Commit graph

254,703 commits

Author SHA1 Message Date
Linus Torvalds
be91bfebf2 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nouveau: allocate kernel's notifier object at end of block
2011-03-04 17:30:32 -08:00
Neil Horman
e9e3d724e2 nfs4: Ensure that ACL pages sent over NFS were not allocated from the slab (v3)
The "bad_page()" page allocator sanity check was reported recently (call
chain as follows):

  bad_page+0x69/0x91
  free_hot_cold_page+0x81/0x144
  skb_release_data+0x5f/0x98
  __kfree_skb+0x11/0x1a
  tcp_ack+0x6a3/0x1868
  tcp_rcv_established+0x7a6/0x8b9
  tcp_v4_do_rcv+0x2a/0x2fa
  tcp_v4_rcv+0x9a2/0x9f6
  do_timer+0x2df/0x52c
  ip_local_deliver+0x19d/0x263
  ip_rcv+0x539/0x57c
  netif_receive_skb+0x470/0x49f
  :virtio_net:virtnet_poll+0x46b/0x5c5
  net_rx_action+0xac/0x1b3
  __do_softirq+0x89/0x133
  call_softirq+0x1c/0x28
  do_softirq+0x2c/0x7d
  do_IRQ+0xec/0xf5
  default_idle+0x0/0x50
  ret_from_intr+0x0/0xa
  default_idle+0x29/0x50
  cpu_idle+0x95/0xb8
  start_kernel+0x220/0x225
  _sinittext+0x22f/0x236

It occurs because an skb with a fraglist was freed from the tcp
retransmit queue when it was acked, but a page on that fraglist had
PG_Slab set (indicating it was allocated from the Slab allocator (which
means the free path above can't safely free it via put_page.

We tracked this back to an nfsv4 setacl operation, in which the nfs code
attempted to fill convert the passed in buffer to an array of pages in
__nfs4_proc_set_acl, which gets used by the skb->frags list in
xs_sendpages.  __nfs4_proc_set_acl just converts each page in the buffer
to a page struct via virt_to_page, but the vfs allocates the buffer via
kmalloc, meaning the PG_slab bit is set.  We can't create a buffer with
kmalloc and free it later in the tcp ack path with put_page, so we need
to either:

1) ensure that when we create the list of pages, no page struct has
   PG_Slab set

 or

2) not use a page list to send this data

Given that these buffers can be multiple pages and arbitrarily sized, I
think (1) is the right way to go.  I've written the below patch to
allocate a page from the buddy allocator directly and copy the data over
to it.  This ensures that we have a put_page free-able page for every
entry that winds up on an skb frag list, so it can be safely freed when
the frame is acked.  We do a put page on each entry after the
rpc_call_sync call so as to drop our own reference count to the page,
leaving only the ref count taken by tcp_sendpages.  This way the data
will be properly freed when the ack comes in

Successfully tested by myself to solve the above oops.

Note, as this is the result of a setacl operation that exceeded a page
of data, I think this amounts to a local DOS triggerable by an
uprivlidged user, so I'm CCing security on this as well.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
CC: security@kernel.org
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04 17:28:52 -08:00
Eric Dumazet
65e8354ec1 inetpeer: seqlock optimization
David noticed :

------------------
Eric, I was profiling the non-routing-cache case and something that
stuck out is the case of calling inet_getpeer() with create==0.

If an entry is not found, we have to redo the lookup under a spinlock
to make certain that a concurrent writer rebalancing the tree does
not "hide" an existing entry from us.

This makes the case of a create==0 lookup for a not-present entry
really expensive.  It is on the order of 600 cpu cycles on my
Niagara2.

I added a hack to not do the relookup under the lock when create==0
and it now costs less than 300 cycles.

This is now a pretty common operation with the way we handle COW'd
metrics, so I think it's definitely worth optimizing.
-----------------

One solution is to use a seqlock instead of a spinlock to protect struct
inet_peer_base.

After a failed avl tree lookup, we can easily detect if a writer did
some changes during our lookup. Taking the lock and redo the lookup is
only necessary in this case.

Note: Add one private rcu_deref_locked() macro to place in one spot the
access to spinlock included in seqlock.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-04 14:33:59 -08:00
David S. Miller
d72751ede1 Merge branch 'for-davem' of ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2011-03-04 12:48:25 -08:00
Sage Weil
455cec0abf ceph: no .snap inside of snapped namespace
Otherwise you can do things like

# mkdir .snap/foo
# cd .snap/foo/.snap
# ls
<badness>

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04 12:25:09 -08:00
Sage Weil
e00de341fd libceph: fix msgr standby handling
The standby logic used to be pretty dependent on the work requeueing
behavior that changed when we switched to WQ_NON_REENTRANT.  It was also
very fragile.

