Errata SKX37 is word-for-word identical to the other errata listed in
this workaround. I happened to notice this after investigating a CMCI
storm on a Skylake host. While I can't confirm this was the root cause,
spurious corrected errors does sound like a likely suspect.
Fixes: 2976908e41 ("x86/mce: Do not log spurious corrected mce errors")
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211029205759.GA7385@codemonkey.org.uk
Second round of updates for libata for 5.16:
* Fix READ LOG EXT and READ LOG DMA EXT command timeouts during disk
revalidation after a resume or a modprobe of the LLDD (from me).
* Remove unnecessary error message in sata_highbank driver (from Xu).
* Better handling of accesses to the IDENTIFY DEVICE data log for drives
that do not support this log page (from me).
* Fix ahci_shost_attr_group declaration in ahci driver (from me).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYY2zZQAKCRDdoc3SxdoY
dtNPAQCJ0hcF/CpDOgL2Aaw4GmANrWLxmjkKRCf3zn+Ufu4AJQD/eCWCUDZbJJbZ
JbGOY68y+pfU2peiO+CE/apFCsb+1wQ=
=WgCT
-----END PGP SIGNATURE-----
Merge tag 'libata-5.16-rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull more libata updates from Damien Le Moal:
"Second round of updates for libata for 5.16:
- Fix READ LOG EXT and READ LOG DMA EXT command timeouts during disk
revalidation after a resume or a modprobe of the LLDD (me)
- Remove unnecessary error message in sata_highbank driver (Xu)
- Better handling of accesses to the IDENTIFY DEVICE data log for
drives that do not support this log page (me)
- Fix ahci_shost_attr_group declaration in ahci driver (me)"
* tag 'libata-5.16-rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
libata: libahci: declare ahci_shost_attr_group as static
libata: add horkage for missing Identify Device log
ata: sata_highbank: Remove unnecessary print function dev_err()
libata: fix read log timeout value
We were calling cifs_fscache_get_super_cookie after tcon but before
we queried the info (QFS_Info) we need to initialize the cookie
properly. Also includes an additional check suggested by Paulo
to make sure we don't initialize super cookie twice.
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
TL;DR: While a tool like liblockdep is useful, it probably doesn't
belong within the kernel tree.
liblockdep attempts to reuse kernel code both directly (by directly
building the kernel's lockdep code) as well as indirectly (by using
sanitized headers). This makes liblockdep an integral part of the
kernel.
It also makes liblockdep quite unique: while other userspace code might
use sanitized headers, it generally doesn't attempt to use kernel code
directly which means that changes on the kernel side of things don't
affect (and break) it directly.
All our workflows and tooling around liblockdep don't support this
uniqueness. Changes that go into the kernel code aren't validated to not
break in-tree userspace code.
liblockdep ended up being very fragile, breaking over and over, to the
point that living in the same tree as the lockdep code lost most of it's
value.
liblockdep should continue living in an external tree, syncing with
the kernel often, in a controllable way.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that share and prefix variables are set to NULL after kfree()
when looping through DFS targets in __tree_connect_dfs_target().
Also, get rid of @ref in __tree_connect_dfs_target() and just pass a
boolean to indicate whether we're handling link targets or not.
Fixes: c88f7dcd6d ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although unlikely for it to be possible for rsp to be null here,
the check is safer to add, and quiets a Coverity warning.
Addresses-Coverity: 1437501 ("Explicit Null dereference")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In dequeue_mid we can log an error while holding a spinlock,
GlobalMid_Lock. Coverity notes that the error logging
also grabs a lock so it is cleaner (and a bit safer) to
release the GlobalMid_Lock before logging the warning.
Addresses-Coverity: 1507573 ("Thread deadlock")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit aeb58c860d ("thermal/drivers/int340x: processor_thermal: Suppot
64 bit RFIM responses") started using 'readq()' to read 64-bit status
responses from the int340x hardware.
That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is
ambiguous, since it's no longer an atomic access. Some hardware might
require 64-bit accesses, and other hardware might want low word first or
high word first.
It's quite likely that the driver isn't relevant in a 32-bit environment
any more, and there's a patch floating around to just make it depend on
X86_64, but let's make it buildable on x86-32 anyway.
The driver previously just read the low 32 bits, so the hardware
certainly is ok with 32-bit reads, and in a little-endian environment
the low word first model is the natural one.
So just add the include for the 'io-64-nonatomic-lo-hi.h' version.
Fixes: aeb58c860d ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6098475d4c ("spi: Fix deadlock when adding SPI controllers on
SPI buses") introduced a per-controller mutex. But mutex_unlock() of
said lock is called after the controller is already freed:
spi_unregister_controller(ctlr)
-> put_device(&ctlr->dev)
-> spi_controller_release(dev)
-> mutex_unlock(&ctrl->add_lock)
Move the put_device() after the mutex_unlock().
Fixes: 6098475d4c ("spi: Fix deadlock when adding SPI controllers on SPI buses")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.15
Link: https://lore.kernel.org/r/20211111083713.3335171-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
This code has several issues:
1) It passes IS_ERR() to dev_err_probe() instead of PTR_ERR().
