Commit graph

708,694 commits

Author SHA1 Message Date
Marek Szyprowski
5343b15792 ARM: dts: exynos: Add HDMI CEC device to Exynos5 SoC family
Exynos5250 and Exynos542x SoCs have the same CEC hardware module as
Exynos4 SoC series, so enable support for it using the same compatible
string.

Tested on Odroid XU3 (Exynos5422) and Google Snow (Exynos5250) boards.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-02 17:18:30 +02:00
Hans de Goede
75fb636324 drm: Fix oops + Xserver hang when unplugging USB drm devices
commit a39be606f9 ("drm: Do a full device unregister when unplugging")
causes backtraces like this one when unplugging an usb drm device while
it is in use:

usb 2-3: USB disconnect, device number 25
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:424
   drm_mode_config_cleanup+0x220/0x280 [drm]
...
RIP: 0010:drm_mode_config_cleanup+0x220/0x280 [drm]
...
Call Trace:
 gm12u320_modeset_cleanup+0xe/0x10 [gm12u320]
 gm12u320_driver_unload+0x35/0x70 [gm12u320]
 drm_dev_unregister+0x3c/0xe0 [drm]
 drm_unplug_dev+0x12/0x60 [drm]
 gm12u320_usb_disconnect+0x36/0x40 [gm12u320]
 usb_unbind_interface+0x72/0x280
 device_release_driver_internal+0x158/0x210
 device_release_driver+0x12/0x20
 bus_remove_device+0x104/0x180
 device_del+0x1d2/0x350
 usb_disable_device+0x9f/0x270
 usb_disconnect+0xc6/0x260
...
[drm:drm_mode_config_cleanup [drm]] *ERROR* connector Unknown-1 leaked!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 242 at drivers/gpu/drm/drm_mode_config.c:458
   drm_mode_config_cleanup+0x268/0x280 [drm]
...
<same Call Trace>
---[ end trace 80df975dae439ed6 ]---
general protection fault: 0000 [#1] SMP
...
Call Trace:
 ? __switch_to+0x225/0x450
 drm_mode_rmfb_work_fn+0x55/0x70 [drm]
 process_one_work+0x193/0x3c0
 worker_thread+0x4a/0x3a0
...
RIP: drm_framebuffer_remove+0x62/0x3f0 [drm] RSP: ffffb776c39dfd98
---[ end trace 80df975dae439ed7 ]---

After which the system is unusable this is caused by drm_dev_unregister
getting called immediately on unplug, which calls the drivers unload
function which calls drm_mode_config_cleanup which removes the framebuffer
object while userspace is still holding a reference to it.

Reverting commit a39be606f9 ("drm: Do a full device unregister
when unplugging") leads to the following oops on unplug instead,
when userspace closes the last fd referencing the drm_dev:

sysfs group 'power' not found for kobject 'card1-Unknown-1'
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2459 at fs/sysfs/group.c:237
   sysfs_remove_group+0x80/0x90
...
RIP: 0010:sysfs_remove_group+0x80/0x90
...
Call Trace:
 dpm_sysfs_remove+0x57/0x60
 device_del+0xfd/0x350
 device_unregister+0x1a/0x60
 drm_sysfs_connector_remove+0x39/0x50 [drm]
 drm_connector_unregister+0x5a/0x70 [drm]
 drm_connector_unregister_all+0x45/0xa0 [drm]
 drm_modeset_unregister_all+0x12/0x30 [drm]
 drm_dev_unregister+0xca/0xe0 [drm]
 drm_put_dev+0x32/0x60 [drm]
 drm_release+0x2f3/0x380 [drm]
 __fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbe ]---
BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
IP: down_write+0x1f/0x40
...
Call Trace:
 debugfs_remove_recursive+0x55/0x1b0
 drm_debugfs_connector_remove+0x21/0x40 [drm]
 drm_connector_unregister+0x62/0x70 [drm]
 drm_connector_unregister_all+0x45/0xa0 [drm]
 drm_modeset_unregister_all+0x12/0x30 [drm]
 drm_dev_unregister+0xca/0xe0 [drm]
 drm_put_dev+0x32/0x60 [drm]
 drm_release+0x2f3/0x380 [drm]
 __fput+0xdf/0x1e0
...
---[ end trace ecfb91ac85688bbf ]---

