Make dst_alloc() and it's users explicitly initialize the entire
entry.
The zero'ing done by kmem_cache_zalloc() was almost entirely
redundant.
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a couple of places in this code where these values can wrap or
go negative, and that could potentially end up overflowing the buffer.
Ensure that that doesn't happen. Do all of the length calculation and
checks first, and only perform the memcpy after they pass.
Also, increase some stack variables to 32 bits to ensure that they don't
wrap without being detected.
Finally, change the error codes to be a bit more descriptive of any
problems detected. -EINVAL isn't very accurate.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's possible that when we go to decode the string area in the
SESSION_SETUP response, that bytes_remaining will be 0. Decrementing it at
that point will mean that it can go "negative" and wrap. Check for a
bytes_remaining value of 0, and don't try to decode the string area if
that's the case.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The buffer length checks in this function depend on this value being a
signed data type, but 690c522fa converted it to an unsigned type.
Also, eliminate a problem with the null termination check in the same
function. cifs_strndup_from_ucs handles that situation correctly
already, and the existing check could potentially lead to a buffer
overrun since it increments bleft without checking to see whether it
falls off the end of the buffer.
Cc: stable@kernel.org
Reported-and-Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
- Remove coding standard violations reported by checkpatch.pl
- Delete comment about handling of conditional branches which is no
longer true.
- Delete comment at end of file which lists all ARM instructions. This
duplicates data available in the ARM ARM and seems like an
unnecessary maintenance burden to keep this up to date and accurate.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Being able to probe NOP instructions is useful for hard-coding probeable
locations and is used by the kprobes test code.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
These bit field manipulation instructions occur several thousand
times in an ARMv7 kernel.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The MOVW and MOVT instructions account for approximately 7% of all
instructions in a ARMv7 kernel as GCC uses them instead of a literal
pool.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The instruction decoding in space_cccc_000x needs to reject probing of
instructions with undefined patterns as they may in future become
defined and then emulated faultily - as has already happened with the
SMC instruction.
This fix is achieved by testing for the instruction patterns we want to
probe and making the the default fall-through paths reject probes. This
also allows us to remove some explicit tests for instructions that we
wish to reject, as that is now the default action.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The tests to explicitly reject probing CPS, RFE and SRS instructions
are redundant as the default case is now to reject undecoded patterns.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The PLD instructions wasn't being decoded correctly and the emulation
code wasn't adjusting PC correctly.
As the PLD instruction is only a performance hint we emulate it as a
simple nop, and we can broaden the instruction decoding to take into
account newer PLI and PLDW instructions.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The emulation of SETEND was broken as it changed the endianess for
the running kprobes handling code. Rather than adding a new simulation
routine to fix this we'll just reject probing of SETEND as these should
be very rare in the kernel.
Note, the function emulate_none is now unused but it is left in the
source code as future patches will use it.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Following the change to remove support for coprocessor instructions
we are left with three stub functions which can be consolidated.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The kernel doesn't currently support VFP or Neon code, and probing of
code with CP15 operations is fraught with bad consequences. Therefore we
don't need the ability to probe coprocessor instructions and the code to
support this can be removed.
The removed code also had at least two bugs:
- MRC into R15 should set CPSR not trash PC
- LDC and STC which use PC as base register needed the address offset by 8
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The USAD8 instruction wasn't being explicitly decoded leading
to the incorrect emulation routine being called. It can be correctly
decoded in the same way as the signed multiply instructions so we move
the decoding there.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The signed multiply instructions were being decoded incorrectly.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
These sign extension instructions are encoded as extend-and-add
instructions where the register to add is specified as r15. The decoding
routines weren't checking for this and were using the incorrect
emulation code, giving incorrect results.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The instructions space for media instructions contains some undefined
patterns. We need to reject probing of these because they may in future
become defined and the kprobes code may then emulate them faultily.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The v6T2 RBIT instruction was accidentally being emulated correctly,
this patch adds correct decoding for the instruction.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
These instructions are specified as UNPREDICTABLE.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The decoding of these instructions got the register indexed and
immediate indexed forms the wrong way around, causing incorrect
emulation.
