Commit graph

708,694 commits

Author SHA1 Message Date
Sudarsana Reddy Kalluru
05930d18c8 qed: Add missing static/local dcbx info
Some getters are not getting filled with the correct information
regarding local DCBx.

Fixes: 49632b5822 ("qed: Add support for static dcbx.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 12:07:01 -04:00
Colin Ian King
7421a1671a ALSA: pcm: include pcm_local.h and remove some extraneous tabs
We need to include pcm_local.h to clean up some smatch warnings:

symbol 'snd_pcm_timer_done' was not declared. Should it be static?
symbol 'snd_pcm_timer_init' was not declared. Should it be static?
symbol 'snd_pcm_timer_resolution_change' was not declared. Should
  it be static?

Also remove some extraneous tabs on empty lines and replace space
intentation with a tab.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-30 18:04:47 +02:00
David S. Miller
b11dabfd33 Merge branch 'net-more-extack'
David Ahern says:

====================
net: another round of extack handling for routing

This set focuses on passing extack through lwtunnel and MPLS with
additional catches for IPv4 route add and minor cleanups in MPLS
encountered passing the extack arg around.

v2
- mindful of bloat adding duplicate messages
  + refactored prefix and prefix length checks in ipv4's fib_table_insert
    and fib_table_del
  + refactored label check in mpls

- split mpls cleanups into 2 patches
  + move nla_get_via up in af_mpls to avoid forward declaration
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:34 -04:00
David Ahern
e1af005b1c net: mpls: remove unnecessary initialization of err
err is initialized to EINVAL and not used before it is set again.
Remove the unnecessary initialization.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:33 -04:00
David Ahern
d4e7256007 net: mpls: Make nla_get_via in af_mpls.c
nla_get_via is only used in af_mpls.c. Remove declaration from internal.h
and move up in af_mpls.c before first use. Code move only; no
functional change intended.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:33 -04:00
David Ahern
074350e2eb net: mpls: Add extack messages for route add and delete failures
Add error messages for failures in adding and deleting mpls routes.
This covers most of the annoying EINVAL errors.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:33 -04:00
David Ahern
b7b386f42f net: mpls: Pull common label check into helper
mpls_route_add and mpls_route_del have the same checks on the label.
Move to a helper. Avoid duplicate extack messages in the next patch.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:32 -04:00
David Ahern
a1f10abe12 net: Fill in extack for mpls lwt encap
Fill in extack for errors in build_state for mpls lwt encap including
passing extack to nla_get_labels and adding error messages for failures
in it.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:32 -04:00
David Ahern
9ae2872748 net: add extack arg to lwtunnel build state
Pass extack arg down to lwtunnel_build_state and the build_state callbacks.
Add messages for failures in lwtunnel_build_state, and add the extarg to
nla_parse where possible in the build_state callbacks.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:32 -04:00
David Ahern
c255bd681d net: lwtunnel: Add extack to encap attr validation
Pass extack down to lwtunnel_valid_encap_type and
lwtunnel_valid_encap_type_attr. Add messages for unknown
or unsupported encap types.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:31 -04:00
David Ahern
7805599895 net: ipv4: Add extack message for invalid prefix or length
Add extack error message for invalid prefix length and invalid prefix.
Example of the latter is a route spec containing 172.16.100.1/24, where
the /24 mask means the lower 8-bits should be 0. Amazing how easy that
one is to overlook when an EINVAL is returned.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:31 -04:00
David Ahern
ba277e8e05 net: ipv4: refactor key and length checks
fib_table_insert and fib_table_delete have the same checks on the prefix
and length. Refactor into a helper. Avoids duplicate extack messages in
the next patch.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:55:31 -04:00
Linus Walleij
74ee91d818 ata: sata_fsl: cut drvdata assignment
ata_host_alloc_pinfo() assigns the host pointer to the
struct device * drvdata, do not assign it a second time.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-30 11:54:37 -04:00
Linus Walleij
7c61a26891 ata: samsung_cf: cut drvdata assignment
ata_host_alloc_pinfo() assigns the host pointer to the
struct device * drvdata, do not assign it a second time.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-30 11:54:37 -04:00
Linus Walleij
0fe98fa056 ata: rb532_cf: cut drvdata assignment
ata_host_alloc_pinfo() assigns the host pointer to the
struct device * drvdata, do not assign it a second time.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-30 11:54:37 -04:00
Linus Walleij
a2136b31d3 ata: dwc_460ex: cut drvdata assignment
ata_host_alloc_pinfo() assigns the host pointer to the
struct device * drvdata, do not assign it a second time.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-30 11:54:37 -04:00
Linus Walleij
62a98c2764 ata: ep93xx: cut drvdata assignment
ata_host_alloc_pinfo() assigns the host pointer to the
struct device * drvdata, do not assign drv_data like this.
Since ata_host_alloc_pinfo() is called after this site, the
correct value is set eventually, but this assignment is just
plain pointless.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-30 11:54:36 -04:00
Linus Walleij
7ed4a21ad3 ata: bf54x: cut drvdata assignment
ata_host_alloc_pinfo() assigns the host pointer to the
struct device * drvdata, do not assign it a second time.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-05-30 11:54:36 -04:00
Matthias Kaehlcke
03ea8ad78c cfq-iosched: Delete unused function min_vdisktime()
This fixes the following warning when building with clang:

    block/cfq-iosched.c:970:19: error: unused function 'min_vdisktime'
        [-Werror,-Wunused-function]

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-30 09:49:44 -06:00
David S. Miller
f1bd4daead Merge branch 'nfp-pci-core-hwmon-live-mac-addr-change'
Jakub Kicinski says:

====================
nfp: pci core, hwmon, live mac addr change

This series brings updates to core PCI code, SR-IOV, exposes
firmware's capability to change MAC address at runtime and HWMON
interfaces.

The PCI code updates include resiliency improvement in conditions
which are quite unusual, but still shouldn't make the driver oops.
We also handle very large device memory operation more gracefully.
A timeout is added to acquiring mutexes in device memory.

Pablo provides a patch to expose to the stack the ability to change
MAC addresses under traffic while David adds HWMON interface for
reading device temperature and power consumption.

Last three patches are minor improvements to the netdev code.

v2:
 - add patch 1 - fix for devlink build;
 - fix build issue with the hwmon patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:10 -04:00
Jakub Kicinski
9ed9ea7084 nfp: don't keep count for free buffers delayed kick
We only kick RX free buffer queue controller every NFP_NET_FL_BATCH
(currently 16) entries.  This means that we will always kick the QC
when write ring index is divisable by NFP_NET_FL_BATCH.  There is
no need to keep counts.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:08 -04:00
Jakub Kicinski
770f0cea19 nfp: don't add ring size to index calculations
Adding ring size to index calculation is pointless, since index
will be masked with ring size - 1.

Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:07 -04:00
Jakub Kicinski
193d6218ba nfp: fix print format for ring pointers in ring dumps
Ring pointers are unsigned.  Fix the print formats to avoid
showing users negative values.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:06 -04:00
Jakub Kicinski
9b5655767c nfp: don't wait for resources indefinitely
There is currently no timeout to the resource and lock acquiring
loops.  We printed warnings and depended on user sending a signal
to the waiting process to stop the waiting.  This doesn't work
very well when wait happens out of a work queue.  The simplest
example of that is PCI probe.  When user loads the module and card
is in a broken state modprobe will wait forever and signals sent
to it will not actually reach the probing thread.

Make sure all wait loops have a time out.  Set the upper wait time
to 60 seconds to stay on the safe side.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:06 -04:00
David Brunecz
eefbde7e10 nfp: add hwmon support
Add support for retrieving temperature and power sensor and limits via NSP.

