Commit graph

20,596 commits

Author SHA1 Message Date
Linus Torvalds
e728258deb Including fixes from Netfilter.
Steady stream of fixes. Last two weeks feel comparable to the two
 weeks before the merge window. Lots of AI-aided bug discovery.
 A newer big source is Sashiko/Gemini (Roman Gushchin's system),
 which points out issues in existing code during patch review
 (maybe 25% of fixes here likely originating from Sashiko).
 Nice thing is these are often fixed by the respective maintainers,
 not drive-bys.
 
 Current release - new code bugs:
 
  - kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
 
 Previous releases - regressions:
 
  - add async ndo_set_rx_mode and switch drivers which we promised
    to be called under the per-netdev mutex to it
 
  - dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
 
  - hv_sock: report EOF instead of -EIO for FIN
 
  - vsock/virtio: fix MSG_PEEK calculation on bytes to copy
 
 Previous releases - always broken:
 
  - ipv6: fix possible UAF in icmpv6_rcv()
 
  - icmp: validate reply type before using icmp_pointers
 
  - af_unix: drop all SCM attributes for SOCKMAP
 
  - netfilter: fix a number of bugs in the osf (OS fingerprinting)
 
  - eth: intel: fix timestamp interrupt configuration for E825C
 
 Misc:
 
  - bunch of data-race annotations
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmnqkmMACgkQMUZtbf5S
 Iruqig/+NSg/YwEkZLbSaW+0LqNMIdOVZPdves97YAvNRdcKvgAPB5I13/G+koCz
 bRpmtdDLYTkfMFLaM582DO6XeO3Hsz/BrRRuRbyEz7lTi7PtxTEs1J+6W6NxGOQ2
 30f3J7OGudGlinsFV9VkJe81rvFbKZFZ9fGPmOcVzzzfLvT3rrt20iVvMOyM+PpD
 H0ixFW+myescEx6AQoGcVs/sDveJ4bpLpNG3p4gADh3Laj9HKSl00kudCIOQ1Kdy
 SEHsSZs3A87ueOnGwIBl/x24zVWGTGHyKcmc5ENPUSIaNGOWzmBxvfhb5dZ989RQ
 HQix+FMue21k4JypYwrdhU3MAnMDPLk+FDp4XJuwJ5I/caNLZXS2geIlnXOI5IFJ
 ojuq4pF5njoWtvkWGvxxRM+shIMiDUYUK+k9xTMqmge88O9ahGIAYb2qyKL+P6Sl
 mMuSRcArk6pw3lPbUA4u1wEaU52IdxRJDPQA/Ai3O5UVTfemJO/VqawQfuBE274g
 KZXG4x0lwE+LSyoguTnSqhMCJk1ZXAeHjtpz1Yo3CEHOwCH9MxEEL/dldAXWZiWN
 K0nLcUQ8fg3GnmOEzYw1gzDVJrgkR1eIrh6OCpw+UGCg0Af0HE6C6QBL9q59YhQw
 DjLJAUNM8puBNIh9paCsHf1aIcFpPXBcR5dKoufCQx41x1OOqew=
 =knNy
 -----END PGP SIGNATURE-----

Merge tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull  networking fixes from Jakub Kicinski:
 "Including fixes from Netfilter.

  Steady stream of fixes. Last two weeks feel comparable to the two
  weeks before the merge window. Lots of AI-aided bug discovery. A newer
  big source is Sashiko/Gemini (Roman Gushchin's system), which points
  out issues in existing code during patch review (maybe 25% of fixes
  here likely originating from Sashiko). Nice thing is these are often
  fixed by the respective maintainers, not drive-bys.

  Current release - new code bugs:

   - kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP

  Previous releases - regressions:

   - add async ndo_set_rx_mode and switch drivers which we promised to
     be called under the per-netdev mutex to it

   - dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops

   - hv_sock: report EOF instead of -EIO for FIN

   - vsock/virtio: fix MSG_PEEK calculation on bytes to copy

  Previous releases - always broken:

   - ipv6: fix possible UAF in icmpv6_rcv()

   - icmp: validate reply type before using icmp_pointers

   - af_unix: drop all SCM attributes for SOCKMAP

   - netfilter: fix a number of bugs in the osf (OS fingerprinting)

   - eth: intel: fix timestamp interrupt configuration for E825C

  Misc:

   - bunch of data-race annotations"

* tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (148 commits)
  rxrpc: Fix error handling in rxgk_extract_token()
  rxrpc: Fix re-decryption of RESPONSE packets
  rxrpc: Fix rxrpc_input_call_event() to only unshare DATA packets
  rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
  rxgk: Fix potential integer overflow in length check
  rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
  rxrpc: Fix potential UAF after skb_unshare() failure
  rxrpc: Fix rxkad crypto unalignment handling
  rxrpc: Fix memory leaks in rxkad_verify_response()
  net: rds: fix MR cleanup on copy error
  m68k: mvme147: Make me the maintainer
  net: txgbe: fix firmware version check
  selftests/bpf: check epoll readiness during reuseport migration
  tcp: call sk_data_ready() after listener migration
  vhost_net: fix sleeping with preempt-disabled in vhost_net_busy_poll()
  ipv6: Cap TLV scan in ip6_tnl_parse_tlv_enc_lim
  tipc: fix double-free in tipc_buf_append()
  llc: Return -EINPROGRESS from llc_ui_connect()
  ipv4: icmp: validate reply type before using icmp_pointers
  selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
  ...
2026-04-23 16:50:42 -07:00
Zhenzhong Wu
c01cfc4886 selftests/bpf: check epoll readiness during reuseport migration
Inside migrate_dance(), add epoll checks around shutdown() to
verify that the target listener is not ready before shutdown()
and becomes ready immediately after shutdown() triggers migration.

Cover TCP_ESTABLISHED and TCP_SYN_RECV. Exclude TCP_NEW_SYN_RECV
as it depends on later handshake completion.

Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Link: https://patch.msgid.link/20260422024554.130346-3-jt26wzz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-23 11:54:44 -07:00
Jiayuan Chen
cf94b3c0f0 selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
RFC 5961 Section 5.2 / RFC 793 Section 3.9 require a challenge ACK
whenever an incoming SEG.ACK falls outside
[SND.UNA - MAX.SND.WND, SND.NXT].  There is currently no packetdrill
coverage for either edge.

Add tcp_rfc5961_ack-out-of-window.pkt, which in a single passive-open
connection exercises:

  - Upper edge (SEG.ACK > SND.NXT): peer ACKs data that was never
    sent before the server has transmitted anything.
  - Lower edge (SEG.ACK < SND.UNA - MAX.SND.WND): after the server
    has sent 2000 bytes (the peer-advertised rwnd forces two 1000-byte
    segments, both acknowledged), peer sends an ACK that is older
    than the acceptable window.

Both cases must elicit a challenge ACK
<SEQ = SND.NXT, ACK = RCV.NXT, CTL = ACK>.  The per-socket RFC 5961
Section 7 rate limit is disabled for the duration of the test so that
both challenge ACKs can fire back-to-back.

Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-23 11:04:01 -07:00
Jiayuan Chen
42726ec644 tcp: send a challenge ACK on SEG.ACK > SND.NXT
RFC 5961 Section 5.2 validates an incoming segment's ACK value
against the range [SND.UNA - MAX.SND.WND, SND.NXT] and states:

  "All incoming segments whose ACK value doesn't satisfy the above
   condition MUST be discarded and an ACK sent back."

Commit 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack
Mitigation") opted Linux into this mitigation and implements the
challenge ACK on the lower side (SEG.ACK < SND.UNA - MAX.SND.WND),
but the symmetric upper side (SEG.ACK > SND.NXT) still takes the
pre-RFC-5961 path and silently returns
SKB_DROP_REASON_TCP_ACK_UNSENT_DATA, even though RFC 793 Section 3.9
(now RFC 9293 Section 3.10.7.4) has always required:

  "If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT)
   then send an ACK, drop the segment, and return."

Complete the mitigation by sending a challenge ACK on that branch,
reusing the existing tcp_send_challenge_ack() path which already
enforces the per-socket RFC 5961 Section 7 rate limit via
__tcp_oow_rate_limited().  FLAG_NO_CHALLENGE_ACK is honoured for
symmetry with the lower-edge case.

Update the existing tcp_ts_recent_invalid_ack.pkt selftest, which
drives this exact path, to consume the new challenge ACK.

Fixes: 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-23 11:04:00 -07:00
Gang Yan
d0576eb850 selftests: mptcp: add a check for sndbuf of S/C
Add a new chk_sndbuf() helper to diag.sh that extracts the sndbuf
(the 'tb' field from 'ss -m' skmem output) for both server and
client MPTCP sockets, and verifies they are equal.

Without the previous patch, it will fail:

'''
07 ....chk sndbuf server/client    [FAIL] sndbuf S=20480 != C=2630656
'''

Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-2-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-04-23 13:20:17 +02:00
Masami Hiramatsu (Google)
453553e1ed selftests/ftrace: Add a testcase for multiple fprobe events
Add a testcase for multiple fprobe events on the same function
so that it clears ftrace hash map correctly when removing the
events.

Link: https://lore.kernel.org/all/177669370353.132053.16801520791509406141.stgit@mhiramat.tok.corp.google.com/

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2026-04-22 09:26:46 +09:00
Masami Hiramatsu (Google)
132001e9f9 selftests/ftrace: Add a testcase for fprobe events on module
Add a testcase for fprobe events on module, which unloads a kernel
module on which fprobe events are probing and ensure the ftrace
hash map is cleared correctly.

Link: https://lore.kernel.org/all/177669369564.132053.623527664540176496.stgit@mhiramat.tok.corp.google.com/

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2026-04-22 09:26:37 +09:00
Stanislav Fomichev
c4dde411bc selftests: net: use ip commands instead of teamd in team rx_mode test
Replace teamd daemon usage with ip link commands for team device
setup. teamd -d daemonizes and returns to the shell before port
addition completes, creating a race: the test may create the macvlan
(and check for its address on a slave) before teamd has finished
adding ports. This makes the test inherently dependent on scheduling
timing.

Using ip commands makes port addition synchronous, removing the race
and making the test deterministic.

Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-16-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-04-21 12:50:25 +02:00
Stanislav Fomichev
ee514cdb07 selftests: net: add team_bridge_macvlan rx_mode test
Add a test that exercises the ndo_change_rx_flags path through a
macvlan -> bridge -> team -> dummy stack. This triggers dev_uc_add
under addr_list_lock which flips promiscuity on the lower device.
With the new work queue approach, this must not deadlock.

Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-15-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-04-21 12:50:25 +02:00
Linus Torvalds
f154634e42 linux_kselftest-next-7.1-next-fixes
Fixes regressions in non-bash shells and busybox support, and reverts
 a commit that regression in build and installation when one or more
 tests fail to build. Fixes duplicated test number reporting introduced
 in ktap support patch.
 
 - selftests: Fix duplicated test number reporting
 - selftests: Fix runner.sh for non-bash shells
 - selftests: Fix runner.sh busybox support
 - selftests: Deescalate error reporting
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmnmPx8ACgkQCwJExA0N
 QxwZ7g/+L4ZZDp3RyuauvCV4zhG5GQFudtvAkcLOSwBVnRbiLdPmdOXXz7IkW7DN
 U/WQx3pDOYmvtr2QdNvXch3HOdk1vUfNViU5yPNqC4jVZEMON2N7oGr2Eq+WVhi+
 gl63pRYk9ISh+5vOlzQY9UX1sLOxlME1foMJdHQEZHhgbNxlc7s/NfpqAnRC7a4l
 SFuzL/PJl9kYiMUFeYLB9kwrelvoLrzItMVz7/m56dgNVuEmbNDESBXGwJQneH6l
 SWOXPC96gu2cajluNfyhOqarkuGVD8x6J+2vWBwrDnSiyMLyealAOHnK5JGR17hW
 NErJDpqpdlIue5/h/XFnZ+4o43J8uEiUxmP7UiPAmreBllajeNz4xZPuz+i2vLH2
 O9dzzj/SV9War5txaFdqHXpbZE2zYOfhA07Xg6VdjcB0LTWaSOPqiIPr9UTwvT6o
 T7vYkvE+w4rjXwTFEscHkZ5jXrvAiWMrgiK4BuzXWy03/BvOF6LiMf0NCELvKvZG
 ZubLCJ1N/2EXgt+MX9dRmxq+7ZXCGu53TU5GeX1u/vT5lqsaPwoXT4RylZek5hwx
 DfKjEOU22TOQXAV01z1sPJvNwPZa84Hejzf6c6v2xobY/vaf4XxgyXAIAJJGOfpj
 25nEdecvjdX62kFfY/QrX7akpr7IreonpssmQVuGt3jilpq4uLg=
 =1k+f
 -----END PGP SIGNATURE-----

Merge tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Fix regressions in non-bash shells and busybox support, and revert a
  commit that regressed in build and installation when one or more tests
  fail to build.

