mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-22 19:14:51 +00:00
172,694 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
e7fef85039 |
serdev: Convert to_serdev_*() helpers to macros and use container_of_const()
If these helpers receive the 'const struct device' pointer, then the const qualifier will get dropped, leading to below warning: warning: passing argument 1 of ‘to_serdev_device_driver’ discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] This is not an issue as of now, but with the future commits adding serdev device based driver matching, this warning will get triggered. Hence, convert these helpers to macros so that the qualifier get preserved and also use container_of_const() as container_of() is deprecated. Tested-by: Hans de Goede <johannes.goede@oss.qualcomm.com> # ThinkPad T14s gen6 (arm64) Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260326-pci-m2-e-v7-1-43324a7866e6@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> |
||
|
|
fbf3380361 |
fsverity fixes for v7.0-rc1
- Fix a build error on parisc - Remove the non-large-folio-aware function fsverity_verify_page() -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaZtg+xQcZWJpZ2dlcnNA a2VybmVsLm9yZwAKCRDzXCl4vpKOKwQ+AQCiXEYAibl3vHRgQo7qEPCC5or4FtkF HZ0ERRArhsU17AD/TKHE/AJkyFrwK4rGTb6I9Wi1OXnpG7jihZlYjj03Ag4= =CUql -----END PGP SIGNATURE----- Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux Pull fsverity fixes from Eric Biggers: - Fix a build error on parisc - Remove the non-large-folio-aware function fsverity_verify_page() * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: fix build error by adding fsverity_readahead() stub fsverity: remove fsverity_verify_page() f2fs: make f2fs_verify_cluster() partially large-folio-aware f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster() |
||
|
|
d2ba6e9c0a |
rv fixes for v7.0
Summary of changes: - Fix multiple definition of __pcpu_unique_da_mon_this After refactoring monitors, we used static per-cpu variables with the same names across different per-cpu monitors. This is explicitly disallowed for modules on some architectures (alpha) or if CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug kernel). Make sure all those variables have different names to avoid compilation issues. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaZoJ1BQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qkykAP41lj9VAe0dM81f20IfOBhqIBZPS6MP ajRGZ9bz1ZiJwwD/dHm+APheD7umImzoDXpW1IJxgNPlZTnpte3WyhIYaQs= =HxRz -----END PGP SIGNATURE----- Merge tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull runtime verifier fix from Steven Rostedt: - Fix multiple definition of __pcpu_unique_da_mon_this After refactoring monitors, we used static per-cpu variables with the same names across different per-cpu monitors. This is explicitly disallowed for modules on some architectures (alpha) or if CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug kernel). Make sure all those variables have different names to avoid compilation issues. * tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rv: Fix multiple definition of __pcpu_unique_da_mon_this |
||
|
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
e19e1b480a |
add default_gfp() helper macro and use it in the new *alloc_obj() helpers
Most simple allocations use GFP_KERNEL, and with the new allocation
helpers being introduced, let's just take advantage of that to simplify
that default case.
It's a numbers game:
git grep 'alloc_obj(' |
sed 's/.*\(GFP_[_A-Z]*\).*/\1/' |
sort | uniq -c | sort -n | tail
shows that about 90% of all those new allocator instances just use that
standard GFP_KERNEL.
Those helpers are already macros, and we can easily just make it be the
default case when the gfp argument is missing.
And yes, we could do that for all the legacy interfaces too, but let's
keep it to just the new ones at least for now, since those all got
converted recently anyway, so this is not any "extra" noise outside of
that limited conversion.
And, in fact, I want to do this before doing the -rc1 release, exactly
so that we don't get extra merge conflicts.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
fa5c82f4d2 |
slab.h: disable completely broken overflow handling in flex allocations
Commit |
||
|
|
8934827db5 |
kmalloc_obj treewide refactoring for v7.0-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaZl14wAKCRA2KwveOeQk uz8aAQCBFLYlij3Y3ivVADkBxuVF3xECaznFya41ENYsBwlHdwEArXqMyNrw+DiG TvWCK/tiddNmGIRpI2sxBFzyRpsHfAY= =rVD3 -----END PGP SIGNATURE----- Merge tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kmalloc_obj conversion from Kees Cook: "This does the tree-wide conversion to kmalloc_obj() and friends using coccinelle, with a subsequent small manual cleanup of whitespace alignment that coccinelle does not handle. This uncovered a clang bug in __builtin_counted_by_ref(), so the conversion is preceded by disabling that for current versions of clang. The imminent clang 22.1 release has the fix. I've done allmodconfig build tests for x86_64, arm64, i386, and arm. I did defconfig builds for alpha, m68k, mips, parisc, powerpc, riscv, s390, sparc, sh, arc, csky, xtensa, hexagon, and openrisc" * tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kmalloc_obj: Clean up after treewide replacements treewide: Replace kmalloc with kmalloc_obj for non-scalar types compiler_types: Disable __builtin_counted_by_ref for Clang |
||
|
|
9813616045 |
NTB updates include debugfs improvements, correctness fixes,
cleanups, and new hardware support. ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload module parameter is introduced with associated ordering fixes, and a debugfs queue name truncation bug is corrected. Additional fixes address format specifier mismatches in ntb_tool and boundary conditions in the Switchtec driver, while unused MSI helpers are removed and the codebase migrates to dma_map_phys(). Intel Gen6 (Diamond Rapids) NTB support is also added. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoE9b9c3U2JxX98mqbmZLrHqL0iMFAmmZvucACgkQbmZLrHqL 0iMQ+w/9E6w4FMT5QN8WlSq51RKEyzmSekja0DGyKmUzsWqES+YPN1Tu7rnqZBaF TmX8n86Fr5oF+I/0gOx9AeBBTIuX4+ZpNi1W3DOTeV+ea8kHDzGzDKAYZixjntbL iYGGOrd5zFzeYVCSsMkuhPtFLUKOeX9+oGlQ7hHYiV0rqiOkRycLFksuTwHI3elm fUJPolTeKZrIWVeHUK11mYkQ62WfVCRq2LqGLgk47hvx2osAE6PAZ+TB4zJc5o5L OUX/XhZRzakjFjtcHiDyiLRQ12d9/i2Ct/HReaCJPKyyG0RZWotDvrXabgKfTzuP Sl1Xtkn290fl/1CtlFiJueEl5LU83JlOzNaFkFBc/G2erYUTrYV5SLTKraOU/VLY CKNqovI0elePTEA710g9f44VJkDsPZ4Y1JC0js7gb9kxFpj2S1mhxOjMhieQWUqX Rl0MAKA8yFnVsqk5QKCerGEHpr6rwWXKeuC0VRpe50Q8LbvwJmsu6FxTIlfeaI3d vIZRZoGRCJeho/YL2X4y71oe5VQrDvktWvd38jDhHeBwe5SDo9xYIie5KsdtcXsj HNwrj7xZxFDWG2XlirIR1KewjoG9JkqbB73KtVlRSm/3+Pb48xBD/mqXLnohrDDj YSXO9COR//iisWdY29vn1KV9INfktUQ59ZunU0HvFsX4xXcLj3o= =UZw9 -----END PGP SIGNATURE----- Merge tag 'ntb-7.0' of https://github.com/jonmason/ntb Pull NTB (PCIe non-transparent bridge) updates from Jon Mason: "NTB updates include debugfs improvements, correctness fixes, cleanups, and new hardware support: ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload module parameter is introduced with associated ordering fixes, and a debugfs queue name truncation bug is corrected. Additional fixes address format specifier mismatches in ntb_tool and boundary conditions in the Switchtec driver, while unused MSI helpers are removed and the codebase migrates to dma_map_phys(). Intel Gen6 (Diamond Rapids) NTB support is also added" * tag 'ntb-7.0' of https://github.com/jonmason/ntb: NTB: ntb_transport: Use seq_file for QP stats debugfs NTB: ntb_transport: Fix too small buffer for debugfs_name ntb/ntb_tool: correct sscanf format for u64 and size_t in tool_peer_mw_trans_write ntb: intel: Add Intel Gen6 NTB support for DiamondRapids NTB/msi: Remove unused functions ntb: ntb_hw_switchtec: Increase MAX_MWS limit to 256 ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut NTB: epf: allow built-in build ntb: migrate to dma_map_phys instead of map_page NTB: ntb_transport: Add 'tx_memcpy_offload' module option NTB: ntb_transport: Remove unused 'retries' field from ntb_queue_entry |
