Commit graph

708,694 commits

Author SHA1 Message Date
Jiri Slaby
393cc3f511 fs/fcntl: f_setown, allow returning error
Allow f_setown to return an error value. We will fail in the next patch
with EINVAL for bad input to f_setown, so tile the path for the later
patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-06-14 08:46:36 -04:00
Bjorn Andersson
25bfee16d5 mailbox: Introduce Qualcomm APCS IPC driver
This implements a driver that exposes the IPC bits found in the APCS
Global block in various Qualcomm platforms. The bits are used to signal
inter-processor communication signals from the application CPU to other
masters.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-06-14 17:47:19 +05:30
Bjorn Andersson
f16c176e58 dt-bindings: mailbox: Introduce Qualcomm APCS global binding
Introduce a binding for the Qualcomm APCS global block, exposing a
mailbox for invoking interrupts on remote processors in the system.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-06-14 17:47:13 +05:30
Bjorn Andersson
b7133d6fcd mailbox: Make startup and shutdown ops optional
Some mailbox hardware doesn't have to perform any additional operations
on startup of shutdown, so make these optional.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2017-06-14 17:47:09 +05:30
Johannes Berg
68dd02d19c dev_ioctl: copy only the smaller struct iwreq for wext
Unfortunately, struct iwreq isn't a proper subset of struct ifreq,
but is still handled by the same code path. Robert reported that
then applications may (randomly) fault if the struct iwreq they
pass happens to land within 8 bytes of the end of a mapping (the
struct is only 32 bytes, vs. struct ifreq's 40 bytes).

To fix this, pull out the code handling wireless extension ioctls
and copy only the smaller structure in this case.

This bug goes back a long time, I tracked that it was introduced
into mainline in 2.1.15, over 20 years ago!

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195869

Reported-by: Robert O'Callahan <robert@ocallahan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-14 13:52:44 +02:00
Chris Packham
ff0abed492 EDAC, altera: Simplify calculation of total memory
Use of_address_to_resource() and resource_size() instead of manually
parsing the "reg" property from the "memory" node(s).

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170606235500.22772-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-14 13:49:25 +02:00
Johannes Berg
4f39a1f587 wireless: wext: use struct iwreq earlier in the call chain
To make it clear that we never use struct ifreq, cast from it
directly in the wext entrypoint and use struct iwreq from there
on. The next patch will remove the cast again and pass the
correct struct from the beginning.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-06-14 13:37:42 +02:00
Takashi Sakamoto
ba61faf0d7 ALSA: pcm: remove SNDRV_PCM_IOCTL1_GSTATE internal command
SNDRV_PCM_IOCTL1_GSTATE was firstly introduced in v0.9.0, however never
be used and the purpose is missing.

This commit removes the long-abandoned command, bye.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14 13:04:12 +02:00
Takashi Sakamoto
e11f0f90a6 ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO internal command
Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests
from ALSA PCM core. These requests are internal purpose in kernel land.
Usually common set of operations are used for it.

SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment,
it has been obsoleted in the old days.

We can see old releases in ftp.alsa-project.org. The command was firstly
introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to
fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release,
this was obsoleted by the other commands for ioctl(2) such as
SNDRV_PCM_IOCTL_CHANNEL_INFO.

This commit removes the long-abandoned command, bye.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14 13:04:03 +02:00
Alexandre Belloni
92c8f7c0e1 tty/serial: atmel: make the driver DT only
Now that AVR32 is gone, platform_data are not used to initialize the driver
anymore, remove that path from the driver. Also remove the now unused
struct atmel_uart_data.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:48:48 +02:00
Alexandre Belloni
274a5ed6d8 tty/serial: atmel: remove atmel_default_console_device handling
atmel_default_console_device was only used by AVR32, in particular
arch/avr32/mach-at32ap/at32ap700x.c which is now gone. Remove it from the
driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:48:48 +02:00
Dan Carpenter
ed6456afef Staging: rtl8723bs: fix an error code in isFileReadable()
The caller only cares about zero vs non-zero so this code actually works
fine but we should be returning a negative error code instead of a valid
pointer casted to int.

Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:43:54 +02:00
Dan Carpenter
e747f64336 xfrm: NULL dereference on allocation failure
The default error code in pfkey_msg2xfrm_state() is -ENOBUFS.  We
added a new call to security_xfrm_state_alloc() which sets "err" to zero
so there several places where we can return ERR_PTR(0) if kmalloc()
fails.  The caller is expecting error pointers so it leads to a NULL
dereference.

Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-06-14 12:40:49 +02:00
Dan Carpenter
1e3d0c2c70 xfrm: Oops on error in pfkey_msg2xfrm_state()
There are some missing error codes here so we accidentally return NULL
instead of an error pointer.  It results in a NULL pointer dereference.

Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-06-14 12:40:49 +02:00
Mike Gerow
b429f96aa5 video: fbdev: udlfb: drop log level for blanking
Drop log level for blanking from info to debug. Xorg likes to habitually
unblank when already unblanked and this can fill up logs over a long period
of time.

Signed-off-by: Mike Gerow <gerow@google.com>
Cc: bernie@plugable.com
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-06-14 12:40:36 +02:00
Arnd Bergmann
484c7bbf26 video: fbdev: via: remove possibly unused variables
When CONFIG_PROC_FS is disabled, we get warnings about unused variables
as remove_proc_entry() evaluates to an empty macro.

drivers/video/fbdev/via/viafbdev.c: In function 'viafb_remove_proc':
drivers/video/fbdev/via/viafbdev.c:1635:4: error: unused variable 'iga2_entry' [-Werror=unused-variable]
drivers/video/fbdev/via/viafbdev.c:1634:4: error: unused variable 'iga1_entry' [-Werror=unused-variable]

These are easy to avoid by using the pointer from the structure.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-06-14 12:40:36 +02:00
Johan Hovold
1235185521 video: fbdev: add missing USB-descriptor endianness conversions
Add the missing endianness conversions when printing the USB
device-descriptor idVendor, idProduct and bcdDevice fields during probe.

Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-06-14 12:40:36 +02:00
Arnd Bergmann
c544ad18bd video: fbdev: avoid int-in-bool-context warning
gcc-7 suspects this code might be wrong because we use the
result of a multiplication as a bool:

drivers/video/fbdev/core/fbmon.c: In function 'fb_edid_add_monspecs':
drivers/video/fbdev/core/fbmon.c:1051:84: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]

It's actually fine, so let's add a comparison to zero to make
that clear to the compiler too.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-06-14 12:40:36 +02:00
Aliaksei Karaliou
d567b0fe2d staging: android: ion: Improve memory alloc style
Use variable name instead of structure name to get size
of memory to allocate as proposed by checkpatch.pl

Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:37:22 +02:00
Roman Storozhenko
1dbc269e95 staging: lustre: llite: Replace the symbolic file permission mode with the numeric one
Replaces S_IRWXUGO with 0777. The reason is that symbolic permissions
considered harmful:
https://lwn.net/Articles/696229/

Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:37:22 +02:00
Gabriel L. Somlo
1802d96eb6 staging: fsl-mc: fix typo in comment
Resolving checkpatch issue:
CHECK: 'successfuly' may be misspelled - perhaps 'successfully'?

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:26:42 +02:00
Fabian Wolff
845086076a staging: rtl8723bs: wifi_regd.c: insert blank line after declarations
This patch inserts a missing blank line after variable declarations.

Signed-off-by: Fabian Wolff <fabian.wolff@fau.de>
Signed-off-by: Mate Horvath <horvatmate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:26:42 +02:00
Fabian Wolff
2b385530ce staging: rtl8723bs: wifi_regd.c: adjust alignment to match open parenthesis
This patch adjusts the alignment of several lines to match their
respective opening parenthesis.

Signed-off-by: Fabian Wolff <fabian.wolff@fau.de>
Signed-off-by: Mate Horvath <horvatmate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:26:42 +02:00
Fabian Wolff
4276cfd3e2 staging: rtl8723bs: wifi_regd.c: remove superfluous spaces from pointer arguments
This patch implements the suggestions of checkpatch.pl to remove
unnecessary spaces before function pointer arguments as well as in
statements of the form "foo * bar" (which should be "foo *bar").

Signed-off-by: Fabian Wolff <fabian.wolff@fau.de>
Signed-off-by: Mate Horvath <horvatmate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:26:42 +02:00
Fabian Wolff
7bb619813a staging: rtl8723bs: wifi_regd.c: fix comment formatting
This patch improves the formatting of block comments and removes one
commented-out line of code entirely (keeping it would be redundant
thanks to version control).

