Commit graph

708,694 commits

Author SHA1 Message Date
Thomas Petazzoni
4e4a105f1f net: mvpp2: store physical address of buffer in rx_desc->buf_cookie
The RX descriptors of the PPv2 hardware allow to store several
information, amongst which:

 - the DMA address of the buffer in which the data has been received
 - a "cookie" field, left to the use of the driver, and not used by the
   hardware

In the current implementation, the "cookie" field is used to store the
virtual address of the buffer, so that in the receive completion path,
we can easily get the virtual address of the buffer that corresponds to
a completed RX descriptors.

On PPv2.1, used on 32-bit platforms, those two fields are 32-bit wide,
which is enough to store a DMA address in the first field, and a virtual
address in the second field.

On PPv2.2, used on 64-bit platforms, these two fields have been extended
to 40 bits. While 40 bits is enough to store a DMA address (as long as
the DMA mask is 40 bits or lower), it is not enough to store a virtual
address. Therefore, the "cookie" field can no longer be used to store
the virtual address of the buffer.

However, as Russell King pointed out, the RX buffers are always
allocated in the kernel linear mapping, and therefore using
phys_to_virt() on the physical address of the RX buffer is possible and
correct.

Therefore, this commit changes the driver to use the "cookie" field to
store the physical address instead of the virtual
address. phys_to_virt() is used in the receive completion path to
retrieve the virtual address from the physical address.

It is obviously important to realize that the DMA address and physical
address are two different things, which is why we store both in the RX
descriptors. While those addresses may be identical in some situations,
it remains two distinct concepts, and both addresses should be handled
separately.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
4d6c2a677f net: mvpp2: remove mvpp2_txq_pend_desc_num_get() function
The mvpp2_txq_pend_desc_num_get() function only selects a TX queue, and
reads the number of pending descriptors. It is used in only one place,
in mvpp2_txq_clean(), where the TX queue has already been selected by a
write to MVPP2_TXQ_NUM_REG.

Therefore, this function is useless, and the caller can simply read the
value of the MVPP2_TXQ_PENDING_REG register instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
df905f2e21 net: mvpp2: remove unused register definition MVPP2_TXQ_THRESH_REG
This register is no longer used since commit edc660fa09 ("net: mvpp2:
replace TX coalescing interrupts with hrtimer").

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
aeb3d1109a net: mvpp2: remove support for buffer header
The "buffer header" functionality is a functionality used by the
hardware to split an incoming packets over multiple BM buffers if they
are not large enough. However, the mvpp2 driver guarantees that a pool
of BM buffers has buffers with a size large enough to store MTU-sized
packets. Therefore, this functionality is completely unused, and the
code can be removed, and we should never get a descriptor with bit
MVPP2_RXD_BUF_HDR set.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
20396136fb net: mvpp2: use "dma" instead of "phys" where appropriate
As indicated by Russell King, the mvpp2 driver currently uses a lot
"phys" or "phys_addr" to store what really is a DMA address. This commit
clarifies this by using "dma" or "dma_addr" where appropriate.

This is especially important as we are going to introduce more changes
where the distinction between physical address and DMA address will be
key.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Thomas Petazzoni
aee441193e dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support
The Marvell PPv2 Device Tree binding was so far only used to describe
the PPv2.1 network controller, used in the Marvell Armada 375.

A new version of this IP block, PPv2.2 is used in the Marvell Armada
7K/8K processor. This commit extends the existing binding so that it can
also be used to describe PPv2.2 hardware.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 10:12:11 -08:00
Arushi Singhal
83e4e8d2c2 staging: ks7010: removed code in comments.
Commenting Code Is a Bad Idea.
Comments are their to explain the code and how the code achieves its
goal and as codes in the comments  does not explain what the code is
doing so there is no use of commenting them.
So in this patch codes in the comments are removed.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:09:09 +01:00
Varsha Rao
a2be06266b staging: comedi: Remove useless cast.
Variable dac_data is already declared as of type u8. Again explicit type
casting of dac_data to u8, is not required. Hence this patch removes it
by using the following coccinelle script.

@@
type T;
T *ptr;
T p;
@@
(
- (T *)(&p)
+ &p
|
- (T *)ptr
+ ptr
|
- (T *)(ptr)
+ ptr
|
- (T)(p)
+ p
)

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:07:57 +01:00
Gargi Sharma
d493859392 staging: vc04_services: Use ARRAY_SIZE macro
Use ARRAY_SIZE to calculate the size of an array.
The semantic patch used can be found here:
https://github.com/coccinelle/coccinellery/blob/master/arraysize/array.cocci

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:07:57 +01:00
Aapo Vienamo
ecf2d4aa7a staging: wlan-ng: add byte order annotation to struct p80211_caphdr
Fixes the following sparse warnings around line 3514 in hfa384x_usb.c:

warning: incorrect type in assignment (different base types)
   expected unsigned int [unsigned] [usertype] version
   got restricted __be32 [usertype] <noident>

Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:06:36 +01:00
Stefan Wahren
8d2aa8bff9 staging: vchiq_utils: Don't include headers twice
There is no need to include types.h and vmalloc.h twice.

