Commit graph

752,007 commits

Author SHA1 Message Date
Matthew Wilcox
c846d8da56 mlx5: Remove call to ida_pre_get
The mlx5 driver calls ida_pre_get() in a loop for no readily apparent
reason.  The driver uses ida_simple_get() which will call ida_pre_get()
by itself and there's no need to use ida_pre_get() unless using
ida_get_new().

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20 10:46:01 -04:00
Peter Ujfalusi
1b8b7ce130 ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040
The xref_xtal clock is used by twl6040 as mclk. It is needed for the HPPLL
internally.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:35:54 -07:00
Tero Kristo
f0131c6726 ARM: dts: omap5: add fref_xtal_ck support
The clock is directly sourced from sys_clkin, and provides an external
output clock for (typically) TWL6040 chip.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:35:45 -07:00
Tero Kristo
0b75c042b5 ARM: dts: omap5: add support for control module wkup pad config
The pad configuration area under control module wkup has some miscellaneous
config registers, that are not pinmux related. Add a separate area for
these, and add support for syscon / clocks under this new area.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:35:38 -07:00
Tero Kristo
418dbeb618 dt-bindings: omap5: ctrl: Support for control module wkup pad config
The pad configuration area under control module wkup has some miscellaneous
config registers, that are not pinmux related.
Add new compatible string for this section of control module.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:35:28 -07:00
David S. Miller
b5dd0e792f Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:

====================
Here are a few more important Bluetooth driver fixes for the 4.16
kernel.

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20 10:28:09 -04:00
Roger Quadros
54cab61a8a ARM: dts: am43xx: Enable dual-role mode for USB1
USB1 port is micro-AB type and can function as peripheral
as well as host. Enable dual-role mode for USB1.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:26:00 -07:00
Tony Lindgren
372bed66bf ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules
We need the CPCAP MFD and regulator built-in for UART console to work,
the rest can be loadable modules. Note that users probably want to also
enable serial 8250_OMAP that is not yet enabled by default.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:24 -07:00
Tony Lindgren
0b3cbdbafd ARM: omap2plus_defconfig: Add UINPUT
This can be used for keyboard fn keys with funkeymonkey.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:15 -07:00
Tony Lindgren
bca809d818 ARM: omap2plus_defconfig: Enable MDM6600 USB PHY
This allows droid 4 USB modem to work.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:10:07 -07:00
Tony Lindgren
ef0d46d671 ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARD
This is needed for audio on droid 4.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:09:55 -07:00
Tony Lindgren
a62c1cc1bc ARM: omap2plus_defconfig: Enable PWM_VIBRA
We can use PWM_VIBRA on many phones like droid 4.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-20 07:09:46 -07:00
Pablo Neira Ayuso
20710b3b81 netfilter: ctnetlink: synproxy support
This patch exposes synproxy information per-conntrack. Moreover, send
sequence adjustment events once server sends us the SYN,ACK packet, so
we can synchronize the sequence adjustment too for packets going as
reply from the server, as part of the synproxy logic.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 14:39:31 +01:00
Thomas Gleixner
f3f59fbc54 genirq: Remove license boilerplate/references
Now that SPDX identifiers are in place, remove the boilerplate or
references.

The change in timings.c has been acked by the author.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
2018-03-20 14:23:28 +01:00
Thomas Gleixner
52a65ff560 genirq: Add missing SPDX identifiers
Add SPDX identifiers to files

 - which contain an explicit license boiler plate or reference

 - which do not contain a license reference and were not updated in the
   initial SPDX conversion because the license was deduced by the scanners
   via EXPORT_SYMBOL_GPL as GPL2.0 only.

[ tglx: Moved adding identifiers from the patch which removes the
  	references/boilerplate ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
2018-03-20 14:23:28 +01:00
Thomas Gleixner
90cafdd521 genirq/matrix: Cleanup SPDX identifier
Use the proper SPDX-Identifier format.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.492674761@linutronix.de
2018-03-20 14:23:28 +01:00
Thomas Gleixner
99bfce5db9 genirq: Cleanup top of file comments
Remove pointless references to the file name itself and condense the
information so it wastes less space.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
2018-03-20 14:23:27 +01:00
Florian Westphal
ae6153b50f netfilter: nf_tables: permit second nat hook if colliding hook is going away
Sergei Trofimovich reported that restoring an nft ruleset doesn't work
anymore unless old rule content is flushed first.

The problem stems from a recent change designed to prevent multiple nat
hooks at the same hook point locations and nftables transaction model.

A 'flush ruleset' won't take effect until the entire transaction has
completed.

