Commit graph

254,703 commits

Author SHA1 Message Date
Victor Rodriguez
5f72f38009 davinci: EDMA support for Omapl138-Hawkboard
This patch adds EDMA support for the Hawkboard-L138 system

Signed-off-by: Victor Rodriguez <vm.rod25@gmail.com>
Tested-by: Rene Gonzalez <renegs.2378@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28 14:53:28 -08:00
Victor Rodriguez
bb59b7fdc1 davinci: EMAC support for Omapl138-Hawkboard
This patch adds EMAC support for the Hawkboard-L138 system

Signed-off-by: Victor Rodriguez <vm.rod25@gmail.com>
Tested-by: Rene Gonzalez <renegs.2378@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28 14:53:28 -08:00
Kevin Hilman
3ba789c091 MAINTAINERS: update TI DaVinci machine support entry
Update my email address, and add Sekhar Nori as co-maintainer of TI
DaVinci family of SoCs.

Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28 14:53:28 -08:00
Hirosh Dabui
c284d9fa48 davinci: tnetv107x: fix register indexing for GPIOs numbers > 31
This patch fix a bug in the register indexing for GPIOs numbers >  31
to get the relevant hardware registers of tnetv107x to control the GPIOs.

In the structure tnetv107x_gpio_regs:

struct tnetv107x_gpio_regs {
            u32     idver;
            u32     data_in[3];
            u32     data_out[3];
            u32     direction[3];
            u32     enable[3];
};

The GPIO hardware register addresses of tnetv107x are stored.
The chip implements 3 registers of each entity to serve 96 GPIOs,
each register provides a subset of 32 GPIOs.
The driver provides these macros: gpio_reg_set_bit, gpio_reg_get_bit
and gpio_reg_clear_bit.

The bug implied the use of macros to access the relevant hardware
register e.g. the driver code used the macro like this:
'gpio_reg_clear_bit(&reg->data_out, gpio)'

But it has to be used like this:
'gpio_reg_clear_bit(reg->data_out, gpio)'.

The different results are shown here:
- &reg->data_out + 1 (it will add the full array size of data_out i.e. 12 bytes)
- reg->data_out + 1 (it will increment only the size of data_out i.e. only 4 bytes)

Acked-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Hirosh Dabui <hirosh.dabui@snom.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28 14:53:19 -08:00
Rajashekhara, Sudhakar
b3d1ffb2a5 davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio
After the multi-component commit f0fba2ad (ASoC: multi-component - ASoC
Multi-Component Support) for ASoC, we need to register the platform
device for davinci-pcm-audio.

This patch and patch at [1] are required for audio to work on
DA850/OMAP-L138.

[1] https://patchwork.kernel.org/patch/495211/

Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-02-28 14:53:19 -08:00
Michael Hennerich
a2396dfc63 IIO: ADC: AD799x: Update timestamp handling
Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:56 -08:00
Michael Hennerich
dcfb0863ee IIO: ADC: AD7606: Update timestamp handling
Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:56 -08:00
Michael Hennerich
e08d02658c IIO: ADC: AD7887: Update timestamp handling
Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:55 -08:00
Michael Hennerich
86f702ab1d IIO: ADC: AD7476: Update timestamp handling
Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:55 -08:00
Michael Hennerich
fc7f95a946 IIO: Documentation: iio_utils: fix mask generation
Variable sizeint is used uninitialized.
Remove sizeint completely and use bits_used instead.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:24 -08:00
Michael Hennerich
7ccd4506fa IIO: Documentation: iio_utils: Prevent buffer overflow
The first part of build_channel_array()identifies the number of enabled channels.
Further down this count is used to allocate the ci_array. The next section parses the
scan_elements directory again, and fills ci_array regardless if the channel is enabled or not.
So if less than available channels are enabled ci_array memory is overflowed.

