Commit graph

254,703 commits

Author SHA1 Message Date
Janusz Krzysztofik
da1f026b53 Keyboard: omap-keypad: use matrix_keypad.h
Most keypad drivers make use of the <linux/input/matrix_keypad.h>
defined macros, structures and inline functions.

Convert omap-keypad driver to use those as well, as suggested by a
compile time warning, hardcoded into the OMAP <palt/keypad.h>.

Created against linux-2.6.37-rc5.
Tested on Amstrad Delta.
Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to
board-h4.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22 11:11:47 -08:00
Arno Steffen
4e012e5f24 OMAP3: fix typo in OMAP3_IVA_MASK
OMAP3_IVA_MASK should use OMAP3_IVA_SHIFT instead of OMAP3_SGX_SHIFT

Signed-off-by: Arno Steffen <arno.steffen@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22 11:06:24 -08:00
Jarkko Nikula
6d38c4b4f1 omap: rx51: Remove tvout code that plays with gpio 40
Commit 60d24ee "Added video data to support tvout on rx51" added code that
tries to assign gpio 40 as OMAP DSS reset_gpio for tvout. This is wrong
since this gpio has nothing to do with OMAP DSS but it is used to control
one switch that selects is the audio jack connected to tvout or audio
circuitry.

This switch is already supported by the RX51 ASoC driver so there is no need
to control it elsewhere. Switch is contolled with ALSA control
'Jack Function' and tvout can be selected with following example:

	amixer -D hw:0 set 'Jack Function' 'TV-OUT'

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Srikar <ext-srikar.1.bhavanarayana@nokia.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22 11:06:24 -08:00
Jarkko Nikula
31bbb4f035 omap: rx51: Add vdda_dac supply for tvout
Commmit 60d24ee "Added video data to support tvout on rx51" broke the DSS
on RX51/N900 since it added DSS VENC support but a patch adding needed
supply is missing from tree and no framebuffers are initialized.

This patch is basically cleaned up version of original one:
http://marc.info/?l=linux-omap&m=129070041402418&w=2

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Srikar <ext-srikar.1.bhavanarayana@nokia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22 11:06:24 -08:00
Jarkko Nikula
b5b9945b2b omap: rx51: Cleanup vdds_sdi supply construction
It is much more cleaner to use REGULATOR_SUPPLY macro and a device name
instead of having a reference to rx51_display_device.dev with #if defined()
guards.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22 11:06:24 -08:00
John W. Linville
3cfeb0c33f rtl818x: move rtl8180 and rtl8187 to separate subdirectories
These drivers share one header file, but nothing else.  Worse, both
drivers use the rtl8225 part with different register settings.  The
results has been some ugly naming -- let's simplify that.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
2010-12-22 13:45:32 -05:00
Johannes Berg
b51aff057c mac80211: fix mesh forwarding
Under memory pressure, the mac80211 mesh code
may helpfully print a message that it failed
to clone a mesh frame and then will proceed
to crash trying to use it anyway. Fix that.

Cc: stable@kernel.org [2.6.27+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-22 13:36:35 -05:00
Oliver Neukum
68229689b6 HID: usbhid: base runtime PM on modern API
This patch doesn't alter functionality, but removes a dedicated kernel
thread.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Maulik Mankad <x0082077@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22 19:06:53 +01:00
Namhyung Kim
43b210139a hrtimer: fix a typo in comment
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22 19:01:47 +01:00
Jim Cromie
43d547f9ce init/Kconfig: fix typo
Signed-off-by:  Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22 18:58:36 +01:00
Jiri Kosina
4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Jon Hunter
f17f9726c2 OMAP4: clock data: Add missing fixed divisors
The following OMAP4 clocks have the following fixed divisors that
determine the frequency at which these clocks operate. These
dividers are defined by the PRCM specification and without these
dividers the rates of the below clocks are calculated incorrectly.
This may cause internal peripherals using these clocks to operate
at the wrong frequency.

