Commit graph

708,694 commits

Author SHA1 Message Date
Eric Biggers
9df0eb180c crypto: xts,lrw - fix out-of-bounds write after kmalloc failure
In the generic XTS and LRW algorithms, for input data > 128 bytes, a
temporary buffer is allocated to hold the values to be XOR'ed with the
data before and after encryption or decryption.  If the allocation
fails, the fixed-size buffer embedded in the request buffer is meant to
be used as a fallback --- resulting in more calls to the ECB algorithm,
but still producing the correct result.  However, we weren't correctly
limiting subreq->cryptlen in this case, resulting in pre_crypt()
overrunning the embedded buffer.  Fix this by setting subreq->cryptlen
correctly.

Fixes: f1c131b454 ("crypto: xts - Convert to skcipher")
Fixes: 700cb3f5fe ("crypto: lrw - Convert to skcipher")
Cc: stable@vger.kernel.org # v4.10+
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24 21:51:34 +08:00
Gary R Hook
efc989fce8 crypto: ccp - Make some CCP DMA channels private
The CCP registers its queues as channels capable of handling
general DMA operations. The NTB driver will use DMA if
directed, but as public channels can be reserved for use in
asynchronous operations some channels should be held back
as private. Since the public/private determination is
handled at a device level, reserve the "other" (secondary)
CCP channels as private.

Add a module parameter that allows for override, to be
applied to all channels on all devices.

CC: <stable@vger.kernel.org> # 4.10.x-
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24 21:51:34 +08:00
Jason A. Donenfeld
de5540d088 padata: avoid race in reordering
Under extremely heavy uses of padata, crashes occur, and with list
debugging turned on, this happens instead:

[87487.298728] WARNING: CPU: 1 PID: 882 at lib/list_debug.c:33
__list_add+0xae/0x130
[87487.301868] list_add corruption. prev->next should be next
(ffffb17abfc043d0), but was ffff8dba70872c80. (prev=ffff8dba70872b00).
[87487.339011]  [<ffffffff9a53d075>] dump_stack+0x68/0xa3
[87487.342198]  [<ffffffff99e119a1>] ? console_unlock+0x281/0x6d0
[87487.345364]  [<ffffffff99d6b91f>] __warn+0xff/0x140
[87487.348513]  [<ffffffff99d6b9aa>] warn_slowpath_fmt+0x4a/0x50
[87487.351659]  [<ffffffff9a58b5de>] __list_add+0xae/0x130
[87487.354772]  [<ffffffff9add5094>] ? _raw_spin_lock+0x64/0x70
[87487.357915]  [<ffffffff99eefd66>] padata_reorder+0x1e6/0x420
[87487.361084]  [<ffffffff99ef0055>] padata_do_serial+0xa5/0x120

padata_reorder calls list_add_tail with the list to which its adding
locked, which seems correct:

spin_lock(&squeue->serial.lock);
list_add_tail(&padata->list, &squeue->serial.list);
spin_unlock(&squeue->serial.lock);

This therefore leaves only place where such inconsistency could occur:
if padata->list is added at the same time on two different threads.
This pdata pointer comes from the function call to
padata_get_next(pd), which has in it the following block:

next_queue = per_cpu_ptr(pd->pqueue, cpu);
padata = NULL;
reorder = &next_queue->reorder;
if (!list_empty(&reorder->list)) {
       padata = list_entry(reorder->list.next,
                           struct padata_priv, list);
       spin_lock(&reorder->lock);
       list_del_init(&padata->list);
       atomic_dec(&pd->reorder_objects);
       spin_unlock(&reorder->lock);

       pd->processed++;

       goto out;
}
out:
return padata;

I strongly suspect that the problem here is that two threads can race
on reorder list. Even though the deletion is locked, call to
list_entry is not locked, which means it's feasible that two threads
pick up the same padata object and subsequently call list_add_tail on
them at the same time. The fix is thus be hoist that lock outside of
that block.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24 21:51:33 +08:00
Thomas Petazzoni
74d1cf4897 dt-bindings: rng: clocks property on omap_rng not always mandatory
Commit 52060836f7 ("dt-bindings: omap-rng: Document SafeXcel IP-76
device variant") update the omap_rng Device Tree binding to add support
for the IP-76 variation of the IP. As part of this change, a "clocks"
property was added, but is indicated as "Required", without indicated
it's actually only required for some compatible strings.

This commit fixes that, by explicitly stating that the clocks property
is only required with the inside-secure,safexcel-eip76 compatible
string.