This is caused by the revert moving back to drm_unplug_dev calling
drm_minor_unregister which does:

        device_del(minor->kdev);
        dev_set_drvdata(minor->kdev, NULL); /* safety belt */
        drm_debugfs_cleanup(minor);

Causing the sysfs entries to already be removed even though we still
have references to them in e.g. drm_connector.

Note we must call drm_minor_unregister to notify userspace of the unplug
of the device, so calling drm_dev_unregister is not completely wrong the
problem is that drm_dev_unregister does too much.

This commit fixes drm_unplug_dev by not only reverting
commit a39be606f9 ("drm: Do a full device unregister when unplugging")
but by also adding a call to drm_modeset_unregister_all before the
drm_minor_unregister calls to make sure all sysfs entries are removed
before calling device_del(minor->kdev) thereby also fixing the second
set of oopses caused by just reverting the commit.

Fixes: a39be606f9 ("drm: Do a full device unregister when unplugging")
Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeffy <jeffy.chen@rock-chips.com>
Cc: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Reported-by: Marco Diego Aurélio Mesquita <marcodiegomesquita@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601115430.4113-1-hdegoede@redhat.com
2017-06-02 11:09:35 -04:00
Corentin Labbe
71ae3df244 drm: remove writeq/readq function definitions
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which
already have them.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170602112510.17544-1-clabbe.montjoie@gmail.com
2017-06-02 10:41:20 -04:00
David S. Miller
13fb6c2c7f Just two fixes:
* fix the per-CPU drop counters to not be added to the
    rx_packets counter, but really the drop counter
  * fix TX aggregation start/stop callback races by setting
    bits instead of allocating and queueing an skb
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEExu3sM/nZ1eRSfR9Ha3t4Rpy0AB0FAlkxbE0ACgkQa3t4Rpy0
 AB0vlA/8DJ/EccfrzUulYgz7N6e3eZnLV0PL5HG4QLFhS+iL71EkGMgX66PrTpJf
 0J308+VuNI/B0n48NF3NOUIg57yiF8i/VulxqR1FNYXdOfLXc5gc9Ca4oSOOlzHr
 z+CrCm2Z4GLwAZrketrUKuQBoPL8UXY3UKp4OzQoOCk50UujszInlRzXqlLdUHIE
 If+lg7O+Uq9udGb0WjH845H/GkjEiy5+4rM64pCkmu+rcPhb9uXbC9JI3b3SRu2j
 VeXl0ShaEEGA971JdncQ20x91rpadItJgnCm0bJ+zNwxZT5JakXW+ZUJGn2EKEqw
 hPvlvMgBzeAeLsCaRiQJspVdNHlgUa1nNTmn2n7R7+qn6LXuI7tZcj4UdOsn/Sfa
 eHTHc5irAiyp3ow6MAM+HgjH4/UHMbQg6HQMitVAGFO8Lluy1F1hIijP2amO0/It
 rHSINcDMi0Crn2rn+2tsYlU6pSzSJFS3kg+yfooK+C+pNl+Td0vH6n6EScvsKttG
 X6iAykbhPpjS/TrZg4RAPkFNqa7yooXXpvoIX1xtjUFRd1xUm6IE3O/6wN/l4X34
 QVyIQolw0LgWvoh3N3YZw7f9OFdc2AImnTU7XmHo6jYiZn4Y7+pO4x4OnAocw4aX
 SNXmqVwui7EjwGycDMohtOfFavTHC7KjoLRGBKONZXi7ZqqEKtI=
 =ZgHD
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2017-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just two fixes:
 * fix the per-CPU drop counters to not be added to the
   rx_packets counter, but really the drop counter
 * fix TX aggregation start/stop callback races by setting
   bits instead of allocating and queueing an skb
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:37:11 -04:00
David S. Miller
b260831182 Merge branch 'qed-Enhance-storage-APIs'
Yuval Mintz says:

====================
qed: Enhance storage APIs

This series is intended to add additional information and features
to the API between qed and its storage protocol drivers [qedi, qedf].