  Fix duplicated test number reporting introduced in ktap support patch"

* tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: Fix duplicated test number reporting
  selftests: Fix runner.sh for non-bash shells
  selftests: Fix runner.sh busybox support
  selftests: Deescalate error reporting
2026-04-20 17:19:30 -07:00
Linus Torvalds
4b0b946019 RDMA v7.1 merge window
Usual collection of driver changes, more core infrastructure updates that
 typical this cycle:
 
 - Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa, ocrdma,
   erdma, rtrs, hfi1, ionic, and pvrdma
 
 - New udata validation framework and driver updates
 
 - Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in core
 
 - Promote UMEM to a core component, split out DMA block iterator logic
 
 - Introduce FRMR pools with aging, statistics, pinned handles, and netlink
   control and use it in  mlx5
 
 - Add PCIe TLP  emulation support in mlx5
 
 - Extend umem to work with revocable pinned dmabuf's and use it in irdma
 
 - More net namespace improvements for rxe
 
 - GEN4 hardware support in irdma
 
 - First steps to MW and UC support in mana_ib
 
 - Support for CQ umem and doorbells in bnxt_re
 
 - Drop opa_vnic driver from hfi1
 
 - Fixes:
     IB/core zero dmac neighbor resolution race
     GID table memory free
     rxe pad/ICRC validation and r_key async errors
     mlx4 external umem for CQ
     umem DMA attributes on unmap
     mana_ib RX steering on RSS QP destroy
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeJyjAAKCRCFwuHvBreF
 YXWOAQDZz7buqUgw45ufFMcClAfnIYeAIb0dlD5vnltvbIkUFgEAmOabYPZk0PHY
 NlmfFBmWmIYXwgMHfYPlN1xYN/+Fjww=
 =dd92
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "The usual collection of driver changes, more core infrastructure
  updates that typical this cycle:

   - Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
     ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma

   - New udata validation framework and driver updates

   - Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
     core

   - Promote UMEM to a core component, split out DMA block iterator
     logic

   - Introduce FRMR pools with aging, statistics, pinned handles, and
     netlink control and use it in mlx5

   - Add PCIe TLP emulation support in mlx5

   - Extend umem to work with revocable pinned dmabuf's and use it in
     irdma

   - More net namespace improvements for rxe

   - GEN4 hardware support in irdma

   - First steps to MW and UC support in mana_ib

   - Support for CQ umem and doorbells in bnxt_re

   - Drop opa_vnic driver from hfi1

  Fixes:

   - IB/core zero dmac neighbor resolution race

   - GID table memory free

   - rxe pad/ICRC validation and r_key async errors

   - mlx4 external umem for CQ

   - umem DMA attributes on unmap

   - mana_ib RX steering on RSS QP destroy"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
  RDMA/core: Fix user CQ creation for drivers without create_cq
  RDMA/ionic: bound node_desc sysfs read with %.64s
  IB/core: Fix zero dmac race in neighbor resolution
  RDMA/mana_ib: Support memory windows
  RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
  RDMA/core: Prefer NLA_NUL_STRING
  RDMA/core: Fix memory free for GID table
  RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
  RDMA: Remove redundant = {} for udata req structs
  RDMA/irdma: Add missing comp_mask check in alloc_ucontext
  RDMA/hns: Add missing comp_mask check in create_qp
  RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
  RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
  RDMA/hns: Use ib_copy_validate_udata_in()
  RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
  RDMA/mlx4: Use ib_copy_validate_udata_in()
  RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
  RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
  RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
  RDMA: Use ib_copy_validate_udata_in() for implicit full structs
  ...
2026-04-20 11:20:35 -07:00
Linus Torvalds
40735a683b mm.git review status for linus..mm-stable
Everything:
 
 Total patches:       121
 Reviews/patch:       2.11
 Reviewed rate:       90%
 
 Excluding DAMON:
 
 Total patches:       113
 Reviews/patch:       2.25
 Reviewed rate:       96%
 
 - The 33 patch series "Eliminate Dying Memory Cgroup" from Qi Zheng and
   Muchun Song addresses the longstanding "dying memcg problem".  A
   situation wherein a no-longer-used memory control group will hang around
   for an extended period pointlessly consuming memory.  The [0/N]
   changelog has a good overview of this work.
 
 - The 3 patch series "fix unexpected type conversions and potential
   overflows" from Qi Zheng fixes a couple of potential 32-bit/64-bit
   issues which were identified during review of the "Eliminate Dying
   Memory Cgroup" series.
 
 - The 6 patch series "kho: history: track previous kernel version and
   kexec boot count" from Breno Leitao uses Kexec Handover (KHO) to pass
   the previous kernel's version string and the number of kexec reboots
   since the last cold boot to the next kernel, and prints it at boot time.
 
 - The 4 patch series "liveupdate: prevent double preservation" from
   Pasha Tatashin teaches LUO to avoid managing the same file across
   different active sessions.
 
 - The 10 patch series "liveupdate: Fix module unloading and unregister
   API" from Pasha Tatashin addresses an issue with how LUO handles module
   reference counting and unregistration during module unloading.
 
 - The 2 patch series "zswap pool per-CPU acomp_ctx simplifications" from
   Kanchana Sridhar simplifies and cleans up the zswap crypto compression
   handling and improves the lifecycle management of zswap pool's per-CPU
   acomp_ctx resources.
 
 - The 2 patch series "mm/damon/core: fix damon_call()/damos_walk() vs
   kdmond exit race" from SeongJae Park addresses unlikely but possible
   leaks and deadlocks in damon_call() and damon_walk().
 
 - The 2 patch series "mm/damon/core: validate damos_quota_goal->nid"
   from SeongJae Park fixes a couple of root-only wild pointer
   dereferences.
 
 - The 2 patch series "Docs/admin-guide/mm/damon: warn commit_inputs vs
   other params race" from SeongJae Park updates the DAMON documentation to
   warn operators about potential races which can occur if the
   commit_inputs parameter is altered at the wrong time.
 
 - The 3 patch series "Minor hmm_test fixes and cleanups" from Alistair
   Popple implements two bugfixes a cleanup for the HMM kernel selftests.
 
 - The 6 patch series "Modify memfd_luo code" from Chenghao Duan provides
   cleanups, simplifications and speedups in the memfd_lou code.
 
 - The 4 patch series "mm, kvm: allow uffd support in guest_memfd" from
   Mike Rapoport enables support for userfaultfd in guest_memfd.
 
 - The 6 patch series "selftests/mm: skip several tests when thp is not
   available" from Chunyu Hu fixes several issues in the selftests code
   which were causing breakage when the tests were run on CONFIG_THP=n
   kernels.
 
 - The 2 patch series "mm/mprotect: micro-optimization work" from Pedro
   Falcato implements a couple of nice speedups for mprotect().
 
 - The 3 patch series "MAINTAINERS: update KHO and LIVE UPDATE entries"
   from Pratyush Yadav reflects upcoming changes in the maintenance of KHO,
   LUO, memfd_luo, kexec, crash, kdump and probably other kexec-based
   things - they are being moved out of mm.git and into a new git tree.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaeNL/wAKCRDdBJ7gKXxA
 jt7EAQCEEQvYYTjld+8HJKsCbavY4pEfci7z4SBiQyIPjRracQD/ZfjXnzL7ucc1
 b6q6G4TcslvIDBgzVkk9G2BVn2oCoAg=
 =3ozv
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2026-04-18-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull more MM updates from Andrew Morton:

 - "Eliminate Dying Memory Cgroup" (Qi Zheng and Muchun Song)

   Address the longstanding "dying memcg problem". A situation wherein a
   no-longer-used memory control group will hang around for an extended
   period pointlessly consuming memory

 - "fix unexpected type conversions and potential overflows" (Qi Zheng)

   Fix a couple of potential 32-bit/64-bit issues which were identified
   during review of the "Eliminate Dying Memory Cgroup" series

 - "kho: history: track previous kernel version and kexec boot count"
   (Breno Leitao)

   Use Kexec Handover (KHO) to pass the previous kernel's version string
   and the number of kexec reboots since the last cold boot to the next
   kernel, and print it at boot time

 - "liveupdate: prevent double preservation" (Pasha Tatashin)

   Teach LUO to avoid managing the same file across different active
   sessions

 - "liveupdate: Fix module unloading and unregister API" (Pasha
   Tatashin)

   Address an issue with how LUO handles module reference counting and
   unregistration during module unloading

 - "zswap pool per-CPU acomp_ctx simplifications" (Kanchana Sridhar)

   Simplify and clean up the zswap crypto compression handling and
   improve the lifecycle management of zswap pool's per-CPU acomp_ctx
   resources

 - "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race"
   (SeongJae Park)

   Address unlikely but possible leaks and deadlocks in damon_call() and
   damon_walk()

 - "mm/damon/core: validate damos_quota_goal->nid" (SeongJae Park)

   Fix a couple of root-only wild pointer dereferences

 - "Docs/admin-guide/mm/damon: warn commit_inputs vs other params race"
   (SeongJae Park)

   Update the DAMON documentation to warn operators about potential
   races which can occur if the commit_inputs parameter is altered at
   the wrong time

 - "Minor hmm_test fixes and cleanups" (Alistair Popple)

   Bugfixes and a cleanup for the HMM kernel selftests

 - "Modify memfd_luo code" (Chenghao Duan)

   Cleanups, simplifications and speedups to the memfd_lou code

 - "mm, kvm: allow uffd support in guest_memfd" (Mike Rapoport)

   Support for userfaultfd in guest_memfd

 - "selftests/mm: skip several tests when thp is not available" (Chunyu
   Hu)

   Fix several issues in the selftests code which were causing breakage
   when the tests were run on CONFIG_THP=n kernels

 - "mm/mprotect: micro-optimization work" (Pedro Falcato)

   A couple of nice speedups for mprotect()

 - "MAINTAINERS: update KHO and LIVE UPDATE entries" (Pratyush Yadav)

   Document upcoming changes in the maintenance of KHO, LUO, memfd_luo,
   kexec, crash, kdump and probably other kexec-based things - they are
   being moved out of mm.git and into a new git tree

* tag 'mm-stable-2026-04-18-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (121 commits)
  MAINTAINERS: add page cache reviewer
  mm/vmscan: avoid false-positive -Wuninitialized warning
  MAINTAINERS: update Dave's kdump reviewer email address
  MAINTAINERS: drop include/linux/liveupdate from LIVE UPDATE
  MAINTAINERS: drop include/linux/kho/abi/ from KHO
  MAINTAINERS: update KHO and LIVE UPDATE maintainers
  MAINTAINERS: update kexec/kdump maintainers entries
  mm/migrate_device: remove dead migration entry check in migrate_vma_collect_huge_pmd()
  selftests: mm: skip charge_reserved_hugetlb without killall
  userfaultfd: allow registration of ranges below mmap_min_addr
  mm/vmstat: fix vmstat_shepherd double-scheduling vmstat_update
  mm/hugetlb: fix early boot crash on parameters without '=' separator
  zram: reject unrecognized type= values in recompress_store()
  docs: proc: document ProtectionKey in smaps
  mm/mprotect: special-case small folios when applying permissions
  mm/mprotect: move softleaf code out of the main function
  mm: remove '!root_reclaim' checking in should_abort_scan()
  mm/sparse: fix comment for section map alignment
  mm/page_io: use sio->len for PSWPIN accounting in sio_read_complete()
  selftests/mm: transhuge_stress: skip the test when thp not available
  ...
2026-04-19 08:01:17 -07:00
Cao Ruichuang
d432e8847f selftests: mm: skip charge_reserved_hugetlb without killall
charge_reserved_hugetlb.sh tears down background writers with killall from
psmisc.  Minimal Ubuntu images do not always provide that tool, so the
selftest fails in cleanup for an environment reason rather than for the
hugetlb behavior it is trying to cover.

Skip the test when killall is unavailable, similar to the existing root
check, so these environments report the dependency clearly instead of
failing the test.

Link: https://lore.kernel.org/20260410044139.67480-1-create0818@163.com
Signed-off-by: Cao Ruichuang <create0818@163.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:56 -07:00
Chunyu Hu
cfe9a446f5 selftests/mm: transhuge_stress: skip the test when thp not available
The test requires thp, skip the test when thp is not available to avoid
false positive.

Tested with thp disabled kernel.
Before the fix:
  # --------------------------------
  # running ./transhuge-stress -d 20
  # --------------------------------
  # TAP version 13
  # 1..1
  # transhuge-stress: allocate 1453 transhuge pages, using 2907 MiB virtual memory and 11 MiB of ram
  # Bail out! MADV_HUGEPAGE# Planned tests != run tests (1 != 0)
  # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
  # [FAIL]
  not ok 60 transhuge-stress -d 20 # exit=1

After the fix:
  # --------------------------------
  # running ./transhuge-stress -d 20
  # --------------------------------
  # TAP version 13
  # 1..0 # SKIP Transparent Hugepages not available
  # [SKIP]
  ok 5 transhuge-stress -d 20 # SKIP

Link: https://lore.kernel.org/20260402014543.1671131-7-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:54 -07:00
Chunyu Hu
dad4964a34 selftests/mm: split_huge_page_test: skip the test when thp is not available
When thp is not enabled on some kernel config such as realtime kernel, the
test will report failure.  Fix the false positive by skipping the test
directly when thp is not enabled.

Tested with thp disabled kernel:
Before The fix:
  # --------------------------------------------------
  # running ./split_huge_page_test /tmp/xfs_dir_Ywup9p
  # --------------------------------------------------
  # TAP version 13
  # Bail out! Reading PMD pagesize failed
  # # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
  # [FAIL]
  not ok 61 split_huge_page_test /tmp/xfs_dir_Ywup9p # exit=1

After the fix:
  # --------------------------------------------------
  # running ./split_huge_page_test /tmp/xfs_dir_YHPUPl
  # --------------------------------------------------
  # TAP version 13
  # 1..0 # SKIP Transparent Hugepages not available
  # [SKIP]
  ok 6 split_huge_page_test /tmp/xfs_dir_YHPUPl # SKIP

Link: https://lore.kernel.org/20260402014543.1671131-6-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:54 -07:00
Chunyu Hu
a784a3a39c selftests/mm/vm_util: robust write_file()
Add three more checks for buflen and numwritten.  The buflen should be at
least two, that means at least one char and the null-end.  The error case
check is added by checking numwriten < 0 instead of numwritten < 1.  And
the truncate case is checked.  The test will exit if any of these
conditions aren't met.

Additionally, add more print information when a write failure occurs or a
truncated write happens, providing clearer diagnostics.

Link: https://lore.kernel.org/20260402014543.1671131-5-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:54 -07:00
Chunyu Hu
710d2f3079 selftests/mm: move write_file helper to vm_util
thp_settings provides write_file() helper for safely writing to a file and
exit when write failure happens.  It's a very low level helper and many
sub tests need such a helper, not only thp tests.

split_huge_page_test also defines a write_file locally.  The two have
minior differences in return type and used exit api.  And there would be
conflicts if split_huge_page_test wanted to include thp_settings.h because
of different prototype, making it less convenient.

It's possisble to merge the two, although some tests don't use the
kselftest infrastrucutre for testing.  It would also work when using the
ksft_exit_msg() to exit in my test, as the counters are all zero.  Output
will be like:

  TAP version 13
  1..62
  Bail out! /proc/sys/vm/drop_caches1 open failed: No such file or directory
  # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0

So here we just keep the version in split_huge_page_test, and move it into
the vm_util.  This makes it easy to maitain and user could just include
one vm_util.h when they don't need thp setting helpers.  Keep the
prototype of void return as the function will exit on any error, return
value is not necessary, and will simply the callers like write_num() and
write_string().

Link: https://lore.kernel.org/20260402014543.1671131-4-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:54 -07:00
Chunyu Hu
929d5fbf1a selftests/mm: soft-dirty: skip two tests when thp is not available
The test_hugepage test contain two sub tests.  If just reporting one skip
when thp not available, there will be error in the log because the test
count don't match the test plan.  Change to skip two tests by running the
ksft_test_result_skip twice in this case.

