Commit graph

752,007 commits

Author SHA1 Message Date
Philippe CORNU
2b7ed18bed drm/panel: Add support for Raydium RM68200 panel driver
This patch adds Raydium Semiconductor Corporation RM68200 5.5" 720x1280
TFT LCD panel driver (MIPI-DSI video mode).

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302153222.4377-3-philippe.cornu@st.com
2018-03-12 09:27:57 +01:00
tianshuliang
d1b0399543 clk: hi3798cv200: add emmc sample and drive clock
It adds eMMC sample clock HISTB_MMC_SAMPLE_CLK and drive clock
HISTB_MMC_DRV_CLK support for Hi3798cv200 SoC.

Signed-off-by: tianshuliang <tianshuliang@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-03-12 15:56:58 +08:00
tianshuliang
811f67cc16 clk: hisilicon: add hisi phase clock support
Add a phase clock type for HiSilicon SoCs,which supports
clk_set_phase operation.

Signed-off-by: tianshuliang <tianshuliang@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2018-03-12 15:56:40 +08:00
Philippe CORNU
c6a8245e01 dt-bindings: display: panel: Add support for Raydium RM68200 DSI panel
The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280
TFT LCD panel connected using a MIPI-DSI video interface.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302153222.4377-2-philippe.cornu@st.com
2018-03-12 08:44:31 +01:00
Fabio Estevam
4e017f1419 dt-bindings: ifc: Fix the unit address format in the examples
DTC warnings will be seen if these examples are used in a real dts file
due to a mismatch in the unit address notation.

Align the unit address notation to what is done in the real dts files
as per commit f81d7af795 ("arm64: dts: fsl: fix ifc simple-bus unit
address format warnings")

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-12 15:38:49 +08:00
Martin Kaiser
f4be9b77fa ARM: dts: i.MX25: define SSI FIFO depth
According to the i.MX25 reference manuals, each SSI has four FIFOs. All
of those FIFOs can store up to 15 entries.

The fsl_ssi driver's internal default for the FIFO depth in 8. Set our
non-default FIFO depth explicitly in the Device Tree.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-12 15:23:36 +08:00
Eric Anholt
5651e5e094 drm/panel: simple: Fix the bus format for the Ontat panel
This fixes bad color output.  When I was first testing the device I
had the DPI hardware set to 666 mode, but apparently in the refactor
to use the bus_format information from the panel driver, I failed to
actually update the panel.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: e8b6f561b2 ("drm/panel: simple: Add the 7" DPI panel from Adafruit")
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309233332.1769-1-eric@anholt.net
2018-03-12 08:23:01 +01:00
Brian Foster
0ab32086d0 xfs: account only rmapbt-used blocks against rmapbt perag res
The rmapbt perag metadata reservation reserves blocks for the
reverse mapping btree (rmapbt). Since the rmapbt uses blocks from
the agfl and perag accounting is updated as blocks are allocated
from the allocation btrees, the reservation actually accounts blocks
as they are allocated to (or freed from) the agfl rather than the
rmapbt itself.

While this works for blocks that are eventually used for the rmapbt,
not all agfl blocks are destined for the rmapbt. Blocks that are
allocated to the agfl (and thus "reserved" for the rmapbt) but then
used by another structure leads to a growing inconsistency over time
between the runtime tracking of rmapbt usage vs. actual rmapbt
usage. Since the runtime tracking thinks all agfl blocks are rmapbt
blocks, it essentially believes that less future reservation is
required to satisfy the rmapbt than what is actually necessary.

