This adds the devices trees for IOT2050 Product Generation 2 (PG2)
boards. We have Basic and an Advanced variants again, differing in
number of cores, RAM size, availability of eMMC and further details.
The major difference to PG1 is the used silicon revision (SR2.x on
PG2).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/cc868da8264324bde2c87d0c01d4763e3678c706.1632657917.git.jan.kiszka@web.de
The current IOT2050 devices are Product Generation 1 (PG1), using SR1.0
AM65x silicon. Upcoming PG2 devices will use SR2.x SoCs and will
therefore need separate device trees. Prepare for that by factoring out
common bits that will be shared across both generations.
At this chance, drop a link to the product homepage to in the top-level
dts files. Also fix a typo in my email address in some headers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/31fece05f9728a852c0632985c4fa537cced4ece.1632657917.git.jan.kiszka@web.de
Analogously to the am654-base-board, configure the mailboxes for the two
R5F cores, add them and the already existing memory carve-outs to the
related MCU nodes. Allows to load applications under Linux onto the
cores, e.g. the RTI watchdog firmware.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1776f8be19b39a938d9248fcfc5332b753783c3e.1632657917.git.jan.kiszka@web.de
The IOT2050 devices described so far are using SR1.0 silicon, thus do
not have the additional PRUs of the ICSSG of the SR2.0. Disable them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/189a91866fb1af02e4fd2345dc56774aa069d5ba.1632657917.git.jan.kiszka@web.de
This ensures that the SD card will remain mmc0 across Basic and Advanced
devices, also avoiding surprises for users coming from the downstream
kernels.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/fe20d6346f119a28e47d129b616682001299cf0e.1632657917.git.jan.kiszka@web.de
Add j7200-evm compatible to the board to allow the board to distinguish
itself from other platforms that may be added in the future.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-5-nm@ti.com
Add j721e-evm compatible to the board to allow the board to distinguish
itself from other platforms that are pending to be added.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-4-nm@ti.com
Add compatibles for j721e and j7200 evms to allow for newer platforms
to distinguish themselves.
While doing this, maintain support for older style of description where
the board compatibility was not required.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210925201430.11678-2-nm@ti.com
Make sure that the platforms are grouped together per SoC. This helps
keep the Makefile readable as newer platforms get added to the list.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210915121442.27112-1-nm@ti.com
Add the DT nodes for the ICSSG0 and ICSSG1 processor subsystems that are
present on the K3 AM64x SoCs. The two ICSSGs are identical to each other
for the most part, with some of the peripheral pins from ICSSG1 not pinned
out. Each ICSSG instance is represented by a PRUSS subsystem node and other
child nodes.
The nodes are all added and enabled in the common k3-am64-main.dtsi
file by default. The MDIO nodes need pinctrl lines, and so should be
enabled only on boards where they are actually wired and pinned out
for ICSSG Ethernet. Any new board dts file should disable these if
they are not sure. These are disabled in the existing AM64x board dts
files to begin with.
The ICSSGs on K3 AM64x SoCs are very similar to the versions of the ICSSG
on K3 J721E and AM65x SR2.0 SoCs. The IRAM and BroadSize RAM sizes are all
identical to those on J721E SoCs. All The ICSSG host interrupts intended
towards the main Arm core are also shared with other processors on the SoC,
and can be partitioned as per system integration needs.
The ICSSG subsystem node contains the entire address space. The various
sub-modules of the ICSSG are represented as individual child nodes (so
platform devices themselves) of the PRUSS subsystem node. These include:
- two Programmable Real-Time Units (PRUs)
- two auxiliary PRU cores called RTUs
- two Transmit Programmable Real-Time Units (Tx_PRUs)
- Interrupt controller (INTC)
- a 'memories' node containing all the ICSSG level Data RAMs
- Real Time Media Independent Interface controller (MII_RT)
- Gigabit capable MII_G_RT
- ICSSG CFG sub-module providing two internal clock muxes, with the
default clock parents also assigned using the assigned-clock-parents
property.