Patch #2 adds some information stored on device such as wwpn & wwnn
to allow qedf utilize it; #1 fixes an issue with the reading of those
values [which were unused until now].

Patch #3 would allow the protocol drivers access to images on persistent
storage which is a prerequirement for adding boot from SAN support.

Patch #4 adds infrastrucutre to a future feature for qedi.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:33:04 -04:00
Mintz, Yuval
dc4528e9e8 qed: Add support for changing iSCSI mac
Enhance API between qedi and qed, allowing qedi to inform device's
firmware when the iSCSI mac is to be changed.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:33:03 -04:00
Mintz, Yuval
20675b37ee qed: Support NVM-image reading API
Storage drivers require images from the nvram in boot-from-SAN
scenarios. This provides the necessary API between qed and the
protocol drivers to perform such reads.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:33:03 -04:00
Mintz, Yuval
3c5da94278 qed: Share additional information with qedf
Share several new tidbits with qedf:
 - wwpn & wwnn
 - Absolute pf-id [this one is actually meant for qedi as well]
 - Number of available CQs

While we're at it, now that qedf will be aware of the available CQs
we can add some validation on the inputs it provides.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:33:03 -04:00
Mintz, Yuval
5779675912 qed: Correct order of wwnn and wwpn
Driver reads values via HSI splitting this 8-byte into 2 32-bit
values and builds a single u64 field - but it does so by shifting
the lower field instead of the higher.
Luckily, we still don't use these fields for anything - but we're about
to start.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:33:02 -04:00
Florian Fainelli
ac2629a479 net: dsa: Move dsa_switch_{suspend,resume} out of legacy.c
dsa_switch_suspend() and dsa_switch_resume() are functions that belong in
net/dsa/dsa.c and are not part of the legacy platform support code.

Fixes: a6a71f19fe ("net: dsa: isolate legacy code")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:31:16 -04:00
Florian Westphal
8e71bf75ef selinux: use pernet operations for hook registration
It will allow us to remove the old netfilter hook api in the near future.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-06-02 10:27:46 -04:00
Florian Fainelli
d31353cd75 net: systemport: Fix missing Wake-on-LAN interrupt for SYSTEMPORT Lite
On SYSTEMPORT Lite, since we have the main interrupt source in the first
cell, the second cell is the Wake-on-LAN interrupt, yet the code was not
properly updated to fetch the second cell, and instead looked at the
third and non-existing cell for Wake-on-LAN.

Fixes: 44a4524c54 ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:25:56 -04:00
Zhang Shengju
3a5f8997dc team: add macro MODULE_ALIAS_TEAM_MODE for team mode alias
Add a new macro MODULE_ALIAS_TEAM_MODE to unify and simplify the
declaration of team mode alias.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02 10:20:49 -04:00
Andi Kleen
918c7b062a perf stat: Only print NMI watchdog hint when enabled
Only print the NMI watchdog hint when that watchdog it actually enabled.

This avoids printing these unnecessarily.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-lnw7edxnqsphkmeew857wz1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-02 11:15:34 -03:00
Lorenzo Pieralisi
cb7cf772d8 ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation
The BAD_MADT_GICC_ENTRY() macro checks if a GICC MADT entry passes
muster from an ACPI specification standpoint. Current macro detects the
MADT GICC entry length through ACPI firmware version (it changed from 76
to 80 bytes in the transition from ACPI 5.1 to ACPI 6.0 specification)
but always uses (erroneously) the ACPICA (latest) struct (ie struct
acpi_madt_generic_interrupt - that is 80-bytes long) length to check if
the current GICC entry memory record exceeds the MADT table end in
memory as defined by the MADT table header itself, which may result in
false negatives depending on the ACPI firmware version and how the MADT
entries are laid out in memory (ie on ACPI 5.1 firmware MADT GICC
entries are 76 bytes long, so by adding 80 to a GICC entry start address
in memory the resulting address may well be past the actual MADT end,
triggering a false negative).

