For pages that have the TTM_PAGE_FLAG_DMA32 flag set we
use the DMA API. We save the bus address in our array which we
use to program the GART (see "radeon/ttm/PCIe: Use dma_addr if TTM
has set it." and "nouveau/ttm/PCIe: Use dma_addr if TTM has set it.").
The reason behind using the DMA API is that under Xen we would
end up programming the GART with the bounce buffer (SWIOTLB)
DMA address instead of the physical DMA address of the TTM page.
The reason being that alloc_page with GFP_DMA32 does not allocate
pages under the the 4GB mark when running under Xen hypervisor.
Under baremetal this means we do the DMA API call earlier instead
of when we program the GART.
For details please refer to:
https://lkml.org/lkml/2011/1/7/251
[v2: Fixed indentation, revised desc, added Reviewed-by]
Reviewed-by: Thomas Hellstrom <thomas@shipmail.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
This is right now limited to only non-pool constructs.
[v2: Fixed indentation issues, add review-by tag]
Reviewed-by: Thomas Hellstrom <thomas@shipmail.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Audio jack in Nokia RX-51/N900 is driven by TPA6130 headphone amplifier.
This patch adds support for it and stereo output can be active when
"Jack Function" == "TV-OUT" || "Headphone".
As the TPA6130 can output very high volume levels the output is limited
with snd_soc_limit_volume. Limiting value is found from Maemo kernel sources.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
percpu, x86: Fix percpu_xchg_op()
x86: Remove left over system_64.h
x86-64: Don't use pointer to out-of-scope variable in dump_trace()
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
bnx2: Eliminate AER error messages on systems not supporting it
cnic: Fix big endian bug
xfrm6: Don't forget to propagate peer into ipsec route.
tg3: Use new VLAN code
bonding: update documentation - alternate configuration.
TCP: fix a bug that triggers large number of TCP RST by mistake
MAINTAINERS: remove Reinette Chatre as iwlwifi maintainer
rt2x00: add device id for windy31 usb device
mac80211: fix a crash in ieee80211_beacon_get_tim on change_interface
ipv6: Revert 'administrative down' address handling changes.
textsearch: doc - fix spelling in lib/textsearch.c.
USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()
pch_gbe: don't use flush_scheduled_work()
bnx2: Always set ETH_FLAG_TXVLAN
net: clear heap allocation for ethtool_get_regs()
ipv6: Always clone offlink routes.
dcbnl: make get_app handling symmetric for IEEE and CEE DCBx
tcp: fix bug in listening_get_next()
inetpeer: Use correct AVL tree base pointer in inet_getpeer().
GRO: fix merging a paged skb after non-paged skbs
...
Replaced md4 hashing function local to cifs module with kernel crypto APIs.
As a result, md4 hashing function and its supporting functions in
file md4.c are not needed anymore.
Cleaned up function declarations, removed forward function declarations,
and removed a header file that is being deleted from being included.
Verified that sec=ntlm/i, sec=ntlmv2/i, and sec=ntlmssp/i work correctly.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This patch adds __GFP_NORETRY and __GFP_NOMEMALLOC flags to the kmemleak
metadata allocations so that it has a smaller effect on the users of the
kernel slab allocator. Since kmemleak allocations can now fail more
often, this patch also reduces the verbosity by passing __GFP_NOWARN and
not dumping the stack trace when a kmemleak allocation fails.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Ted Ts'o <tytso@mit.edu>
We don't need to memset if we just use kzalloc() rather than kmalloc() in
kmemleak_test_init().
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
init_hw_perf_events() is called via early_initcall now.
x86_pmu_event_init is x86_pmu member function.
So we can change them to static.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
LKML-Reference: <4D3A16F9.109@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch fixes some issues with raw event validation on
Pentium 4 (Netburst) based processors.
As I was testing libpfm4 Netburst support, I ran into two
problems in the p4_validate_raw_event() function:
- the shared field must be checked ONLY when HT is on
- the binding to ESCR register was missing
The second item was causing raw events to not be encoded
correctly compared to generic PMU events.
With this patch, I can now pass Netburst events to libpfm4
examples and get meaningful results:
$ task -e global_power_events🏃u noploop 1
noploop for 1 seconds
3,206,304,898 global_power_events:running
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: perfmon2-devel@lists.sf.net
Cc: eranian@gmail.com
Cc: robert.richter@amd.com
Cc: acme@redhat.com
Cc: gorcunov@gmail.com
Cc: ming.m.lin@intel.com
LKML-Reference: <4d3efb2f.1252d80a.1a80.ffffc83f@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 927c7a9e92 ("perf: Fix race in callchains") introduced
a mismatch in the sizing of struct callchain_cpus_entries.
nr_cpu_ids must be used instead of num_possible_cpus(), or we
might get out of bound memory accesses on some machines.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Stephane Eranian <eranian@google.com>
CC: stable@kernel.org
LKML-Reference: <1295980851.3588.351.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
GPIO Ports A, B, and F on the ep93xx provide interrupt capability. It
is possible to debounce the input signal on these ports when interrupts
are enabled.
