In the functions intel_pstate_hwp_set(), min/max range from HWP capability
MSR along with max_perf_pct and min_perf_pct, is used to set the HWP
request MSR. In some cases this doesn't result in the correct HWP max/min
in HWP request.
For example: In the following case:
HWP capabilities from MSR 0x771
0x70a1220
Here cpufreq min/max frequencies from above MSR dump are 700MHz and 3.2GHz
respectively.
This will result in
hwp_min = 0x07
hwp_max = 0x20
To limit max frequency to 2GHz:
perf_limits->max_perf_pct = 63 (2GHz as a percent of 3.2GHz rounded up)
With the current calculation:
adj_range = max_perf_pct * range / 100;
adj_range = 63 * (32 - 7) / 100
adj_range = 15
max = hw_min + adj_range;
max = 7 + 15 = 22
This will result in HWP request of 0x160f, which will result in a
frequency cap of 2.2GHz not 2GHz.
The problem with the above calculation is that hwp_min of 7 is treated
as 0% in the range. But max_perf_pct is calculated with respect to minimum
as 0 and max as 3.2GHz or hwp_max, so adding hwp_min to it will result in
more than the desired.
Since the min_perf_pct and max_perf_pct is already a percent of max
frequency or hwp_max, this min/max HWP request value can be calculated
directly applying these percentage to hwp_max.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For Qualcomm Technologies QDF2400 SOCs that are affected by erratum E44,
the ACPI oem_revision field is actually set to 1, not 0.
Fixes: d8a4995bce ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Tested-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main item is the addition of the Power9 Machine Check handler. This was
delayed to make sure some details were correct, and is as minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with obscure
toolchain problems, two for the PowerNV IOMMU code (used by VFIO), and one to
fix a crash on 32-bit machines with macio devices due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan, Nicholas
Piggin.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=390M
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull some more powerpc fixes from Michael Ellerman:
"The main item is the addition of the Power9 Machine Check handler.
This was delayed to make sure some details were correct, and is as
minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with
obscure toolchain problems, two for the PowerNV IOMMU code (used by
VFIO), and one to fix a crash on 32-bit machines with macio devices
due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
Nicholas Piggin"
* tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: POWER9 machine check handler
powerpc/64s: allow machine check handler to set severity and initiator
powerpc/64s: fix handling of non-synchronous machine checks
powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
powerpc/powernv/ioda2: Update iommu table base on ownership change
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
powerpc/perf: Handle sdar_mode for marked event in power9
powerpc/perf: Fix perf_get_data_addr() for power9 DD1
powerpc/boot: Fix zImage TOC alignment
Commit 6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be
used") recently broke the 8250_dw driver on platforms which don't select
HAVE_CLK, as dw8250_set_termios() gets confused by the behaviour of the
fallback HAVE_CLK=n clock API in linux/clk.h which pretends everything
is fine but returns (valid) NULL clocks and 0 HZ clock rates.
That 0 rate is written into the uartclk resulting in a crash at boot,
e.g. on Cavium Octeon III based UTM-8 we get something like this:
1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 25000000) is a OCTEON
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at drivers/tty/serial/serial_core.c:441 uart_get_baud_rate+0xfc/0x1f0
...
Call Trace:
...
[<ffffffff8149c2e4>] uart_get_baud_rate+0xfc/0x1f0
[<ffffffff814a5098>] serial8250_do_set_termios+0xb0/0x440
[<ffffffff8149c710>] uart_set_options+0xe8/0x190
[<ffffffff814a6cdc>] serial8250_console_setup+0x84/0x158
[<ffffffff814a11ec>] univ8250_console_setup+0x54/0x70
[<ffffffff811901a0>] register_console+0x1c8/0x418
[<ffffffff8149f004>] uart_add_one_port+0x434/0x4b0
[<ffffffff814a1af8>] serial8250_register_8250_port+0x2d8/0x440
[<ffffffff814aa620>] dw8250_probe+0x388/0x5e8
...
The clock API is defined such that NULL is a valid clock handle so it
wouldn't be right to check explicitly for NULL. Instead treat a
clk_round_rate() return value of 0 as an error which prevents uartclk
being overwritten.
Fixes: 6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be used")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-serial@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: bcm-kernel-feedback-list@broadcom.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jason Uy <jason.uy@broadcom.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk_round_rate returns a signed long and may possibly return errors
in it, for example if there is no possible rate.
Till now dw8250_set_termios ignored any error, the signednes and would
just use the value as input to clk_set_rate. This of course falls apart
if there is an actual error, so check for errors and only try to set
a rate if the value is actually valid.
This turned up on some Rockchip platforms after commit
6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be used")
enabled set_termios callback in all cases, not only ACPI.
Fixes: 6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be used")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check to see if cd is null is redundant, pdata->channels is
never null at this point, and hence &pdata->channels[i] cannot
be null, so remove the null check.
