Commit graph

752,007 commits

Author SHA1 Message Date
Peng Li
cc719218e9 net: hns3: add support for VF driver inner interface hclgevf_ops.get_tqps_and_rss_info
This patch adds support for VF driver inner interface
hclgevf_ops.get_tqps_and_rss_info. This interface will be
used in the initialization process.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:23:37 -05:00
Peng Li
678335a123 net: hns3: set the max ring num when alloc netdev
HNS3 driver should alloc netdev with max support ring num, as
driver support change netdev count by ethtool -L.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:23:37 -05:00
Peng Li
814e0274fd net: hns3: fix the queue id for tqp enable&&reset
Command HCLGE_OPC_CFG_COM_TQP_QUEUE should use queue id in the
function, but command HCLGE_OPC_RESET_TQP_QUEUE should use global
queue id.
This patch fixes the queue id about queue enable/disable/reset.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:23:37 -05:00
Peng Li
f18f0d4d68 net: hns3: fix endian issue when PF get mbx message flag
This patch fixes the endian issue when PF get mbx message flag.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:23:37 -05:00
Peng Li
090e3b5350 net: hns3: set the cmdq out_vld bit to 0 after used
Driver check the out_vld bit when get a new cmdq BD, if the bit is 1,
the BD is valid. driver Should set the bit 0 after used and hw will
set the bit 1 if get a valid BD.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:23:36 -05:00
Peng Li
f5e084b827 net: hns3: VF should get the real rss_size instead of rss_size_max
VF driver should get the real rss_size which is assigned
by host PF, not rss_size_max.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:23:36 -05:00
Arkadi Sharshevsky
67ae686b3e devlink: Change dpipe/resource get privileges
Let dpipe/resource be retrieved by unprivileged users.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:21:08 -05:00
Arkadi Sharshevsky
cbcc607e18 team: Fix double free in error path
The __send_and_alloc_skb() receives a skb ptr as a parameter but in
case it fails the skb is not valid:
- Send failed and released the skb internally.
- Allocation failed.

The current code tries to release the skb in case of failure which
causes redundant freeing.

Fixes: 9b00cf2d10 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:19:52 -05:00
Roland Dreier
0475821e22 nvme-fabrics: Ignore nr_io_queues option for discovery controllers
This removes a dependency on the order options are passed when creating
a fabrics controller.  With the old code, if "nr_io_queues" appears before
an "nqn" option specifying the discovery controller, then nr_io_queues
is overridden with zero.  If "nr_io_queues" appears after specifying the
discovery controller, then the nr_io_queues option is used to set the
number of queues, and the driver attempts to establish IO connections
to the discovery controller (which doesn't work).

It seems better to ignore (and warn about) the "nr_io_queues" option
if userspace has already asked to connect to the discovery controller.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-03-08 09:19:17 -07:00
James Hogan
55fe6da9ef kbuild: Handle builtin dtb file names containing hyphens
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image. This
assembly source contains labels before and after the binary data. The
label names incorporate the file name of the corresponding .dtb file.
Hyphens are not legal characters in labels, so .dtb files built into the
kernel with hyphens in the file name result in errors like the
following:

bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'

Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
name to underscores when constructing the labels.

As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
contain hyphens in their names, but the issue only currently manifests
on Broadcom MIPS platforms, as that is the only place where such files
are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
or on BMIPS kernels when the dtbs target is used (in the latter case it
admittedly shouldn't really build all the dtb.o files, but thats a
separate issue).

Fixes: 695835511f ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-09 01:14:38 +09:00
Anders Roxell
dcf1bcb6ae selftests/net: enable fragments for fib-onlink-tests
We miss CONFIG_* fragments so test fib-onlink-tests.sh can do:
ip li add lisa type vrf table 1101
ip li add veth1 type veth peer name veth2

And the follow message occurs if it isn't enabled:
Configuring interfaces
RTNETLINK answers: Operation not supported

This enables for NET_NRF (and friends) and VETH so we can create a vrf
table and veth.

