Commit graph

254,703 commits

Author SHA1 Message Date
Bryan Schumaker
1db2b9dde3 NFSD: Check status from nfsd4_map_bcts_dir()
Compiling gave me this warning:
fs/nfsd/nfs4state.c: In function ‘nfsd4_bind_conn_to_session’:
fs/nfsd/nfs4state.c:1623:9: warning: variable ‘status’ set but not used
[-Wunused-but-set-variable]

The local variable "status" was being set by nfsd4_map_bcts_dir() and
then ignored before calling nfsd4_new_conn().

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:58 -04:00
Bryan Schumaker
fccb13c947 NFSD: Remove setting unused variable in nfsd_vfs_read()
Compiling gave me this warning:
fs/nfsd/vfs.c: In function ‘nfsd_vfs_read’:
fs/nfsd/vfs.c:880:16: warning: variable ‘inode’ set but not used
[-Wunused-but-set-variable]

I discovered that a local variable "inode" was being set towards the
beginning of nfsd_vfs_read() and then ignored for the rest of the
function.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:57 -04:00
Mi Jinlong
bcecf1ccc3 nfsd41: error out on repeated RECLAIM_COMPLETE
Servers are supposed to return nfserr_complete_already to clients that
attempt to send multiple RECLAIM_COMPLETEs.

Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:56 -04:00
Mi Jinlong
868b89c3dc nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence
Make sure nfs server errors out if request contains more ops
than channel allows.

Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
[bfields@redhat.com: use helper function]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:55 -04:00
Andy Adamson
b7c66360dc nfsd v4.1 lOCKT clientid field must be ignored
RFC 5661 Section 18.11.3

   The clientid field of the owner MAY be set to any value by the client
   and MUST be ignored by the server.  The reason the server MUST ignore
   the clientid field is that the server MUST derive the client ID from
   the session ID from the SEQUENCE operation of the COMPOUND request.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:54 -04:00
Mi Jinlong
a62573dc35 nfsd41: add flag checking for create_session
Teach the NFS server to reject invalid create_session flags.

Also do some minor formatting adjustments.

Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:53 -04:00
Mi Jinlong
ac6721a13e nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly
The NFS server uses nfsd_create_v3 to handle EXCLUSIVE4_1 opens, but
that function is not prepared to handle them.

Rename nfsd_create_v3() to do_nfsd_create(), and add handling of
EXCLUSIVE4_1.

Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:52 -04:00
J. Bruce Fields
68d9318435 nfsd4: fix wrongsec handling for PUTFH + op cases
When PUTFH is followed by an operation that uses the filehandle, and
when the current client is using a security flavor that is inconsistent
with the given filehandle, we have a choice: we can return WRONGSEC
either when the current filehandle is set using the PUTFH, or when the
filehandle is first used by the following operation.

Follow the recommendations of RFC 5661 in making this choice.

(Our current behavior prevented the client from doing security
negotiation by returning WRONGSEC on PUTFH+SECINFO_NO_NAME.)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-29 20:47:51 -04:00
Ben Hutchings
7fc2a61638 xhci-hcd: Include <linux/slab.h> in xhci-pci.c
Commit b02d0ed677 ('xhci: Change
hcd_priv into a pointer') added calls to kzalloc() and kfree() in
xhci-pci.c.  On most architectures <linux/slab.h> is indirectly
included, but on some it is not.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>,
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:33:12 -07:00
Michal Nazarewicz
643de6240b usb: core: Change usb_create_sysfs_intf_files()' return type to void
The usb_create_sysfs_intf_files() function always returned zero even
if it failed to create sysfs fails.  Since this is a desired behaviour
there is no need to return return code at all.  This commit changes
function's return type (form int) to void.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:38 -07:00
Alan Stern
869410f82c USB: add queued-unlinks test case to usbtest driver
This patch (as1452b) adds a new test case to the usbtest driver.  Test
24 exercises the unlink-from-queue pathways in the host.  It queues a
user-specified number of bulk-OUT URBs of user-specified size, unlinks
the fourth- and second-from-last URBs in the queue, and then waits to
see if all the URBs complete in the expected way (except of course
that the unlinked URBs might complete normally, if they weren't
unlinked soon enough).

