Vivien Didelot says:
====================
net: dsa: add cross-chip VLAN support
The current code in DSA does not support cross-chip VLAN. This means
that in a multi-chip environment such as this one (similar to ZII Rev B)
[CPU].................... (mdio)
(eth0) | : : :
_|_____ _______ _______
[__sw0__]--[__sw1__]--[__sw2__]
| | | | | | | | |
v v v v v v v v v
p1 p2 p3 p4 p5 p6 p7 p8 p9
adding a VLAN to p9 won't be enough to reach the CPU, until at least one
port of sw0 and sw1 join the VLAN as well and become aware of the VID.
This patchset makes the DSA core program the VLAN on the CPU and DSA
links itself, which brings seamlessly cross-chip VLAN support to DSA.
With this series applied*, the hardware VLAN tables of a 3-switch setup
look like this after adding a VLAN to only one port of the end switch:
# cat /sys/class/net/br0/bridge/default_pvid
42
# cat /sys/kernel/debug/mv88e6xxx/sw{0,1,2}/vtu
# ip link set up master br0 dev lan6
# cat /sys/kernel/debug/mv88e6xxx/sw{0,1,2}/vtu
VID FID SID 0 1 2 3 4 5 6
42 1 0 x x x x x = =
VID FID SID 0 1 2 3 4 5 6
42 1 0 x x x x x = =
VID FID SID 0 1 2 3 4 5 6 7 8 9
42 1 0 u x x x x x x x x =
('x' is excluded, 'u' is untagged, '=' is unmodified DSA and CPU ports.)
Completely removing a VLAN entry (which is currently the responsibility
of drivers anyway) is not supported yet since it requires some caching.
(*) the output is shown from this out-of-tree debugfs patch:
7b61a684b9.patch
Changes in v2:
- canonical incrementation (port++ instead of ++port)
- check CPU and DSA ports before purging a VLAN
- add Reviewed-by tags
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The mv88e6xxx driver currently tries to be smart and remove by itself a
VLAN entry from the VTU when the driven switch sees no user ports as
members of the VLAN.
This is bad in a multi-chip switch fabric, since a chip in between
others may have no bridge port members, but still needs to be aware of
the VID in order to correctly pass frames in the data path.
Now that the DSA core explicitly manages DSA and CPU ports, do not skip
them when checking remaining VLAN members.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the DSA core adds the CPU and DSA ports itself to the new VLAN
entry, there is no need to include them as members of this VLAN when
initializing a new VTU entry.
As of now, initialize a new VTU entry with all ports excluded.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a multi-chip switch fabric, it is currently the responsibility of the
driver to add the CPU or DSA (interconnecting chips together) ports as
members of a new VLAN entry. This makes the drivers more complicated.
We want the DSA drivers to be stupid and the DSA core being the one
responsible for caring about the abstracted switch logic and topology.
Make the DSA core program the CPU and DSA ports as part of the VLAN.
This makes all chips of the data path to be aware of VIDs spanning the
the whole fabric and thus, seamlessly add support for cross-chip VLAN.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the VLAN object is propagated to every switch chip of the
switch fabric, we can easily ensure that they all support the required
VLAN operations before modifying an entry on a single switch.
To achieve that, remove the condition skipping other target switches,
and add a bitmap of VLAN members, eventually containing the target port,
if we are programming the switch target.
This will allow us to easily add other VLAN members, such as the DSA or
CPU ports (to introduce cross-chip VLAN support) or the other port
members if we want to reduce hardware accesses later.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the target port membership of the VLAN entry in
mv88e6xxx_port_vlan_add where ds is scoped.
Allow the DSA core to call later the port_vlan_add operation for CPU or
DSA ports, by using the Unmodified membership for these ports, as in the
current behavior.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=0fbW
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-rewrite-20170607-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Tx length parameter
Here's a set of patches that allows someone initiating a client call with
AF_RXRPC to indicate upfront the total amount of data that will be
transmitted. This will allow AF_RXRPC to encrypt directly from source
buffer to packet rather than having to copy into the buffer and only
encrypt when it's full (the encrypted portion of the packet starts with a
length and so we can't encrypt until we know what the length will be).
The three patches are:
(1) Provide a means of finding out what control message types are actually
supported. EINVAL is reported if an unsupported cmsg type is seen, so
we don't want to set the new cmsg unless we know it will be accepted.
(2) Consolidate some stuff into a struct to reduce the parameter count on
the function that parses the cmsg buffer.
(3) Introduce the RXRPC_TX_LENGTH cmsg. This can be provided on the first
sendmsg() that contributes data to a client call request or a service
call reply. If provided, the user must provide exactly that amount of
data or an error will be incurred.
Changes in version 2:
(*) struct rxrpc_send_params::tx_total_len should be s64 not u64. Thanks to
Julia Lawall for reporting this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The atomisp css2400/Makefile includes a Makefile.common:
include $(srctree)/$(src)/../Makefile.common
Well, this file doesn't exist at the Kernel tree :-)
So, don't include it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bjorn Andersson says:
====================
Missing QRTR features
The QMUX specification covers packet routing as well as service life cycle and
discovery. The current implementation of qrtr supports the prior part, but in
order to fully implement service management on-top a few more parts are needed.