The inconsistency is rectified across mount cycles because the perag
reservation is initialized based on the actual rmapbt usage at mount
time. The problem, however, is that the excessive drain of the
reservation at runtime opens a window to allocate blocks for other
purposes that might be required for the rmapbt on a subsequent
mount. This problem can be demonstrated by a simple test that runs
an allocation workload to consume agfl blocks over time and then
observe the difference in the agfl reservation requirement across an
unmount/mount cycle:

  mount ...: xfs_ag_resv_init: ... resv 3193 ask 3194 len 3194
  ...
  ...      : xfs_ag_resv_alloc_extent: ... resv 2957 ask 3194 len 1
  umount...: xfs_ag_resv_free: ... resv 2956 ask 3194 len 0
  mount ...: xfs_ag_resv_init: ... resv 3052 ask 3194 len 3194

As the above tracepoints show, the reservation requirement reduces
from 3194 blocks to 2956 blocks as the workload runs.  Without any
other changes in the filesystem, the same reservation requirement
jumps from 2956 to 3052 blocks over a umount/mount cycle.

To address this divergence, update the RMAPBT reservation to account
blocks used for the rmapbt only rather than all blocks filled into
the agfl. This patch makes several high-level changes toward that
end:

1.) Reintroduce an AGFL reservation type to serve as an accounting
    no-op for blocks allocated to (or freed from) the AGFL.
2.) Invoke RMAPBT usage accounting from the actual rmapbt block
    allocation path rather than the AGFL allocation path.

The first change is required because agfl blocks are considered free
blocks throughout their lifetime. The perag reservation subsystem is
invoked unconditionally by the allocation subsystem, so we need a
way to tell the perag subsystem (via the allocation subsystem) to
not make any accounting changes for blocks filled into the AGFL.

The second change causes the in-core RMAPBT reservation usage
accounting to remain consistent with the on-disk state at all times
and eliminates the risk of leaving the rmapbt reservation
underfilled.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:57 -07:00
Brian Foster
2159286335 xfs: rename agfl perag res type to rmapbt
The AGFL perag reservation type accounts all allocations that feed
into (or are released from) the allocation group free list (agfl).
The purpose of the reservation is to support worst case conditions
for the reverse mapping btree (rmapbt). As such, the agfl
reservation usage accounting only considers rmapbt usage when the
in-core counters are initialized at mount time.

This implementation inconsistency leads to divergence of the in-core
and on-disk usage accounting over time. In preparation to resolve
this inconsistency and adjust the AGFL reservation into an rmapbt
specific reservation, rename the AGFL reservation type and
associated accounting fields to something more rmapbt-specific. Also
fix up a couple tracepoints that incorrectly use the AGFL
reservation type to pass the agfl state of the associated extent
where the raw reservation type is expected.

Note that this patch does not change perag reservation behavior.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:57 -07:00
Brian Foster
b3fed43482 xfs: account format bouncing into rmapbt swapext tx reservation
The extent swap mechanism requires a unique implementation for
rmapbt enabled filesystems. Because the rmapbt tracks extent owner
information, extent swap must individually unmap and remap each
extent between the two inodes.

The rmapbt extent swap transaction block reservation currently
accounts for the worst case bmapbt block and rmapbt block
consumption based on the extent count of each inode. There is a
corner case that exists due to the extent swap implementation that
is not covered by this reservation, however.

If one of the associated inodes is just over the max extent count
used for extent format inodes (i.e., the inode is in btree format by
a single extent), the unmap/remap cycle of the extent swap can
bounce the inode between extent and btree format multiple times,
almost as many times as there are extents in the inode (if the
opposing inode happens to have one less, for example). Each back and
forth cycle involves a block free and allocation, which isn't a
problem except for that the initial transaction reservation must
account for the total number of block allocations performed by the
chain of deferred operations. If not, a block reservation overrun
occurs and the filesystem shuts down.

Update the rmapbt extent swap block reservation to check for this
situation and add some block reservation slop to ensure the entire
operation succeeds. We'd never likely require reservation for both
inodes as fsr wouldn't defrag the file in that case, but the
additional reservation is constrained by the data fork size so be
cautious and check for both.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:57 -07:00
Brian Foster
3e78b9a468 xfs: shutdown if block allocation overruns tx reservation
The ->t_blk_res_used field tracks how many blocks have been used in
the current transaction. This should never exceed the block
reservation (->t_blk_res) for a particular transaction. We currently
assert this condition in the transaction block accounting code, but
otherwise take no additional action should this situation occur.

