Commit graph

254,703 commits

Author SHA1 Message Date
Jarod Wilson
2ee95db222 [media] mceusb: fix keybouce issue after parser simplification
Something I failed to notice while testing the mceusb RLE buffer
decoding simplification patches was that we were getting an extra event
from the previously pressed key.

As was pointed out to me on irc by Maxim, this is actually due to using
ir_raw_event_store_with_filter without having set up a timeout value.
The hardware has a timeout value we're now reading and storing, which
properly enables the transition to idle in the raw event storage
process, and makes IR decode behave correctly w/o keybounce.

Also remove no-longer-used ir_raw_event struct from mceusb_dev struct
and add as-yet-unused enable flags for carrier reports and learning
mode, which I'll hopefully start wiring up sooner than later. While
looking into that, found evidence that 0x9f 0x15 responses are only
non-zero when the short-range learning sensor is used, so correct the
debug spew message, and then suppress it when using the standard
long-range sensor.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:10 -02:00
Jarod Wilson
2d6e588c48 [media] IR: add tv power scancode to rc6 mce keymap
And clean up some stray spaces.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:09 -02:00
Jarod Wilson
29b4494b1f [media] mceusb: buffer parsing fixups for 1st-gen device
If we pass in an offset, we shouldn't skip 2 bytes. And the first-gen
hardware generates a constant stream of interrupts, always with two
header bytes, and if there's been no IR, with nothing else. Bail from
ir processing without calling ir_handle_raw_event when we get such a
buffer delivered to us.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:08 -02:00
Jarod Wilson
1cd50f2561 [media] mceusb: fix up reporting of trailing space
We were storing a bunch of spaces at the end of each signal, rather than
a single long space. The in-kernel decoders were actually okay with
this, but lirc isn't. As suggested by David Härdeman, switch to storing
samples using ir_raw_event_store_with_filter, which auto-merges the
consecutive space samples for us. This also allows us to bypass having
to store rawir samples in our device struct, further simplifying the
buffer parsing state machine. Both in-kernel decoders and lirc are happy
again with this change.

Also included in this patch is proper parsing of 0x9f 0x01 commands, the
removal of some magic number usage and some printk spew fixups.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:07 -02:00
Jarod Wilson
b7582815b3 [media] nuvoton-cir: improve buffer parsing responsiveness
Rather than waiting for trigger bits, the formula for which was slightly
messy, and apparently, not actually 100% complete for some remotes, just
call ir_raw_event_handle whenever we finish parsing a chunk of data from
the rx fifo, similar to mceusb, as well as whenever we see an 'end of
signal data' 0x80 packet.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:06 -02:00
Jarod Wilson
6f6c625d32 [media] mceusb: add support for Conexant Hybrid TV RDU253S
Another multi-function Conexant device. Interface 0 is IR, though on
this model, TX isn't wired up at all, so I've mixed in support for
models without TX (and verified that lircd says TX isn't supported when
trying to send w/this device).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:05 -02:00
Sylwester Nawrocki
798174ab62 [media] s5p-fimc: Fix output DMA handling in S5PV310 IP revisions
FIMC IP in S5Pv310 series has extended DMA status registers
and some bit fields are marked as reserved comparing to S5PC100/110.
Use correct registers for getting DMA write pointer in each SoC variant
supported by the driver.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:03 -02:00
Sylwester Nawrocki
a8365fc205 [media] s5p-fimc: Use correct fourcc code for 32-bit RGB format
Replace V4L2_PIX_FMT_RGB24 code with V4L2_PIX_FMT_RGB32
since the hardware uses 24-bits for actual pixel data but pixels
are 4-byte aligned in memory.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:02 -02:00
Sylwester Nawrocki
69e05e837d [media] s5p-fimc: Convert m2m driver to unlocked_ioctl
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:01 -02:00
Sylwester Nawrocki
aee7126c4e [media] s5p-fimc: Explicitly add required header file
Reported by: Dan Carpenter <error27@gmail.com>