Detected by CoverityScan, CID#1357194 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
[resend due to me forgetting to cc: linux-api the first time around I
posted these back on Feb 23]
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason these values are not in the uapi header file, so any
libc has to define it themselves. To prevent them from needing to do
this, just have the kernel provide the correct values.
Reported-by: Elliott Hughes <enh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[resend due to me forgetting to cc: linux-api the first time around I
posted these back on Feb 23]
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When userspace tries to use these defines, it complains that it needs to
be an unsigned 1 that is shifted, so libc implementations have to create
their own version. Fix this by defining it properly so that libcs can
just use the kernel uapi header.
Reported-by: Elliott Hughes <enh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code may be refactored to take advantage of previous patches which
reduced the level of indentation. Function parameter line breaks can
be adjusted in line with kernel coding standards.
Refactor layout of function call parameters. Make whitespace changes
only.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits WARNING: Too many leading tabs - consider code
refactoring. One level of indentation may be removed by inverting an
if statement conditional (and returning if new conditional evaluates
to true). Code contains switch statement that also contains multiple
layers of indentation. Indentation may be reduced by breaking out of
the case statement in multiple places instead of guarding code with
if/else statements.
Invert conditional. Return original error code if new conditional
evaluates to true. Break out of case blocks instead of using
if/else. Do not modify program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits WARNING: single byte memset is suspicious. Swapped
2nd/3rd argument? Call site in question is correct but is an unusual
use of memset() to zero a single byte. The same can be achieved by
assigning 0 directly to the memory location.
Dereference pointer and assign 0 to that memory location. Use '\0' to
make explicit that it is a char pointer.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return value from kmalloc() does not require a cast.
Remove unnecessary cast.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits WARNING: else is not generally useful after a break
or return. Two warnings of this type are emitted, both are the result
of a else statement after a return statement. The 'else' can safely be
removed.
Remove unnecessary else statement.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits WARNING: Comparisons should place the constant on the
right side of the test.
Move constant to right hand side of test, modify operator to ensure
logic is maintained.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits CHECK: multiple assignments should be avoided.
Move multiple assignment onto separate lines. Fix comment to use more
natural English.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits CHECK: Alignment should match open parenthesis. This
is due to commented out code.
Remove commented out (dead) code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits CHECK: Logical continuations should be on the
previous line.
Move logical continuation to previous line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits over 100 instances of CHECK: No space is necessary
after a cast.
Remove unnecessary space.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver mixes spelling michael and michel in symbol names and
comments. Michael here references the IEEE 802.11i Message Integrity
Code. It is incorrect to spell it michel and confusing having two
spellings for the same thing.
Change michel -> micheal in both symbol names and comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commenting out code is a bad idea.
As comments are for explaining what code is about.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I believe there is a missing break in the switch statement for
case V4L2_CID_FOCUS_STATUS as the current fall-through looks
suspect to me.
Detected by CoverityScan, CID#1416580 ("Missing break in switch")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to perform a null check on frame as there is an earlier
null check check and return hence making the null check redundant.
Remove it.
Detected by CoverityScan, CID#1416563 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
md_type is an enum. On my tests, GCC treats it as unsigned but
according to the C standard it's an implementation dependant thing so we
should check for negatives.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function atomisp_set_stop_timeout on being called, simply returns
back. The function hasn't been mentioned in the TODO and doesn't have
FIXME code around. Hence, atomisp_set_stop_timeout and its calls have been
removed.
This was done using Coccinelle.
@@
identifier f;
@@
void f(...) {
-return;
}
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove gc2235_init() function definition and call, as it is used only
once in gc2235.c file. Replace the function call with return value,
__gc2235_init() function call.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify function return by merging assignment and return into a single
line. The following coccinelle script is used to fix this issue.
@@
expression e;
local idexpression ret;
@@
-ret = e;
-return ret;
+return e;
This patch also removes unnecessary declarations.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bool initializations should use true and false instead of 1 and 0.
Detected by coccinelle/misc/boolinit.cocci.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In bcm2835_audio_open_connection(), if VCHI connection fails or
initialisation of VCHI audio instance fails vchi_instance needs to be
deallocated otherwise it will cause a memory leak.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch de-allocates work when queue_work(..) fails in the
bcm2835-audio work functions
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Refactor conditional to check if memory allocation has failed and
immediately return (-ENOMEM); if block for success case is removed.
* Return the error value -EBUSY when queue_work() fails.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is better to propagate PTR_ERR value instead of a hardcoded value
(-EPERM here)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces NULL values returned by vc_vchi_audio_init(...) with
error pointer values:
- Return ERR_PTR(-EINVAL) when too many instances of audio
service are initialised
- Return ERR_PTR(-ENOMEM) when kzalloc fails
- RETURN ERR_PTR(-EPERM) when vchi connections fail to open
Similarly, a NULL check where vc_vchi_audio_init(...) is called is
replaced by IS_ERR(..)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the warnings reported by checkpatch.pl
for please use a blank line after function/struct/union/enum
declarations.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function prototype arguments like 'struct vb_device_info *','unsigned
long' etc. should have an identifier name.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UAPI header split failed to update the documentation here; fix things
accordingly.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The UAPI header split failed to update the documentation here; fix things
accordingly.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The UAPI header split failed to update the documentation in
input-programming.txt; fix things accordingly.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The UAPI header split failed to update the documentation here; fix things
accordingly.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since commit f9b6b0ef60 ("selftests: move vDSO tests from Documentation/vDSO")
parse_vdso.c moved under selftests. Update the reference to match.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The user/admin documentation of cpufreq is badly outdated. It
conains stale and/or inaccurate information along with things
that are not particularly useful. Also, some of the important
pieces are missing from it.
