Commit graph

131,090 commits

Author SHA1 Message Date
Jedrzej Jagielski
affead2d90 ixgbe: add support for thermal sensor event reception
E610 NICs unlike the previous devices utilising ixgbe driver
are notified in the case of overheating by the FW ACI event.

In event of overheat when threshold is exceeded, FW suspends all
traffic and sends overtemp event to the driver. Then driver
logs appropriate message and disables the adapter instance.
The card remains in that state until the platform is rebooted.

This approach is a solution to the fact current version of the
E610 FW doesn't support reading thermal sensor data by the
SW. So give to user at least any info that overtemp event
has occurred, without interface disappearing from the OS
without any note.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Jeremiah Lokan <jeremiahx.j.lokan@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-7-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 10:15:50 +01:00
Piotr Kwapulinski
18a9b8e358 ixgbe: add PTP support for E610 device
Add PTP support for E610 adapter. The E610 is based on X550 and adds
firmware managed link, enhanced security capabilities and support for
updated server manageability. It does not introduce any new PTP features
compared to X550.

Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-6-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 10:15:49 +01:00
Karol Kolacinski
50f4ffac91 ice: E825C PHY register cleanup
Minor PTP register refactor, including logical grouping E825C 1-step
timestamping registers. Remove unused register definitions
(PHY_REG_GPCS_BITSLIP, PHY_REG_REVISION).
Also, apply preferred GENMASK macro (instead of ICE_M) for register
fields definition affected by this patch.

Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-5-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 10:15:49 +01:00
Karol Kolacinski
66a1b7e09f ice: Refactor E825C PHY registers info struct
Simplify ice_phy_reg_info_eth56g struct definition to include base
address for the very first quad. Use base address info and 'step'
value to determine address for specific PHY quad.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-4-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 10:15:49 +01:00
Karol Kolacinski
178edd2633 ice: rename ice_ptp_init_phc_eth56g function
Refactor the code by changing ice_ptp_init_phc_eth56g function
name to ice_ptp_init_phc_e825, to be consistent with the naming pattern
for other devices.

Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-3-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 10:15:49 +01:00
Paul Greenwalt
905d1a220e ice: Add E830 checksum offload support
E830 supports raw receive and generic transmit checksum offloads.

Raw receive checksum support is provided by hardware calculating the
checksum over the whole packet, regardless of type. The calculated
checksum is provided to driver in the Rx flex descriptor. Then the driver
assigns the checksum to skb->csum and sets skb->ip_summed to
CHECKSUM_COMPLETE.

Generic transmit checksum support is provided by hardware calculating the
checksum given two offsets: the start offset to begin checksum calculation,
and the offset to insert the calculated checksum in the packet. Support is
advertised to the stack using NETIF_F_HW_CSUM feature.

E830 has the following limitations when both generic transmit checksum
offload and TCP Segmentation Offload (TSO) are enabled:

1. Inner packet header modification is not supported. This restriction
   includes the inability to alter TCP flags, such as the push flag. As a
   result, this limitation can impact the receiver's ability to coalesce
   packets, potentially degrading network throughput.
2. The Maximum Segment Size (MSS) is limited to 1023 bytes, which prevents
   support of Maximum Transmission Unit (MTU) greater than 1063 bytes.

Therefore NETIF_F_HW_CSUM and NETIF_F_ALL_TSO features are mutually
exclusive. NETIF_F_HW_CSUM hardware feature support is indicated but is not
enabled by default. Instead, IP checksums and NETIF_F_ALL_TSO are the
defaults. Enforcement of mutual exclusivity of NETIF_F_HW_CSUM and
NETIF_F_ALL_TSO is done in ice_set_features(). Mutual exclusivity
of IP checksums and NETIF_F_HW_CSUM is handled by netdev_fix_features().

When NETIF_F_HW_CSUM is requested the provided skb->csum_start and
skb->csum_offset are passed to hardware in the Tx context descriptor
generic checksum (GCS) parameters. Hardware calculates the 1's complement
from skb->csum_start to the end of the packet, and inserts the result in
the packet at skb->csum_offset.

Co-developed-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Co-developed-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-2-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 10:15:49 +01:00
Maxime Chevallier
3bd87f3b44 net: phylink: Use phy_caps to get an interface's capabilities and modes
Phylink has internal code to get the MAC capabilities of a given PHY
interface (what are the supported speed and duplex).