Signed-off-by: David Brunecz <david.brunecz@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:06 -04:00
Jakub Kicinski
a87853f383 nfp: support variable NSP response lengths
We want to support extendable commands, where newer versions
of the management FW may provide more information.  Zero out
the communication buffer before passing control to NSP.  This
way if management FW is old and only fills in first N bytes,
the remaining ones will be zeros which extended ABI fields
should reserve as not supported/not available.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:05 -04:00
Jakub Kicinski
2ed4b36d03 nfp: shorten CPP core probe logs
We currently print reserved BAR mappings info as we create them.
This makes the probe logs longer than necessary.  Print into a
buffer instead and log all the info as a single line.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:05 -04:00
Jakub Kicinski
8b3d5a47ae nfp: support long reads and writes with the cpp helpers
nfp_cpp_{read,write}() helpers perform device memory mapping (setting
the PCIe -> NOC translation BARs) and accessing it.  They, however,
currently implicitly expect that the length of entire operation will
fit in one BAR translation window.  There is a number of 16MB windows
available, and we don't really need to access such large areas today.

If the user, however, manages to trick the driver into making a big
mapping (e.g. by providing a huge fake FW file), the driver will
print a warning saying "No suitable BAR found for request" and a
stack trace - which most users find concerning.

To be future-proof and not scare users with warnings, make the
nfp_cpp_{read,write}() helpers do accesses chunk by chunk if the area
size is large.  Set the notion of "large" to 2MB, which is the size
of the smallest BAR window.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:05 -04:00
Jakub Kicinski
321b5e9afe nfp: only try to get to PCIe ctrl memory if BARs are wide enough
For accessing PCIe ctrl memory we depend on the BAR aperture being
large enough to reach all registers.  Since the BAR aperture can
be set in the flash make sure the driver won't oops the kernel
when the PCIe configuration is unusual.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:04 -04:00
Jakub Kicinski
09b857945b nfp: don't set aux pointers if ioremap failed
If ioremap of PCIe ctrl memory failed we can still get to it through
PCI config space, therefore we allow ioremap() to fail.  When if fails,
however, we must leave all the IOMEM pointers as NULL.  Currently we
would calculate csr and em pointers, adding offsets to the potential
NULL value and therefore making the NULL-checks throughout the code
ineffective.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:04 -04:00
Jakub Kicinski
651e1f2f19 nfp: set driver VF limit
PCI subsystem has support for drivers limiting the number of VFs
available below what the IOV capability claims.  Make use of it.

While at it remove the #ifdef/#endif on CONFIG_PCI_IOV, it was
there to avoid unnecessary warnings in case device read failed
but kernel doesn't have SR-IOV support anyway.  Device reads
should not fail.

Note that we still need the driver-internal check for the case
where max VFs is 0 since PCI subsystem treats 0 as limit not set.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:04 -04:00
Pablo Cascón
9d3727595b nfp: add set_mac_address support while the interface is up
Expose FW app ability to change MAC address at runtime.  Make sure
we only depend on it if FW app advertised the right capability.

Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:03 -04:00
Jakub Kicinski
d935bc84c9 nfp: add MAY_USE_DEVLINK dependency
Fix build with DEVLINK=m and NFP=y.

Fixes: 1851f93fd2 ("nfp: add devlink support")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30 11:27:03 -04:00
Gioh Kim
8eae9570d1 KVM: SVM: ignore type when setting segment registers
Commit 19bca6ab75 ("KVM: SVM: Fix cross vendor migration issue with
unusable bit") added checking type when setting unusable.
So unusable can be set if present is 0 OR type is 0.
According to the AMD processor manual, long mode ignores the type value
in segment descriptor. And type can be 0 if it is read-only data segment.
Therefore type value is not related to unusable flag.

This patch is based on linux-next v4.12.0-rc3.

Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-30 17:17:22 +02:00
Radim Krčmář
cbf712792b KVM: nVMX: fix nested_vmx_check_vmptr failure paths under debugging
kvm_skip_emulated_instruction() will return 0 if userspace is
single-stepping the guest.

kvm_skip_emulated_instruction() uses return status convention of exit
handler: 0 means "exit to userspace" and 1 means "continue vm entries".
The problem is that nested_vmx_check_vmptr() return status means
something else: 0 is ok, 1 is error.