This fix makes sure that we allocate enough memory. But the whole approach looks a bit
cumbersome to me. Why not allocate memory for MAX_CHANNLES, less say 64
(I never seen a part with more than that channels). And skip the first part entirely.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:23 -08:00
Michael Hennerich
2bf99c70ce IIO: Documentation: iio_utils: style consistency fix
No functional changes

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:23 -08:00
Michael Hennerich
cb771cbdbd IIO: Documentation: iio_utils: Avoid double free()
filename is used and freed later

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:22 -08:00
Michael Hennerich
065896e904 IIO: Documentation: generic_buffer example: Avoid NULL pointer dereference
In case optarg n is not given return/exit

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 14:40:22 -08:00
Michael Hennerich
7c31b984c4 IIO: ADC: New driver for the AD7298 8-channel SPI ADC
This patch adds support for the
AD7298:  8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor
via SPI bus.

This patch replaces the existing ad7298.c driver completely.
It was necessary since, the old driver did not comply with the
IIO ABI for such devices.

Changes since V1:
IIO: ADC: New driver for the AD7298 8-channel SPI ADC

Add documentation for new sysfs file tempX_input.
Simplify bit defines.
Remove outdated comments.
Fix indention style.
ad7298_show_temp():
	Add locking.
	Simplify temperature calculation.
	Change temperature result from degrees into milli degrees Celsius.
	Rename file according to new sysfs ABI documentation

Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Reviewed-by: Shubhrajyoti <Shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 13:39:54 -08:00
Manohar Vanga
5bfcf90bfb staging: vme: remove unreachable code
Remove some more unreachable code found in bridges/vme_ca91cx42.c
and bridges/vme_tsi148.c

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 13:30:07 -08:00
Manohar Vanga
b004646779 staging: vme: remove unreachable code
Remove some unreachable code (kfree calls) from vme.c

Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 13:30:07 -08:00
Amerigo Wang
e364a3416d bonding: use the correct size for _simple_hash()
Clearly it should be the size of ->ip_dst here.
Although this is harmless, but it still reads odd.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:21:28 -08:00
Dan Carpenter
c976cc3aa9 Staging: generic_serial: fix double locking bug
spin_lock_irqsave() is not nestable.  The second time that it gets
called it overwrites the "flags" variable and so IRQs can't be restored
properly.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-28 13:21:20 -08:00
Hegde, Vinay
0a5f384677 davinci_emac: Add Carrier Link OK check in Davinci RX Handler
This patch adds an additional check in the Davinci EMAC RX Handler,
which tests the __LINK_STATE_NOCARRIER flag along with the
__LINK_STATE_START flag as part EMAC shutting down procedure.

This avoids
WARNING: at drivers/net/davinci_emac.c:1040 emac_rx_handler+0xf8/0x120()
during rtcwake used to suspend the target for a specified duration.

Signed-off-by: Hegde, Vinay <vinay.hegde@ti.com>
Acked-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:16:14 -08:00
Dmitry Kravkov
b746f7e52f bnx2x: update driver version to 1.62.00-6
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:14:50 -08:00
Vladislav Zolotarov
e4e3c02a1a bnx2x: properly calculate lro_mss
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:14:49 -08:00
Vladislav Zolotarov
63135281af bnx2x: perform statistics "action" before state transition.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:14:48 -08:00
Dmitry Kravkov
ff80ee029b bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode).
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:14:48 -08:00
Dmitry Kravkov
633ac3637a bnx2x: Fix ethtool -t link test for MF (non-pmf) devices.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:14:47 -08:00
Dmitry Kravkov
d4215ef71f bnx2x: Fix nvram test for single port devices.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:14:47 -08:00
Dmitry Kravkov
faa6fcbbba bnx2x: (NPAR mode) Fix FW initialization
Fix FW initialization according to max BW stored in percents
 for NPAR mode. Protect HW from being configured to speed 0.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 13:14:46 -08:00
Paul Walmsley
38698bef54 OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init
Set up the GPTIMER hwmod used for the clockevent source immediately
before it is used.  This avoids the need to set up all of the hwmods
until the boot process is further along.  (In general, we want to defer
as much as possible until late in the boot process.)