Restructure things so that:
 - We clear WRITE_PENDING when we set STANDBY.  This ensures we will
   requeue work when we wake up later.
 - con_work backs off if STANDBY is set.  There is nothing to do if we are
   in standby.
 - clear_standby() helper is called by both con_send() and con_keepalive(),
   the two actions that can wake us up again.  Move the connect_seq++
   logic here.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04 12:25:05 -08:00
Sage Weil
e76661d0a5 libceph: fix msgr keepalive flag
There was some broken keepalive code using a dead variable.  Shift to using
the proper bit flag.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04 12:24:31 -08:00
Sage Weil
60bf8bf881 libceph: fix msgr backoff
With commit f363e45f we replaced a bunch of hacky workqueue mutual
exclusion logic with the WQ_NON_REENTRANT flag.  One pieces of fallout is
that the exponential backoff breaks in certain cases:

 * con_work attempts to connect.
 * we get an immediate failure, and the socket state change handler queues
   immediate work.
 * con_work calls con_fault, we decide to back off, but can't queue delayed
   work.

In this case, we add a BACKOFF bit to make con_work reschedule delayed work
next time it runs (which should be immediately).

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-04 12:24:28 -08:00
John W. Linville
85a7045a90 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-03-04 14:10:40 -05:00
Stanislaw Gruszka
410f2bb30d iwlwifi: avoid too frequent recover from statistics
Usually H/W generate statistics notify once per about 100ms, but
sometimes we can receive notify in shorter time, even 2 ms.

This can be problem for plcp health and ack health checking.

I.e. with 2 plcp errors happens randomly in 2 ms duration, we
exceed plcp delta threshold equal to 100 (2*100/2).

Also checking ack's in short time, can results not necessary false
positive and firmware reset, for example when channel is noised and
we do not receive ACKs frames or when remote device does not send
ACKs at the moment.

Patch change code to do statistic check and possible recovery only
if 99ms elapsed from last check. Forced delay should assure we have
good statistic data to estimate hardware state.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:50 -05:00
Stanislaw Gruszka
6198c387b2 iwlwifi: cleanup iwl_good_plcp_health
Make iwl_good_plcp_health code easiest to read.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:50 -05:00
Stanislaw Gruszka
466a19a003 iwlwifi: move rx handlers code to iwl-rx.c
Put generic rx_handlers (except iwlagn_rx_reply_compressed_ba) to
iwl-rx.c . Make functions static and change prefix from iwlagn_ to
iwl_ . Beautify iwl_setup_rx_handlers and do some other minor coding
style changes.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:50 -05:00
Helmut Schaa
9d468d2269 mac80211: Remove redundant preamble and RTS flag setup in minstrel_ht
mac80211 does the same afterwards anyway. Hence, just drop
this redundant code.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:50 -05:00
Ben Greear
db7889cda3 ath9k: Fix txq memory address printing in debugfs.
No use printing addresses of pointers, just print the
pointers themselves.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:49 -05:00
Gertjan van Wingerde
557d99a269 rt2x00: Remove unused rt2x00queue_get_queue function.
Now that all accesses to the data_queue structures is done via the specialized
rt2x00queue_get_tx_queue function or via direct accesses, there is no
need for the rt2x00queue_get_queue function anymore, so remove it.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:49 -05:00
Gertjan van Wingerde
a24408307e rt2x00: Optimize getting the beacon queue structure.
In the spirit of optimizing the code to get the queue structure of TX queues,
also optimize the code to get beacon queues. We can simply use the bcn queue
field of the rt2x00_dev structure instead of using the rt2x00queue_get_queue
function.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:49 -05:00
Gertjan van Wingerde
61c6e4893f rt2x00: Include ATIM queue support in rt2x00queue_get_tx_queue.
The ATIM queue is considered to be a TX queue by the drivers that support
the queue. Therefore include support for the ATIM queue to the
rt2x00queue_get_tx_queue function so that the drivers that support the ATIM
queue can also use that function.

Add the support in such a way that drivers that do not support the ATIM
queue are not penalized in their efficiency.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:49 -05:00
Gertjan van Wingerde
e74df4a756 rt2x00: Don't treat ATIM queue as second beacon queue.
Current code for the atim queue is strange, as it is considered in the
rt2x00_dev structure as a second beacon queue.
Normalize this by letting the atim queue have its own struct data_queue
pointer in the rt2x00_dev structure.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:49 -05:00
Helmut Schaa
3736fe5808 rt2x00: Fix comment in rt2800pci
We don't use interrupt threads anymore. Fix the comment.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:49 -05:00
Helmut Schaa
0aa13b2e06 rt2x00: Revise irqmask locking for PCI devices
The PCI device irqmask is locked by a spin_lock. Currently
spin_lock_irqsave is used everywhere. To reduce the locking overhead
replace spin_lock_irqsave in hard irq context with spin_lock and in
soft irq context with spin_lock_irq.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:48 -05:00
Helmut Schaa
567108ebd3 rt2x00: Remove now unused crypto.aid field
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:48 -05:00
Helmut Schaa
1ed3811c33 rt2x00: Fix rt2800 key assignment in multi bssid setups
When setting up multiple BSSIDs in AP mode on an rt2800pci device we
previously used the STAs AID to select an appropriate key slot. But
since the AID is per VIF we can end up with two STAs having the same AID
and thus using the same key index. This resulted in one STA overwriting
the key information of another STA.