Fixes: 153e1b84f4 ("selftests: Add FIB onlink tests")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:14:02 -05:00
Paolo Abeni
ae5799dc7e ipvlan: properly annotate rx_handler access
The rx_handler field is rcu-protected, but I forgot to use the
proper accessor while refactoring netif_is_ipvlan_port(). Such
function only check the rx_handler value, so it is safe, but we need
to properly read rx_handler via rcu_access_pointer() to avoid sparse
warnings.

Fixes: 1ec54cb44e ("net: unpollute priv_flags space")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08 11:12:43 -05:00
Matteo Croce
61fc470814 scripts/bloat-o-meter: fix typos in help
The bloat-o-meter script has two typos in the help, fix both.

Fixes: 192efb7a1f ("bloat-o-meter: provide 3 different arguments for data, function and All")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-09 01:12:31 +09:00
Mikko Perttunen
7f64875003 arm64: defconfig: Enable NVIDIA Tegra194 support
Enable NVIDIA Tegra194 support in the default 64-bit ARM configuration.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 17:03:41 +01:00
Thierry Reding
507c655a06 soc/tegra: pmc: Pass PMC to tegra_powergate_power_up()
tegra_powergate_sequence_power_up() makes up a struct tegra_powergate
from scratch in order to reuse the same code as used by the generic PM
domain implementation. However, subsequent patches will need to access
the struct tegra_pmc * embedded in the powergate structure, so we need
to make sure we always pass it in.

Tested-by: Hector Martin <marcan@marcan.st>
Tested-by: Andre Heider <a.heider@gmail.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 17:02:43 +01:00
Peter De Schrijver
a263394a09 soc/tegra: pmc: MBIST work around for Tegra210
Apply the memory built-in self test work around when ungating certain
Tegra210 power domains.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Hector Martin <marcan@marcan.st>
Tested-by: Andre Heider <a.heider@gmail.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 17:02:24 +01:00
Krish Sadhukhan
0c7f650e10 KVM: nVMX: Enforce NMI controls on vmentry of L2 guests
According to Intel SDM 26.2.1.1, the following rules should be enforced
on vmentry:

 *  If the "NMI exiting" VM-execution control is 0, "Virtual NMIs"
    VM-execution control must be 0.
 *  If the “virtual NMIs” VM-execution control is 0, the “NMI-window
    exiting” VM-execution control must be 0.

This patch enforces these rules when entering an L2 guest.

Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-03-08 16:54:03 +01:00
Mikko Perttunen
56327f54d9 soc/tegra: pmc: Add Tegra194 compatibility string
The Tegra194 PMC is mostly compatible with Tegra186, including in all
currently supported features. As such, add a new compatibility string
but point to the existing Tegra186 SoC data for now.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:44:01 +01:00
Mikko Perttunen
6f9ed07fde soc/tegra: Add Tegra194 SoC configuration option
Add the configuration option to enable support for the Tegra194 system-
on-chip.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:44:01 +01:00
Sylwester Nawrocki
d9e575127b
ASoC: Use proper DT compatible string for Hardkernel Odroid boards
The Odroid boards are manufactured by Hardkernel, not Samsung. New compatible
string entries are added, with "hardkernel," instead of "samsung," vendor
prefix. Support for the old compatible strings is going to be removed after
some time.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-08 15:37:29 +00:00
Rob Herring
c679fa6e3a Merge branch 'dtc-update' into dt/next 2018-03-08 09:21:07 -06:00
Marcel Ziswiler
4957a2f1f2 ARM: tegra: apalis-tk1: Support v1.2 hardware revision
Support the V1.2 hardware revision with the following pin muxing
changes:

Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.

Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable signals.

Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power
enable signals are now used as GPIO3 and GPIO4.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:18:38 +01:00
Marcel Ziswiler
0d900bbbae ARM: tegra: apalis-tk1: Copyright period, spurious newlines
Update the copyright period and get rid of some spurious newlines.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:18:08 +01:00
Marcel Ziswiler
818e8729e1 ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOs
The Apalis TK1 module uses some dedicated GPIOs as I210 gigabit Ethernet
controller reset and to control RESET_MOCI aka reset module output
carrier input on MXM3 pin 26. The Apalis Evaluation Board furthermore
uses Apalis GPIO7 on MXM3 pin 15 as reset signal for its PLX PEX 8605
PCIe Switch.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:15:34 +01:00
Marcel Ziswiler
405698f072 ARM: tegra: apalis-tk1: Add missing as3722 gpio0 configuration
As the AS3722 GPIO0 is also a not connected on our Apalis TK1 module
explicitly configure it to high-impedance as well.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:15:13 +01:00
Greg Kroah-Hartman
7b4d930e0d usb: fixes for v4.16-rc4
Just small fixes now. The two most important are a fix for a a lock up
 on USB ID pin change during system suspend/resume on dwc3 and a
 use-after-free fix in ffs_fs_kill_sb().
 
 Apart from that, some DT compatible fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAlqg90IdHGZlbGlwZS5i
 YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQYnpBAAo6o11eE+yA3pRx5W
 FaJCPsdn4Q7YkXbCSTa/gYqNLG9aHjW47KM/lHkr+xdVHLtLBHsePwf5UE8tEirk
 Rd2flg0G+BdbvHs7Ps6bNAgs3f1B36uXwWqmJ+Hi+jniXmmWjlDoqeoyZXe5x6tZ
 /90fDEoGDYaPzY3HH3G6euADgdBzH0IdBrQYzJdU6m44TgWSwFA1UaTRRsWBWuQQ
 CtxRJUlOl1ZGVqCNWjzLfMfhTMoKYAy3fF08jMYUI4rpS9Cf0pi33hteFRZCaG8F
 2Q0N8ksvxJfqmRQZXKSPfSTFh8HQR7bRq+PzD32z+IUa+aJdTtIjPOj42roa7s8+
 h76xouI76u/88rDwTTtP6F5S7POBXSCY8M2Hgh6JHmIfiOXLe7M/i65UsKbkrzQ6
 +f5gUt9k0r2pXP+aoL0JaGOdkev9mzlt9qra0K7BWMHOICxS+rX0n4fFkf8oToPr
 GoFlByHt/0n5boXTqw4TudJ9R0rKUuNGo89G5XVMpRtT6s2nX6Xq9c0V0R2CSg1m
 auWmoh18QdLPKDkij/Ygh6ANccGNR6c+9JT16YZ6Cq+FhgptLxkvMpARKGU0VkB1
 Dpj779RQHmj9dMuKL5wWUN7lKMBrs0MOm7Thb0kcQdorG9uOTJPjEskuPByW+Ej8
 dV4GgPKow0C3Lkp3G75j9xPRrQU=
 =/rNB
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.16-rc4

Just small fixes now. The two most important are a fix for a a lock up
on USB ID pin change during system suspend/resume on dwc3 and a
use-after-free fix in ffs_fs_kill_sb().

Apart from that, some DT compatible fixes.
2018-03-08 07:14:29 -08:00
Marcel Ziswiler
e18dc29620 ARM: tegra: apalis-tk1: Activate PWM pin muxing for pwm3
Activate PWM pin muxing for Apalis PWM3. Note that the same PWM3 is
already active on pu6 being Apalis BKL1_PWM as well. Therefore exporting
that one for raw sysfs access will fail and one has to revert to using
the PWM backlight.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:13:33 +01:00
Marcel Ziswiler
d174e9465d ARM: tegra: apalis-tk1: Set critical trips
Set "critical" trip temperatures for cpu, gpu, mem and pllx thermal
zones. These trips can trigger shut down or reset.