This means we would continue executing after a failure.  Static checker
noticed it because vmptr was not initialized.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6affcbedca ("KVM: x86: Add kvm_skip_emulated_instruction and use it.")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-30 17:17:21 +02:00
Shaun McDowell
685c9b24ad nbd: add FUA op support
NBD userland client and server have FUA (forced unit access) support
and flags defined. Make NBD kernel module recognize NBD_FLAG_SEND_FUA,
enable FUA on the queue, and forward FUA requests to the server.

Signed-off-by: Shaun McDowell <shaunjmcdowell@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-30 08:20:25 -06:00
Ilya Dryomov
fa9765323a nbd: don't leak nbd_config
nbd_config is allocated in nbd_alloc_config(), but never freed.

Fixes: 5ea8d10802 ("nbd: separate out the config information")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-30 08:15:08 -06:00
Ilya Dryomov
af622b8666 nbd: nbd_reset() call in nbd_dev_add() is redundant
There is nothing to clear -- nbd_device has just been allocated.
Fold nbd_reset() into its other caller, nbd_config_put().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-30 08:15:07 -06:00
Chuanxiao Dong
ecef814c99 drm/i915/gvt: Return -EIO if host GuC submission is enabled when loading GVT-g
Currently GVT-g cannot work properly when host GuC submission is
enabled, so make the driver loading failed in this case.

v2:
- use DRM_ERROR as it is a fatal message. (Chris)

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1495878259-7733-2-git-send-email-chuanxiao.dong@intel.com
2017-05-30 16:00:07 +03:00
Chuanxiao Dong
36ccc4f89f drm/i915/gvt: Return -EIO if host enable_execlists not enabled when loading GVT-g
GVT-g relies on the enable_execlists parameter in i915. If this option
is not enabled for GVT-g, should return -EIO to make i915 driver loading
failed.

v2:
- Use DMR_ERROR as it is a fatal message. (Chris)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-05-30 15:59:56 +03:00
Chuanxiao Dong
67b7f33eee drm/i915/gvt: Add gvt options sanitize function
The intel_gvt_sanitize_options will sanitize the GVT related
options before doing initialize the GVT.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-05-30 15:59:47 +03:00
Arnd Bergmann
21e04ddff4 HID: intel_ish-hid: enable compile testing
To increase build coverage, drivers should generally be allowed to
build on other architectures even if they are only used on one
of them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30 14:11:52 +02:00
Arnd Bergmann
318fc2a867 HID: intel_ish-hid: fix format string for size_t
When building for 32-bit architectures, we get a harmless warning:

intel-ish-hid/ishtp-hid-client.c: In function 'process_recv':
intel-ish-hid/ishtp-hid-client.c:139:7: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'unsigned int' [-Werror=format=]

This changes the format string to print size_t variables using %zu
instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30 14:11:52 +02:00
Arnd Bergmann
2503f7babb HID: intel_ish-hid: convert timespec to ktime_t
The internal accounting uses 'timespec' based time stamps, which is
slightly inefficient and also problematic once we get to the time_t
overflow in 2038.

When communicating to the firmware, we even get an open-coded 64-bit
division that prevents the code from being build-tested on 32-bit
architectures and is inefficient due to the double conversion from
64-bit nanoseconds to seconds+nanoseconds and then microseconds.

This changes the code to use ktime_t instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30 14:11:52 +02:00
Arnd Bergmann
538be0aa86 HID: intel_ish-hid: clarify locking in client code
I was trying to understand this code while working on a warning
fix and the locking made no sense: spin_lock_irqsave() is pointless
when run inside of an interrupt handler or nested inside of another
spin_lock_irq() or spin_lock_irqsave().

Here it turned out that the comment above the function is wrong,
as both recv_ishtp_cl_msg_dma() and recv_ishtp_cl_msg() can in fact
be called from a work queue rather than an ISR, so we do have to
use the irqsave() version once.

This fixes the comments accordingly, removes the misleading 'dev_flags'
variable and modifies the inner spinlock to not use 'irqsave'.

