Commit graph

254,703 commits

Author SHA1 Message Date
Rob Herring
73930a85cf of_serial: explicitly include of_irq.h
On PPC, of_irq.h gets implicitly included, but on other platforms
it does not.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-29 17:53:47 -07:00
Sylwester Nawrocki
3bbef1b912 ARM: S5P: Add platform support for MIPI CSIS devices
There may be up to two MIPI CSI slave interfaces depending on the SoC version.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:49 +09:00
Sylwester Nawrocki
7db8cb2ad5 ARM: S5PV310: Add resource definitions for MIPI CSIS
Add IRQ and register base address definitions for MIPI CSI slave devices.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:49 +09:00
Sylwester Nawrocki
5905bbfa5b ARM: S5PV210: Add resource definitions for MIPI CSIS
Naming changed for consistency with s5pv310 where there are two instances
of the device.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:49 +09:00
Thomas Abraham
9b580cdb1c ARM: S5PV210: Add DM9000 support on SMDKV210
This patch adds DM9000 Ethernet Controller device support for SMDKV210.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:48 +09:00
Thomas Abraham
81f9becd6a ARM: S5PV210: Add SROM controller clock
This patch adds the SROM controller clock to the list of clocks to be enabled at
boot time. It is required to be enabled at boot time since the modules connected
over the SROM interface such as the Ethernet controller need an operational SROM.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:48 +09:00
Thomas Abraham
be297f0374 ARM: S5P: Move SROM controller IO mapping to plat-s5p for S5P SoCs
This patch modifies the following.

1. Moves the SROM controller mapping from S5PV210 specific code to
   S5P common code. The SROM controller mapping can be used for all
   S5P SoCs.

2. Define the SROM controller physical address for S5P64X0, S5P6442,
   S5PC100, S5PV210 and S5PV310.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:48 +09:00
Thomas Abraham
8233ab6aec ARM: S5P: Add SROM bank 4 and 5 register offsets
Some of the S5P platforms like S5PC100 and S5PV210 include SROM banks
4 and 5 in addition to SROM banks 0 to 3. This patch adds register
offsets for SROM bank 4 and 5.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:48 +09:00
Thomas Abraham
abc6c36022 ARM: S5P: Add SROM control register shift macros for other banks.
This patch adds shift macros for the SROM Bus width and control
register to represent the shift count for the 5th and 6th SROM
banks.  Some of the S5P SOCs have them.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:48 +09:00
Kukjin Kim
8cf460a5d7 ARM: S5P: Move the SROM register definitions to plat-s5p
The SROM register difinitions of S5PV310/S5PC210 (mach/regs-srom.h)
can be used to other S5P SoCs such as S5PV210/S5PC110. So moved into
plat/regs-srom.h of plat-s5p directory.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:48 +09:00
Abhilash Kesavan
9af7d94f29 ARM: S5P6440: Change the name for MMC Special Clock
Change the name of mmc spcial clock from mmc_bus to sclk_mmc to be
in line with the naming across the S5P SoCs

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
[kgene.kim@samsung.com: minor edit of title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:28 +09:00
Abhilash Kesavan
f85cbea94c ARM: S5P64X0: Change GPIOlib initialization to core_initcall
This patch changes the gpiolib initialization from arch_initcall
to core_initcall will allow us to make use of gpio functions in
smdk64x0_machine_init function.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:28 +09:00
Atul Dahiya
232d10061c ARM: S5P64X0: Add clock support for RTC
This patch adds RTC clock for S5P6450.

Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:28 +09:00
Kukjin Kim
5b1bab2e9e ARM: S5P64X0: Rename GPIOlib file to gpiolib.c
This patch renames S5P64X0 GPIOlib file according to other S5P SoCs.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:28 +09:00
Kukjin Kim
bb1d7002bb ARM: S5P64X0: Cleanup S5P64X0 GPIOlib adding 2bit chips
This patch changes S5P6440 and S5P6450 GPIOlib adding 2bit chips.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:28 +09:00
Kukjin Kim
4603089d7c ARM: SAMSUNG: Cleanup GPIOlib adding 2bit chips
This patch adds samsung_gpiolib_add_2bit_chips() for cleanup regarding
GPIOlib adding 2bit chips.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:28 +09:00
Kukjin Kim
f50266d313 ARM: S5P64X0: Add GPIOlib support for S5P6450
Already can support S5P6440 GPIOlib but S5P6450. This patch changes regarding
S5P6440 GPIO definitions so that can be used it from S5P6450 and adds S5P6450
GPIO chips.