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:11:00 -02:00
Sylwester Nawrocki
e004e02f3a [media] s5p-fimc: Fix vidioc_g_crop/cropcap on camera sensor
Create separate vidioc_g_crop/vidioc_s_crop handlers for capture
video node and so image cropping parameters are properly queried
at FIMC input (image sensor) and not at FIMC output.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:10:59 -02:00
Sylwester Nawrocki
09b693f0bd [media] s5p-fimc: BKL lock removal - compilation fix
Adapt to recent videobuf_queue_dma_contig_init signature change.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:10:58 -02:00
Guennadi Liakhovetski
cd05e79f72 [media] soc-camera: fix static build of the sh_mobile_csi2.c driver
The test for driver->owner != NULL in sh_mobile_ceu_camera.c is unneeded and it
breaks the static build of sh_mobile_csi2.c. Remove it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:10:57 -02:00
Baruch Siach
42cc37fe20 [media] mx2_camera: fix pixel clock polarity configuration
When SOCAM_PCLK_SAMPLE_FALLING, just leave CSICR1_REDGE unset, otherwise we get
the inverted behaviour.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20 14:10:56 -02:00
Alexey Charkov
623eb15647 fbdev: Modify vsync timing calculation in wm8505fb
This removes the '+1' in vsync timing calculation for wm8505fb to
directly use values provided from the board setup code.

Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 01:05:48 +09:00
Alexey Charkov
a7f53284e9 fbdev: Minor cleanup in WM8505-related code
This replaces the last remaining driver name reference with the
macro for uniformity in wm8505fb.

In addition, the error return path in wmt_ge_rops.c is made more
uniform by getting rid of goto's in remaining places.

Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 01:05:43 +09:00
Andres Salomon
521bc83b0f s1d13xxxfb: drop unused code
Silence warnings such as -

drivers/video/s1d13xxxfb.c:421: warning: ‘bltbit_wait_bitset’ defined but not used

Just drop the unused code.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 01:05:43 +09:00
Jingoo Han
4959212c18 s3c-fb: add support for runtime pm
This patch adds support for runtime pm using the functions.
 - pm_runtime_get_sync()
 - pm_runtime_put_sync()

pm_runtime_get_sync() and pm_runtime_put_sync() are called when
open or release function of framebufer driver is called to inform
the system if hardware is idle or not.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 01:05:43 +09:00
Asbjoern Sloth Toennesen
55f88eccf9 kbuild, deb-pkg: support overriding userland architecture
Usefull if building for sparc64 userland, because the
sparc and sparc64 userlands use the same 64-bit kernel,
making it impossible to always select the correct userland
architecture for the resulting debian package.

Might also be usefull, if you want a i386 userland with a amd64 kernel.

Example usage:
	make KBUILD_DEBARCH=i386 deb-pkg

LKML-reference: <alpine.DEB.2.02.1011051437500.13287@aurora.sdinet.de>
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-20 16:52:31 +01:00
Paul Mundt
8bcee1832d Merge branch 'rmobile/urgent' into rmobile-latest
Conflicts:
	arch/arm/mach-shmobile/include/mach/entry-macro.S

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 00:40:51 +09:00
Magnus Damm
5ce2a2ddb5 ARM: mach-shmobile: Bump up NR_IRQS to 1024
Increase NR_IRQS from 512 to 1024 on SH-Mobile ARM.

Needed to support vectors in the sh73a0 INTCS block.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 00:27:55 +09:00
Magnus Damm
6155f77d09 ARM: mach-shmobile: Clean up headsmp.S
Use PAGE_OFFSET and PHYS_OFFSET for secondary_startup
entry point as recommended by Russell King.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 00:27:41 +09:00
Yusuke Goda
56e78dafc4 ARM: mach-shmobile: mackerel: Add GPS support
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 00:25:31 +09:00
Marek Vasut
59bdd13356 ARM: pxa: Add Balloon3 NAND ready check
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:14:09 +08:00
Marek Vasut
1b9169d8a0 ARM: pxa: Update Balloon3 for new FPGA firmware
The new FPGA firmware in Balloon3 uses different methods to control it's bus
control lines. In the new version, there are separate registers to set/clear
bus control lines. This patch updates affected places.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:14:02 +08:00
Marek Vasut
e60f137b71 ARM: pxa: Fix number of IRQs on Balloon3
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20 23:13:44 +08:00
Russell King
03b505eae6 ARM: SMP: split out software TLB maintainence broadcasting
smp.c is becoming too large, so split out the TLB maintainence
broadcasting into a separate smp_tlb.c file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:17 +00:00
Russell King
10034aabca ARM: localtimer: clean up local timer on hot unplug
When a CPU is hot unplugged, the generic tick code cleans up the
clock event device, but fails to call down to the device's set_mode
function to actually shut the device down.

To work around this, we've historically had a local_timer_stop()
callback out of the hotplug code.  However, this adds needless
complexity when we have the clock event device itself available.

