Commit graph

752,007 commits

Author SHA1 Message Date
Baolin Wang
0cb3dad02d arm64: dts: Add timer node for Spreadtrum SC9860
We will use one always-on timer to be the broadcast device, thus add
the timer device node for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-07 15:26:58 +01:00
Baolin Wang
d85bcd9c62 arm64: dts: Add pin controller node for Spreadtrum SC9860
This patch adds the pin controller device node for Spreadtrum
SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-07 15:26:48 +01:00
Baolin Wang
e254460a89 arm64: dts: Add ADI device node for Spreadtrum SC9860
We will access the PMIC through ADI controller, thus this patch adds
the ADI device node for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-07 15:26:36 +01:00
Baolin Wang
6c6fbbd1ab arm64: dts: Add hwspinlock node for Spreadtrum SC9860
The Spreadtrum SC9860 platform only has one hardware spinlock device,
which is located on AON system of Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-07 15:26:22 +01:00
Arnd Bergmann
f9b7128a30 DaVinci DT support enhancements for v4.17
* Lego EV3 gains firmware recovery mode support
 * Miscellaneous non-critical clean-up
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJalPyrAAoJEGFBu2jqvgRN+WIQAJcHwYPZhRK6U6ND3R4KPAiT
 keQR+EDf+2rmwlek93k6azgywKf2JE1l2nl6MKl6+VvMl/+Jhor1OVZMvSJE0KUZ
 0hQGZZ5klxjLgcgwMxKkk9ZQ3gC4XhgX1CHTETWAttCfBaBgwonGu+c9wQSsg0mW
 Gb3Efc64gdy6E/2/aGZZTwraXgjtPVu0jODRCzlc0KgANkPX6Lo0B1dmbVWEqJis
 2y4rM6tRXVPHx/bfKsgAIrhTBPFIT88deZ0kiQmwwvEcgZ4+BdpOAyztE51PKnWI
 DUelVqXjEu7JIi8mcQzAjvJlX7I1cqTQqMD0PQLZZlu2kl2PwcLwRoRtgCva6wre
 1rA/yqh/wt3WuiGRRyBvOdcRFaw+z08DUCosRAhOcpHI4E73tZ70flC7KHHvzUsh
 KqzVRgAvF3cs8XOEt/4/PrAVHll1wNeUhSm8rpjReJeoit7EQKFqEHsxexvSRDQD
 //pbJbPcr/ZwCNe8dceo/EIQsL6zJ9eZCNmWDMRE43OH5RcfZ0T61BG9PlofiTzW
 S8Y8HNRBjOYyax+veOLRNY8/MpKub+25vjcahuIpI6/n27Gk1vTj/It/rWy4LLzv
 BHMspR3R2lDP2xDeMiRYgokmqBitKZMClt4mWK4X3a64G6zbcsTdRVcGQHeK7hhl
 qlMlhf+41VxaiwwxtlxO
 =sOgP
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.17/dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Pull "DaVinci DT support enhancements for v4.17" from Sekhar Nori:

* Lego EV3 gains firmware recovery mode support
* Miscellaneous non-critical clean-up

* tag 'davinci-for-v4.17/dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-evm: add chosen and SPI alias
  ARM: dts: da850-lego-ev3: use a correct fallback for at24 compatible
  ARM: dts: da850-lego-ev3: Add node for reboot modes
2018-03-07 15:25:14 +01:00
Aaron Armstrong Skomra
b1f466a90c HID: wacom: generic: add the "Report Valid" usage
Wacom Bluetooth reports contain multiple pen frames per report.
Each frame contains a flag indicating if the frame is valid.
Future Wacom devices with this type of report may contain HID
descriptors, add support for this usage to the generic codepath
of the Wacom driver.

Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-07 15:21:44 +01:00
Aaron Armstrong Skomra
f8b6a74719 HID: wacom: generic: Support multiple tools per report
Some Wacom devices contain contain Pen and Pad usages in
the same report. Future devices of this type may utilize
HID Descriptors.

