Commit graph

708,694 commits

Author SHA1 Message Date
Al Viro
09bf4f5b6e ufs: avoid grabbing ->truncate_mutex if possible
tail unpacking is done in a wrong place; the deadlocks galore
is best dealt with by doing that in ->write_iter() (and switching
to iomap, while we are at it), but that's rather painful to
backport.  The trouble comes from grabbing pages that cover
the beginning of tail from inside of ufs_new_fragments(); ongoing
pageout of any of those is going to deadlock on ->truncate_mutex
with process that got around to extending the tail holding that
and waiting for page to get unlocked, while ->writepage() on
that page is waiting on ->truncate_mutex.

The thing is, we don't need ->truncate_mutex when the fragment
we are trying to map is within the tail - the damn thing is
allocated (tail can't contain holes).

Let's do a plain lookup and if the fragment is present, we can
just pretend that we'd won the race in almost all cases.  The
only exception is a fragment between the end of tail and the
end of block containing tail.

Protect ->i_lastfrag with ->meta_lock - read_seqlock_excl() is
sufficient.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-15 00:41:18 -04:00
Prarit Bhargava
036e9ef8be dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
The WARN_TAINT_ONCE() prints out a loud stack trace on broken BIOSes.
The systems that have this problem are several years out of support and
no longer have BIOS updates available.  The stack trace isn't necessary
and a pr_warn_once() will do.

Change WARN_TAINT_ONCE() to pr_warn_once() and taint.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Duyck, Alexander H <alexander.h.duyck@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-15 09:50:37 +05:30
Fabio Estevam
d762e4f356 dmaengine: Kconfig: Extend the dependency for MXS_DMA
Currently it is not possible to select the mxs dma driver when only
mx6sx or mx7 are selected.

Extend the dependency to allow the mxs dma driver to be built whenever
ARCH_MXS or ARCH_MXC is selected.

This has the benefit to avoid having to add new entries in the
MXS_DMA Kconfig everytime a new i.MX SoC shows up and it also makes
it consistent with the other i.MX DMA engines, such as IMX_DMA and
IMX_SDMA.

While at it, also pass COMPILE_TEST for increasing the build coverage.

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-15 09:48:42 +05:30
Fabio Estevam
4aff2f9355 dmaengine: mxs: Use %zu for printing a size_t variable
Use %zu for printing a size_t variable in order to fix the following
build warning:

drivers/dma/mxs-dma.c: In function 'mxs_dma_prep_dma_cyclic':
drivers/dma/mxs-dma.c:621:5: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-15 09:44:45 +05:30
Jia-Ju Bai
640f93cc6e i40e: Fix a sleep-in-atomic bug
The driver may sleep under a spin lock, and the function call path is:
i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh)
  i40e_vsi_remove_pvid
    i40e_vlan_stripping_disable
      i40e_aq_update_vsi_params
        i40e_asq_send_command
          mutex_lock --> may sleep

To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and
the lock is acquired again after this function.

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14 23:45:22 -04:00
Al Viro
267309f394 ufs_get_locked_page(): make sure we have buffer_heads
callers rely upon that, but find_lock_page() racing with attempt of
page eviction by memory pressure might have left us with
	* try_to_free_buffers() successfully done
	* __remove_mapping() failed, leaving the page in our mapping
	* find_lock_page() returning an uptodate page with no
buffer_heads attached.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14 23:32:19 -04:00
Yuantian Tang
b6f5e70193 ARM: dts: ls1021a: update the clockgen node
qoriq clock driver has been updated to parse the clock configuration
information defined in driver itself not in dts.
Since the new implementation and the bindings have been merged,
it is time to update the clock related node and remove redundent clock
configuration information from the dts.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-15 11:28:20 +08:00
Christoph Hellwig
b014e96d1a PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()
Every method in struct device_driver or structures derived from it like
struct pci_driver MUST provide exclusion vs the driver's ->remove() method,
usually by using device_lock().

Protect use of pci_error_handlers->reset_notify() by holding the device
lock while calling it.

Note:

  - pci_dev_lock() calls device_lock() in addition to blocking user-space
    config accesses.