Tested-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:27 +09:00
Thomas Abraham
8f49720d5a ARM: S5PV210: Add frame buffer display support for SMDKV210
Enable frame buffer display support for SMDKV210 board.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:13 +09:00
Kyungmin Park
a8928ce7e0 ARM: S5PV310: Universal SDHCI devices support
Universal (C210) board has 3 SDHCI devices.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor edit of title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:03 +09:00
Changhwan Youn
d6d8b48199 ARM: S5PV310: Add support Power Domain
This patch adds support Power Domain for S5PV310 and S5PC210.

Signed-off-by: Changhwan Youn <chaos.youn at samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:02 +09:00
Changhwan Youn
a50eb1c768 ARM: S5PV310: Set bit 22 in the PL310 (cache controller) AuxCtlr register
This patch is applied according to the commit 1a8e41cd67
(ARM: 6395/1: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr register).

Actually, S5PV310 has same cache controller(PL310).

Following is from Catalin Marinas' commit.

Clearing bit 22 in the PL310 Auxiliary Control register (shared
attribute override enable) has the side effect of transforming Normal
Shared Non-cacheable reads into Cacheable no-allocate reads.

Coherent DMA buffers in Linux always have a Cacheable alias via the
kernel linear mapping and the processor can speculatively load cache
lines into the PL310 controller. With bit 22 cleared, Non-cacheable
reads would unexpectedly hit such cache lines leading to buffer
corruption.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Cc: <stable@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:37:02 +09:00
Changhwan Youn
d930596a3c ARM: SAMSUNG: Add support for Power Domain control
This patch implements Power Domain control based on Runtime PM framework.
Each Power Domain is represented by a Power Domain device and the devices
belong to these Power Domains should be set as a child device of the Power
Domain devices. The corresponding drivers of the devices should implement
Runtime PM to control the Power Domains.

Signed-off-by: Changhwan Youn <chaos.youn at samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:36:52 +09:00
Mark Brown
df3d02962b ARM: SAMSUNG: Convert irq-vic-timer to irq_ functions
Conver the VIC timer interrupts to use the irq_ versions of the IRQ
operatiosn introduced in 2.6.37, storing the mask for the timer
interrupt in the chip_data of the irq_data in order to save having to
do a substraction and a shift on every operation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:36:52 +09:00
Mark Brown
27b31e5623 ARM: SAMSUNG: Convert irq-uart to use new irq_ functions
Convert to the new irq_ versions of the IRQ operations. As well as
the textual substituion of irq_data for the raw IRQ number we also
convert the register base lookup to in s3c_irq_uart_base() to pick
the irq_data up directly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:36:52 +09:00
Mark Brown
3c9169753b ARM: S3C64XX: Use chip_data to store the shift for EINTs
This makes all the functions that use the shift slightly smaller, one
instruction in most cases but more for ack() and maskack().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:36:52 +09:00
Mark Brown
c35cd6ec36 ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methods
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Conver S3C64xx irq-eint to use this with a
simple textual substitution.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:36:52 +09:00
Mark Brown
f5aeffb784 ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods
Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Begin converting Samsung platforms over to
these methods by converting s3c_irqext_wake() with a simple textual
substitution.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 09:36:52 +09:00
Stephen Neuendorffer
fe14042358 of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree
unflatten_device_tree has two dependencies on things that happen
during boot time.  Firstly, it references the initial device tree
directly. Secondly, it allocates memory using the early boot
allocator.  This patch factors out these dependencies and uses
the new __unflatten_device_tree function to implement a driver-visible
fdt_unflatten_tree function, which can be used to unflatten a
blob after boot time.

V2:
- remove extra __va() call
- make dt_alloc functions return void *.  This doesn't fix the general
  strangeness in this code that constantly casts back and forth between
  unsigned long and __be32 *

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-29 17:02:15 -07:00
Stephen Neuendorffer
57d00ecf90 of/flattree: Reorder unflatten_dt_node
Move unflatten_dt_node to be grouped with non-__init functions.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-29 17:00:26 -07:00
Stephen Neuendorffer
a40d6c4cf1 of/flattree: Refactor unflatten_dt_node
unflatten_dt_node is a helper function that does most of the work to
convert a device tree blob into tree of device nodes.  This code
now uses a passed-in blob instead of using the single boot-time blob,
allowing it to be called in more contexts.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-29 16:53:55 -07:00
Stephen Neuendorffer
9706a36e35 of/flattree: Add non-boottime device tree functions
In preparation for providing run-time handling of device trees, factor
out some of the basic functions so that they take an arbitrary blob,
rather than relying on the single boot-time tree.