No functional change is intended, this is just for readability and
it slightly simplifies the object code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30 14:11:52 +02:00
Arnd Bergmann
1260662fa3 HID: intel_ish-hid: fix potential uninitialized data usage
gcc points out an uninialized pointer dereference that could happen
if we ever get to recv_ishtp_cl_msg_dma() or recv_ishtp_cl_msg()
with an empty &dev->read_list:

drivers/hid/intel-ish-hid/ishtp/client.c: In function 'recv_ishtp_cl_msg_dma':
drivers/hid/intel-ish-hid/ishtp/client.c:1049:3: error: 'cl' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The warning only appeared in very few randconfig builds, as the
spinlocks tend to prevent gcc from tracing the variables. I only
saw it in configurations that had neither SMP nor LOCKDEP enabled.

As we can see, we only enter the case if 'complete_rb' is non-NULL,
and then 'cl' is known to point to complete_rb->cl. Adding another
initialization to the same pointer is harmless here and makes it
clear to the compiler that the behavior is well-defined.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-30 14:11:52 +02:00
Wei Huang
477c50e8dc drivers/perf: arm_pmu_acpi: avoid perf IRQ init when guest PMU is off
We saw perf IRQ init failures when running Linux kernel in an ACPI
guest without PMU (i.e. pmu=off). This is because perf IRQ is not
present when pmu=off, but arm_pmu_acpi still tries to register
or unregister GSI. This patch addresses the problem by checking
gicc->performance_interrupt. If it is 0, which is the value set
by qemu when pmu=off, we skip the IRQ register/unregister process.

[    4.069470] bc00: 0000000000040b00 ffff0000089db190
[    4.070267] [<ffff000008134f80>] enable_percpu_irq+0xdc/0xe4
[    4.071192] [<ffff000008667cc4>] arm_perf_starting_cpu+0x108/0x10c
[    4.072200] [<ffff0000080cbdd4>] cpuhp_invoke_callback+0x14c/0x4ac
[    4.073210] [<ffff0000080ccd3c>] cpuhp_thread_fun+0xd4/0x11c
[    4.074132] [<ffff0000080f1394>] smpboot_thread_fn+0x1b4/0x1c4
[    4.075081] [<ffff0000080ec90c>] kthread+0x10c/0x138
[    4.075921] [<ffff0000080833c0>] ret_from_fork+0x10/0x50
[    4.076947] genirq: Setting trigger mode 4 for irq 43 failed
(gic_set_type+0x0/0x74)

Signed-off-by: Wei Huang <wei@redhat.com>
[will: add comment justifying deviation from ACPI spec, removed redundant hunk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-30 12:40:03 +01:00
Shaokun Zhang
fe7296e192 arm64: perf: Extend event config for ARMv8.1
Perf has supported ARMv8.1 feature with 16-bit evtCount filed [see c210ae8
arm64: perf: Extend event mask for ARMv8.1], event config should be
extended to 16-bit too, otherwise, if use -e event_name whose event_code
is more than 0x3ff, pmu_config_term will return -EINVAL because function
pmu_format_max_value depends on event config.

This patch extends event config to 16-bit.

Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-05-30 12:15:14 +01:00
Sekhar Nori
f434b1c4ab MAINTAINERS: add device-tree files to TI DaVinci entry
Add device-tree files relevant to TI DaVinci platform
to its entry so mach-davinci sub-arch maintainers get
copied on patches with device-tree file updates.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-05-30 16:29:57 +05:30
Russell King
1515b186c2 ARM: make configuration of userspace Thumb support an expert option
David Mosberger reports random segfaults and other problems when running
his buildroot userspace.  It turns out that his kernel did not have
support for Thumb userspace, nor did his application, but glibc made use
of Thumb instructions in glibc.

The kernel Thumb support option already recommends being enabled, and
is also so biased, but clearly this is not enough of a recommendation.

So, hide this behind CONFIG_EXPERT as well, and include a note to
indicate the potential issues if it's turned off and userspace Thumb
mode is made use of.

Reported-by: David Mosberger <davidm@egauge.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-05-30 11:56:14 +01:00