[ Upstream commit bb6f4dbe26 ]
CAP_NET_ADMIN allows to configure network interfaces, not CAP_SYS_ADMIN
which only allows to call unshare(2). Without this change, running
network tests as a non-root user but with all capabilities would fail at
the setup_loopback() step with "RTNETLINK answers: Operation not
permitted".
The issue is only visible when running tests with non-root users (i.e.
only relying on ambient capabilities). Indeed, when configuring the
network interface, the "ip" command is called, which may lead to the
special handling of capabilities for the root user by execve(2). If
root is the caller, then the inherited, permitted and effective
capabilities are all reset, which then includes CAP_NET_ADMIN. However,
if a non-root user is the caller, then ambient capabilities are masked
by the inherited ones, which were explicitly dropped.
To make execution deterministic whatever users are running the tests,
set the noroot secure bit for each test, and set the inheritable and
ambient capabilities to CAP_NET_ADMIN, the only capability that may be
required after an execve(2).
Factor out _effective_cap() into _change_cap(), and use it to manage
ambient capabilities with the new set_ambient_cap() and
clear_ambient_cap() helpers.
This makes it possible to run all Landlock tests with check-linux.sh
from https://github.com/landlock-lsm/landlock-test-tools
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Link: https://lore.kernel.org/r/20240125153230.3817165-2-mic@digikod.net
[mic: Make sure SECBIT_NOROOT_LOCKED is set]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40b7835e74 ]
One issue comes up while building selftest/landlock/fs_test on my side
(gcc 7.3/glibc-2.28/kernel-4.19).
gcc -Wall -O2 -isystem fs_test.c -lcap -o selftests/landlock/fs_test
fs_test.c:4575:9: error: initializer element is not constant
.mnt = mnt_tmp,
^~~~~~~
Signed-off-by: Hu Yadi <hu.yadi@h3c.com>
Suggested-by: Jiao <jiaoxupo@h3c.com>
Reviewed-by: Berlin <berlin@h3c.com>
Link: https://lore.kernel.org/r/20240124022908.42100-1-hu.yadi@h3c.com
Fixes: 04f9070e99 ("selftests/landlock: Add tests for pseudo filesystems")
[mic: Factor out mount's data string and make mnt_tmp static]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 116099ed34 ]
One issue comes up while building selftest/landlock/net_test on my side
(gcc 7.3/glibc-2.28/kernel-4.19).
net_test.c: In function ‘set_service’:
net_test.c:91:45: warning: implicit declaration of function ‘gettid’; [-Wimplicit-function-declaration]
"_selftests-landlock-net-tid%d-index%d", gettid(),
^~~~~~
getgid
net_test.c:(.text+0x4e0): undefined reference to `gettid'
Signed-off-by: Hu Yadi <hu.yadi@h3c.com>
Suggested-by: Jiao <jiaoxupo@h3c.com>
Reviewed-by: Berlin <berlin@h3c.com>
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Link: https://lore.kernel.org/r/20240123062621.25082-1-hu.yadi@h3c.com
[mic: Cosmetic fixes]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6154fb9c21 ]
When walking directory trees, instead of looking for specific files and
running dirname to get the parent folder, traverse all folders and
ignore the ones not containing the desired files. This avoids the need
to call dirname inside the loop, which drastically decreases run time:
Running locally on a mt8192-asurada-spherion, which reports 160 test
cases, has gone from 5.5s to 2.9s, while running remotely with an
nfsroot has gone from 13.5s to 5.5s.
This change has a side-effect, which is that the root DT node now
also shows in the output, even though it isn't expected to bind to a
driver. However there shouldn't be a matching driver for the board
compatible, so the end result will be just an extra skipped test:
ok 1 / # SKIP
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/310391e8-fdf2-4c2f-a680-7744eb685177@sirena.org.uk
Fixes: 14571ab1ad ("kselftest: Add new test for detecting unprobed Devicetree devices")
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240122-dt-kselftest-dirname-perf-fix-v2-1-f1630532fd38@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4356e9f841 upstream.
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c323 ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 01c1484ac0 ]
Correct header file is needed for getting CLOSE_RANGE_* macros.
Previously it was tested with newer glibc which didn't show the need to
include the header which was a mistake.
Link: https://lkml.kernel.org/r/20231024155137.219700-1-usama.anjum@collabora.com
Fixes: ec54424923 ("selftests: core: remove duplicate defines")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Link: https://lore.kernel.org/all/7161219e-0223-d699-d6f3-81abd9abf13b@arm.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b00d0c513 ]
cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.
This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.
Repeat the "real" / expected packet.