2) It always prints an error message, even when it succeeds.
3) The "if (ret < 0) {" conditions are never true.
4) If requesting "mas->tx" fails then it sets "mas->rx" to NULL but the
intention was to set "mas->tx" to NULL.
Fixes: b59c122484 ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211110073935.GA5176@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print error messages with error code -517. Silences the following
errors upon on imx8qm:
fsl_lpspi 5a000000.spi: spi_register_controller error: -517
fsl_lpspi 5a010000.spi: spi_register_controller error: -517
fsl_lpspi 5a020000.spi: spi_register_controller error: -517
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211108145523.1797609-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some versions of the Cadence QSPI controller does not have the write
completion register implemented(CQSPI_REG_WR_COMPLETION_CTRL). On the
Intel SoCFPGA platform the CQSPI_REG_WR_COMPLETION_CTRL register is
not configured.
Add a quirk to not write to the CQSPI_REG_WR_COMPLETION_CTRL register.
Fixes: 9cb2ff1117 ("spi: cadence-quadspi: Disable Auto-HW polling)
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211108200854.3616121-1-dinguyen@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When registering the mt8173-afe-pcm driver, we are also adding two
components: one is for the PCM DAIs and one is for the HDMI DAIs, but
when debugfs is enabled, we're getting the following issue:
[ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
[ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
To overcome to that without any potentially big rewrite of this driver,
similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to
the components before actually adding them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes, end-users change the jack type under suspending,
so it needs to re-detect the combo jack type after resuming to
avoid any unexpected behaviors.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system suspends, the codec driver will set SAR to
power saving mode if a headset is plugged in.
There is a chance to generate an unexpected IRQ, and leads to
issues after resuming such as noise from OMTP type headsets.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific
for some platforms, the default setting for 'I2S Reference' does nothing,
only some SoC platform need to configure it.
Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of
RT1011_TDM1_SET_1 register, which isn't enough for specific platform.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20211111091705.20879-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update internal ocp level to correct value.
Even the wrong ocp setting can also make the sound output, but the power
cannot match the IC capability.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1636515921-31694-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch reverts two prior patches, e7310c9402
("security: implement sctp_assoc_established hook in selinux") and
7c2ef0240e ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.
Signed-off-by: Paul Moore <paul@paul-moore.com>
submit_bio_checks() may update bio->bi_opf, so we have to initialize
blk_mq_alloc_data.cmd_flags with bio->bi_opf after submit_bio_checks()
returns when allocating new request.
In case of using cached request, fallback to allocate new request if
cached rq isn't compatible with the incoming bio, otherwise change
rq->cmd_flags with incoming bio->bi_opf.
Fixes: 900e080752 ("block: move queue enter logic into blk_mq_submit_bio()")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Although unlikely to be possible for rsp to be null here,
the check is safer to add, and quiets a Coverity warning.
Addresses-Coverity: 1420428 ("Explicit null dereferenced")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although unlikely to be possible for rsp to be null here,
the check is safer to add, and quiets a Coverity warning.
Addresses-Coverity: 1418458 ("Explicit null dereferenced")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since 0412841812 ("of/irq: Allow matching of an interrupt-map local
to an interrupt controller"), the irq code favors using an interrupt-map
over a interrupt-controller property if both are available, while the
earlier behaviour was to ignore the interrupt-map altogether.
However, we now end-up with the opposite behaviour, which is to
ignore the interrupt-controller property even if the interrupt-map
fails to match its input. This new behaviour breaks the AmigaOne
X1000 machine, which ships with an extremely "creative" (read:
broken) device tree.
Fix this by allowing the interrupt-controller property to be selected
when interrupt-map fails to match anything.
Fixes: 0412841812 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/78308692-02e6-9544-4035-3171a8e1e6d4@xenosoft.de
Link: https://lore.kernel.org/r/20211112143644.434995-1-maz@kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
When using "devm_request_threaded_irq(,,,,IRQF_ONESHOT,,)" in a driver,
only the first interrupt is handled, and following interrupts are never
delivered (initially reported in [1]).
That's because the RISC-V PLIC cannot EOI masked interrupts, as explained
in the description of Interrupt Completion in the PLIC spec [2]:
<quote>
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored.
</quote>
Re-enable the interrupt before completion if it has been masked during
the handling, and remask it afterwards.
[1] http://lists.infradead.org/pipermail/linux-riscv/2021-July/007441.html
[2] 8bc15a35d0/riscv-plic.adoc
Fixes: bb0fed1c60 ("irqchip/sifive-plic: Switch to fasteoi flow")
Reported-by: Vincent Pelletier <plr.vincent@gmail.com>
Tested-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[maz: amended commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211105094748.3894453-1-guoren@kernel.org
The mask/unmask must be implemented, and enable/disable supplement
them if the HW requires something different at startup time. When
irq source is disabled by mask, mpintc could complete irq normally.