This new test has confirmed the existence of a bug in the ehci-hcd
driver, to be fixed by a separate patch.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:38 -07:00
Jim Lin
1f594b64a4 USB: ehci: tegra: fix USB1 port reset issue
Tegra USB1 port needs to issue Port Reset twice internally, otherwise it
fails to enumerate devices attached to it

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Olof Johansson <olofj@chromium.org>
[ squash two patches into one and minor style cleanups ]
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:37 -07:00
Jingoo Han
3c86c07baa USB: ohci-s3c2410: use resource_size()
This patch uses the resource_size help function instead of
manually calculating the resource size. It can reduce the chance
of introducing off-by-one errors.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:37 -07:00
Jingoo Han
e7f84331c2 USB: ohci-s3c2410: use __devinit and __devexit macros for probe and remove
The __devinit and __devexit macros were added to probe and remove
functions. The macros move the probe and remove functions to the
devinit and devexit sections.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:36 -07:00
Michal Nazarewicz
fd4477b09e usb: gadget: storage_common: use kstrto*() [bug fix]
This commit fixes an embarrassing bug in the "storage_common:
use kstrto*()" patch which caused fsg_store_ro() to return
zero instead of the length of the consumed buffer.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:36 -07:00
Sebastian Andrzej Siewior
865835fa44 usb/dummy_hcd: don't probe for udc if hcd failed
the_controller is allocated in dummy_hcd_probe() and is NULL if the
allocation failed. The probe function of the udc driver is dereferencing
this pointer and fault.
Alan Stern suggested to abort the dummy_hcd driver probing so the module
is not loaded. The is abort-on-error has been also added to the udc
driver.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:36 -07:00
Sebastian Andrzej Siewior
1d15ee4cd7 usb/hcd: don't return 0 on error in usb_add_hcd()
If USB type detections fails, we run into default and return 0.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:35 -07:00
Kuninori Morimoto
b002ff6e26 usb: renesas_usbhs: add autonomy mode
Current renesas_usbhs was designed to save power when USB is not connected.
And it assumed platform uses callback to notify connection/disconnection
by external interrupt.

But some SuperH / platform board doesn't have such feature.

This patch adds autonomy mode which detect USB connection/disconnection
by internal interrupt.
But power will be always ON when autonomy mode is selected.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:35 -07:00
Kuninori Morimoto
bc57381e63 usb: renesas_usbhs: use delayed_work instead of work_struct
This delay is used to overjump debounce.

And, this patch also move usbhsc_drvcllbck_notify_hotplug to global,
because it will be called from other files.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:34 -07:00
Kuninori Morimoto
5ea68d541d usb: renesas_usbhs: prevent NULL pointer crash
usbhs_status_get_each_irq/usbhs_irq_callback_update might be called
with mod == NULL

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:34 -07:00
Kuninori Morimoto
6e267da8f1 usb: renesas_usbhs: add power control function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:34 -07:00
Kuninori Morimoto
206dcc2cfe usb: renesas_usbhs: move pdev_to_priv to global
usbhs_pdev_to_priv function will be used in other files.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:33 -07:00
Kuninori Morimoto
f429ea3f34 usb: renesas_usbhs: add error reason for usbhs_pipe_malloc
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:33 -07:00
Kuninori Morimoto
af32fe5113 usb: renesas_usbhs: remove callback when module removed.
The callback function which is called from platform must be removed
if module removed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:32 -07:00
Kuninori Morimoto
9a28b7bd4f usb: renesas_usbhs: return error if wrong recip request
There are some USB Host which doesn't notice disconnection at once.
And it might try some request after reconnection with old settings.
Current renesas_usbhs will crash in such case.
This patch prevent this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:32 -07:00
Kuninori Morimoto
cb96632c18 usb: renesas_usbhs: modify spinlock method
Current renesas_usbhs driver was using spin_trylock to avoid
dead lock / nest lock.
But acording to CONFIG_DEBUG_SPINLOCK, it is BUG under UP environment.
This patch add usbhsg_trylock to avoid this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:32 -07:00
Kuninori Morimoto
409ba9e7c0 usb: renesas_usbhs: don't re-allocation pipe buffer
Because pipe buffer allocation is very picky and difficult,
current renesas_usbhs driver is not caring pipe re-allocation.