Fixes: 9657ad09e1 ("selftests: net: test IPV6_TCLASS")
Fixes: 05ae83d5a4 ("selftests: net: test IPV6_HOPLIMIT")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a19747c3b9 ]
In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.
Address the issue using much larger write operations.
Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.
Fixes: 6bb382bcf7 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 691bb4e49c ]
Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.
Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked
Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.
Fixes: b3cc4f8a8a ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e71e016ad0 ]
The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.
Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.
Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05d92cb0e9 ]
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1]
Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2]
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 378f082eaf ("selftests/net: convert pmtu.sh to run it in unique namespace")
Fixes: 0f4765d0b4 ("selftests/net: convert unicast_extensions.sh to run it in unique namespace")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e71e016ad0 ("selftests: net: fix tcp listener handling in pmtu.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 378f082eaf ]
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e71e016ad0 ("selftests: net: fix tcp listener handling in pmtu.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f4765d0b4 ]
Here is the test result after conversion.
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e71e016ad0 ("selftests: net: fix tcp listener handling in pmtu.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb9f4a30fb ]
The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.
Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.
Tested with:
for I in $(seq 1 100); do
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:udpgro_fwd.sh || exit -1
done
in a slow environment.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7814fe24a6 ]
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa04024 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
[ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ]
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/
Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dac1f089a ]
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125100351.936262-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb177a85e8 ]
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 2dac1f089a ("perf test: Fix 'perf script' tests on s390")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 56925f389e upstream.
With previous patch, one of subtests in test_btf_id becomes
flaky and may fail. The following is a failing example:
Error: #26 btf
Error: #26/174 btf/BTF ID
Error: #26/174 btf/BTF ID
btf_raw_create:PASS:check 0 nsec
btf_raw_create:PASS:check 0 nsec
test_btf_id:PASS:check 0 nsec
...
test_btf_id:PASS:check 0 nsec
test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1
The test tries to prove a btf_id not available after the map is closed.
But btf_id is freed only after workqueue and a rcu grace period, compared
to previous case just after a rcu grade period.
Depending on system workload, workqueue could take quite some time
to execute function bpf_map_free_deferred() which may cause the test failure.
Instead of adding arbitrary delays, let us remove the logic to
check btf_id availability after map is closed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8cc063ae1b ]
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6fb3050d ]
Similar to commit dd2d40acdb ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc0970d5ac ]
When running the pmtu.sh via the kselftest infra, accessing
/dev/stdout gives unexpected results:
# dd: failed to open '/dev/stdout': Device or resource busy
# TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL]
Let dd use directly the standard output to fix the above:
# TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ]
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4e4b6d568 ]
The pmtu.sh test tries to detect the tunnel protocols available
in the running kernel and properly skip the unsupported cases.
In a few more complex setup, such detection is unsuccessful, as
the script currently ignores some intermediate error code at
setup time.
Before:
# which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL]
# PMTU exception wasn't created after creating tunnel exceeding link layer MTU
# ./pmtu.sh: line 931: kill: (7543) - No such process
# ./pmtu.sh: line 931: kill: (7544) - No such process
After:
# xfrm4 not supported
# TEST: vti4: PMTU exceptions [SKIP]
Fixes: ece1278a9b ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7c25d8e17 ]
The mentioned test uses a few Kconfig still missing the
net config, add them.
Before:
# Error: Specified qdisc kind is unknown.
# Error: Specified qdisc kind is unknown.
# Error: Qdisc not classful.
# We have an error talking to the kernel
# Error: Qdisc not classful.
# We have an error talking to the kernel
# policy_routing not supported
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP]
After:
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ]
Fixes: ec730c3e1f ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/8d27bf6762a5c7b3acc457d6e6872c533040f9c1.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59c9358349 ]
Modern OSes use iptables implementation with nf_tables as a backend,
e.g.:
$ iptables -V
iptables v1.8.8 (nf_tables)
Pablo points out that we need CONFIG_NFT_COMPAT to make that work,
otherwise we see a lot of:
Warning: Extension DNAT revision 0 not supported, missing kernel module?
with DNAT being just an example here, other modules we need
include udp, TTL, length etc.
Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f7c25d8e17 ("selftests: net: add missing config for pmtu.sh tests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9ec85153f ]
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40f873a7c ]
One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.
However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].
Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.
[1]
# Backup nexthop ID - invalid IDs
# -------------------------------
[...]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
# TEST: IPv6 address family nexthop as backup nexthop [ OK ]
# TEST: No forwarding out of swp1 [ OK ]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
[...]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89abe62837 ]
The gro.sh test-case relay on the gro_flush_timeout to ensure
that all the segments belonging to any given batch are properly
aggregated.