So, if one has a nft.rules file that contains a 'flush ruleset',
followed by a nat hook register request, then 'nft -f file' will work,
but running 'nft -f file' again will fail with -EBUSY.

Reason is that nftables will place the flush/removal requests in the
transaction list, but it will not act on the removal until after all new
rules are in place.

The netfilter core will therefore get request to register a new nat
hook before the old one is removed -- this now fails as the netfilter
core can't know the existing hook is staged for removal.

To fix this, we can search the transaction log when a hook collision
is detected.  The collision is okay if

 1. there is a delete request pending for the nat hook that is already
    registered.
 2. there is no second add request for a matching nat hook.
    This is required to only apply the exception once.

Fixes: f92b40a8b2 ("netfilter: core: only allow one nat hook per hook point")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:55:03 +01:00
Florian Westphal
4f2921ca21 netfilter: nf_tables: meter: pick a set backend that supports updates
in nftables, 'meter' can be used to instantiate a hash-table at run
time:

rule add filter forward iif "internal" meter hostacct { ip saddr counter}
nft list meter ip filter hostacct
table ip filter {
  meter hostacct {
    type ipv4_addr
    elements = { 192.168.0.1 : counter packets 8 bytes 2672, ..

because elemets get added on the fly, the kernel must chose a set
backend type that implements the ->update() function, otherwise
rule insertion fails with EOPNOTSUPP.

Therefore, skip set types that lack ->update, and also
make sure we do not discard a (bad) candidate when we did yet
find any candidate at all.  This could happen when userspace prefers
low memory footprint -- the set implementation currently checked might
not be a fit at all.  Make sure we pick it anyway (!bops).  In
case next candidate is a better fix, it will be chosen instead.

But in case nothing else is found we at least have a non-ideal
match rather than no match at all.

Fixes: 6c03ae210c ("netfilter: nft_set_hash: add non-resizable hashtable implementation")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:52:10 +01:00
Arushi Singhal
5191d70f83 netfilter: Replace printk() with pr_*() and define pr_fmt()
Using pr_<loglevel>() is more concise than printk(KERN_<LOGLEVEL>).
This patch:
* Replace printks having a log level with the appropriate
pr_*() macros.
* Define pr_fmt() to include relevant name.
* Remove redundant prefixes from pr_*() calls.
* Indent the code where possible.
* Remove the useless output messages.
* Remove periods from messages.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:44:14 +01:00
Jack Ma
472a73e007 netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.
This patch introduces a new feature that allows bitshifting (left
and right) operations to co-operate with existing iptables options.

Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jack Ma <jack.ma@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:41:41 +01:00
Taehee Yoo
d72133e628 netfilter: ebtables: use ADD_COUNTER macro
xtables uses ADD_COUNTER macro to increase
packet and byte count. ebtables also can use this.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:41:40 +01:00
Gustavo A. R. Silva
5b4c6e3860 netfilter: nf_tables: remove VLA usage
In preparation to enabling -Wvla, remove VLA and replace it
with dynamic memory allocation.

>From a security viewpoint, the use of Variable Length Arrays can be
a vector for stack overflow attacks. Also, in general, as the code
evolves it is easy to lose track of how big a VLA can get. Thus, we
can end up having segfaults that are hard to debug.

Also, fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:41:39 +01:00
Gustavo A. R. Silva
1446385904 netfilter: nfnetlink_cthelper: Remove VLA usage
In preparation to enabling -Wvla, remove VLA and replace it
with dynamic memory allocation.

>From a security viewpoint, the use of Variable Length Arrays can be
a vector for stack overflow attacks. Also, in general, as the code
evolves it is easy to lose track of how big a VLA can get. Thus, we
can end up having segfaults that are hard to debug.

Also, fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:41:38 +01:00
Gustavo A. R. Silva
8039ab43ee netfilter: cttimeout: remove VLA usage
In preparation to enabling -Wvla, remove VLA and replace it
with dynamic memory allocation.

>From a security viewpoint, the use of Variable Length Arrays can be
a vector for stack overflow attacks. Also, in general, as the code
evolves it is easy to lose track of how big a VLA can get. Thus, we
can end up having segfaults that are hard to debug.

