Commit graph

254,703 commits

Author SHA1 Message Date
Mike Galbraith
511f67a599 sched, autogroup: Stop claiming ownership of the root task group
Disown it, and only display autogroup association if one exists.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1298383320.8036.5.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:34:03 +01:00
Yong Zhang
800d4d30c8 sched, autogroup: Stop going ahead if autogroup is disabled
when autogroup is disable from the beginning,
sched_autogroup_create_attach()
  autogroup_move_group()                    <== 1
    sched_move_task()                       <== 2
      task_move_group_fair()
        set_task_rq()
          task_group()
            autogroup_task_group()

We go the whole path without doing anything useful.

Then stop going further if autogroup is disabled.

But there will be a race window between 1 and 2, in which
sysctl_sched_autogroup_enabled is enabled. This issue
will be toke by following patch.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1298185696-4403-4-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:59 +01:00
Yong Zhang
1747b21fec sched, autogroup, sysctl: Use proc_dointvec_minmax() instead
sched_autogroup_enabled has min/max value, proc_dointvec_minmax() is
be used for this case.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1298185696-4403-2-git-send-email-yong.zhang0@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:58 +01:00
Peter Zijlstra
866ab43efd sched: Fix the group_imb logic
On a 2*6*2 machine something like:

 taskset -c 3-11 bash -c 'for ((i=0;i<9;i++)) do while :; do :; done & done'

_should_ result in 9 busy CPUs, each running 1 task.

However it didn't quite work reliably, most of the time one cpu of the
second socket (6-11) would be idle and one cpu of the first socket
(0-5) would have two tasks on it.

The group_imb logic is supposed to deal with this and detect when a
particular group is imbalanced (like in our case, 0-2 are idle but 3-5
will have 4 tasks on it).

The detection phase needed a bit of a tweak as it was too weak and
required more than 2 avg weight tasks difference between idle and busy
cpus in the group which won't trigger for our test-case. So cure that
to be one or more avg task weight difference between cpus.

Once the detection phase worked, it was then defeated by the f_b_g()
tests trying to avoid ping-pongs. In particular, this_load >= max_load
triggered because the pulling cpu (the (first) idle cpu in on the
second socket, say 6) would find this_load to be 5 and max_load to be
4 (there'd be 5 tasks running on our socket and only 4 on the other
socket).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:57 +01:00
Peter Zijlstra
cc57aa8f4b sched: Clean up some f_b_g() comments
The existing comment tends to grow state (as it already has), split it
up and place it near the actual tests.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:56 +01:00
Peter Zijlstra
c186fafe9a sched: Clean up remnants of sd_idle
With the wholesale removal of the sd_idle SMT logic we can clean up
some more.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:33:55 +01:00
Ingo Molnar
d927dc9379 Merge commit 'v2.6.38-rc6' into sched/core
Merge reason: Pick up the latest fixes before queueing up new changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-23 11:31:38 +01:00
Marcin Slusarz
9826e8329b perf lock: Document valid sort keys
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110222205312.GA18474@joi.lan>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-23 07:29:33 -03:00
Arnaldo Carvalho de Melo
6435a5e39d perf top browser: Adjust the browser indexes when refreshing
This is not a problem when we're not at the bottom of the active symbols
list, so was not noticed, but at the end of the screen it falls apart.

Fix it by adjusting the ui_browser indexes according to the new number
of entries in the rb_tree and by seeking from the start of the rb_tree
to find the new symbol at the top of the screen.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-23 07:25:02 -03:00
Dirk Behme
6f644e5f97 UDF: Fix compiler warning
Fix compiler warning

fs/udf/balloc.c: In function 'udf_bitmap_new_block':
fs/udf/balloc.c:273: warning: passing argument 1 of '_find_next_bit_le' from incompatible pointer type
fs/udf/balloc.c:285: warning: passing argument 1 of '_find_next_bit_le' from incompatible pointer type
fs/udf/balloc.c:311: warning: passing argument 1 of '_find_next_bit_le' from incompatible pointer type
fs/udf/balloc.c:325: warning: passing argument 1 of '_find_next_bit_le' from incompatible pointer type

The main fix is to add a cast in ext2_find_next_bit().

As all other usage locations of udf_find_next_one_bit()
directly use bh->b_data (which is a char *), the useless
(char *) cast in line 311 can be removed, too.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-02-23 11:00:44 +01:00
Jan Kara
7e49b6f248 udf: Convert UDF to new truncate calling sequence
Use new truncation sequence in UDF and fix up error handling in the
code.

