Before TVQM, all TX queues were allocated straight at init.
With TVQM, queues are allocated on demand and hence we need
to check if a queue exists before dereferencing it.
Fixes: 66128fa08806 ("iwlwifi: move to TVQM mode")
Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
iwlagn_check_ratid_empty takes the tid as a parameter, but
it doesn't check that it is not IWL_TID_NON_QOS.
Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array
with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS]
is a bad idea.
This happened in iwlagn_rx_reply_tx. Since
iwlagn_check_ratid_empty is relevant only to check whether
we can open A-MPDU, this flow is irrelevant if tid is
IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside
the
if (tid != IWL_TID_NON_QOS)
a few lines earlier in the function.
Cc: <stable@vger.kernel.org>
Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each device node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Link: http://lkml.kernel.org/r/20170718214339.7774-7-robh@kernel.org
[ Clarify the error message while at it, as 'node' is ambiguous. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Most of things are in place and we can enable support for 5-level paging.
The patch makes XEN_PV and XEN_PVH dependent on !X86_5LEVEL. Both are
not ready to work with 5-level paging.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170716225954.74185-9-kirill.shutemov@linux.intel.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All bits and pieces are now in place and we can allow userspace to have VMAs
above 47 bits.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170716225954.74185-8-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86, 5-level paging enables 56-bit userspace virtual address space.
Not all user space is ready to handle wide addresses. It's known that
at least some JIT compilers use higher bits in pointers to encode their
information. It collides with valid pointers with 5-level paging and
leads to crashes.
To mitigate this, we are not going to allocate virtual address space
above 47-bit by default.
But userspace can ask for allocation from full address space by
specifying hint address (with or without MAP_FIXED) above 47-bits.
If hint address set above 47-bit, but MAP_FIXED is not specified, we try
to look for unmapped area by specified address. If it's already
occupied, we look for unmapped area in *full* address space, rather than
from 47-bit window.
A high hint address would only affect the allocation in question, but not
any future mmap()s.
Specifying high hint address on older kernel or on machine without 5-level
paging support is safe. The hint will be ignored and kernel will fall back
to allocation from 47-bit address space.
This approach helps to easily make application's memory allocator aware
about large address space without manually tracking allocated virtual
address space.
The patch puts all machinery in place, but not yet allows userspace to have
mappings above 47-bit -- TASK_SIZE_MAX has to be raised to get the effect.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170716225954.74185-7-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MPX (without MAWA extension) cannot handle addresses above 47 bits, so we
need to make sure that MPX cannot be enabled if we already have a VMA above
the boundary and forbid creating such VMAs once MPX is enabled.
The patch implements mpx_unmapped_area_check() which is called from all
variants of get_unmapped_area() to check if the requested address fits
mpx.
On enabling MPX, we check if we already have any vma above 47-bit
boundary and forbit the enabling if we do.
As long as DEFAULT_MAP_WINDOW is equal to TASK_SIZE_MAX, the change is
nop. It will change when we allow userspace to have mappings above
47-bits.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170716225954.74185-6-kirill.shutemov@linux.intel.com
[ Readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename these helpers to be consistent with spelling of TASK_SIZE and
related constants.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170716225954.74185-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
XEN_ELFNOTE_INIT_P2M has to be 512GB for both 4- and 5-level paging.
(PUD_SIZE * PTRS_PER_PUD) would do this.
Unfortunately, we cannot use P4D_SIZE, which would fit here. With
current headers structure it cannot be used in assembly, if p4d
level is folded.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170716225954.74185-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have 2 functions using the same sched_task callback:
- PEBS drain for free running counters
- LBR save/store
Both of them are called from intel_pmu_sched_task() and
either of them can be unwillingly triggered when the
other one is configured to run.
Let's say there's PEBS drain configured in sched_task
callback for the event, but in the callback itself
(intel_pmu_sched_task()) we will also run the code for
LBR save/restore, which we did not ask for, but the
code in intel_pmu_sched_task() does not check for that.
This can lead to extra cycles in some perf monitoring,
like when we monitor PEBS event without LBR data.
# perf record --no-timestamp -c 10000 -e cycles:p ./perf bench sched pipe -l 1000000
(We need PEBS, non freq/non timestamp event to enable
the sched_task callback)
The perf stat of cycles and msr:write_msr for above
command before the change:
...
Performance counter stats for './perf record --no-timestamp -c 10000 -e cycles:p \
./perf bench sched pipe -l 1000000' (5 runs):
18,519,557,441 cycles:k
91,195,527 msr:write_msr
29.334476406 seconds time elapsed
And after the change:
...