Extract that into phy_caps, but use the link_capa for conversion. Add an
internal phylink helper for the link caps -> mac caps conversion, and
use this in phylink_caps_to_linkmodes().

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-14-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:12 +01:00
Maxime Chevallier
4ca5b8a258 net: phylink: Convert capabilities to linkmodes using phy_caps
phylink_caps_to_linkmodes() is used to derive a list of linkmodes that
can be conceivably exposed using a given set of speeds and duplex
through phylink's MAC capabilities.

This list can be derived from the link_caps array in phy_caps, provided
we convert the MAC capabilities into a LINK_CAPA bitmask first.

Introduce an internal phylink helper phylink_caps_to_link_caps() to
convert from MAC capabilities into phy_caps, then  phy_caps_linkmodes()
to do the link_caps -> linkmodes conversion.

This avoids having to update phylink for every new linkmode.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-13-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:12 +01:00
Maxime Chevallier
3bea75002a net: phylink: Add a mapping between MAC_CAPS and LINK_CAPS
phylink allows MAC drivers to report the capabilities in terms of speed,
duplex and pause support. This is done through a dedicated set of enum
values in the form of the MAC_ capabilities. They are very close to what
the LINK_CAPA_xxx can express, with the difference that LINK_CAPA don't
have any information about Pause/Asym Pause support.

To prepare converting phylink to using the phy_caps, add the mapping
between MAC capabilities and phy_caps. While doing so, we move the
phylink_caps_params array up a bit to simplify future commits.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-12-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:12 +01:00
Maxime Chevallier
ce60fef7fe net: phy: drop phy_settings and the associated lookup helpers
The phy_settings array is no longer relevant as it has now been replaced
by the link_caps array and associated phy_caps helpers.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-11-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
de7d3f87be net: phylink: Use phy_caps_lookup for fixed-link configuration
When phylink creates a fixed-link configuration, it finds a matching
linkmode to set as the advertised, lp_advertising and supported modes
based on the speed and duplex of the fixed link.

Use the newly introduced phy_caps_lookup to get these modes instead of
phy_lookup_settings(). This has the side effect that the matched
settings and configured linkmodes may now contain several linkmodes (the
intersection of supported linkmodes from the phylink settings and the
linkmodes that match speed/duplex) instead of the one from
phy_lookup_settings().

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-10-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
c7ae89c6b4 net: phy: phy_device: Use link_capabilities lookup for PHY aneg config
When configuring PHY advertising with autoneg disabled, we lookd for an
exact linkmode to advertise and configure for the requested Speed and
Duplex, specially at or over 1G.

Using phy_caps_lookup allows us to build a list of the supported
linkmodes at that speed that we can advertise instead of the first mode
that matches.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-9-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
fc81e257d1 net: phy: phy_caps: Allow looking-up link caps based on speed and duplex
As the link_caps array is efficient for <speed,duplex> lookups,
implement a function for speed/duplex lookups that matches a given
mask. This replicates to some extent the phy_lookup_settings()
behaviour, matching full link_capabilities instead of a single linkmode.

phy.c's phy_santize_settings() and phylink's
phylink_ethtool_ksettings_set() performs such lookup using the
phy_settings table, but are only interested in the actual speed/duplex
that were matched, rathet than the individual linkmode.

Similar to phy_lookup_settings(), the newly introduced phy_caps_lookup()
will run through the link_caps[] array by descending speed/duplex order.

If the link_capabilities for a given <speed/duplex> tuple intersects the
passed linkmodes, we consider that a match.

Similar to phy_lookup_settings(), we also allow passing an 'exact'
boolean, allowing non-exact match. Here, we MUST always match the
linkmodes mask, but we allow matching on lower speed settings.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-8-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
dbcd85b05c net: phy: phy_caps: Implement link_capabilities lookup by linkmode
In several occasions, phylib needs to lookup a set of matching speed and
duplex against a given linkmode set. Instead of relying on the
phy_settings array and thus iterate over the whole linkmodes list, use
the link_capabilities array to lookup these matches, as we aren't
interested in the actual link setting that matches but rather the speed
and duplex for that setting.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-7-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
87b22ce312 net: phy: phy_caps: Introduce phy_caps_valid
With the link_capabilities array, it's trivial to validate a given mask
againts a <speed, duplex> tuple. Create a helper for that purpose, and
use it to replace a phy_settings lookup in phy_check_valid();