The generic code path of the Wacom driver previously
assumed pen, touch, and pad reports were delivered in
separate reports. This patch adds support for processing
each collection of a report separately, in order to support
reports with multiple tools.

Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-07 15:21:44 +01:00
Aaron Armstrong Skomra
87046b6c99 HID: wacom: Add support for 3rd generation Intuos BT
Use the code path that predates generic device support.

Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-07 15:21:44 +01:00
Arnd Bergmann
fbefc5321e STi dts update:
Fix all DT dtc warnings when building with W=1
 For most of implicated node, the addition of a fake reg property
 fixes these warnings.
 For others nodes, their location in device tree
 have been updated.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJak8PtAAoJEMrHeC97M/+mKkAQAIojX6u67lNj5lEW8MHbpzWa
 q/61ofRqB36vuVRT8hL1rGyinubtzPxkwnyYbCdp5C5mu4qnpvXfW2AXqrGZTsdu
 E91klWLigKArvKLTo8fC1bej1qz9ftHzB8xlyJKxokBcuqGO+QqeUgkImHjWHqJl
 UST+vbCmY4VTlKnstoEfQDvrJELSgRDznzgqoAsDx/N6dh2jXrsIzEg/yPVQccgK
 0v0mB+FdHjtvPX8hGh/YO+G5oaYQQEQkQB2+Q/5WJBivrRboNPM6tKKj8eJjbXAN
 g/ssE0Wug+11dl2fNuuI98XCCzZng+Pj7RDGO+H54aR7o+i0HruMpEnZOZwClm1R
 3rg8RrqBd9oD0tsLKve7TFKmG9ZvIDZZI6rIgZ+RIfcjrRRrY+N0/wmZnkCJPPJH
 oTatUTBh5crgh22qcySIxz75oO3UJa6Ch12zx2kJjJKaMeV29UUwu4i11XXbowVK
 bO3e296/BK3oExpFvmR73UtseeAb0CmQKvwiotNAr3jYE4YZH2taDLrcqnpTZXoP
 0s+ao5kyT0iq1bJDZW7eds4KUOmDLhBY/sDfHVd+7qJHsfXpU4UOkyWz6qqw2GJ3
 MkxLx3SJ+NFRTRL8oSPoab4cM1F+9qeC3SGqXjfjnQNb9DwXp+syvR18VcdHYQhx
 /Dp3TWELf5nXZiTkLgVm
 =raOr
 -----END PGP SIGNATURE-----

Merge tag 'sti-dt-for-v4.17-round1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt

Pull "STi dts update" from Patrice Chotard:

Fix all DT dtc warnings when building with W=1
For most of implicated node, the addition of a fake reg property
fixes these warnings.
For others nodes, their location in device tree
have been updated.

* tag 'sti-dt-for-v4.17-round1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: STi: Remove unused clk_ext2f_a9 clock
  ARM: dts: STi: Update clocks node location
  ARM: dts: STi: Update sound related nodes location
  ARM: dts: STi: Add fake reg property for usb2_picophyX nodes
  ARM: dts: STi: Add fake reg for restart, powerdown and picophy/softreset
  ARM: dts: STi: Add fake reg property for remote processors
  ARM: dts: STi: Add fake reg property for irq-syscfg
  ARM: dts: STi: Add fake reg property for miphy28lp_phy
  ARM: dts: STi: Add fake reg property for sti-display-subsystem
  ARM: dts: STi: Move leds node outside soc node
  ARM: dts: STi: Fix bindings notation
2018-03-07 15:20:26 +01:00
Hans de Goede
c22969d70f
ASoC: Intel: bytcr_rt5651: Select RCCLK on init()
When the BYT_RT5651_MCLK_EN quirk is set, we disable the MCLK from
byt_rt5651_init(), we need to select the RCCLK as sysclk before doing this
to make sure that jack-detect works directly after boot.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:19:51 +00:00
Hans de Goede
b4b6377e07
ASoC: Intel: bytcr_rt5651: Change defaults to enable jack-detect, analog mics
Change the default quirk settings to enable jack-detect, analog mics.