Performance counter stats for './perf record --no-timestamp -c 10000 -e cycles:p \
./perf bench sched pipe -l 1000000' (5 runs):
18,704,973,540 cycles:k
27,184,720 msr:write_msr
16.977875900 seconds time elapsed
There's no affect on cycles:k because the sched_task happens
with events switched off, however the msr:write_msr tracepoint
counter together with almost 50% of time speedup show the
improvement.
Monitoring LBR event and having extra PEBS drain processing
in sched_task callback showed just a little speedup, because
the drain function does not do much extra work in case there
is no PEBS data.
Adding conditions to recognize the configured work that needs
to be done in the x86_pmu's sched_task callback.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170719075247.GA27506@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The BAU confers no benefit to a UV system running with only one hub/socket.
Permanently disable the BAU driver if there are less than two hubs online
to avoid BAU overhead. We have observed failed boots on single-socket UV4
systems caused by BAU that are avoided with this patch.
Also, while at it, consolidate initialization error blocks and fix a
memory leak.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Russ Anderson <rja@hpe.com>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: tony.ernst@hpe.com
Link: http://lkml.kernel.org/r/1500588351-78016-1-git-send-email-abanman@hpe.com
[ Minor cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We're missing ctx lock when iterating children siblings
within the perf_read path for group reading. Following
race and crash can happen:
User space doing read syscall on event group leader:
T1:
perf_read
lock event->ctx->mutex
perf_read_group
lock leader->child_mutex
__perf_read_group_add(child)
list_for_each_entry(sub, &leader->sibling_list, group_entry)
----> sub might be invalid at this point, because it could
get removed via perf_event_exit_task_context in T2
Child exiting and cleaning up its events:
T2:
perf_event_exit_task_context
lock ctx->mutex
list_for_each_entry_safe(child_event, next, &child_ctx->event_list,...
perf_event_exit_event(child)
lock ctx->lock
perf_group_detach(child)
unlock ctx->lock
----> child is removed from sibling_list without any sync
with T1 path above
...
free_event(child)
Before the child is removed from the leader's child_list,
(and thus is omitted from perf_read_group processing), we
need to ensure that perf_read_group touches child's
siblings under its ctx->lock.
Peter further notes:
| One additional note; this bug got exposed by commit:
|
| ba5213ae6b ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
|
| which made it possible to actually trigger this code-path.
Tested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ba5213ae6b ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
Link: http://lkml.kernel.org/r/20170720141455.2106-1-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit f95d95a7cd.
With commit f95d95a7cd ("rtlwifi: btcoex: rtl8723be: fix ant_sel not
work"), the kernel has a NULL pointer dereference oops. This content and
the proper fix will be included in a later patch.
Fixes: f95d95a7cd ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Recent change in brcmf_sdio_txpkt_hdalign() changed the
behavior and now always returns 0. This resulted in a
regression which basically renders the device useless.
Fixes: 270a6c1f65 ("brcmfmac: rework headroom check in .start_xmit()")
Reported-by: S. Gilles <sgilles@math.umd.edu>
Tested-by: S. Gilles <sgilles@math.umd.edu>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fixes: df33767d ("uuid: hoist helpers uuid_equal() and uuid_copy() from xfs")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When phy-sun4i-usb's probing fails, it does not print the reason in
kernel log, forcing the developer to edit this driver to add info logs.
This commit makes the kernel print the reason of phy-sun4i-usb's probing
failure or a success message.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Tested-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
It's better to be explicit and use the DRIVER_ATTR_RW() and
DRIVER_ATTR_RO() macros when defining a driver's sysfs file.
Bonus is this fixes up a checkpatch.pl warning.
This is part of a series to drop DRIVER_ATTR() from the tree entirely.
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
- Fix a regression where the parallel-display driver would not probe
anymore if no panel is specified in the device tree, since the
introduction of drm_of_find_panel_or_bridge.
- Fix a typo in the plane format list: replace a duplicate BGRA8888 format
with BGRX8888, as originally intended.
-----BEGIN PGP SIGNATURE-----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=0w4j
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2017-07-18' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm: fix parallel display regression and typo in plane format list
- Fix a regression where the parallel-display driver would not probe
anymore if no panel is specified in the device tree, since the
introduction of drm_of_find_panel_or_bridge.
- Fix a typo in the plane format list: replace a duplicate BGRA8888 format
with BGRX8888, as originally intended.