This issue has been found by make includecheck.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:06:36 +01:00
simran singhal
6c849caf81 staging: vc04_services: Clean up tests if NULL returned on failure
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.

This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@

e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e

Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:06:36 +01:00
Varsha Rao
4e1c89dec8 staging: sm750fb: Removed unnecessary parentheses.
Removed parentheses on the right hand side of assignment, as they are
not required. The following coccinelle script was used to fix this
issue:

@@
local idexpression id;
expression e;
@@

id =
-(
e
-)

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 19:06:36 +01:00
Dmitry Torokhov
52e4f1d601 Input: dm355evm_keys - switch to using managed resources
Using devm_* APIs simpifies error handling and device teardown.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:06:19 -08:00
Dmitry Torokhov
fc2a6e5048 Input: wistron_btns - remove use of sparse_keymap_free
Now that sparse keymap uses managed memory, we no longer need to clean it
up manually.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:06:12 -08:00
Dmitry Torokhov
a227954756 Input: dm355evm_keys - remove use of sparse_keymap_free
Now that sparse keymap uses managed memory, we no longer need to clean it
up manually.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:06:11 -08:00
Dmitry Torokhov
7b179e251b Merge branch 'ib/4.10-sparse-keymap-managed' into next
This brings in version of sparse keymap code that uses managed memory.
2017-03-09 10:03:22 -08:00
Hans de Goede
a01cd17000 Input: soc_button_array - use NULL for GPIO connection ID
The gpiolib-acpi code is becoming more strict and connection-IDs
may only be used with devices which have a _DSD with matching IDs
in there. Since the soc_button_array ACPI binding is pure index
based pass in NULL as connection-ID to avoid the more strict cheks
resulting in gpiod_count and gpiod_get_index not returning any gpios.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:01:04 -08:00
Hans de Goede
9b13a4ca8d Input: axp20x-pek - do not register input device on some systems
On some systems (Intel tablets with axp288 pmic) the powerbutton is
also connected to a gpio pin of the SoC, advertised through the
"INTCFD9" / "PNP0C40" acpi device. This leads to double reporting
of powerbutton events, which is undesirable, so one driver needs
to not report input events in this case.

Since the soc_button_array driver for the "PNP0C40" acpi device
also handles wake from suspend on these tablets and since the
axp20x-pel driver requires relative expensive i2c accrsses,
it is best for the axp20x-pek driver to not register an input device
in this case.

Note that this commit leaves the axp20x-driver bound to the
device, rather then returning -ENODEV, this is done so that the
sysfs attributes it offers are kept around.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:01:03 -08:00
Hans de Goede
f2bd5a9ec5 Input: axp20x_pek - add axp20x_pek_probe_input_device helper
Move all input device related initialization into a new
axp20x_pek_probe_input_device helper function.

This introduces one functional change, the input device is now
registered before the sysfs attr get registered. This is not a problem
as the sysfs attr are to configure some long press settings (forced
poweroff) in the hardware and do not interact with the input_device.

This is a preparation patch for not always registering the input dev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:01:03 -08:00
Hans de Goede
73915f369e Input: axp20x-pek - use our own device for errors
Before this commit axp20x-pek was mixing 2 style error reporting calls:
dev_err(&pdev->dev, ...);
dev_err(axp20x->dev, ...);

But the second is our parent device, not our own device, so switch to
using &pdev->dev everywhere.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:01:02 -08:00
Jingkui Wang
bc682a50a0 Input: drv260x - remove OF dependency
As the driver is using generic device properties, it should work
properly when CONFIG_OF is turned off. This patch removes the
ifdef CONFIGOF and make sure the driver always have of_match_table.

Signed-off-by: Jingkui Wang <jkwang@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-09 10:00:14 -08:00
David S. Miller
3f2aa566d4 Merge branch 'mlx4-order-0-allocations-and-page-recycling'
Eric Dumazet says:

====================
mlx4: order-0 allocations and page recycling

As mentioned half a year ago, we better switch mlx4 driver to order-0
allocations and page recycling.