Similar to commit 40823f8e26 ("arm: tegra: set critical trips for
Tegra124").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:12:50 +01:00
Colin Ian King
0338753a57
ASoC: cygnus: remove redundant assignment to pointer 'res'
The pointer res is being initialized with a value that is never read
and re-assigned immediately after, hence the initialization is redundant
and can be removed.

Cleans up clang warning:
sound/soc/bcm/cygnus-ssp.c:1284:19: warning: Value stored to 'res'
during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-08 15:11:24 +00:00
Marcel Ziswiler
563554b53e ARM: tegra: apalis/colibri: Remove unneeded reg property
As described in
Documentation/devicetree/bindings/input/touchscreen/stmpe.txt there is
no 'reg' property under stmpe_touchscreen, so remove it to fix the
following build warning with W=1:

arch/arm/boot/dts/tegra30-apalis-eval.dtb:
Warning (unit_address_vs_reg): Node
/i2c@7000d000/stmpe811@41/stmpe_touchscreen has a reg or ranges
property, but no unit name

Similar to commit 89277e8e26 ("ARM: dts: imx6qdl-apalis: Remove
unneeded reg property").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:10:54 +01:00
Marcel Ziswiler
29a62759b0 ARM: tegra: apalis/colibri: Use correct compatible for RTC
All Toradex Carrier Boards use a st,m41t0 compatible RTC. Compared to a
st,m41t00 this RTC has also an oscillator fail bit which allows to
detect when the RTC lost track of time.

Similar to commit c53bec16b1 ("ARM: dts: colibri/apalis: use correct
compatible for RTC") covering our NXP i.MX and Vybrid based modules.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:10:18 +01:00
Marcel Ziswiler
1c3389e6cb ARM: tegra: Fix I2C bus frequencies on Apalis/Colibri
Use a faster speed of 400 kbit/s for regular I2C busses.

Use a slower speed of 10 kbit/s for DDC/EDID to improve reliability.

Use a slower speed of 100 kbit/s for power I2C to be within specs of
the LM95245 temperature sensor.

While at it further annotate I2C pin usage.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:08:20 +01:00
Marcel Ziswiler
1014e895f8 ARM: tegra: venice2: Remove duplicate pcie-1 node
Get rid of duplicate pcie-1 node.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:06:45 +01:00
Marcel Ziswiler
4e0be1be4d ARM: tegra: beaver: Remove invalid uses of rsvd1
Remove invalid uses of rsvd1 from Beaver device tree. Replace by actual
function names of pinmux option 1.

Taken from https://github.com/NVIDIA/tegra-pinmux-scripts commit
b0aceda108c0 ("remove invalid uses of rsvd1 from beaver config").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:06:45 +01:00
Marcel Ziswiler
b604ef9ceb ARM: tegra: Use proper IRQ type definitions
This switches a few interrupt definitions that were using either
GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW as IRQ type, which is invalid.

This is mostly a cosmetic change, that doesn't affect any driver.

Analogous to Paul's commit 38333641b6 ("ARM: tegra: nyan: Use proper
IRQ type definitions").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:06:41 +01:00
Marcel Ziswiler
2c73055692 dt/bindings: Fix binding examples for Tegra GMI controller
Fix devicetree binding examples for the Generic Memory Interface (GMI)
bus driver found on Tegra SOCs.

While at it also remove double new lines as a left over from Rob's
commit 4da722ca19 ("dt-bindings: Remove "status" from examples").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-08 16:03:33 +01:00
Borislav Petkov
24193c5de4 x86/MCE: Cleanup and complete struct mce fields definitions
The struct is part of the uapi, document that fact and all fields properly
and fix formatting.

No functional changes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20180306142143.19990-3-bp@alien8.de
2018-03-08 15:52:59 +01:00
Thomas Gleixner
422caa5f7a Merge branch 'ras/urgent' into ras/core
Pick up urgent fixes to apply further development changes.
2018-03-08 15:52:08 +01:00
Seunghun Han
b3b7c4795c x86/MCE: Serialize sysfs changes
The check_interval file in

  /sys/devices/system/machinecheck/machinecheck<cpu number>

directory is a global timer value for MCE polling. If it is changed by one
CPU, mce_restart() broadcasts the event to other CPUs to delete and restart
the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the
mce_timer variable.