The old default input mapping of DMIC for non Bay Trail CR devices seems
like a poor default as I'm not aware of any Intel SST + rt5651 using
devices with a DMIC.

All Cherry Trail devices using the bytcr_rt5651 machine driver seem to be
modelled after BYT-CR devices, And the only non CR Bay Trail devices with
a rt5651 codec I'm aware of are the Minnow boards for which we already have
board specific quirks. So it seems better to me to use the BYT-CR defaults
everywhere.

This e.g. makes the Chuwi Hi8 Pro (CWI513) work ootb without needing a
quirk.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:19:47 +00:00
Hans de Goede
f9877eb598
ASoC: Intel: bytcr_rt5651: Add quirk for the VIOS LTH17 laptop
Add a quirk setting up jack-detect and input routing for the
VIOS LTH17 laptop.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:19:40 +00:00
Hans de Goede
8a880a2014
ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards
Despite its name being prefixed with bytcr, before this commit the
bytcr_rt5651 machine driver could not work with Bay Trail CR boards,
as those only have SSP0 and it only supported SSP0-AIF1 setups.

This commit adds support for this, autodetecting AIF1 vs AIF2 based on
BIOS tables.

While at it also add support for SSP2-AIF2 setups, as that requires only
minimal extra code on top of the code adding SSP0-AIF1 / SSP0-AIF2 support.

Note this code is all copy-pasted from bytcr_rt5640.c. I've looked into
merging the 2 machine drivers into 1 to avoid copy-pasting, but there are
enough subtile differences to make this hard *and* with all the quirks the
machine driver already is full with if (variant-foo) then ... else ...
constructs adding more of these is going to make the code unreadable.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:19:22 +00:00
Hans de Goede
f026e06317
ASoC: Intel: bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it
Add a new IN2_HS_IN3 input map and add a quirk for the input mapping and
jack-detect source for the Chuwi Vi8 Plus tablet, which uses this new map.

Note the Chuwi Vi8 Plus lists an extra GPIO in its codecs ACPI resources
which needs to be driven high to enable the external speaker amplifier,
this is not supported yet and will be fixed in a future patch.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:19:00 +00:00
Hans de Goede
7f2e2299cf
ASoC: Intel: bytcr_rt5651: Rename IN3_MAP to IN1_HS_IN3_MAP
All the mappings are named for where the internal mic is routed and in that
sense the newly added in3_map really is the same as in1_map, what makes it
different is that it maps the headset mic at IN3 rather then at IN2.

Rename in3_map to in1_hs_in3_map to better reflect what it actually does.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:18:44 +00:00
Hans de Goede
3fdae070e6
ASoC: Intel: bytcr_rt5651: Drop snd_soc_dai_set_bclk_ratio() call
Drop the snd_soc_dai_set_bclk_ratio() call, the rt5651 dai does not have a
set_bclk_ratio() op, so it is a nop (and returns -EINVAL).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:18:24 +00:00
Hans de Goede
aeec6cc082
ASoC: Intel: bytcr_rt5651: Configure PLL1 before using it
When platform_clock_control() first selects PLL1 as sysclk the PLL_CTRL
registers have not been setup yet and we effectively have an invalid clock
configuration until byt_rt5651_aif1_hw_params() gets called.

Add a new byt_rt5651_prepare_and_enable_pll1() helper and use that from
both platform_clock_control() and byt_rt5651_aif1_hw_params() to fix this.

Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:18:18 +00:00
Hans de Goede
8ffaa6a136
ASoC: Intel: bytcr_rt5651: Add quirk micbias OVCD configuration
Add support for setting the micbias OVCD limits device-properties through
quirks.

And set the limits for this to 2000uA with a scale-factor of 0.75 for the
KIANO SlimNote 14.2 device, which is the only device on which
jack-detection is currently enabled.

Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:18:13 +00:00
Hans de Goede
aed859a2c7
ASoC: Intel: bytcr_rt5651: Only create jack if we have a jack-detect source
Only create the jack if we have a valid jack-detect source and properly
check the snd_soc_component_set_jack() return value.

Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:18:09 +00:00
Hans de Goede
c2f26938d2
ASoC: Intel: bytcr_rt5651: Actually honor the DMIC_EN quirk if specified
Before this commit it was possible to set the DMIC_EN quirk in the machine
driver, but it would never be passed to the codec driver so it was a nop.

This commit adds code to actually pass the quirk to the codec driver.

Since the DMIC_EN quirk was ignored before, this commit removes it from
the default quirk settings, to avoid this causing an unexpected functional
change. If we really want the DMIC_EN behavior anywhere it should be
specifically enabled by follow up commits.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:17:52 +00:00
Hans de Goede
46058aeb6b
ASoC: Intel: bytcr_rt5651: Pass jack-src info via device-properties
This commit add support for a new BYT_RT5651_JDSRC quirk, sets this
quirk for the KIANO SlimNote 14.2 laptop and uses the new "realtek,
jack-detect-source" property to pass this info to the codec driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:17:29 +00:00
Mark Brown
c9ae06decc
Merge branch 'topic/rt5651' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2018-03-07 14:16:00 +00:00
Fabio Estevam
09f7fcfa72
ASoC: wm8524: Remove unit address
WM8524 does not use I2C nor SPI, hence no 'reg' property is used,
so remove the unit address from the bindings example to conform.

This avoids users getting dtc warnings when they copy the
binding example to a real dts file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-07 14:10:54 +00:00
Takashi Iwai
ea66536ab2 perf tools: Correct title markers for asciidoctor
I've tested to process the perf man pages with asciidoctor that is
picker than asciidoc, and it revealed minor syntax errors in some
documents.  Namely, the title markers aren't aligned with the previous
line, hence asciidoctor didn't recognize as titles.

This patch corrects these markers to be processed properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307105441.28512-1-tiwai@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:26:32 -03:00
Robert Jarzmik
0b8129278f Remove the pxa3xx_nand driver (replaced by marvell_nand).
-----BEGIN PGP SIGNATURE-----
 
 iQI5BAABCAAjBQJamceNHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ
 Ze02AX4ItwAkoxAAtdrbc5so/m0ZgPxVkoPl+d3cO+1KveG+OD4kvydieuKZmfGx
 htfayfAG47GsutoN5yXEeuCh5BLkhGsjaBFPO9RhxZM+dZUPl2s3Dp7H/m5xMkaA
 DrYMZ2AQE+Ll4YUaAFE7CIZ9dOwXjHG4rI2wAPRZ+tjs6okmiTP7luYnn4kGwqbC
 qgEmpjxawWl+LwujJqu4ilz4HLe/1zmE7BxGUeUqhyUXnwfgtVTmZVglMKPambZt
 i5Qqom3NOY2qXXdc/ONsYhdwUwLeR1v5Sz0FJw2vpxKKpXPl18SCmxzVuefOxvix
 n6Z0BnKTt+vSPMAZuGkkvr559/jHNT5EQnN5K7TXzl5V4K84HSUWhXHNi4SwZce+
 ASTgOPJUvq/h0Mwo9nC+c7XUQnZ1FjYOY981gDs8XyM5WdA4TpN4TJmhgzUQX59q
 +Ui+vQ+0FVNIXmqZ+qqxnZ/wRVzlPgCDTLKLl4goZ+u9EU2LXvkeoOz0k1mEQ1Pd
 ehSfFZSdfSKkXxzb52R3JV6ELZ9POh66u2abf35mWIgC+l1gApFWpqIdIb3i/Wko
 ALuaLu3k9SnrZgiEuJy9yQ/qKD6pydyfpM2YgO/XEhtRxDlamLWOMyLmgcA1Z/gM
 oYhr5v3leNu3Dyd3RWLQXFRMe1qmUugmxvvbNyh8BhX9r2PmUhuiTdcFf6U=
 =bovT
 -----END PGP SIGNATURE-----