||
|
|
f9d66e64a2 |
io_uring-20260221
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmmZszYQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpvW9D/9qI0JrQ7zw9/zjFVOqFHVbwJUErTwUiSE/ bKpbDOUcm1utiTIw8nWuhhmXbPq8MT+3Uyyk24UFpcIM+QZrqUHRRPYcqHwNy0mw 3QXZut2QkwHKO/tWoKXIguCVQKtPteBjfH+La1IRZPLKK+MozQEloGMulbZwIP0j ynEX7tA8VYwuGtgmzBiTt7Ba2W5EIJ0SSfmdY9XajKDHrZCksx5iHnC/uJg0qEc0 QQr4YZisyz4VxG4MxsJvpv6/wiic07MRSYa5cJXntknmPGc9zj6wg79WWB/lkbuA w95+X+EorHyCvKk2Ny9uwl1/UOp9VQbKQnVIZ58LBC4ILPj6Qk7a7WyxTbfl358d QNhrcspgcLwakQkVkhR1Z4SaCqMdc6i1hXx5m2nhXFevKipeyg11uoM75bZEzWsN 63+6+S1upwSqFTk2nto8gKg+7aMGOvjT/Ae0kNvUD/WPXSkC66gSzADZdv2C4i4Y QdFs8UN8jKRXd5Rx7pthAM0E//XFHko/tGJnHUIzQ3Nk7xeXp4BeXOdp/m/FvpDe BakTvLHvvk5s1X9Bkv5hSXua6ZBFlgcsqn5VdVplQOdWPKwU0Mjg28z6AAzdZxLF mCcgDqDqls19E9HI7nFJOUJtBQjoCl4sVEuPvs06agY04sJTXWkYph5pwhkNJOKD NwumZJpb2A== =Pkge -----END PGP SIGNATURE----- Merge tag 'io_uring-20260221' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux Pull io_uring fixes from Jens Axboe: - A fix for a missing URING_CMD128 opcode check, fixing an issue with the SQE mixed mode support introduced in 6.19. Merged late due to having multiple dependencies - Add sqe->cmd size checking for big SQEs, similar to what we have for normal sized SQEs - Fix a race condition in zcrx, that leads to a double free * tag 'io_uring-20260221' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring: Add size check for sqe->cmd io_uring: add IORING_OP_URING_CMD128 to opcode checks io_uring/zcrx: fix user_ref race between scrub and refill paths |
||
|
|
7a70c15bd1 |
kmalloc_obj: Clean up after treewide replacements
Coccinelle doesn't handle re-indenting line escapes. Fix the 2 places where these got misaligned. Remove 2 now-redundant type casts, found with: $ git grep -P 'struct (\S+).*\)\s*k\S+alloc_(objs?|flex)\(struct \1' Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
d39a1d7486 |
compiler_types: Disable __builtin_counted_by_ref for Clang
Unfortunately, there is a corner case of __builtin_counted_by_ref() usage that crashes[1] Clang since support was introduced in Clang 19. Disable it prior to Clang 22. Found while tested kmalloc_obj treewide refactoring (via kmalloc_flex() usage). Link: https://github.com/llvm/llvm-project/issues/182575 [1] Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
d4a292c5f8 |
drm next fixes for 7.0-rc1
pagemap: - drm/pagemap: pass pagemap_addr by reference amdgpu: - DML 2.1 fixes - Panel replay fixes - Display writeback fixes - MES 11 old firmware compat fix - DC CRC improvements - DPIA fixes - XGMI fixes - ASPM fix - SMU feature bit handling fixes - DC LUT fixes - RAS fixes - Misc memory leak in error path fixes - SDMA queue reset fixes - PG handling fixes - 5 level GPUVM page table fix - SR-IOV fix - Queue reset fix - SMU 13.x fixes - DC resume lag fix - MPO fixes - DCN 3.6 fix - VSDB fixes - HWSS clean up - Replay fixes - DCE cursor fixes - DCN 3.5 SR DDR5 latency fixes - HPD fixes - Error path unwind fixes - SMU13/14 mode1 reset fixes - PSP 15 updates - SMU 15 updates - Sync fix in amdgpu_dma_buf_move_notify() - HAINAN fix - PSP 13.x fix - GPUVM locking fix - Fixes for DC analog support - DC FAMS fixes - DML 2.1 fixes - eDP fixes - Misc DC fixes - Fastboot fix - 3DLUT fixes - GPUVM fixes - 64bpp format fix - Fix for MacBooks with switchable gfx amdkfd: - Fix possible double deletion of validate list - Event setup fix - Device disconnect regression fix - APU GTT as VRAM fix - Fix piority inversion with MQDs - NULL check fix radeon: - HAINAN fix i915/xe display: - Regresion fix for HDR 4k displays (#15503) - Fixup for Dell XPS 13 7390 eDP rate limit - Memory leak fix on ACPI _DSM handling - Add missing slice count check during DP mode validation xe: - drm/xe: Prevent VFs from exposing the CCS mode sysfs file - SRIOV related fixes - PAT cache fix - MMIO read fix - W/a fixes - Adjust type of xe_modparam.force_vram_bar_size - Wedge mode fix - HWMon fix -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmmYyNEACgkQDHTzWXnE hr7n0Q/+L4KscEx0ByCOBNfWJollaJKZEpdeWLQ2J9RSa/hPVOTE+k2z/TokCsYw jYIHCv8UBU/VvffWWHj0CHCRSRFcfwWo9bZm0J0C6vRSL77iXJPUDZOZ/EhP7Cy3 oMZyexBcVTwNqzI2cg8PYsGkTMPpdBUxrSNxa9d15kNJbMSm5RdAMJ4pt/9Id9V4 iCGQccsNZN8d9JdPzYU/Tay2RQOD/75l9xtywq4vb8Ktszc7gWFca+tRleYZxbtG WuXvMStqmZAUZJaTbSASbSQFQMEdyJXSsFq/T0cY1Mm5DSUqnJ27YqOzL5sqzQTE +Aeh5w5xEgq/GaLzdx9tOSxBr6mK7p251RApSunPn4nwb50iT8dBAqaYh8Zy2e0o vQtFgp3PLlnqwvdvEtqPoq6+oG/FtIsULLPLuMqlZtOe3EG7BzQsWeWASj793EtN KrTu4a9HufzZrf+t8a3ZLp2CMQJI5sCCBZBJiZ6/ImiixBEH5bJzSLPhdx7VeoMe //kVBbhYXD8oi8QMcJHdZg9ERp80D1yYJhhGWes330s1tdl87Gizy4Mu4pSH9Mds bw7u6PTS7iI7hoXvz/ITrrHkFTkxLsxVhPI2OhLAfRpIEoH9XOFgi+BCmZOEb9lT V5RhIDxrKpjQcgJ9d9dAM2arO11kTPdVTEH4tYpzQ5cHd17mls4= =SQjl -----END PGP SIGNATURE----- Merge tag 'drm-next-2026-02-21' of https://gitlab.freedesktop.org/drm/kernel Pull drm fixes from Dave Airlie: "This is the fixes and cleanups for the end of the merge window, it's nearly all amdgpu, with some amdkfd, then a pagemap core fix, i915/xe display fixes, and some xe driver fixes. Nothing seems out of the ordinary, except amdgpu is a little more volume than usual. pagemap: - drm/pagemap: pass pagemap_addr by reference amdgpu: - DML 2.1 fixes - Panel replay fixes - Display writeback fixes - MES 11 old firmware compat fix - DC CRC improvements - DPIA fixes - XGMI fixes - ASPM fix - SMU feature bit handling fixes - DC LUT fixes - RAS fixes - Misc memory leak in error path fixes - SDMA queue reset fixes - PG handling fixes - 5 level GPUVM page table fix - SR-IOV fix - Queue reset fix - SMU 13.x fixes - DC resume lag fix - MPO fixes - DCN 3.6 fix - VSDB fixes - HWSS clean up - Replay fixes - DCE cursor fixes - DCN 3.5 SR DDR5 latency fixes - HPD fixes - Error path unwind fixes - SMU13/14 mode1 reset fixes - PSP 15 updates - SMU 15 updates - Sync fix in amdgpu_dma_buf_move_notify() - HAINAN fix - PSP 13.x fix - GPUVM locking fix - Fixes for DC analog support - DC FAMS fixes - DML 2.1 fixes - eDP fixes - Misc DC fixes - Fastboot fix - 3DLUT fixes - GPUVM fixes - 64bpp format fix - Fix for MacBooks with switchable gfx amdkfd: - Fix possible double deletion of validate list - Event setup fix - Device disconnect regression fix - APU GTT as VRAM fix - Fix piority inversion with MQDs - NULL check fix radeon: - HAINAN fix i915/xe display: - Regresion fix for HDR 4k displays (#15503) - Fixup for Dell XPS 13 7390 eDP rate limit - Memory leak fix on ACPI _DSM handling - Add missing slice count check during DP mode validation xe: - drm/xe: Prevent VFs from exposing the CCS mode sysfs file - SRIOV related fixes - PAT cache fix - MMIO read fix - W/a fixes - Adjust type of xe_modparam.force_vram_bar_size - Wedge mode fix - HWMon fix * tag 'drm-next-2026-02-21' of https://gitlab.freedesktop.org/drm/kernel: (143 commits) drm/amd/display: Remove unneeded DAC link encoder register drm/amd/display: Enable DAC in DCE link encoder drm/amd/display: Set CRTC source for DAC using registers drm/amd/display: Initialize DAC in DCE link encoder using VBIOS drm/amd/display: Turn off DAC in DCE link encoder using VBIOS drm/amd/display: Don't call find_analog_engine() twice drm/amdgpu: fix 4-level paging if GMC supports 57-bit VA v2 drm/amdgpu: keep vga memory on MacBooks with switchable graphics drm/amdgpu: Set atomics to true for xgmi drm/amdkfd: Check for NULL return values drm/amd/display: Use same max plane scaling limits for all 64 bpp formats drm/amdgpu: Set vmid0 PAGE_TABLE_DEPTH for GFX12.1 drm/amdkfd: Disable MQD queue priority drm/amd/display: Remove conditional for shaper 3DLUT power-on drm/amd/display: Check return of shaper curve to HW format drm/amd/display: Correct logic check error for fastboot drm/amd/display: Skip eDP detection when no sink Revert "drm/amd/display: Add Gfx Base Case For Linear Tiling Handling" Revert "drm/amd/display: Correct hubp GfxVersion verification" Revert "drm/amd/display: Add Handling for gfxversion DcGfxBase" ... |
||
|
|
68010e7b3d |
Tracing fixes for 7.0:
- Fix possible dereference of uninitialized pointer When validating the persistent ring buffer on boot up, if the first validation fails, a reference to "head_page" is performed in the error path, but it skips over the initialization of that variable. Move the initialization before the first validation check. - Fix use of event length in validation of persistent ring buffer On boot up, the persistent ring buffer is checked to see if it is valid by several methods. One being to walk all the events in the memory location to make sure they are all valid. The length of the event is used to move to the next event. This length is determined by the data in the buffer. If that length is corrupted, it could possibly make the next event to check located at a bad memory location. Validate the length field of the event when doing the event walk. - Fix function graph on archs that do not support use of ftrace_ops When an architecture defines HAVE_DYNAMIC_FTRACE_WITH_ARGS, it means that its function graph tracer uses the ftrace_ops of the function tracer to call its callbacks. This allows a single registered callback to be called directly instead of checking the callback's meta data's hash entries against the function being traced. For architectures that do not support this feature, it must always call the loop function that tests each registered callback (even if there's only one). The loop function tests each callback's meta data against its hash of functions and will call its callback if the function being traced is in its hash map. The issue was that there was no check against this and the direct function was being called even if the architecture didn't support it. This meant that if function tracing was enabled at the same time as a callback was registered with the function graph tracer, its callback would be called for every function that the function tracer also traced, even if the callback's meta data only wanted to be called back for a small subset of functions. Prevent the direct calling for those architectures that do not support it. - Fix references to trace_event_file for hist files The hist files used event_file_data() to get a reference to the associated trace_event_file the histogram was attached to. This would return a pointer even if the trace_event_file is about to be freed (via RCU). Instead it should use the event_file_file() helper that returns NULL if the trace_event_file is marked to be freed so that no new references are added to it. - Wake up hist poll readers when an event is being freed When polling on a hist file, the task is only awoken when a hist trigger is triggered. This means that if an event is being freed while there's a task waiting on its hist file, it will need to wait until the hist trigger occurs to wake it up and allow the freeing to happen. Note, the event will not be completely freed until all references are removed, and a hist poller keeps a reference. But it should still be woken when the event is being freed. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaZd4ExQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qqX5AP4powfnNnRfLSKH9idhTp+ltmJ+9roy L7kWTr/z20S2VQEAk331PNZ32uZu+/ZUETYpgtEx4SbRGZFehTBv1ddjfw4= =TWj5 -----END PGP SIGNATURE----- Merge tag 'trace-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix possible dereference of uninitialized pointer When validating the persistent ring buffer on boot up, if the first validation fails, a reference to "head_page" is performed in the error path, but it skips over the initialization of that variable. Move the initialization before the first validation check. - Fix use of event length in validation of persistent ring buffer On boot up, the persistent ring buffer is checked to see if it is valid by several methods. One being to walk all the events in the memory location to make sure they are all valid. The length of the event is used to move to the next event. This length is determined by the data in the buffer. If that length is corrupted, it could possibly make the next event to check located at a bad memory location. Validate the length field of the event when doing the event walk. - Fix function graph on archs that do not support use of ftrace_ops When an architecture defines HAVE_DYNAMIC_FTRACE_WITH_ARGS, it means that its function graph tracer uses the ftrace_ops of the function tracer to call its callbacks. This allows a single registered callback to be called directly instead of checking the callback's meta data's hash entries against the function being traced. For architectures that do not support this feature, it must always call the loop function that tests each registered callback (even if there's only one). The loop function tests each callback's meta data against its hash of functions and will call its callback if the function being traced is in its hash map. The issue was that there was no check against this and the direct function was being called even if the architecture didn't support it. This meant that if function tracing was enabled at the same time as a callback was registered with the function graph tracer, its callback would be called for every function that the function tracer also traced, even if the callback's meta data only wanted to be called back for a small subset of functions. Prevent the direct calling for those architectures that do not support it. - Fix references to trace_event_file for hist files The hist files used event_file_data() to get a reference to the associated trace_event_file the histogram was attached to. This would return a pointer even if the trace_event_file is about to be freed (via RCU). Instead it should use the event_file_file() helper that returns NULL if the trace_event_file is marked to be freed so that no new references are added to it. - Wake up hist poll readers when an event is being freed When polling on a hist file, the task is only awoken when a hist trigger is triggered. This means that if an event is being freed while there's a task waiting on its hist file, it will need to wait until the hist trigger occurs to wake it up and allow the freeing to happen. Note, the event will not be completely freed until all references are removed, and a hist poller keeps a reference. But it should still be woken when the event is being freed. * tag 'trace-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Wake up poll waiters for hist files when removing an event tracing: Fix checking of freed trace_event_file for hist files fgraph: Do not call handlers direct when not using ftrace_ops tracing: ring-buffer: Fix to check event length before using ring-buffer: Fix possible dereference of uninitialized pointer |