This reduces vulnerability surface thanks to better skb->truesize
tracking and provides better performance in most cases.
(33 Gbit for one TCP flow on my lab hosts)

I will provide for linux-4.13 a patch on top of this series,
trying to improve data locality as described in
https://www.spinics.net/lists/netdev/msg422258.html

v2 provides an ethtool -S new counter (rx_alloc_pages) and
code factorization, plus Tariq fix.

v3 includes various fixes based on Tariq tests and feedback
from Saeed and Tariq.

v4 rebased on net-next for inclusion in linux-4.12, as requested
by Tariq.

Worth noting this patch series deletes ~250 lines of code ;)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:48 -08:00
Eric Dumazet
68b8df4644 mlx4: remove duplicate code in mlx4_en_process_rx_cq()
We should keep one way to build skbs, regardless of GRO being on or off.

Note that I made sure to defer as much as possible the point we need to
pull data from the frame, so that future prefetch() we might add
are more effective.

These skb attributes derive from the CQE or ring :
 ip_summed, csum
 hash
 vlan offload
 hwtstamps
 queue_mapping

As a bonus, this patch removes mlx4 dependency on eth_get_headlen()
which is very often broken enough to give us headaches.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
6969cf0fdb mlx4: make validate_loopback() more generic
Testing a boolean in fast path is not worth duplicating
the code allocating packets, when GRO is on or off.

If this proves to be a problem, we might later use a jump label.

Next patch will remove this duplicated code and ease code review.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
02e6fd3e55 mlx4: factorize page_address() calls
We need to compute the frame virtual address at different points.
Do it once.

Following patch will use the new va address for validate_loopback()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
9e8c0395a7 mlx4: do not access rx_desc from mlx4_en_process_rx_cq()
Instead of fetching dma address from rx_desc->data[0].addr,
prefer using frags[0].dma + frags[0].page_offset to avoid
a potential cache line miss.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
7d7bfc6a3f mlx4: add rx_alloc_pages counter in ethtool -S
This new counter tracks number of pages that we allocated for one port.

lpaa24:~# ethtool -S eth0 | egrep 'rx_alloc_pages|rx_packets'
     rx_packets: 306755183
     rx_alloc_pages: 932897

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
34db548bfb mlx4: add page recycling in receive path
Same technique than some Intel drivers, for arches where PAGE_SIZE = 4096

In most cases, pages are reused because they were consumed
before we could loop around the RX ring.

This brings back performance, and is even better,
a single TCP flow reaches 30Gbit on my hosts.

v2: added full memset() in mlx4_en_free_frag(), as Tariq found it was needed
if we switch to large MTU, as priv->log_rx_info can dynamically be changed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
b5a54d9a31 mlx4: use order-0 pages for RX
Use of order-3 pages is problematic in some cases.

This patch might add three kinds of regression :

1) a CPU performance regression, but we will add later page
recycling and performance should be back.

2) TCP receiver could grow its receive window slightly slower,
   because skb->len/skb->truesize ratio will decrease.
   This is mostly ok, we prefer being conservative to not risk OOM,
   and eventually tune TCP better in the future.
   This is consistent with other drivers using 2048 per ethernet frame.

3) Because we allocate one page per RX slot, we consume more
   memory for the ring buffers. XDP already had this constraint anyway.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
60c7f5ae54 mlx4: removal of frag_sizes[]
We will soon use order-0 pages, and frag truesize will more precisely
match real sizes.

In the new model, we prefer to use <= 2048 bytes fragments, so that
we can use page-recycle technique on PAGE_SIZE=4096 arches.

We will still pack as much frames as possible on arches with big
pages, like PowerPC.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
acd7628de0 mlx4: reduce rx ring page_cache size
We only need to store the page and dma address.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
d85f6c14e9 mlx4: rx_headroom is a per port attribute
No need to duplicate it per RX queue / frags.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
aaca121dd6 mlx4: get rid of frag_prefix_size
Using per frag storage for frag_prefix_size is really silly.

mlx4_en_complete_rx_desc() has all needed info already.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
159ddfd2ca mlx4: remove order field from mlx4_en_frag_info
This is really a port attribute, no need to duplicate it per
RX queue and per frag.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
Eric Dumazet
69ba943151 mlx4: dma_dir is a mlx4_en_priv attribute
No need to duplicate it for all queues and frags.

num_frags & log_rx_info become u8 to save space.
u8 accesses are a bit faster than u16 anyway.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09 09:54:46 -08:00
simran singhal
e5619b1350 staging: rts5208: Remove unnecessary cast on void pointer
The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)

Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:50:05 +01:00
Gargi Sharma
c95d2e87fc staging: gdm724x: Replace ternary operator with min macro
Use macro min() to get the minimum of two values for
brevity and readability. The macro MUX_TX_MAX_SIZE
has a value of 2048 which is well within the integer
limits. This check was done manually.