The other end, the sender is a user-space program transmitting
each packet with a separate write syscall. A busy host and/or
stracing the sender program can make the relevant segments reach
the GRO engine after the flush timeout triggers.
Give the GRO flush timeout more slack, to avoid sporadic self-tests
failures.
Fixes: 9af771d2ec ("selftests/net: allow GRO coalesce test on veth")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3cb3b0088 ]
the udpgro_fraglist self-test uses the BPF classifiers, but the
current net self-test configuration does not include it, causing
CI failures:
# selftests: net: udpgro_frglist.sh
# ipv6
# tcp - over veth touching data
# -l 4 -6 -D 2001:db8::1 -t rx -4 -t
# Error: TC classifier not found.
# We have an error talking to the kernel
# Error: TC classifier not found.
# We have an error talking to the kernel
Add the missing knob.
Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/7c3643763b331e9a400e1874fe089193c99a1c3f.1706170897.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcf67d82b8 ]
The big_tcp test-case requires a few kernel knobs currently
not specified in the net selftests config, causing the
following failure:
# selftests: net: big_tcp.sh
# Error: Failed to load TC action module.
# We have an error talking to the kernel
...
# Testing for BIG TCP:
# CLI GSO | GW GRO | GW GSO | SER GRO
# ./big_tcp.sh: line 107: test: !=: unary operator expected
...
# on on on on : [FAIL_on_link1]
Add the missing configs
Fixes: 6bb382bcf7 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4acffb6663 ]
The UDP GRO forwarding test still hard-code an arbitrary pause
to wait for the UDP listener becoming ready in background.
That causes sporadic failures depending on the host load.
Replace the sleep with the existing helper waiting for the desired
port being exposed.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98cb12eb52 ]
Several net tests requires an XDP program build under the ebpf
directory, and error out if such program is not available.
That makes running successful net test hard, let's duplicate into the
net dir the [very small] program, re-using the existing rules to build
it, and finally dropping the bogus dependency.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4acffb6663 ("selftests: net: explicitly wait for listener ready")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad30469a84 ]
uniq() will write one command name over another causing the overwritten
string to be leaked. Fix by doing a pass that removes duplicates and a
second that removes the holes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd552ee32 ]
DEFINED only considers symbols, not section names. Hence, replace the
check for .got.plt with the _GLOBAL_OFFSET_TABLE_ symbol and remove other
(non-essential) asserts.
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231005153854.25566-10-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dbba30fd6 ]
Since commit d927ef5004 ("perf cs-etm: Add exception level consistency
check"), the exception that was added to Perf will be triggered unless
the following bugfix from OpenCSD is present:
- _Version 1.2.1_:
- __Bugfix__:
ETM4x / ETE - output of context elements to client can in some
circumstances be delayed until after subsequent atoms have been
processed leading to incorrect memory decode access via the client
callbacks. Fixed to flush context elements immediately they are
committed.
Rather than remove the assert and silently fail, just increase the
minimum version requirement to avoid hard to debug issues and
regressions.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230901133716.677499-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc3a5534e2 ]
An issue occurred while reading an ELF file in libbpf.c during fuzzing:
Program received signal SIGSEGV, Segmentation fault.
0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
4206 in libbpf.c
(gdb) bt
#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
#9 0x00000000005f2601 in main ()
(gdb)
scn_data was null at this code(tools/lib/bpf/src/libbpf.c):
if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {
The scn_data is derived from the code above:
scn = elf_sec_by_idx(obj, sec_idx);
scn_data = elf_sec_data(obj, scn);
relo_sec_name = elf_sec_str(obj, shdr->sh_name);
sec_name = elf_sec_name(obj, scn);
if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
return -EINVAL;
In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer
Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com>
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Changye Wu <wuchangye@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62d9a969f4 ]
When compiling BPF selftests with RELEASE=1, we get two new
warnings, which are treated as errors. Fix them.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231212225343.1723081-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b16904fd9f ]
With latest upstream llvm18, the following test cases failed:
$ ./test_progs -j
#13/2 bpf_cookie/multi_kprobe_link_api:FAIL
#13/3 bpf_cookie/multi_kprobe_attach_api:FAIL
#13 bpf_cookie:FAIL
#77 fentry_fexit:FAIL
#78/1 fentry_test/fentry:FAIL
#78 fentry_test:FAIL
#82/1 fexit_test/fexit:FAIL
#82 fexit_test:FAIL
#112/1 kprobe_multi_test/skel_api:FAIL
#112/2 kprobe_multi_test/link_api_addrs:FAIL
[...]