This second version fixes a bug pointed out by Santosh Shilimkar
<santosh.shilimkar@ti.com>, that would cause the kernel to use an
incorrect timer hwmod name if the selected GPTIMER was not 1 or 12 -
thanks Santosh.  Also, Tarun Kanti DebBarma <tarun.kanti@ti.com>
pointed out that the original patch did not apply cleanly; this has
now been fixed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
2011-02-28 14:04:35 -07:00
Justin P. Mattock
3c26bdb423 jbd: Remove one to many n's in a word.
The Patch below removes one to many "n's" in a word..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-02-28 21:55:58 +01:00
Amir Goldstein
ce654b37f8 ext3: skip orphan cleanup on rocompat fs
Orphan cleanup is currently executed even if the file system has some
number of unknown ROCOMPAT features, which deletes inodes and frees
blocks, which could be very bad for some RO_COMPAT features.

This patch skips the orphan cleanup if it contains readonly compatible
features not known by this ext3 implementation, which would prevent
the fs from being mounted (or remounted) readwrite.

Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-02-28 21:55:58 +01:00
Josh Hunt
03885ac3c7 ext2: Fix link count corruption under heavy link+rename load
vfs_rename_other() does not lock renamed inode with i_mutex. Thus changing
i_nlink in a non-atomic manner (which happens in ext2_rename()) can corrupt
it as reported and analyzed by Josh.

In fact, there is no good reason to mess with i_nlink of the moved file.
We did it presumably to simulate linking into the new directory and unlinking
from an old one. But the practical effect of this is disputable because fsck
can possibly treat file as being properly linked into both directories without
writing any error which is confusing. So we just stop increment-decrement
games with i_nlink which also fixes the corruption.

CC: stable@kernel.org
CC: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-02-28 21:55:43 +01:00
Paul Walmsley
a2debdbd1a OMAP2+: hwmod: add ability to setup individual hwmods
Add omap_hwmod_setup_one(), which is intended for use early in boot to
selectively setup the hwmods needed for system clocksources and
clockevents, and any other hwmod that is needed in early boot.
omap_hwmod_setup_all() can then be called later in the boot process.
The point is to minimize the amount of code that needs to be run
early.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2011-02-28 13:55:08 -07:00
Paul Walmsley
48d54f3fd2 OMAP2+: hwmod: ignore attempts to re-setup a hwmod
Previously, if a hwmod had already been set up, and the code attempted
to set up the hwmod again, an error would be returned.  This is not
really useful behavior if we wish to allow the OMAP core code to setup
the hwmods needed for the Linux clocksources and clockevents before
the rest of the hwmods are setup.  So, instead of generating errors,
just ignore the attempt to re-setup the hwmod.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
2011-02-28 13:55:08 -07:00
Paul Walmsley
569edd705c OMAP2+: hwmod: find MPU initiator hwmod during in _register()
Move the code that looks for the MPU initiator hwmod to run during
the individual hwmod _register() function.  (Previously, it ran after
all hwmods were registered in the omap_hwmod_late_init() function.)

This is done so code can late-initialize a few individual hwmods --
for example, for the system timer -- before the entire set of hwmods is
initialized later in boot via omap_hwmod_late_init().

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
2011-02-28 13:55:08 -07:00
Roopa Prabhu
8da83f8e73 enic: Flush driver cache of registered addr lists during port profile disassociate
During a port profile disassociate all address registrations for the interface
are blown away from the adapter. This patch resets the driver cache of
registered address lists to zero after a port profile disassociate.

Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:42:18 -08:00
Ben Dooks
85e6b8c5d8 DM9000: Allow randomised ethernet address
Allow randomised ethernet address if the device does not have a valid
EEPROM or pre-set MAC address.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:42:17 -08:00
stephen hemminger
6f2e154b68 qla3xxx: add missing __iomem annotation
Add necessary annotations about pointer to io memory space
that is checked by sparse.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:42:16 -08:00
Stephen Boyd
bd32344a6b msm: clock: Migrate to clkdev
Migrating to clkdev has several advantages:

 * Less code in mach-msm/clock.c

 * A more robust clk_get() implementation

 * clk_add_alias() support

 * clk_get_sys() support

In general, this will help board authors setup clock aliases and
break the dependency on device pointers in the clock tables.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28 12:40:17 -08:00
Stephen Boyd
2a52220c89 msm: clock: Remove references to clk_ops_pcom
Not all devices use proc_comm and determining if a clock is local
vs. remote is fragile when done by comparing clk_ops pointers.
Instead, implement an is_local() function for all clk_ops to
determine if the clock is local. Doing this allows us to remove
the last references to clk_ops_pcom from clock.c and compile it
for targets with CONFIG_MSM_PROC_COMM=n.

We don't need to set the clk_ops at runtime until 7x30 local
clock detection comes in. Right now it's just complicating things
so just set the ops pointer statically.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28 12:40:05 -08:00
Stephen Boyd
0693a317b6 msm: headsmp.S: Fix section mismatch
WARNING: vmlinux.o(.cpuinit.text+0xc80): Section mismatch in
reference from the function boot_secondary() to the variable
.init.text:msm_secondary_startup
The function __cpuinit boot_secondary() references a variable
__init msm_secondary_startup.  If msm_secondary_startup is only
used by boot_secondary then annotate msm_secondary_startup with
a matching annotation.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28 12:40:05 -08:00
David Brown
3162aa2f1b msm: Use explicit GPLv2 licenses
Replace a BSD-style license in Code Aurora Forum authored files with
an explicit GPLv2.

Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28 12:40:05 -08:00
stephen hemminger
4ec952b8ab bonding: fix sparse warning
Fix use of zero where NULL expected. And wrap long line.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:39:58 -08:00
Lars Ellenberg
e3fa3aff0c net: fix nla_policy_len to actually _iterate_ over the policy
Currently nla_policy_len always returns n * NLA_HDRLEN:
It loops, but does not advance it's iterator.
NLA_UNSPEC == 0 does not contain a .len in any policy.

Trivially fixed by adding p++.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:38:25 -08:00
Rémi Denis-Courmont
f5a4532528 f_phonet: avoid pskb_pull(), fix OOPS with CONFIG_HIGHMEM
This is similar to what we already do in cdc-phonet.c in the same
situation. pskb_pull() refuses to work with HIGHMEM, even if it is
known that the socket buffer is entirely in "low" memory.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:36:39 -08:00
Axel Lin
9eb0e6f26e net/fec: fix unterminated platform_device_id table
The platform_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:35:44 -08:00
Randy Dunlap
a90e81579d net: update Documentation/networking/00-INDEX
Clean up entries in 00-INDEX: drop files that have been removed.

Reported-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:33:19 -08:00
Anders Berggren
a693e69897 net: TX timestamps for IPv6 UDP packets
Enabling TX timestamps (SO_TIMESTAMPING) for IPv6 UDP packets, in
the same fashion as for IPv4. Necessary in order for NICs such as
Intel 82580 to timestamp IPv6 packets.

Signed-off-by: Anders Berggren <anders@halon.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:32:11 -08:00
Sergei Shtylyov
eaaa3a7c4d sis900: use pci_dev->revision
This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it wasn't
converted by commit 44c10138fd (PCI: Change all
drivers to use pci_device->revision).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:29:34 -08:00
Changli Gao
696ea472e1 llc: avoid skb_clone() if there is only one handler
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28 12:28:50 -08:00
Grant Likely
1c48a5c93d dt: Eliminate of_platform_{,un}register_driver
Final step to eliminate of_platform_bus_type.  They're all just
platform drivers now.

v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 13:22:46 -07:00