Instructions like "LDRD Rx, [Rx]" were corrupting Rx because the base
register writeback was being performed unconditionally, overwriting the
value just loaded from memory. The fix is to only writeback the base
register when that form of the instruction is used. Note, now that we
reject probing writeback with PC the emulation code doesn't need the
check rn!=15.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Using PC as an base register with writeback is UNPREDICTABLE, as is non
word-sized loads or stores of PC. (We only really care about preventing
loads to PC but it keeps the code simpler if we also exclude stores.)
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The decoding of these instructions got the register indexed and
immediate indexed forms the wrong way around, causing incorrect
emulation.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The emulation code for STREX and LDREX instructions is faulty, however,
rather than attempting to fix this we reject probes of these
instructions. We do this because they can never succeed in gaining
exclusive access as the exception framework clears the exclusivity
monitor when a probes breakpoint is hit. (This is a general problem
when probing all instructions executing between a LDREX and its
corresponding STREX and can lead to infinite retry loops.)
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The instructions space for 'Multiply and multiply-accumulate'
instructions contains some undefined patterns. We need to reject
probing of these because they may in future become defined and the
kprobes code may then emulate them faultily.
This has already happened with the new MLS instruction which this patch
also adds correct decoding for as well as tightening up other decoding
tests. (Before this patch the wrong emulation routine was being called
for MLS though it still produced correct results.)
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
The MRS instruction should set mode and interrupt bits in the read value
so it is simpler to use a new simulation routine (simulate_mrs) rather
than some modified emulation.
prep_emulate_rd12 is now unused and removed.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
We need to reject probing of instructions which read SPSR because
we can't handle this as the value in SPSR is lost when the exception
handler for the probe breakpoint first runs.
This patch also fixes the bitmask for MRS instructions decoding to
include checking bits 5-7.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Emulation of instructions like "ADD rd, rn, #<const>" would result in a
corrupted value for rd.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Probing these instructions was corrupting R0 because the emulation code
didn't account for the fact that they don't write a result to a
register.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Now we have the framework code handling conditionally executed
instructions we can remove redundant checks in individual simulation
routines.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
When a kprobe is placed onto conditionally executed ARM instructions,
many of the emulation routines used to single step them produce corrupt
register results. Rather than fix all of these cases we modify the
framework which calls them to test the relevant condition flags and, if
the test fails, skip calling the emulation code.
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Currently emulate_ldrd and emulate_strd don't even have the adjustment
of the PC value, so in case of Rn == PC, it will not update the PC
incorrectly but instead load/store from the wrong address. Let's add
both the adjustment of the PC value and the check for PC == PC.
Signed-off-by: Viktor Rosendahl <viktor.rosendahl@nokia.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Some subsystems need to attach PM-related data to struct device and
they need to use devres for this purpose. For their convenience
and to make code more straightforward, add a new field called
subsys_data to struct dev_pm_info and let subsystems use it for
attaching PM-related information to devices.
Convert the ARM shmobile platform to using the new field.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
In commit 7538e3db6e (PM: add support
for device power domains) a better way for handling platform-specific
power hooks was introduced.
Rather than using the platform_bus dev_pm_ops overrides
(platform_bus_set_pm_ops()), this patch moves the OMAP runtime PM
implementation over to using device power domains.
Since OMAP is the only user of platform_bus_set_pm_ops(), that
interface can be removed (and will be in a forthcoming patch.)
[rjw: Rebased on top of a previous change modifying the handling of
power domains by the PM core so that power domain callbacks take
precendence over subsystem-level PM callbacks.]
Signed-off-by: Kevin Hilman <khilman@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Once shmobile platforms have been converted to using power domains
for overriding the platform bus type's PM callbacks, it isn't
necessary to use the __weakly defined wrappers around the generinc
runtime PM callbacks in the platform bus type any more.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
shmobile platforms replace the runtime PM callbacks of the platform
bus type with their own routines, but this means that the callbacks
are replaced system-wide. This may not be the right approach if the
platform devices on the system are not of the same type (e.g. some
of them belong to an SoC and the others are located in separate
chips), because in those cases they may require different handling.