#112 kprobe_multi_test:FAIL
#356/17 test_global_funcs/global_func17:FAIL
#356 test_global_funcs:FAIL
Further analysis shows llvm upstream patch [1] is responsible for the above
failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c,
without [1], the asm code is:
0000000000000400 <bpf_fentry_test7>:
400: f3 0f 1e fa endbr64
404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9>
409: 48 89 f8 movq %rdi, %rax
40c: c3 retq
40d: 0f 1f 00 nopl (%rax)
... and with [1], the asm code is:
0000000000005d20 <bpf_fentry_test7.specialized.1>:
5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5>
5d25: c3 retq
... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7>
and this caused test failures for #13/#77 etc. except #356.
For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog
looks like:
0000000000000000 <global_func17>:
0: b4 00 00 00 2a 00 00 00 w0 = 0x2a
1: 95 00 00 00 00 00 00 00 exit
... which passed verification while the test itself expects a verification
failure.
Let us add 'barrier_var' style asm code in both places to prevent function
specialization which caused selftests failure.
[1] https://github.com/llvm/llvm-project/pull/72903
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4849775587 ]
If the net_cls subsystem is already mounted, attempting to mount it again
in setup_classid_environment() will result in a failure with the error code
EBUSY. Despite this, tmpfs will have been successfully mounted at
/sys/fs/cgroup/net_cls. Consequently, the /sys/fs/cgroup/net_cls directory
will be empty, causing subsequent setup operations to fail.
Here's an error log excerpt illustrating the issue when net_cls has already
been mounted at /sys/fs/cgroup/net_cls prior to running
setup_classid_environment():
- Before that change
$ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2
test_cgroup_v1v2:PASS:server_fd 0 nsec
test_cgroup_v1v2:PASS:client_fd 0 nsec
test_cgroup_v1v2:PASS:cgroup_fd 0 nsec
test_cgroup_v1v2:PASS:server_fd 0 nsec
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs
(cgroup_helpers.c:540: errno: No such file or directory) Opening cgroup classid: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/net_cls.classid
run_test:PASS:skel_open 0 nsec
run_test:PASS:prog_attach 0 nsec
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/cgroup.procs
run_test:FAIL:join_classid unexpected error: 1 (errno 2)
test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 2)
(cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs
#44 cgroup_v1v2:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
- After that change
$ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2
#44 cgroup_v1v2:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231111090034.4248-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 100888fb6d ]
With latest clang18 (main branch of llvm-project repo), when building bpf selftests,
[~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j
The following compilation error happens:
fatal error: error in backend: Branch target out of insn range
...
Stack dump:
0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include
-I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi
-I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter
/home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include
-idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf
-c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o
1. <eof> parser at end of file
2. Code generation
...
The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay
since cpu=v4 supports 32-bit branch target offset.
The above failure is due to upstream llvm patch [1] where some inlining behavior
are changed in clang18.
To workaround the issue, previously all 180 loop iterations are fully unrolled.
The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid
unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the
compiler is clang18, the unrollng amount is unconditionally reduced.
[1] 1a2e77cf9e
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4c7e88732 ]
Some compilers complain about get_pprint_mapv_size() not returning value
in some code paths. Fix with explicit return.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b62aa59d0 ]
Compiler complains about malloc(). We also don't need to dynamically
allocate anything, so make the life easier by using statically sized
buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae27bc7ff ]
Add parsing of attributes as diagnostic data. Fixes issue with test plan
being parsed incorrectly as diagnostic data when located after
suite-level attributes.
Note that if there does not exist a test plan line, the diagnostic lines
between the suite header and the first result will be saved in the suite
log rather than the first test case log.
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2933a8759 ]
The prio_arp/ns tests hard code the mode to active-backup. At the same
time, The balance-alb/tlb modes do not support arp/ns target. So remove
the prio_arp/ns tests from the loop and only test active-backup mode.
Fixes: 481b56e039 ("selftests: bonding: re-format bond option tests")
Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20240123075917.1576360-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0879020a78 ]
This test is missing a whole bunch of checks for interface
renaming and one ifup. Presumably it was only used on a system
with renaming disabled and NetworkManager running.
Fixes: 91f430b2c4 ("selftests: net: add a test for UDP tunnel info infra")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240123060529.1033912-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0719b5338a ]
If there is more than 32 cpus the bitmask will start to contain
commas, leading to:
./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected
Remove the commas, bash doesn't interpret leading zeroes as oct
so that should be good enough. Switch to bash, Simon reports that
not all shells support this type of substitution.
Fixes: c12e0d5f26 ("self-tests: introduce self-tests for RPS default mask")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122195815.638997-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