Fix this by simply searching for the next unused entry in the pairwise
key table.

Also bring the key table init in sync with deleting keys by initializing
the key table entries to 0 instead of 1.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:48 -05:00
Helmut Schaa
4df10c8c13 rt2x00: Use an enum instead of u16 for the rate_mode TX descriptor field
This makes the code less error-prone.

Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:48 -05:00
Helmut Schaa
55b585e290 rt2x00: Don't call ieee80211_get_tx_rate for MCS rates
ieee80211_get_tx_rate is not valid for HT rates. Hence, restructure the
TX desciptor creation to be aware of MCS rates. The generic TX desciptor
creation now cares about the rate_mode (CCK, OFDM, MCS, GF).

As a result, ieee80211_get_tx_rate gets only called for legacy rates.

Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:48 -05:00
Helmut Schaa
2517794b70 rt2x00: Move TX descriptor field "ifs" into plcp substruct
"ifs" is only used by no-HT devices. Move it into the plcp substruct and
fill in the value only for no-HT devices.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
Ivo van Doorn
fe107a5234 rt2x00: Optimize TX descriptor memory layout
Some fields only need to be u8 and for ifs and txop we can use the
already available enums.

Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
Helmut Schaa
26a1d07f41 rt2x00: Optimize TX descriptor handling
HT and no-HT rt2x00 devices use a partly different TX descriptor.
Optimize the tx desciptor memory layout by putting the PLCP and HT
substructs into a union and introduce a new driver flag to decide which
TX desciptor format is used by the device.

This saves us the expensive PLCP calculation fOr HT devices and the HT
descriptor setup on no-HT devices.

Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
Helmut Schaa
7fe7ee7776 rt2x00: Generate sw sequence numbers only for devices that need it
Newer devices like rt2800* own a hardware sequence counter and thus
don't need to use a software sequence counter at all. Add a new driver
flag to shortcut the software sequence number generation on devices that
don't need it.

rt61pci, rt73usb and rt2800* seem to make use of a hw sequence counter
while rt2400pci and rt2500* need to do it in software.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
Helmut Schaa
208f19dcee rt2x00: Use unlikely for unexpected error condition in rt2x00_mac_tx
rt2x00queue_write_tx_frame is unlikely to fail. Tell the compiler.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
Helmut Schaa
5356d96330 rt2x00: Add unlikely macro to special case tx status handling
This special case shouldn't happen very often. Only if a frame that
is not intended to be aggregated ends up in an AMPDU _and_ was intended
to be sent at a different MCS rate as the aggregate. Hence, using
unlikely is justified.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
Helmut Schaa
c262e08b79 rt2x00: Remove useless NULL check
Since tx_info->control.vif was already accessed before it cant't be NULL
here.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:47 -05:00
Helmut Schaa
87443e875c rt2x00: Make use of unlikely during tx status processing
These conditions are unlikely to happen, tell the compiler.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:46 -05:00
Helmut Schaa
11f818e0eb rt2x00: Optimize calls to rt2x00queue_get_queue
In some cases (tx path for example) we don't need to check for non-tx
queues in rt2x00queue_get_queue. Hence, introduce a new method
rt2x00queue_get_tx_queue that is only valid for tx queues and use it in
places where only tx queues are valid.

Furthermore, this new method is quite short and as such can be inlined
to avoid the function call overhead.

This only converts the txdone functions of drivers that don't use an ATIM
queue and the generic tx path.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:06:46 -05:00
Gabor Juhos
adde5882bc rt2x00: fix whitespace damage in the rt2800 specific code
The rt2800 specific code contains a lots of whitespace damage caused by
the commit 'rt2x00: Add support for RT5390 chip'.