Signed-off-by: Fabian Wolff <fabian.wolff@fau.de>
Signed-off-by: Mate Horvath <horvatmate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:26:42 +02:00
Fabian Wolff
a7941a0851 staging: rtl8723bs: wifi_regd.c: put spaces around binary operators
This patch adds spaces around the binary operators '-' and '+'.

Signed-off-by: Fabian Wolff <fabian.wolff@fau.de>
Signed-off-by: Mate Horvath <horvatmate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:26:42 +02:00
Olav Haugan
0a3bbcbdf2 staging: wlan-ng: prism2mib.c: Fix type cast issues
Fix the following sparse warnings:

prism2mib.c:717:45: warning: cast to restricted __le16
prism2mib.c:720:45: warning: incorrect type in assignment (different base types)
prism2mib.c:720:45:    expected unsigned short [unsigned] [addressable] [usertype] datalen
prism2mib.c:720:45:    got restricted __le16 [usertype] <noident>
prism2mib.c:755:22: warning: incorrect type in assignment (different base types)
prism2mib.c:755:22:    expected unsigned short [unsigned] [usertype] len
prism2mib.c:755:22:    got restricted __le16 [usertype] <noident>

Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 12:26:41 +02:00
Linus Walleij
c477990295 clocksource/drivers/fttmr010: Factor out clock read code
The sched_clock() and delay timer callbacks can just call
each other and we can save an #ifdef.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14 12:02:50 +02:00
Linus Walleij
385c98fcc1 clocksource/drivers/fttmr010: Implement delay timer
This timer is often used on the ARM architecture, so as with so
many siblings, we can implement delay timers, removing the need
for the system to calibrate jiffys at boot, and potentially
handling CPU frequency scaling on targets.

We cannot just protect the Kconfig with a "depends on ARM" because
it is already known that different architectures are using Faraday
IP blocks, so it is better to make things open-ended and use

Result on boot dmesg:

Switching to timer-based delay loop, resolution 40n
Calibrating delay loop (skipped), value calculated using
  timer frequency.. 50.00 BogoMIPS (lpj=250000)

This is accurately the timer frequency, 250MHz on the APB
bus.

Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14 12:02:33 +02:00
Daniel Lezcano
dc11bae785 clocksource/drivers: Add timer-of common init routine
The different drivers are all using the same pattern when initializing.

 1. Get the base address
 2. Get the irq number
 3. Get the clock
 4. Prepare and enable the clock
 5. Get the rate
 6. Request an interrupt

Instead of repeating again and again these steps in all the drivers, let's
provide a common init routine to give the opportunity to factor all of them
out.

We can expect a significant kernel size improvement when the common routine
will be used in all the drivers.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14 12:02:32 +02:00
Alexandre Belloni
2a515e5d7c clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
On sama5d2, power to the core may be cut while entering suspend mode. It is
necessary to save and restore the TCB registers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14 12:02:31 +02:00
Linus Walleij
740e237add clocksource/drivers/fttmr010: Optimize sched_clock()
The sched_clock() call should be really fast so we want to
avoid an extra if() clause on the read path if possible.

Implement two sched_clock_read() functions, one if the timer
counts up and one if it counts down. Incidentally this also
mirrors how clocksource_mmio_init() works and make things
simple and easy to understand.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14 12:02:14 +02:00
Daniel Lezcano
8b7a3b5688 clocksource/drivers: Add an alias macro CLOCKSOURCE_OF_DECLARE
The macro CLOCKSOURCE_OF_DECLARE has been rename to TIMER_OF_DECLARE.

In order to prevent conflicts for the next merge window, a temporary
alias has been added which will be removed later.

Cc: Arnd Bergman <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14 12:02:01 +02:00
Daniel Lezcano
fa1bffab26 clocksource/drivers: Rename CLKSRC_ACPI to TIMER_ACPI
The config option name is now renamed to 'TIMER_ACPI' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 12:01:19 +02:00
Daniel Lezcano
bb0eb050a5 clocksource/drivers: Rename CLKSRC_OF to TIMER_OF
The config option name is now renamed to 'TIMER_OF' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 12:01:03 +02:00
Greg Kroah-Hartman
64c667fe29 Second set of IIO fixes for the 4.12 cycle.
* buffer-dma / buffer-dmaengine
   - Fix missing include of buffer_impl.h after the split of buffer.h.
   No driver in mainline is currently using these buffers so it wasn't
   picked up by automated build tests.
 