For this reason, add a new user/admin document for cpufreq
containing current information to admin-guide and drop the old
outdated .txt documents it is replacing.
Since there will be more PM documents in admin-guide going forward,
create a separate directory for them and put the cpufreq document
in there right away.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Bindings for the platform.
- Device trees for everything that was available as board
files previously.
- New device tree for my target system SQ201.
- Device tree bindings for the watchdog. The driver was merged
to the watchdog subsystem so this was probably just missed
by the maintainer, and it is ACKed by Rob Herring.
-----BEGIN PGP SIGNATURE-----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=MVt+
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-base' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Base patches for Gemini device trees:
- Bindings for the platform.
- Device trees for everything that was available as board
files previously.
- New device tree for my target system SQ201.
- Device tree bindings for the watchdog. The driver was merged
to the watchdog subsystem so this was probably just missed
by the maintainer, and it is ACKed by Rob Herring.
* tag 'gemini-dts-base' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add watchdog to the Gemini
watchdog: add DT bindings for Cortina Gemini
ARM: dts: add a devicetree for Wiliboard WBD-222
ARM: dts: add a devicetree for Wiliboard WBD-111
ARM: dts: add a devicetree for Teltonika RUT1xx
ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B
ARM: dts: add device tree for Gemini SoC and SQ201
ARM: dts: add top-level DT bindings for Cortina Gemini
Signed-off-by: Olof Johansson <olof@lixom.net>
- Converts the Gemini platform to device tree.
- Deletes all the board files.
- Fixes the prerequisities for a multiplatform boot and
switches to multiplatform.
-----BEGIN PGP SIGNATURE-----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=3cDe
-----END PGP SIGNATURE-----
Merge tag 'gemini-multiplat-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/soc
This patchset:
- Converts the Gemini platform to device tree.
- Deletes all the board files.
- Fixes the prerequisities for a multiplatform boot and
switches to multiplatform.
* tag 'gemini-multiplat-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: gemini: convert to ARMv4 multiplatform
ARM: gemini: select ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR
ARM: gemini: switch to sparse IRQs
ARM: gemini: delete all boardfiles
ARM: gemini: DT for the Cortina Gemini SoC platforms
ARM: gemini: convert to MULTI_IRQ_HANDLER
Signed-off-by: Olof Johansson <olof@lixom.net>
The required changes in the function vxlan_dev_create() were missing
in commit 8bcdc4f3a2.
The vxlan device is not registered anymore after this patch and the error
path causes an stack dump:
WARNING: CPU: 3 PID: 1498 at net/core/dev.c:6713 rollback_registered_many+0x9d/0x3f0
Fixes: 8bcdc4f3a2 ("vxlan: add changelink support")
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Enable SH Mobile I2C controller
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aVur
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64
Renesas ARM64 Based SoC Defconfig Updates for v4.12
* Enable SH Mobile I2C controller
* tag 'renesas-arm64-defconfig-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: Enable SH Mobile I2C controller
Signed-off-by: Olof Johansson <olof@lixom.net>
The previous idea was to check whether a net namespace is in
net_exit_list or not. It doesn't work, because net->exit_list is used in
__register_pernet_operations and __unregister_pernet_operations where
all namespaces are added to a temporary list to make cleanup in a error
case, so list_empty(&net->exit_list) always returns false.
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Fixes: 002d8a1a6c ("net: skip genenerating uevents for network namespaces that are exiting")
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel doesn't boot with both PROFILE_ANNOTATED_BRANCHES=y and KASAN=y
options selected. With branch profiling enabled we end up calling
ftrace_likely_update() before kasan_early_init(). ftrace_likely_update() is
built with KASAN instrumentation, so calling it before kasan has been
initialized leads to crash.
Use DISABLE_BRANCH_PROFILING define to make sure that we don't call
ftrace_likely_update() from early code before kasan_early_init().
Fixes: ef7f0d6a6c ("x86_64: add KASan support")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Alexander Potapenko <glider@google.com>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: lkp@01.org
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170313163337.1704-1-aryabinin@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix the debugfs interface for PID tuning to actually update
pid_params.sample_rate_ns on PID parameters updates, as changing
pid_params.sample_rate_ms via debugfs has no effect now.
Fixes: a4675fbc4a (cpufreq: intel_pstate: Replace timers with utilization update callbacks)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>