Also, fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621

While at it, remove likely() notation which is not necessary from the
control plane code.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:41:04 +01:00
Pablo Neira Ayuso
d719e3f21c netfilter: nft_ct: add NFT_CT_{SRC,DST}_{IP,IP6}
All existing keys, except the NFT_CT_SRC and NFT_CT_DST are assumed to
have strict datatypes. This is causing problems with sets and
concatenations given the specific length of these keys is not known.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Florian Westphal <fw@strlen.de>
2018-03-20 13:27:19 +01:00
Yi-Hung Wei
35d8deb80c netfilter: conncount: Support count only use case
Currently, nf_conncount_count() counts the number of connections that
matches key and inserts a conntrack 'tuple' with the same key into the
accounting data structure.  This patch supports another use case that only
counts the number of connections where 'tuple' is not provided.  Therefore,
proper changes are made on nf_conncount_count() to support the case where
'tuple' is NULL.  This could be useful for querying statistics or
debugging purpose.

Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:27:18 +01:00
Yi-Hung Wei
6aec208786 netfilter: Refactor nf_conncount
Remove parameter 'family' in nf_conncount_count() and count_tree().
It is because the parameter is not useful after commit 625c556118
("netfilter: connlimit: split xt_connlimit into front and backend").

Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20 13:27:17 +01:00
Anders Roxell
b5e817dcdd firmware: arm_scmi: prevent accessing rate_discrete uninitialized
gcc-5.3 and earlier warns that rate_discrete maybe-uninitialized
    ../drivers/firmware/arm_scmi/clock.c:185:5: warning: 'rate_discrete'
        may be used uninitialized in this function [-Wmaybe-uninitialized]
      if (rate_discrete)
         ^
    ../drivers/firmware/arm_scmi/clock.c:128:7: note:
        'rate_discrete' was declared here
      bool rate_discrete;
           ^
This patch fixing the warning by initialising rate_discrete and also using
goto label for the error path.

Fixes: 5f6c6430e9 ("firmware: arm_scmi: add initial support for clock protocol")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[sudeep.holla: added one line description to the commit message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-03-20 12:20:27 +00:00
Sudeep Holla
c09880cef7 hwmon: (scmi) return -EINVAL when sensor information is unavailable
Passing NULL pointer to PTR_ERR will result in return value of 0
indicating success which is clearly not what it is intended here.

This patch returns -EINVAL instead when the sensor information is not
available.

Fixes: b23688aefb ("hwmon: add support for sensors exported via ARM SCMI")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-03-20 12:13:48 +00:00
Daniel Gimpelevich
e3cb7bde9a USB: misc: uss720: more vendor/product ID's
Reporting two more VID/PID pairs that work with this driver, having used
an informational webpage <http://reboots.g-cipher.net/lcd/> as a buying
guide now. The page listed additional working VID/PID pairs but did not
include these two. None were upstreamed. Also taking this opportunity to
sort the pairs numerically.

Of the two such cables now in my possession, one is white, bearing the
In-System Design ISD-103 label on one side, sold as an Epson CAEUL0002
"USB to Parallel Smart Cable For Apple Macintosh Computers" (04b8:0002),
and the other is black, bearing the In-System Design ISD-101 label on one
side, sold as an early Belkin F5U002 (05ab:0002).

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20 12:27:34 +01:00
Viresh Kumar
a8b6966034 cpufreq: tegra186: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from tegra186 driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:53 +01:00
Viresh Kumar
2d28b03686 cpufreq: speedstep: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from speedstep driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
31f4b7a86b cpufreq: sparc: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from sparc driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
ec8d2cc62c cpufreq: sh: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from sh-cpufreq driver.

The driver though prints the min/max frequency values and the same is
done from the ->ready() callback now to keep the behavior unchanged.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
54a277ebf2 cpufreq: sfi: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from sfi driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
472ada6021 cpufreq: scpi: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from scpi driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
f35750c885 cpufreq: sc520: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from sc520 driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
09e390f30f cpufreq: s3c24xx: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from s3c24xx driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
5ab508bebf cpufreq: qoirq: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from qoirq driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
8ed5a219d0 cpufreq: pxa: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from pxa driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
20dfdb9c80 cpufreq: ppc_cbe: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from ppc_cbe driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
e2376d1fa0 cpufreq: powernow: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from powernow driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
b01b531f67 cpufreq: p4-clockmod: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from p4-clockmod driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
b563afbaa8 cpufreq: mediatek: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from mediatek driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
2c65616b98 cpufreq: longhaul: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from longhaul driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
b6663622a3 cpufreq: ia64-acpi: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from ia64-acpi driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
c3e3cc8aa3 cpufreq: elanfreq: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from elanfreq driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
0d10539445 cpufreq: e_powersaver: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from e_powersaver driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00
Viresh Kumar
29aa18a762 cpufreq: cpufreq-dt: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from cpufreq-dt driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-20 12:07:52 +01:00