||
|
|
7bd27439a5 |
NTB/msi: Remove unused functions
ntbm_msi_free_irq() and ntb_msi_peer_addr() were both added in 2019's
commit
|
||
|
|
ae9e865457 |
UAPI Changes:
- drm/xe: Prevent VFs from exposing the CCS mode sysfs file (Nareshkumar) Cross-subsystem Changes: - drm/pagemap: pass pagemap_addr by reference (Arnd) Driver Changes: - SRIOV related fixes (Michal, Piotr) - PAT cache fix (Jia) - MMIO read fix (Shuicheng) - W/a fixes (Roper) - Adjust type of xe_modparam.force_vram_bar_size (Shuicheng) - Wedge mode fix (Raag) - HWMon fix (Karthik) -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmmXkVkACgkQ+mJfZA7r E8q9MQf+P4k2i+Bd/0yLWBWMl4XPRiEBY+rCrACogn1n+jQK1ApeJVlFZCzTnyEf 2Js5LXSHkXnP6SEiLkmDBFK7gwB8rBOJFmOR26WXmKM0sUQJZ+f5GYEZdKrD5sMh ZKPdWS/apohKzj04niVoHC/+EGgPlKOyJYZjyT6n0MrvSy83kyWcJA4vJ4QG4Tm8 MtlSAId/2VNNVDvasKieRn4yTUKzO/d8h8ES+gW8MsrrZ9WMYeb4cxkV2fIYFB9u JjVqxvAR3fX4FSkIAcCjagsIatF6/skthZ7s9GDM2zLweuNrH/xH6NlcpC4rt8Wm cpsaHypFai8UuVDqPTWB0jrSdKqNoQ== =XCdt -----END PGP SIGNATURE----- Merge tag 'drm-xe-next-fixes-2026-02-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - drm/xe: Prevent VFs from exposing the CCS mode sysfs file (Nareshkumar) Cross-subsystem Changes: - drm/pagemap: pass pagemap_addr by reference (Arnd) Driver Changes: - SRIOV related fixes (Michal, Piotr) - PAT cache fix (Jia) - MMIO read fix (Shuicheng) - W/a fixes (Roper) - Adjust type of xe_modparam.force_vram_bar_size (Shuicheng) - Wedge mode fix (Raag) - HWMon fix (Karthik) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patch.msgid.link/aZeR6CXDRbeudIVR@intel.com |
||
|
|
d31558c077 |
hyperv-next for v7.0
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmmWuQwTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXnnHB/41Jji+y8FHe2SqpQhUOqHb6NDEr3GX YpAybhz2IsBHVhbCQn789UiIcSr0UDR7wnVLAmXe+5eY/jRwNggIO3tFqLYn92pK KSTNafgNbLxh3iKBxRsUy0b3JutjD2LytkpFj2KVbBsZfmRxCZmKIV/4V18rV+fA uemvoqLwU7emEWkhZ24suHMHPVpv6xKs9O6gOrQ4+zXR0g//eMLDqb17uj8h+8sM ZsPsMYeuOihXlvGeBRjbnWYjA1ODWGDvwR9VT+VU4+HWht/KSr15EGeXZdV2eZUt e/8swbqOS94a2ZjOgStzVkcPqAF88t9zZ+gvYElTDzLlHjqbrZdpeDDt =A7tT -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20260218' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - Debugfs support for MSHV statistics (Nuno Das Neves) - Support for the integrated scheduler (Stanislav Kinsburskii) - Various fixes for MSHV memory management and hypervisor status handling (Stanislav Kinsburskii) - Expose more capabilities and flags for MSHV partition management (Anatol Belski, Muminul Islam, Magnus Kulke) - Miscellaneous fixes to improve code quality and stability (Carlos López, Ethan Nelson-Moore, Li RongQing, Michael Kelley, Mukesh Rathor, Purna Pavan Chandra Aekkaladevi, Stanislav Kinsburskii, Uros Bizjak) - PREEMPT_RT fixes for vmbus interrupts (Jan Kiszka) * tag 'hyperv-next-signed-20260218' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (34 commits) mshv: Handle insufficient root memory hypervisor statuses mshv: Handle insufficient contiguous memory hypervisor status mshv: Introduce hv_deposit_memory helper functions mshv: Introduce hv_result_needs_memory() helper function mshv: Add SMT_ENABLED_GUEST partition creation flag mshv: Add nested virtualization creation flag Drivers: hv: vmbus: Simplify allocation of vmbus_evt mshv: expose the scrub partition hypercall mshv: Add support for integrated scheduler mshv: Use try_cmpxchg() instead of cmpxchg() x86/hyperv: Fix error pointer dereference x86/hyperv: Reserve 3 interrupt vectors used exclusively by MSHV Drivers: hv: vmbus: Use kthread for vmbus interrupts on PREEMPT_RT x86/hyperv: Remove ASM_CALL_CONSTRAINT with VMMCALL insn x86/hyperv: Use savesegment() instead of inline asm() to save segment registers mshv: fix SRCU protection in irqfd resampler ack handler mshv: make field names descriptive in a header struct x86/hyperv: Update comment in hyperv_cleanup() mshv: clear eventfd counter on irqfd shutdown x86/hyperv: Use memremap()/memunmap() instead of ioremap_cache()/iounmap() ... |
||
|
|
75f3cf0d15 |
rv: Fix multiple definition of __pcpu_unique_da_mon_this
The refactoring in commit |
||
|
|
9678e53179 |
tracing: Wake up poll waiters for hist files when removing an event
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes:
|
||
|
|
f4ff9f646a |
fgraph: Do not call handlers direct when not using ftrace_ops
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes:
|
||
|
|
8bf22c33e7 |
Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qSCj
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
|
||
|
|
47bf2e8138 |
net/mlx5: Fix multiport device check over light SFs
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes:
|
||
|
|
ea129e55c9 |
io_uring: Add size check for sqe->cmd
For SQE128, sqe->cmd provides 80 bytes for uring_cmd. Add macro to check if size of user struct does not exceed 80 bytes at compile time. User doesn't have to track this manually during development. Replace io_uring_sqe_cmd() inline func with macro and add io_uring_sqe128_cmd() which checks struct size for 16 bytes cmd and 80 bytes cmd respectively. Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
|
158ebb578c |
mshv: Handle insufficient root memory hypervisor statuses
When creating guest partition objects, the hypervisor may fail to allocate root partition pages and return an insufficient memory status. In this case, deposit memory using the root partition ID instead. Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Reviewed-by: Mukesh R <mrathor@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
cf82dd5ea9 |
mshv: Handle insufficient contiguous memory hypervisor status
The HV_STATUS_INSUFFICIENT_CONTIGUOUS_MEMORY status indicates that the hypervisor lacks sufficient contiguous memory for its internal allocations. When this status is encountered, allocate and deposit HV_MAX_CONTIGUOUS_ALLOCATION_PAGES contiguous pages to the hypervisor. HV_MAX_CONTIGUOUS_ALLOCATION_PAGES is defined in the hypervisor headers, a deposit of this size will always satisfy the hypervisor's requirements. Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Reviewed-by: Mukesh R <mrathor@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
ede54383e6 |
mshv: Introduce hv_deposit_memory helper functions
Introduce hv_deposit_memory_node() and hv_deposit_memory() helper functions to handle memory deposit with proper error handling. The new hv_deposit_memory_node() function takes the hypervisor status as a parameter and validates it before depositing pages. It checks for HV_STATUS_INSUFFICIENT_MEMORY specifically and returns an error for unexpected status codes. This is a precursor patch to new out-of-memory error codes support. No functional changes intended. Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Reviewed-by: Mukesh R <mrathor@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