V2:
- functions have of_fdt_* names
- removed find_flat_dt_string
- blob argument is first

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-29 16:53:45 -07:00
Yinghai Lu
1411e0ec31 x86-64, numa: Put pgtable to local node memory
Introduce init_memory_mapping_high(), and use it with 64bit.

It will go with every memory segment above 4g to create page table to the
memory range itself.

before this patch all page tables was on one node.

with this patch, one RED-PEN is killed

debug out for 8 sockets system after patch
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f750000 page 4k
[    0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff]
[    0.000000] RAMDISK: 7bc84000 - 7f745000
....
[    0.000000] Adding active range (0, 0x10, 0x95) 0 entries of 3200 used
[    0.000000] Adding active range (0, 0x100, 0x7f750) 1 entries of 3200 used
[    0.000000] Adding active range (0, 0x100000, 0x1080000) 2 entries of 3200 used
[    0.000000] Adding active range (1, 0x1080000, 0x2080000) 3 entries of 3200 used
[    0.000000] Adding active range (2, 0x2080000, 0x3080000) 4 entries of 3200 used
[    0.000000] Adding active range (3, 0x3080000, 0x4080000) 5 entries of 3200 used
[    0.000000] Adding active range (4, 0x4080000, 0x5080000) 6 entries of 3200 used
[    0.000000] Adding active range (5, 0x5080000, 0x6080000) 7 entries of 3200 used
[    0.000000] Adding active range (6, 0x6080000, 0x7080000) 8 entries of 3200 used
[    0.000000] Adding active range (7, 0x7080000, 0x8080000) 9 entries of 3200 used
[    0.000000] init_memory_mapping: [0x00000100000000-0x0000107fffffff]
[    0.000000]  0100000000 - 1080000000 page 2M
[    0.000000] kernel direct mapping tables up to 1080000000 @ [0x107ffbd000-0x107fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x107ffc2000-0x107fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00001080000000-0x0000207fffffff]
[    0.000000]  1080000000 - 2080000000 page 2M
[    0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x207ffc0000-0x207fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00002080000000-0x0000307fffffff]
[    0.000000]  2080000000 - 3080000000 page 2M
[    0.000000] kernel direct mapping tables up to 3080000000 @ [0x307ff3d000-0x307fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x307ffc0000-0x307fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00003080000000-0x0000407fffffff]
[    0.000000]  3080000000 - 4080000000 page 2M
[    0.000000] kernel direct mapping tables up to 4080000000 @ [0x407fefd000-0x407fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x407ffc0000-0x407fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00004080000000-0x0000507fffffff]
[    0.000000]  4080000000 - 5080000000 page 2M
[    0.000000] kernel direct mapping tables up to 5080000000 @ [0x507febd000-0x507fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x507ffc0000-0x507fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00005080000000-0x0000607fffffff]
[    0.000000]  5080000000 - 6080000000 page 2M
[    0.000000] kernel direct mapping tables up to 6080000000 @ [0x607fe7d000-0x607fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x607ffc0000-0x607fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00006080000000-0x0000707fffffff]
[    0.000000]  6080000000 - 7080000000 page 2M
[    0.000000] kernel direct mapping tables up to 7080000000 @ [0x707fe3d000-0x707fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x707ffc0000-0x707fffffff]          PGTABLE
[    0.000000] init_memory_mapping: [0x00007080000000-0x0000807fffffff]
[    0.000000]  7080000000 - 8080000000 page 2M
[    0.000000] kernel direct mapping tables up to 8080000000 @ [0x807fdfc000-0x807fffffff]
[    0.000000]     memblock_x86_reserve_range: [0x807ffbf000-0x807fffffff]          PGTABLE
[    0.000000] Initmem setup node 0 [0000000000000000-000000107fffffff]
[    0.000000]   NODE_DATA [0x0000107ffbd000-0x0000107ffc1fff]
[    0.000000] Initmem setup node 1 [0000001080000000-000000207fffffff]
[    0.000000]   NODE_DATA [0x0000207ffbb000-0x0000207ffbffff]
[    0.000000] Initmem setup node 2 [0000002080000000-000000307fffffff]
[    0.000000]   NODE_DATA [0x0000307ffbb000-0x0000307ffbffff]
[    0.000000] Initmem setup node 3 [0000003080000000-000000407fffffff]
[    0.000000]   NODE_DATA [0x0000407ffbb000-0x0000407ffbffff]
[    0.000000] Initmem setup node 4 [0000004080000000-000000507fffffff]
[    0.000000]   NODE_DATA [0x0000507ffbb000-0x0000507ffbffff]
[    0.000000] Initmem setup node 5 [0000005080000000-000000607fffffff]
[    0.000000]   NODE_DATA [0x0000607ffbb000-0x0000607ffbffff]
[    0.000000] Initmem setup node 6 [0000006080000000-000000707fffffff]
[    0.000000]   NODE_DATA [0x0000707ffbb000-0x0000707ffbffff]
[    0.000000] Initmem setup node 7 [0000007080000000-000000807fffffff]
[    0.000000]   NODE_DATA [0x0000807ffba000-0x0000807ffbefff]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933D1.9020609@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-29 15:48:08 -08:00
Yinghai Lu
dbef7b56d2 x86-64, numa: Allocate memnodemap under max_pfn_mapped
We need to access it right way, so make sure that it is mapped already.