Fix the BAD_MADT_GICC_ENTRY() macro by reshuffling the condition checks
and update them to always use the firmware version specific MADT GICC
entry length in order to carry out boundary checks.

Fixes: b6cfb27737 ("ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro")
Reported-by: Julien Grall <julien.grall@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Al Stone <ahs3@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-06-02 15:13:52 +01:00
Elaine Zhang
223c24be74 clk: rockchip: mark some special clk as critical on rk3368
The jtag clk no driver to handle them.
But this clk need enable,so make it as critical.

The ddrphy/ddrupctl clks no driver to handle them,
Chip design requirements for these clock to always on,

The pmu_hclk_otg0 is Chip design defect, must be always on,

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 15:57:32 +02:00
Chris Wilson
1d24ad457c drm/i915: Allow kswapd to pause the device whilst reaping
In commit 5763ff04dc ("drm/i915: Avoid GPU stalls from kswapd") we
stopped direct reclaim and kswapd from triggering GPU/client stalls
whilst running (by restricting the objects they could reap to be idle).

However with abusive GPU usage, it becomes quite easy to starve kswapd
of memory and prevent it from making forward progress towards obtaining
enough free memory (thus driving the system closer to swap exhaustion).
Relax the previous restriction to allow kswapd (but not direct reclaim)
to stall the device whilst reaping purgeable pages.

v2: Also acquire the rpm wakelock to allow kswapd to unbind buffers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601133331.5973-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
2017-06-02 14:54:27 +01:00
Elaine Zhang
55bb6a633c clk: rockchip: mark noc and some special clk as critical on rk3288
The atclk/dbg/jtag/hsic-xin12m/pclk_core clks no driver to handle them.
But this clks need enable,so make it as ignore_unused for now.

The ddrupctl0/ddrupctl1/publ0/publ1 clks no driver to handle them,
Chip design requirements for these clock to always on,

The pmu_hclk_otg0 is Chip design defect, must be always on,

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 15:54:20 +02:00
Elaine Zhang
f18c0994cd clk: rockchip: mark noc and some special clk as critical on rk3228
The jtag/bus/peri/initmem/rom/stimer/phy clks no driver to handle them.
But this clks need enable,so make it as critical.

The ddrupctl/ddrmon/ddrphy clks no driver to handle them,
Chip design requirements for these clock to always on,

The hclk_otg_pmu is Chip design defect, must be always on,
The new document will update the description of this clock.

All these non-noc/non-arbi clocks,IC suggest always on,
Because it's have some order limitation, between the NOC clock switch
and bus IDLE(or pd on/off).

The software is not very good to solve this constraint.
Always on these clocks, has no effect on the system power consumption.
The new document will update the description of these clock.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 15:51:11 +02:00
Yuantian Tang
0cee73f751 ahci: qoriq: add ls1088a platforms support
Ls1088a is new introduced arm-based soc with sata support with
following features:

* Complies with the serial ATA 3.0 specification
  and the AHCI 1.3.1 specification
* Contains a high-speed descriptor-based DMA controller
* Supports the following:
* Speeds of 1.5 Gb/s (first-generation SATA),
  3 Gb/s (second-generation SATA), and 6 Gb/s (third-generation SATA)
* FIS-based switching
* Native command queuing (NCQ) commands
* Port multiplier operation
* Asynchronous notification
* SATA Vendor BIST mode