7db44aa173 |
mshv: Introduce hv_result_needs_memory() helper function
Replace direct comparisons of hv_result(status) against HV_STATUS_INSUFFICIENT_MEMORY with a new hv_result_needs_memory() helper function. This improves code readability and provides a consistent and extendable interface for checking out-of-memory conditions in hypercall results. No functional changes intended. Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Reviewed-by: Mukesh R <mrathor@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
eeccf287a2 |
mm.git review status for linus..mm-stable
Total patches: 36 Reviews/patch: 1.77 Reviewed rate: 83% - The 2 patch series "mm/vmscan: fix demotion targets checks in reclaim/demotion" from Bing Jiao fixes a couple of issues in the demotion code - pages were failed demotion and were finding themselves demoted into disallowed nodes. - The 11 patch series "Remove XA_ZERO from error recovery of dup_mmap()" from Liam Howlett fixes a rare mapledtree race and performs a number of cleanups. - The 13 patch series "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use them" from Lorenzo Stoakes implements a lot of cleanups following on from the conversion of the VMA flags into a bitmap. - The 5 patch series "support batch checking of references and unmapping for large folios" from Baolin Wang implements batching to greatly improve the performance of reclaiming clean file-backed large folios. - The 3 patch series "selftests/mm: add memory failure selftests" from Miaohe Lin does as claimed. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaZaIEQAKCRDdBJ7gKXxA jj73AQCQDwLoipDiQRGyjB5BDYydymWuDoiB1tlDPHfYAP3b/QD/UQtVlOEXqwM3 naOKs3NQ1pwnfhDaQMirGw2eAnJ1SQY= =6Iif -----END PGP SIGNATURE----- Merge tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a couple of issues in the demotion code - pages were failed demotion and were finding themselves demoted into disallowed nodes (Bing Jiao) - "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare mapledtree race and performs a number of cleanups (Liam Howlett) - "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use them" implements a lot of cleanups following on from the conversion of the VMA flags into a bitmap (Lorenzo Stoakes) - "support batch checking of references and unmapping for large folios" implements batching to greatly improve the performance of reclaiming clean file-backed large folios (Baolin Wang) - "selftests/mm: add memory failure selftests" does as claimed (Miaohe Lin) * tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits) mm/page_alloc: clear page->private in free_pages_prepare() selftests/mm: add memory failure dirty pagecache test selftests/mm: add memory failure clean pagecache test selftests/mm: add memory failure anonymous page test mm: rmap: support batched unmapping for file large folios arm64: mm: implement the architecture-specific clear_flush_young_ptes() arm64: mm: support batch clearing of the young flag for large folios arm64: mm: factor out the address and ptep alignment into a new helper mm: rmap: support batched checks of the references for large folios tools/testing/vma: add VMA userland tests for VMA flag functions tools/testing/vma: separate out vma_internal.h into logical headers tools/testing/vma: separate VMA userland tests into separate files mm: make vm_area_desc utilise vma_flags_t only mm: update all remaining mmap_prepare users to use vma_flags_t mm: update shmem_[kernel]_file_*() functions to use vma_flags_t mm: update secretmem to use VMA flags on mmap_prepare mm: update hugetlbfs to use VMA flags on mmap_prepare mm: add basic VMA flag operation helper functions tools: bitmap: add missing bitmap_[subset(), andnot()] mm: add mk_vma_flags() bitmap flag macro helper ... |
||
|
|
284f1f176f |
netfilter pull request nf-26-02-17
-----BEGIN PGP SIGNATURE----- iQJdBAABCABHFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmmUlGEbFIAAAAAABAAO bWFudTIsMi41KzEuMTEsMiwyDRxmd0BzdHJsZW4uZGUACgkQcJGo2a1f9gAIYxAA 0AfkdXmCWMcHgWpMeW/K1R6SVxFpPLiXbvBSgQ7rUARARFQLTn7HkJGwpeq/slYp eAOnAF2e6j50dPJTAaa7hL4zMAuMe2a3zHPB03xg937FX/1wc/8kv73WCM7FkOSk yqOD/VhrbbW4Texc93wiYk+EZCjVyoQPb9wEbQkn6G1uUZddGeSllQLsYcs2/Vz0 o4vL6ouoxwIAud5Hqt63dV5IAwneCqp2g2Wg9QiwZK9oOf1l9QgN0axFXkn1z1pP I60zQwWQgalMeuQw3jiktvZF45hyUvf9tR4CHvaOlpkg0ExOOr3o6o70J1eq9WlR aIax9oRZC9N8EEel7AyFHD53E0ooI1T87kz05XLnB2Jb+vJ25smpTNLGOZMi68bD Sg6xywF3lUsHe0K1rdH+dXeY4VmN1oB8r8jxbxU15H9JiGGnO5/pVxxfq0kFhRHU Q1490qAX8Se+Pa+cj1nwBESTvAFH9jDZSbBQC6wc328l4kXOzQa+EKCrj+dae5q2 PNTG0xkvMMV3RKB15V2YZ9Ay3bA5Lf4iz8/E0pUHhCN8E/SADctfhZQLG0T3eg1K D3Ix1/iqeMDuq2t8A6uCq2bPrxKg8ijDsLWJ4ilCyirfRurlr3SrQAkMx6Tu7AnC XOYh5VBFrKywoWi/4kivXhQ1EengGUA9sev7WRC5yXo= =yncs -----END PGP SIGNATURE----- Merge tag 'nf-26-02-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter: updates for net The following patchset contains Netfilter fixes for *net*: 1) Add missing __rcu annotations to NAT helper hook pointers in Amanda, FTP, IRC, SNMP and TFTP helpers. From Sun Jian. 2-4): - Add global spinlock to serialize nft_counter fetch+reset operations. - Use atomic64_xchg() for nft_quota reset instead of read+subtract pattern. Note AI review detects a race in this change but it isn't new. The 'racing' bit only exists to prevent constant stream of 'quota expired' notifications. - Revert commit_mutex usage in nf_tables reset path, it caused circular lock dependency. All from Brian Witte. 5) Fix uninitialized l3num value in nf_conntrack_h323 helper. 6) Fix musl libc compatibility in netfilter_bridge.h UAPI header. This change isn't nice (UAPI headers should not include libc headers), but as-is musl builds may fail due to redefinition of struct ethhdr. 7) Fix protocol checksum validation in IPVS for IPv6 with extension headers, from Julian Anastasov. 8) Fix device reference leak in IPVS when netdev goes down. Also from Julian. 9) Remove WARN_ON_ONCE when accessing forward path array, this can trigger with sufficiently long forward paths. From Pablo Neira Ayuso. 10) Fix use-after-free in nf_tables_addchain() error path, from Inseo An. * tag 'nf-26-02-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fix use-after-free in nf_tables_addchain() net: remove WARN_ON_ONCE when accessing forward path array ipvs: do not keep dest_dst if dev is going down ipvs: skip ipv6 extension headers for csum checks include: uapi: netfilter_bridge.h: Cover for musl libc netfilter: nf_conntrack_h323: don't pass uninitialised l3num value netfilter: nf_tables: revert commit_mutex usage in reset path netfilter: nft_quota: use atomic64_xchg for reset netfilter: nft_counter: serialize reset with spinlock netfilter: annotate NAT helper hook pointers with __rcu ==================== Link: https://patch.msgid.link/20260217163233.31455-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
|
87b08913a9 |
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp_global_credit was meant to be changed ~1000 times per second,
but if an admin sets net.ipv4.icmp_msgs_per_sec to a very high value,
icmp_global_credit changes can inflict false sharing to surrounding
fields that are read mostly.
Move icmp_global_credit and icmp_global_stamp to a separate
cacheline aligned group.