 * ad7152
   - Fix a deadlock in ad7152_write_raw_samp_freq as the chip_state lock
     was already held.
 * inv_mpu6050
   - Add low pass filter setting for chips newer than the MPU6500.  None of
     use previously picked up no the fact it was different on these newer
     chips.  It is separately set for the acceleration on these parts.  There
     is no normal reason to set it differently so the userspace interface
     remains the same as for early parts.
 * meson-saradc:
   - Fix a potential crash by NULL pointer dereference in
     meson_sar_adc_clear_fifo.
 * mxs-lradc
   - Fix a return value check where IS_ERR is used on a function that returns
     NULL on error
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAllARKwRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogGDQ/+Px3R3gtIha1velSGg8MU+pjYZpblhEtM
 GVfY+1uN0uEL9KHJqnnAPJHxlpkKr1BUg6fR7/EwJkRULg8YkWbSb2ZKcdZqiE+U
 LyEfLpZrNdw3P5q+u44LkX+HBvhr5QUqlnHj7fG8T7oG2W/mryVZPDTfv/gBXJo3
 SiiCv1HKWvdU99lrcALG1T/CZRx8PDrBKcxHhaTYWGFUmyIS67AGIRV3+khs7m9e
 pWgSd1iV2AUEhWaRQ/KSpbv9c7pvymjEq8AHCqTvXjc0kcwETUkxuiGXh8zI53Nr
 +rOzuB18RO+9o87uWSDBzfqntinMeIQYmgr471UsgpjaB0CDP/V8cGwnmzlf1/39
 gWm2PF5AReagkPaf8cMBUdTJJsUYNcGI9B8w9MNt5DRIxGWPsl/RhP4hd+h9Ncfx
 gHByZYVV3KEt0GCw6JweEmi4P+GgRpoFRAYBwhrlr6a6zau27q9LqjEenj1wNoA1
 VlTluEULB8HPDuDeI9wSFvzX2mOua4Ogo7QvKwDa+6QYukMbuOwaZ+/D7HxrFLzE
 XT7kcbuSXvVSQny+OHTRbYjq7VFMvYBURNkjQiSRL76ADO0VPt3sEafAsoiVVlIm
 C7NG/U8on051scb1VzmnEHeC0S5UkftCiBKrsIrWHU+6CiGpro7Avi9a+iar2hYj
 feFKQwMn978=
 =BU6h
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.12b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 4.12 cycle.

* buffer-dma / buffer-dmaengine
  - Fix missing include of buffer_impl.h after the split of buffer.h.
  No driver in mainline is currently using these buffers so it wasn't
  picked up by automated build tests.

* ad7152
  - Fix a deadlock in ad7152_write_raw_samp_freq as the chip_state lock
    was already held.
* inv_mpu6050
  - Add low pass filter setting for chips newer than the MPU6500.  None of
    use previously picked up no the fact it was different on these newer
    chips.  It is separately set for the acceleration on these parts.  There
    is no normal reason to set it differently so the userspace interface
    remains the same as for early parts.
* meson-saradc:
  - Fix a potential crash by NULL pointer dereference in
    meson_sar_adc_clear_fifo.
* mxs-lradc
  - Fix a return value check where IS_ERR is used on a function that returns
    NULL on error
2017-06-14 12:00:41 +02:00
Daniel Lezcano
2fcc112af3 clocksource/drivers: Rename clksrc table to timer
The table name is now renamed to 'timer' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 12:00:33 +02:00
Kuninori Morimoto
616c3b15f5 ASoC: audio-graph-scu-card: use asoc_simple_card_of_parse_tdm()
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-14 11:00:19 +01:00
Kuninori Morimoto
c98907d595 ASoC: audio-graph-card: use asoc_simple_card_of_parse_tdm()
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-14 11:00:16 +01:00
Kuninori Morimoto
77b713b528 ASoC: simple-scu-card: use asoc_simple_card_of_parse_tdm()
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-14 11:00:13 +01:00
Kuninori Morimoto
b93d2cf8c0 ASoC: simple-card: use asoc_simple_card_of_parse_tdm()
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-14 11:00:10 +01:00
Kuninori Morimoto
e68ba20744 ASoC: simple-card-utils: add asoc_simple_card_of_parse_tdm()
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's add asoc_simple_card_of_parse_tdm for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-14 11:00:07 +01:00
Daniel Lezcano
77d62f5322 clocksource/drivers: Rename CLOCKSOURCE_ACPI_DECLARE to TIMER_ACPI_DECLARE
The macro name is now renamed to 'TIMER_ACPI_DECLARE' for consistency
with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:59:53 +02:00
Daniel Lezcano
ba5d08c0ea clocksource/drivers: Rename clocksource_probe to timer_probe
The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:59:16 +02:00
Daniel Lezcano
1727339590 clocksource/drivers: Rename CLOCKSOURCE_OF_DECLARE to TIMER_OF_DECLARE
The CLOCKSOURCE_OF_DECLARE macro is used widely for the timers to declare the
clocksource at early stage. However, this macro is also used to initialize
the clockevent if any, or the clockevent only.