Fixes: 52060836f7 ("dt-bindings: omap-rng: Document SafeXcel IP-76 device variant")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24 21:51:32 +08:00
Arnd Bergmann
f3e4559781 x86/syscalls/32: Ignore arch_prctl for other architectures
sys_arch_prctl is only provided on x86, and there is no reason
to add it elsewhere. However, including it on the 32-bit syscall
table caused a warning for most configurations on non-x86:

:1328:2: warning: #warning syscall arch_prctl not implemented [-Wcpp]

This adds an exception to the syscall table checking script.

Fixes: 79170fda31 ("x86/syscalls/32: Wire up arch_prctl on x86-32")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kyle Huey <khuey@kylehuey.com>
Link: http://lkml.kernel.org/r/20170323151904.706286-1-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-24 14:13:55 +01:00
Russell King
0e3cb6ee38 gpio: gpio-reg: add irq mapping for gpio-reg users
Add support for mapping gpio-reg gpios to interrupts.  This may be a
non-linear mapping - some gpios in the register may not even have
corresponding interrupts associated with them, so we need to pass an
array.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24 14:05:00 +01:00
Russell King
380639c7cc gpio: add generic single-register fixed-direction GPIO driver
Add a simple, generic, single register fixed-direction GPIO driver.
This is able to support a single register with a mixture of inputs
and outputs.

This is different from gpio-mmio and gpio-74xx-mmio:
* gpio-mmio doesn't allow a fixed direction, it assumes there is always
  a direction register.
* gpio-74xx-mmio only supports all-in or all-out setups
* gpio-74xx-mmio is DT only, this needs to support legacy too
* they don't double-read when getting the GPIO value, as required by
  some implementations that this driver supports
* we need to always do 32-bit reads, which bgpio doesn't guarantee
* the current output state may not be readable from the hardware
  register - reading may reflect input status but not output status.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24 14:04:46 +01:00
Russell King
c65d1fd350 gpio: sa1100: implement get_direction method
Allow gpiolib to read back the current IO direction configuration by
implementing the .get_direction callback.  This, in part, allows
debugfs to report the complete true hardware state rather than the
software state.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24 14:04:37 +01:00
Russell King
07242b2481 gpio: sa1100: convert to use IO accessors
Use IO accessors to access the SA1100 registers rather than accessing
them directly.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24 14:04:26 +01:00
Russell King
9dd4819ed5 gpio: sa1100: use sa11x0_gpio_set_wake()
Use sa11x0_gpio_set_wake() to set the PWER register, as provided by
Dmitry some time back.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24 14:04:13 +01:00
Philipp Zabel
c3d4fb0fb4 [media] rc: sunxi-cir: simplify optional reset handling
As of commit bb475230b8 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.

This allows to return errors from devm_reset_control_get_optional and to
call reset_control_(de)assert unconditionally.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:30:03 -03:00
Philipp Zabel
ec6b0bd54e [media] st_rc: simplify optional reset handling
As of commit bb475230b8 ("reset: make optional functions really
optional"), the reset framework API calls use NULL pointers to describe
optional, non-present reset controls.

This allows to return errors from reset_control_get_optional and to call
reset_control_(de)assert unconditionally.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:29:27 -03:00
Johan Hovold
03eb2a557e [media] mceusb: fix NULL-deref at probe
Make sure to check for the required out endpoint to avoid dereferencing
a NULL-pointer in mce_request_packet should a malicious device lack such
an endpoint. Note that this path is hit during probe.

Fixes: 66e89522af ("V4L/DVB: IR: add mceusb IR receiver driver")

Cc: stable <stable@vger.kernel.org>	# 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:28:25 -03:00
Sean Young
74c839b2f5 [media] lirc: use refcounting for lirc devices
If a lirc device is unplugged, the struct rc_dev is freed even though
userspace can still have a file descriptor open on the lirc chardev. The
rc_dev structure can be used in a subsequent, or even currently executing
ioctl, read or write.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:27:07 -03:00
Sean Young
069f3b10ae [media] serial_ir: iommap is a memory address, not bool
This has been broken for a long time, so presumably it is not used. I
have no hardware to test this on.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=61401

Fixes: 90ab5ee ("module_param: make bool parameters really bool")

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:25:46 -03:00
Sean Young
b73bc16d08 [media] mce_kbd: add encoder
Split the protocol into two variants, one for keyboard and one for mouse
data.