Without the fix (run test on thp disabled kernel):
  ./run_vmtests.sh -t soft_dirty
  # --------------------
  # running ./soft-dirty
  # --------------------
  # TAP version 13
  # 1..19
  # ok 1 Test test_simple
  # ok 2 Test test_vma_reuse dirty bit of allocated page
  # ok 3 Test test_vma_reuse dirty bit of reused address page
  # ok 4 # SKIP Transparent Hugepages not available
  # ok 5 Test test_mprotect-anon dirty bit of new written page
  # ok 6 Test test_mprotect-anon soft-dirty clear after clear_refs
  # ok 7 Test test_mprotect-anon soft-dirty clear after marking RO
  # ok 8 Test test_mprotect-anon soft-dirty clear after marking RW
  # ok 9 Test test_mprotect-anon soft-dirty after rewritten
  # ok 10 Test test_mprotect-file dirty bit of new written page
  # ok 11 Test test_mprotect-file soft-dirty clear after clear_refs
  # ok 12 Test test_mprotect-file soft-dirty clear after marking RO
  # ok 13 Test test_mprotect-file soft-dirty clear after marking RW
  # ok 14 Test test_mprotect-file soft-dirty after rewritten
  # ok 15 Test test_merge-anon soft-dirty after remap merge 1st pg
  # ok 16 Test test_merge-anon soft-dirty after remap merge 2nd pg
  # ok 17 Test test_merge-anon soft-dirty after mprotect merge 1st pg
  # ok 18 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
  # # 1 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
  # # Planned tests != run tests (19 != 18)
  # # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
  # [FAIL]
  not ok 52 soft-dirty # exit=1

With the fix (run test on thp disabled kernel):
  ./run_vmtests.sh -t soft_dirty
  # --------------------
  # running ./soft-dirty
  # TAP version 13
  # --------------------
  # running ./soft-dirty
  # --------------------
  # TAP version 13
  # 1..19
  # ok 1 Test test_simple
  # ok 2 Test test_vma_reuse dirty bit of allocated page
  # ok 3 Test test_vma_reuse dirty bit of reused address page
  # # Transparent Hugepages not available
  # ok 4 # SKIP Test test_hugepage huge page allocation
  # ok 5 # SKIP Test test_hugepage huge page dirty bit
  # ok 6 Test test_mprotect-anon dirty bit of new written page
  # ok 7 Test test_mprotect-anon soft-dirty clear after clear_refs
  # ok 8 Test test_mprotect-anon soft-dirty clear after marking RO
  # ok 9 Test test_mprotect-anon soft-dirty clear after marking RW
  # ok 10 Test test_mprotect-anon soft-dirty after rewritten
  # ok 11 Test test_mprotect-file dirty bit of new written page
  # ok 12 Test test_mprotect-file soft-dirty clear after clear_refs
  # ok 13 Test test_mprotect-file soft-dirty clear after marking RO
  # ok 14 Test test_mprotect-file soft-dirty clear after marking RW
  # ok 15 Test test_mprotect-file soft-dirty after rewritten
  # ok 16 Test test_merge-anon soft-dirty after remap merge 1st pg
  # ok 17 Test test_merge-anon soft-dirty after remap merge 2nd pg
  # ok 18 Test test_merge-anon soft-dirty after mprotect merge 1st pg
  # ok 19 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
  # # 2 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
  # # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:2 error:0
  # [PASS]
  ok 1 soft-dirty
  hwpoison_inject
  # SUMMARY: PASS=1 SKIP=0 FAIL=0
  1..1

Link: https://lore.kernel.org/20260402014543.1671131-3-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:54 -07:00
Chunyu Hu
fb0fca46b9 selftests/mm/guard-regions: skip collapse test when thp not enabled
Patch series "selftests/mm: skip several tests when thp is not available",
v8.

There are several tests requires transprarent hugepages, when run on thp
disabled kernel such as realtime kernel, there will be false negative. 
Mark those tests as skip when thp is not available.


This patch (of 6):

When thp is not available, just skip the collape tests to avoid the false
negative.

Without the change, run with a thp disabled kernel:
  ./run_vmtests.sh -t madv_guard -n 1
  <snip/>
  #  RUN           guard_regions.anon.collapse ...
  # guard-regions.c:2217:collapse:Expected madvise(ptr, size, MADV_NOHUGEPAGE) (-1) == 0 (0)
  # collapse: Test terminated by assertion
  #          FAIL  guard_regions.anon.collapse
  not ok 2 guard_regions.anon.collapse
  <snip/>
  #  RUN           guard_regions.shmem.collapse ...
  # guard-regions.c:2217:collapse:Expected madvise(ptr, size, MADV_NOHUGEPAGE) (-1) == 0 (0)
  # collapse: Test terminated by assertion
  #          FAIL  guard_regions.shmem.collapse
  not ok 32 guard_regions.shmem.collapse
  <snip/>
  #  RUN           guard_regions.file.collapse ...
  # guard-regions.c:2217:collapse:Expected madvise(ptr, size, MADV_NOHUGEPAGE) (-1) == 0 (0)
  # collapse: Test terminated by assertion
  #          FAIL  guard_regions.file.collapse
  not ok 62 guard_regions.file.collapse
  <snip/>
  # FAILED: 87 / 90 tests passed.
  # 17 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
  # Totals: pass:70 fail:3 xfail:0 xpass:0 skip:17 error:0

With this change, run with thp disabled kernel:
  ./run_vmtests.sh -t madv_guard -n 1
  <snip/>
  #  RUN           guard_regions.anon.collapse ...
  #      SKIP      Transparent Hugepages not available
  #            OK  guard_regions.anon.collapse
  ok 2 guard_regions.anon.collapse # SKIP Transparent Hugepages not available
  <snip/>
  #  RUN           guard_regions.file.collapse ...
  #      SKIP      Transparent Hugepages not available
  #            OK  guard_regions.file.collapse
  ok 62 guard_regions.file.collapse # SKIP Transparent Hugepages not available
  <snip/>
  #  RUN           guard_regions.shmem.collapse ...
  #      SKIP      Transparent Hugepages not available
  #            OK  guard_regions.shmem.collapse
  ok 32 guard_regions.shmem.collapse # SKIP Transparent Hugepages not available
  <snip/>
  # PASSED: 90 / 90 tests passed.
  # 20 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
  # Totals: pass:70 fail:0 xfail:0 xpass:0 skip:20 error:0

Link: https://lore.kernel.org/20260402014543.1671131-1-chuhu@redhat.com
Link: https://lore.kernel.org/20260402014543.1671131-2-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:54 -07:00
Alistair Popple
f9d7975c52 selftests/mm: hmm-tests: don't hardcode THP size to 2MB
Several HMM tests hardcode TWOMEG as the THP size. This is wrong on
architectures where the PMD size is not 2MB such as arm64 with 64K base
pages where THP is 512MB. Fix this by using read_pmd_pagesize() from
vm_util instead.

While here also replace the custom file_read_ulong() helper used to
parse the default hugetlbfs page size from /proc/meminfo with the
existing default_huge_page_size() from vm_util.

Link: https://lore.kernel.org/20260331063445.3551404-3-apopple@nvidia.com
Link: https://lore.kernel.org/linux-mm/8bd0396a-8997-4d2e-a13f-5aac033083d7@linux.dev/
Fixes: fee9f6d1b8 ("mm/hmm/test: add selftests for HMM")
Fixes: 519071529d ("selftests/mm/hmm-tests: new tests for zone device THP migration")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/linux-mm/8bd0396a-8997-4d2e-a13f-5aac033083d7@linux.dev/
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger,kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:52 -07:00
Li Wang
047a6d4940 selftests/mm: skip hugetlb_dio tests when DIO alignment is incompatible
hugetlb_dio test uses sub-page offsets (pagesize / 2) to verify that
hugepages used as DIO user buffers are correctly unpinned at completion.

However, on filesystems with a logical block size larger than half the
page size (e.g., 4K-sector block devices), these unaligned DIO writes are
rejected with -EINVAL, causing the test to fail unexpectedly.

Add get_dio_alignment() to query the filesystem's required DIO alignment
via statx(STATX_DIOALIGN) and skip individual test cases whose file offset
or write size is not a multiple of that alignment.  Aligned cases continue
to run so the core coverage is preserved.

While here, open the temporary file once in main() and share the fd across
all test cases instead of reopening it in each invocation.

=== Reproduce Steps ===

  # dd if=/dev/zero of=/tmp/test.img bs=1M count=512
  # losetup --sector-size 4096 /dev/loop0 /tmp/test.img
  # mkfs.xfs /dev/loop0
  # mkdir -p /mnt/dio_test
  # mount /dev/loop0 /mnt/dio_test

  // Modify test to open /mnt/dio_test and rebuild it:
  -       fd = open("/tmp", O_TMPFILE | O_RDWR | O_DIRECT, 0664);
  +       fd = open("/mnt/dio_test", O_TMPFILE | O_RDWR | O_DIRECT, 0664);

  # getconf PAGESIZE
  4096

  # echo 100 >/proc/sys/vm/nr_hugepages

  # ./hugetlb_dio
  TAP version 13
  1..4
  # No. Free pages before allocation : 100
  # No. Free pages after munmap : 100
  ok 1 free huge pages from 0-12288
  Bail out! Error writing to file
  : Invalid argument (22)
  # Planned tests != run tests (4 != 1)
  # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

Link: https://lore.kernel.org/20260401090520.24018-1-liwang@redhat.com
Signed-off-by: Li Wang <liwang@redhat.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Suggested-by: David Hildenbrand <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:52 -07:00
Lorenzo Stoakes (Oracle)
84f4928446 tools/testing/selftests: add merge test for partial msealed range
Commit 2697dd8ae7 ("mm/mseal: update VMA end correctly on merge") fixed
an issue in the loop which iterates through VMAs applying mseal, which was
triggered by mseal()'ing a range of VMAs where the second was mseal()'d
and the first mergeable with it, once mseal()'d.

Add a regression test to assert that this behaviour is correct.  We place
it in the merge selftests as this is strictly an issue with merging (via a
vma_modify() invocation).

It also asserts that mseal()'d ranges are correctly merged as you'd
expect.

The test is implemented such that it is skipped if mseal() is not
available on the system.

[rppt@kernel.org: fix inclusions, to fix handle_uprobe_upon_merged_vma()]
  Link: https://lore.kernel.org/ac_mCIUQWRAbuH8F@kernel.org
[ljs@kernel.org: simplifications per Pedro]
  Link: https://lore.kernel.org/1c9c922d-5cb5-4cff-9273-b737cdb57ca1@lucifer.local
Link: https://lore.kernel.org/20260331073627.50010-1-ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:52 -07:00
Pasha Tatashin
e3e613a33e selftests: liveupdate: add test for double preservation
Verify that a file can only be preserved once across all active sessions. 
Attempting to preserve it a second time, whether in the same or a
different session, should fail with EBUSY.

Link: https://lore.kernel.org/20260326163943.574070-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christian Brauner <brauner@kernel.org> 
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-04-18 00:10:49 -07:00
Linus Torvalds
eb0d6d97c2 bpf-fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmnihOkACgkQ6rmadz2v
 bTqjQA/+K6R/teQRwVmP1GDrfBjz2TXUzCN1WQQLzbnJNR96Mzq72+aTWjza89BK
 yEUP379qiOeUfEyyV7DNfHh8hAclUAMKuvI3T3pshLQhpOS0+YcpfbakEZbos+My
 AzEGhGl2nhT7S5twHFznCpuSaLgqldHkdAy4BZIiFkOS5lPBX9CU++OAslFPM+f8
 R28JQYWuv2/b1mRsz8zDmQQXxwH/Rpz9hdJKcpm/kCYYBay3cAFV7ArFJfn+Y5se
 9I6mTwNQ+xtSxtsmR/lftlGo1Vv9ah6qM9gKwgju0SkNrS+9UBlNUSmTrJk1fz+d
 SxdppCrqxwHY3UVd62eF4fWWgusC+oMuKzTh6d+D/ZkKvnEjdAx5XQ7uUQyYhKil
 G12vvKWcHit0Qz9RAhqlEEZ+GIpFTtLql6aW7pRmQKE8/vmQwAD1HBqNqWYKjokW
 btlJ3fUOGu8VHtnYbI3FN6VsK8BU9t/xMny9Fys9X4KmtWBLsm4udmiorV9uC+w6
 xV2s+x+ahythTEzVICB6BlQotSRyMd9kR5qisJsetWk+7NBY0Bwn7C0kfVGepHh0
 WerFSYdSifTvBWQjXnvqmAX7YspmpZvevw8PCtoPq1xq5d1FrYu1K5GX/xzpy+pH
 p13afkbN7Mk6OwteFefD1B0ofug3V9sx3HBI72ENs1Z+hh1KdOQ=
 =79I2
 -----END PGP SIGNATURE-----

Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Pull bpf fixes from Alexei Starovoitov:
 "Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
  since all JITs had to be touched to move constant blinding out and
  pass bpf_verifier_env in.

   - Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)

   - Dissociate struct_ops program with map if map_update fails (Amery
     Hung)

   - Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)

   - Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
     Borkmann)

   - Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
     (Eduard Zingerman)

   - Copy token from main to subprogs to fix missing kallsyms (Eduard
     Zingerman)

   - Prevent double close and leak of btf objects in libbpf (Jiri Olsa)

   - Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)

   - Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
     Yatsenko)

   - Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
     arm64 and riscv JITs (Puranjay Mohan)

   - Fix out of bounds access. Validate node_id in arena_alloc_pages()
     (Puranjay Mohan)

   - Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)

   - Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
     indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)

   - Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"

* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
  bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
  bpf: Dissociate struct_ops program with map if map_update fails
  bpf: Validate node_id in arena_alloc_pages()
  libbpf: Prevent double close and leak of btf objects
  selftests/bpf: cover UTF-8 trace_printk output
  bpf: allow UTF-8 literals in bpf_bprintf_prepare()
  selftests/bpf: Reject scalar store into kptr slot
  bpf: Fix NULL deref in map_kptr_match_type for scalar regs
  bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
  bpf, arm64: Emit BTI for indirect jump target
  bpf, x86: Emit ENDBR for indirect jump targets
  bpf: Add helper to detect indirect jump targets
  bpf: Pass bpf_verifier_env to JIT
  bpf: Move constants blinding out of arch-specific JITs
  bpf, sockmap: Take state lock for af_unix iter
  bpf, sockmap: Fix af_unix null-ptr-deref in proto update
  selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
  bpf, sockmap: Fix af_unix iter deadlock
  bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
  selftests/bpf: verify kallsyms entries for token-loaded subprograms
  ...
2026-04-17 15:58:22 -07:00
Mark Brown
83ef26f911 selftests: Fix duplicated test number reporting
Commit 2964f6b816 ("selftests: Use ktap helpers for runner.sh") converted
the prints in runner.sh to use the relevant helpers from ktap_helpers.sh,
not modifying any of the strings printed in the process. This included
converting all the result reports to use the relevant ktap_test_ function.
Since the output was originally KTAP compliant the strings reported for
test names now include test numbers:

  ok 59 59 selftests: arm64: syscall-abi

instead of the expected format:

  ok 59 selftests: arm64: syscall-abi

which causes result parsers to interpret the second number as part of the
test name.

Given the use of the helpers the tracking of test numbers by runner.sh is
now redundant, remove it entirely to restore the expected output format.