Explicitly call the clock event device's set_mode function with
CLOCK_EVT_MODE_UNUSED, so that the hardware can be cleanly shutdown
without any special external callbacks.  When/if the generic code
is fixed, percpu_timer_stop() can be killed off.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:16 +00:00
Russell King
e3d9c625f5 ARM: CPU hotplug: fix hard-coded control register constants
Use the definition we've provided in asm/system.h rather than
numeric constants.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:16 +00:00
Russell King
e9882777d9 ARM: CPU hotplug: add Versatile Express hotplug CPU support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:15 +00:00
Russell King
d4450261e5 ARM: CPU hotplug: fix reporting of spurious wakeups
The original scheme for reporting spurious wakeups was broken - it
tried to use printk() from a context which wasn't coherent with the
other CPUs, which risks corrupting the printk() data.

Fix this by noting the number spurious wakeups, and only report them
when we are properly woken - when we will be coherent with the rest
of the system.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:14 +00:00
Russell King
58613cd1d4 ARM: smp: improve CPU bringup failure diagnostics
We used to print a bland error message which gave no clue as to the
failure when we failed to bring up a secondary CPU.  Resolve this by
separating the two failure cases.

If boot_secondary() fails, we print a message indicating the returned
error code from boot_secondary():
	"CPU%u: failed to boot: %d\n", cpu, ret.

However, if boot_secondary() succeeded, but the CPU did not appear to
mark itself online within the timeout, indicate that it failed to come
online:
	"CPU%u: failed to come online\n", cpu

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:14 +00:00
Russell King
90b44199e8 ARM: VFP: re-initialize VFP coprocessor access enables on CPU hotplug
We can not guarantee that VFP will be enabled when CPU hotplug brings
a CPU back online from a reset state.  Add a hotplug CPU notifier to
ensure that the VFP coprocessor access is enabled whenever a CPU comes
back online.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:13 +00:00
Russell King
3705ff6da5 ARM: Fix subtle race in CPU pen_release hotplug code
There is a subtle race in the CPU hotplug code, where a CPU which has
been offlined can online itself before being requested, which results
in things going astray on the next online/offline cycle.

What happens in the normal online/offline/online cycle is:

	CPU0			CPU3
	requests boot of CPU3
	pen_release = 3
	flush cache line
				checks pen_release, reads 3
				starts boot
				pen_release = -1
	... requests CPU3 offline ...
				... dies ...
				checks pen_release, reads -1
	requests boot of CPU3
	pen_release = 3
	flush cache line
				checks pen_release, reads 3
				starts boot
				pen_release = -1

However, as the write of -1 of pen_release is not fully flushed back to
memory, and the checking of pen_release is done with caches disabled,
this allows CPU3 the opportunity to read the old value of pen_release:

	CPU0			CPU3
	requests boot of CPU3
	pen_release = 3
	flush cache line
				checks pen_release, reads 3
				starts boot
				pen_release = -1
	... requests CPU3 offline ...
				... dies ...
				checks pen_release, reads 3
				starts boot
				pen_release = -1
	requests boot of CPU3
	pen_release = 3
	flush cache line

Fix this by grouping the write of pen_release along with its cache line
flushing code to ensure that any update to pen_release is always pushed
out to physical memory.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:13 +00:00
Dave Martin
ed3768a8d9 ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels.
* __fixup_smp_on_up has been modified with support for the
    THUMB2_KERNEL case.  For THUMB2_KERNEL only, fixups are split
    into halfwords in case of misalignment, since we can't rely on
    unaligned accesses working before turning the MMU on.

    No attempt is made to optimise the aligned case, since the
    number of fixups is typically small, and it seems best to keep
    the code as simple as possible.

  * Add a rotate in the fixup_smp code in order to support
    CPU_BIG_ENDIAN, as suggested by Nicolas Pitre.

  * Add an assembly-time sanity-check to ALT_UP() to ensure that
    the content really is the right size (4 bytes).

    (No check is done for ALT_SMP().  Possibly, this could be fixed
    by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus
    ALT_SMP...SMP_UP_B) into two macros.  In the first case,
    ALT_SMP needs to expand to >= 4 bytes, not == 4.)

  * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due
    to macro limitations) has not been modified: the affected
    instruction (mov) has no 16-bit encoding, so the correct
    instruction size is satisfied in this case.

  * A "mode" parameter has been added to smp_dmb:

    smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser)
    smp_dmb     @ uses W() to ensure 4-byte instructions for ALT_SMP()

    This avoids assembly failures due to use of W() inside smp_dmb,
    when assembling pure-ARM code in the vectors page.