This patch fixes those whitespace errors.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:18 -05:00
Rafał Miłecki
ba9a621453 b43: N-PHY: rev3+: implement gain ctl workarounds
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:18 -05:00
Rafał Miłecki
9838985162 b43: N-PHY: rev3+: add tables with gain ctl workarounds
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:18 -05:00
Rafał Miłecki
0f4091b9af b43: N-PHY: rev3+: correct switching analog core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:17 -05:00
Michael Buesch
a7a9a24dcd lib-average: Make config option selectable
Make CONFIG_AVERAGE selectable for out-of-tree users
such as compat-wireless.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:17 -05:00
Vasanthakumar Thiagarajan
b06af7a57d ath9k_hw: Read noise floor only for available chains for AR9003
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:17 -05:00
Vasanthakumar Thiagarajan
582d00641b ath9k: Add a debugfs interface to dump chip registers
/<debugfs_root>/ieee80211/phyX/ath9k/regdump is the interface
to dump the registers.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:17 -05:00
Larry Finger
6410db593e rtl8187: Change rate-control feedback
The driver for the RTL8187L chips returns IEEE80211_TX_STAT_ACK for all
packets, even if the maximum number of retries was exhausted. In addition
it fails to setup max_rates in the ieee80211_hw struct, This behavior
may be responsible for the problems noted in Bug 14168. As the bug is very
old, testers have not been found, and I do not have the case where the
indicated signal is less than -70 dBm.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:17 -05:00
John W. Linville
1ffe4dd126 rtlwifi: usb parts should depend on CONFIG_USB
ERROR: "usb_unanchor_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_control_msg" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_submit_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_get_dev" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_kill_anchored_urbs" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_put_dev" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_free_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_anchor_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
ERROR: "usb_alloc_urb" [drivers/net/wireless/rtlwifi/rtlwifi.ko] undefined!
make[2]: *** [__modpost] Error 1
make[1]: *** [modules] Error 2
make: *** [sub-make] Error 2

The USB-part of rtlwifi should depend on CONFIG_USB.  This also
corrects the existing check for CONFIG_PCI to build pci.o.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-04 14:05:16 -05:00
John W. Linville
e2ab758d16 Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6 2011-03-04 14:01:20 -05:00
John W. Linville
95f84f2959 Merge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx 2011-03-04 14:00:29 -05:00
John W. Linville
a177584609 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6 2011-03-04 13:59:44 -05:00
Ram Pai
c8adf9a3e8 PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.
Linux tries to pre-allocate minimal resources to hotplug bridges. This
works fine as long as there are enough resources  to satisfy all other
genuine resource requirements. However if enough resources are not
available to satisfy any of these nice-to-have pre-allocations, the
resource-allocator reports errors and returns failure.

This patch distinguishes between must-have resource from nice-to-have
resource.  Any failure to allocate nice-to-have resources are ignored.

This behavior can be particularly useful to trigger automatic
reallocation when the OS discovers genuine allocation-conflicts or
genuine unallocated-requests caused by buggy allocation behavior of the
native BIOS/uEFI.

https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the
movitation behind the patch. This patch is verified to resolve the above
bug.

    changelog v2:  o  fixed a bug where pci_assign_resource() was called on a
    		  resource of zero resource size.

    changelog v3:  addressed Bjorn's comment
    	       o  "Please don't indent and right-justify the changelog".
    	       o  removed add_size from struct resource.  The additional
    		  size is now tracked using a linked list.

    changelog v4:  o moved freeing up of elements in head list from
    		assign_requested_resources_sorted() to
    		__assign_resources_sorted().
    	       o removed a wrong reference to 'add_size' in
    			pbus_size_mem().
    	       o some code optimizations in adjust_resources_sorted()
    			and assign_requested_resources_sorted()

    changelog v5:  o moved freeing up of elements in head list from
    		assign_requested_resources_sorted() to
    		__assign_resources_sorted().
    	       o removed a wrong reference to 'add_size' in
    			pbus_size_mem().
    	       o some code optimizations in adjust_resources_sorted()
    			and assign_requested_resources_sorted()

    changelog v5:  o factored out common code and made them into
		separate independent patches
    	       o added comments in kdoc format
	       o added a BUG_ON in pci_assign_unassigned_resources()
		 to catch for memory leak.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:46:47 -08:00
Ram Pai
fc075e1da1 PCI: introduce reset_resource()
Introduce reset_resource() which factors out resource reset logic.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:46:16 -08:00
Ram Pai
094732a520 PCI: data structure agnostic free list function
Replace free_failed_list() with a free_list() call. free_list() can
handle 'resource_list_x', 'resource_list' and any linked list linked
through ->next

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:46:04 -08:00
Ram Pai
13583b1659 PCI: refactor io size calculation code
Refactor code that calculates the io size in pbus_size_io() and
pbus_mem_io() into separate functions.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04 10:45:48 -08:00
Dave Kleikamp
3256f80fbb MAINTAINERS: Update shaggy's email address
Signed-off-by: Dave Kleikamp <shaggy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04 10:44:06 -08:00