Signed-off-by: Jan Kara <jack@suse.cz>
2011-02-23 11:00:37 +01:00
Eric Dumazet
b3d41885d9 slub: fix kmemcheck calls to match ksize() hints
Recent use of ksize() in network stack (commit ca44ac38 : net: don't
reallocate skb->head unless the current one hasn't the needed extra size
or is shared) triggers kmemcheck warnings, because ksize() can return
more space than kmemcheck is aware of.

Pekka Enberg noticed SLAB+kmemcheck is doing the right thing, while SLUB
+kmemcheck doesnt.

Bugzilla reference #27212

Reported-by: Christian Casteyde <casteyde.christian@free.fr>
Suggested-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
CC: Changli Gao <xiaosuo@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-02-23 11:59:30 +02:00
Thomas Gleixner
c2a941fadb x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection
OLPC_OPENFIRMWARE_DT is just there to be selected by OLPC and selects
OF_PROMTREE. So let OLPC select OF_PROMTREE and remove that extra
config indirection. Fixup code and Makefile and use CONFIG_OF_PROMTREE
instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>
2011-02-23 10:40:45 +01:00
Thomas Gleixner
dc3119e700 x86: OLPC: Cleanup config maze completely
Neither CONFIG_OLPC_OPENFIRMWARE nor CONFIG_OLPC_OPENFIRMWARE_DT are
really necessary.

OLPC selects OLPC_OPENFIRMWARE unconditionally, so move the "select
OF" part under OLPC config option and fixup the dependencies in
Makefiles and code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>
2011-02-23 10:40:45 +01:00
Thomas Gleixner
fe239545a1 x86: OLPC: Hide OLPC_OPENFIRMWARE config switch
OLPC selects OLPC_OPENFIRMWARE unconditionally. If OLPC=n then
the OLPC_OPENFIRMWARE functionality is pointless.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>
2011-02-23 10:40:45 +01:00
Thomas Gleixner
540089798d x86: OLPC: Remove redundant !X64_64 config dependency
OLPC is under if X86_32 already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>
2011-02-23 10:40:45 +01:00
Arik Nemtsov
b622d992c2 wl12xx: AP-mode - management of links in PS-mode
Update the PS mode of each link according to a bitmap polled from
fw_status. Manually notify mac80211 about PS mode changes in connected
stations.

mac80211 will only be notified about PS start when the station is in PS
and there is a small number of TX blocks from this link ready in HW.
This is required for waking up the remote station since the TIM is
updated entirely by FW.

When a station enters mac80211-PS-mode, we drop all the skbs in the
low-level TX queues belonging to this sta with STAT_TX_FILTERED
to keep our queues clean.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:18:46 +02:00
Arik Nemtsov
09039f42a2 wl12xx: AP-mode - count free FW TX blocks per link
Count the number of FW TX blocks allocated per link. We add blocks to a
link counter when allocated for a TX descriptor. We remove blocks
according to counters in fw_status indicating the number of freed blocks
in FW. These counters are polled after each IRQ.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:18:46 +02:00
Arik Nemtsov
409622ecc2 wl12xx: AP mode - fix bug in cleanup of wl1271_op_sta_add()
Remove an active hlid when chip wakeup fails. In addition rename the
involved functions.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:18:46 +02:00
Arik Nemtsov
ba7c082a13 wl12xx: AP-mode - support HW based link PS monitoring
When operating in AP mode the wl1271 hardware filters out null-data
packets as well as management packets. This makes it impossible for
mac80211 to monitor the PS mode by using the PM bit of incoming frames.

Disable mac80211 automatic link PS-mode handling by supporting
IEEE80211_HW_AP_LINK_PS in HW flags.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:18:45 +02:00
Arik Nemtsov
1d36cd892c wl12xx: report invalid TX rate when returning non-TX-ed skbs
Report a TX rate idx of -1 and count 0 when returning untransmitted
skbs to mac80211 using ieee80211_tx_status(). Otherwise mac80211
tries to use the returned (essentially garbage) status.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:14:56 +02:00
Arik Nemtsov
a8c0ddb5ba wl12xx: AP-mode - TX queue per link in AC
When operating in AP-mode we require a per link tx-queue.
This allows us to implement HW assisted PS mode for links,
as well as regulate per-link FW TX blocks consumption.
Split each link into ACs to support future QoS for AP-mode.