Fixes:
|
||
|
|
8927a108a7 |
mshv: Add SMT_ENABLED_GUEST partition creation flag
Add support for HV_PARTITION_CREATION_FLAG_SMT_ENABLED_GUEST to allow userspace VMMs to enable SMT for guest partitions. Expose this via new MSHV_PT_BIT_SMT_ENABLED_GUEST flag in the UAPI. Without this flag, the hypervisor schedules guest VPs incorrectly, causing SMT unusable. Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
a284dbc96a |
mshv: Add nested virtualization creation flag
Introduce HV_PARTITION_CREATION_FLAG_NESTED_VIRTUALIZATION_CAPABLE to indicate support for nested virtualization during partition creation. This enables clearer configuration and capability checks for nested virtualization scenarios. Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
36d6cbb621 |
mshv: expose the scrub partition hypercall
This hypercall needs to be exposed for VMMs to soft-reboot guests. It will reset APIC and synthetic interrupt controller state, among others. Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
4bef6b28ba |
mshv: Add support for integrated scheduler
Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
|
c3c1e98533 |
More power management updates for 7.0-rc1
- Fix the handling of package-scope MSRs in the intel_rapl power
capping driver when called from the PMU subsystem and make it add all
package CPUs to the PMU cpumask to allow tools to read RAPL events
from any CPU in the package (Kuppuswamy Satharayananyan)
- Rework the invalid version check in the intel_rapl_tpmi power capping
driver to account for the fact that on partitioned systems, multiple
TPMI instances may exist per package, but RAPL registers are only
valid on one instance (Kuppuswamy Satharayananyan)
- Describe the new intel_idle.table command line option in the
admin-guide intel_idle documentation (Artem Bityutskiy)
- Fix a crash in the ladder cpuidle governor on systems with only one
(polling) idle state available by making the cpuidle core bypass the
governor in those cases and adjust the other existing governors to
that change (Aboorva Devarajan, Christian Loehle)
- Update kerneldoc comments for wake IRQ management functions that
have not been matching the code (Wang Jiayue)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmWDssSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1D5wH/j5drstZAsRqL4IwWPWBry0vhKGwr0vu
f8/sRuiAm/dRpi0Ro5XDiJbR4ZBLDp+4dDBOsR47Ss9a+B57iCftzmXcx5QBzUid
75W41IQ182Z/aGFQpU2kUPoRuNTUSmpUGVeon+SW4U24nCDaxOl4c2n8lWzgiznS
oJEN6Y9JfYV+fnLoxWmwyniR9USp2UFXS7tugDBMX1e1+sfrNbAUyuEKCs6R6u65
O7GTr2kA9lcM/hONBbXXpZNhtm23Jj0YS77lsELXoR9YWXTPJVTKVXmD11wrbWvE
quYefGoWCNcxQG3lYfw2vLdKMT3OYeRaq+DT3+9odaooHOJ6f4FqAzQ=
=cjJd
-----END PGP SIGNATURE-----
Merge tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the power management updates merged
recently in cpuidle governors, in the Intel RAPL power capping driver
and in the wake IRQ management code:
- Fix the handling of package-scope MSRs in the intel_rapl power
capping driver when called from the PMU subsystem and make it add
all package CPUs to the PMU cpumask to allow tools to read RAPL
events from any CPU in the package (Kuppuswamy Satharayananyan)
- Rework the invalid version check in the intel_rapl_tpmi power
capping driver to account for the fact that on partitioned systems,
multiple TPMI instances may exist per package, but RAPL registers
are only valid on one instance (Kuppuswamy Satharayananyan)
- Describe the new intel_idle.table command line option in the
admin-guide intel_idle documentation (Artem Bityutskiy)
- Fix a crash in the ladder cpuidle governor on systems with only one
(polling) idle state available by making the cpuidle core bypass
the governor in those cases and adjust the other existing governors
to that change (Aboorva Devarajan, Christian Loehle)
- Update kerneldoc comments for wake IRQ management functions that
have not been matching the code (Wang Jiayue)"
* tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Remove single state handling
cpuidle: teo: Remove single state handling
cpuidle: haltpoll: Remove single state handling
cpuidle: Skip governor when only one idle state is available
powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check
PM: sleep: wakeirq: Update outdated documentation comments
Documentation: PM: Document intel_idle.table command line option
powercap: intel_rapl: Expose all package CPUs in PMU cpumask
powercap: intel_rapl: Remove incorrect CPU check in PMU context
|
||
|
|
23b0f90ba8 |
Summary
* Removed macros from proc handler converters Replace the proc converter macros with "regular" functions. Though it is more verbose than the macro version, it helps when debugging and better aligns with coding-style.rst. * General cleanup Remove superfluous ctl_table forward declarations. Const qualify the memory_allocation_profiling_sysctl and loadpin_sysctl_table arrays. Add missing kernel doc to proc_dointvec_conv. * Testing This series was run through sysctl selftests/kunit test suite in x86_64. And went into linux-next after rc4, giving it a good 3 weeks of testing -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmmUabYACgkQupfNUreW QU8y2Qv/d2y35uQPRDh0HKWKWXJy41C2RJzd/rFCWJPCwo150whTSHIHkWYnu76g 10QblBXQmXi9TVqFnJ7Il7PWgqkMPjzA13tfT9eXNWU8j2OB/mcVKNl9X4wm/jWi QxtGmBsIQ/nxb2pUzMCykzgfc5mLi2NQ8qhZ5bOnq7UW3zdYmzEqx+tRdvIacyIk adComi5v8xUDqyEbVFaBovuX2WHQkPyBMnD64nwWG93JpNG/+9PxGzv/DNUXY11Y epVOfSoKdJbSLjYoHEPEhT0aHjSydq3QHru7uF6wzKOFTfHej/XkXXbUnFXPO2Pn c5J0u/HziYG5eN2QTqGfrhECZYuCFPemtUozltbcgGebkl1wKH+k9K5vsCaz/mhk ihUC3mui++W/n9B9HJRYh1XeEpk6C1pWERCOx27XFZ25fSek2YO6ZWkT0q+gceC0 t4+eIFSGJ3OzheJgHNK9XhTMWiQPmHyA6brXYGx4WeRvJFLpVddPF7k3Z89zIAu/ Fut7FGTH =0Z+I -----END PGP SIGNATURE----- Merge tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl updates from Joel Granados: - Remove macros from proc handler converters Replace the proc converter macros with "regular" functions. Though it is more verbose than the macro version, it helps when debugging and better aligns with coding-style.rst. - General cleanup Remove superfluous ctl_table forward declarations. Const qualify the memory_allocation_profiling_sysctl and loadpin_sysctl_table arrays. Add missing kernel doc to proc_dointvec_conv. - Testing This series was run through sysctl selftests/kunit test suite in x86_64. And went into linux-next after rc4, giving it a good 3 weeks of testing * tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions sysctl: Replace unidirectional INT converter macros with functions sysctl: Add kernel doc to proc_douintvec_conv sysctl: Replace UINT converter macros with functions sysctl: Add CONFIG_PROC_SYSCTL guards for converter macros sysctl: clarify proc_douintvec_minmax doc sysctl: Return -ENOSYS from proc_douintvec_conv when CONFIG_PROC_SYSCTL=n sysctl: Remove unused ctl_table forward declarations loadpin: Implement custom proc_handler for enforce alloc_tag: move memory_allocation_profiling_sysctls into .rodata sysctl: Add missing kernel-doc for proc_dointvec_conv |
||
|
|
693680b9ad |
fsverity: fix build error by adding fsverity_readahead() stub
hppa-linux-gcc 9.5.0 generates a call to fsverity_readahead() in
f2fs_readahead() when CONFIG_FS_VERITY=n, because it fails to do the
expected dead code elimination based on vi always being NULL. Fix the
build error by adding an inline stub for fsverity_readahead(). Since
it's just for opportunistic readahead, just make it a no-op.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602180838.pwICdY2r-lkp@intel.com/
Fixes:
|
||
|
|
5959495449 |
fsverity: remove fsverity_verify_page()
Now that fsverity_verify_page() has no callers, remove it. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20260218010630.7407-4-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
|
9e371b0ba7 |
ipv6: addrconf: reduce default temp_valid_lft to 2 days
This is a recommendation from RFC 8981 and it was intended to be changed
by commit
|
||
|
|
452a3eee22 |
ipv6: fix a race in ip6_sock_set_v6only()
It is unlikely that this function will be ever called
with isk->inet_num being not zero.