The default names for the firmware images for each PRU, RTU and Tx_PRU
cores are defined as follows using the 'firmware-name' property (these
can be adjusted either in derivative board dts files or through sysfs at
runtime if required):
ICSSG0 PRU0 Core : am64x-pru0_0-fw ; PRU1 Core : am64x-pru0_1-fw
ICSSG0 RTU0 Core : am64x-rtu0_0-fw ; RTU1 Core : am64x-rtu0_1-fw
ICSSG0 Tx_PRU0 Core : am64x-txpru0_0-fw ; Tx_PRU1 Core : am64x-txpru0_1-fw
ICSSG1 PRU0 Core : am64x-pru1_0-fw ; PRU1 Core : am64x-pru1_1-fw
ICSSG1 RTU0 Core : am64x-rtu1_0-fw ; RTU1 Core : am64x-rtu1_1-fw
ICSSG1 Tx_PRU0 Core : am64x-txpru1_0-fw ; Tx_PRU1 Core : am64x-txpru1_1-fw
Note:
1. The ICSSG INTC on AM64x SoCs share all the host interrupts with other
processors, so use the 'ti,irqs-reserved' property in derivative board
dts files _if_ any of them should not be handled by the host OS.
2. There are few more sub-modules like the Industrial Ethernet Peripherals
(IEPs), eCAP, PWM, UART that do not have bindings and so will be added
in the future.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210919202935.15604-1-s-anna@ti.com
When the trace_pid_list was created, the default pid max was 32768.
Creating a bitmask that can hold one bit for all 32768 took up 4096 (one
page). Having a one page bitmask was not much of a problem, and that was
used for mapping pids. But today, systems are bigger and can run more
tasks, and now the default pid_max is usually set to 4194304. Which means
to handle that many pids requires 524288 bytes. Worse yet, the pid_max can
be set to 2^30 (1073741824 or 1G) which would take 134217728 (128M) of
memory to store this array.
Since the pid_list array is very sparsely populated, it is a huge waste of
memory to store all possible bits for each pid when most will not be set.
Instead, use a page table scheme to store the array, and allow this to
handle up to 30 bit pids.
The pid_mask will start out with 256 entries for the first 8 MSB bits.
This will cost 1K for 32 bit architectures and 2K for 64 bit. Each of
these will have a 256 array to store the next 8 bits of the pid (another
1 or 2K). These will hold an 2K byte bitmask (which will cover the LSB
14 bits or 16384 pids).
When the trace_pid_list is allocated, it will have the 1/2K upper bits
allocated, and then it will allocate a cache for the next upper chunks and
the lower chunks (default 6 of each). Then when a bit is "set", these
chunks will be pulled from the free list and added to the array. If the
free list gets down to a lever (default 2), it will trigger an irqwork
that will refill the cache back up.
On clearing a bit, if the clear causes the bitmask to be zero, that chunk
will then be placed back into the free cache for later use, keeping the
need to allocate more down to a minimum.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Commit 04647773d6 ("dt-bindings: input: Convert ChipOne ICN8318
binding to a schema") converts chipone_icn8318.txt to chipone,icn8318.yaml,
but missed to adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
a broken reference.
Repair this file reference in CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211005075451.29691-12-lukas.bulwahn@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Remove two symbols referenced in Kconfig which have been removed
previously by:
ef3c67b645 ("mfd: intel_msic: Remove driver for deprecated platform")
1b79fc4f2b ("x86/apb_timer: Remove driver for deprecated platform")
Detected by scripts/checkkconfigsymbols.py.
[ bp: Merge into a single patch. ]
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210803113531.30720-5-lukas.bulwahn@gmail.com
The "digi_port" pointer can't be NULL and we have already dereferenced
it so checking for NULL is not necessary. Delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004103737.GC25015@kili
Rebooting xtensa images loaded with the '-kernel' option in qemu does
not work. When executing a reboot command, the qemu session either hangs
or experiences an endless sequence of error messages.
Kernel panic - not syncing: Unrecoverable error in exception handler
Reset code jumps to the CPU restart address, but Linux can not recover
from there because code and data in the kernel init sections have been
discarded and overwritten at this point.
