Commit graph

547,759 commits

Author SHA1 Message Date
Marc Kleine-Budde
10d089bd4b can: flexcan: replace open coded "mailbox code" by proper define
This patch replaces a open coded variant of a "mailbox code" definition by an
existing define, improves code readability.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-05-06 22:57:27 +02:00
Marc Kleine-Budde
6f75fce1ea can: flexcan: rename struct flexcan_regs::crl2 -> ctrl2
This is done to mach the abbreviationin of the register in the datasheets.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-05-06 22:57:27 +02:00
Marc Kleine-Budde
66a6ef0229 can: flexcan: add documentation about mailbox organization
This patch adds a short documentation snippet about the mailbox organization as
it's regularly not correct in freescale's datasheets.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-05-06 22:57:26 +02:00
David Jander
8a1ce7e8f7 can: flexcan: add MB/FIFO specific column to comment table of IP versions
Flexcan V10 and newer are able to receive RTR frames in a MB. Older versions
are not. Those should use flexcan in FIFO mode.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-05-06 22:57:26 +02:00
Kevin Cernekee
98fb1ffd81 UBI: block: Add missing cache flushes
Block drivers are responsible for calling flush_dcache_page() on each
BIO request. This operation keeps the I$ coherent with the D$ on
architectures that don't have hardware coherency support. Without this
flush, random crashes are seen when executing user programs from an ext4
filesystem backed by a ubiblock device.

This patch is based on the change implemented in commit 2d4dc890b5
("block: add helpers to run flush_dcache_page() against a bio and a
request's pages").

Fixes: 9d54c8a33e ("UBI: R/O block driver on top of UBI volumes")
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-05-06 22:52:22 +02:00
Sascha Hauer
c1c325d703 tty: serial: 8250_mtk: Add support for bus clock
The mtk 8250 needs two clocks, one for providing the baudrate and
one that needs to be enabled for register accesses. The latter has
not been supported, this patch adds support for it. It is optional
for now since not all SoCs provide a bus clock.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:03 +02:00
Sascha Hauer
68e5fc4a25 tty: serial: 8250_mtk: use pm_runtime callbacks for enabling
The pm_runtime callbacks already enable and disable the device.
Use them in probe() and remove() instead of duplicating the
code. This allows us to concentrate more code for enabling/disabling
the UART in a single place.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:02 +02:00
Sascha Hauer
a5fd844599 tty: serial: 8250_mtk: Use devm_clk_get
When a struct device * is present clk_get should be used rather
than of_clk_get. Use the devm variant of this function to be able to
drop the clk_put in the error and remove pathes. While at it fix
a wrong error message.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:02 +02:00
Sascha Hauer
59f89f21b5 tty: serial: 8250_mtk: remove unnecessary test
When the driver has probed successfully the clk pointer is always valid,
so no need to test for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:02 +02:00
Firo Yang
c547630f6b ARM: meson: serial: convert iounmap to devm_iounmap
The function meson_uart_release_port() inappropriately try to
iounmap() a resource managed by devm_ioremap_nocache().
The function meson_uart_release_port() maybe called by uart_ioctl()
that means meson_uart_release_port() is not called from within a
probe or remove function, for safety, I convert iounmap() to
devm_iounmap().

Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:02 +02:00
John Ogness
eda0cd3546 tty: serial: 8250: omap: synchronize rx_running
The rx_running flag should show if DMA is currently active. However
there is a window between when the flag is set/cleared and when
the DMA is started/stopped. Because the flag is queried from both
hard and soft irq contexts, the driver can make incorrect
decisions and do things like start a DMA transfer using a buffer
that is already setup to be used for a DMA transfer.

This patch adds a spinlock to synchronize the rx_running flag and
close the above mentioned window.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:01 +02:00
John Ogness
02ec6041a8 dmaenegine: edma: allow pause/resume for non-cyclic mode
The 8250_omap serial driver relies on dmaengine_pause() actually
pausing the DMA transfer. Before this patch dmaengine_pause() is
a NOP for non-cylic DMA transfers. This allowed the 8250_omap
driver to read DMA buffers while the DMA was still active,
resulting in lost serial data.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:01 +02:00
John Ogness
c2d4bb9d93 ARM: common: edma: clear completion interrupts on stop
When stopping a DMA transfer with interrupts disabled it is possible
that the DMA transfer completes before the events are cleared. In
this case the completion interrupt will be pending, causing a
completion callback after the transfer was stopped.