Thus it is better to use power domains to override the platform bus
type's PM handling, as it generally is possible to use different
power domains for devices with different PM requirements.
Define a default power domain for shmobile in both the SH and ARM
falvors and use it to override the platform bus type's PM callbacks.
Since the suspend and hibernate callbacks of the new "default" power
domains need to be the same and the platform bus type's suspend and
hibernate callbacks for the time being, export those callbacks so
that can be used outside of the platform bus type code.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Export the default PM callbacks defined for the platform bus type so
that they can be used by power domains for suspending and resuming
platform devices in the future.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Change the PM core's behavior related to power domains in such a way
that, if a power domain is defined for a given device, its callbacks
will be executed instead of and not in addition to the device
subsystem's PM callbacks.
The idea behind the initial implementation of power domains handling
by the PM core was that power domain callbacks would be executed in
addition to subsystem callbacks, so that it would be possible to
extend the subsystem callbacks by using power domains. It turns out,
however, that this wouldn't be really convenient in some important
situations.
For example, there are systems in which power can only be removed
from entire power domains. On those systems it is not desirable to
execute device drivers' PM callbacks until it is known that power is
going to be removed from the devices in question, which means that
they should be executed by power domain callbacks rather then by
subsystem (e.g. bus type) PM callbacks, because subsystems generally
have no information about what devices belong to which power domain.
Thus, for instance, if the bus type in question is the platform bus
type, its PM callbacks generally should not be called in addition to
power domain callbacks, because they run device drivers' callbacks
unconditionally if defined.
While in principle the default subsystem PM callbacks, or a subset of
them, may be replaced with different functions, it doesn't seem
correct to do so, because that would change the subsystem's behavior
with respect to all devices in the system, regardless of whether or
not they belong to any power domains. Thus, the only remaining
option is to make power domain callbacks take precedence over
subsystem callbacks.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kevin Hilman <khilman@ti.com>
We don't actually hold the socket lock at this point, so the
rcu_dereference_protected() isn't' correct. Thanks to Eric
Dumazet for pointing this out.
Thankfully, we're only interested in fetching the faddr value
if srr is enabled, so we can simply make this an RCU sequence
and use plain rcu_dereference().
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b9367bf3ee ("net: ibmveth: convert to hw_features") accidentally
removed call to ibmveth_set_csum_offload() in ibmveth_probe(). Put the
call back where it was, but with additional error checking provided
by ibmveth_set_features().
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
[sfr: dev -> netdev]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
o Memory allocated in ETHTOOL_ACTIVE mode, is not getting freed. So,
in ETHTOOL_ID_INACTIVE mode, return after freeing allocated memory.
o Using set bit instead of blink_down field, as it is also required
in internal Loopback test and etc.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using a bitmap instead of separate u32 flags allows a consistent, simpler
and more extensible mechanism to determine capabilities.
Convert bitmasks to enum.
Add tg3_flag, tg3_flag_clear and tg3_flag_set.
Convert the flag & bitmask tests.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas asked about the delayed irq work in the alarmtimers code,
and I realized that it was a legacy from when the alarmtimer base
lock was a mutex (due to concerns that we'd be interacting with
the RTC device, which is protected by mutexes).
Since the alarmtimer base is now protected by a spinlock, we can
simply execute alarmtimer functions directly from the hrtimer
callback. Should any future alarmtimer functions sleep, they can
simply manage scheduling any delayed work themselves.
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
This patch addresses a number of minor comment improvements and
other minor issues from Thomas' review of the alarmtimers code.
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The 88e6085 has a few differences from the other devices in the port
control registers, causing unknown multicast/broadcast packets to get
dropped when using the standard port setup.
At the same time update kconfig to clarify that the mv88e6085 is now
supported.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETIF_F_HIGHDMA is like any other TX offloads, so allow user to toggle it.
This is needed later for bridge and bonding convertsion to hw_features.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Note: netdev_update_features() needs only rtnl_lock as br->port_list
is only changed while holding it.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>