AC queues are emptied in priority and per-link queues are
scheduled in a simple round-robin fashion.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:14:56 +02:00
Arik Nemtsov
99a2775d02 wl12xx: AP-mode - fix race condition on sta connection
If a sta starts transmitting immediately after authentication, sometimes
the FW deauthenticates it. Fix this by marking the sta "in-connection"
in FW before sending the autentication response.

The "in-connection" entry is automatically removed when connection
succeeds or after a timeout.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:14:55 +02:00
Arik Nemtsov
f4d08ddd3e wl12xx: fix potential race condition with TX queue watermark
Check the conditions for the high/low TX queue watermarks when the
spin-lock is taken. This prevents race conditions as tx_queue_count and
the flag checked are only modified when the spin-lock is taken.

The following race was in mind:
- Queues are almost full and wl1271_op_tx() will stop the queues, but it
  doesn't get the spin-lock yet.
- (on another CPU) tx_work_locked() dequeues 15 skbs from this queue and
  tx_queue_count is updated to reflect this
- wl1271_op_tx() does not check tx_queue_count after taking the
  spin-lock and incorrectly stops the queue.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:14:55 +02:00
Eliad Peller
6dc9fb3c78 wl12xx: always set mac_address when configuring ht caps
The mac_address should be set also when ht caps are disabled.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:11:20 +02:00
Eliad Peller
02ad2d9080 wl12xx: use standard ALIGN() macro
Use the standard ALIGN() macro instead of redefining similar macros.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23 11:11:19 +02:00
Florian Mickler
49495d44df amd64-agp: fix crash at second module load
The module forgot to sometimes unregister some resources.

This fixes Bug #22882.

[Patch updated to 2.6.38-rc3 by Randy Dunlap.]
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 18:29:17 +10:00
Thomas Gleixner
7acdbb3f35 Merge branch 'linus' into x86/platform
Reason: Import mainline device tree changes on which further patches
        depend on or conflict.

Trivial conflict in: drivers/spi/pxa2xx_spi_pci.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 09:21:41 +01:00
Senthilvadivu Guruswamy
d5e13227c3 OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init()
This patch updated board files to replace platform_device_register or
platform_add_devices of DSS with omap_display_init(). This moves away
registration of DSS from board files into a common place.

Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23 09:34:25 +02:00
Sumit Semwal
b7ee79abcc OMAP2, 3: DSS2: Create new file display.c for central dss driver registration.
A new file display.c is introduced for display driver init, which adds a function
omap_display_init to do the DSS driver registration. This is the first step in moving
away registration of DSS from board files into a common place.

Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23 09:33:27 +02:00
Senthilvadivu Guruswamy
1dde9732d5 OMAP2, 3: DSS2: Use Regulator init with driver name
Use driver name in regulator inits needed for display instead of using device
structure name.

Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23 09:33:07 +02:00
Senthilvadivu Guruswamy
e04d9e1e48 OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC
Hwmod needs database of all IPs in a system. This patch generates the hwmod
database for Display Sub System applicable for OMAP3430 and
OMAP36xx.  DSS is also considered as an IP as DISPC, RFBI and named as dss_core.
For all the IP modules in DSS, same clock is needed for enabling. Hwmod sees
DSS IPs as independent IPs, so same clock has to be repeated for .main_clk in
each IP.

This patch defines separate hwmod databases for OMAP3430ES1 and (OMAP3430ES2 and
OMAP36xx) as OMAP3430ES1 does not have IDLEST bit to poll on for dss IP, and also
the firewall regions are different between 3430es1 and later.

Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23 09:19:06 +02:00
Senthilvadivu Guruswamy
de56dbb6c1 OMAP2430: hwmod data: add DSS DISPC RFBI VENC
Hwmod needs database of all IPs in a system. This patch generates the hwmod
database for OMAP2430 Display Sub System. Since DSS is also considered as an
IP as DISPC, RFBI, name it as dss_core.

Acked-by: Benoit Cousson <b-cousson@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23 09:19:06 +02:00
Senthilvadivu Guruswamy
996746ca12 OMAP2420: hwmod data: add DSS DISPC RFBI VENC
Hwmod needs database of all IPs in a system. This patch generates the hwmod
database for OMAP2420 Display Sub System,. Since DSS is also considered as an
IP as DISPC, RFBI, name it as dss_core.