Merge tag 'nand/pxa3xx-removal' of git://git.infradead.org/linux-mtd into pxa/for-next

Remove the pxa3xx_nand driver (replaced by marvell_nand).
2018-03-07 14:22:29 +01:00
Adrian Hunter
4c4548437c perf auxtrace: Make auxtrace_queues__add_buffer() return buffer_ptr
In preparation for supporting AUX area sampling buffers,
auxtrace_queues__add_buffer() needs to be more generic. To that end, make
it return buffer_ptr instead of the caller.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:27 -03:00
Adrian Hunter
a356a59799 perf auxtrace: Rename some buffer-queuing functions
Rename some buffer-queuing functions in preparation for supporting AUX area
sampling buffers.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:27 -03:00
Adrian Hunter
b818ec613b perf auxtrace: Add missing parameters from kernel-doc comments
Add missing parameters from kernel-doc comments.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Arnaldo Carvalho de Melo
9ea42ba441 perf trace: Support setting cgroups as targets
One can set a cgroup as a default cgroup to be used by all events or
set cgroups with the 'perf stat' and 'perf record' behaviour, i.e.
'-G A' will be the cgroup for events defined so far in the command line.

Here in my main machine, with a kvm instance running a rhel6 guinea pig
I have:

  # ls -la /sys/fs/cgroup/perf_event/ | grep drw
  drwxr-xr-x. 14 root root 360 Mar  6 12:04 ..
  drwxr-xr-x.  3 root root   0 Mar  6 15:05 machine.slice
  #

So I can go ahead and use that cgroup hierarchy, say lets see what
syscalls are being emitted by threads in that 'machine.slice' hierarchy
that are taking more than 100ms:

  # perf trace --duration 100 -G machine.slice
     0.188 (249.850 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
   250.274 (249.743 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
   500.224 (249.755 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
   750.097 (249.934 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  1000.244 (249.780 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  1250.197 (249.796 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  1500.124 (249.859 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  1750.076 (172.900 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
   902.570 (1021.116 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
  1923.825 (305.133 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
  2000.172 (229.002 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
^C  #

If we look inside that cgroup hierarchy we get:

  # ls -la /sys/fs/cgroup/perf_event/machine.slice/ | grep drw
  drwxr-xr-x. 3 root root 0 Mar  6 15:05 .
  drwxr-xr-x. 2 root root 0 Mar  6 16:16 machine-qemu\x2d2\x2drhel6.sandy.scope
  #

There is just one, but lets say there were more and we would want to see
5 seconds worth of syscall summary for the threads in that cgroup:

  # perf trace --summary -G machine.slice/machine-qemu\\x2d2\\x2drhel6.sandy.scope/ -a sleep 5

   Summary of events:

     qemu-system-x86 (23667), 143858 events, 24.2%

     syscall            calls    total       min       avg       max      stddev
                                 (msec)    (msec)    (msec)    (msec)        (%)
     --------------- -------- --------- --------- --------- ---------     ------
     ppoll              28492  4348.631     0.000     0.153    11.616      1.05%
     futex              19661   140.801     0.001     0.007     2.993      3.20%
     read               18440    68.084     0.001     0.004     1.653      4.33%
     ioctl               5387    24.768     0.002     0.005     0.134      1.62%

     CPU 0/KVM (23744), 449455 events, 75.8%

     syscall            calls    total       min       avg       max      stddev
                               (msec)    (msec)    (msec)    (msec)        (%)
     --------------- -------- --------- --------- --------- ---------     ------
     ioctl             148364  3401.812     0.000     0.023    11.801      1.15%
     futex              36131   404.127     0.001     0.011     7.377      2.63%
     writev             29452   339.688     0.003     0.012     1.740      1.36%
     write              11315    45.992     0.001     0.004     0.105      1.10%

  #

See the documentation about how to set more than one cgroup for
different events in the same command line.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-t126jh4occqvu0xdqlcjygex@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Arnaldo Carvalho de Melo
3b5692864d perf cgroup: Make the cgroup name be const char *
The usual thing is for a constructor to allocate space for its members,
not to require that the caller pass a pre-allocated 'name' and then, at
its destructor, to free something not allocated by it.