* tag 'imx-drm-fixes-2017-07-18' of git://git.pengutronix.de/git/pza/linux:
drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure
drm/imx: fix typo in ipu_plane_formats[]
Core Changes:
- fence: Introduce new fence flag to signify timestamp is populated (Chris)
- mst: Avoid processing incomplete data + fix NULL dereference (Imre)
Driver Changes:
- vc4: Avoid WARN from grabbing a ref from vblank that's not on (Boris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Imre Deak <imre.deak@intel.com>
* tag 'drm-misc-fixes-2017-07-20' of git://anongit.freedesktop.org/git/drm-misc:
drm/mst: Avoid processing partially received up/down message transactions
drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
drm/mst: Fix error handling during MST sideband message reception
drm/vc4: Fix VBLANK handling in crtc->enable() path
dma-buf/fence: Avoid use of uninitialised timestamp
This is a pull request for 4.13-rc2/3. The first patch addresses a bug that
appears when doing over-subscription of queues, due to a miscalculation of
the number of available compute queues. The other three patches remove
dead code that was created from the bugfix.
* tag 'drm-amdkfd-fixes-2017-07-18' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdgpu: Remove unused field kgd2kfd_shared_resources.num_mec
drm/radeon: Remove initialization of shared_resources.num_mec
drm/amdkfd: Remove unused references to shared_resources.num_mec
drm/amdgpu: Fix KFD oversubscription by tracking queues correctly
gcc-7 warns about the result of a constant multiplication used as
a boolean:
drivers/ide/ide-timings.c: In function 'ide_timing_quantize':
drivers/ide/ide-timings.c:112:24: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
q->setup = EZ(t->setup * 1000, T);
This slightly rearranges the macro to simplify the code and avoid
the warning at the same time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The libretech CC derives less from the p212 than initially thought.
Several voltage regulators are different and the capabilities of the
sdcard and emmc also differ.
Deriving from the p212 is not convient anymore so the libretech is now
derived from s905x definition directly.
Fixes: cd84aff1d9 ("ARM64: dts: meson-gxl: Add Libre Technology CC support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Use the specific compatible for AO pwms so the pwms input can
be correctly set
FDIV4 is not present on the pwm A0, so change kadhas vim input
clocks to xtal.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The new driver fails to build without INPUT_POLLDEV
drivers/platform/x86/peaq-wmi.o: In function `peaq_wmi_exit':
peaq-wmi.c:(.exit.text+0x1c): undefined reference to `input_unregister_polled_device'
drivers/platform/x86/peaq-wmi.o: In function `peaq_wmi_init':
peaq-wmi.c:(.init.text+0x23): undefined reference to `input_allocate_polled_device'
peaq-wmi.c:(.init.text+0x18e): undefined reference to `input_register_polled_device'
For some reason, all other drivers that need this use 'select'
here rather than 'depends on', so I'm doing the same.
Fixes: 13bb0fd551 ("platform/x86: peaq-wmi: Add new peaq-wmi driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Pull networking fixes from David Miller:
1) BPF verifier signed/unsigned value tracking fix, from Daniel
Borkmann, Edward Cree, and Josef Bacik.
2) Fix memory allocation length when setting up calls to
->ndo_set_mac_address, from Cong Wang.
3) Add a new cxgb4 device ID, from Ganesh Goudar.
4) Fix FIB refcount handling, we have to set it's initial value before
the configure callback (which can bump it). From David Ahern.
5) Fix double-free in qcom/emac driver, from Timur Tabi.
6) A bunch of gcc-7 string format overflow warning fixes from Arnd
Bergmann.
7) Fix link level headroom tests in ip_do_fragment(), from Vasily
Averin.
8) Fix chunk walking in SCTP when iterating over error and parameter
headers. From Alexander Potapenko.
9) TCP BBR congestion control fixes from Neal Cardwell.
10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.
11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
Wang.
12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
from Gao Feng.
13) Cannot release skb->dst in UDP if IP options processing needs it.
From Paolo Abeni.
14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
Levin and myself.