By clearing the completion interrupt for the stopping channel it is
ensured that no completion event will be generated after the stop.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:01 +02:00
Geert Uytterhoeven
35a0f950aa serial: SERIAL_IFX6X60 should depend on HAS_DMA
If NO_DMA=y:

    drivers/built-in.o: In function `ifx_spi_free_device':
    ifx6x60.c:(.text+0x96d9a): undefined reference to `dma_free_coherent'
    drivers/built-in.o: In function `ifx_spi_spi_probe':
    ifx6x60.c:(.text+0x978a2): undefined reference to `dma_alloc_coherent'

While DMA is optional in this driver, and is used only if
ifx_modem_platform_data.use_dma is set, there are currently no in-tree
users of ifx_modem_platform_data (and thus of this driver), so just make
it depend on HAS_DMA.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:01 +02:00
Geert Uytterhoeven
cbbcd1f3b8 serial: ifx6x60: Remove superfluous casts when calling request_irq()
There's no need to cast the last parameter of {request,free}_irq() to
"void *", as any pointer type is accepted.

Remove the superfluous casts to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:01 +02:00
Geert Uytterhoeven
9a499db032 serial: ifx6x60: Remove dangerous spi_driver casts
Casting spi_driver pointers to "void *" when calling
spi_{,un}register_driver() bypasses all type checking.

Remove the superfluous casts to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:01 +02:00
Qipan Li
adeede7319 serial: sirf: move from clk_get to devm_clk_get
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:00 +02:00
Qipan Li
4b8038dca0 Revert "serial: sirf: add a new uart type support"
This reverts commit 52bec4ed4e("serial: sirf: add a new uart type
support").
we misunderstood the clock dependency in atlas7. Actually involved
several clocks are in a tree structure. we still only need to take
the leaf clock node for BT uarts.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Barry.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:00 +02:00
Valentin Rothberg
507224aa88 serial: 8250: remove Kconfig indirection
Remove CONFIG_SERIAL_DETECT_IRQ and CONFIG_SERIAL_MANY_PORTS, and
substitute all references to the proper 8250 Kconfig options.  Now, the
actual Kconfig dependencies are not hidden when reading the code and
static analyzers are less confused.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:00 +02:00
Peter Hurley
6b3cddccf4 serial: core: Fix unused variable warnings from uart_console()
If CONFIG_SERIAL_CORE_CONSOLE=n, build warnings are generated by
uart_console() macro expansion:

drivers/tty/serial/of_serial.c: In function ‘of_serial_suspend_8250’:
drivers/tty/serial/of_serial.c:262:20: warning: unused variable ‘port’ [-Wunused-variable]
  struct uart_port *port = &port8250->port;
                    ^
drivers/tty/serial/of_serial.c: In function ‘of_serial_resume_8250’:
drivers/tty/serial/of_serial.c:272:20: warning: unused variable ‘port’ [-Wunused-variable]
  struct uart_port *port = &port8250->port;

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:00 +02:00
Valentin Rothberg
bbdfe620b9 drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE
Correct reference in C-comment after #endif.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:59 +02:00
Valentin Rothberg
60d0da5168 serial: bfin: ctsrts: enfore Kconfig naming convention
The CONFIG_ prefix is reserved for Kconfig options in Make and CPP
syntax; static analysis tools rely on this convention.  This patch
enforces this behavior for SERIAL_BFIN_{HARD_}CTSRTS.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:59 +02:00
Valentin Rothberg
5b84c967cc drivers/tty/serial/mpc52xx_uart.c: fix typo in C comment
Fix reference on PPC_MPC52xx in C comment after #endif.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:59 +02:00
Valentin Rothberg
47eb16f68b drivers/tty/serial/8250/8250_core.c: remove CONFIG_HUB6
This file local CPP identifier is not referenced anywhere else, so we
can safely remove it.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:58 +02:00
Leilei Zhao
d033e82db9 tty/serial: at91: handle IRQ status more safely
Handle the changed flag of IRQ status in interruption
instead of handling it in tasklet due to the tasklet
may be scheduled more than once in one interruption.
Otherwise, the changed status may be processed more
than once which will lead to unexpected result. And
seriously, kernel will crash.

Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:58 +02:00
Valentin Rothberg
74a76089d2 drivers/tty/serial/crisv10.c: rename CPP identifier CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
The 'CONFIG_' prefix is reserved for Kconfig options in Make and CPP
syntax only.  Remove this prefix from the self-defined CPP identifier to
apply to this convention and make static analysis tools happy.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:58 +02:00
Valentin Rothberg
f52e17e4a7 drivers/tty/serial/crisv10.c: remove dead #ifdef blocks
ETRAX_SERIAL_PROC_ENTRY is not defined in Kconfig.  The affected #ifdef
block has not been compiled for years, and the embedded macro, PROCSTAT,
ended up as a NOOP.  Hence, remove the block and all calls to PROCSTAT.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:58 +02:00
Valentin Rothberg
cc020ea404 drivers/tty/serial/crisv10.c: remove dead #ifdef blocks
ETRAX_RS485_{ON_PORT_G, LTC1387} are not defined in Kconfig.  The
affected #ifdef block have not been compiled for years, so remove them
entirely.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:58 +02:00
Valentin Rothberg
5a56abc77f drivers/tty/serial/crisv10.c: remove dead #ifdef block
ETRAX_EXTERN_PB6CLK_ENABLED is not defined in Kconfig.  The affected
 #ifdef block has not been compiled for years, so remove it entirely.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:58 +02:00
Valentin Rothberg
0656b1a9a5 drivers/tty/serial: altera: fix typos in #endif comments
Correct reference on CONFIG_SERIAL_ALTERA_{JTAG}UART_CONSOLE in
C-comment after #endif.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:58 +02:00
Valentin Rothberg
bb5f633ab8 drivers/tty/serial/sh-sci.h: remove dead reference on ARCH_SH7372
The Kconfig option ARCH_SH7372 has been removed by commit 59b89af1d5
("ARM: shmobile: sh7372: Remove Legacy C SoC code").  This patch removes
the last reference on this Kconfig option.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:57 +02:00
Joe Perches
cbc7f6bd8f serial: kgdb_nmi: Use bool function return values of true/false not 1/0
Use the normal return values for bool functions

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:57 +02:00
Rasmus Villemoes
429b474990 tty: remove buf parameter from tty_name()
tty_name no longer uses the buf parameter, so remove it along with all
the 64 byte stack buffers that used to be passed in.

Mostly generated by the coccinelle script

@depends on patch@
identifier buf;
constant C;
expression tty;
@@
- char buf[C];
  <+...
- tty_name(tty, buf)
+ tty_name(tty)
  ...+>

allmodconfig compiles, so I'm fairly confident the stack buffers
weren't used for other purposes as well.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:57 +02:00
Rasmus Villemoes
917162c936 tty: return tty->name directly from tty_name
All users of tty_name pass the return value (the provided buffer) to
some printf-like function. We can thus avoid the strcpy and, more
importantly, later remove the buf parameter completely, eliminating
the need for some 64 byte stack buffers.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:57 +02:00
Rasmus Villemoes
1d6b98774c tty: constify return type of tty_name
All users of tty_name pass the result directly to a printf-like
function. This means we can actually let tty_name return the literal
"NULL tty" or tty->name directly, avoiding the strcpy and a lot of
medium-sized stack buffers. In preparation for that, make the return
type const char*.

While at it, we can also constify the tty parameter.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:57 +02:00
Fabio Estevam
caec172d57 serial: imx: Remove return value from imx_setup_ufcr()
The return value from imx_setup_ufcr() is always 0 and its value is never
checked, so better to remove the return value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:57 +02:00
Jiada Wang
5379418322 serial: imx: protect Soft Reset of port with lock
Previously Soft Reset (clear of SRST bit in UCR2 register)
of UART in startup is not protected by lock, which may have race
with console_write, as console_write may occur at anytime even
when UART port is shutdown.

To avoid this race, protect Soft reset of UART port with spin_lock.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:56 +02:00
Dave Martin
1e84d22322 serial/amba-pl011: Refactor and simplify TX FIFO handling
Commit 734745c serial/amba-pl011: Activate TX IRQ passively
adds some complexity and overhead in the form of a softirq
mechanism for transmitting in the absence of interrupts.

This patch simplifies the code flow to reduce the reliance on
subtle behaviour and avoid fragility under future maintenance.

To this end, the TX softirq mechanism is removed and instead
pl011_start_tx() will now simply stuff the FIFO until full
(guaranteeing future TX IRQs), or until there are no more chars
to write (in which case we don't care whether an IRQ happens).

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:56 +02:00
Dave Martin
f28c1d0a78 Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
This reverts commit f2ee6dfa0e.

Jakub Kiciński observed that this patch can cause the pl011
driver to hang if if the only process with a pl011 port open is
killed by a signal, pl011_shutdown() can get called with an
arbitrary amount of data still in the FIFO.

Calling _shutdown() with the TX FIFO non-empty is questionable
behaviour and my itself be a bug.