Link: https://lore.kernel.org/r/20260417-selftests-fix-double-number-v1-1-1be5d7c36b94@kernel.org
Fixes: 2964f6b816 ("selftests: Use ktap helpers for runner.sh")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2026-04-17 11:29:03 -06:00
Linus Torvalds
cb30bf881c tracing updates for v7.1:
- Fix printf format warning for bprintf
 
   sunrpc uses a trace_printk() that triggers a printf warning during the
   compile. Move the __printf() attribute around for when debugging is not
   enabled the warning will go away.
 
 - Remove redundant check for EVENT_FILE_FL_FREED in event_filter_write()
 
   The FREED flag is checked in the call to event_file_file() and then
   checked again right afterward, which is unneeded.
 
 - Clean up event_file_file() and event_file_data() helpers
 
   These helper functions played a different role in the past, but now with
   eventfs, the READ_ONCE() isn't needed. Simplify the code a bit and also
   add a warning to event_file_data() if the file or its data is not present.
 
 - Remove updating file->private_data in tracing open
 
   All access to the file private data is handled by the helper functions,
   which do not use file->private_data. Stop updating it on open.
 
 - Show ENUM names in function arguments via BTF in function tracing
 
   When showing the function arguments when func-args option is set for
   function tracing, if one of the arguments is found to be an enum, show the
   name of the enum instead of its number.
 
 - Add new trace_call__##name() API for tracepoints
 
   Tracepoints are enabled via static_branch() blocks, where when not
   enabled, there's only a nop that is in the code where the execution will
   just skip over it. When tracing is enabled, the nop is converted to a
   direct jump to the tracepoint code. Sometimes more calculations are
   required to be performed to update the parameters of the tracepoint. In
   this case, trace_##name##_enabled() is called which is a static_branch()
   that gets enabled only when the tracepoint is enabled. This allows the
   extra calculations to also be skipped by the nop:
 
   if (trace_foo_enabled()) {
       x = bar();
       trace_foo(x);
   }
 
   Where the x=bar() is only performed when foo is enabled. The problem with
   this approach is that there's now two static_branch() calls. One for
   checking if the tracepoint is enabled, and then again to know if the
   tracepoint should be called. The second one is redundant.
 
   Introduce trace_call__foo() that will call the foo() tracepoint directly
   without doing a static_branch():
 
   if (trace_foo_enabled()) {
       x = bar();
       trace_call__foo();
   }
 
 - Update various locations to use the new trace_call__##name() API
 
 - Move snapshot code out of trace.c
 
   Cleaning up trace.c to not be a "dump all", move the snapshot code out of
   it and into a new trace_snapshot.c file.
 
 - Clean up some "%*.s" to "%*s"
 
 - Allow boot kernel command line options to be called multiple times
 
   Have options like:
 
     ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
 
   Equal to:
 
     ftrace_filter=foo,bar,zoo
 
 - Fix ipi_raise event CPU field to be a CPU field
 
   The ipi_raise target_cpus field is defined as a __bitmask(). There is now a
   __cpumask() field definition. Update the field to use that.
 
 - Have hist_field_name() use a snprintf() and not a series of strcat()
 
   It's safer to use snprintf() that a series of strcat().
 
 - Fix tracepoint regfunc balancing
 
   A tracepoint can define a "reg" and "unreg" function that gets called
   before the tracepoint is enabled, and after it is disabled respectively.
   But on error, after the "reg" func is called and the tracepoint is not
   enabled, the "unreg" function is not called to tear down what the "reg"
   function performed.
 
 - Fix output that shows what histograms are enabled
 
   Event variables are displayed incorrectly in the histogram output.
 
   Instead of "sched.sched_wakeup.$var", it is showing
   "$sched.sched_wakeup.var" where the '$' is in the incorrect location.
 
 - Some other simple cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeCpvxQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qt2WAP44m85BbAjBqJe4WR103eOXV+bREBta
 dRoReKJOMe519gEAp0rK/HoCvHgHhIGe3gaGdIsNhnaxoFyNWMG/wokoLAY=
 =Hg6+
 -----END PGP SIGNATURE-----

Merge tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

 - Fix printf format warning for bprintf

   sunrpc uses a trace_printk() that triggers a printf warning during
   the compile. Move the __printf() attribute around for when debugging
   is not enabled the warning will go away

 - Remove redundant check for EVENT_FILE_FL_FREED in
   event_filter_write()

   The FREED flag is checked in the call to event_file_file() and then
   checked again right afterward, which is unneeded

 - Clean up event_file_file() and event_file_data() helpers

   These helper functions played a different role in the past, but now
   with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
   and also add a warning to event_file_data() if the file or its data
   is not present

 - Remove updating file->private_data in tracing open

   All access to the file private data is handled by the helper
   functions, which do not use file->private_data. Stop updating it on
   open

 - Show ENUM names in function arguments via BTF in function tracing

   When showing the function arguments when func-args option is set for
   function tracing, if one of the arguments is found to be an enum,
   show the name of the enum instead of its number

 - Add new trace_call__##name() API for tracepoints

   Tracepoints are enabled via static_branch() blocks, where when not
   enabled, there's only a nop that is in the code where the execution
   will just skip over it. When tracing is enabled, the nop is converted
   to a direct jump to the tracepoint code. Sometimes more calculations
   are required to be performed to update the parameters of the
   tracepoint. In this case, trace_##name##_enabled() is called which is
   a static_branch() that gets enabled only when the tracepoint is
   enabled. This allows the extra calculations to also be skipped by the
   nop:

	if (trace_foo_enabled()) {
		x = bar();
		trace_foo(x);
	}

   Where the x=bar() is only performed when foo is enabled. The problem
   with this approach is that there's now two static_branch() calls. One
   for checking if the tracepoint is enabled, and then again to know if
   the tracepoint should be called. The second one is redundant

   Introduce trace_call__foo() that will call the foo() tracepoint
   directly without doing a static_branch():

	if (trace_foo_enabled()) {
		x = bar();
		trace_call__foo();
	}

 - Update various locations to use the new trace_call__##name() API

 - Move snapshot code out of trace.c

   Cleaning up trace.c to not be a "dump all", move the snapshot code
   out of it and into a new trace_snapshot.c file

 - Clean up some "%*.s" to "%*s"

 - Allow boot kernel command line options to be called multiple times

   Have options like:

	ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo

   Equal to:

	ftrace_filter=foo,bar,zoo

 - Fix ipi_raise event CPU field to be a CPU field

   The ipi_raise target_cpus field is defined as a __bitmask(). There is
   now a __cpumask() field definition. Update the field to use that

 - Have hist_field_name() use a snprintf() and not a series of strcat()

   It's safer to use snprintf() that a series of strcat()

 - Fix tracepoint regfunc balancing

   A tracepoint can define a "reg" and "unreg" function that gets called
   before the tracepoint is enabled, and after it is disabled
   respectively. But on error, after the "reg" func is called and the
   tracepoint is not enabled, the "unreg" function is not called to tear
   down what the "reg" function performed

 - Fix output that shows what histograms are enabled

   Event variables are displayed incorrectly in the histogram output

   Instead of "sched.sched_wakeup.$var", it is showing
   "$sched.sched_wakeup.var" where the '$' is in the incorrect location

 - Some other simple cleanups

* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
  selftests/ftrace: Add test case for fully-qualified variable references
  tracing: Fix fully-qualified variable reference printing in histograms
  tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
  tracing: Rebuild full_name on each hist_field_name() call
  tracing: Report ipi_raise target CPUs as cpumask
  tracing: Remove duplicate latency_fsnotify() stub
  tracing: Preserve repeated trace_trigger boot parameters
  tracing: Append repeated boot-time tracing parameters
  tracing: Remove spurious default precision from show_event_trigger/filter formats
  cpufreq: Use trace_call__##name() at guarded tracepoint call sites
  tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
  tracing: Move snapshot code out of trace.c and into trace_snapshot.c
  mm: damon: Use trace_call__##name() at guarded tracepoint call sites
  btrfs: Use trace_call__##name() at guarded tracepoint call sites
  spi: Use trace_call__##name() at guarded tracepoint call sites
  i2c: Use trace_call__##name() at guarded tracepoint call sites
  kernel: Use trace_call__##name() at guarded tracepoint call sites
  tracepoint: Add trace_call__##name() API
  tracing: trace_mmap.h: fix a kernel-doc warning
  tracing: Pretty-print enum parameters in function arguments
  ...
2026-04-17 09:43:12 -07:00
Linus Torvalds
01f492e181 Arm:
- Add support for tracing in the standalone EL2 hypervisor code, which
   should help both debugging and performance analysis.  This uses the
   new infrastructure for 'remote' trace buffers that can be exposed
   by non-kernel entities such as firmware, and which came through the
   tracing tree.
 
 - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting
   point for supporting the new GIC architecture in KVM.
 
 - Finally add support for pKVM protected guests, where pages are unmapped
   from the host as they are faulted into the guest and can be shared back
   from the guest using pKVM hypercalls.  Protected guests are created
   using a new machine type identifier.  As the elusive guestmem has not
   yet delivered on its promises, anonymous memory is also supported.
 
   This is only a first step towards full isolation from the host; for
   example, the CPU register state and DMA accesses are not yet isolated.
   Because this does not really yet bring fully what it promises, it is
   hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and
   also triggers TAINT_USER when a VM is created.  Caveat emptor.
 
 - Rework the dreaded user_mem_abort() function to make it more
   maintainable, reducing the amount of state being exposed to the
   various helpers and rendering a substantial amount of state immutable.
 
 - Expand the Stage-2 page table dumper to support NV shadow page tables
   on a per-VM basis.
 
 - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow.
 
 - Fix both SPE and TRBE in non-VHE configurations so that they do not
   generate spurious, out of context table walks that ultimately lead
   to very bad HW lockups.
 
 - A small set of patches fixing the Stage-2 MMU freeing in error cases.
 
 - Tighten-up accepted SMC immediate value to be only #0 for host
   SMCCC calls.
 
 - The usual cleanups and other selftest churn.
 
 LoongArch:
 
 - Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel().
 
 - Add DMSINTC irqchip in kernel support.
 
 RISC-V:
 
 - Fix steal time shared memory alignment checks
 
 - Fix vector context allocation leak
 
 - Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
 
 - Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
 
 - Fix integer overflow in kvm_pmu_validate_counter_mask()
 
 - Fix shift-out-of-bounds in make_xfence_request()
 
 - Fix lost write protection on huge pages during dirty logging
 
 - Split huge pages during fault handling for dirty logging
 
 - Skip CSR restore if VCPU is reloaded on the same core
 
 - Implement kvm_arch_has_default_irqchip() for KVM selftests
 
 - Factored-out ISA checks into separate sources
 
 - Added hideleg to struct kvm_vcpu_config
 
 - Factored-out VCPU config into separate sources
 
 - Support configuration of per-VM HGATP mode from KVM user space
 
 s390:
 
 - Support for ESA (31-bit) guests inside nested hypervisors.
 
 - Remove restriction on memslot alignment, which is not needed anymore with
   the new gmap code.
 
 - Fix LPSW/E to update the bear (which of course is the breaking event
   address register).
 
 x86:
 
 - Shut up various UBSAN warnings on reading module parameter before they
   were initialized.
 
 - Don't zero-allocate page tables that are used for splitting hugepages in
   the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and
   thus write all bytes.
 
 - As an optimization, bail early when trying to unsync 4KiB mappings if the
   target gfn can just be mapped with a 2MiB hugepage.
 
 x86 generic:
 
 - Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely
   struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM
   would dereference stack pointer after an exit to userspace.
 
 - Clean up and comment the emulated MMIO code to try to make it easier to
   maintain (not necessarily "easy", but "easier").
 
 - Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX
   and SVM enabling) as it is needed for trusted I/O.
 
 - Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
 
 - Immediately fail the build if a required #define is missing in one of
   KVM's headers that is included multiple times.
 
 - Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
   exception, mostly to prevent syzkaller from abusing the uAPI to
   trigger WARNs, but also because it can help prevent userspace from
   unintentionally crashing the VM.
 
 - Exempt SMM from CPUID faulting on Intel, as per the spec.
 
 - Misc hardening and cleanup changes.
 
 x86 (AMD):
 
 - Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU
   so that KVM doesn't prematurely re-enable AVIC if multiple
   vCPUs have to-be-injected IRQs.
 
 - Clean up and optimize the OSVW handling, avoiding a bug in which KVM would
   overwrite state when enabling virtualization on multiple CPUs in parallel.
   This should not be a problem because OSVW should usually be the same for
   all CPUs.
 
 - Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a
   "too large" size based purely on user input.
 
 - Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION.
 
 - Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as
   doing so for an SNP guest will crash the host due to an RMP violation
   page fault.
 
 - Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries
   are required to hold kvm->lock, and enforce it by lockdep.  Fix various
   bugs where sev_guest() was not ensured to be stable for the whole
   duration of a function or ioctl.
 
 - Convert a pile of kvm->lock SEV code to guard().
 
 - Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD,
   for which KVM needs to set CR2 and DR6 as a response to ioctls such as
   KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2
   rather than CR2, for example).  Only set CR2 and DR6 when consumption of
   the payload is imminent, but on the other hand force delivery of the
   payload in all paths where userspace retrieves CR2 or DR6.
 
 - Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead
   of vmcb02->save.cr2.  The value is out of sync after a save/restore
   or after a #PF is injected into L2.
 
 - Fix a class of nSVM bugs where some fields written by the CPU are not
   synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not
   up-to-date when saved by KVM_GET_NESTED_STATE.
 
 - Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and
   KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after
   save+restore.
 
 - Add a variety of missing nSVM consistency checks.
 
 - Fix several bugs where KVM failed to correctly update VMCB fields on
   nested #VMEXIT.
 
 - Fix several bugs where KVM failed to correctly synthesize #UD or #GP for
   SVM-related instructions.
 
 - Add support for save+restore of virtualized LBRs (on SVM).
 
 - Refactor various helpers and macros to improve clarity and (hopefully)
   make the code easier to maintain.
 
 - Aggressively sanitize fields when copying from vmcb12, to guard against
   unintentionally allowing L1 to utilize yet-to-be-defined features.
 
 - Fix several bugs where KVM botched rAX legality checks when emulating SVM
   instructions.  There are remaining issues in that KVM doesn't handle size
   prefix overrides for 64-bit guests.
 
 - Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of
   somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's
   architectural but sketchy behavior of generating #GP for "unsupported"
   addresses).
 
 - Cache all used vmcb12 fields to further harden against TOCTOU bugs.
 
 x86 (Intel):
 
 - Drop obsolete branch hint prefixes from the VMX instruction macros.
 
 - Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
   register input when appropriate.
 
 - Code cleanups.
 
 guest_memfd:
 
 - Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support
   reclaim, the memory is unevictable, and there is no storage to write
   back to.
 