- abe_24m_fclk (freq = divided-by-8)
- ddrphy_ck (freq = parent divided-by-2)
- dll_clk_div_ck (freq = parent divided-by-2)
- per_hs_clk_div_ck (freq = parent divided-by-2)
- usb_hs_clk_div_ck (freq = parent divided-by-3)
- func_12m_fclk (freq = parent divided-by-16)
- func_24m_clk (freq = parent divided-by-4)
- func_24mc_fclk (freq = parent divided-by-8)
- func_48mc_fclk (freq = divided-by-4)
- lp_clk_div_ck (freq = divided-by-16)
- per_abe_24m_fclk (freq = divided-by-4)

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Rajendra Nayak <rnayak@ti.com>
2010-12-22 10:12:46 -07:00
Vishwanath BS
9bf8391846 OMAP3: SDRC: Add comments on Errata i520 for Global SW reset
This patch adds comments on precaution to be taken if Global Warm reset is
used as the means to trigger system reset.

Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com>
[paul@pwsan.com: fixed typos, one mentioned by Sanjeev]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Sanjeev Premi <premi@ti.com>
2010-12-22 09:53:26 -07:00
Ingo Molnar
9fb67204d7 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2010-12-22 17:12:08 +01:00
Li Zefan
3a39c18d63 btrfs: Extract duplicate decompress code
Add a common function to copy decompressed data from working buffer
to bio pages.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-12-22 23:15:50 +08:00
Li Zefan
1a419d85a7 btrfs: Allow to specify compress method when defrag
Update defrag ioctl, so one can choose lzo or zlib when turning
on compression in defrag operation.

Changelog:

v1 -> v2
- Add incompability flag.
- Fix to check invalid compress type.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-12-22 23:15:48 +08:00
Li Zefan
a6fa6fae40 btrfs: Add lzo compression support
Lzo is a much faster compression algorithm than gzib, so would allow
more users to enable transparent compression, and some users can
choose from compression ratio and speed for different applications

Usage:

 # mount -t btrfs -o compress[=<zlib,lzo>] dev /mnt
or
 # mount -t btrfs -o compress-force[=<zlib,lzo>] dev /mnt

"-o compress" without argument is still allowed for compatability.

Compatibility:

If we mount a filesystem with lzo compression, it will not be able be
mounted in old kernels. One reason is, otherwise btrfs will directly
dump compressed data, which sits in inline extent, to user.

Performance:

The test copied a linux source tarball (~400M) from an ext4 partition
to the btrfs partition, and then extracted it.

(time in second)
           lzo        zlib        nocompress
copy:      10.6       21.7        14.9
extract:   70.1       94.4        66.6

(data size in MB)
           lzo        zlib        nocompress
copy:      185.87     108.69      394.49
extract:   193.80     132.36      381.21

Changelog:

v1 -> v2:
- Select LZO_COMPRESS and LZO_DECOMPRESS in btrfs Kconfig.
- Add incompability flag.
- Fix error handling in compress code.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-12-22 23:15:47 +08:00
Li Zefan
261507a02c btrfs: Allow to add new compression algorithm
Make the code aware of compression type, instead of always assuming
zlib compression.