    There might be a better way to achieve this.

  * Kconfig: make SMP_ON_UP depend on
    (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now
    supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2
    currently assumes little-endian order.)

Tested using a single generic realview kernel on:
	ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y})
	ARM RealView PBX-A9 (SMP)

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:12 +00:00
Russell King
86e62b9336 ARM: SMP: remove smp_mpidr.h
With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we
now do not use hard_smp_processor_id(), we no longer need to read the
hardware processor ID.  Remove the include providing this function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:11 +00:00
Russell King
f36d340122 ARM: CPU hotplug: ensure correct ordering of unplug
Don't call idle_task_exit() with interrupts disabled, and ensure
that we have a memory barrier after interrupts are disabled but
before signalling that this CPU has shut down.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:11 +00:00
Russell King
bbc81fd432 ARM: CPU hotplug: remove bug checks in platform_cpu_die()
platform_cpu_die() is entered from the CPU's own idle thread, which
can not be migrated to other CPUs.  Moreover, the 'cpu' argument
comes from the thread info, which will always be the 'current'
CPU.  So remove this useless bug check.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:10 +00:00
Russell King
3c030beabf ARM: CPU hotplug: move cpu_killed completion to core code
We always need to wait for the dying CPU to reach a safe state before
taking it down, irrespective of the requirements of the platform.
Move the completion code into the ARM SMP hotplug code rather than
having each platform re-implement this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:10 +00:00
Russell King
2c0136dba4 ARM: SMP: consolidate trace_hardirqs_off() into common SMP code
All platforms call trace_hardirqs_off() in their secondary startup code,
so move this into the core SMP code - it doesn't need to be in the
per-platform code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:09 +00:00
Russell King
05c74a6cbc ARM: SMP: consolidate the common parts of smp_prepare_cpus()
There is a certain amount of smp_prepare_cpus() which doesn't belong
in the platform support code - that is, code which is invariant to the
SMP implementation.  Move this code into arch/arm/kernel/smp.c, and
add a platform_ prefix to the original function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:09:08 +00:00
Russell King
aec66ba1f7 ARM: SMP: get rid of references to poke_milo and Milo
Milo is an old boot loader, which is no longer relevant for these
platforms.  References to it are misleading.  Move the code out
of poke_milo(), and remove references to milo in comments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:28 +00:00
Russell King
fd778f0ad7 ARM: SMP: get rid of get_core_count()
We don't need this small function as well as scu_get_core_count()

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:27 +00:00
Russell King
8975b6c0fd ARM: SMP: Clean up ncores sanity checks
scu_get_core_count() never returns zero cores, so we don't need to
check and correct if ncores is zero.

Tegra was missing the check against NR_CPUS, leading to a potential
bitfield overflow if this becomes the case.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:27 +00:00
Russell King
bbc3d14e9a ARM: SMP: move CPU number sanity checks to smp_init_cpus()
Ensure that the number of CPUs is sanity checked before setting
the number of possible CPUs.  This avoids any chance of overflowing
the cpu_possible bitmap.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:26 +00:00
Russell King
28e18293cf ARM: SMP: ensure smp_send_stop() waits for CPUs to stop
Wait for CPUs to indicate that they've stopped, after sending the
stop IPI, rather than blindly continuing on and hoping that they've
stopped in time.  Print a warning if we fail to stop the other CPUs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:26 +00:00
Russell King
0eb0511d17 ARM: SMP: use more sane register allocation for __fixup_smp_on_up
Use r0,r3-r6 rather than r0,r3,r4,r6,r7, which makes it easier to
understand which registers can be modified.  Also document which
registers hold values which must be preserved.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:02 +00:00
Russell King
b54992fe1b ARM: SMP: collect IPI and local timer IRQs for /proc/stat
The IPI and local timer interrupts weren't being properly accounted
for in /proc/stat.  Collect them from the irq_stat structure, and
return their sum.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:01 +00:00
Russell King
4a88abd7b4 ARM: SMP: provide individual IPI interrupt statistics
This separates out the individual IPI interrupt counts from the
total IPI count, which allows better visibility of what IPIs are
being used for.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20 15:08:01 +00:00
Bjorn Forsman
3534cccd26 ARM: pxa/colibri: setup pins for USB host port 3
Tested on a Colibri Evaluation Board Rev.2.1 with a Colibri PXA310 module.

Signed-off-by: Bjorn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-12-20 23:07:50 +08:00