 LoongArch selftests:
 
 - Add KVM PMU test cases
 
 s390 selftests:
 
 - Enable more memory selftests.
 
 x86 selftests:
 
 - Add support for Hygon CPUs in KVM selftests.
 
 - Fix a bug in the MSR test where it would get false failures on AMD/Hygon
   CPUs with exactly one of RDPID or RDTSCP.
 
 - Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a
   bug where the kernel would attempt to collapse guest_memfd folios against
   KVM's will.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnftRQUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPAzwf+NKO4Ktv+7A22ImN0SBl0nlUuulsz
 vTcw3+hxdRoIw83GdNS+hG5js0wrpMDnbv3t4+VliDNBSSxrBzcSWX2wpilW0Xtw
 qGo1MWhs2lKPy1NlaRVOwPS6j7uF3AR0TQ1iQLGMedQuCU9WpiKJxyhNXJdbLrt3
 8EgFzsvtEsv+jKNRUNDf9+d0j4gZsFyIe+Brhianbw+u3/UCiUClLCdsKPc4+5ZX
 08otYXytacGNIf/5Ev1vT4pHkHL0yqKXAtX7LEtaS3+0KrPuLjV4slemivzE9vf5
 Evafm5AhA4wpaNMb1ZerhY3T94lsMaJpWxotjR//0Q7C9B59pCQnXCm8mg==
 =CcE0
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "Arm:

   - Add support for tracing in the standalone EL2 hypervisor code,
     which should help both debugging and performance analysis. This
     uses the new infrastructure for 'remote' trace buffers that can be
     exposed by non-kernel entities such as firmware, and which came
     through the tracing tree

   - Add support for GICv5 Per Processor Interrupts (PPIs), as the
     starting point for supporting the new GIC architecture in KVM

   - Finally add support for pKVM protected guests, where pages are
     unmapped from the host as they are faulted into the guest and can
     be shared back from the guest using pKVM hypercalls. Protected
     guests are created using a new machine type identifier. As the
     elusive guestmem has not yet delivered on its promises, anonymous
     memory is also supported

     This is only a first step towards full isolation from the host; for
     example, the CPU register state and DMA accesses are not yet
     isolated. Because this does not really yet bring fully what it
     promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
     'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
     created. Caveat emptor

   - Rework the dreaded user_mem_abort() function to make it more
     maintainable, reducing the amount of state being exposed to the
     various helpers and rendering a substantial amount of state
     immutable

   - Expand the Stage-2 page table dumper to support NV shadow page
     tables on a per-VM basis

   - Tidy up the pKVM PSCI proxy code to be slightly less hard to
     follow

   - Fix both SPE and TRBE in non-VHE configurations so that they do not
     generate spurious, out of context table walks that ultimately lead
     to very bad HW lockups

   - A small set of patches fixing the Stage-2 MMU freeing in error
     cases

   - Tighten-up accepted SMC immediate value to be only #0 for host
     SMCCC calls

   - The usual cleanups and other selftest churn

  LoongArch:

   - Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()

   - Add DMSINTC irqchip in kernel support

  RISC-V:

   - Fix steal time shared memory alignment checks

   - Fix vector context allocation leak

   - Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()

   - Fix double-free of sdata in kvm_pmu_clear_snapshot_area()

   - Fix integer overflow in kvm_pmu_validate_counter_mask()

   - Fix shift-out-of-bounds in make_xfence_request()

   - Fix lost write protection on huge pages during dirty logging

   - Split huge pages during fault handling for dirty logging

   - Skip CSR restore if VCPU is reloaded on the same core

   - Implement kvm_arch_has_default_irqchip() for KVM selftests

   - Factored-out ISA checks into separate sources

   - Added hideleg to struct kvm_vcpu_config

   - Factored-out VCPU config into separate sources

   - Support configuration of per-VM HGATP mode from KVM user space

  s390:

   - Support for ESA (31-bit) guests inside nested hypervisors

   - Remove restriction on memslot alignment, which is not needed
     anymore with the new gmap code

   - Fix LPSW/E to update the bear (which of course is the breaking
     event address register)

  x86:

   - Shut up various UBSAN warnings on reading module parameter before
     they were initialized

   - Don't zero-allocate page tables that are used for splitting
     hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
     the page table and thus write all bytes

   - As an optimization, bail early when trying to unsync 4KiB mappings
     if the target gfn can just be mapped with a 2MiB hugepage

  x86 generic:

   - Copy single-chunk MMIO write values into struct kvm_vcpu (more
     precisely struct kvm_mmio_fragment) to fix use-after-free stack
     bugs where KVM would dereference stack pointer after an exit to
     userspace

   - Clean up and comment the emulated MMIO code to try to make it
     easier to maintain (not necessarily "easy", but "easier")

   - Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
     VMX and SVM enabling) as it is needed for trusted I/O

   - Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions

   - Immediately fail the build if a required #define is missing in one
     of KVM's headers that is included multiple times

   - Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
     exception, mostly to prevent syzkaller from abusing the uAPI to
     trigger WARNs, but also because it can help prevent userspace from
     unintentionally crashing the VM

   - Exempt SMM from CPUID faulting on Intel, as per the spec

   - Misc hardening and cleanup changes

  x86 (AMD):

   - Fix and optimize IRQ window inhibit handling for AVIC; make it
     per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
     vCPUs have to-be-injected IRQs

   - Clean up and optimize the OSVW handling, avoiding a bug in which
     KVM would overwrite state when enabling virtualization on multiple
     CPUs in parallel. This should not be a problem because OSVW should
     usually be the same for all CPUs

   - Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
     about a "too large" size based purely on user input

   - Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION

   - Disallow synchronizing a VMSA of an already-launched/encrypted
     vCPU, as doing so for an SNP guest will crash the host due to an
     RMP violation page fault

   - Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
     queries are required to hold kvm->lock, and enforce it by lockdep.
     Fix various bugs where sev_guest() was not ensured to be stable for
     the whole duration of a function or ioctl

   - Convert a pile of kvm->lock SEV code to guard()

   - Play nicer with userspace that does not enable
     KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
     as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
     payload would end up in EXITINFO2 rather than CR2, for example).
     Only set CR2 and DR6 when consumption of the payload is imminent,
     but on the other hand force delivery of the payload in all paths
     where userspace retrieves CR2 or DR6

   - Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
     instead of vmcb02->save.cr2. The value is out of sync after a
     save/restore or after a #PF is injected into L2

   - Fix a class of nSVM bugs where some fields written by the CPU are
     not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
     are not up-to-date when saved by KVM_GET_NESTED_STATE

   - Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
     and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
     initialized after save+restore

   - Add a variety of missing nSVM consistency checks

   - Fix several bugs where KVM failed to correctly update VMCB fields
     on nested #VMEXIT

   - Fix several bugs where KVM failed to correctly synthesize #UD or
     #GP for SVM-related instructions

   - Add support for save+restore of virtualized LBRs (on SVM)

   - Refactor various helpers and macros to improve clarity and
     (hopefully) make the code easier to maintain

   - Aggressively sanitize fields when copying from vmcb12, to guard
     against unintentionally allowing L1 to utilize yet-to-be-defined
     features

   - Fix several bugs where KVM botched rAX legality checks when
     emulating SVM instructions. There are remaining issues in that KVM
     doesn't handle size prefix overrides for 64-bit guests

   - Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
     instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
     down on AMD's architectural but sketchy behavior of generating #GP
     for "unsupported" addresses)

   - Cache all used vmcb12 fields to further harden against TOCTOU bugs

  x86 (Intel):

   - Drop obsolete branch hint prefixes from the VMX instruction macros

   - Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
     register input when appropriate

   - Code cleanups

  guest_memfd:

   - Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
     support reclaim, the memory is unevictable, and there is no storage
     to write back to

  LoongArch selftests:

   - Add KVM PMU test cases

  s390 selftests:

   - Enable more memory selftests

  x86 selftests:

   - Add support for Hygon CPUs in KVM selftests

   - Fix a bug in the MSR test where it would get false failures on
     AMD/Hygon CPUs with exactly one of RDPID or RDTSCP

   - Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
     for a bug where the kernel would attempt to collapse guest_memfd
     folios against KVM's will"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
  KVM: x86: use inlines instead of macros for is_sev_*guest
  x86/virt: Treat SVM as unsupported when running as an SEV+ guest
  KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
  KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
  KVM: SEV: use mutex guard in snp_handle_guest_req()
  KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
  KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
  KVM: SEV: use mutex guard in snp_launch_update()
  KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
  KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
  KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
  KVM: SEV: WARN on unhandled VM type when initializing VM
  KVM: LoongArch: selftests: Add PMU overflow interrupt test
  KVM: LoongArch: selftests: Add basic PMU event counting test
  KVM: LoongArch: selftests: Add cpucfg read/write helpers
  LoongArch: KVM: Add DMSINTC inject msi to vCPU
  LoongArch: KVM: Add DMSINTC device support
  LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
  LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
  LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
  ...
2026-04-17 07:18:03 -07:00
Ralf Lici
6c9b1dc218 selftests: ovpn: serialize YNL listener startup
Starting one background YNL notification listener per peer back-to-back
can intermittently stall the test setup before the listeners even reach
the Python main function.

This was reproducible in a reduced test.sh setup-only loop: a single
listener stayed stable across repeated runs, while starting listeners
for all peers could hang early in the listener launch phase. Adding a
short delay between listener launches makes the listeners start cleanly
and eliminates the reproduced hangs in repeated normal and slow-runner
tests.

Serialize listener startup with a small sleep between setup_listener
calls.

Fixes: 77de28cd7c ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2026-04-17 10:54:04 +02:00
Ralf Lici
1be93bb979 selftests: ovpn: align command flow with TAP
Current tests do not properly adhere to the TAP infrastructure
therefore they do not properly report failures leading to hangs of
the CI machinery.

Restructure ovpn selftests into using the TAP infrastructure: split each
test in stages, execute stage bodies with fail-fast semantics, and emit
KTAP pass/fail for each stage.

Centralize behavior control in common.sh and makes the scripts use
dedicated wrappers for required-success, expected-failure, and non-fatal
commands. Also add the OVPN_VERBOSE mode that exposes captured command
output for debugging.
This way tests won't hang anymore in case of failure when executed
within the CI machinery.

This change also makes default OVPN_CLI and YNL resolution
independent from the caller CWD by anchoring both to COMMON_DIR, so
behavior is stable across direct execution and run_tests-style
execution.

Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2026-04-17 10:54:03 +02:00
Ralf Lici
7c29665a3a selftests: ovpn: add prefix to helpers and shared variables
Current naming for shared variables, helpers and netnamespaces is
a bit unfortunate as it doesn't come with a clean prefix.
This showed to be problematic in case of name clashes with external
scripts or in case of abrupt test termination (hanging netns' weren't
easily reconducible to ovpn).

Rename common helper entry points and all shared globals in the ovpn
selftests to ovpn_ or OVPN_ names so test scripts and wrappers use a
single explicit prefix. Also rename the temporary network namespaces
created by the tests from peerN to ovpn_peerN. This makes leaked
namespaces easier to identify.

This is a mechanical refactor only, behavior is unchanged.

Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2026-04-17 10:54:03 +02:00
Ralf Lici
222e7f8d1c selftests: ovpn: flatten slurped notification JSON before filtering
Notification comparison uses jq -s, which slurps all inputs into an
array. Some inputs can be arrays themselves, and applying the .msg.peer
filter directly on those entries triggers jq type errors.

Expand any array-valued JSON items returned by jq -s before selecting
.msg.peer, so the filter handles both normal notification objects and []
entries without type errors.

Fixes: 77de28cd7c ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2026-04-17 10:54:03 +02:00
Ralf Lici
c409da0fe1 selftests: ovpn: fail notification check on mismatch
compare_ntfs doesn't fail when expected and received notification
streams diverge.

Fix this bug by tracking the diff exit status explicitly and return it
to the caller so notification mismatches propagate as test failures.

Fixes: 77de28cd7c ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2026-04-17 10:54:03 +02:00
Ralf Lici
e5fd34ab8d selftests: ovpn: add nftables config dependencies for test-mark
test-mark.sh installs nftables rules in an inet/filter output chain and
verifies packet drops via nft counters. In vmksft this can fail when the
nftables core is not enabled by the ovpn selftest config.

Add the missing kernel options required by this test:
- CONFIG_NETFILTER
- CONFIG_NF_TABLES
- CONFIG_NF_TABLES_INET

Fixes: 7b80d8a335 ("selftests: ovpn: add test for the FW mark feature")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260319124114.42f91f72@kernel.org/
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2026-04-17 10:54:03 +02:00
Linus Torvalds
440d6635b2 mm.git review status for linus..mm-nonmm-stable
Total patches:       126
 Reviews/patch:       0.92
 Reviewed rate:       76%
 
 - The 2 patch series "pid: make sub-init creation retryable" from Oleg
   Nesterov increases the robustness of our creation of init in a new
   namespace.  By clearing away some historical cruft which is no longer
   needed.  Also some documentation fixups are provided.
 
 - The 2 patch series "selftests/fchmodat2: Error handling and general"
   from Mark Brown has a fixup and a cleanup for the fchmodat2() syscall
   selftest.
 
 - The 3 patch series "lib: polynomial: Move to math/ and clean up" from
   Andy Shevchenko does as advertised.
 
 - The 3 patch series "hung_task: Provide runtime reset interface for
   hung task detector" from Aaron Tomlin gives administrators the ability
   to zero out /proc/sys/kernel/hung_task_detect_count.
 
 - The 2 patch series "tools/getdelays: use the static UAPI headers from
   tools/include/uapi" from Thomas Weißschuh teaches getdelays to use the
   in-kernel UAPI headers rather than the system-provided ones.
 
 - The 5 patch series "watchdog/hardlockup: Improvements to hardlockup"
   from Mayank Rungta provides several cleanups and fixups to the
   hardlockup detector code and its documentation.
 
 - The 2 patch series "lib/bch: fix undefined behavior from signed
   left-shifts" from Josh Law provides a couple of small/theoretical fixes
   in the bch code.
 
 - The 2 patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()"
   from Junrui Luo does what is claims.
 
 - The 27 patch series "cleanup the RAID5 XOR library" from Christoph
   Hellwig is a quite far-reaching cleanup to this code.  I can't do better
   than to quote Christoph:
 
     The XOR library used for the RAID5 parity is a bit of a mess right
     now.  The main file sits in crypto/ despite not being cryptography and
     not using the crypto API, with the generic implementations sitting in
     include/asm-generic and the arch implementations sitting in an asm/
     header in theory.  The latter doesn't work for many cases, so
     architectures often build the code directly into the core kernel, or
     create another module for the architecture code.
 
     Change this to a single module in lib/ that also contains the
     architecture optimizations, similar to the library work Eric Biggers
     has done for the CRC and crypto libraries later.  After that it
     changes to better calling conventions that allow for smarter
     architecture implementations (although none is contained here yet),
     and uses static_call to avoid indirection function call overhead.
 