15) Revert some rtnetlink notification changes that are causing
regressions, from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
net: bonding: Fix transmit load balancing in balance-alb mode
rds: Make sure updates to cp_send_gen can be observed
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
net: dsa: b53: Add missing ARL entries for BCM53125
bpf: more tests for mixed signed and unsigned bounds checks
bpf: add test for mixed signed and unsigned bounds checks
bpf: fix up test cases with mixed signed/unsigned bounds
bpf: allow to specify log level and reduce it for test_verifier
bpf: fix mixed signed/unsigned derived min/max value bounds
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: tehuti: don't process data if it has not been copied from userspace
Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
NET: dwmac: Make dwmac reset unconditional
net: Zero terminate ifr_name in dev_ifname().
wireless: wext: terminate ifr name coming from userspace
netfilter: fix netfilter_net_init() return
...
balance-alb mode used to have transmit dynamic load balancing feature
enabled by default. However, transmit dynamic load balancing no longer
works in balance-alb after commit 8b426dc54c ("bonding: remove
hardcoded value").
Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to
send packets. This function uses the parameter tlb_dynamic_lb.
tlb_dynamic_lb used to have the default value of 1 for balance-alb, but
now the value is set to 0 except in balance-tlb.
Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb
for balance-alb similar to balance-tlb.
Fixes: 8b426dc54c ("bonding: remove hardcoded value")
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
cp->cp_send_gen is treated as a normal variable, although it may be
used by different threads.
This is fixed by using {READ,WRITE}_ONCE when it is incremented and
READ_ONCE when it is read outside the {acquire,release}_in_xmit
protection.
Normative reference from the Linux-Kernel Memory Model:
Loads from and stores to shared (but non-atomic) variables should
be protected with the READ_ONCE(), WRITE_ONCE(), and
ACCESS_ONCE().
Clause 5.1.2.4/25 in the C standard is also relevant.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
print the versions of vpd and serial configuration file,
flashed to adapter, and cleanup the relevant code.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Push the request_irq function to the end of probe so as
to ensure all the required fields are populated in the event
of an ISR getting executed right after requesting the irq.
Currently while loading the crash kernel a crash was seen as
soon as devm_request_threaded_irq was called. This was due to
n->poll being NULL which is called as part of net_rx_action
function.
Suggested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Net stack initialization currently initializes fib-trie after the
first call to netdevice_notifier() call. In fact fib_trie initialization
needs to happen before first rtnl_register(). It does not cause any problem
since there are no devices UP at this moment, but trying to bring 'lo'
UP at initialization would make this assumption wrong and exposes the issue.
Fixes following crash
Call Trace:
? alternate_node_alloc+0x76/0xa0
fib_table_insert+0x1b7/0x4b0
fib_magic.isra.17+0xea/0x120
fib_add_ifaddr+0x7b/0x190
fib_netdev_event+0xc0/0x130
register_netdevice_notifier+0x1c1/0x1d0
ip_fib_init+0x72/0x85
ip_rt_init+0x187/0x1e9
ip_init+0xe/0x1a
inet_init+0x171/0x26c
? ipv4_offload_init+0x66/0x66
do_one_initcall+0x43/0x160
kernel_init_freeable+0x191/0x219
? rest_init+0x80/0x80
kernel_init+0xe/0x150
ret_from_fork+0x22/0x30
Code: f6 46 23 04 74 86 4c 89 f7 e8 ae 45 01 00 49 89 c7 4d 85 ff 0f 85 7b ff ff ff 31 db eb 08 4c 89 ff e8 16 47 01 00 48 8b 44 24 38 <45> 8b 6e 14 4d 63 76 74 48 89 04 24 0f 1f 44 00 00 48 83 c4 08
RIP: kmem_cache_alloc+0xcf/0x1c0 RSP: ffff9b1500017c28
CR2: 0000000000000014
Fixes: 7b1a74fdbb ("[NETNS]: Refactor fib initialization so it can handle multiple namespaces.")
Fixes: 7f9b80529b ("[IPV4]: fib hash|trie initialization")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtnet_set_mac_address() interprets mac address as struct
sockaddr, but upper layer only allocates dev->addr_len
which is ETH_ALEN + sizeof(sa_family_t) in this case.