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-6-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
4823ed0609 net: phy: phy_caps: Move __set_linkmode_max_speed to phy_caps
Convert the __set_linkmode_max_speed to use the link_capabilities array.
This makes it easy to clamp the linkmodes to a given max speed.
Introduce a new helper phy_caps_linkmode_max_speed to replace the
previous one that used phy_settings.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-5-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
8c8c4a8793 net: phy: phy_caps: Move phy_speeds to phy_caps
Use the newly introduced link_capabilities array to derive the list of
possible speeds when given a combination of linkmodes. As
link_capabilities is indexed by speed, we don't have to iterate the
whole phy_settings array.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-4-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
d8c838a57c net: phy: Use an internal, searchable storage for the linkmodes
The canonical definition for all the link modes is in linux/ethtool.h,
which is complemented by the link_mode_params array stored in
net/ethtool/common.h . That array contains all the metadata about each
of these modes, including the Speed and Duplex information.

Phylib and phylink needs that information as well for internal
management of the link, which was done by duplicating that information
in locally-stored arrays and lookup functions. This makes it easy for
developpers adding new modes to forget modifying phylib and phylink
accordingly.

However, the link_mode_params array in net/ethtool/common.c is fairly
inefficient to search through, as it isn't sorted in any manner. Phylib
and phylink perform a lot of lookup operations, mostly to filter modes
by speed and/or duplex.

We therefore introduce the link_caps private array in phy_caps.c, that
indexes linkmodes in a more efficient manner. Each element associated a
tuple <speed, duplex> to a bitfield of all the linkmodes runs at these
speed/duplex.

We end-up with an array that's fairly short, easily addressable and that
it optimised for the typical use-cases of phylib/phylink.

That array is initialized at the same time as phylib. As the
link_mode_params array is part of the net stack, which phylink depends
on, it should always be accessible from phylib.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Russell King (Oracle)
39b0a10d80 net: stmmac: remove unnecessary stmmac_mac_set() in stmmac_release()
stmmac_release() calls phylink_stop() and then goes on to call
stmmac_mac_set(, false). However, phylink_stop() will call
stmmac_mac_link_down() before returning, which will do this work.
Remove this unnecessary call.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1trcI6-005rn8-GV@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 21:36:20 +01:00
Russell King (Oracle)
180fa8d0a2 net: stmmac: remove redundant racy tear-down in stmmac_dvr_remove()
While the network device is registered, it is published to userspace,
and thus userspace can change its state. This means calling
functions such as stmmac_stop_all_dma() and stmmac_mac_set() are
racy.

Moreover, unregister_netdev() will unpublish the network device, and
then if appropriate call the .ndo_stop() method, which is
stmmac_release(). This will first call phylink_stop() which will
synchronously take the link down, resulting in stmmac_mac_link_down()
and stmmac_mac_set(, false) being called.

stmmac_release() will also call stmmac_stop_all_dma().

Consequently, neither of these two functions need to called prior
to unregister_netdev() as that will safely call paths that will
result in this work being done if necessary.

Remove these redundant racy calls.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1trcI1-005rn2-CZ@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 21:36:20 +01:00
Philipp Hahn
a07f23ad9b cdc_ether|r8152: ThinkPad Hybrid USB-C/A Dock quirk
Lenovo ThinkPad Hybrid USB-C with USB-A Dock (17ef:a359) is affected by
the same problem as the Lenovo Powered USB-C Travel Hub (17ef:721e):
Both are based on the Realtek RTL8153B chip used to use the cdc_ether
driver. However, using this driver, with the system suspended the device
constantly sends pause-frames as soon as the receive buffer fills up.
This causes issues with other devices, where some Ethernet switches stop
forwarding packets altogether.

Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.