Support for this debounce capability was provided with an ep93xx internal
function. Now that gpiolib knows about gpio debounce, use the gpiolib
method and do not export the internal function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
With this patch, the cpuidle driver does not load and
does not issue the mwait operations. Instead the hypervisor
is doing them (b/c we call the safe_halt pvops call).
This fixes quite a lot of bootup issues wherein the user had
to force interrupts for the continuation of the bootup.
Details are discussed in:
http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00535.html
[v2: Wrote the commit description]
Reported-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Under Dell Inspiron 1525, and Intel SandyBridge SDP's the
BIOS e820 RAM is not page-aligned:
[ 0.000000] Xen: 0000000000100000 - 00000000df66d800 (usable)
We were not handling that and ended up setting up a pagetable
that included up to df66e000 with the disastrous effect that when
memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
tried to clear the page it would crash at the 2K mark.
Initially reported by Michael Young @
http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00108.html
The fix is to page-align the size and also take into consideration
the start of the E820 (in case that is not page-aligned either). This
fixes the bootup failure on those affected machines.
This patch is a rework of the Micheal A Young initial patch and
considers the case if the start is not page-aligned.
Reported-by: Michael A Young <m.a.young@durham.ac.uk>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Michael A Young <m.a.young@durham.ac.uk>
In case the mfn_list does not have enough entries to fill
a p2m page we do not want the entries from max_pfn up to
the boundary to be filled with unknown values. Hence
set them to INVALID_P2M_ENTRY.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Allows drivers to distinguish which subsequence is being notified when
they get called back.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Could just as well live in sysfs but sysfs doesn't have the simple
value export helpers debugfs does.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Allow hookup of cards registered directly with the core to the PM
operations by exporting the device power management operations to
modules, also exporting the default PM operations since it is
expected that most cards will end up using exactly the same setup.
Note that the callbacks require that the driver data for the card be
the snd_soc_card.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
In order to support cards instantiated without using soc-audio remove
the use of the platform device in the card probe() and remove() ops.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
The platform device for the card is tied closely to the soc-audio
implementation which we're currently trying to remove in favour of
allowing cards to have their own devices. Begin removing it by
replacing it with the card in the suspend and resume callbacks we
give to cards, also taking the opportunity to remove the legacy
suspend types which are currently hard coded anyway.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
In low-level board support code, there is sometimes a need to
copy a function body to another location at run-time.
A straightforward call to memcpy doesn't work in Thumb-2,
because bit 0 of external Thumb function symbols is set to 1,
indicating that the function is Thumb. Without corrective
measures, this will cause an off-by-one copy, and the copy
may be called using the wrong instruction set.
This patch adds an fncpy() macro to help with such copies.
Particular care is needed, because C doesn't guarantee any
defined behaviour when casting a function pointer to any other
type. This has been observed to lead to strange optimisation
side-effects when doing the arithmetic which is required in
order to copy/move function bodies correctly in Thumb-2.
Thanks to Russell King and Nicolas Pitre for their input
on this patch.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Tested-by: Jean Pihet <j-pihet@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the build on UP.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Turner <pjt@google.com>
LKML-Reference: <20110122044852.102126037@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra pointed out, that the only user of asmregparm (x86) is
compiling the kernel already with -mregparm=3. So the annotation of
the rwsem functions is redundant. Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <alpine.LFD.2.00.1101262130450.31804@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
All architecture specific rwsem headers carry the same function
prototypes. Just x86 adds asmregparm, which is an empty define on all
other architectures. S390 has a stale rwsem_downgrade_write()
prototype.
Remove the duplicates and add the prototypes to linux/rwsem.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <20110126195833.970840140@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Instead of having the same implementation in each architecture, move
it to linux/rwsem.h and remove the duplicates. It's unlikely that an
arch will ever implement something different, but we can deal with
that when it happens.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <20110126195833.876773757@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The rwsem initializers and related macros and functions are mostly the
same. Some of them lack the lockdep initializer, but having it in
place does not matter for architectures which do not support lockdep.
powerpc, sparc, x86: No functional change
sh, s390: Removes the duplicate init_rwsem (inline and #define)
alpha, ia64, xtensa: Use the lockdep capable init function in
lib/rwsem.c which is just uninlining the init
function for the LOCKDEP=n case
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <20110126195833.771812729@linutronix.de>
The difference between these declarations is the data type of the
count member and the lack of lockdep in some architectures/
long is equivivalent to signed long and the #ifdef guarded dep_map
member does not hurt anyone.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <20110126195833.679641914@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove the typedef which has no real reason to be there.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <20110126195833.580335506@linutronix.de>