Note that the mce_kbd protocol cannot be used on the igorplugusb, since
the IR is too long.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:24:41 -03:00
Sean Young
e8f4818895 [media] lirc: advertise LIRC_CAN_GET_REC_RESOLUTION and improve
This feature was never set. The ioctl should fail if no resolution
is set.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:23:18 -03:00
Sean Young
7dc2df1476 [media] rc: lirc keymap no longer makes any sense
The lirc keymap existed once upon a time to select the lirc protocol.
Since '275ddb4 [media] rc-core: remove the LIRC "protocol"', IR is
always passed to the lirc decoder so this keymap is no longer needed.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:22:36 -03:00
Mike Looijmans
dbe4d69d25 i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
The spec for the pca9546 was missing. This chip is the same as the pca9545
except that it lacks interrupt lines. While the i2c_device_id table mapped
the pca9546 to the pca9545 definition the compatible table did not.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Peter Rosin <peda@axentia.se>
2017-03-24 12:22:18 +01:00
Sean Young
ee5310e66e [media] gpio-ir: do not allow a timeout of 0
According to the documentation, a timeout of 0 turns off timeouts,
which is not the case.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:21:48 -03:00
Sean Young
ea80fb6d08 [media] winbond: allow timeout to be set
The drivers sets the hardware to idle when a timeout occurs. This can
be any reasonable value.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:21:17 -03:00
Sean Young
bc989391ab [media] lirc: return ENOTTY when device does support ioctl
If timeouts or carrier range is not supported, return proper error.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 08:20:28 -03:00
Marek Szyprowski
d5bf739dc7 iommu/exynos: Use smarter TLB flush method for v5 SYSMMU
SYSMMU v5 has dedicated registers to perform TLB flush range operation,
so use them instead of looping with FLUSH_ENTRY command.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-24 12:11:43 +01:00
Marek Szyprowski
e75276638c iommu/exynos: Don't open-code loop unrolling
IOMMU domain allocation is not performance critical operation, so remove
hand made optimisation of unrolled initialization loop and leave this to
the compiler.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-24 12:11:43 +01:00
Arnd Bergmann
13f99ebdd6 ALSA: au88x0: avoid theoretical uninitialized access
The latest gcc-7.0.1 snapshot points out that we if nr_ch is zero, we never
initialize some variables:

sound/pci/au88x0/au88x0_core.c: In function 'vortex_adb_allocroute':
sound/pci/au88x0/au88x0_core.c:2304:68: error: 'mix[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
sound/pci/au88x0/au88x0_core.c:2305:58: error: 'src[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I assume this can never happen in practice, but adding a check here doesn't
hurt either and avoids the warning. The code has been unchanged since
the start of git history.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-24 11:59:51 +01:00
Alexandre TORGUE
500cdb23d6 ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board
Add basic support for STM32H743 MCU and his eval board.
The STMicrolectornics's STM32H743 MCU is based on  Cortex-M7 core
running up to @400MHz with 2MB internal flash and 1MB internal RAM.

For more details see:
Documentation/arm/stm32/stm32h743-overview.txt

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-24 11:59:29 +01:00
Sean Young
5c86275869 [media] lirc: return ENOTTY when ioctl is not supported
We shouldn't be using ENOSYS when a feature is not available. I've tested
lirc; nothing is broken as far as I can make out.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 07:44:42 -03:00
Sean Young
a8b875a549 [media] lirc: document lirc modes better
LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE were not covered at all.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 07:43:26 -03:00
Derek Robson
5cd6522c5b [media] staging: lirc: use octal instead of symbolic permission
Changed permissions to octal across whole driver
Found by checkpatch

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 07:41:52 -03:00
Sean Young
207c957d9e [media] cxusb: dvico remotes are nec
Adjust the keymap to use the correct nec scancodes, and adjust the
rc driver to output the correct nec scancodes.

Now the keymap can be used with any nec receiver, and the rc device
should work with any nec keymap.

Tested-by: Vincent McIntyre <vincent.mcintyre@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-24 07:41:17 -03:00
Alexandre TORGUE
c6ed0f31ce ARM: stm32: Add a new SOC - STM32H743
The STM32H743 is a Cortex-M7 MCU running at 400MHz and containing 1MBytes
internal RAM.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-24 11:37:24 +01:00
Steven Rostedt (VMware)
1fa9d67a2f x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o
Currently ftrace_32.S and ftrace_64.S are compiled even when
CONFIG_FUNCTION_TRACER is not set. This means there's an unnecessary #ifdef
to protect the code. Instead of using preprocessor directives, only compile
those files when FUNCTION_TRACER is defined.

Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170316210043.peycxdxktwwn6cid@treble
Link: http://lkml.kernel.org/r/20170323143446.217684991@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-24 10:14:08 +01:00
Steven Rostedt (VMware)
644e0e8dc7 x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set
x86_64 has had fentry support for some time. I did not add support to x86_32
as I was unsure if it will be used much in the future. It is still very much
used, and there's issues with function graph tracing with gcc playing around
with the mcount frames, causing function graph to panic. The fentry code
does not have this issue, and is able to cope as there is no frame to mess
up.

Note, this only adds support for fentry when DYNAMIC_FTRACE is set. There's
really no reason to not have that set, because the performance of the
machine drops significantly when it's not enabled.

Keep !DYNAMIC_FTRACE around to test it off, as there's still some archs
that have FTRACE but not DYNAMIC_FTRACE.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170323143446.052202377@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-24 10:14:07 +01:00
Steven Rostedt (VMware)
ff04b440d2 x86/ftrace: Clean up ftrace_regs_caller
When ftrace_regs_caller was created, it was designed to preserve flags as
much as possible as it needed to act just like a breakpoint triggered on the
same location. But the design is over complicated as it treated all
operations as modifying flags. But push, mov and lea do not modify flags.
This means the code can become more simplified by allowing flags to be
stored further down.

Making ftrace_regs_caller simpler will also be useful in implementing fentry
logic.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170316135328.36123c3e@gandalf.local.home
Link: http://lkml.kernel.org/r/20170323143445.917292592@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-24 10:14:07 +01:00
Steven Rostedt (VMware)
e6928e58d4 x86/ftrace: Add stack frame pointer to ftrace_caller
The function hook ftrace_caller does not create its own stack frame, and
this causes the ftrace stack trace to miss the first function when doing
stack traces.

 # echo schedule:stacktrace > /sys/kernel/tracing/set_ftrace_filter

Before:
         <idle>-0     [002] .N..    29.865807: <stack trace>
 => cpu_startup_entry
 => start_secondary
 => startup_32_smp
           <...>-7     [001] ....    29.866509: <stack trace>
 => kthread
 => ret_from_fork
           <...>-1     [000] ....    29.865377: <stack trace>
 => poll_schedule_timeout
 => do_select
 => core_sys_select
 => SyS_select
 => do_fast_syscall_32
 => entry_SYSENTER_32

After:
          <idle>-0     [002] .N..    31.234853: <stack trace>
 => do_idle
 => cpu_startup_entry
 => start_secondary
 => startup_32_smp
           <...>-7     [003] ....    31.235140: <stack trace>
 => rcu_gp_kthread
 => kthread
 => ret_from_fork
           <...>-1819  [000] ....    31.264172: <stack trace>
 => schedule_hrtimeout_range
 => poll_schedule_timeout
 => do_sys_poll
 => SyS_ppoll
 => do_fast_syscall_32
 => entry_SYSENTER_32

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170323143445.771707773@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-24 10:14:07 +01:00
Steven Rostedt (VMware)
3d82c59c6e x86/ftrace: Move the ftrace specific code out of entry_32.S
The function tracing hook code for ftrace is not an entry point from
userspace and does not belong in the entry_*.S files. It has already been
moved out of entry_64.S.

Move it out of entry_32.S into its own ftrace_32.S file.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170323143445.645218946@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-24 10:14:07 +01:00
Steven Rostedt (VMware)
db65d7b6dc x86/ftrace: Rename mcount_64.S to ftrace_64.S
With the advent of -mfentry that uses the new "fentry" hook over mcount,
the mcount name is obsolete. Having the code file that ftrace hooks into
called "mcount*.S" is rather misleading. Rename it to ftrace_64.S and
remove the file name reference.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20170323143445.490601451@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-24 10:14:06 +01:00
Masahiro Yamada
c5d664aa5a mtd: nand: do not check R/B# for CMD_SET_FEATURES in nand_command(_lp)
Set Features (0xEF) command toggles the R/B# pin after 4 sub feature
parameters are written.

Currently, nand_command(_lp) calls chip->dev_ready immediately after
the address cycle because NAND_CMD_SET_FEATURES falls into default:
label.  No wait is needed at this point.