Since the affected patch was speculative anyway, and brings limited
benefit, the simplest course is to remove the assumption that TXIS
will always be left asserted after the port is shut down.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:56 +02:00
Vinod Koul
83f125e2a1 ASoC: Intel: add support for configuring TDM slots for SSP
With this machines can now configure TDM settings for SSP port using
set_tdm_slot API

Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 19:50:22 +01:00
Vinod Koul
0b44e34549 ASoC: intel: add support for specifying PCM format
With this machines can configure the PCM format applied on SSP port using
the set_fmt API

Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 19:50:22 +01:00
Vinod Koul
711bc9476b ASoC: Intel: load hw_defaults in hw_params of ssp be
We have the SSP defaults now and we need to load then in hw_params callback
of BE SSP DAI ops.

Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 19:50:22 +01:00
Vinod Koul
5749d70edc ASoC: Intel: use local values for ssp configuration
So right now SSP configuration is statically coded in the driver. While we
would like to keep this configuration intact for the users who are using
these defaults, we need to provide a way for users to program it.
So create a local value in driver structure which is populate with default
value for now

Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 19:50:22 +01:00
Vinod Koul
1f2d86f1c0 ASoC: Intel: add frame and data polarity to ssp config
The current ssp configuration was not configuring the frame sync polarity
and data polarity. Some codecs do need these different so add them in ssp
configuration now

Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 19:50:22 +01:00
Qipan Li
96bf40194f spi: sirf: request and free cs gpio in setup and cleanup callbacks
move spi controller's gpio request work out from probe() to spi device
register stage, so after spi device register spi controller can deactive
device's gpio chipselect. old code can't do it because gpio request has
not be done until device register is finised in spi_bitbang_start.
and add cleanup function to free CS gpio.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 19:47:49 +01:00
Aravind Gopalakrishnan
7559e13fb4 x86/mce: Add support for deferred errors on AMD
Deferred errors indicate error conditions that were not corrected, but
those errors have not been consumed yet. They require no action from
S/W (or action is optional). These errors provide info about a latent
uncorrectable MCE that can occur when a poisoned data is consumed by the
processor.

Newer AMD processors can generate deferred errors and can be configured
to generate APIC interrupts on such events.

SUCCOR stands for S/W UnCorrectable error COntainment and Recovery.
It indicates support for data poisoning in HW and deferred error
interrupts.

Add new bitfield to mce_vendor_flags for this. We use this to verify
presence of deferred error interrupts before we enable them in mce_amd.c

While at it, clarify comments in mce_vendor_flags to provide an
indication of usages of the bitfields.

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1430913538-1415-4-git-send-email-Aravind.Gopalakrishnan@amd.com
[ beef up commit message, do CPUID(8000_0007) only once. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-05-06 20:34:31 +02:00
Linus Torvalds
3d54ac9e35 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "EFI fixes, and FPU fix, a ticket spinlock boundary condition fix and
  two build fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Always restore_xinit_state() when use_eager_cpu()
  x86: Make cpu_tss available to external modules
  efi: Fix error handling in add_sysfs_runtime_map_entry()
  x86/spinlocks: Fix regression in spinlock contention detection
  x86/mm: Clean up types in xlate_dev_mem_ptr()
  x86/efi: Store upper bits of command line buffer address in ext_cmd_line_ptr
  efivarfs: Ensure VariableName is NUL-terminated
2015-05-06 10:57:37 -07:00
Lars-Peter Clausen
a9843112b4 ASoC: omap-twl4030: Use card DAPM context to access widgets
Use the card DAPM context instead of the CODEC DAPM context since only card
level widgets are accessed here.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 18:53:58 +01:00
Aravind Gopalakrishnan
6e6e746e33 x86/mce/amd: Collect valid address before logging an error
amd_decode_mce() needs value in m->addr so it can report the error
address correctly. This should be setup in __log_error() before we call
mce_log(). We do this because the error address is an important bit of
information which should be conveyed to userspace.

The correct output then reports proper address, like this:

  [Hardware Error]: Corrected error, no action required.
  [Hardware Error]: CPU:0 (15:60:0) MC0_STATUS [-|CE|-|-|AddrV|-|-|CECC]: 0x840041000028017b
  [Hardware Error]: MC0 Error Address: 0x00001f808f0ff040

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1430913538-1415-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-05-06 19:49:31 +02:00
Bard Liao
ac4fc3eeb7 ASoC: rt5645: remove unused field in pdata
We can know if dmic is used by reading the value of dmic1_data_pin
and dmic2_data_pin. Also IRQ must be used if codec JD or button
detection function is used. So, dmic_en and en_jd_func can be remove
from platform data.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-06 18:49:20 +01:00