We lack a unified definition for mac address, so just fix
the upper layer, this also allows drivers to interpret it
to struct sockaddr freely.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BCM53125 entry was missing an arl_entries member which would
basically prevent the ARL search from terminating properly. This switch
has 4 ARL entries, so add that.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
BPF map value adjust fix
First patch in the series is the actual fix and the remaining
patches are just updates to selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple of more test cases to BPF selftests that are related
to mixed signed and unsigned checks.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These failed due to a bug in verifier bounds handling.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the few existing test cases that used mixed signed/unsigned
bounds and switch them only to one flavor. Reason why we need this
is that proper boundaries cannot be derived from mixed tests.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the test_verifier case, it's quite hard to parse log level 2 to
figure out what's causing an issue when used to log level 1. We do
want to use bpf_verify_program() in order to simulate some of the
tests with strict alignment. So just add an argument to pass the level
and put it to 1 for test_verifier.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward reported that there's an issue in min/max value bounds
tracking when signed and unsigned compares both provide hints
on limits when having unknown variables. E.g. a program such
as the following should have been rejected:
0: (7a) *(u64 *)(r10 -8) = 0
1: (bf) r2 = r10
2: (07) r2 += -8
3: (18) r1 = 0xffff8a94cda93400
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+7
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
7: (7a) *(u64 *)(r10 -16) = -8
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = -1
10: (2d) if r1 > r2 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0
R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
11: (65) if r1 s> 0x1 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1
R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
12: (0f) r0 += r1
13: (72) *(u8 *)(r0 +0) = 0
R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1
R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
14: (b7) r0 = 0
15: (95) exit
What happens is that in the first part ...
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = -1
10: (2d) if r1 > r2 goto pc+3
... r1 carries an unsigned value, and is compared as unsigned
against a register carrying an immediate. Verifier deduces in
reg_set_min_max() that since the compare is unsigned and operation
is greater than (>), that in the fall-through/false case, r1's
minimum bound must be 0 and maximum bound must be r2. Latter is
larger than the bound and thus max value is reset back to being
'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now
'R1=inv,min_value=0'. The subsequent test ...
11: (65) if r1 s> 0x1 goto pc+2
... is a signed compare of r1 with immediate value 1. Here,
verifier deduces in reg_set_min_max() that since the compare
is signed this time and operation is greater than (>), that
in the fall-through/false case, we can deduce that r1's maximum
bound must be 1, meaning with prior test, we result in r1 having
the following state: R1=inv,min_value=0,max_value=1. Given that
the actual value this holds is -8, the bounds are wrongly deduced.
When this is being added to r0 which holds the map_value(_adj)
type, then subsequent store access in above case will go through
check_mem_access() which invokes check_map_access_adj(), that
will then probe whether the map memory is in bounds based
on the min_value and max_value as well as access size since
the actual unknown value is min_value <= x <= max_value; commit
fce366a9dd ("bpf, verifier: fix alu ops against map_value{,
_adj} register types") provides some more explanation on the
semantics.
It's worth to note in this context that in the current code,
min_value and max_value tracking are used for two things, i)
dynamic map value access via check_map_access_adj() and since
commit 06c1c04972 ("bpf: allow helpers access to variable memory")
ii) also enforced at check_helper_mem_access() when passing a
memory address (pointer to packet, map value, stack) and length
pair to a helper and the length in this case is an unknown value
defining an access range through min_value/max_value in that
case. The min_value/max_value tracking is /not/ used in the
direct packet access case to track ranges. However, the issue
also affects case ii), for example, the following crafted program
based on the same principle must be rejected as well:
0: (b7) r2 = 0
1: (bf) r3 = r10
2: (07) r3 += -512
3: (7a) *(u64 *)(r10 -16) = -8
4: (79) r4 = *(u64 *)(r10 -16)
5: (b7) r6 = -1
6: (2d) if r4 > r6 goto pc+5
R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
7: (65) if r4 s> 0x1 goto pc+4
R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1
R10=fp
8: (07) r4 += 1
9: (b7) r5 = 0
10: (6a) *(u16 *)(r10 -512) = 0
11: (85) call bpf_skb_load_bytes#26
12: (b7) r0 = 0
13: (95) exit
Meaning, while we initialize the max_value stack slot that the
verifier thinks we access in the [1,2] range, in reality we
pass -7 as length which is interpreted as u32 in the helper.
Thus, this issue is relevant also for the case of helper ranges.