Cc: Leon Schuermann <leon@is.currently.online>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org> (maintainer:USB CDC ETHERNET DRIVER)
Cc: netdev@vger.kernel.org (open list:NETWORKING DRIVERS)
Link: https://git.kernel.org/netdev/net/c/cb82a54904a9
Link: https://git.kernel.org/netdev/net/c/2284bbd0cf39
Link: https://www.lenovo.com/de/de/p/accessories-and-software/docking/docking-usb-docks/40af0135eu
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/484336aad52d14ccf061b535bc19ef6396ef5120.1741601523.git.p.hahn@avm.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 21:25:25 +01:00
Choong Yong Liang
38f13bf801 stmmac: intel: Fix warning message for return value in intel_tsn_lane_is_available()
Fix the warning "warn: missing error code? 'ret'" in the
intel_tsn_lane_is_available() function.

The function now returns 0 to indicate that a TSN lane was found and
returns -EINVAL when it is not found.

Fixes: a42f6b3f1c ("net: stmmac: configure SerDes according to the interface mode")
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250310050835.808870-1-yong.liang.choong@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 21:09:22 +01:00
Heiner Kallweit
8ea221b221 net: phy: remove unused functions phy_package_[read|write]_mmd
These functions have never had a user, so remove them.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5792e2cd-6f0a-4f7d-a5ef-b932f94d82f3@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 19:07:54 +01:00
Heiner Kallweit
43e2aa56ae net: phy: move PHY package MMD access function declarations from phy.h to phylib.h
These functions are used by PHY drivers only, therefore move their
declaration to phylib.h.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/406c8a20-b62e-4ee3-b174-b566724a0876@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 19:07:54 +01:00
Moshe Shemesh
32e658c84b net/mlx5: fs, add support for dest flow sampler HWS action
Add support for HW Steering action of flow sampler destination. For each
flow sampler created cache the hws action by sampler id as a key. Hold
refcount for each rule using the cached action.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1741543663-22123-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 18:57:17 +01:00
Moshe Shemesh
82d3639ef7 net/mlx5: fs, add support for flow meters HWS action
Add support for HW Steering action of flow meter range. Flow meters
range can use one HWS action for the whole range. Thus, share a cached
HWS action among rules that use same flow meter object range. Hold
refcount for each rule using the cached action.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1741543663-22123-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 18:57:17 +01:00
Moshe Shemesh
cc2cc56fc6 net/mlx5: fs, add API for sharing HWS action by refcount
Counters HWS actions are shared using refcount, to create action on
demand by flow steering rule and destroy only when no rules are using
the action. The method is extensible to other HWS action types, such as
flow meter and sampler actions, in the downstream patches.

Add an API to facilitate the reuse of get/put logic for HWS actions
shared by refcount.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1741543663-22123-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-17 18:57:17 +01:00
Paolo Abeni
941defcea7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.14-rc6).

Conflicts:

tools/testing/selftests/drivers/net/ping.py
  75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
  de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/

net/core/devmem.c
  a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
  1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/

Adjacent changes:

tools/testing/selftests/net/Makefile
  6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
  2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")

drivers/net/ethernet/broadcom/bnxt/bnxt.c
  661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
  fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 23:08:11 +01:00
Shradha Gupta
3e64bb2ae7 net: mana: cleanup mana struct after debugfs_remove()
When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(),
mana_gd_suspend() and mana_gd_resume() are called. If during this
mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs
pointer does not get reinitialized and ends up pointing to older,
cleaned-up dentry.
Further in the hibernation path, as part of power_down(), mana_gd_shutdown()
is triggered. This call, unaware of the failures in resume, tries to cleanup
the already cleaned up  mana_port_debugfs value and hits the following bug:

[  191.359296] mana 7870:00:00.0: Shutdown was called
[  191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098
[  191.360584] #PF: supervisor write access in kernel mode
[  191.361125] #PF: error_code(0x0002) - not-present page
[  191.361727] PGD 1080ea067 P4D 0
[  191.362172] Oops: Oops: 0002 [#1] SMP NOPTI
[  191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2
[  191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024
[  191.364124] RIP: 0010:down_write+0x19/0x50
[  191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d
[  191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246
[  191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000
[  191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098
[  191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001
[  191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000
[  191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020
[  191.369549] FS:  00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000
[  191.370213] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0
[  191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[  191.372906] Call Trace:
[  191.373262]  <TASK>
[  191.373621]  ? show_regs+0x64/0x70
[  191.374040]  ? __die+0x24/0x70
[  191.374468]  ? page_fault_oops+0x290/0x5b0
[  191.374875]  ? do_user_addr_fault+0x448/0x800
[  191.375357]  ? exc_page_fault+0x7a/0x160
[  191.375971]  ? asm_exc_page_fault+0x27/0x30
[  191.376416]  ? down_write+0x19/0x50
[  191.376832]  ? down_write+0x12/0x50
[  191.377232]  simple_recursive_removal+0x4a/0x2a0
[  191.377679]  ? __pfx_remove_one+0x10/0x10
[  191.378088]  debugfs_remove+0x44/0x70
[  191.378530]  mana_detach+0x17c/0x4f0
[  191.378950]  ? __flush_work+0x1e2/0x3b0
[  191.379362]  ? __cond_resched+0x1a/0x50
[  191.379787]  mana_remove+0xf2/0x1a0
[  191.380193]  mana_gd_shutdown+0x3b/0x70
[  191.380642]  pci_device_shutdown+0x3a/0x80
[  191.381063]  device_shutdown+0x13e/0x230
[  191.381480]  kernel_power_off+0x35/0x80
[  191.381890]  hibernate+0x3c6/0x470
[  191.382312]  state_store+0xcb/0xd0
[  191.382734]  kobj_attr_store+0x12/0x30
[  191.383211]  sysfs_kf_write+0x3e/0x50
[  191.383640]  kernfs_fop_write_iter+0x140/0x1d0
[  191.384106]  vfs_write+0x271/0x440
[  191.384521]  ksys_write+0x72/0xf0
[  191.384924]  __x64_sys_write+0x19/0x20
[  191.385313]  x64_sys_call+0x2b0/0x20b0
[  191.385736]  do_syscall_64+0x79/0x150
[  191.386146]  ? __mod_memcg_lruvec_state+0xe7/0x240
[  191.386676]  ? __lruvec_stat_mod_folio+0x79/0xb0
[  191.387124]  ? __pfx_lru_add+0x10/0x10
[  191.387515]  ? queued_spin_unlock+0x9/0x10
[  191.387937]  ? do_anonymous_page+0x33c/0xa00
[  191.388374]  ? __handle_mm_fault+0xcf3/0x1210
[  191.388805]  ? __count_memcg_events+0xbe/0x180
[  191.389235]  ? handle_mm_fault+0xae/0x300
[  191.389588]  ? do_user_addr_fault+0x559/0x800
[  191.390027]  ? irqentry_exit_to_user_mode+0x43/0x230
[  191.390525]  ? irqentry_exit+0x1d/0x30
[  191.390879]  ? exc_page_fault+0x86/0x160
[  191.391235]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  191.391745] RIP: 0033:0x7dbc4ff1c574
[  191.392111] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
[  191.393412] RSP: 002b:00007ffd95a23ab8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  191.393990] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007dbc4ff1c574
[  191.394594] RDX: 0000000000000005 RSI: 00005a6eeadb0ce0 RDI: 0000000000000001
[  191.395215] RBP: 00007ffd95a23ae0 R08: 00007dbc50003b20 R09: 0000000000000000
[  191.395805] R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000000005
[  191.396404] R13: 00005a6eeadb0ce0 R14: 00007dbc500045c0 R15: 00007dbc50001ee0
[  191.396987]  </TASK>

To fix this, we explicitly set such mana debugfs variables to NULL after
debugfs_remove() is called.

Fixes: 6607c17c6c ("net: mana: Enable debugfs files for MANA device")
Cc: stable@vger.kernel.org
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/1741688260-28922-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:26:35 +01:00
Carolina Jubran
e92df790d0 net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
mlx5_eswitch_get_vepa returns -EPERM if the device lacks
eswitch_manager capability, blocking mlx5e_bridge_getlink from
retrieving VEPA mode. Since mlx5e_bridge_getlink implements
ndo_bridge_getlink, returning -EPERM causes bridge link show to fail
instead of skipping devices without this capability.

To avoid this, return -EOPNOTSUPP from mlx5e_bridge_getlink when
mlx5_eswitch_get_vepa fails, ensuring the command continues processing
other devices while ignoring those without the necessary capability.

Fixes: 4b89251de0 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:15 +01:00
Jianbo Liu
4b8eeed4fb net/mlx5: Bridge, fix the crash caused by LAG state check
When removing LAG device from bridge, NETDEV_CHANGEUPPER event is
triggered. Driver finds the lower devices (PFs) to flush all the
offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns
false if one of PF is unloaded. In such case,
mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of
the alive PF, and the flush is skipped.

Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge
event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be
ignored in this case because the upper interface for bond is deleted,
and the entry will never be aged because lastuse is never updated.

To make things worse, as the entry is alive, mlx5 bridge workqueue
keeps sending that event, which is then handled by kernel bridge
notifier. It causes the following crash when accessing the passed bond
netdev which is already destroyed.

To fix this issue, remove such checks. LAG state is already checked in
commit 15f8f16895 ("net/mlx5: Bridge, verify LAG state when adding
bond to bridge"), driver still need to skip offload if LAG becomes
invalid state after initialization.

 Oops: stack segment: 0000 [#1] SMP
 CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G           OE      6.11.0_mlnx #1
 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core]
 RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge]
 Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7
 RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297
 RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff
 RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0
 RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8
 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60
 R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __die_body+0x1a/0x60
  ? die+0x38/0x60
  ? do_trap+0x10b/0x120
  ? do_error_trap+0x64/0xa0
  ? exc_stack_segment+0x33/0x50
  ? asm_exc_stack_segment+0x22/0x30
  ? br_switchdev_event+0x2c/0x110 [bridge]
  ? sched_balance_newidle.isra.149+0x248/0x390
  notifier_call_chain+0x4b/0xa0
  atomic_notifier_call_chain+0x16/0x20
  mlx5_esw_bridge_update+0xec/0x170 [mlx5_core]
  mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core]
  process_scheduled_works+0x81/0x390
  worker_thread+0x106/0x250
  ? bh_worker+0x110/0x110
  kthread+0xb7/0xe0
  ? kthread_park+0x80/0x80
  ret_from_fork+0x2d/0x50
  ? kthread_park+0x80/0x80
  ret_from_fork_asm+0x11/0x20
  </TASK>

Fixes: ff9b752146 ("net/mlx5: Bridge, support LAG")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Shay Drory
32966984be net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch
Currently, MultiPort E-Switch is requesting to create a LAG with shared
FDB without checking the LAG is supporting shared FDB.
Add the check.

Fixes: a32327a3a0 ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Shay Drory
32d2724db5 net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
mlx5_irq_pool_get() is a getter for completion IRQ pool only.
However, after the cited commit, mlx5_irq_pool_get() is called during
ctrl IRQ release flow to retrieve the pool, resulting in the use of an
incorrect IRQ pool.

Hence, use the newly introduced mlx5_irq_get_pool() getter to retrieve
the correct IRQ pool based on the IRQ itself. While at it, rename
mlx5_irq_pool_get() to mlx5_irq_table_get_comp_irq_pool() which
accurately reflects its purpose and improves code readability.

Fixes: 0477d5168b ("net/mlx5: Expose SFs IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Vlad Dogaru
521992337f net/mlx5: HWS, Rightsize bwc matcher priority
The bwc layer was clamping the matcher priority from 32 bits to 16 bits.
This didn't show up until a matcher was resized, since the initial
native matcher was created using the correct 32 bit value.

The fix also reorders fields to avoid some padding.

Fixes: 2111bb970c ("net/mlx5: HWS, added backward-compatible API handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741644104-97767-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Yevgeny Kliteynik
03ebae1992 net/mlx5: DR, use the right action structs for STEv3
Some actions in ConnectX-8 (STEv3) have different structure,
and they are handled separately in ste_ctx_v3.
This separate handling was missing two actions: INSERT_HDR
and REMOVE_HDR, which broke SWS for Linux Bridge.
This patch resolves the issue by introducing dedicated
callbacks for the insert and remove header functions,
with version-specific implementations for each STE variant.

Fixes: 4d617b5757 ("net/mlx5: DR, add support for ConnectX-8 steering")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Itamar Gozlan <igozlan@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741644104-97767-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 13:11:14 +01:00
Paolo Abeni
89d75c4c67 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:

====================
mlx5-next updates 2025-03-10

The following pull-request contains common mlx5 updates for your *net-next* tree.
Please pull and let me know of any problem.

