Commit graph

254,703 commits

Author SHA1 Message Date
Tony Lindgren
05b5ca9b10 omap1: Fix booting for 15xx and 730 with omap1_defconfig
For omap15xx and 730 we need to use the MPU timer
as the 32K timer is not available. For omap16xx
we want to use the 32K timer because of PM. Fix this
by allowing to build in both timers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-19 10:38:43 -08:00
Shirish Pargaonkar
540b2e3777 cifs: Fix regression during share-level security mounts (Repost)
NTLM response length was changed to 16 bytes instead of 24 bytes
that are sent in Tree Connection Request during share-level security
share mounts.  Revert it back to 24 bytes.

Reported-and-Tested-by: Grzegorz Ozanski <grzegorz.ozanski@intel.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Suresh Jayaraman <sjayaraman@suse.de>
Cc: stable@kernel.org
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 18:11:18 +00:00
Patrick McHardy
f5c88f56b3 netfilter: nf_conntrack: fix lifetime display for disabled connections
When no tstamp extension exists, ct_delta_time() returns -1, which is
then assigned to an u64 and tested for negative values to decide
whether to display the lifetime. This obviously doesn't work, use
a s64 and merge the two minor functions into one.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-01-19 19:10:49 +01:00
Steve French
1cd3508d5e [CIFS] Update cifs version number
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:53:44 +00:00
Jeff Layton
053d503445 cifs: move mid result processing into common function
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:45 +00:00
Jeff Layton
ddc8cf8fc7 cifs: move locked sections out of DeleteMidQEntry and AllocMidQEntry
In later patches, we're going to need to have finer-grained control
over the addition and removal of these structs from the pending_mid_q
and we'll need to be able to call the destructor while holding the
spinlock. Move the locked sections out of both routines and into
the callers. Fix up current callers of DeleteMidQEntry to call a new
routine that dequeues the entry and then destroys it.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:42 +00:00
Jeff Layton
8097531a5c cifs: clean up accesses to midCount
It's an atomic_t and the code accesses the "counter" field in it directly
instead of using atomic_read(). It also is sometimes accessed under a
spinlock and sometimes not. Move it out of the spinlock since we don't need
belt-and-suspenders for something that's just informational.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:38 +00:00
Jeff Layton
c5797a945c cifs: make wait_for_free_request take a TCP_Server_Info pointer
The cifsSesInfo pointer is only used to get at the server.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by:  Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:30 +00:00
Jeff Layton
9d78315b03 cifs: no need to mark smb_ses_list as cifs_demultiplex_thread is exiting
The TCP_Server_Info is refcounted and every SMB session holds a
reference to it. Thus, smb_ses_list is always going to be empty when
cifsd is coming down. This is dead code.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:30 +00:00
Jeff Layton
941b853d77 cifs: don't fail writepages on -EAGAIN errors
If CIFSSMBWrite2 returns -EAGAIN, then the error should be considered
temporary. CIFS should retry the write instead of setting an error on
the mapping and returning.

For WB_SYNC_ALL, just retry the write immediately. In the WB_SYNC_NONE
case, call redirty_page_for_writeback on all of the pages that didn't
get written out and then move on.

Also, fix up the handling of a short write with a successful return
code. MS-CIFS says that 0 bytes_written means ENOSPC or EFBIG. It
doesn't mention what a short, but non-zero write means, so for now
treat it as we would an -EAGAIN return.

Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:29 +00:00
Pavel Shilovsky
12fed00de9 CIFS: Fix oplock break handling (try #2)
When we get oplock break notification we should set the appropriate
value of OplockLevel field in oplock break acknowledge according to
the oplock level held by the client in this time. As we only can have
level II oplock or no oplock in the case of oplock break, we should be
aware only about clientCanCacheRead field in cifsInodeInfo structure.

Also fix bug connected with wrong interpretation of OplockLevel field
during oplock break notification processing.

Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-19 17:52:29 +00:00
Jan Engelhardt
cc4fc02257 netfilter: xtables: connlimit revision 1
This adds destination address-based selection. The old "inverse"
member is overloaded (memory-wise) with a new "flags" variable,
similar to how J.Park did it with xt_string rev 1. Since revision 0
userspace only sets flag 0x1, no great changes are made to explicitly
test for different revisions.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2011-01-19 18:27:46 +01:00
Sage Weil
7e57b81c76 ceph: avoid immediate cap check after import
The NODELAY flag avoids the heuristics that delay cap (issued/wanted)
release.  There's no reason for that after we import a cap, and it kills
whatever benefit we get from those delays.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:26 -08:00
Sage Weil
088b3f5e9e ceph: fix flushing of caps vs cap import
If we are mid-flush and a cap is migrated to another node, we need to
resend the cap flush message to the new MDS, and do so with the original
flush_seq to avoid leaking across a sync boundary.  Previously we didn't
redo the flush (we only flushed newly dirty data), which would cause a
later sync to hang forever.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:25 -08:00
Sage Weil
24be0c4810 ceph: fix erroneous cap flush to non-auth mds
The int flushing is global and not clear on each iteration of the loop,
which can cause a second flush of caps to any MDSs with ids greater than
the auth.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:24 -08:00
Sage Weil
50aac4fec5 ceph: fix cap_wanted_delay_{min,max} mount option initialization
These were initialized to 0 instead of the default, fallout from the RBD
refactor in 3d14c5d2b6.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-19 09:23:22 -08:00
Johan Hedberg
765c2a964b Bluetooth: Fix race condition with conn->sec_level
The conn->sec_level value is supposed to represent the current level of
security that the connection has. However, by assigning to it before
requesting authentication it will have the wrong value during the
authentication procedure. To fix this a pending_sec_level variable is
added which is used to track the desired security level while making
sure that sec_level always represents the current level of security.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:43:11 -02:00
Johan Hedberg
d00ef24fc2 Bluetooth: Fix authentication request for L2CAP raw sockets
When there is an existing connection l2cap_check_security needs to be
called to ensure that the security level of the new socket is fulfilled.
Normally l2cap_do_start takes care of this, but that function doesn't
get called for SOCK_RAW type sockets. This patch adds the necessary
l2cap_check_security call to the appropriate branch in l2cap_do_connect.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:43 -02:00
Johan Hedberg
8556edd32f Bluetooth: Create a unified auth_type evaluation function
The logic for determining the needed auth_type for an L2CAP socket is
rather complicated and has so far been duplicated in
l2cap_check_security as well as l2cap_do_connect. Additionally the
l2cap_check_security code was completely missing the handling of
SOCK_RAW type sockets. This patch creates a unified function for the
evaluation and makes l2cap_do_connect and l2cap_check_security use that
function.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:43 -02:00
Johan Hedberg
65cf686ee1 Bluetooth: Fix MITM protection requirement preservation
If an existing connection has a MITM protection requirement (the first
bit of the auth_type) then that requirement should not be cleared by new
sockets that reuse the ACL but don't have that requirement.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:43 -02:00
Johan Hedberg
88644bb9fe Revert "Bluetooth: Update sec_level/auth_type for already existing connections"
This reverts commit 045309820a. That
commit is wrong for two reasons:

- The conn->sec_level shouldn't be updated without performing
authentication first (as it's supposed to represent the level of
security that the existing connection has)

- A higher auth_type value doesn't mean "more secure" like the commit
seems to assume. E.g. dedicated bonding with MITM protection is 0x03
whereas general bonding without MITM protection is 0x04. hci_conn_auth
already takes care of updating conn->auth_type so hci_connect doesn't
need to do it.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:42 -02:00
Lukáš Turek
683d949a7f Bluetooth: Never deallocate a session when some DLC points to it
Fix a bug introduced in commit 9cf5b0ea3a:
function rfcomm_recv_ua calls rfcomm_session_put without checking that
the session is not referenced by some DLC. If the session is freed, that
DLC would refer to deallocated memory, causing an oops later, as shown
in this bug report: https://bugzilla.kernel.org/show_bug.cgi?id=15994

Signed-off-by: Lukas Turek <8an@praha12.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:42 -02:00
Johan Hedberg
e2e0cacbd4 Bluetooth: Fix leaking blacklist when unregistering a hci device
The blacklist should be freed before the hci device gets unregistered.

Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:42 -02:00
David Sterba
4571928fc7 Bluetooth: l2cap: fix misuse of logical operation in place of bitop
CC: Marcel Holtmann <marcel@holtmann.org>
CC: "Gustavo F. Padovan" <padovan@profusion.mobi>
CC: João Paulo Rechi Vita <jprvita@profusion.mobi>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:42 -02:00
Alexander Holler
86e09287e4 Bluetooth: ath3k: reduce memory usage
There is no need to hold the firmware in memory.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-19 14:40:41 -02:00
Felix Fietkau
fbb327c594 mac80211: drop non-auth 3-addr data frames when running as a 4-addr station
When running as a 4-addr station against an AP that has the 4-addr VLAN
interface and the main 3-addr AP interface bridged together, sometimes
frames originating from the station were looping back from the 3-addr AP
interface, causing the bridge code to emit warnings about receiving frames
with its own source address.
I'm not sure why this is happening yet, but I think it's a good idea to
drop all frames (except 802.1x/EAP frames) that do not match the configured
addressing mode, including 4-address frames sent to a 3-address station.
User test reports indicate that the problem goes away with this patch.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:12 -05:00
Johannes Berg
5dd36bc933 mac80211: allow advertising correct maximum aggregate size
Currently, mac80211 always advertises that it may send
up to 64 subframes in an aggregate. This is fine, since
it's the max, but might as well be set to zero instead
since it doesn't have any information.

However, drivers might have that information, so allow
them to set a variable giving it, which will then be
used. The default of zero will be fine since to the
peer that means we don't know and it will just use its
own limit for the buffer size.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:12 -05:00
Johannes Berg
0b01f030d3 mac80211: track receiver's aggregation reorder buffer size
The aggregation code currently doesn't implement the
buffer size negotiation. It will always request a max
buffer size (which is fine, if a little pointless, as
the mac80211 code doesn't know and might just use 0
instead), but if the peer requests a smaller size it
isn't possible to honour this request.

In order to fix this, look at the buffer size in the
addBA response frame, keep track of it and pass it to
the driver in the ampdu_action callback when called
with the IEEE80211_AMPDU_TX_OPERATIONAL action. That
way the driver can limit the number of subframes in
aggregates appropriately.

Note that this doesn't fix any drivers apart from the
addition of the new argument -- they all need to be
updated separately to use this variable!

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:11 -05:00
Johannes Berg
ac1bd8464f mac80211: don't return beacons when mesh is disabled
When mesh is disabled, mac80211 was returning
beacons with an empty mesh ID. That isn't
desirable, even if drivers shouldn't be trying
to get beacons to start with.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:11 -05:00
Ben Greear
4801416c76 ath9k: Fix up hardware mode and beacons with multiple vifs.
When using a mixture of AP and Station interfaces,
the hardware mode was using the type of the
last VIF registered.  Instead, we should keep track
of the number of different types of vifs and set the
mode accordingly.

In addtion, use the vif type instead of hardware opmode
when dealing with beacons.

Attempt to move some of the common setup code into smaller
methods so we can re-use it when changing vif mode as
well as adding/deleting vifs.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:11 -05:00
Felix Fietkau
f0b8220c64 ath9k: fix excessive BAR sending when a frame exceeds its retry limit
Because the sendbar variable was not reset to zero, the stack would send
Block ACK requests for all subframes following the one that failed, which
could mess up the receiver side block ack window.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:11 -05:00
Felix Fietkau
21f28e6f00 ath9k: try more than one tid when scheduling a new aggregate
Sometimes the first TID in the first AC's list is not available for forming
a new aggregate (the BAW might not allow it), however other TIDs may have
data available for sending.
Prevent a slowdown of other TIDs by going through multiple entries until
we've either hit the last one or enough AMPDUs are pending in the hardware
queue.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:10 -05:00
Rajkumar Manoharan
a4d6e17d3e ath9k_hw: fix carrier leakage calibration for AR9271
AR9285 carrier leakage calibration related workaround on high
temperature is not applicable for AR9271.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:10 -05:00
Rajkumar Manoharan
4e3ae38738 ath9k_htc: keep calibrated noise floor value for oper channel
The ath9k_hw assumes that caldata is valid only for
oper channel. But with ath9k_htc case, the caldata is
passed for all channels on hw_reset though we are not doing
calibration on that channel. So the oper channel's nf history
got cleared to default due to mismatch in channel flags.
This patch also saves some space.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:10 -05:00
Rajkumar Manoharan
bdd196a3e0 ath9k: preserve caldata history buffer across scanning
caldata's channel info is never filled with operating channel
info which is causing the operating channel's noise floor
history buffer is reset to default nf during channel change.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:10 -05:00
Ben Greear
bfc31df33b mac80211: Show max retry-counts in kernel messages.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:09 -05:00
Wey-Yi Guy
0a65169b1f mac80211: mesh only parameter mppath maybe unused
mppath is mesh related parameter and maybe unused

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:09 -05:00
Felix Fietkau
115dad7a7f ath9k_hw: partially revert "fix dma descriptor rx error bit parsing"
The rx error bit parsing was changed to consider PHY errors and various
decryption errors separately. While correct according to the documentation,
this is causing spurious decryption error reports in some situations.

