yang
47ea3bb59c ext4: add ext4_split_extent_at() and ext4_split_extent()
Add two functions: ext4_split_extent_at(), which splits an extent into
two extents at given logical block, and ext4_split_extent() which
splits an extent into three extents.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Allison Henderson <achender@linux.vnet.ibm.com>
2011-05-03 12:23:07 -04:00
Takashi Iwai
f044785d0a ALSA: lola - Add missing inclusion of linux/delay.h
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 18:21:01 +02:00
Axel Lin
4296f1ad5a Input: h3600_ts_input - fix a leak of the IRQ during init failure
Make sure we are passing the same cookie in all calls to request_irq() and
free_irq().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03 09:02:13 -07:00
Dmitry Torokhov
12d0cef701 Input: sh_keysc - make sh_keysc_device_driver static
This variable is not used outside of the module so we should mark it
as static.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03 09:02:01 -07:00
Yongqiang Yang
197217a5af ext4: add a function merging extents right and left
1) Rename ext4_ext_try_to_merge() to ext4_ext_try_to_merge_right().

2) Add a new function ext4_ext_try_to_merge() which tries to merge
   an extent both left and right.

3) Use the new function in ext4_ext_convert_unwritten_endio() and
   ext4_ext_insert_extent().

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Tested-by: Allison Henderson <achender@linux.vnet.ibm.com>
2011-05-03 11:45:29 -04:00
Jan Kara
df5e622340 ext4: fix deadlock in ext4_symlink() in ENOSPC conditions
ext4_symlink() cannot call __page_symlink() with transaction open.
__page_symlink() calls ext4_write_begin() which can wait for
transaction commit if we are running out of space thus causing a
deadlock. Also error recovery in ext4_truncate_failed_write() does not
count with the transaction being already started (although I'm not
aware of any particular deadlock here).

Fix the problem by stopping a transaction before calling
__page_symlink() (we have to be careful and put inode to orphan list
so that it gets deleted in case of crash) and starting another one
after __page_symlink() returns for addition of symlink into a
directory.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-03 11:12:58 -04:00
Takashi Iwai
fe4af1b55e ALSA: lola - Implement polling_mode like hd-audio
Also protect the call of lola_update_rirb() with spinlock.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 17:06:53 +02:00