In this situation, driver will create new pipe without caring old pipe
if "usbhsg_ep_enable" is called after "usbhsg_ep_disable" on current driver.
This mean the limited pipe and buffer will be used as waste.
But it is possible to re-use same buffer to same pipe.

By this patch, driver will initialize pipe when it detected new connection or
new gadget, and doesn't try re-allocation for same pipe in above case.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:31 -07:00
Kuninori Morimoto
45e13e6e0a usb: renesas_usbhs: modify fifo clear timing
Pipe buffer should be cleaned before using it,
but should NOT be cleaned in pipe "prepare" function.
Because the pipe might be working in such timing.
This patch fixup this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:31 -07:00
Jonas Andersson
a0c25c2050 USB: g_printer required set interface request
g_printer reqiured "set interface" request from host. Not all hosts send
this request.  This patch enable the interface when it get "set
configuration" request from host.

Signed-off-by: Jonas Andersson <jonas@microbit.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:31 -07:00
Sven Schnelle
a8779ee94e USB: dbpg gadget: dont mask out direction bit
Stripping the direction bit off will produce an
invalid descriptor.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:30 -07:00
Sven Schnelle
83b7201993 USB: dbgp gadget: set MaxpacketSize0
The current code doesn't set it, so linux complains about
it when connected, and ignores the device:

[104611.068082] usb 1-5: new high speed USB device using ehci_hcd and address 127
[104611.088368] usb 1-5: Invalid ep0 maxpacket: 0

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:30 -07:00
Sven Schnelle
1744020ceb USB: dbgp gadget: fix return value of dbgp_setup
Current code returns 0 even if it can't handle the request.
This leads to timeouts when an unhandled request is sent:

Bus 001 Device 003: ID 0525:c0de Netchip Technology, Inc.
Device Descriptor:
[..]
can't get device qualifier: Connection timed out
[..]

change the code to return EOPNOTSUPP in such cases.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:30 -07:00
Kuninori Morimoto
25a73c6ce7 usb: renesas_usbhs: Driver is depend on SuperH
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:29 -07:00
Kuninori Morimoto
c89d2613b8 usb: renesas_usbhs: fixup cast warning
This patch fixup cast warning on 64 bit compiler

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:29 -07:00
Alan Stern
6498d9db6d USB: documentation update for the pre_reset method
This patch (as1459) updates the documentation for the pre_reset method
in struct usb_driver.  When a driver is notified of an impending
reset, it must cancel all outstanding I/O and not start any new I/O
until it has been notified that the reset is complete.

As far as I know, most existing drivers that implement pre_reset do
this now.  The major exceptions appear to be the SpeedTouch and
CDC-WDM drivers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:24:29 -07:00
Marius B. Kotsbak
15b2f3204a Bind only modem AT command endpoint to option module.
Network interface is handled by upcoming gt_b3730 module.

Removed "GT-B3710" from comment, it is another modem with another USB ID.

Signed-off-by: Marius B. Kotsbak <marius@kotsbak.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:05:06 -07:00
Oliver Neukum
d771d8aa37 USB: cdc-wdm: reset handling according to new requirements
This patch
- ensures no IO takes place during resets
- reports resets to user space

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:04:40 -07:00
Hermann Kneissel
b4026c4584 USB: gamin_gps: Fix for data transfer problems in native mode
This patch fixes a problem where data received from the gps is sometimes
transferred incompletely to the serial port. If used in native mode now
all data received via the bulk queue will be forwarded to the serial
port.

Signed-off-by: Hermann Kneissel <herkne@gmx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 17:03:59 -07:00
Michal Nazarewicz
7701846fd5 USB: gadget: g_multi: fixed vendor and product ID in inf files
Commit 1c6529e92b "USB: gadget: g_multi: fixed vendor and
product ID" replaced g_multi's vendor and product ID with
proper ID's from Linux Foundation.  This commit now updates
INF files in the Documentation/usb directory which were
omitted in the original commit.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 16:45:22 -07:00
Benedek László
37909fe588 USB: serial: ftdi_sio: adding support for TavIR STK500
Adding support for the TavIR STK500 (id 0403:FA33)
Atmel AVR programmer device based on FTDI FT232RL.