Fix it by making cgroup__new() to receive a const char pointer, then
allocate cgroup->name that then can continue to be freed at
cgroup__delete(), balancing the alloc/free operations inside the cgroup
struct methods.

This eases calling evlist__findnew_cgroup() from the custom 'perf trace'
cgroup parser, that will only call parse_cgroups() when the '-G cgroup'
is passed on the command line after '-e event' entries, when it'll
behave just like 'perf stat' and 'perf record', i.e. the previous
parse_cgroup() users that mandate that -G only can come after a -e.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4leugnuyqi10t98990o3xi1t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Arnaldo Carvalho de Melo
483322dda0 perf cgroup: Add evlist__add_default_cgroup()
So that tools like 'perf trace' can allow the user to set a cgroup
to be used for all the evsels still without a crgroup setup by
parse_cgroups(), such as the one to use for the syscalls, vfs_getname
and other events involved in strace like syscall tracing.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zf9jjsbj661r3lk6qb7g8j70@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Arnaldo Carvalho de Melo
69239ec81d perf cgroup: Add evlist__findnew_cgroup()
Similar to machine__findnew_thread(), etc, i.e. try to find, get a
refcount if found and return it, otherwise return a new cgroup object.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-im1omevlihhyneiic4nl3g24@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Adrian Hunter
4b5ea3bd67 perf record: Combine some auxtrace initialization into a single function
In preparation for adding AUX area sampling support, combine some
auxtrace initialization into a single function.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Changbin Du
99a3c3a913 perf sched map: Re-annotate shortname if thread comm changed
This is to show the real name of thread that created via fork-exec.  See
below example for shortname *A0*.

$ sudo ./perf sched map
              *A0   80393.050639 secs A0 => perf:22368
          *.   A0   80393.050748 secs .  => swapper:0
           .  *.    80393.050887 secs
      *B0  .   .    80393.052735 secs B0 => rcu_sched:8
      *.   .   .    80393.052743 secs
       .  *C0  .    80393.056264 secs C0 => kworker/2:1H:287
       .  *A0  .    80393.056270 secs
       .  *D0  .    80393.056769 secs D0 => ksoftirqd/2:22
-      .  *A0  .    80393.056804 secs
+      .  *A0  .    80393.056804 secs A0 => pi:22368
       .  *.   .    80393.056854 secs
      *B0  .   .    80393.060727 secs
      ...

Signed-off-by: Changbin Du <changbin.du@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520307457-23668-3-git-send-email-changbin.du@intel.com
[ Optimally pack struct thread_runtime when adding the new bool member ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Changbin Du
8640da9f4f perf sched: Move thread::shortname to thread_runtime
The thread::shortname only used by sched command, so move it to sched
private structure.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520307457-23668-2-git-send-email-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:26 -03:00
Arnaldo Carvalho de Melo
923a0fb332 perf cgroup: Introduce cgroup__new() out of open coded equivalent
To follow the namespacing convention in tools/perf.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jaalyl6bkvvji4r5u8wqw4n4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:25 -03:00
Arnaldo Carvalho de Melo
b80271f76a perf cgroup: Introduce find_cgroup() method
To break down complexity in add_cgroup().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5yqshcf5hm837n7c86u7lhjf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:25 -03:00
Arnaldo Carvalho de Melo
fc9ffb9cf0 perf cgroup: Introduce cgroup__get()
The refcount operation counterpart to cgroup__put(), use it when reusing
a cgroup.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-14ynvrl7y2cz8gyuy5q5v41g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:25 -03:00
Arnaldo Carvalho de Melo
a53b646030 perf cgroup: Rename close_cgroup() to cgroup__put()
It is not really closing the cgroup, but instead dropping a reference
count and if it hits zero, then calling delete, which will, among other
cleanup shores, close the cgroup fd.