 - The 2 patch series "lib/list_sort: Clean up list_sort() scheduling
   workarounds" from Kuan-Wei Chiu cleans up this library code by removing
   a hacky thing which was added for UBIFS, which UBIFS doesn't actually
   need.
 
 - The 5 patch series "Fix bugs in extract_iter_to_sg()" from Christian
   Ehrhardt fixes a few bugs in the scatterlist code, adds in-kernel tests
   for the now-fixed bugs and fixes a leak in the test itself.
 
 - The 3 patch series "kdump: Enable LUKS-encrypted dump target support
   in ARM64 and PowerPC" from Coiby Xu eenables support of the
   LUKS-encrypted device dump target on arm64 and powerpc.
 
 - The 4 patch series "ocfs2: consolidate extent list validation into
   block read callbacks" from Joseph Qi addresses ocfs2's validation of
   extent list fields - cleanup, simplification, robustness.  (Kernel test
   robot loves mounting corrupted fs images!)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad90rQAKCRDdBJ7gKXxA
 jl7rAQD4/Rq7ZSSnEv6FS4gOwc3MgTdWcZZaXkqL1KiWyYhRwAEA+cVCO344+AKb
 znBOjet/hUr+/kBwyViifiC8LHzchwM=
 =Nfnf
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - "pid: make sub-init creation retryable" (Oleg Nesterov)

   Make creation of init in a new namespace more robust by clearing away
   some historical cruft which is no longer needed. Also some
   documentation fixups

 - "selftests/fchmodat2: Error handling and general" (Mark Brown)

   Fix and a cleanup for the fchmodat2() syscall selftest

 - "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)

 - "hung_task: Provide runtime reset interface for hung task detector"
   (Aaron Tomlin)

   Give administrators the ability to zero out
   /proc/sys/kernel/hung_task_detect_count

 - "tools/getdelays: use the static UAPI headers from
   tools/include/uapi" (Thomas Weißschuh)

   Teach getdelays to use the in-kernel UAPI headers rather than the
   system-provided ones

 - "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)

   Several cleanups and fixups to the hardlockup detector code and its
   documentation

 - "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)

   A couple of small/theoretical fixes in the bch code

 - "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)

 - "cleanup the RAID5 XOR library" (Christoph Hellwig)

   A quite far-reaching cleanup to this code. I can't do better than to
   quote Christoph:

     "The XOR library used for the RAID5 parity is a bit of a mess right
      now. The main file sits in crypto/ despite not being cryptography
      and not using the crypto API, with the generic implementations
      sitting in include/asm-generic and the arch implementations
      sitting in an asm/ header in theory. The latter doesn't work for
      many cases, so architectures often build the code directly into
      the core kernel, or create another module for the architecture
      code.

      Change this to a single module in lib/ that also contains the
      architecture optimizations, similar to the library work Eric
      Biggers has done for the CRC and crypto libraries later. After
      that it changes to better calling conventions that allow for
      smarter architecture implementations (although none is contained
      here yet), and uses static_call to avoid indirection function call
      overhead"

 - "lib/list_sort: Clean up list_sort() scheduling workarounds"
   (Kuan-Wei Chiu)

   Clean up this library code by removing a hacky thing which was added
   for UBIFS, which UBIFS doesn't actually need

 - "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)

   Fix a few bugs in the scatterlist code, add in-kernel tests for the
   now-fixed bugs and fix a leak in the test itself

 - "kdump: Enable LUKS-encrypted dump target support in ARM64 and
   PowerPC" (Coiby Xu)

   Enable support of the LUKS-encrypted device dump target on arm64 and
   powerpc

 - "ocfs2: consolidate extent list validation into block read callbacks"
   (Joseph Qi)

   Cleanup, simplify, and make more robust ocfs2's validation of extent
   list fields (Kernel test robot loves mounting corrupted fs images!)

* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
  ocfs2: validate group add input before caching
  ocfs2: validate bg_bits during freefrag scan
  ocfs2: fix listxattr handling when the buffer is full
  doc: watchdog: fix typos etc
  update Sean's email address
  ocfs2: use get_random_u32() where appropriate
  ocfs2: split transactions in dio completion to avoid credit exhaustion
  ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
  ocfs2: validate extent block list fields during block read
  ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
  ocfs2: validate dx_root extent list fields during block read
  ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
  ocfs2: handle invalid dinode in ocfs2_group_extend
  .get_maintainer.ignore: add Askar
  ocfs2: validate bg_list extent bounds in discontig groups
  checkpatch: exclude forward declarations of const structs
  tools/accounting: handle truncated taskstats netlink messages
  taskstats: set version in TGID exit notifications
  ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
  arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
  ...
2026-04-16 20:11:56 -07:00
Jakub Kicinski
82c2106902 selftests: net: add missing CMAC to tcp_ao config
Recent changes to crypto and wifi made CMAC no longer
selected by default on x86 and tcp_ao needs it.
Add the missing config.

Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260416010439.1053587-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-16 19:35:43 -07:00
Yihan Ding
4198ff31ed selftests/bpf: cover UTF-8 trace_printk output
Extend trace_printk coverage to verify that UTF-8 literal text is
emitted successfully and that '%' parsing still rejects non-ASCII
bytes once format parsing starts.

Use an explicitly invalid format string for the negative case so the
ASCII-only parser expectation is visible from the test code itself.

Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-3-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-04-16 15:53:32 -07:00
Yihan Ding
b960430ea8 bpf: allow UTF-8 literals in bpf_bprintf_prepare()
bpf_bprintf_prepare() only needs ASCII parsing for conversion
specifiers. Plain text can safely carry bytes >= 0x80, so allow
UTF-8 literals outside '%' sequences while keeping ASCII control
bytes rejected and format specifiers ASCII-only.

This keeps existing parsing rules for format directives unchanged,
while allowing helpers such as bpf_trace_printk() to emit UTF-8
literal text.

Update test_snprintf_negative() in the same commit so selftests keep
matching the new plain-text vs format-specifier split during bisection.

Fixes: 48cac3f4a9 ("bpf: Implement formatted output helpers with bstr_printf")
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-2-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-04-16 15:53:32 -07:00
Mykyta Yatsenko
fcd11ff8bd selftests/bpf: Reject scalar store into kptr slot
Verify that the verifier rejects a direct scalar write to a kptr map
value slot without crashing.

Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260416-kptr_crash-v1-2-5589356584b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-04-16 15:20:27 -07:00
Mark Brown
df410ad40c selftests: Fix runner.sh for non-bash shells
Commit 2964f6b816 ("selftests: Use ktap helpers for runner.sh") added a
number of bashisms and updated the interpreter specified for the script to
be /bin/bash to reflect this. Unfortunately this does not actually achieve
anything in production since the main way runner.sh is invoked is from the
top level run_kselftest.sh which sources it rather than running it as a
separate script and specifies the shell as /bin/sh. This means that on
systems where /bin/sh is not bash (such as Debian where /bin/sh defaults to
being dash) we see failures:

./run_kselftest.sh: 195: ./kselftest/runner.sh: Syntax error: "(" unexpected (expecting "}")

These bashisms come from this part of the change:

  4. In runner.sh run_one(), get the return value and use ktap helpers for
     all pass/fail reporting. This allows counting pass/fail numbers in the
     main process.

which uses a bash array to track all the subtests being run. Convert this
to use a simple flat variable instead.

Link: https://lore.kernel.org/r/20260416-selftest-fix-readlink-e-v1-2-94e4cabbdec4@kernel.org
Fixes: 2964f6b816 ("selftests: Use ktap helpers for runner.sh")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2026-04-16 15:17:32 -06:00
Mark Brown
93edbf1782 selftests: Fix runner.sh busybox support
Commit 2964f6b816 ("selftests: Use ktap helpers for runner.sh") added an
import of ktap_helper.sh to runner.sh in order to standardise on these for
output formatting. Rather than build on the existing requirement for the
user to supply BASE_DIR to find the helpers it uses some magic which
features a use of "readlink -e". Unfortunately the -e option is a GNU
extension and is not available in at least busybox, meaning that runner.sh
starts failing:

./run_kselftest.sh: 5: ./kselftest/runner.sh: Bad substitution
./run_kselftest.sh: 5: .: cannot open ./ktap_helpers.sh: No such file

Fix this by using the already required BASE_DIR to locate the helper
library.

Link: https://lore.kernel.org/r/20260416-selftest-fix-readlink-e-v1-1-94e4cabbdec4@kernel.org
Fixes: 2964f6b816 ("selftests: Use ktap helpers for runner.sh")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2026-04-16 15:04:13 -06:00
Mark Brown
cad6f32665 selftests: Deescalate error reporting
Commit 7e47389142 ("selftests: Preserve subtarget failures in
all/install") updated the propagation of errors from indivdual kselftest
targets to be similar to that seen with FORCE_TARGETS.  While it would
be really nice to be in a position to do this currently it is premature
to do this as the default behaviour.

At present we default to trying to build all selftests but a combination
of code quality issues and build dependencies mean that it is almost
certain that at least one of them will fail to build (for example,
several depend on clang so don't work in a GCC container) and a top
level failure in the kselftest build reported.  Further, the resulting
failures mean that the install target does not run at all so any build
problem is escallated to a complete failure to produce a kselftest
tarball so CI systems that run into issues loose all selftests coverage.
This has been causing disruption to a range of CI systems including
KernelCI, mine and Arm's internal one.

Revert the commit, users who need this behaviour should be able to use
FORCE_TARGETS for the time being.  At present users that do this (such
as linux-next) are most likely building a subset of targets known to
succeed in their environments.

Link: https://lore.kernel.org/r/20260416-selftests-deescalate-error-reporting-v1-1-38e7c0536227@kernel.org
Fixes: 7e47389142 ("selftests: Preserve subtarget failures in all/install")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2026-04-16 15:04:00 -06:00
Linus Torvalds
d3d9443f8b livepatching changes for 7.1
-----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmngn2gbFIAAAAAABAAO
 bWFudTIsMi41KzEuMTIsMiwyAAoJEFKgDEdIgJTy/NsQAKAVn3c9G6RTFaU+cVZ6
 gtcrXd7LR4MW7mgPcK1407tyJN803b92yqk9Ob+Ase2JmqF/M4kNnWk0eLrIYHQ2
 5of4QcoH3p0GoM0CkXsY1IUfSYcBLzb1d+Yjc/sA0PWsYJul/74PPkmflouORi+t
 rwbNXhlUJOFZd32lHvL5CA8wWlk9MundcNconIy2knVbFJodSS7irlakfXQwiQaF
 vyZ9DOt2AtHO8jDuaMhuj7e+Gm44luDarv+YRXASlFUUhb+OBAfb8m+jGQJAvZmc
 ZjKBEt8nFdHH7BbRBm8VizP4dbN7U0lE2gMg5qnqFcyeD6iTmv4A+PstO/rKvg1F
 n7Jwwtu7Nc0J43NF0wdIJrRUR8y9UdTIlKJWXBHYSOOg51oFm7EWjCgkVXoVsZzf
 l244IFz8oboTY/zmcCDOjlhTS/RAubbcjiH5Xg/1c3/weoIPOB2Q55HLgVy2Pul8
 1lBFkrcVEWG4IWHsAXqsGk1mD4h9u4adbFYG7bj+B5ok/bTZMzTtZ4MAg2dUInP0
 H1VTqh72Hw1KcdVwDiMRJKpTpf6r84/ulQWpVBf+1mfLUPdFnhUQHsy334aRKXjY
 cLzp/fGuFc6FL5e28jEDCvaJNpkCpRfgykT8xuEtqCO1gvQZ/nFYgoCm0ENs3Dcz
 VBg+5E0ELVjGm9HcEZ+TUSRi
 =KJTH
 -----END PGP SIGNATURE-----

Merge tag 'livepatching-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Add two new selftests

* tag 'livepatching-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  selftests/livepatch: add test for module function patching
  selftests: livepatch: test-ftrace: livepatch a traced function
2026-04-16 08:13:27 -07:00
Linus Torvalds
f0bf3eac92 VFIO updates for v7.1-rc1
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices.
    (Vijay Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
 
  - Fix vfio selftest MMIO DMA mapping selftest. (Alex Mastro)
 
  - Conversions to const struct class in support of class_create()
    deprecation. (Jori Koolstra)
 
  - Improve selftest compiler compatibility by avoiding initializer
    on variable-length array. (Manish Honap)
 
  - Define new uAPI for drivers supporting migration to advise user-
    space of new initial data for reducing target startup latency.
    Implemented for mlx5 vfio-pci variant driver. (Yishai Hadas)
 
  - Enable vfio selftests on aarch64, not just cross-compiles reporting
    arm64. (Ted Logan)
 
  - Update vfio selftest driver support to include additional DSA
    devices. (Yi Lai)
 
  - Unconditionally include debugfs root pointer in vfio device struct,
    avoiding a build failure seen in hisi_acc variant driver without
    debugfs otherwise. (Arnd Bergmann)
 
  - Add support for the s390 ISM (Internal Shared Memory) device via
    a new variant driver.  The device is unique in the size of its BAR
    space (256TiB) and lack of mmap support. (Julian Ruess)
 
  - Enforce that vfio-pci drivers implement a name in their ops
    structure for use in sequestering SR-IOV VFs. (Alex Williamson)
 
  - Prune leftover group notifier code. (Paolo Bonzini)
 
  - Fix Xe vfio-pci variant driver to avoid migration support as a
    dependency in the reset path and missing release call.
    (Michał Winiarski)
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmnf/uURHGFsZXhAc2hh
 emJvdC5vcmcACgkQI5ubbjuwiyJJ3g//duXzgV39ShUQLh+m/IfdBypyLd2qIu7L
 u4vnQVm5Fnf5/MrMwTDC60U6GiXrM4eMm7wwsye+h28C7cFuv1pbgdb/ADfW87Mk
 q6SV7jvdmSu6XVHl4r9qdPx4qI6tBvmirGFlrWGIdVkZGVL0Ywn4tuZehL7o6Chr
 DAoQzmZpjkZtkSP6lmKSE5/cn1AAbNOvFNKpPsgHmrYn4uNQOQQjvy+8XqOWahT2
 qBvGYJggjaMZt/iXCPPf0j0a0YsGM0DZw3vEkkZD/jkrFoak0F1EhzeKRTyCoPZe
 6W1zsanNOWYvO/CWKPsav6r4J+5OL9tcqjOCIRgHiImErQZWvT8zcC5t+RPwYkTo
 mQWnAB7ybMalsw29d+AcKyfEHxvatW3X9qPkLCktKXZ+VgoqXNd74MVcobeOEBfh
 QD/vpMHS0duNik+QeeWxYYLTVWdqZdiaT0SQ89iGS1Vs+IYT+XareVvD/5pNUxDl
 +MpLAtvLDfci4D3iTJoq0XOK6k5WMs5p7bnOtmkuZhB5GbGUhdJeQsgX7eybCE0U
 kpIWsbjvtDm7vI61zTt/FnDHN4HqUc5Z759aE235aptlKD8AmKxdfOvgpdBtJ3Qb
 zBNbcUoLzIYJim0qYg+KFLXbfmtVTSkNvGROvgZsNPk4w/FJRyC5pcC/Y6TnQBf2
 H5Wqrdd3ZEs=
 =NYEM
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - Update QAT vfio-pci variant driver for Gen 5, 420xx devices (Vijay
   Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)