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Add IFC bits for PPCNT recovery counters group
  net/mlx5: fs, add RDMA TRANSPORT steering domain support
  net/mlx5: Query ADV_RDMA capabilities
  net/mlx5: Limit non-privileged commands
  net/mlx5: Allow the throttle mechanism to be more dynamic
  net/mlx5: Add RDMA_CTRL HW capabilities
====================

Link: https://patch.msgid.link/1741608293-41436-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 12:40:46 +01:00
Jonas Karlman
41f35564cb net: stmmac: dwmac-rk: Remove unneeded GRF and peripheral GRF checks
Now that GRF, and peripheral GRF where needed, is validated at probe
time there is no longer any need to check and log an error in each SoC
specific operation.

Remove unneeded IS_ERR() checks and early bail out from each SoC
specific operation.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308213720.2517944-4-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 10:45:19 +01:00
Jonas Karlman
247e84f66a net: stmmac: dwmac-rk: Validate GRF and peripheral GRF during probe
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3576 and
RK3588 use a mix of GRF and peripheral GRF regs. These syscon regmaps is
located with help of a rockchip,grf and rockchip,php-grf phandle.

However, validating the rockchip,grf and rockchip,php-grf syscon regmap
is deferred until e.g. interface mode or speed is configured, inside the
individual SoC specific operations.

Change to validate the rockchip,grf and rockchip,php-grf syscon regmap
at probe time to simplify all SoC specific operations.

This should not introduce any backward compatibility issues as all
GMAC nodes have been added together with a rockchip,grf phandle (and
rockchip,php-grf where required) in their initial commit.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308213720.2517944-3-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 10:45:19 +01:00
Janik Haag
676cc91e1f net: cn23xx: fix typos
This patch fixes a few typos, spelling mistakes, and a bit of grammar,
increasing the comments readability.

Signed-off-by: Janik Haag <janik@aq0.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250307145648.1679912-2-janik@aq0.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 09:58:42 +01:00
Jian Shen
9e32850405 net: hns3: use string choices helper
Use string choices helper for better readability.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250307113733.819448-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13 09:40:54 +01:00
Jakub Kicinski
e016cf5f39 netdevsim: 'support' multi-buf XDP
Don't error out on large MTU if XDP is multi-buf.
The ping test now tests ping with XDP and high MTU.
netdevsim doesn't actually run the prog (yet?) so
it doesn't matter if the prog was multi-buf..

Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250311092820.542148-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:39:59 -07:00
Stanislav Fomichev
1d22d3060b net: drop rtnl_lock for queue_mgmt operations
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.

Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:32:35 -07:00
Simon Horman
17fef20423 net/mlx5: Avoid unnecessary use of comma operator
Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.

Flagged by clang-19 -Wcomma

No functional change intended.
Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307-mlx5-comma-v1-1-934deb6927bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:22:48 -07:00
Stanislav Fomichev
adbf627f17 eth: bnxt: add missing netdev lock management to bnxt_dl_reload_up
bnxt_dl_reload_up is completely missing instance lock management
which can result in `devlink dev reload` leaving with instance
lock held. Add the missing calls.

Also add netdev_assert_locked to make it clear that the up() method
is running with the instance lock grabbed.

v2:
- add net/netdev_lock.h include to bnxt_devlink.c for netdev_assert_locked

Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:19:15 -07:00
Stanislav Fomichev
eaca6e5dc6 eth: bnxt: request unconditional ops lock
netdev_lock_ops conditionally grabs instance lock when queue_mgmt_ops
is defined. However queue_mgmt_ops support is signaled via FW
so we can sometimes boot without queue_mgmt_ops being set.
This will result in bnxt running without instance lock which
the driver now heavily depends on. Set request_ops_lock to true
unconditionally to always request netdev instance lock.

Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:19:15 -07:00
Stanislav Fomichev
110eff172d eth: bnxt: switch to netif_close
All (error) paths that call dev_close are already holding instance lock,
so switch to netif_close to avoid the deadlock.