  - pci_err_handlers->reset_notify() is used inside
    pci_dev_save_and_disable() and pci_dev_restore().  We could hold the
    device lock directly in pci_reset_notify(), but we expand the region
    since we have several calls following each other.

Without this, ->reset_notify() may race with ->remove() calls, which can be
easily triggered in NVMe.

[bhelgaas: changelog, add pci_reset_notify() comment]
[bhelgaas: fold in fix from Dan Carpenter <dan.carpenter@oracle.com>:
http://lkml.kernel.org/r/20170701135323.x5vaj4e2wcs2mcro@mwanda]
Link: http://lkml.kernel.org/r/20170601111039.8913-2-hch@lst.de
Reported-by: Rakesh Pandit <rakesh@tuxera.com>
Tested-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-14 21:49:13 -05:00
Leonard Crestez
9b00064ba7 ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
Setting trip points is supported by the imx thermal driver and it is
useful to be able to test this without adjusting config.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-15 09:35:09 +08:00
Dawid Kurek
d35fb61759 drm: Remove duplicate forward declaration
Forward declarations in C are great but I'm pretty sure one is enough.

Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170614213518.GA3554@gmail.com
2017-06-14 21:25:17 -04:00
Tim Bird
48e42f91c1 kselftest: convert get_size to use stricter TAP13 format
1. Add the TAP13 header
2. remove variable data from the test description line
3. move the plan count to the end of the file, for consistency with
other kselftests
4. convert memory data from diagnostic (comment) format, to a YAML block

Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-14 18:23:27 -06:00
Rafael J. Wysocki
9522933454 Merge branch 'acpica-fixes'
* acpica-fixes:
  ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance
  Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
2017-06-15 01:52:32 +02:00
Rafael J. Wysocki
f63e4f7d41 Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'
* pm-cpufreq:
  cpufreq: conservative: Allow down_threshold to take values from 1 to 10
  Revert "cpufreq: schedutil: Reduce frequencies slower"

* pm-cpuidle:
  cpuidle: dt: Add missing 'of_node_put()'

* pm-devfreq:
  PM / devfreq: exynos-ppmu: Staticize event list
  PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable
  PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
2017-06-15 01:51:33 +02:00
Stephen Boyd
9c861f3328 Merge branch 'clk-fixes' into clk-next
* clk-fixes:
  clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM
  clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM
  dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks
  clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM
  clk: sunxi-ng: v3s: Fix usb otg device reset bit
  clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
2017-06-14 16:48:21 -07:00
Stephen Boyd
949bdfed4b Allwinner clock fixes for 4.12
Some fixes that fix some bindings that went in 4.12, fix a few reset and
 clock offsets and a build error fix
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZQYutAAoJEBx+YmzsjxAglWMQALkuMBskgMNE78L9M3kgNoOs
 e44VWQLI0K0fOHyrnG1Y8wGy8pzTFXVhk13M8eJM9ELeVwN2hnwplcwooxt/I/Og
 9B95qjDFSD4yTsE0SdcyT2KB6NXX6qrh/Wv5Q4ixi1vr09DGZ52jdbug+h0fLZxM
 e1akTgv6oIQRdr1S4WykxnDDhNvooNV9Qgn4zKObwP2euTuRlllhPt+dj8rvgJzh
 z23m6b296MbYh0hb2t0uqocQwkyOVHa9rtdCTVJFPaOeb+kjxl5NuFZzG/hrBRUm
 +LbXwy0acst5SAdDDPGEYTnxyREB+vVYKF22i2+jSf3vTxRWZrZQkPlSs+0LtMLZ
 LtLPUIdwFWdps/kY1IFjt0UeBw6mnv3LCv1dSciazRZDKexvzrWaNEZ942oS0Iqw
 N7tltUEf4UJFZsgCY+yY+C4WL0QXsWtmVKFJDYtr2/yhgC1SpDNZP20DomwVMZ6G
 i7SP+5uyCf7TNRXvckTfz3q0747f1V0yD9a0vR/cR5+TCmKChLIUava95/07qvy8
 +AbSz9g2n7sKZTn+z3UUDuln9XTXGcy29SXigSXneeiFV1tjHUssZueLPvb/4EA9
 LlNMr2JWG7Ois6H655512K6fvMUlqNvWpbdfnB45raPLU7AGa1xc95QXo7fMcfo/
 6wxUN+7nhPDO8AXZmc7w
 =G33o
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clk-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes

Allwinner clock fixes for 4.12

Some fixes that fix some bindings that went in 4.12, fix a few reset and
clock offsets and a build error fix

* tag 'sunxi-clk-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM
  clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM
  dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks
  clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM
  clk: sunxi-ng: v3s: Fix usb otg device reset bit
  clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
2017-06-14 16:48:03 -07:00
Rafael J. Wysocki
33e4f80ee6 ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle
The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ
during suspend-to-idle transitions and, consequently, any events
signaled through it wake up the system from that state.  However,
on some systems some of the events signaled via the ACPI SCI while
suspended to idle should not cause the system to wake up.  In fact,
quite often they should just be discarded.

Arguably, systems should not resume entirely on such events, but in
order to decide which events really should cause the system to resume
and which are spurious, it is necessary to resume up to the point
when ACPI SCIs are actually handled and processed, which is after
executing dpm_resume_noirq() in the system resume path.

For this reasons, add a loop around freeze_enter() in which the
platforms can process events signaled via multiplexed IRQ lines
like the ACPI SCI and add suspend-to-idle hooks that can be
used for this purpose to struct platform_freeze_ops.

In the ACPI case, the ->wake hook is used for checking if the SCI
has triggered while suspended and deferring the interrupt-induced
system wakeup until the events signaled through it are actually
processed sufficiently to decide whether or not the system should
resume.  In turn, the ->sync hook allows all of the relevant event
queues to be flushed so as to prevent events from being missed due
to race conditions.

In addition to that, some ACPI code processing wakeup events needs
to be modified to use the "hard" version of wakeup triggers, so that
it will cause a system resume to happen on device-induced wakeup
events even if the "soft" mechanism to prevent the system from
suspending is not enabled.  However, to preserve the existing
behavior with respect to suspend-to-RAM, this only is done in
the suspend-to-idle case and only if an SCI has occurred while
suspended.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-15 00:55:44 +02:00
Hans de Goede
63dada87f7 platform/x86: Add driver for ACPI INT0002 Virtual GPIO device
Some peripherals on Bay Trail and Cherry Trail platforms signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system. When this happens software needs to explicitly
clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
IRQ storm on IRQ 9.

This is modelled in ACPI through the INT0002 ACPI device, which is
called a "Virtual GPIO controller" in ACPI because it defines the
event handler to call when the PME triggers through _AEI and _L02
methods as would be done for a real GPIO interrupt in ACPI.

This commit adds a driver which registers the Virtual GPIOs expected
by the DSDT on these devices, letting gpiolib-acpi claim the
virtual GPIO and install a GPIO-interrupt handler which call the _L02
handler as it would for a real GPIO controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-15 00:55:44 +02:00
Rafael J. Wysocki
dc15e71eef PCI / PM: Restore PME Enable if skipping wakeup setup
The wakeup_prepared PCI device flag is used for preventing subsequent
changes of PCI device wakeup settings in the same way (e.g. enabling
device wakeup twice in a row).

However, in some cases PME Enable may be updated by things like PCI
configuration space restoration in the meantime and it may need to be
set again even though the rest of the settings need not change, so
modify __pci_enable_wake() to do that when it is about to return
early.

Also, it is reasonable to expect that __pci_enable_wake() will always
clear PME Status when invoked to disable device wakeup, so make it do
so even if it is going to return early then.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-15 00:55:44 +02:00
Rafael J. Wysocki
604d895857 PM / sleep: Print timing information if debug is enabled
Avoid printing the device suspend/resume timing information if
CONFIG_PM_DEBUG is not set to reduce the log noise level.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-15 00:55:43 +02:00
Rafael J. Wysocki
235d81a630 ACPI / PM: Clean up device wakeup enable/disable code
The wakeup.flags.enabled flag in struct acpi_device is not used
consistently, as there is no reason why it should only apply
to the enabling/disabling of the wakeup GPE, so put the invocation
of acpi_enable_wakeup_device_power() under it too.