XTFPGA platforms have a means to reset the CPU by writing 0xdead into a
specific FPGA IO address. When used in QEMU the kernel image loaded with
the '-kernel' option gets restored to its original state allowing the
machine to boot successfully.
Use that mechanism to attempt a platform reset. If it does not work,
fall back to the existing mechanism.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF
is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not
selected but CONFIG_OF is.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The section structure already contains sh_size, so just remove the extra
'len' member that requires extra mirroring and potential confusion.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210822225037.54620-3-joe.lawrence@redhat.com
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Commit e31694e0a7 ("objtool: Don't make .altinstructions writable")
aligned objtool-created and kernel-created .altinstructions section
flags, but there remains a minor discrepency in their use of a section
entry size: objtool sets one while the kernel build does not.
While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small
deviation can cause failures with external tooling (kpatch-build).
Fix this by creating new .altinstructions sections with sh_entsize of 0
and then later updating sec->sh_size as alternatives are added to the
section. An added benefit is avoiding the data descriptor and buffer
created by elf_create_section(), but previously unused by
elf_add_alternative().
Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210822225037.54620-2-joe.lawrence@redhat.com
Cc: Andy Lavr <andy.lavr@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Converting a special section's relocation reference to a symbol is
straightforward. No need for objtool to complain that it doesn't know
how to handle it. Just handle it.
This fixes the following warning:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
Fixes: 24ff652573 ("objtool: Teach get_alt_entry() about more relocation types")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/feadbc3dfb3440d973580fad8d3db873cbfe1694.1633367242.git.jpoimboe@redhat.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-kernel@vger.kernel.org
Mark's fix adds a MODULE_DEVICE_TABLE to ensure module autoloading
works for the Lattice ice-40-spi FPGA Manager driver.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIUEABYIAC0WIQSdhnt2PwibB65UG0C3mJX/Vsn7uQUCYVyXBQ8cbWRmQGtlcm5l
bC5vcmcACgkQt5iV/1bJ+7lLHgD+IMeyAxiah+UjtqaqV6Ndn0T1GAGeZwbt4kyL
hRC7DoUBAP+R8J4Y0A2dngCs96XKMoankCKrVLaDVLNUrv6/CBoM
=7feO
-----END PGP SIGNATURE-----
Merge tag 'fpga-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager fixes for 5.15
Mark's fix adds a MODULE_DEVICE_TABLE to ensure module autoloading
works for the Lattice ice-40-spi FPGA Manager driver.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: ice40-spi: Add SPI device ID table
The Topdown metrics events were added as 'perf stat' default events
since commit 42641d6f4d ("perf stat: Add Topdown metrics events as
default events").
However, the perf attr tests were not updated
accordingly.
The perf attr test fails on the platform which supports Topdown metrics.
# perf test 17
17: Setup struct perf_event_attr :FAILED!
Add Topdown metrics events into perf attr test cases. Make them optional
since they are only available on newer platforms.