If more than one CPU writes a specific value to the check_interval file
concurrently, mce_timer is not protected from such concurrent accesses and
all kinds of explosions happen. Since only root can write to those sysfs
variables, the issue is not a big deal security-wise.

However, concurrent writes to these configuration variables is void of
reason so the proper thing to do is to serialize the access with a mutex.

Boris:

 - Make store_int_with_restart() use device_store_ulong() to filter out
   negative intervals
 - Limit min interval to 1 second
 - Correct locking
 - Massage commit message

Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com
2018-03-08 15:36:27 +01:00
Tony Luck
fa94d0c6e0 x86/MCE: Save microcode revision in machine check records
Updating microcode used to be relatively rare. Now that it has become
more common we should save the microcode version in a machine check
record to make sure that those people looking at the error have this
important information bundled with the rest of the logged information.

[ Borislav: Simplify a bit. ]

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180301233449.24311-1-tony.luck@intel.com
2018-03-08 15:34:49 +01:00
Stephane Eranian
2427b432e6 perf tools: Update quipper information
This patch updates the links to the Quipper library.  It is now
available from GitHub and has been updated.

Reported-by: Lakshman Annadorai <lakshmana@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520495985-2147-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:54 -03:00
Thomas Richter
0b4b6b78a3 perf annotate: Handle s390 PC relative load and store instruction.
S390 has several load and store instructions with target operand
addressing relative to the program counter, for example lrl, lgrl, strl,
stgrl.

These instructions are handled similar to x86. Objdump output displays
those instructions as:

   9595c: c4 2d 00 09 9c 54   lgrl   %r7,1c8540 <mp_+0x60>

This output is parsed (like on x86) and perf annotate shows those lines
as:

   lgrl   %r7,mp_+0x60

This patch handles the s390 specific instruction parsing for PC relative
load and store instructions.

Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:53 -03:00
Jin Yao
bb848c14f8 perf annotate: Support to display the IPC/Cycle in TUI mode
Unlike the perf report interactive annotate mode, the perf annotate
doesn't display the IPC/Cycle even if branch info is recorded in perf
data file.

perf record -b ...
perf annotate function

It should show IPC/cycle, but it doesn't.

This patch lets perf annotate support the displaying of IPC/Cycle if
branch info is in perf data.

For example,

  perf annotate compute_flag

  Percent│ IPC Cycle
         │
         │
         │                Disassembly of section .text:
         │
         │                0000000000400640 <compute_flag>:
         │                compute_flag():
         │                volatile int count;
         │                static unsigned int s_randseed;
         │
         │                __attribute__((noinline))
         │                int compute_flag()
         │                {
   22.96 │1.18   584        sub    $0x8,%rsp
         │                        int i;
         │
         │                        i = rand() % 2;
   23.02 │1.18     1      → callq  rand@plt
         │
         │                        return i;
   27.05 │3.37              mov    %eax,%edx
         │                }
         │3.37              add    $0x8,%rsp
         │                {
         │                        int i;
         │
         │                        i = rand() % 2;
         │
         │                        return i;
         │3.37              shr    $0x1f,%edx
         │3.37              add    %edx,%eax
         │3.37              and    $0x1,%eax
         │3.37              sub    %edx,%eax
         │                }
   26.97 │3.37     2      ← retq

Note that, this patch only supports TUI mode. For stdio, now it just keeps
original behavior. Will support it in a follow-up patch.