Perform the check on isk->inet_num inside the locked section
for complete safety.
Fixes:
|
||
|
|
b61d565166 |
drm/pagemap: pass pagemap_addr by reference
Passing a structure by value into a function is sometimes problematic,
for a number of reasons. Of of these is a warning from the 32-bit arm
compiler:
drivers/gpu/drm/drm_gpusvm.c: In function '__drm_gpusvm_unmap_pages':
drivers/gpu/drm/drm_gpusvm.c:1152:33: note: parameter passing for argument of type 'struct drm_pagemap_addr' changed in GCC 9.1
1152 | dpagemap->ops->device_unmap(dpagemap,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1153 | dev, *addr);
| ~~~~~~~~~~~
This particular problem is harmless since we are not mixing compiler versions
inside of the compiler. However, passing this by reference avoids the warning
along with providing slightly better calling conventions as it avoids an
extra copy on the stack.
Fixes:
|
||
|
|
87a367f1bf |
This adds support for the upcoming aes256k key type in CephX that is
based on Kerberos 5 and brings a bunch of assorted CephFS fixes from Ethan and Sam. One of Sam's patches in particular undoes a change in the fscrypt area that had an inadvertent side effect of making CephFS behave as if mounted with wsize=4096 and leading to the corresponding degradation in performance, especially for sequential writes. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmmUpbQTHGlkcnlvbW92 QGdtYWlsLmNvbQAKCRBKf944AhHziy+iB/9oWArHfGu/OLbmb+gQEikcGVmzr9r/ XE3Pcp6JQUMUf8mlOf18RdWn+ak509jQcnJDSyXzk+mHBOw/+VwPod3bZZGNHcYw RwaUAWh9r79Bm0FnUewfQguj2FFnW1X4SrBrGCqsl/yOXbzHAGvDVzsoditfSB+J 8NPYJeFOk6VpRx5Qie66t2wwUoI/VtGs++D9R0CWEy1EpROH/nRkcTk7KlnfSIV0 FWSItUmssxp7Gm67O12390PxC0ZfQ6ApPNl5UOVkL7kfjqYsQKY948qlsTFHHFiM M58fGysAfsfTCXuFWjnmTGhLubV2d9fdIN8OjYFaOjpXeJQ6WRAg8nbe =jx2K -----END PGP SIGNATURE----- Merge tag 'ceph-for-7.0-rc1' of https://github.com/ceph/ceph-client Pull ceph updates from Ilya Dryomov: "This adds support for the upcoming aes256k key type in CephX that is based on Kerberos 5 and brings a bunch of assorted CephFS fixes from Ethan and Sam. One of Sam's patches in particular undoes a change in the fscrypt area that had an inadvertent side effect of making CephFS behave as if mounted with wsize=4096 and leading to the corresponding degradation in performance, especially for sequential writes" * tag 'ceph-for-7.0-rc1' of https://github.com/ceph/ceph-client: ceph: assert loop invariants in ceph_writepages_start() ceph: remove error return from ceph_process_folio_batch() ceph: fix write storm on fscrypted files ceph: do not propagate page array emplacement errors as batch errors ceph: supply snapshot context in ceph_uninline_data() ceph: supply snapshot context in ceph_zero_partial_object() libceph: adapt ceph_x_challenge_blob hashing and msgr1 message signing libceph: add support for CEPH_CRYPTO_AES256KRB5 libceph: introduce ceph_crypto_key_prepare() libceph: generalize ceph_x_encrypt_offset() and ceph_x_encrypt_buflen() libceph: define and enforce CEPH_MAX_KEY_LEN |
||
|
|
e81dd54f62 |
dmaengine updates for v7.0
Core: - Add Frank Li as susbstem reviewer to help with reviews New Support: - Mediatek support for Dimensity 6300 and 9200 controller - Qualcomm Kaanapali and Glymur GPI DMA engine support - Synopsis DW AXI Agilex5 support - Renesas RZ/V2N SoC support - Atmel microchip lan9691-dma support - Tegra ADMA tegra264 support Updates: - sg_nents_for_dma() helper use in subsystem - pm_runtime_mark_last_busy() redundant call update for subsystem - Residue support for xilinx AXIDMA driver - Intel Max SGL Size Support and capabilities for DSA3.0 - AXI dma larger than 32bits address support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmmUkGgACgkQfBQHDyUj g0d6uRAAnVfM6GxVt4PuRd1t+i6qeNhqZrq+8001YtFgOJp0hxPX7k9PP1F42kjp 1zrICvvdqH8gw8+8AaT2JpIZp4vENmjGdnkCo+HU6FgGPCUmkkpehPk58Y2K3r0a LbHNjjj7V7SDGs9SzT2It+d7KfKnv1adushBhuO7xv524hwSuetw1q8CnLPoxaPx KNWToovCp5tlHCucWQAdmd4bPsUv1mFMvlJxK4a26WKeL7lU6BeDS06rLTNq5PNZ 51sYdSvyBOSCUcFGToeebJFsKCQukryZTXTtsKMsmLvmHaTMahu2TwNzQ+PRSBSr kZ9GpS51tet67txGzGzJRFGDY9quKFrajQ60Om6dr9aYm2xW7gEZFa0NKTlz9q7w kbwsPgd87sYI8MDWpinAuvwUS2OXnihjqdYVp0QouJd8eRiH1pWagtjubGRVYekC eEZjyxpz8ZD+LT2G3I0uy2FnqCkcEjSfchBCtuPcxSSSkHRXVf4tgUAI833YIdek gtd7h+/jepcVOcVAeaMVvVYnNIhVkHQkQC1/HmZCqNoyoY/oK8JcUF3UskzP7BPW gvEJhtFD0RBInu5UM0rS31zF+8Q9EMbDXKY2PiCCyxtsjAe5yWyeNNsUx9DN8ixv XyclsF7javUOZSoxzH3mCLy+x51p84Mq2KGQGL9H7PK/hWDMmoo= =nrcD -----END PGP SIGNATURE----- Merge tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Core: - Add Frank Li as susbstem reviewer to help with reviews New Support: - Mediatek support for Dimensity 6300 and 9200 controller - Qualcomm Kaanapali and Glymur GPI DMA engine - Synopsis DW AXI Agilex5 - Renesas RZ/V2N SoC - Atmel microchip lan9691-dma - Tegra ADMA tegra264 Updates: - sg_nents_for_dma() helper use in subsystem - pm_runtime_mark_last_busy() redundant call update for subsystem - Residue support for xilinx AXIDMA driver - Intel Max SGL Size Support and capabilities for DSA3.0 - AXI dma larger than 32bits address support" * tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits) dmaengine: add Frank Li as reviewer dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16 dmaengine: fsl-edma: don't explicitly disable clocks in .remove() dmaengine: xilinx: xdma: use sg_nents_for_dma() helper dmaengine: sh: use sg_nents_for_dma() helper dmaengine: sa11x0: use sg_nents_for_dma() helper dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper dmaengine: qcom: adm: use sg_nents_for_dma() helper dmaengine: pxa-dma: use sg_nents_for_dma() helper dmaengine: lgm: use sg_nents_for_dma() helper dmaengine: k3dma: use sg_nents_for_dma() helper dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper dmaengine: bcm2835-dma: use sg_nents_for_dma() helper dmaengine: axi-dmac: use sg_nents_for_dma() helper dmaengine: altera-msgdma: use sg_nents_for_dma() helper scatterlist: introduce sg_nents_for_dma() helper dmaengine: idxd: Add Max SGL Size Support for DSA3.0 dmaengine: idxd: Expose DSA3.0 capabilities through sysfs dmaengine: sh: rz-dmac: Make channel irq local dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081 ... |
||
|
|
9b725d5959 |
phy-for-7.0
- Core
- Add suuport for "rx-polarity" and "tx-polarity" device tree properties
and phy common properties to manage this
- New Support
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy support, USB
UNI PHY support and SMB2370 eUSB2 repeater support. SC8280xp QMP UFS PHY
support, Kaanapali PCIe phy and QMP PHY support, QCS615 QMP USB3+DP PHY
and driver support for that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver.