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-02 09:49:33 -04:00
Elaine Zhang
f2893aaba4 clk: rockchip: mark pclk_ddrupctl as critical_clock on rk3036
No driver to handle this clk yet, but chip design requiress for this clock
supplying the ddr controller to be always on.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 15:42:38 +02:00
Weinan Li
ff8f797557 drm/i915: return the correct usable aperture size under gvt environment
I915_GEM_GET_APERTURE ioctl is used to probe aperture size from userspace.
In gvt environment, each vm only use the ballooned part of aperture, so we
should return the correct available aperture size exclude the reserved part
by balloon.

v2: add 'reserved' in struct i915_address_space to record the reserved size
in ggtt (Chris)

v3: remain aper_size as total, adjust aper_available_size exclude reserved
and pinned. UMD driver need to adjust the max allocation size according to
the available aperture size but not total size. KMD return the correct
usable aperture size any time (Chris, Joonas)

v4: decrease reserved in deballoon (Joonas)

v5: add onion teardown in balloon, add vgt_deballoon_space (Joonas)

v6: change title name (Zhenyu)

v7: code style refine (Joonas)

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1496198152-14175-1-git-send-email-weinan.z.li@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-06-02 14:28:46 +01:00
Elaine Zhang
f6022e88fa clk: rockchip: add clock controller for rk3128
Add the clock tree definition for the new rk3128 SoC.
And it also applies to the RK3126 SoC.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 14:49:35 +02:00
Elaine Zhang
de2ddc3b69 dt-bindings: add bindings for rk3128 clock controller
Add devicetree bindings for Rockchip cru which found on
Rockchip SoCs.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 14:49:26 +02:00
Elaine Zhang
5d2595627e clk: rockchip: export more rk3228 clocks ids
This patch exports related BUS/VPU/RGA/HDCP/IEP/TSP/WIFI/
VIO/USB/EFUSE/GPU/CRYPTO clocks for dts reference.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 14:48:40 +02:00
Eddie Cai
25fb42b1cf clk: rockchip: add ids for rk3399 testclks used for camera handling
clk_testout1 and clk_testout2 are used for camera handling, so add their ids.

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 14:48:38 +02:00
Heiko Stuebner
f08b559edf Merge branch 'v4.13-shared/clkids' into v4.13-clk/next 2017-06-02 14:48:32 +02:00
Harald Freudenberger
e385050873 s390/zcrypt: Fix blocking queue device after unbind/bind.
When the association between a queue device and the
driver is released via unbind and later re-associated
the queue device was not operational any more. Reason
was a wrong administration of the card/queue lists
within the ap device driver.

This patch introduces revised card/queue list handling
within the ap device driver: when an ap device is
detected it is initial not added to the card/queue list
any more. With driver probe the card device is added to
the card list/the queue device is added to the queue list
within a card. With driver remove the device is removed
from the card/queue list. Additionally there are some
situations within the ap device live where the lists
need update upon card/queue device release (for example
device hot unplug or suspend/resume).