So it is really dropping a reference to that cgroup, and the method name
for that is "put", so rename close_cgroup() to cgroup__put() to follow
this naming convention.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-sccxpnd7bgwc1llgokt6fcey@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:25 -03:00
Arnaldo Carvalho de Melo
9450d0d46c perf cgroup: Introduce cgroup__delete()
Just to make this code look more like other places in tools/perf.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j3j72vvn2d5j7tenlghdy195@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:25 -03:00
Arnaldo Carvalho de Melo
3ca32f6959 perf cgroup: Rename 'struct cgroup_sel' to 'struct cgroup'
That name isn't used, is shorter, lets switch to it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-e51yphwgvepd1y4f5fjptmjq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:25 -03:00
Arnaldo Carvalho de Melo
a6adc9bdf5 perf cgroup: Remove misplaced __maybe_unused
The 'opt' parameter in parse_cgroups() _is_ used. The original patch
used '__used' that was even more confusing :-)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 023695d96e ("perf tool: Add cgroup support")
Link: https://lkml.kernel.org/n/tip-4jo2puz0empkoou6bbq460tl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-07 10:22:25 -03:00
Andy Shevchenko
53ad4a78f6 ARM: pxa/raumfeld: use PROPERTY_ENTRY_U32() directly
Instead of using PROPERTY_ENTRY_INTEGER() with explicitly supplied type,
use PROPERTY_ENTRY_U32() dedicated macro.

It will help modify internals of built-in device properties API.

No functional change intended.

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-03-07 14:19:47 +01:00
Igor Grinberg
7a5d9a913f ARM: pxa: ulpi: fix ulpi timeout and slowpath warn
Both cm-x300 and pxa3xx-ulpi use the plain clk_{en,dis}able() API.
With the new clocking framework this results in warnings of type:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:714 clk_core_enable+0x90/0x9c
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc5-cm-x300+ #15
Hardware name: CM-X300 module
[<c001007c>] (unwind_backtrace) from [<c000df94>] (show_stack+0x10/0x14)
[<c000df94>] (show_stack) from [<c00199a8>] (__warn+0xd8/0x100)
[<c00199a8>] (__warn) from [<c0019a0c>] (warn_slowpath_null+0x3c/0x48)
[<c0019a0c>] (warn_slowpath_null) from [<c024e8c0>] (clk_core_enable+0x90/0x9c)
[<c024e8c0>] (clk_core_enable) from [<c024ea54>] (clk_core_enable_lock+0x18/0x2c)
[<c024ea54>] (clk_core_enable_lock) from [<c0016994>] (cm_x300_u2d_init+0x4c/0xe8)
[<c0016994>] (cm_x300_u2d_init) from [<c00163e0>] (pxa3xx_u2d_probe+0xe0/0x244)
[<c00163e0>] (pxa3xx_u2d_probe) from [<c0283de0>] (platform_drv_probe+0x38/0x88)
...
------------[ cut here ]------------
and alike...

And finally, it results in:
------------[ cut here ]------------
pxa310_ulpi_poll: ULPI access timed out!
OTG transceiver init failed
------------[ cut here ]------------

It might be that disabling the warning in kernel config would also do
the job, but IMO a better solution would be to switch to
clk_prepare_enable() and clk_disable_unprepare() APIs.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-03-07 14:19:47 +01:00
Igor Grinberg
69a90f4937 ARM: pxa: cm-x300: remove inline directive
cm_x300_u2d_init() function is only used through its function pointer
that is passed through platform_data structure to the driver.
Therefore it can never be inlined.
Remove the inline directive.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-03-07 14:19:47 +01:00
Igor Grinberg
6d07f1911e ARM: pxa: fix static checker warning in pxa3xx-ulpi
Static checker reports the following warning:

arch/arm/mach-pxa/pxa3xx-ulpi.c:336 pxa3xx_u2d_probe()
warn: did you mean to pass the address of 'u2d'

Fix it by passing the correct pointer.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2018-03-07 14:19:47 +01:00
Daniele Ceraolo Spurio
a89a70a8b5 drm/i915/icl: Gen11 forcewake support
The main difference with previous GENs is that starting from Gen11
each VCS and VECS engine has its own power well, which only exist
if the related engine exists in the HW.
The fallback forcewake request workaround is only needed on gen9
according to the HSDES WA entry (1604254524), so we can go back to using
the simpler fw_domains_get/put functions.