- TI TCAN1046 phy support.
- Renesas RZ/V2H(P) and RZ/V2N usb3 support
- Mediatek MT8188 hdmi-phy support
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY support
- Updates
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmmUivwACgkQfBQHDyUj
g0cbiQ/6A88WwlDoA/hh5NFN/5mkloHaVvcbYEraqvkzpdsWjCXOxQXfCBC5IVI+
BOn8GjjVEQMKLs8V7LXF/ZdGGJ+DI0TOod1GLrgKX/q8YL6XTxZ5DThWqSZrVRBI
SXY8/PFu6t12frVN7+f5l00m3/e/V1vdO1s1TBIzsrIt72RWI9vggjaLG9Gi0q3/
XBvgJFHV7/S5QIpn4+mL8b/r0CUshUnRX4VkIn5nRT+QUlZejs4RcuB322NF5Cva
ghFPLv5wrniZl6PGRsQyoEtPNS1mjJpnbKf0HqU/4BeaaVh+ylDu4ooXxH6w3E4v
vpk93MT3ZZXJWb1I6LkHJJnm5E5J8QRqhJXaeAoYXNsQZBx1L3CkpZG9DR2nO7V5
fv2eL/C2uDbPRovj4OT4BNAHXziqqjFTpS8se0U8MNG0qri0KmPJmP6MkSHM+pLg
USOsln+geUBsMkbqrDmy4RLPvP61qqid8RsPXxZoQpJiIrAL8WoT1JQ2DOh6NwqJ
IyPicLPihevXCvvLGm44HfYOHAcG+IGCD71vwOxnRkLFefc10Lg9FhnzHCKrnJvR
ELbx8ucu5+XRsL4mJa8DU6bi8DF4unzVpfBPvmguZtGS1noaDnsYGO5xTMeHZGMX
WASaH25iuEtXgLXfeeHvkxqPXP2oZHqVRT4rlIZ7O7ODU79Dshw=
=6ibD
-----END PGP SIGNATURE-----
Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
|
||
|
|
4e15e81971 |
soundwire updates for 7.0
- support for Qualcomm v2.2.0 controllers
- Bus method updates for .probe(), .remove() and .shutdown() and remove
function return value updates
- Avell B.ON dmi-quirks mapping
- Mark cs42l45 codec as wake capable
-----BEGIN PGP SIGNATURE-----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=BCe3
-----END PGP SIGNATURE-----
Merge tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
|
||
|
|
d295082ea6 |
SPDX updates for 7.0-rc1
Here are two small changes that add some missing SPDX license lines to some core kernel files. These are: - adding SPDX license lines to kdb files - adding SPDX license lines to the remaining kernel/ files Both of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZR2VA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yne8ACfYf6Mo8A+c4ZVduiKhAywn7wtX3YAn3Z29idk Cq3AiQM/bjJvM0/KPOwW =k232 -----END PGP SIGNATURE----- Merge tag 'spdx-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are two small changes that add some missing SPDX license lines to some core kernel files. These are: - adding SPDX license lines to kdb files - adding SPDX license lines to the remaining kernel/ files Both of these have been in linux-next for a while with no reported issues" * tag 'spdx-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: kernel: debug: Add SPDX license ids to kdb files kernel: add SPDX-License-Identifier lines |
||
|
|
17f8d20093 |
USB / Thunderbolt changes for 7.0-rc1
Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1. Overall more lines were removed than added, thanks to dropping the obsolete isp1362 USB host controller driver, always a nice change. Other than that, nothing major happening here, highlights are: - lots of dwc3 driver updates and new hardware support added - usb gadget function driver updates - usb phy driver updates - typec driver updates and additions - USB rust binding updates for syntax and formatting changes - more usb serial device ids added - other smaller USB core and driver updates and additions All of these have been in linux-next for a long time, with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZR0Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylcCgCfUyUFi0UOMPRyrU/fo5nyeWomgvsAnRst3nva y7BvYwC2L4FIP23snrTM =8S4Q -----END PGP SIGNATURE----- Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1. Overall more lines were removed than added, thanks to dropping the obsolete isp1362 USB host controller driver, always a nice change. Other than that, nothing major happening here, highlights are: - lots of dwc3 driver updates and new hardware support added - usb gadget function driver updates - usb phy driver updates - typec driver updates and additions - USB rust binding updates for syntax and formatting changes - more usb serial device ids added - other smaller USB core and driver updates and additions All of these have been in linux-next for a long time, with no reported problems" * tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits) usb: typec: ucsi: Add Thunderbolt alternate mode support usb: typec: hd3ss3220: Check if regulator needs to be switched usb: phy: tegra: parametrize PORTSC1 register offset usb: phy: tegra: parametrize HSIC PTS value usb: phy: tegra: return error value from utmi_wait_register usb: phy: tegra: cosmetic fixes dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support usb: dwc2: fix resume failure if dr_mode is host usb: cdns3: fix role switching during resume usb: dwc3: gadget: Move vbus draw to workqueue context USB: serial: option: add Telit FN920C04 RNDIS compositions usb: dwc3: Log dwc3 address in traces usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN usb: phy: tegra: add HSIC support usb: phy: tegra: use phy type directly usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi usb: typec: ucsi: Support mode selection to activate altmodes usb: typec: Introduce mode_selection bit usb: typec: Implement mode selection usb: typec: Expose alternate mode priority via sysfs ... |
||
|
|
3ad7945754 |
TTY / Serial driver updates for 7.0-rc1
Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor tweaks
and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZR1VQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfsACghiyMgr0XKVDFEpV7/fPzocKH+o0An3v8knSi
kLz/f6LstVsISqCxeT+9
=uozB
-----END PGP SIGNATURE-----
Merge tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
|
||
|
|
505d195b0f |
Char/Misc/IIO driver changes for 7.0-rc1
Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues except for a merge conflict with your tree due to the mhi driver changes in the drivers/net/wireless/ath/ath12k/mhi.c file. To fix that up, just delete the "auto_queue" structure fields being set, see this message for the full change needed: https://lore.kernel.org/r/aXD6X23btw8s-RZP@sirena.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZRxOg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykIrACgs9S+A/GG9X0Kvc+ND/J1XYZpj3QAoKl0yXGj SV1SR/giEBc7iKV6Dn6O =jbok -----END PGP SIGNATURE----- Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO driver updates from Greg KH: "Here is the big set of char/misc/iio and other smaller driver subsystem changes for 7.0-rc1. Lots of little things in here, including: - Loads of iio driver changes and updates and additions - gpib driver updates - interconnect driver updates - i3c driver updates - hwtracing (coresight and intel) driver updates - deletion of the obsolete mwave driver - binder driver updates (rust and c versions) - mhi driver updates (causing a merge conflict, see below) - mei driver updates - fsi driver updates - eeprom driver updates - lots of other small char and misc driver updates and cleanups All of these have been in linux-next for a while, with no reported issues" * tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits) mux: mmio: fix regmap leak on probe failure rust_binder: return p from rust_binder_transaction_target_node() drivers: android: binder: Update ARef imports from sync::aref rust_binder: fix needless borrow in context.rs iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT ... |