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-06-02 14:30:12 +02:00
Elaine Zhang
b20841b9e0 clk: rockchip: add dt-binding header for rk3128
Add the dt-bindings header for the rk3128,
that gets shared between the clock controller and
the clock references in the dts.
Add softreset ID for rk3128.
And it also applies to the RK3126 SoC.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 14:17:05 +02:00
Carlo Caione
715e944f8a HID: asus: Stop underlying hardware on remove
We are missing a call to hid_hw_stop() on the remove hook.
Among other things this is causing an Oops when (re-)starting GNOME /
upowerd / ... after the module has been already rmmod-ed.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-06-02 14:13:22 +02:00
William Wu
81b61d3770 ARM: dts: rockchip: enable usb for rk3229 evb board
Rockchip's rk3229 evaluation board has one usb otg controller
and three usb host controllers. Each usb controller connect
with one usb2 phy port through UTMI+ interface. And the three
usb host interfaces use the same GPIO VBUS drive. Let's enable
them to support usb on rk3229 evb board.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 14:11:57 +02:00
William Wu
3880af4541 ARM: dts: rockchip: add usb nodes on rk322x
This patch adds usb otg/host controllers and phys nodes on rk322x.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-06-02 14:09:22 +02:00
Sara Sharon
d6d517b773 iwlwifi: add wait for tx queue empty
Now that we have 512 queues, add a wait for single TX
queue to gen2.
This replaces gen1 wait_tx_queues_empty, which was limited
to 32 queues.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:14:12 +03:00
Johannes Berg
3a07d36c2d iwlwifi: mvm: fix many kernel-doc warnings
Fix many kernel-doc warnings. In one case, this required adding
a new enum value to be able to document things properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:10:45 +03:00
Johannes Berg
e4eb275ac5 iwlwifi: mvm: remove unused REPLY_MAX
This value is unused, and there's no reason we'd ever use it.
Just remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:10:44 +03:00
Johannes Berg
69d22e737e iwlwifi: kernel-doc: make proper links
Using %enum instead of &enum (and in one case, %struct) results in
the wrong parsing. Fix that so that if documentation is generated,
the result is clickable links.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:10:44 +03:00
Johannes Berg
b1e06c65fb iwlwifi: mvm: remove unused TX_CMD_NEXT_FRAME_*
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:10:43 +03:00
Haim Dreyfuss
0705b953ee iwlwifi: Add fw_name_pre_rf_next_step to support different rf steps
Integrated chip may have different HW and RF steps.
Currently, the driver supports only different HW steps.
Add logic to support different RF steps enables combining different
HW and RF steps.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:10:41 +03:00
Liad Kaufman
5538409ba3 iwlwifi: pcie: support page dumping in wrt in gen2
In gen2, page dumping needs to be done in the trans
layer, as it is the one with access to the paging
pointers.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:54 +03:00
Liad Kaufman
2ba57c8bf9 iwlwifi: mvm: remove wrt support of page dumps in gen2
In gen2, page dumping should be done in transport
layer, since the addresses needed for the paging
mechanism reside there.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:53 +03:00
Johannes Berg
15fc196d6e iwlwifi: mvm: document structures used by commands
Add documentation to a lot of command IDs that links to the
appropriate structure(s) used with those IDs. In one case,
actually add and use a new struct for that purpose.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:53 +03:00
Johannes Berg
d69f0a2d88 iwlwifi: mvm: create/name various enums
Some values should be in enums so documentation can refer to
them, some values should be named for the same reason.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:52 +03:00
Johannes Berg
4d151c2e22 iwlwifi: mvm: disentangle binding command versions
The comments/size of the different binding commands get lost
in documentation, so introduce two different command structs
that can be used there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:52 +03:00
Sara Sharon
a85281ebde iwlwifi: update device ID for a000 family
Three configurations will share device ID 2720, and will
be differentiated by RF ID.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:51 +03:00
Johannes Berg
6762586517 iwlwifi: mvm: add documentation links to various fields
Link various fields to the documentation of the enums that
define their values.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:51 +03:00
Johannes Berg
31a658b2af iwlwifi: mvm: fix some kernel-doc
This mostly fixes missing tags/struct names, but also some other
things. Lots of issues remain though.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:50 +03:00
Sara Sharon
0b90964a26 iwlwifi: mvm: wait for the flushed queue only
The function flushed only agg queue and no more traffic
is queued on it.
However, it waits for all queues to empty, which is not
necessary and may take more time.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:50 +03:00
Johannes Berg
816dc0bc54 iwlwifi: mvm: add documentation to some WoWLAN commands
Add some documentation for the WoWLAN commands, also linking the
correct enums used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:50 +03:00
Johannes Berg
3b43fbcac4 iwlwifi: mvm: disentangle paging command structs
Instead of using a union and hard-coding the size difference,
declare both command structs properly, use a union on the
stack to build them and the right sizeof() for the size.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:49 +03:00
Johannes Berg
aed35826d6 iwlwifi: mvm: use u8 for reserved fields
There's no saying what kind of type a reserved field will
get in the future, so use u8 arrays to reserve space.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-02 14:07:49 +03:00