The first patch in the series serves the purpose of reducing duplication in
patch two and three.
The second and third patch adds two qrtr-level notifications required by the
specification, in order to notify local and remote service controllers about
dying clients.
The last patch serves the purpose of notifying local clients about the presence
of a local service register, allowing them to register services as well as
querying for remote registered services.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As the higher level communication only deals with "services" the
a service directory is required to keep track of local and remote
services. In order for qrtr clients to be informed about when the
service directory implementation is available some event needs to be
passed to them.
Rather than introducing support for broadcasting such a message in-band
to all open local sockets we flag each socket with ENETRESET, as there
are no other expected operations that would benefit from having support
from locally broadcasting messages.
Cc: Courtney Cavin <ccavin@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Per the QMUXv2 protocol specificiation a DEL_CLIENT message should be
broadcasted when an endpoint is disconnected.
The protocol specification does suggest that the router can keep track
of which nodes the endpoint has been communicating with to not wake up
sleeping remotes unecessarily, but implementation of this suggestion is
left for the future.
Cc: Courtney Cavin <ccavin@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Per the QMUX protocol specification a terminating node can send a BYE
control message to signal that the link is going down, upon receiving
this all information about remote services should be discarded and local
clients should be notified.
In the event that the link was brought down abruptly the router is
supposed to act like a BYE message has arrived. As there is no harm in
receiving an extra BYE from the remote this patch implements the latter
by injecting a BYE when the link to the remote is unregistered.
The name service will receive the BYE and can implement the notification
to the local clients.
Cc: Courtney Cavin <ccavin@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the allocation and filling in the control message header fields
to a separate function in order to reuse this in subsequent patches.
Cc: Courtney Cavin <ccavin@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The async sub-device was not unregistered in ad5820_remove() as it should
have been; do it now. Also remove the now-redundant
v4l2_device_unregister_subdev().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Depending on arch configs to include dirs is evil, and makes
harder to change drivers to work with COMPILE_TEST.
Replace them by obj-y.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The DaVinci VPIF capture driver V4L2 OF support was added after the V4L2
OF framework got removed. Switch VPIF capture driver to V4L2 fwnode.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Remove unnecessary variable assignments.
Addresses-Coverity-ID: 1226917
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DRAM supply shortage and poor memory pressure tracking in TCP
stack makes any change in SO_SNDBUF/SO_RCVBUF (or equivalent autotuning
limits) and tcp_mem[] quite hazardous.
TCPMemoryPressures SNMP counter is an indication of tcp_mem sysctl
limits being hit, but only tracking number of transitions.
If TCP stack behavior under stress was perfect :
1) It would maintain memory usage close to the limit.
2) Memory pressure state would be entered for short times.
We certainly prefer 100 events lasting 10ms compared to one event
lasting 200 seconds.
This patch adds a new SNMP counter tracking cumulative duration of
memory pressure events, given in ms units.
$ cat /proc/sys/net/ipv4/tcp_mem
3088 4117 6176
$ grep TCP /proc/net/sockstat
TCP: inuse 180 orphan 0 tw 2 alloc 234 mem 4140
$ nstat -n ; sleep 10 ; nstat |grep Pressure
TcpExtTCPMemoryPressures 1700
TcpExtTCPMemoryPressuresChrono 5209
v2: Used EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() as David
instructed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RCU_NOGP_WAKE_NOT, RCU_NOGP_WAKE, and RCU_NOGP_WAKE_FORCE flags
are used to mediate wakeups for the no-CBs CPU kthreads. The "NOGP"
really doesn't make any sense, so this commit does s/NOGP/NOCB/.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The synchronize_rcu_mult() function now detects duplicate requests
for the same grace-period flavor and waits only once for each flavor.
This commit therefore removes the ugly #ifdef from sched_cpu_deactivate()
because synchronize_rcu_mult(call_rcu, call_rcu_sched) now does what
the #ifdef used to be needed for.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Currently, doing synchronize_rcu_mult(call_rcu, call_rcu) might
(or might not) wait for two RCU grace periods. One approach is
of course "don't do that!", but in CONFIG_PREEMPT=n kernels,
synchronize_rcu_mult(call_rcu, call_rcu_sched) does exactly that.
This results in an ugly #ifdef in sched_cpu_deactivate().
This commit therefore makes __wait_rcu_gp() check for duplicates,
which in turn allows duplicates to be passed to synchronize_rcu_mult()
without risk of waiting twice on the same type of grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds DEBUG_OBJECTS_RCU_HEAD checking to detect call_srcu()
counterparts to double-free bugs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In Tiny SRCU, __srcu_read_lock() is a trivial function, outweighed by
its EXPORT_SYMBOL_GPL(), and on many architectures, its call sequence.