BSpec: 18331

v2: fix fwtable, use array to test shadow tables, create new
    accessors to avoid check on every access (Tvrtko)
v3 (from Paulo): Rebase.
v4:
  - Range 09400-097FF should be FORCEWAKE_ALL (Daniele)
  - Use the BIT macro for forcewake domains (Daniele)
  - Add a comment about the range ordering (Oscar)
  - Updated commit message (Oscar)
v5: Rebased
v6: Use I915_MAX_VCS/VECS (Michal)
v7: translate FORCEWAKE_ALL to available domains
v8: rebase, add clarification on fallback ack in commit message.
v9: fix rebase issue, change check in fw_domains_init from IS_GEN11
    to GEN >= 11
v10: Generate is_genX_shadowed with a macro (Daniele)
     Include gen11_fw_ranges in the selftest (Michel)
v11: Simplify FORCEWAKE_ALL, new line between NEEDS_FORCEWAKEs (Tvrtko)

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-6-mika.kuoppala@linux.intel.com
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2018-03-07 15:07:45 +02:00
Michel Thierry
fd034c77b5 drm/i915/icl: Add Indirect Context Offset for Gen11
v2: rebased to intel_lr_indirect_ctx_offset
v3: rebase, move define to intel_lrc_reg.h

BSpec: 11740
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-5-mika.kuoppala@linux.intel.com
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2018-03-07 15:07:39 +02:00
Thomas Daniel
05f0addd9b drm/i915/icl: Enhanced execution list support
Enhanced Execlists is an upgraded version of execlists which supports
up to 8 ports. The lrcs to be submitted are written to a submit queue
(the ExecLists Submission Queue - ELSQ), which is then loaded on the
HW. When writing to the ELSP register, the lrcs are written cyclically
in the queue from position 0 to position 7. Alternatively, it is
possible to write directly in the individual positions of the queue
using the ELSQC registers. To be able to re-use all the existing code
we're using the latter method and we're currently limiting ourself to
only using 2 elements.

v2: Rebase.
v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio).
v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio)
v5: Reword commit, rename regs to be closer to specs, turn off
    preemption (Daniele), reuse engine->execlists.elsp (Chris)
v6: use has_logical_ring_elsq to differentiate the new paths
v7: add preemption support, rename els to submit_reg (Chris)
v8: save the ctrl register inside the execlists struct, drop CSB
    handling updates (superseded by preempt_complete_status) (Chris)
v9: s/drm_i915_gem_request/i915_request (Mika)
v10: resolved conflict in inject_preempt_context (Mika)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-4-mika.kuoppala@linux.intel.com
2018-03-07 15:07:31 +02:00
Daniele Ceraolo Spurio
ac52da6af8 drm/i915/icl: new context descriptor support
Starting from Gen11 the context descriptor format has been updated in
the HW. The hw_id field has been considerably reduced in size and engine
class and instance fields have been added.

There is a slight name clashing issue because the field that we call
hw_id is actually called SW Context ID in the specs for Gen11+.

With the current size of the hw_id field we can have a maximum of 2k
contexts at any time, but we could use the sw_counter field (which is sw
defined) to increase that because the HW requirement is that
engine_id + sw id + sw_counter is a unique number.
GuC uses a similar method to support more contexts but does its tracking
at lrc level. To avoid doing an implementation that will need to be
reworked once GuC support lands, defer it for now and mark it as TODO.

v2: rebased, add documentation, fix GEN11_ENGINE_INSTANCE_SHIFT
v3: rebased, bring back lost code from i915_gem_context.c
v4: make TODO comment more generic
v5: be consistent with bit ordering, add extra checks (Chris)

Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-3-mika.kuoppala@linux.intel.com
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2018-03-07 15:07:20 +02:00