Prepare to put page table on local node, and nodemap is used before that.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933C8.7060105@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-29 15:48:08 -08:00
Yinghai Lu
45635ab5e4 x86: Change get_max_mapped() to inline
Move it into head file. to prepare use it in other files.

[ hpa: added missing <linux/types.h> and changed type to phys_addr_t. ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933BA.8000508@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-29 15:47:55 -08:00
Jassi Brar
d8a2d39d9e ARM: S5PV310: Enable I2S device on SMDKC210
Enable I2S_0 device on the SMDKC210.
Also, add the dependency I2C_1 device.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:36:43 +09:00
Jassi Brar
6f5c11c5a5 ARM: S5PV310: Enable I2S device on SMDKV310
Enable I2S_0 device on the SMDKV310.
Also, add the dependency I2C_1 device.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:36:40 +09:00
Jassi Brar
906b9826b8 ARM: S5PV310: Add AC97 support for SMDK
Enable AC97 audio device on SMDKV310 and SMDKC210.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:33:48 +09:00
Jassi Brar
2d27043f7b ARM: S5PV310: Define I2S clocks
Define missing controller clocks for the I2S-0, 1 and 2 blocks.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: Added description]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:33:05 +09:00
Jassi Brar
aa227557dd ARM: S5PV310: Add AC97 clock
Define clock for the AC97 controller.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:32:49 +09:00
Jassi Brar
3055c6dad6 ARM: S5PV310: Add PDMA clocks
Define PDMA clocks for the controller 0 and 1.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:32:45 +09:00
Jassi Brar
f5cc435490 ARM: S5PV310: Enable I2C1 device
Enable the I2C1 device on SMDKV310 and SMDKC210.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:32:42 +09:00
Jassi Brar
d8710bc8de ARM: S5PV210: Enable I2S device to work on SMDKV210
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDKV210.

[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:32:18 +09:00
Jassi Brar
0031e9d91e ARM: S5PV210: Enable I2S device to work on SMDKC110
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDKC110.

[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:31:55 +09:00
Jassi Brar
fcf8897d03 ARM: S5P6450: Enable I2S device to work on SMDK6450
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDK6450.

[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:31:25 +09:00
Jassi Brar
149bb5bcc3 ARM: S5P6440: Enable I2S device to work on SMDK6440
Add missing virtual ASoC DMA device and WM8580 as I2C slave,
so that the I2S can work on SMDK6440.

[kgene.kim@samsung.com: removed virtual ASoC DMA device
to avoid build error and it will be added next time]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:30:27 +09:00
Rajeshwari Shinde
e0b9c88b12 ARM: S5P64X0: Segregate audio devices
Segregate I2S devices for S5P6440 and S5P6450.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:24:27 +09:00
Jassi Brar
cf57b1a7f2 ARM: S5P6450: Define base addresses for I2S
Define the base address of I2S-1 and 2 for S5P6450.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: Added description]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:24:23 +09:00
Jassi Brar
6cb26da820 ARM: S5P6450: Define clocks for I2S
Define missing controller clocks for the I2S-0,1 blocks.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:24:19 +09:00
Jassi Brar
c204fb1517 ARM: S5P6442: Enable I2C0 device on SMDK6442
This patch enables I2C0 device for WM8580 on SMDK6442.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: minor changed title and description]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:23:20 +09:00
Jassi Brar
85e0dbf94e ARM: S5P6442: Implement i2c-gpio config
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-12-30 08:23:15 +09:00