Fixes: 42641d6f4d ("perf stat: Add Topdown metrics events as default events")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/1633031566-176517-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAmFcDYUACgkQ+7dXa6fL
C2uVYA/9H4dNBL20cHC+SyPMy7FGdBzaW/d/ahzHw2GO1JipDmofZLqeshOXR/Va
E3VcHb+RzpZNCjYflFD44mWiIYLhqGtDstbcSn/Eqlij4Mmtq4cj7AbYV753gRnX
OItms9dez6IEkCjE3gMpHE9VPWtFv/48qzuMY2X9lyBFnYVSdHyBwr3Dk/wHfieP
w07DBKptv2mrMV1mz9ghCU0VlgrjJcxJBzHaFHxIg3e/cVXVGpbH5ZWmh7OIJkC2
ae7tKvQSDEwZHSO0cQiNKlyVt5v3iNBY7C3IjWFunbPvaBTiq8DpRXOx6vsPVeOI
K+8+HwKdi1attN7KCjatYJLgiLkzOWr9H1rQHTDsa0QRfOwPR9KOA1arm9mnrcMP
I7SZ7oKZ6SasKe5GrbP3IBdWmDxSUUXgzZmapr+eh0cwF9gVRp+rivlokBdmE01c
aneG3FlGGIk+KRJl371XsAd3VlZguk66/r3GOLpor7+Z0DcXfvvpx5bJmmQCMvyW
UjSFarn+FQwbk//29sXRGyYRjx7Nf7LjE7yu9Mq3s97SQpvZd8Z1WI9LTibUd6nd
eC1eDqtaf6bEG5VFDFwfgCww7zGsWqES7HaaoaRRTQoiMog52GIDxiEYTepoGKto
ufiLNYd8AAOQ4z+5aRwbq2bUbld2KI0TN3X8/7dlEP5xKFf4TN4=
=kSrV
-----END PGP SIGNATURE-----
Merge tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc fs warning fixes from David Howells:
"The first four patches fix kerneldoc warnings in fscache, afs, 9p and
nfs - they're mostly just comment changes, though there's one place in
9p where a comment got detached from the function it was attached to
(v9fs_fid_add) and has to switch places with a function that got
inserted between (__add_fid).
The patch on the end removes an unused symbol in fscache"
* tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Remove an unused static variable
fscache: Fix some kerneldoc warnings shown up by W=1
9p: Fix a bunch of kerneldoc warnings shown up by W=1
afs: Fix kerneldoc warning shown up by W=1
nfs: Fix kerneldoc warning shown up by W=1
Picking the changes from:
09d2317440 ("ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION")
Which entails no changes in the tooling side as it doesn't introduce new
SNDRV_PCM_IOCTL_ ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are a couple of subtle error path bugs related to mapping the sgls:
- In rdma_rw_ctx_init(), dma_unmap would be called with an sg that could
have been incremented from the original call, as well as an nents that
is the dma mapped entries not the original number of nents called when
mapped.
- Similarly in rdma_rw_ctx_signature_init, both sg and prot_sg were
unmapped with the incorrect number of nents.
To fix this, switch to the sgtable interface for mapping which
conveniently stores the original nents for unmapping. This will get
cleaned up further once the dma mapping interface supports P2PDMA and
pci_p2pdma_map_sg() can be removed.
Fixes: 0e353e34e1 ("IB/core: add RW API support for signature MRs")
Fixes: a060b5629a ("IB/core: generic RDMA READ/WRITE API")
Link: https://lore.kernel.org/r/20211001213215.3761-1-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Filter out -static flag when building plugins as they are always built
as dynamic libraries and -static and -dynamic don't work well together
on arm and arm64.
Signed-off-by: Branislav Rankov <branislav.rankov@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Brown <Mark.Brown@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: nd@arm.com
Link: https://lore.kernel.org/r/e88952b3-2470-da96-dee9-e247a1759cd0@arm.com
Signed-off-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -lstdc++ to perf when linking libopencsd as it is a dependency. It
does not hurt to add it when dynamic linking.
Signed-off-by: Branislav Rankov <branislav.rankov@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Brown <Mark.Brown@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: nd@arm.com
Link: https://lore.kernel.org/r/e88952b3-2470-da96-dee9-e247a1759cd0@arm.com
Signed-off-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The compiler reports that free_sys_event_tables() is dead code.
But according to the semantics, the "LIST_HEAD(sys_event_tables)" should
also be released, just like we do with 'arch_std_events' in main().
Fixes: e9d32c1bf0 ("perf vendor events: Add support for arch standard events")
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210928102938.69681-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check whether PMC is ready before proceeding with the cpuidle registration.
This fixes racing with the PMC driver probe order, which results in a
disabled deepest CC6 idling state if cpuidle driver is probed before the
PMC.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Fixes: c9a6b82f45 ("drm/amdgpu: Implement DPC recovery")
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen.
Fixes: c9a6b82f45 ("drm/amdgpu: Implement DPC recovery")
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure that we notice this in error reports.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 728e7e0cd6.
Further discussion reveals that this feature is severely broken
and needs to be reverted ASAP.