Resetting both bounds in check_reg_overflow() in case only one
of them exceeds limits is also not enough as similar test can be
created that uses values which are within range, thus also here
learned min value in r1 is incorrect when mixed with later signed
test to create a range:
0: (7a) *(u64 *)(r10 -8) = 0
1: (bf) r2 = r10
2: (07) r2 += -8
3: (18) r1 = 0xffff880ad081fa00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+7
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
7: (7a) *(u64 *)(r10 -16) = -8
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = 2
10: (3d) if r2 >= r1 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
11: (65) if r1 s> 0x4 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
12: (0f) r0 += r1
13: (72) *(u8 *)(r0 +0) = 0
R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4
R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
14: (b7) r0 = 0
15: (95) exit
This leaves us with two options for fixing this: i) to invalidate
all prior learned information once we switch signed context, ii)
to track min/max signed and unsigned boundaries separately as
done in [0]. (Given latter introduces major changes throughout
the whole verifier, it's rather net-next material, thus this
patch follows option i), meaning we can derive bounds either
from only signed tests or only unsigned tests.) There is still the
case of adjust_reg_min_max_vals(), where we adjust bounds on ALU
operations, meaning programs like the following where boundaries
on the reg get mixed in context later on when bounds are merged
on the dst reg must get rejected, too:
0: (7a) *(u64 *)(r10 -8) = 0
1: (bf) r2 = r10
2: (07) r2 += -8
3: (18) r1 = 0xffff89b2bf87ce00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+6
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
7: (7a) *(u64 *)(r10 -16) = -8
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = 2
10: (3d) if r2 >= r1 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
11: (b7) r7 = 1
12: (65) if r7 s> 0x0 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp
13: (b7) r0 = 0
14: (95) exit
from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp
15: (0f) r7 += r1
16: (65) if r7 s> 0x4 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
17: (0f) r0 += r7
18: (72) *(u8 *)(r0 +0) = 0
R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
19: (b7) r0 = 0
20: (95) exit
Meaning, in adjust_reg_min_max_vals() we must also reset range
values on the dst when src/dst registers have mixed signed/
unsigned derived min/max value bounds with one unbounded value
as otherwise they can be added together deducing false boundaries.
Once both boundaries are established from either ALU ops or
compare operations w/o mixing signed/unsigned insns, then they
can safely be added to other regs also having both boundaries
established. Adding regs with one unbounded side to a map value
where the bounded side has been learned w/o mixing ops is
possible, but the resulting map value won't recover from that,
meaning such op is considered invalid on the time of actual
access. Invalid bounds are set on the dst reg in case i) src reg,
or ii) in case dst reg already had them. The only way to recover
would be to perform i) ALU ops but only 'add' is allowed on map
value types or ii) comparisons, but these are disallowed on
pointers in case they span a range. This is fine as only BPF_JEQ
and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers
which potentially turn them into PTR_TO_MAP_VALUE type depending
on the branch, so only here min/max value cannot be invalidated
for them.
In terms of state pruning, value_from_signed is considered
as well in states_equal() when dealing with adjusted map values.
With regards to breaking existing programs, there is a small
risk, but use-cases are rather quite narrow where this could
occur and mixing compares probably unlikely.
Joint work with Josef and Edward.
[0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html
Fixes: 484611357c ("bpf: allow access into map value arrays")
Reported-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix the average CPU load computations in the intel_pstate driver
on Knights Landing (Xeon Phi) processors that require an extra
factor to compensate for a rate change differences between the
TSC and MPERF which is missing (Srinivas Pandruvada).
- Fix an initialization ordering issue in the generic power domains
(genpd) framework (Sudeep Holla).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ORNK
-----END PGP SIGNATURE-----
Merge tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These are two stable-candidate fixes for the intel_pstate driver and
the generic power domains (genpd) framework.
Specifics:
- Fix the average CPU load computations in the intel_pstate driver on
Knights Landing (Xeon Phi) processors that require an extra factor
to compensate for a rate change differences between the TSC and
MPERF which is missing (Srinivas Pandruvada).
- Fix an initialization ordering issue in the generic power domains
(genpd) framework (Sudeep Holla)"
* tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
cpufreq: intel_pstate: Correct the busy calculation for KNL
In some circumstances, _alloc_read_agf can return an error code of zero
but also a null AGF buffer pointer. Check for this and jump out.
Fixes-coverity-id: 1415250
Fixes-coverity-id: 1415320
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We must initialize the firstfsb parameter to _bmapi_write so that it
doesn't incorrectly treat stack garbage as a restriction on which AGs
it can search for free space.
Fixes-coverity-id: 1402025
Fixes-coverity-id: 1415167
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Check the _btree_check_block return value for the firstrec and lastrec
functions, since we have the ability to signal that the repositioning
did not succeed.
Fixes-coverity-id: 114067
Fixes-coverity-id: 114068
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The local pad parameter in media_entity_remote_pad() is not modified.
Make that explicit by adding a const modifier.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The core already does this in setup_commit(). With this we can also
remove the unpin_work_count since it's the last user, and also remove
the loop since that was only used for stalling against legacy flips.
v2: Amend commit message a bit (Chris).
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170720175754.30751-8-daniel.vetter@ffwll.ch