Acked-by: Benoit Cousson <b-cousson@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23 09:19:06 +02:00
Takashi Iwai
382225e62b ALSA: usb-audio: fix oops due to cleanup race when disconnecting
When a USB audio device is disconnected, snd_usb_audio_disconnect()
kills all audio URBs.  At the same time, the application, after being
notified of the disconnection, might close the device, in which case
ALSA calls the .hw_free callback, which should free the URBs too.

Commit de1b8b93a0 "[ALSA] Fix hang-up at disconnection of usb-audio"
prevented snd_usb_hw_free() from freeing the URBs to avoid a hang that
resulted from this race, but this introduced another race because the
URB callbacks could now be executed after snd_usb_hw_free() has
returned, and try to access already freed data.

Fix the first race by introducing a mutex to serialize the disconnect
callback and all PCM callbacks that manage URBs (hw_free and hw_params).

Reported-and-tested-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: <stable@kernel.org>
[CL: also serialize hw_params callback]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-23 08:15:43 +01:00
Dave Airlie
a2c06ee2fe Revert "ttm: Include the 'struct dev' when using the DMA API."
This reverts commit 5a893fc28f.

This causes a use after free in the ttm free alloc pages path,
when it tries to get the be after the be has been destroyed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 14:24:01 +10:00
John Ogness
ea68c00e26 OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL
In OMAP35X TRM Rev 2010-05 Figure 7-18 "DPLL With EMI Reduction
Feature", it is shown that the internal frequency is calculated by
CLK_IN/(N+1). However, the value passed to _dpll_test_fint() is
already "N+1" since Linux is using the values to divide by. In the
technical reference manual, "N" is referring to the divider's register
value (0-127).

During power management testing, it was observed that programming the
wrong jitter correction value can cause the system to become unstable
and eventually crash.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
[paul@pwsan.com: added second paragraph to commit message]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-22 20:00:47 -07:00
David S. Miller
dee9f4bceb net: Make flow cache paths use a const struct flowi.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:44:31 -08:00
David S. Miller
4ca2e68511 xfrm: Mark flowi arg to xfrm_resolve_and_create_bundle() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:38:51 -08:00
David S. Miller
3f0e18fb0e xfrm: Mark flowi arg to xfrm_dst_{alloc_copy,update_origin}() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:38:14 -08:00
David S. Miller
98313adaac xfrm: Mark flowi arg to xfrm_bundle_create() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:36:50 -08:00
David S. Miller
a6c2e61115 xfrm: Mark flowi arg to xfrm_tmpl_resolve{,_one}() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:35:39 -08:00
David S. Miller
73ff93cd02 xfrm: Mark flowi arg to xfrm_expand_policies() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:33:42 -08:00
Christoph Hellwig
20ad9ea9be xfs: enable delaylog by default
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22 20:33:25 -06:00
Christoph Hellwig
ec3ba85f40 xfs: more sensible inode refcounting for ialloc
Currently we return iodes from xfs_ialloc with just a single reference held.
But we need two references, as one is dropped during transaction commit and
the second needs to be transfered to the VFS.  Change xfs_ialloc to use
xfs_iget plus xfs_trans_ijoin_ref to grab two references to the inode,
and remove the now superflous IHOLD calls from all callers.  This also
greatly simplifies the error handling in xfs_create and also allow to remove
xfs_trans_iget as no other callers are left.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22 20:32:28 -06:00
David S. Miller
062cdb43b8 xfrm: Mark flowi arg to xfrm_policy_{lookup_by_type,match}() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:31:08 -08:00
Christoph Hellwig
1050c71e29 xfs: stop using xfs_trans_iget in the RT allocator
During mount we establish references to the RT inodes, which we keep for
the lifetime of the filesystem.  Instead of using xfs_trans_iget to grab
additional references when adding RT inodes to transactions use the
combination of xfs_ilock and xfs_trans_ijoin_ref, which archives the same
end result with less overhead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22 20:30:21 -06:00
David S. Miller
47209abd79 xfrm: Kill strict arg to xfrm_bundle_ok().
Always set to "0".

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:29:20 -08:00
David S. Miller
0730b9a150 net: Mark flowi arg to flow_cache_uli_match() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:27:22 -08:00
David S. Miller
b520e9f616 xfrm: Mark flowi arg to xfrm_state_find() const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22 18:24:19 -08:00