It was originally suggested to declare another macro to initialize a
clockevent, so in order to separate the two entities even they belong to the
same IP. This was not accepted because of the impact on the DT where splitting
a clocksource/clockevent definition does not make sense as it is a Linux
concept not a hardware description.

On the other side, the clocksource has not interrupt declared while the
clockevent has, so it is easy from the driver to know if the description is
for a clockevent or a clocksource, IOW it could be implemented at the driver
level.

So instead of dealing with a named clocksource macro, let's use a more generic
one: TIMER_OF_DECLARE.

The patch has not functional changes.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:58:45 +02:00
Kuninori Morimoto
a83ac48609 ASoC: ak4613: add missing 64000 in ak4613_dai_hw_params()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-14 10:56:19 +01:00
Chris Wilson
290271de34 drm/i915: Spin for struct_mutex inside shrinker
Having resolved whether or not we would deadlock upon a call to
mutex_lock(&dev->struct_mutex), we can then spin for the contended
struct_mutex if we are not the owner. We cannot afford to simply block
and wait for the mutex, as the owner may itself be waiting for the
allocator -- i.e. a cyclic deadlock. This should significantly improve
the chance of running the shrinker for other processes whilst the GPU is
busy.

A more balanced approach would be to optimistically spin whilst the
mutex owner was on the cpu and there was an opportunity to acquire the
mutex for ourselves quickly. However, that requires support from
kernel/locking/ and a new mutex_spin_trylock() primitive.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-06-14 10:55:11 +01:00
Greg Kroah-Hartman
d565ed38d0 arm: mach-rpc: ecard: fix build error
The last commit from me had a missing ';' which broke the build.

Thanks to Arnd for pointing out the issue.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 11:54:29 +02:00
Qiuxu Zhuo
133e4455c9 EDAC, sb_edac: Avoid creating SOCK memory controller
Xiaolong Ye reported the following failure on Broadwell D server:

  EDAC sbridge: Some needed devices are missing
  EDAC MC: Removed device 0 for sbridge_edac.c Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0
  EDAC sbridge: Couldn't find mci handler
  EDAC sbridge: Failed to register device with error -19.

Broadwell D (only IMC0 per socket) and Broadwell X (IMC0 and IMC1 per
socket) use the same PCI device IDs for IMC0 per socket, then they
share pci_dev_descr_broadwell_table (n_imcs_per_sock=2). In this case,
Broadwell D wrongly creates the nonexistent SOCK EDAC memory controller
and reports above error messages, since it has no IMC1 per socket.

Avoid creating the nonexistent SOCK memory controller.

Reported-and-tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170608113351.25323-1-qiuxu.zhuo@intel.com
[ Massage. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2017-06-14 11:53:39 +02:00
Chris Wilson
0f6ab55d7a drm/i915: Only restrict noreclaim in the early shrink passes
In our first pass, we do not want to use reclaim at all as we want to
solely reap the i915 buffer caches (its purgeable pages). But we don't
mind it initiates IO or pulls via the FS (but it shouldn't anyway as we
say no to reclaim!). Just drop the GFP_IO constraint for simplicity.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170609110350.1767-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-06-14 10:53:37 +01:00