Signed-off-by: Benedek László <benedekl@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 16:45:22 -07:00
Elizabeth Jennifer Myers
3938a0b32d USB: moto_modem: Add USB identifier for the Motorola VE240.
Tested on my phone, the ttyUSB device is created and is fully
functional.

Signed-off-by: Elizabeth Jennifer Myers <elizabeth@sporksirc.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 16:45:21 -07:00
Craig Shelley
4eff0b40a7 USB: CP210x Add 4 Device IDs for AC-Services Devices
This patch adds 4 device IDs for CP2102 based devices manufactured by
AC-Services. See http://www.ac-services.eu for further info.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-29 16:45:20 -07:00
Linus Torvalds
1be6a1f89f Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] pmcraid: reject negative request size
  [SCSI] put stricter guards on queue dead checks
  [SCSI] scsi_dh: fix reference counting in scsi_dh_activate error path
  [SCSI] mpt2sas: prevent heap overflows and unchecked reads
2011-04-29 16:27:52 -07:00
Rafael J. Wysocki
85eb8c8d0b PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)
Many different platforms and subsystems may want to disable device
clocks during suspend and enable them during resume which is going to
be done in a very similar way in all those cases.  For this reason,
provide generic routines for the manipulation of device clocks during
suspend and resume.

Convert the ARM shmobile platform to using the new routines.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-04-30 00:25:44 +02:00
David Ahern
c63ca0c01d perf stat: Tell user about unsupported events in the list
Similar to perf-record, tell user about unsupported events
that will not be counted if invoked in verbose mode.

e.g.,

 $ perf stat -e dTLB-prefetch-misses -v -- sleep 1
 dTLB-prefetch-misses event is not supported by the kernel.
 dTLB-prefetch-misses: 0 0 0

 Performance counter stats for 'sleep 1':

     <not counted> dTLB-prefetch-misses

        1.001884783  seconds time elapsed

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1304114655-10600-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-30 00:18:14 +02:00
Linus Torvalds
40a963502c Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86, nmi: Move LVT un-masking into irq handlers
  perf events, x86: Work around the Nehalem AAJ80 erratum
  perf, x86: Fix BTS condition
  ftrace: Build without frame pointers on Microblaze
2011-04-29 15:08:53 -07:00
Linus Torvalds
fcc4dc7151 Merge branch 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Initialize CLOCK_ID to HRTIMER_BASE table statically
  rtc: max8925: Call dev_set_drvdata before rtc_device_register
2011-04-29 15:08:31 -07:00
Linus Torvalds
a6ab948e65 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: ce4100: Configure IOAPIC pins for USB and SATA to level type
  x86: devicetree: Configure IOAPIC pin only once
  x86, setup: When probing memory with e801, use ax/bx as a pair
2011-04-29 15:07:19 -07:00
Linus Torvalds
592311c91d Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (lm85) Fix error paths in probe function
  hwmon: (lm85) Add missing list terminators
  hwmon: (adm1021) Clarify documentation regarding Xeon processors
  hwmon: (lm90) Fix update interval information in driver documentation
  hwmon: (lm90) Add support for ADT7461A and NCT1008
2011-04-29 14:58:34 -07:00
Jan Kara
ae54870a1d ext3: Fix lock inversion in ext3_symlink()
ext3_symlink() cannot call __page_symlink() with transaction open.
__page_symlink() calls ext3_write_begin() which gets page lock which ranks
above transaction start (thus lock ordering is violated) and and also
ext3_write_begin() waits for a transaction commit when we run out of space
which never happens if we hold transaction open.

Fix the problem by stopping a transaction before calling __page_symlink()
(we have to be careful and put inode to orphan list so that it gets deleted
in case of crash) and starting another one after __page_symlink() returns
for addition of symlink into a directory.

Signed-off-by: Jan Kara <jack@suse.cz>
2011-04-29 23:20:03 +02:00