Also make the zlib workspace function as common code for all
compression types.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-12-22 23:15:45 +08:00
Li Zefan
4b72029dc3 btrfs: Fix error handling in zlib
Return failure if alloc_page() fails to allocate memory,
and the upper code will just give up compression.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-12-22 23:15:43 +08:00
Li Zefan
8844355df7 btrfs: Fix bugs in zlib workspace
- Fix a race that can result in alloc_workspace > cpus.
- Fix to check num_workspace after wakeup.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-12-22 23:15:41 +08:00
Dimitris Papastamos
6a504a7511 ASoC: Add initial WM8995 driver
The WM8995 is a digital audio hub CODEC designed for smartphones.
The current driver supports most of the basic functionality of the
WM8995.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-22 13:37:12 +00:00
Tejun Heo
bcbea798f8 percpu: print out alloc information with KERN_DEBUG instead of KERN_INFO
Now that percpu allocator is mostly stable, there is no reason to
print alloc information with KERN_INFO and clutter the boot messages.
Switch it to KERN_DEBUG.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Travis <travis@sgi.com>
2010-12-22 14:19:14 +01:00
Takashi Iwai
9d01df063e ASoC: don't pass the string as the format arguemtn for dev_info()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-22 14:08:40 +01:00
Jack Steiner
d8850ba425 x86, UV: Fix the effect of extra bits in the hub nodeid register
UV systems can be partitioned into multiple independent SSIs.
Large partitioned systems may have extra bits in the node_id
register. These bits are used when the total memory on all SSIs
exceeds 16TB.  These extra bits need to be ignored when
calculating x2apic_extra_bits.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20101130195926.972776133@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 12:31:15 +01:00
Jack Steiner
e681041388 x86, UV: Add common uv_early_read_mmr() function for reading MMRs
Early in boot, reading MMRs from the UV hub controller require
calls to early_ioremap()/early_iounmap().  Rather than
duplicating code, add a common function to do the
map/read/unmap.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20101130195926.834804371@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 12:31:15 +01:00
Seungwhan Youn
f49be89bb4 ASoC: SAMSUNG: Debug wrong parameter
snd_soc_jack_new()'s first parameter was changed from snd_soc_card to
snd_soc_codec after Multi-Component support patches. So, this patch
fixes parameter that we missed.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-12-22 11:09:15 +00:00
Mark Brown
1c9e9795b5 ASoC: Add jack IRQ trace to 88pm860x driver
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 11:09:05 +00:00
Mark Brown
2bbb5d6679 ASoC: Trace Wolfson jack detection IRQs
Add jack detection interrupt trace to Wolfson CODEC drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 11:08:55 +00:00
Mark Brown
6d3c26bcb7 ASoC: Use delayed work to debounce WM8350 jack IRQs
This avoids blocking the IRQ thread and allows further bounces to extend
the debounce time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-22 11:08:45 +00:00
Russell King
36bb94ba36 ARM: pgtable: provide RDONLY page table bit rather than WRITE bit
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:35 +00:00
Russell King
9522d7e4cb ARM: pgtable: invert L_PTE_EXEC to L_PTE_XN
The hardware page tables use an XN bit 'execute never'.  Historically,
we've had a Linux 'execute allow' bit, in the positive sense.  Get rid
of this artifact as future hardware will continue to have the XN sense.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:35 +00:00
Russell King
e926f4495e ARM: pgtable: remove FIRST_USER_PGD_NR
FIRST_USER_PGD_NR is now unnecessary, as this has been replaced by
FIRST_USER_ADDRESS except in the architecture code.  Fix up the last
usage of FIRST_USER_PGD_NR, and remove the definition.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:34 +00:00
Russell King
af3813d6a5 ARM: pgtable: use conventional page table code for identity mappings
Remove some knowledge of our 2-level page table layout from the
identity mapping code - we assume that a step size of PGDIR_SIZE will
allow us to step over all entries.  While this is true today, it won't
be true in the near future.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:34 +00:00
Russell King
614dd0585f ARM: pgtable: collect up identity mapping functions
We have two places where we create identity mappings - one when we bring
secondary CPUs online, and one where we setup some mappings for soft-
reboot.  Combine these two into a single implementation.  Also collect
the identity mapping deletion function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:33 +00:00
Russell King
26bbf0b57a ARM: pgtable: remove L2 cache flushes for SMP page table bring-up
The MMU is always configured to read page tables from the L2 cache
so there's little point flushing them out of the L2 cache back to
RAM.  Remove these flushes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:33 +00:00
Russell King
d30e45eeab ARM: pgtable: switch order of Linux vs hardware page tables
This switches the ordering of the Linux vs hardware page tables in
each page, thereby eliminating some of the arithmetic in the page
table walks.  As we now place the Linux page table at the beginning
of the page, we can deal with the offset in the pgt by simply masking
it away, along with the other control bits.