Found using Coccinelle:
@@ type T; T x; T y; @@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:50:05 +01:00
Bjorn Helgaas
6e347b5e05 PCI: iproc: Save host bridge window resource in struct iproc_pcie
The host bridge memory window resource is inserted into the iomem_resource
tree and cannot be deallocated until the host bridge itself is removed.

Previously, the window was on the stack, which meant the iomem_resource
entry pointed into the stack and was corrupted as soon as the probe
function returned, which caused memory corruption and errors like this:

  pcie_iproc_bcma bcma0:8: resource collision: [mem 0x40000000-0x47ffffff] conflicts with PCIe MEM space [mem 0x40000000-0x47ffffff]

Move the memory window resource from the stack into struct iproc_pcie so
its lifetime matches that of the host bridge.

Fixes: c3245a5664 ("PCI: iproc: Request host bridge window resources")
Reported-and-tested-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.8+
2017-03-09 11:27:07 -06:00
Tiberiu Breana
55edcbb2db ARM: imx: Add AXI address filter support for MMDC profiling
Add support for an extra config parameter for perf commands:
axi_id, which will be written in the MMDC's MADPCR1 register,
to filter memory usage profiling (see i.MX6 reference manual,
chapter 44.7 MMDC Profiling for AXI id usage).

Signed-off-by: Tiberiu Breana <andrei-tiberiu.breana@nxp.com>
Acked-by: Frank Li <Frank.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-09 18:19:27 +01:00
Matthieu Simon
9304b5b0d4 staging: rtl8192u: Fix sparse warnings in r8192U_dm.c
Fix these warnings:
drivers/staging//rtl8192u/r8192U_dm.c:2307:49: warning: cast from restricted __le16
drivers/staging//rtl8192u/r8192U_dm.c:2308:44: warning: cast from restricted __le16
drivers/staging//rtl8192u/r8192U_dm.c:2309:44: warning: cast from restricted __le16

Signed-off-by: Matthieu Simon <gmatthsim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:19:07 +01:00
Sebastian Haas
36a803d8c0 staging: rtl8188eu: fix typos in macros
Rename macro definition and usage to represent correct spelling of DEFAULT:
ODM_REG_RX_DEFUALT_A_11N => ODM_REG_RX_DEFAULT_A_11N
ODM_REG_RX_DEFUALT_B_11N => ODM_REG_RX_DEFAULT_B_11N

Signed-off-by: Sebastian Haas <sehaas@deebas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:19:07 +01:00
Sebastian Haas
fae4ab6b4b staging: rtl8188eu: fix typos in comments
Fix typos reported by checkpatch.pl

Signed-off-by: Sebastian Haas <sehaas@deebas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:19:07 +01:00
simran singhal
3956c8ac39 staging: rtl8192u: Clean up tests if NULL returned on failure
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.

This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@

e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e

Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:19:07 +01:00
Tiberiu Breana
579616bac1 ARM: imx: Fix mmdc_pmu_write_accesses event definition
Fixed an error in the "write-accesses" event definition.

Signed-off-by: Tiberiu Breana <andrei-tiberiu.breana@nxp.com>
Acked-by: Frank Li <Frank.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-09 18:18:43 +01:00
Elia Geretto
c946c698bc Staging: rtl8192u: clean up some white space issues
This patch fixes two coding style errors, reported by the checkpatch
script.

Signed-off-by: Elia Geretto <elia.f.geretto@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:18:20 +01:00
Georgiana Rodica Chelu
8ad835b9bc staging: rtl8192e: Indent the code
Indent the code in order to follow the rules and to
increase the readability of the code.

Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:18:20 +01:00
Gargi Sharma
4db665e50c staging: rtl8192e: Remove useless type conversion
Some type conversions like casting a pointer/non-pointer to a pointer of same type,
casting to the original type using addressof(&) operator, etc. are not needed.
Therefore, remove them. Done using coccinelle:

@@
type t;
t *p;
t a;
@@
(
- (t)(a)
+ a
|
- (t *)(p)
+ p
|
- (t *)(&a)
+ &a
)

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:18:20 +01:00
Tamara Diaconita
1f9f72f46a staging: cxd2099: Remove redundant code
Removed redundant code marked with #if 0 to fix the following
checkpath.pl issue: CHECK: if this code is redundant consider
removing it.

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:15:08 +01:00
Tamara Diaconita
783dd92b5b staging: cxd2099: Change kzalloc parameter
Changed the structure tag 'struct cxd' with the variable '*ci' to fix the
following checkpath.pl issue: CHECK: Prefer kzalloc(sizeof(*ci)...) over
kzalloc(sizeof(struct cxd)).

Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 18:15:08 +01:00