If you see nand_onfi_set_features(), R/B# is already cared by the
chip->waitfunc call.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 10:07:40 +01:00
Masahiro Yamada
3158fa0e73 mtd: nand: do not check R/B# for CMD_READID in nand_command(_lp)
Read ID (0x90) command does not toggle the R/B# pin.  Without this
patch, NAND_CMD_READID falls into the default: label, then R/B# is
checked by chip->dev_ready().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 10:07:38 +01:00
Masahiro Yamada
e30b46909b mtd: nand: denali: use int where no reason to use fixed width variable
The page number is generally stored in an integer type variable.
The uint16_t does not have enough width.  I see no reason to use
uint32_t for other members, either.  Just use int.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:51:41 +01:00
Masahiro Yamada
be72a4aa8e mtd: nand: denali: introduce capability flag
The Denali NAND controller IP has various customizable features.
SoC vendors can choose desired functions when a delivery RTL is
created.  It means there are several variants for this IP.  For
example, the Intel version is equipped with 32bit DMA, whereas the
IP for UniPhier SoC family with 64bit DMA.

This driver was originally written for some Intel platforms with
Intel specific things hard-coded.  What is worse, the revision
register of this IP does not work to distinguish such features.
We need to do something to make the driver available for other SoCs.

Let's introduce a caps member to the denali_nand_info structure to
switch on/off various features.  Also, add struct denali_dt_data to
store the capability associated with compatible string.

Boris suggested this approach in discussion [1] instead of a new DT
property for every feature.

[1] https://lkml.org/lkml/2016/3/29/142

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:51:38 +01:00
Masahiro Yamada
1aded58a27 mtd: nand: denali: consolidate INTR_STATUS__* and INTR_EN__* macros
The interrupts are enabled by INTR_EN register, then asserted
interrupts can be observed via INTR_STATUS register.

The bit fields are identical between INTR_EN and INTR_STATUS, so we
can merge the bit field macros.  Likewise for DATA_INTR.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:51:36 +01:00
Masahiro Yamada
60ca41f1d9 mtd: nand: denali: fix comment of denali_nand_info::flash_mem
The same comment "Mapped io reg base address" for flash_reg and
flash_mem probably due to the mistake of copy-paste work.
Of course, the latter is not the register base address.

Reword the comments using the terminology in the Denali User's Guide.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:51:34 +01:00
Masahiro Yamada
264a7cabb8 mtd: nand: denali: remove more unused struct members
These members are not used at all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:51:32 +01:00
Masahiro Yamada
6b2fc9d495 mtd: nand: denali: remove redundant define of BANK(x)
This macro is defined twice in denali.c (around line 98 and
line 651), so remove the second one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:51:30 +01:00
Masahiro Yamada
357cc408a4 mtd: nand: denali: remove unused CONFIG option and macros
All of these macros are not used at all.
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR is not used for anything but
defining SCRATCH_REG_ADDR.  The config option should go away as well.

I am removing some register macros.  They are not used, and do not
exist in recent IP versions.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:51:28 +01:00
Masahiro Yamada
c120e75e0e mtd: nand: use read_oob() instead of cmdfunc() for bad block check
The nand_default_block_markbad() and scan_block_fast() use high
level APIs to get access to the BBM.

On the other hand, nand_block_bad (the default implementation of
->block_bad) calls the lower level ->cmdfunc hook.  This prevents
drivers from using ->ecc.read_oob() even if optimized read operation
is implemented.  Besides, some NAND controllers may protect the BBM
with ECC.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-03-24 09:47:43 +01:00
Daniel Vetter
0cad7f71b5 drm/debugfs: Add kerneldoc
I've decided to not document drm_debugfs_remove_files, it's on the way
out.

The biggest part is a huge todo.rst entry with what all should be
improved.

v2: Nits from Gabriel.

Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205401.24897-1-daniel.vetter@ffwll.ch
2017-03-24 09:36:06 +01:00
Daniel Vetter
760f71e72e drm: document driver interface for CRC capturing
This was missed in Tomeu's patch. Also remove the kerneldoc for the
internal function, we don't document that in general.

While at it word-smith the docs slightly for more clarity.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-4-daniel.vetter@ffwll.ch
2017-03-24 09:36:06 +01:00
Daniel Vetter
4834442d70 drm: Extract drm_debugfs.h
Doc polish will follow in the next patch.

v2: Put the include guard #endif at the end (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205336.24549-1-daniel.vetter@ffwll.ch
2017-03-24 09:36:06 +01:00