Moreover, it is not necessary to call
acpi_enable_wakeup_devices() and acpi_disable_wakeup_devices() for
suspend-to-idle, so don't do that.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-15 00:55:43 +02:00
Rafael J. Wysocki
190cab8471 ACPI / PM: Change log level of wakeup-related message
Change the log level of the "System wakeup enabled/disabled by ACPI"
message in acpi_pm_device_sleep_wake() to "debug" to reduce to log
noise level.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-15 00:55:43 +02:00
Rafael J. Wysocki
d438aa223e USB / PCI / PM: Allow the PCI core to do the resume cleanup
hcd_pci_resume_noirq() used as a universal _resume_noirq handler for
PCI USB controllers calls pci_back_from_sleep() which is unnecessary
and may become problematic.

It is unnecessary, because the PCI bus type carries out post-suspend
cleanup of all PCI devices during resume and that covers all things
done by the pci_back_from_sleep().  There is no reason why USB cannot
follow all of the other PCI devices in that respect.

It will become problematic after subsequent changes that make it
possible to go back to sleep again after executing dpm_resume_noirq()
if no valid system wakeup events have been detected at that point.
Namely, calling pci_back_from_sleep() at the _resume_noirq stage
will cause the wakeup status of the devices in question to be cleared
and if any of them has triggered system wakeup, that event may be
missed then.

For the above reasons, drop the pci_back_from_sleep() invocation
from hcd_pci_resume_noirq().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 00:55:43 +02:00
Rafael J. Wysocki
64fd1c7040 ACPI / PM: Run wakeup notify handlers synchronously
The work functions provided by the users of acpi_add_pm_notifier()
should be run synchronously before re-enabling the wakeup GPE in
case they are used to clear the status and/or disable the wakeup
signaling at the source.  Otherwise, which is the case currently in
the PCI bus type code, the same wakeup event may be signaled for
multiple times while the execution of the work function in response
to it has already been queued up.

Fortunately, acpi_add_pm_notifier() is only used by PCI and by
ACPI device PM code internally, so the change is relatively
straightforward to make.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-15 00:55:42 +02:00
Jakub Kicinski
17530e71e0 PCI: Protect pci_driver->sriov_configure() usage with device_lock()
Every method in struct device_driver or structures derived from it like
struct pci_driver MUST provide exclusion vs the driver's ->remove() method,
usually by using device_lock().

Protect use of pci_driver->sriov_configure() by holding the device lock
while calling it.

The PCI core sets the pci_dev->driver pointer in local_pci_probe() before
calling ->probe() and only clears it after ->remove().  This means driver's
->sriov_configure() callback will happily race with probe() and remove(),
most likely leading to BUGs, since drivers don't expect this.

Remove the iov lock completely, since we remove the last user.

[bhelgaas: changelog, thanks to Christoph for locking rule]
Link: http://lkml.kernel.org/r/20170522225023.14010-1-jakub.kicinski@netronome.com
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-14 17:41:19 -05:00
Al Viro
c596961d1b ufs: fix s_size/s_dsize users
For UFS2 we need 64bit variants; we even store them in uspi, but
use 32bit ones instead.  One wrinkle is in handling of reserved
space - recalculating it every time had been stupid all along, but
now it would become really ugly.  Just calculate it once...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14 16:43:03 -04:00
H. Nikolaus Schaller
5e6eb025b0 power: supply: twl4030-charger: move allocation of iio channel to the beginning
This is in prepraration for EPROBE_DEFER handling because it is quite
likely that geting the (madc) iio channel is deferred more often than
later steps.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-14 22:10:44 +02:00
H. Nikolaus Schaller
e8847c5654 power: supply: twl4030-charger: allocate iio by devm_iio_channel_get() and fix error path
Suggested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-14 22:10:43 +02:00
Arvind Yadav
355679b270 power: supply: core: constify psy_tcd_ops.
File size before:
text	data	bss	dec   hex filename
4240	 200	 80	4520 11a8 drivers/power/supply/power_supply_core.o

File size After adding 'const':
text	data	bss	dec   hex filename
4296	 136	 80	4512 11a0 drivers/power/supply/power_supply_core.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-14 22:10:43 +02:00
Tony Lindgren
1b0c6806d6 dt-bindings: power: supply: cpcap-battery: Add power-supplies property
The binding for cpcap-battery is missing the standard power-supplies
property as noted by Sebastian Reichel <sebastian.reichel@collabora.co.uk>.