GPU reset can never be delayed by userspace even for debugging or
otherwise we can run into in kernel deadlocks.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found an issue within cgroup_attach_task_all() fn which seem
to exclude cgrp_dfl_root (cgroupv2) while attaching tasks to
the given cgroup. This was noticed when the system was running
qemu/kvm with kernel vhost helper threads. It appears that the
vhost layer which uses cgroup_attach_task_all() fn to assign the
vhost kthread to the right qemu cgroup works fine with cgroupv1
based configuration but not in cgroupv2. With cgroupv2, the vhost
helper thread ends up just belonging to the root cgroup as is
shown below:
$ stat -fc %T /sys/fs/cgroup/
cgroup2fs
$ sudo pgrep qemu
1916421
$ ps -eL | grep 1916421
1916421 1916421 ? 00:00:01 qemu-system-x86
1916421 1916431 ? 00:00:00 call_rcu
1916421 1916435 ? 00:00:00 IO mon_iothread
1916421 1916436 ? 00:00:34 CPU 0/KVM
1916421 1916439 ? 00:00:00 SPICE Worker
1916421 1916440 ? 00:00:00 vnc_worker
1916433 1916433 ? 00:00:00 vhost-1916421
1916437 1916437 ? 00:00:00 kvm-pit/1916421
$ cat /proc/1916421/cgroup
0::/machine.slice/machine-qemu\x2d18\x2dDroplet\x2d7572850.scope/emulator
$ cat /proc/1916439/cgroup
0::/machine.slice/machine-qemu\x2d18\x2dDroplet\x2d7572850.scope/emulator
$ cat /proc/1916433/cgroup
0::/
From above, it can be seen that the vhost kthread (PID: 1916433)
doesn't seem to belong the qemu cgroup like other qemu PIDs.
After applying this patch:
$ pgrep qemu
1643
$ ps -eL | grep 1643
1643 1643 ? 00:00:00 qemu-system-x86
1643 1645 ? 00:00:00 call_rcu
1643 1648 ? 00:00:00 IO mon_iothread
1643 1649 ? 00:00:00 CPU 0/KVM
1643 1652 ? 00:00:00 SPICE Worker
1643 1653 ? 00:00:00 vnc_worker
1647 1647 ? 00:00:00 vhost-1643
1651 1651 ? 00:00:00 kvm-pit/1643
$ cat /proc/1647/cgroup
0::/machine.slice/machine-qemu\x2d18\x2dDroplet\x2d7572850.scope/emulator
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work
with fw_devlink. So, always compile it in for CONFIG_OF and delete the
config since it's no longer necessary.
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fw_devlink could end up creating device links for bus only devices.
However, bus only devices don't get probed and can block probe() or
sync_state() [1] call backs of other devices. To avoid this, probe these
devices using the simple-pm-bus driver.
However, there are instances of devices that are not simple buses (they get
probed by their specific drivers) that also list the "simple-bus" (or other
bus only compatible strings) in their compatible property to automatically
populate their child devices. We still want these devices to get probed by
their specific drivers. So, we make sure this driver only probes devices
that are only buses.
[1] - https://lore.kernel.org/lkml/CAPDyKFo9Bxremkb1dDrr4OcXSpE0keVze94Cm=zrkOVxHHxBmQ@mail.gmail.com/
Fixes: c442a0d187 ("driver core: Set fw_devlink to "permissive" behavior by default")
Cc: stable <stable@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Tested-by: Saravana Kannan <saravanak@google.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929000735.585237-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SYNC_STATE_ONLY device links intentionally allow cycles because cyclic
sync_state() dependencies are valid and necessary.
However a SYNC_STATE_ONLY device link where the consumer and the supplier
are the same device is pointless because the device link would be deleted
as soon as the device probes (because it's also the consumer) and won't
affect when the sync_state() callback is called. It's a waste of CPU cycles
and memory to create this device link. So reject any attempts to create
such a device link.
Fixes: 05ef983e0d ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Cc: stable <stable@vger.kernel.org>
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210929190549.860541-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>