This commit therefore moves it to srcutiny.h so that it can be inlined.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit d160a727c4 ("srcu: Make SRCU be built by default") in response
to build errors, which were caused by code that included srcu.h
despite !SRCU. However, srcutiny.o is almost 2K of code, which is not
insignificant for those attempting to run the Linux kernel on IoT devices.
This commit therefore makes SRCU be once again optional, and adjusts
srcu.h to allow error-free inclusion in !SRCU kernel builds.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Comments can be helpful, but assertions carry more force. This commit
therefore adds lockdep_assert_held() and RCU_LOCKDEP_WARN() calls to
enforce lock-held and interrupt-disabled preconditions.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Comments can be helpful, but assertions carry more force. This
commit therefore adds lockdep_assert_held() and RCU_LOCKDEP_WARN()
calls to enforce lock-held and interrupt-disabled preconditions.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit makes srcu_bootup_announce() check for non-default values
of the auto-expedite holdoff time exp_holdoff and print a message if so.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because exp_holdoff is not used outside of srcutree.c, it can be static.
This commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates rcu_bootup_announce_oddness() to check additional
Kconfig options and module/boot parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a rcupdate_announce_bootup_oddness() function to
print out non-default values of significant kernel boot parameter
settings to aid in debugging.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds WARN_ON_ONCE() calls that trigger if either
rcu_sched_qs() or rcu_bh_qs() are invoked with preemption enabled.
In the immortal words of Peter Zijlstra: "these are much harder to ignore
than comments".
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit classifies tail recursion as an alternative way to write
a loop, with similar limitations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit documents the auto-expediting requirement satisfied by
commits 2da4b2a7fd ("srcu: Expedite first synchronize_srcu() when idle")
and 22607d66bb ("srcu: Specify auto-expedite holdoff time").
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, when running from a git archive, the testid.txt file contains
only the branch name, the output of "git status", and the SHA-1 of
the current HEAD. This is useful, but does not uniquely identify the
source code that was built. This commit therefore adds the output of
"git diff HEAD", which means that if two testid.txt files compare equal,
they correspond to exactly the same source code. Give or take the
possibility of SHA-1 collisions, that is. ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a writer_holdoff boot parameter to rcuperf, which is
intended to be used to test Tree SRCU's auto-expediting. This
boot parameter is in microseconds, and defaults to zero (that is,
disabled). Set it to a bit larger than srcutree.exp_holdoff,
keeping the nanosecond/microsecond conversion, to force Tree SRCU
to auto-expedite more aggressively.
This commit also adds documentation for this parameter, and fixes some
alphabetization while in the neighborhood.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Most OS distribution have awk in /usr/bin not in /bin
Without this patch, kernel-devsrc fails to build as
runtime dependency for srcu-cbmc script /bin/awk is
not found.
Signed-off-by: Kushwaha, Priyalee <priyalee.kushwaha@intel.com>
Acked-by: Lance Roy <ldr709@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Common-case use of rcuperf must set rcuperf.nreaders=0 and if not built
as a module, rcuperf.shutdown. This commit therefore sets the default
for rcuperf.nreaders to zero and sets the default for rcuperf.shutdown
to zero if rcuperf is built as a module and to one otherwise.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit rearranges Tiny SRCU's srcu_struct structure, substitutes
u8 for bool, and shrinks counters down to short.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Given that the plan is to retire Classic SRCU in the near future, this
commit reduces the number of CPUs dedicated to testing Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the only way to tell whether a given kernel is running
Classic, Tiny, or Tree SRCU is to look at the .config file, which
can easily be lost or associated with the wrong kernel. This commit
therefore has Classic and Tree SRCU identify themselves at boot time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a TINY rcuperf test scenario, which allows performance
testing of Tiny RCU and Tiny SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit changes "architecure" to the correct spelling,
"architecture".
Signed-off-by: Stan Drozd <drozdziak1@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is material describing the ordering guarantees provided by
spin_unlock_wait(), but it is not necessarily easy to find. This commit
therefore adds a docbook header comment to this function informally
describing its semantics.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
This commit explicitly states that surrounding a non-value-returning
atomic read-modify atomic operations provides full ordering, just as
is provided by value-returning atomic read-modify-write operations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a perf_type of "srcud", which species that rcuperf
test SRCU on a dynamically initialized srcu_struct.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There was a time when the expedited grace-period primitives
(synchronize_rcu_expedited(), synchronize_rcu_bh_expedited(), and
synchronize_sched_expedited()) used rather antisocial kernel
facilities like try_stop_cpus(). However, they have since been
housebroken to use only single-CPU IPIs, and typically cause less
disturbance than a scheduling-clock interrupt. Furthermore, this
disturbance can be eliminated entirely using NO_HZ_FULL on the
one hand or the rcupdate.rcu_normal boot parameter on the other.
This commit therefore removes checkpatch's complaints about use
of the expedited RCU primitives.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The sync_rcu_preempt_exp_done() function returns a logical expression,
but its return type is nevertheless int. This commit therefore changes
the return type to bool.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a Kconfig-fragment file for Classic SRCU to ease
performance comparisons with Tree SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>