Cc: devicetree@vger.kernel.org
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-14 22:10:42 +02:00
Sebastian Reichel
c159b38333 dt-bindings: power: supply: move max8903-charger.txt to proper location
This moves max8903-charger.txt to proper location
for power-supply bindings.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-14 22:10:37 +02:00
Sebastian Reichel
a9b819f5fb dt-bindings: power: supply: move maxim,max14656.txt to proper location
This moves maxim,max14656.txt to proper location for
power-supply bindings.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-06-14 22:10:26 +02:00
Tejun Heo
b6053d40e3 cgroup: fix lockdep warning in debug controller
The debug controller grabs cgroup_mutex from interface file show
functions which can deadlock and triggers lockdep warnings.  Fix it by
using cgroup_kn_lock_live()/cgroup_kn_unlock() instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
2017-06-14 16:01:41 -04:00
Tejun Heo
2866c0b4cf cgroup: refactor cgroup_masks_read() in the debug controller
Factor out cgroup_masks_read_one() out of cgroup_masks_read() for
simplicity.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
2017-06-14 16:01:36 -04:00
Tejun Heo
8cc38fa7fa cgroup: make debug an implicit controller on cgroup2
Make debug an implicit controller on cgroup2 which is enabled by
"cgroup_debug" boot param.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
2017-06-14 16:01:32 -04:00
Waiman Long
575313f40f cgroup: Make debug cgroup support v2 and thread mode
Besides supporting cgroup v2 and thread mode, the following changes
are also made:
 1) current_* cgroup files now resides only at the root as we don't
    need duplicated files of the same function all over the cgroup
    hierarchy.
 2) The cgroup_css_links_read() function is modified to report
    the number of tasks that are skipped because of overflow.
 3) The number of extra unaccounted references are displayed.
 4) The current_css_set_read() function now prints out the addresses of
    the css'es associated with the current css_set.
 5) A new cgroup_subsys_states file is added to display the css objects
    associated with a cgroup.
 6) A new cgroup_masks file is added to display the various controller
    bit masks in the cgroup.

tj: Dropped thread mode related information for now so that debug
    controller changes aren't blocked on the thread mode.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-14 16:01:21 -04:00
Waiman Long
23b0be480f cgroup: Make Kconfig prompt of debug cgroup more accurate
The Kconfig prompt and description of the debug cgroup controller
more accurate by saying that it is for debug purpose only and its
interfaces are unstable.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-14 16:01:21 -04:00
Waiman Long
a28f8f5e99 cgroup: Move debug cgroup to its own file
The debug cgroup currently resides within cgroup-v1.c and is enabled
only for v1 cgroup. To enable the debug cgroup also for v2, it makes
sense to put the code into its own file as it will no longer be v1
specific. There is no change to the debug cgroup specific code.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-14 16:01:21 -04:00
Waiman Long
73a7242a06 cgroup: Keep accurate count of tasks in each css_set
The reference count in the css_set data structure was used as a
proxy of the number of tasks attached to that css_set. However, that
count is actually not an accurate measure especially with thread mode
support. So a new variable nr_tasks is added to the css_set to keep
track of the actual task count. This new variable is protected by
the css_set_lock. Functions that require the actual task count are
updated to use the new variable.

tj: s/task_count/nr_tasks/ for consistency with cgroup_root->nr_cgrps.
    Refreshed on top of cgroup/for-v4.13 which dropped on
    css_set_populated() -> nr_tasks conversion.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-14 16:01:21 -04:00
Al Viro
b451cec4bb ufs: fix reserved blocks check
a) honour ->s_minfree; don't just go with default (5)
b) don't bother with capability checks until we know we'll need them

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14 15:46:05 -04:00
David Howells
f7aec129a3 rxrpc: Cache the congestion window setting
Cache the congestion window setting that was determined during a call's
transmission phase when it finishes so that it can be used by the next call
to the same peer, thereby shortcutting the slow-start algorithm.