v2:
- add missing EXPORT_MODULE for netif_close

Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-12 13:19:15 -07:00
David S. Miller
081b575617 Few more fixes:
- cfg80211/mac80211
    - stop possible runaway wiphy worker
    - EHT should not use reserved MPDU size bits
    - don't run worker for stopped interfaces
    - fix SA Query processing with MLO
    - fix lookup of assoc link BSS entries
    - correct station flush on unauthorize
  - iwlwifi:
    - TSO fixes
    - fix non-MSI-X platforms
    - stop possible runaway restart worker
  - rejigger maintainers so I'm not CC'ed on
    everything
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmfRSMgACgkQ10qiO8sP
 aACdkw//YrPrch8eZY9YztRekiX6Ad8tuQLciJxEJh4VHMfJd7hk78QB43m1Kf75
 FITeMktCD7hjI39vGaWxJSe/eZOj4pf6BSHF2wMX1NbXpEL+drlgL5Z8+NN1Ps3l
 qy5z3JIb3EVh4Y4C2xJqP/RbZD4vXU1XoETeJQJeUI8DZgrhtTWrfrrp8PCBRFzB
 lM991wplOHyMb05M71njCDwnMqcwZ4A+QyXp2rb8oZuCM59OOM0/kkNTRd+YCJNg
 uBlAZuLIU+bipA4Fcq3h17S4CulJDzNjKSfhmDLk9gvO/JgTgYFWruXG8svACMWO
 g2frQElM1IHAYVypbQt85PtRvzENU9lcwtR8k2Nijk+wvd3BiZuGRIdhn53FVN1z
 mTpNFP/UjBBPyBI7CHQOWw2jJO44/AraENWema4JwQbTqgdhN7Tf79OeTPUsgXz9
 0D+PIf57P+uH61AYT9znN1A9t6YSdLh0a7LXGYP3E9dpkwENer5JGbqubWXKkme7
 mjQpJsiuJYUEmR8dFDq/6H4UxnYDeA/bSf9xLatmgJoU47lDg+T7eefVULTLGla9
 bVN68LxHIcegelwMw45GfGx3pRoRk0qw6/2d1ELfrAw81FrhZ2/kjOeoDWlnJtIy
 GZkRTTOBq6nLL4LGGqUXP80q8uillDtJhbddljA/pkupPn69EEk=
 =ENOH
 -----END PGP SIGNATURE-----

Merge tag 'wireless-2025-03-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Johannes berg says:

====================
Few more fixes:
 - cfg80211/mac80211
   - stop possible runaway wiphy worker
   - EHT should not use reserved MPDU size bits
   - don't run worker for stopped interfaces
   - fix SA Query processing with MLO
   - fix lookup of assoc link BSS entries
   - correct station flush on unauthorize
 - iwlwifi:
   - TSO fixes
   - fix non-MSI-X platforms
   - stop possible runaway restart worker
 - rejigger maintainers so I'm not CC'ed on
   everything
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-12 13:56:58 +00:00
Haoxiang Li
d2b9d97e89 qlcnic: fix memory leak issues in qlcnic_sriov_common.c
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if
any sriov_vlans fails to be allocated.
Add qlcnic_sriov_free_vlans() to free the memory allocated by
qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to
be allocated.

Fixes: 91b7282b61 ("qlcnic: Support VLAN id config.")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 15:23:28 +01:00
Justin Lai
415f135ace rtase: Fix improper release of ring list entries in rtase_sw_reset
Since rtase_init_ring, which is called within rtase_sw_reset, adds ring
entries already present in the ring list back into the list, it causes
the ring list to form a cycle. This results in list_for_each_entry_safe
failing to find an endpoint during traversal, leading to an error.
Therefore, it is necessary to remove the previously added ring_list nodes
before calling rtase_init_ring.

Fixes: 0796004899 ("rtase: Implement net_device_ops")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306070510.18129-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 13:25:49 +01:00
Hangbin Liu
0c5e145a35 bonding: fix incorrect MAC address setting to receive NS messages
When validation on the backup slave is enabled, we need to validate the
Neighbor Solicitation (NS) messages received on the backup slave. To
receive these messages, the correct destination MAC address must be added
to the slave. However, the target in bonding is a unicast address, which
we cannot use directly. Instead, we should first convert it to a
Solicited-Node Multicast Address and then derive the corresponding MAC
address.

Fix the incorrect MAC address setting on both slave_set_ns_maddr() and
slave_set_ns_maddrs(). Since the two function names are similar. Add
some description for the functions. Also only use one mac_addr variable
in slave_set_ns_maddr() to save some code and logic.

Fixes: 8eb36164d1 ("bonding: add ns target multicast address to slave device")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11 13:19:27 +01:00