  $ perf annotate compute_flag --stdio

   Percent |      Source code & Disassembly of div for cycles:ppp (7993 samples)
  ------------------------------------------------------------------------------
           :
           :
           :
           :            Disassembly of section .text:
           :
           :            0000000000400640 <compute_flag>:
           :            compute_flag():
           :            volatile int count;
           :            static unsigned int s_randseed;
           :
           :            __attribute__((noinline))
           :            int compute_flag()
           :            {
      0.29 :   400640:       sub    $0x8,%rsp     # +100.00%
           :                    int i;
           :
           :                    i = rand() % 2;
     42.93 :   400644:       callq  400490 <rand@plt>     # -100.00% (p:100.00%)
           :
           :                    return i;
      0.10 :   400649:       mov    %eax,%edx     # +100.00%
           :            }
      0.94 :   40064b:       add    $0x8,%rsp
           :            {
           :                    int i;
           :
           :                    i = rand() % 2;
           :
           :                    return i;
     27.02 :   40064f:       shr    $0x1f,%edx
      0.15 :   400652:       add    %edx,%eax
      1.24 :   400654:       and    $0x1,%eax
      2.08 :   400657:       sub    %edx,%eax
           :            }
     25.26 :   400659:       retq # -100.00% (p:100.00%)

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180223170210.GC7045@tassilo.jf.intel.com
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1519724327-7773-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:52 -03:00
Wang YanQing
ea85ab24c5 perf report: Provide libtraceevent with a kernel symbol resolver
So that beautifiers wanting to resolve kernel function addresses to
names can do its work, and when we use "perf report" for output of "perf
kmem record", we will get kernel symbol output.

This patch affect the output of "perf report" for the record data
generated by "perf kmem record" looks like below:

Before patch:
0.01%  call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC
0.01%  call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO

After patch:
0.01%  (aa_alloc_task_context+0x27) call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO
0.01%  (__tty_buffer_request_room+0x88) call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC

Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180308032850.GA12383@udknight-ThinkPad-E550
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:51 -03:00
Jiri Olsa
5fb3d8b7b5 perf build: Force llvm/clang test compile output to .make.output
So we can see the output of feature compile in following files:

  tools/build/feature/test-llvm.make.output
  tools/build/feature/test-llvm-version.make.output
  tools/build/feature/test-clang.make.output

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:50 -03:00
Jiri Olsa
36f9dc33b9 perf build: Add llvm/clang make targets to FILES
So they can follow the OUTPUT variable setup as the rest of the
features.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:49 -03:00
Jiri Olsa
bd47668458 perf build: Add llvm/clang/cxx make tests into FEATURE_TESTS_EXTRA
So we can see the status when we build perf, like:

  $ make LIBCLANGLLVM=1 VF=1
  ...                           cxx: [ on  ]
  ...                          llvm: [ on  ]
  ...                  llvm-version: [ on  ]
  ...                         clang: [ on  ]

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:48 -03:00
Jiri Olsa
ed3956293f perf tools: Update tags with .cpp files
We have some .cpp files, make ctags/cscope aware of them.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:47 -03:00
Jiri Olsa
e2091cedd5 perf tools: Add MEM_TOPOLOGY feature to perf data file
Adding MEM_TOPOLOGY feature to perf data file,
that will carry physical memory map and its
node assignments.

The format of data in MEM_TOPOLOGY is as follows:

  0 - version          | for future changes
  8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes
 16 - count            | number of nodes

 For each node we store map of physical indexes for
 each node:

 32 - node id          | node index
 40 - size             | size of bitmap
 48 - bitmap           | bitmap of memory indexes that belongs to node
                       | /sys/devices/system/node/node<NODE>/memory<INDEX>

The MEM_TOPOLOGY could be displayed with following
report command:

  $ perf report --header-only -I
  ...
  # memory nodes (nr 1, block size 0x8000000):
  #    0 [7G]: 0-23,32-69

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-8-jolsa@kernel.org
[ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:46 -03:00
Jiri Olsa
5cedb413a6 perf c2c: Use mem_info refcnt logic
Switch to refcnt logic instead of duplicating mem_info objects. No
functional change, just saving some memory.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-08 11:30:45 -03:00