 - Fix vfio selftest MMIO DMA mapping selftest (Alex Mastro)

 - Conversions to const struct class in support of class_create()
   deprecation (Jori Koolstra)

 - Improve selftest compiler compatibility by avoiding initializer on
   variable-length array (Manish Honap)

 - Define new uAPI for drivers supporting migration to advise user-
   space of new initial data for reducing target startup latency.
   Implemented for mlx5 vfio-pci variant driver (Yishai Hadas)

 - Enable vfio selftests on aarch64, not just cross-compiles reporting
   arm64 (Ted Logan)

 - Update vfio selftest driver support to include additional DSA devices
   (Yi Lai)

 - Unconditionally include debugfs root pointer in vfio device struct,
   avoiding a build failure seen in hisi_acc variant driver without
   debugfs otherwise (Arnd Bergmann)

 - Add support for the s390 ISM (Internal Shared Memory) device via a
   new variant driver. The device is unique in the size of its BAR space
   (256TiB) and lack of mmap support (Julian Ruess)

 - Enforce that vfio-pci drivers implement a name in their ops structure
   for use in sequestering SR-IOV VFs (Alex Williamson)

 - Prune leftover group notifier code (Paolo Bonzini)

 - Fix Xe vfio-pci variant driver to avoid migration support as a
   dependency in the reset path and missing release call (Michał
   Winiarski)

* tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio: (23 commits)
  vfio/xe: Add a missing vfio_pci_core_release_dev()
  vfio/xe: Reorganize the init to decouple migration from reset
  vfio: remove dead notifier code
  vfio/pci: Require vfio_device_ops.name
  MAINTAINERS: add VFIO ISM PCI DRIVER section
  vfio/ism: Implement vfio_pci driver for ISM devices
  vfio/pci: Rename vfio_config_do_rw() to vfio_pci_config_rw_single() and export it
  vfio: unhide vdev->debug_root
  vfio/qat: add support for Intel QAT 420xx VFs
  vfio: selftests: Support DMR and GNR-D DSA devices
  vfio: selftests: Build tests on aarch64
  vfio/mlx5: Add REINIT support to VFIO_MIG_GET_PRECOPY_INFO
  vfio/mlx5: consider inflight SAVE during PRE_COPY
  net/mlx5: Add IFC bits for migration state
  vfio: Adapt drivers to use the core helper vfio_check_precopy_ioctl
  vfio: Add support for VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2
  vfio: Define uAPI for re-init initial bytes during the PRE_COPY phase
  vfio: selftests: Fix VLA initialisation in vfio_pci_irq_set()
  vfio: uapi: fix comment typo
  vfio: mdev: replace mtty_dev->vd_class with a const struct class
  ...
2026-04-16 08:01:16 -07:00
Jiayuan Chen
104f082f5e selftests: fib_nexthops: test stale has_v4 on nexthop replace
Add test cases that exercise the scenario where an IPv6 nexthop is
replaced with an IPv4 nexthop while being part of a group. The group's
has_v4 flag must be updated so that subsequent IPv6 route additions are
properly rejected.

Two cases are covered:
  1. Gateway nexthop replaced across families with an existing IPv6
     route on the group (rejected by fib6_check_nh_list).
  2. Blackhole nexthop replaced across families with no existing IPv6
     route on the group (fib6_check_nh_list returns early) — this is
     the path that triggers a NULL ptr deref without the kernel fix.

Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260413114522.147784-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-04-16 13:48:30 +02:00
Petr Mladek
448c0f8cb7 Merge branch 'for-7.1/module-function-test' into for-linus 2026-04-16 10:33:43 +02:00
Michal Luczaj
997b8483d4 selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
Updating a sockmap from a unix iterator prog may lead to a deadlock.
Piggyback on the original selftest.

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-3-2af6fe97918e@rbox.co
2026-04-15 17:22:55 -07:00
Eduard Zingerman
969fb456ff selftests/bpf: verify kallsyms entries for token-loaded subprograms
Add a test that loads an XDP program with a global subprogram using a
BPF token from a user namespace, then verifies that both the main
program and the subprogram appear in /proc/kallsyms.

This exercises the bpf_prog_kallsyms_add() path for subprograms and
would have caught the missing aux->token copy in bpf_jit_subprogs().

load_kallsyms_local() filters out kallsyms with zero addresses.
For a process with limited capabilities to read kallsym addresses the
following sysctl variables have to be set to zero:
- /proc/sys/kernel/perf_event_paranoid
- /proc/sys/kernel/kptr_restrict
Set these variables using sysctl_set() utility function extracted from
unpriv_bpf_disabled.c to a separate c/header.
Since the test modifies global system state, mark it as serial.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260415-subprog-token-fix-v4-2-9bd000e8b068@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-04-15 16:46:47 -07:00
Linus Torvalds
e4bf304f00 ring-buffer updates for 7.1:
- Add remote buffers for pKVM
 
   pKVM has a hypervisor component that is used to protect the guest from the
   host kernel. This hypervisor is a black box to the kernel as the kernel is
   to user space. The remote buffers are used to have a memory mapping
   between the hypervisor and the kernel where kernel may send commands to
   enable tracing within the hypervisor. Then the kernel will read this
   memory mapping just like user space can read the memory mapped ring buffer
   of the kernel tracing system.
 
   Since the hypervisor only has a single context, it doesn't need to worry
   about races between normal context, interrupt context and NMIs like the
   kernel does. The ring buffer it uses doesn't need to be as complex. The
   remote buffers are a simple version of the ring buffer that works in a
   single context. They are still per-CPU and use sub buffers. The data
   layout is the same as the kernel's ring buffer to share the same parsing.
 
   Currently, only ARM64 implements pKVM, but there's work to implement it
   also in x86. The remote buffer code is separated out from the ARM
   implementation so that it can be used in the future by x86.
 
   The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in the
   remote buffers of this tree.
 
 - Merge commit f35dbac694 ("ring-buffer: Fix to update per-subbuf entries of persistent ring buffer")`
 
   A fix was merged upstream that some new changes depended on. The upstream
   commit was merged into the ring buffer branch to fulfil the dependency.
 
 - Make the backup instance non reusable
 
   The backup instance is a copy of the persistent ring buffer so that the
   persistent ring buffer could start recording again without using the data
   from the previous boot. The backup isn't for normal tracing. It is made
   read-only, and after it is consumed, it is automatically removed.
 
 - Have backup copy persistent instance before it starts recording
 
   To allow the persistent ring buffer to start recording from the kernel
   command line commands, move the copy of the backup instance to before the
   the command line options start recording.
 
 - Report header_page overwrite field as "char" and not "int'
 
   The rust parser of the header_page file was triggering a warning when it
   defined the overwrite variable as "int" but it was only a single byte in
   size.
 
 - Fix memory barriers for the trace_buffer CPU mask
 
   When a CPU comes online, the bit is set to allow readers to know that the
   CPU buffer is allocated. The bit is set after the allocation is done, and
   a smp_wmb() is performed after the allocation and before the setting of
   the bit. But instead of adding a smp_rmb() to all readers, since once a
   buffer is created for a CPU it is not deleted if that CPU goes offline, so
   this allocation is almost always done at boot up before any readers exist.
 
   If for the unlikely case where a CPU comes online for the first time after
   the system boot has finished, send an IPI to all CPUs to force the
   smp_rmb() for each CPU.
 
 - Show clock function being used in debugging ring buffer data
 
   When the ring buffer checks are enabled and the ring buffer detects an
   inconsistency in the times of the invents, print out the clock being used
   when the error occurred. There was a very hard to hit bug that would
   happen every so often and it ended up being only triggered when the jiffies
   clock was being used. If the bug showed the clock being used, it would
   have been much easier to find the problem (which was an internal function
   was being traced which caused the clock accounting to go off).
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCad9S9xQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qpO8AQDwq2GKeups4aMfOjsUAXX9pIGWI9O1
 eerhmazgi1LJLQEAtKRNSddOj/7nOJ5hLillJH4uAQOnJBkAWtjlTSUnLg8=
 =HXkO
 -----END PGP SIGNATURE-----

Merge tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull ring-buffer updates from Steven Rostedt:

 - Add remote buffers for pKVM

   pKVM has a hypervisor component that is used to protect the guest
   from the host kernel. This hypervisor is a black box to the kernel as
   the kernel is to user space. The remote buffers are used to have a
   memory mapping between the hypervisor and the kernel where kernel may
   send commands to enable tracing within the hypervisor. Then the
   kernel will read this memory mapping just like user space can read
   the memory mapped ring buffer of the kernel tracing system.

   Since the hypervisor only has a single context, it doesn't need to
   worry about races between normal context, interrupt context and NMIs
   like the kernel does. The ring buffer it uses doesn't need to be as
   complex. The remote buffers are a simple version of the ring buffer
   that works in a single context. They are still per-CPU and use sub
   buffers. The data layout is the same as the kernel's ring buffer to
   share the same parsing.

   Currently, only ARM64 implements pKVM, but there's work to implement
   it also in x86. The remote buffer code is separated out from the ARM
   implementation so that it can be used in the future by x86.

   The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in
   the remote buffers of this tree.

 - Make the backup instance non reusable

   The backup instance is a copy of the persistent ring buffer so that
   the persistent ring buffer could start recording again without using
   the data from the previous boot. The backup isn't for normal tracing.
   It is made read-only, and after it is consumed, it is automatically
   removed.

 - Have backup copy persistent instance before it starts recording

   To allow the persistent ring buffer to start recording from the
   kernel command line commands, move the copy of the backup instance to
   before the the command line options start recording.

 - Report header_page overwrite field as "char" and not "int'

   The rust parser of the header_page file was triggering a warning when
   it defined the overwrite variable as "int" but it was only a single
   byte in size.

 - Fix memory barriers for the trace_buffer CPU mask

   When a CPU comes online, the bit is set to allow readers to know that
   the CPU buffer is allocated. The bit is set after the allocation is
   done, and a smp_wmb() is performed after the allocation and before
   the setting of the bit. But instead of adding a smp_rmb() to all
   readers, since once a buffer is created for a CPU it is not deleted
   if that CPU goes offline, so this allocation is almost always done at
   boot up before any readers exist.

   If for the unlikely case where a CPU comes online for the first time
   after the system boot has finished, send an IPI to all CPUs to force
   the smp_rmb() for each CPU.

 - Show clock function being used in debugging ring buffer data

   When the ring buffer checks are enabled and the ring buffer detects
   an inconsistency in the times of the invents, print out the clock
   being used when the error occurred. There was a very hard to hit bug
   that would happen every so often and it ended up being only triggered
   when the jiffies clock was being used. If the bug showed the clock
   being used, it would have been much easier to find the problem (which
   was an internal function was being traced which caused the clock
   accounting to go off).

* tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
  ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
  ring-buffer: Report header_page overwrite as char
  tracing: Allow backup to save persistent ring buffer before it starts
  tracing/Documentation: Add a section about backup instance
  tracing: Remove the backup instance automatically after read
  tracing: Make the backup instance non-reusable
  ring-buffer: Enforce read ordering of trace_buffer cpumask and buffers
  ring-buffer: Show what clock function is used on timestamp errors
  tracing: Check for undefined symbols in simple_ring_buffer
  tracing: load/unload page callbacks for simple_ring_buffer
  Documentation: tracing: Add tracing remotes
  tracing: selftests: Add trace remote tests
  tracing: Add a trace remote module for testing
  tracing: Introduce simple_ring_buffer
  ring-buffer: Export buffer_data_page and macros
  tracing: Add helpers to create trace remote events
  tracing: Add events/ root files to trace remotes
  tracing: Add events to trace remotes
  tracing: Add init callback to trace remotes
  tracing: Add non-consuming read to trace remotes
  ...
2026-04-15 15:59:46 -07:00
Linus Torvalds
f1d26d72f0 IOMMU Updates for Linux v7.1:
Including:
 
 	- Core:
 	  - Support for RISC-V IO-page-table format in generic iommupt
 	    code
 
 	- ARM-SMMU Updates:
 
 	  - Introduction of an "invalidation array" for SMMUv3, which enables
 	    future scalability work and optimisations for devices with a large
 	    number of SMMUv3 instances.
 
 	  - Update the conditions under which the SMMUv3 driver works around
 	    hardware errata for invalidation on MMU-700 implementations.
 
 	  - Fix broken command filtering for the host view of NVIDIA's "cmdqv"
 	    SMMUv3 extension.
 
 	  - MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi SoCs.
 