The overrun generally has no effect if space ends up being available
and the associated transaction commits. If the transaction is
duplicated, however, the current block usage is used to determine
the remaining block reservation to be transferred to the new
transaction. If usage exceeds reservation, this calculation
underflows and creates a transaction with an invalid and excessive
reservation. When the second transaction commits, the release of
unused blocks corrupts the in-core free space counters. With lazy
superblock accounting enabled, this inconsistency eventually
trickles to the on-disk superblock and corrupts the filesystem.

Replace the transaction block usage accounting assert with an
explicit overrun check. If the transaction overruns the reservation,
shutdown the filesystem immediately to prevent corruption. Add a new
assert to xfs_trans_dup() to catch any callers that might induce
this invalid state in the future.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:57 -07:00
Matthew Wilcox
57e8095611 xfs: Rename xa_ elements to ail_
This is a simple rename, except that xa_ail becomes ail_head.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:56 -07:00
Dave Chinner
ae23395d88 inode: don't memset the inode address space twice
Noticed when looking at why cycling 600k inodes/s through the inode
cache was taking a total of 8% cpu in memset() during inode
initialisation.  There is no need to zero the inode.i_data structure
twice.

This increases single threaded bulkstat throughput from ~200,000
inodes/s to ~220,000 inodes/s, so we save a substantial amount of
CPU time per inode init by doing this.

Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:56 -07:00
Dave Chinner
a78ee256c3 xfs: convert XFS_AGFL_SIZE to a helper function
The AGFL size calculation is about to get more complex, so lets turn
the macro into a function first and remove the macro.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
[darrick: forward port to newer kernel, simplify the helper]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-03-11 20:27:56 -07:00
Darrick J. Wong
6231848c3a xfs: check for cow blocks before trying to clear them
There's no point in allocating a transaction and locking the inode in
preparation to clear cow blocks if there actually are any cow fork
extents.  Therefore, move the xfs_reflink_cancel_cow_range hunk to
xfs_inactive and check the cow ifp first.  This makes inode reclamation
run faster.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-03-11 20:27:56 -07:00
Darrick J. Wong
3f883f5bb1 xfs: convert a few more directory asserts to corruption
Yet another round of playing whack-a-mole with directory code that
asserts on corrupt on-disk metadata when it really should be returning
-EFSCORRUPTED instead of ASSERTing.  Found by a xfs/391 crash while
lastbit fuzzing of ltail.bestcount.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-03-11 20:27:56 -07:00
Darrick J. Wong
8241f7f983 xfs: don't iunlock the quota ip when quota block
In xfs_qm_dqalloc, we join the locked quota inode to the transaction we
use to allocate blocks.  If the allocation or mapping fails, we're not
allowed to unlock the inode because the transaction code is in charge of
unlocking it for us.  Therefore, remove the iunlock call to avoid
blowing asserts about unbalanced locking + mount hang.

Found by corrupting the AGF and allocating space in the filesystem
(quotacheck) immediately after mount.  The upcoming agfl wrapping fixup
test will trigger this scenario.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-03-11 20:27:56 -07:00
Vratislav Bendel
19957a1816 xfs: Correctly invert xfs_buftarg LRU isolation logic
Due to an inverted logic mistake in xfs_buftarg_isolate()
the xfs_buffers with zero b_lru_ref will take another trip
around LRU, while isolating buffers with non-zero b_lru_ref.

Additionally those isolated buffers end up right back on the LRU
once they are released, because b_lru_ref remains elevated.

Fix that circuitous route by leaving them on the LRU
as originally intended.

Signed-off-by: Vratislav Bendel <vbendel@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:56 -07:00
Dave Chinner
4df0f7f145 xfs: fix transaction allocation deadlock in IO path
xfs_trans_alloc() does GFP_KERNEL allocation, and we can call it
while holding pages locked for writeback in the ->writepages path.
The memory allocation is allowed to wait on pages under writeback,
and so can wait on pages that are tagged as writeback by the
caller.