This also makes the arithmetic all be positive, rather than a mixture.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22 11:05:32 +00:00
Mark Brown
b93cef5561 mfd: Support additional parent IDs for wm831x
Some newer device revisions add a second parent ID. Support this in
the device validity checks done at startup.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22 12:05:22 +01:00
Mattias Wallin
88aec4f7b6 mfd: Fix ab8500-core interrupt ffs bit bug
We want to find the first set bit on value, not status.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22 12:05:22 +01:00
Mark Brown
bd7c72ed18 mfd: Supply IRQ base for WM832x devices
Without this the IRQ base will not be correctly configured for the
subdevices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22 12:05:22 +01:00
Florian Fainelli
3b3c1f24e9 watchdog: Fix null pointer dereference while accessing rdc321x platform_data
rdc321x-wdt currently fetches its driver specific data by using the
platform_device->platform_data pointer, this is wrong because the mfd
device which registers our platform_device has been added using
mfd_add_device() which sets the platform_device->driver_data pointer
instead.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
CC: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22 12:05:21 +01:00
Florian Fainelli
fa6469cb5b gpio: Fix null pointer dereference while accessing rdc321x platform_data
rdc321x-gpio currently fetches its driver specific data by using the
platform_device->platform_data pointer, this is wrong because the mfd
device which registers our platform_device has been added using
mfd_add_device() which sets the platform_device->driver_data pointer
instead.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
CC: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22 12:05:20 +01:00
Ingo Molnar
8c1df4002a Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core 2010-12-22 11:54:50 +01:00
Ingo Molnar
6c529a266b Merge commit 'v2.6.37-rc7' into perf/core
Merge reason: Pick up the latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-22 11:53:23 +01:00
Tao Ma
7d8f98769e ocfs2: Fix system inodes cache overflow.
When we store system inodes cache in ocfs2_super,
we use a array for global system inodes. But unfortunately,
the range is calculated wrongly which makes it overflow and
pollute ocfs2_super->local_system_inodes.
This patch fix it by setting the range properly.

The corresponding bug is ossbug1303.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1303

Cc: stable@kernel.org
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-12-22 02:35:36 -08:00
Ingo Molnar
2ce494a3da Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent 2010-12-22 11:31:03 +01:00
Henrik Rydberg
4f56ce929c Input: synaptics - ignore bogus mt packet
In multitouch mode, at least one device (fw: 7.4 id: 0x1c0b1) sometimes
sends a final main packet with x == 1. Since the normal values are above
1472, this is clearly bogus. At the same time, a two-finger touch is
signaled, even though only one finger was on the pad to begin with. This
patch ignores the packet altogether, removing the problem.

Acked-by: Chris Bagwell <chris@cnpbagwell.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-12-22 11:15:28 +01:00
Yong Zhang
4f32e9b1f8 kthread_work: make lockdep happy
spinlock in kthread_worker and wait_queue_head in kthread_work both
should be lockdep sensible, so change the interface to make it
suiltable for CONFIG_LOCKDEP.

tj: comment update

Reported-by: Nicolas <nicolas.mailhot@laposte.net>
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Tested-by: Andy Walls <awalls@md.metrocast.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-22 10:27:53 +01:00
Jens Axboe
047b7bdab9 Merge branch 'for-2.6.38/event-handling' into for-next 2010-12-22 09:49:28 +01:00
Jens Axboe
fcc57045d5 Revert "sd: implement sd_check_events()"
This reverts commit c8d2e93735.

We run into merging problems with the SCSI tree, revert this one
so it can be handled by a postmerge tree there.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-22 09:48:49 +01:00
Linus Walleij
11c8ea81cc ux500: rename modem IRQ and MBOX files
Suffix the U5500 modem IRQ and MBOX files with *-db5500* so that
we clearly know the SoC they belong to, in line with the rest of
the files in mach-ux500.

Cc: Stefan Nilsson <stefan.xk.nilsson@stericsson.com>
Cc: Martin Persson <martin.persson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-22 09:26:49 +01:00