The value is stored in the rxrpc_peer struct and is accessed without
locking.  Each call takes the value that happens to be there when it starts
and just overwrites the value when it finishes.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14 15:42:45 -04:00
Weilin Chang
0430a26054 liquidio: fix VF driver off-by-one bug when setting ethtool -C ethX rx-frames
Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14 15:42:20 -04:00
Al Viro
fffd70f588 ufs: make ufs_freespace() return signed
as it is, checking that its return value is <= 0 is useless and
that's how it's being used.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-14 15:36:31 -04:00
Jesper Dangaard Brouer
849a44de91 net: don't global ICMP rate limit packets originating from loopback
Florian Weimer seems to have a glibc test-case which requires that
loopback interfaces does not get ICMP ratelimited.  This was broken by
commit c0303efeab ("net: reduce cycles spend on ICMP replies that
gets rate limited").

An ICMP response will usually be routed back-out the same incoming
interface.  Thus, take advantage of this and skip global ICMP
ratelimit when the incoming device is loopback.  In the unlikely event
that the outgoing it not loopback, due to strange routing policy
rules, ICMP rate limiting still works via peer ratelimiting via
icmpv4_xrlim_allow().  Thus, we should still comply with RFC1812
(section 4.3.2.8 "Rate Limiting").

This seems to fix the reproducer given by Florian.  While still
avoiding to perform expensive and unneeded outgoing route lookup for
rate limited packets (in the non-loopback case).

Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: "H.J. Lu" <hjl.tools@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14 15:33:58 -04:00
Dan Carpenter
f5165a5492 net/mlxfw: fix a NULL dereference
If we hit this error path we end up returning ERR_PTR(0) which is NULL.
The caller is not expecting that so it results in a NULL dereference.

Fixes: 410ed13cae ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14 15:32:18 -04:00
Lionel Landwerlin
28c7ef9ecc drm/i915/perf: add GLK support
Add OA support for Geminilake (pretty much identical to Broxton), and
also add the associated OA configurations.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170613112309.4088-2-lionel.g.landwerlin@intel.com
2017-06-14 12:31:58 -07:00
Lionel Landwerlin
6c5c1d89af drm/i915/perf: add KBL support
Add OA support for Kabylake (pretty much identical to Skylake), and
also add the associated OA configurations.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2017-06-14 12:31:58 -07:00
Lionel Landwerlin
3891589eee drm/i915: add KBL GT2/GT3 check macros
Add macros to detect GT2/GT3 skus so we can apply the proper OA
configuration later.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2017-06-14 12:31:57 -07:00
Robert Bragg
1bef3409f1 drm/i915/perf: remove perf.hook_lock
In earlier iterations of the i915-perf driver we had a number of
callbacks/hooks from other parts of the i915 driver to e.g. notify us
when a legacy context was pinned and these could run asynchronously with
respect to the stream file operations and might also run in atomic
context.

dev_priv->perf.hook_lock had been for serialising access to state needed
within these callbacks, but as the code has evolved some of the hooks
have gone away or are implemented to avoid needing to lock any state.

The remaining use of this lock was actually redundant considering how
the gen7 oacontrol state used to be updated as part of a context pin
hook.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2017-06-14 12:31:57 -07:00
Robert Bragg
155e941f49 drm/i915/perf: per-gen timebase for checking sample freq
An oa_exponent_to_ns() utility and per-gen timebase constants where
recently removed when updating the tail pointer race condition WA, and
this restores those so we can update the _PROP_OA_EXPONENT validation
done in read_properties_unlocked() to not assume we have a 12.5MHz
timebase as we did for Haswell.

Accordingly the oa_sample_rate_hard_limit value that's referenced by
proc_dointvec_minmax defining the absolute limit for the OA sampling
frequency is now initialized to (timestamp_frequency / 2) instead of the
6.25MHz constant for Haswell.

v2:
    Specify frequency of 19.2MHz for BXT (Ville)
    Initialize oa_sample_rate_hard_limit per-gen too (Lionel)

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2017-06-14 12:31:57 -07:00
Robert Bragg
fc59921178 drm/i915/perf: Add more OA configs for BDW, CHV, SKL + BXT
These are auto generated from an XML description of metric sets,
currently maintained in gputop, ref:

 https://github.com/rib/gputop
 > gputop-data/oa-*.xml
 > scripts/i915-perf-kernelgen.py

 $ make -C gputop-data -f Makefile.xml

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2017-06-14 12:31:57 -07:00