This affects both pre-IO submission and post-IO submission paths.
Hence xfs_setsize_trans_alloc(), xfs_reflink_end_cow(),
xfs_iomap_write_unwritten() and xfs_reflink_cancel_cow_range().
xfs_iomap_write_unwritten() already does the right thing, but the
others don't. Fix them.

Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Fixes: 281627df3e ("xfs: log file size updates at I/O completion time")
Fixes: 43caeb187d ("xfs: move mappings from cow fork to data fork after copy-write)"
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
Christoph Hellwig
c3b1b13190 xfs: implement the lazytime mount option
Use the VFS dirty inode tracking for lazytime inodes only, and just
log them in ->dirty_inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
Christoph Hellwig
0d07e5573f fs: don't clear I_DIRTY_TIME before calling mark_inode_dirty_sync
__mark_inode_dirty already takes care of that, and for the XFS lazytime
implementation we need to know that ->dirty_inode was called because
I_DIRTY_TIME was set.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
Nikolay Borisov
bcab2ebfa1 xfs: Remove dead code from inode recover function
The memcpy is guarded by a check which is performed a right before we
call xfs_log_dinode_to_disk. At this point we are sure this check will
always be false otherwise we would have errored out. So let's remove
this dead weight.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
Carlos Maiolino
e157ebdcb3 Cleanup old XFS_BTREE_* traces
Remove unused legacy btree traces from IRIX era.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
Eric Sandeen
4603fa744c xfs: remove unused m_dmevmask from xfs_mount struct
The dmevmask structure member is a dmapi leftover; it's
set here and there but never actually used.  Remove it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
Dave Chinner
cb0a8d2302 xfs: fall back to vmalloc when allocation log vector buffers
When using large directory blocks, we regularly see memory
allocations of >64k being made for the shadow log vector buffer.
When we are under memory pressure, kmalloc() may not be able to find
contiguous memory chunks large enough to satisfy these allocations
easily, and if memory is fragmented we can potentially stall here.

TO avoid this problem, switch the log vector buffer allocation to
use kmem_alloc_large(). This will allow failed allocations to fall
back to vmalloc and so remove the dependency on large contiguous
regions of memory being available. This should prevent slowdowns
and potential stalls when memory is low and/or fragmented.

Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
David S. Miller
8b4c6ed2ed Merge branch 'hns3-next'
Peng Li says:

====================
fix some bugs for HNS3 driver

This patchset fixes some bugs for HNS3 driver:
[Patch 1/12 - Patch 8/12] fix various bugs for PF driver.
[Patch 9/12 - Patch 12/12] fix issues when change the us mac address of
PF/VF device to an existent one in the mac_vlan table.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:33 -04:00
Jian Shen
2097fdefa5 net: hns3: add result checking for VF when modify unicast mac address
VF changes unicast mac address by sending mailbox msg to PF, then PF
completes the mac address modification. It may fail when the target
uc mac address is already in the mac_vlan table. VF should be aware
of it by reading the message result.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:32 -04:00
Jian Shen
d07b6bb435 net: hns3: add existence checking before adding unicast mac address
It's not allowed to add two same unicast mac address entries to the
mac_vlan table. When modify the uc mac address of a VF device to the
same value with the PF device's, the PF device will lose its entry of
the mac_vlan table.

Lookup the mac address in the mac_vlan table, and add it if the entry
is inexistent.

Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:32 -04:00
Jian Shen
eefd00a5d7 net: hns3: fix return value error of hclge_get_mac_vlan_cmd_status()
Error code -EIO was used to indicate mutilple errors in function
hclge_get_mac_vlan_cmd_status().This patch fixes it by using
error code depending on the error type.

For no space error, return -ENOSPC.
For entry not found, return -ENOENT.
For command send fail, return -EIO.
For invalid op code, return -EINVAL.

Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:32 -04:00
Jian Shen
aa7a795eec net: hns3: fix error type definition of return value
An enum type variable was used to store an "int" type return value.
This patch fixes it.

Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:32 -04:00
Yunsheng Lin
5d02a58dae net: hns3: fix for buffer overflow smatch warning
This patch fixes the buffer overflow warning by refactoring
hclgevf_bind_ring_to_vector and hclge_get_ring_chain_from_mbx.

Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Fixes: dde1a86e93 ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:32 -04:00
Yunsheng Lin
f96818a7cc net: hns3: fix for loopback failure when vlan filter is enable
When vlan ctag filter is enabled, the loopback selftest fails because
loopback selftest does not support vlan.

This patch fixes it by disabling the vlan ctag filter when runnig
loopback selftest.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:32 -04:00
Peng Li
64fd2300fc net: hns3: add support for querying pfc puase packets statistic
This patch add support for querying pfc puase packets statistic
in hclge_ieee_getpfc, which is used to tell user how many pfc
puase packets have been sent and received by this mac port.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:32 -04:00
Peng Li
f8d291f00b net: hns3: fix rx path skb->truesize reporting bug
Original skb->truesize reports the received packet size,
not the actual buffer size NIC driver allocated(1 Page).
The linux net protocol will misjudge the true size of rx queue.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:31 -04:00
Fuyun Liang
e98d7183f6 net: hns3: unify the pause params setup function
Since the firmware cmd to setup mac pause params is the same as the
firmware cmd to pfc pause params, this patch unifies the pause params
setup function.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:31 -04:00
Fuyun Liang
20e4bf982b net: hns3: fix for ipv6 address loss problem after setting channels
The function of dev_close and dev_open is just likes ifconfig <netif> down
and ifconfig <netif> up. The ipv6 address will be lost after dev_close and
dev_open are called. This patch uses hns3_nic_net_stop to replace dev_close
and uses hns3_nic_net_open to replace dev_open.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:31 -04:00
Fuyun Liang
8cc6c1f77b net: hns3: fix for netdev not running problem after calling net_stop and net_open
The link status update function is called by timer every second. But
net_stop and net_open may be called with very short intervals. The link
status update function can not detect the link state has changed. It
causes the netdev not running problem.

This patch fixes it by updating the link state in ae_stop function.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:31 -04:00
Fuyun Liang
590980558b net: hns3: add existence check when remove old uc mac address
When driver is in initial state, the mac_vlan table table is empty.
So the delete operation for mac address must fail. Existence check
is needed here. Otherwise, the error message will make user confused.

Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:53:31 -04:00
zhangliping
ddc502dfed openvswitch: meter: fix the incorrect calculation of max delta_t
Max delat_t should be the full_bucket/rate instead of the full_bucket.
Also report EINVAL if the rate is zero.

Fixes: 96fbc13d7e ("openvswitch: Add meter infrastructure")
Cc: Andy Zhou <azhou@ovn.org>
Signed-off-by: zhangliping <zhangliping02@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:48:59 -04:00
Shannon Nelson
13fbcc8dc5 macvlan: filter out unsupported feature flags
Adding a macvlan device on top of a lowerdev that supports
the xfrm offloads fails with a new regression:
  # ip link add link ens1f0 mv0 type macvlan
  RTNETLINK answers: Operation not permitted

Tracing down the failure shows that the macvlan device inherits
the NETIF_F_HW_ESP and NETIF_F_HW_ESP_TX_CSUM feature flags
from the lowerdev, but with no dev->xfrmdev_ops API filled
in, it doesn't actually support xfrm.  When the request is
made to add the new macvlan device, the XFRM listener for
NETDEV_REGISTER calls xfrm_api_check() which fails the new
registration because dev->xfrmdev_ops is NULL.