Fix this by restoring the original order of the checks in those places,
where the errors are meant to be mutually exclusive.

If a CRC error is reported, then MIC failure and decryption errors
are irrelevant, and a PHY error is unlikely.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:09 -05:00
Luciano Coelho
df6ba5d80d mac80211: add hw configuration for max ampdu buffer size
Some devices don't support the maximum AMDPU buffer size of 64, so we
need to add an option to configure this in the hardware configuration.
This value will be used in the ADDBA response instead of the value
suggested in the request, if the latter is greater than the max
supported.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:09 -05:00
Nick Ledovskikh
dcac908bab mac80211:mesh_mpp_table_grow call should depend on MESH_WORK_GROW_MPP_TABLE flag.
Replace MESH_WORK_GROW_MPATH_TABLE by MESH_WORK_GROW_MPP_TABLE in
mesh_mpp_table_grow call condition.

(Clearly the original was a typo... -- JWL)

Signed-off-by: Nickolay Ledovskikh <nledovskikh@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:08 -05:00
Wojciech Dubowik
fda9b7afa7 ath5k: Fix return codes for eeprom read functions.
Eeprom read functions are of bool type and not int.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:08 -05:00
Felix Fietkau
8b3f4616d4 ath9k: reduce the likelihood of baseband hang check false positives
Since baseband hangs are rare, but the hang check function has a high
false positive rate in some situations, we need to add more reliable
indicators.

In AP mode we can use blocked beacon transmissions as an indicator,
they should be rare enough.

In station mode, we can skip the hang check entirely, since a true
hang will trigger beacon loss detection, and mac80211 will rescan,
which leads to a hw reset that will bring the hardware back to life.

To make this more reliable, we need to skip fast channel changes
if the hardware appears to be stuck.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:08 -05:00
Felix Fietkau
2ed72229d6 ath9k: reinitialize block ack window data when starting aggregation
There might be some old stale data left, which could confuse tracking
of pending tx frames.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:08 -05:00
Felix Fietkau
49447f2f9d ath9k: fix initial sequence number after starting an ampdu session
txtid->seq_start may not always be up to date, when there is HT non-AMPDU
traffic just before starting an AMPDU session. Relying on txtid->seq_next
is better, since it is also used to generate the sequence numbers for
all QoS data frames.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:07 -05:00
Felix Fietkau
a9e99a0cea ath9k: fix bogus sequence number increases on aggregation tid flush
When a tid pointer is passed to ath_tx_send_normal(), it increases the
starting sequence number for the next AMPDU action frame, which should
only be done if the sequence number assignment is fresh. In this case
it is clearly not.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:07 -05:00
RA-Jay Hung
80d184e6cf rt2x00: Fix and fine-tune rf registers for RT3070/RT3071/RT3090
Basically fix and fine-tune RT3070/RT3071/RT3090 chip RF initial value
when call rt2800_init_rfcsr

Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:07 -05:00
RA-Jay Hung
7f6e144fb9 rt2x00: Fix radio off hang issue for PCIE interface
PCI/PCIE radio off behavior is different from SOC/USB.
They mainly use MCU command to disable DMA, TX/RX and enter power saving mode.

Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:07 -05:00
Joel A Fernandes
9d52501b42 mac80211: Rewrote code for checking if destinations are proxied.
Rewrote code for checking if the destination is proxied by a mesh portal, to facilitate better
understanding of the functionality.

Signed-off-by: Joel A Fernandes <agnel.joel@gmail.com>
Acked-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:07 -05:00
Sujith Manoharan
04cf53f465 ath9k_hw: Offload USB eeprom reading to target
For USB devices, reading the EEPROM data can be offloaded
to the target. Use multiple register reads to take advantage
of this feature to reduce initialization time.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:06 -05:00
Sujith Manoharan
09a525d338 ath9k_htc: Add multiple register read API
This would decrease latency in reading bulk registers.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19 11:36:06 -05:00