 	- Intel VT-d:
 
 	  - Support for dirty tracking on domains attached to PASID
 	  - Removal of unnecessary read*()/write*() wrappers
 	  - Improvements to the invalidation paths
 
 	- AMD Vi:
 
 	  - Race-condition fixed in debugfs code
 	  - Make log buffer allocation NUMA aware
 
 	- RISC-V:
 
 	  - IO-TLB flushing improvements
 	  - Minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmneJdAACgkQK/BELZcB
 GuO3TQ//cWG59NaY32ByWMJTug+DnlmunPG4xlUrD0JQCJXIcHrzKruhet4NifJL
 lE86+vN+s6I9EQgabmiDJPRZkZR20irDFMvuhfhVp8hprwxoan/fW7b4WY8Es0DM
 Q/AUioacyULBuKIl5XeEU1kAvKbgj2mlaWERTVKknh0jyItWwkEDvfR7G3eYIKDV
 dNhVjuow1byKnjrhE4Rslqz7HDalJVkDiADAdfbkV5+/HxqBJ19r84STW2YPkYLE
 ARIdwv3AI+NZfk9O0sBavMBs5v2nyNqr1j6kEiKd8hoFYOXY2Da1pWRSflTgFWil
 dYlXQZNGsznghBuc3VsqW75CMbSFtpWPx0LcQ0ClZUE11zxh+pfc1BekzvwHzunZ
 CTOcWastVkYHlvZTi3zHz68puy1omblN3r5juQhKOjQL+8N9BtRL4FObwj9XH8R0
 5Q9Fm2uWYr/1GCNZg0OvJNtQllxw8BTx/ssvof6sbq6P7OeT4cgErtqA9aQTdKuT
 6EvsW74GIllTNk2yuNHvQTpNWcW9iW7cEgwPaN/S5cXPZHZXhLjimOUGJkPmP3NY
 k2gcPAMkXi8MqC/gAr0kCDfxZPp5V8XWXI0lHd9qjxMvjZbLQlf0y6LArfA0hmQk
 oMzMJQuF81CK3+6fY4fXePOR5y0r+eWSCKYSr0HeXIH8eUvsrsY=
 =T6YT
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux

Pull iommu updates from Joerg Roedel:
 "Core:

   - Support for RISC-V IO-page-table format in generic iommupt code

  ARM-SMMU Updates:

   - Introduction of an "invalidation array" for SMMUv3, which enables
     future scalability work and optimisations for devices with a large
     number of SMMUv3 instances

   - Update the conditions under which the SMMUv3 driver works around
     hardware errata for invalidation on MMU-700 implementations

   - Fix broken command filtering for the host view of NVIDIA's "cmdqv"
     SMMUv3 extension

   - MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi
     SoCs

  Intel VT-d:

   - Support for dirty tracking on domains attached to PASID

   - Removal of unnecessary read*()/write*() wrappers

   - Improvements to the invalidation paths

  AMD Vi:

   - Race-condition fixed in debugfs code

   - Make log buffer allocation NUMA aware

  RISC-V:

   - IO-TLB flushing improvements

   - Minor fixes"

* tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
  iommu/vt-d: Restore IOMMU_CAP_CACHE_COHERENCY
  dt-bindings: arm-smmu: qcom: Add compatible for Hawi SoC
  iommu/amd: Invalidate IRT cache for DMA aliases
  iommu/riscv: Remove overflows on the invalidation path
  iommu/amd: Fix clone_alias() to use the original device's devid
  iommu/vt-d: Remove the remaining pages along the invalidation path
  iommu/vt-d: Pass size_order to qi_desc_piotlb() not npages
  iommu/vt-d: Split piotlb invalidation into range and all
  iommu/vt-d: Remove dmar_writel() and dmar_writeq()
  iommu/vt-d: Remove dmar_readl() and dmar_readq()
  iommufd/selftest: Test dirty tracking on PASID
  iommu/vt-d: Support dirty tracking on PASID
  iommu/vt-d: Rename device_set_dirty_tracking() and pass dmar_domain pointer
  iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
  iommu/dma: Always allow DMA-FQ when iommupt provides the iommu_domain
  iommu/riscv: Fix signedness bug
  iommu/amd: Fix illegal cap/mmio access in IOMMU debugfs
  iommu/amd: Fix illegal device-id access in IOMMU debugfs
  iommu/tegra241-cmdqv: Update uAPI to clarify HYP_OWN requirement
  iommu/tegra241-cmdqv: Set supports_cmd op in tegra241_vcmdq_hw_init()
  ...
2026-04-15 15:05:51 -07:00
Linus Torvalds
40286d6379 pci-v7.1-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmnfwfMUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxwIRAAlN1h5er8aFDbjON5YMXBZqlQmzaC
 bjlUHgwm7HkdErTFozyuqhE8QUO1kCm4uMQzeyJdfY9nRWqMDOuKYxMD5j0exk+o
 4tbbJg6Xx4dq7Qrawy9PhxyQm/PDAcvs+FRRlGala+qq9o3fxPDOAZVDE/1C8qFQ
 Jd7GGd7NZn/NN4xrqST4RQHjO8fwaMwmksWCStsb79kfesQWP6kLADGfIMcWxNUB
 2s+oTnK6Hw0tkBv56n6i8mbb0EzS3/RN1daTevGAta1rmfUVVtWGRZ4paMvv0Owi
 Rl5+O5Jz6/c1qiXZbUqu5CRQPIy7Dr3JPvURcZX6qbsV8PzWXZr0Wi+geWefGOnp
 55y+3OT0vdBGAuXLJhrcU7Clzq9D/TZOt8oTI8IFArUfDlmrAIdozPn7gr+VGre5
 QuKymSk3XWtyIbe4o8UeZ4f9g0y6ZY1XvtvB7K1tze+OOmqlkfq966+z8aZuGOKx
 ZvAU/NIat5H02EgB4dEVOP8R5vPZlXGT0RLGl1JWRypPWyZDbVVA3z927qRQG5md
 IsVq8WaIrB1zyl9g37lZeEaYwP/qCIQsHkMGPYcP4wdOQEV9AQqi5pmjMXnWyQJD
 PR1nvmTKW7USRCJ+pz8xPhZh0cj3ENaddORTD3I/0CGVV0y452bU/5rr4T+K04bK
 PCJBpxTIDuWDwXc=
 =FFRz
 -----END PGP SIGNATURE-----

Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
     P)

   - Enable AtomicOps only if we know the Root Port supports them (Gerd
     Bayer)

   - Don't enable AtomicOps for RCiEPs since none of them need Atomic
     Ops and we can't tell whether the Root Complex would support them
     (Gerd Bayer)

   - Leave Precision Time Measurement disabled until a driver enables it
     to avoid PCIe errors (Mika Westerberg)

   - Make pci_set_vga_state() fail if bridge doesn't support VGA
     routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
     errors to vga_get() callers including userspace via
     /dev/vga_arbiter (Simon Richter)

   - Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
     rzg3s drivers (where the actual controller constraints are known),
     and remove validation from the generic OF DT accessor (Hans Zhang)

   - Remove pc110pad driver (no longer useful after 486 CPU support
     removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
     Torokhov, Heiner Kallweit)

  Resource management:

   - Prevent assigning space to unimplemented bridge windows; previously
     we mistakenly assumed prefetchable window existed and assigned
     space and put a BAR there (Ahmed Naseef)

   - Avoid shrinking bridge windows to fit in the initial Root Port
     window; fixes one problem with devices with large BARs connected
     via switches, e.g., Thunderbolt (Ilpo Järvinen)

   - Pass full extent of empty space, not just the aligned space, to
     resource_alignf callback so free space before the requested
     alignment can be used (Ilpo Järvinen)

   - Place small resources before larger ones for better utilization of
     address space (Ilpo Järvinen)

   - Fix alignment calculation for resource size larger than align,
     e.g., bridge windows larger than the 1MB required alignment (Ilpo
     Järvinen)

  Reset:

   - Update slot handling so all ARI functions are treated as being in
     the same slot. They're all reset by Secondary Bus Reset, but
     previously drivers of ARI functions that appeared to be on a
     non-zero device weren't notified and fatal hardware errors could
     result (Keith Busch)

   - Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
     events (Keith Busch)

   - Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
     by CXL because it has no effect (Vidya Sagar)

   - Avoid FLR for AMD NPU device, where it causes the device to hang
     (Lizhi Hou)

  Error handling:

   - Clear only error bits in PCIe Device Status to avoid accidentally
     clearing Emergency Power Reduction Detected (Shuai Xue)

   - Check for AER errors even in devices without drivers (Lukas Wunner)

   - Initialize ratelimit info so DPC and EDR paths log AER error
     information (Kuppuswamy Sathyanarayanan)

  Power control:

   - Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
     generic pwrctrl driver can control it (Neil Armstrong)

  Hotplug:

   - Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
     doesn't complain when setting brightness fails because the endpoint
     is gone (Richard Cheng)

  Peer-to-peer DMA:

   - Allow wildcards in list of host bridges that support peer-to-peer
     DMA between hierarchy domains and add all Google SoCs (Jacob
     Moroni)

  Endpoint framework:

   - Advertise dynamic inbound mapping support in pci-epf-test and
     update host pci_endpoint_test to skip doorbell testing if not
     advertised by endpoint (Koichiro Den)

   - Return 0, not remaining timeout, when MHI eDMA ops complete so
     mhi_ep_ring_add_element() doesn't interpret non-zero as failure
     (Daniel Hodges)

   - Remove vntb and ntb duplicate resource teardown that leads to oops
     when .allow_link() fails or .drop_link() is called (Koichiro Den)

   - Disable vntb delayed work before clearing BAR mappings and
     doorbells to avoid oops caused by doing the work after resources
     have been torn down (Koichiro Den)

   - Add a way to describe reserved subregions within BARs, e.g.,
     platform-owned fixed register windows, and use it for the RK3588
     BAR4 DMA ctrl window (Koichiro Den)

   - Add BAR_DISABLED for BARs that will never be available to an EPF
     driver, and change some BAR_RESERVED annotations to BAR_DISABLED
     (Niklas Cassel)

   - Add NTB .get_dma_dev() callback for cases where DMA API requires a
     different device, e.g., vNTB devices (Koichiro Den)

   - Add reserved region types for MSI-X Table and PBA so Endpoint
     controllers can them as describe hardware-owned regions in a
     BAR_RESERVED BAR (Manikanta Maddireddy)

   - Make Tegra194/234 BAR0 programmable and remove 1MB size limit
     (Manikanta Maddireddy)

   - Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
     (Manikanta Maddireddy)

   - Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
     (Manikanta Maddireddy)

   - Skip the BAR subrange selftest if there are not enough inbound
     window resources to run the test (Christian Bruel)

  New native PCIe controller drivers:

   - Add DT binding and driver for Andes QiLai SoC PCIe host controller
     (Randolph Lin)

   - Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
     Zhang)

  Baikal T-1 PCIe controller driver:

   - Remove driver since it never quite became usable (Andy Shevchenko)

  Cadence PCIe controller driver:

   - Implement byte/word config reads with dword (32-bit) reads because
     some Cadence controllers don't support sub-dword accesses (Aksh
     Garg)

  CIX Sky1 PCIe controller driver:

   - Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)

  Freescale i.MX6 PCIe controller driver:

   - Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
     Zhu)

   - Delay instead of polling for L2/L3 Ready after PME_Turn_off when
     suspending i.MX6SX because LTSSM registers are inaccessible
     (Richard Zhu)

   - Separate PERST# assertion (for resetting endpoints) from core reset
     (for resetting the RC itself) to prepare for new DTs with PERST#
     GPIO in per-Root Port nodes (Sherry Sun)

   - Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
     MSI from downstream devices will work (Richard Zhu)

   - Fix i.MX95 reference clock source selection when internal refclk is
     used (Franz Schnyder)

  Freescale Layerscape PCIe controller driver:

   - Allow building as a removable module (Sascha Hauer)

  MediaTek PCIe Gen3 controller driver:

   - Use dev_err_probe() to simplify error paths and make deferred probe
     messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
     Tsai)

   - Power off device if setup fails (Chen-Yu Tsai)

   - Integrate new pwrctrl API to enable power control for WiFi/BT
     adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)

  NVIDIA Tegra194 PCIe controller driver:

   - Poll less aggressively and non-atomically for PME_TO_Ack during
     transition to L2 (Vidya Sagar)

   - Disable LTSSM after transition to Detect on surprise link down to
     stop toggling between Polling and Detect (Manikanta Maddireddy)

   - Don't force the device into the D0 state before L2 when suspending
     or shutting down the controller (Vidya Sagar)

   - Disable PERST# IRQ only in Endpoint mode because it's not
     registered in Root Port mode (Manikanta Maddireddy)

   - Handle 'nvidia,refclk-select' as optional (Vidya Sagar)

   - Disable direct speed change in Endpoint mode so link speed change
     is controlled by the host (Vidya Sagar)

   - Set LTR values before link up to avoid bogus LTR messages with 0
     latency (Vidya Sagar)

   - Allow system suspend when the Endpoint link is down (Vidya Sagar)

   - Use DWC IP core version, not Tegra custom values, to avoid DWC core
     version check warnings (Manikanta Maddireddy)

   - Apply ECRC workaround to devices based on DesignWare 5.00a as well
     as 4.90a (Manikanta Maddireddy)

   - Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
     erratum (Vidya Sagar)

   - Delay post-PERST# cleanup until core is powered on to avoid CBB
     timeout (Manikanta Maddireddy)

   - Assert CLKREQ# so switches that forward it to their downstream side
     can bring up those links successfully (Vidya Sagar)

   - Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
     from any previous bad link state (Vidya Sagar)

   - Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
     DMA driver and Endpoint controller driver can share the interrupt
     line (Vidya Sagar)

   - Enable DMA interrupt to support DMA in both Root Port and Endpoint
     modes (Vidya Sagar)

   - Enable hardware link retraining after link goes down in Endpoint
     mode (Vidya Sagar)

   - Add DT binding and driver support for core clock monitoring (Vidya
     Sagar)

  Qualcomm PCIe controller driver:

   - Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
     since Qcom Root Ports support hotplug events like DL_Up/Down and
     can accept writes to Slot Control without delays between writes
     (Krishna Chaitanya Chundru)

  Renesas R-Car PCIe controller driver:

   - Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)

   - Reduce EPC BAR alignment requirement to 4K (Koichiro Den)

  Renesas RZ/G3S PCIe controller driver:

   - Add RZ/G3E to DT binding and to driver (John Madieu)

   - Assert (not deassert) resets in probe error path (John Madieu)

   - Assert resets in suspend path in reverse order they were deasserted
     during probe (John Madieu)

   - Rework inbound window algorithm to prevent mapping more than
     intended region and enforce alignment on size, to prepare for
     RZ/G3E support (John Madieu)

  Rockchip DesignWare PCIe controller driver:

   - Add tracepoints for PCIe controller LTSSM transitions and link rate
     changes (Shawn Lin)

   - Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
     Lin)

  SOPHGO PCIe controller driver:

   - Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
     advertise support for them (Yao Zi)

  Synopsys DesignWare PCIe controller driver:

   - Continue with system suspend even if an Endpoint doesn't respond
     with PME_TO_Ack message (Manivannan Sadhasivam)

   - Set Endpoint MSI-X Table Size in the correct function of a
     multi-function device when configuring MSI-X, not in Function 0
     (Aksh Garg)

   - Set Max Link Width and Max Link Speed for all functions of a
     multi-function device, not just Function 0 (Aksh Garg)

   - Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)

  Miscellaneous:

   - Warn only once about invalid ACS kernel parameter format (Richard
     Cheng)

   - Suppress FW_BUG warning when writing sysfs 'numa_node' with the
     current value (Li RongQing)

   - Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"

* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
  PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
  PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
  PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
  PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
  PCI: tegra194: Add core monitor clock support
  dt-bindings: PCI: tegra194: Add monitor clock support
  PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
  PCI: tegra194: Enable DMA interrupt
  PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
  PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
  PCI: tegra194: Assert CLKREQ# explicitly by default
  PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
  PCI: tegra194: Disable L1.2 capability of Tegra234 EP
  PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
  PCI: tegra194: Use DWC IP core version
  PCI: tegra194: Free up Endpoint resources during remove()
  PCI: tegra194: Allow system suspend when the Endpoint link is not up
  PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
  PCI: tegra194: Disable direct speed change for Endpoint mode
  PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
  ...
2026-04-15 14:41:21 -07:00