The macvlan creation succeeds when we filter out the ESP
feature flags in macvlan_fix_features(), so let's filter them
out like we're already filtering out ~NETIF_F_NETNS_LOCAL.
When XFRM support is added in the future, we can add the flags
into MACVLAN_FEATURES.

This same problem could crop up in the future with any other
new feature flags, so let's filter out any flags that aren't
defined as supported in macvlan.

Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:46:16 -04:00
David S. Miller
daa13701a9 Merge branch 'selftests-forwarding-Tweaks-and-a-new-test'
Ido Schimmel says:

====================
selftests: forwarding: Tweaks and a new test

First patch adds a new test for VLAN-unaware bridges.

Next two patches make the tests fail in case they are missing interfaces
or dependencies.

Last patch allows one to create the veth interfaces even without the
optional configuration file.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:44:24 -04:00
Ido Schimmel
59be45c375 selftests: forwarding: Allow creation of interfaces without a config file
Some users want to be able to run the tests without a configuration file
which is useful when one needs to test both virtual and physical
interfaces on the same machine.

Move the defines that set the type of interface to create and whether to
create it away from the optional configuration file to the library like
the rest of the defines.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:44:24 -04:00
Ido Schimmel
231b85abaa selftests: forwarding: Exit with error when missing interfaces
Returning 0 gives a false sense of success when the required modules did
not even manage to be initialized and register the required net devices.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:44:24 -04:00
Ido Schimmel
ff0162af9e selftests: forwarding: Exit with error when missing dependencies
We already return an error when some dependencies (e.g., 'jq') are
missing so lets be consistent and do that for all.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:44:24 -04:00
Ido Schimmel
3a021ab564 selftests: forwarding: Add a test for VLAN-unaware bridge
Similar to the VLAN-aware bridge test, test the VLAN-unaware bridge and
make sure that ping, FDB learning and flooding work as expected.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-11 22:44:23 -04:00
Shawn Lin
7f95beea36 clk: update cached phase to respect the fact when setting phase
It's found that the final phase set by driver doesn't match that of
the output from clk_summary:

dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 346
mmc0: new ultra high speed SDR104 SDIO card at address 0001

cat /sys/kernel/debug/clk/clk_summary | grep sdio_sample
sdio_sample	0        1        0    50000000 0 0

It seems the cached core->phase isn't updated after the clk was
registered. So fix this issue by updating the core->phase if setting
phase successfully.

Fixes: 9e4d04adeb ("clk: add clk_core_set_phase_nolock function")
Cc: Stable <stable@vger.kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2018-03-11 18:21:19 -07:00
Maciej Purski
6888384421 drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL
Currently MHL chip must be turned on permanently to detect MHL cable. It
duplicates micro-USB controller's (MUIC) functionality and consumes
unnecessary power. Lets use extcon attached to MUIC to enable MHL chip
only if it detects MHL cable.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-12 10:18:26 +09:00
Linus Torvalds
0c8efd610b Linux 4.16-rc5 v4.16-rc5 2018-03-11 17:25:09 -07:00
Sean Wang
73ce2ce129 soc: mediatek: fix the mistaken pointer accessed when subdomains are added
Fix the pointer to struct scp_subdomian not being moved forward
when each sub-domain is expected to be iteratively added through
pm_genpd_add_subdomain call.

Cc: stable@vger.kernel.org
Fixes: 53fddb1a66 ("soc: mediatek: reduce code duplication of scpsys_probe across all SoCs")
Reported-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-11 23:46:50 +01:00
Sean Wang
c932ba8c38 soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
Add SCPSYS power domain driver for MT7623A SoC. The MT7623A's power
domains are the subset of MT7623 SoC's ones. As MT7623 SoC has full
features whereas MT7623A is being designed just for router applications.
Thus, MT7623A doesn't include those power domains multimedia function
belongs to. In order to avoid certain errors undoubtedly happening at
registering those power domains on MT7623A SoC using the existing MT7623
SCPSYS driver, it's required to define another setup specifically for
MT7623A SoC.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-11 23:43:07 +01:00