So drop enable/disable if favour of mask/unmask.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211101134534.3804542-1-guoren@kernel.org
Introduction of map_uid made two lookups from outer map to be distinct.
That distinction is only necessary when inner map has an embedded timer.
Otherwise it will make the verifier state pruning to be conservative
which will cause complex programs to hit 1M insn_processed limit.
Tighten map_uid logic to apply to inner maps with timers only.
Fixes: 3e8ce29850 ("bpf: Prevent pointer mismatch in bpf_timer_init.")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211110172556.20754-1-alexei.starovoitov@gmail.com
Fix a crash in the buffer pool allocator when a buffer is double
freed. It is possible to trigger this behavior not only from a faulty
driver, but also from user space like this: Create a zero-copy AF_XDP
socket. Load an XDP program that will issue XDP_DROP for all
packets. Put the same umem buffer into the fill ring multiple times,
then bind the socket and send some traffic. This will crash the kernel
as the XDP_DROP action triggers one call to xsk_buff_free()/xp_free()
for every packet dropped. Each call will add the corresponding buffer
entry to the free_list and increase the free_list_cnt. Some entries
will have been added multiple times due to the same buffer being
freed. The buffer allocation code will then traverse this broken list
and since the same buffer is in the list multiple times, it will try
to delete the same buffer twice from the list leading to a crash.
The fix for this is just to test that the buffer has not been added
before in xp_free(). If it has been, just return from the function and
do not put it in the free_list a second time.
Note that this bug was not present in the code before the commit
referenced in the Fixes tag. That code used one list entry per
allocated buffer, so multiple frees did not have any side effects. But
the commit below optimized the usage of the pool and only uses a
single entry per buffer in the umem, meaning that multiple
allocations/frees of the same buffer will also only use one entry,
thus leading to the problem.
Fixes: 47e4075df3 ("xsk: Batched buffer allocation for the pool")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20211111075707.21922-1-magnus.karlsson@gmail.com
Add a macro to simplify later refactoring. No functional change.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently tests are setup in builtin-test with function pointers. Kunit
exposes tests as a kunit_suite with a null terminated array of test
cases. Use a macro to aid transition from one to the other in later
changes.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211104064208.3156807-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SOL_SOCKET has a different value according to the architecture, some
have it as 0xffff while all the others have it as 1, so a simple string
array isn't usable, add a scnprintf routine that treats it as a special
case, using the array for other values.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move from ternary like expression to an if block, this way we'll
have just the extra lines for new files in the following patches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paving the way to pass more headers to be consumed, like
tools/perf/trace/beauty/include/linux/socket.h in addition to the
current tools/include/uapi/linux/in.h, to get the SOL_* defines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid having to add new entries to tools/perf/Makefile.perf prep
socket.sh so that it can generate other socket table generators, such as
the upcoming SOL_ socket level one.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The script that generates the tables was named 'socket.sh', which is
confusing, rename it to sockaddr.sh and make sure the related
Makefile.perf targets also use the 'sockaddr' namespace.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like
tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:
cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.
The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.
The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.
This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419
Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Cc: Matthias Klose <doko@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.
Cc: <stable@vger.kernel.org>
Fixes: b089c31c51 ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
KASAN reports a use-after-free report when doing block test:
==================================================================
[10050.967049] BUG: KASAN: use-after-free in
submit_bio_checks+0x1539/0x1550
[10050.977638] Call Trace:
[10050.978190] dump_stack+0x9b/0xce
[10050.979674] print_address_description.constprop.6+0x3e/0x60
[10050.983510] kasan_report.cold.9+0x22/0x3a
[10050.986089] submit_bio_checks+0x1539/0x1550
[10050.989576] submit_bio_noacct+0x83/0xc80
[10050.993714] submit_bio+0xa7/0x330
[10050.994435] mpage_readahead+0x380/0x500
[10050.998009] read_pages+0x1c1/0xbf0
[10051.002057] page_cache_ra_unbounded+0x4c2/0x6f0
[10051.007413] do_page_cache_ra+0xda/0x110
[10051.008207] force_page_cache_ra+0x23d/0x3d0
[10051.009087] page_cache_sync_ra+0xca/0x300
[10051.009970] generic_file_buffered_read+0xbea/0x2130
[10051.012685] generic_file_read_iter+0x315/0x490
[10051.014472] blkdev_read_iter+0x113/0x1b0
[10051.015300] aio_read+0x2ad/0x450
[10051.023786] io_submit_one+0xc8e/0x1d60
[10051.029855] __se_sys_io_submit+0x125/0x350
[10051.033442] do_syscall_64+0x2d/0x40
[10051.034156] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10051.048733] Allocated by task 18598:
[10051.049482] kasan_save_stack+0x19/0x40
[10051.050263] __kasan_kmalloc.constprop.1+0xc1/0xd0
[10051.051230] kmem_cache_alloc+0x146/0x440
[10051.052060] mempool_alloc+0x125/0x2f0
[10051.052818] bio_alloc_bioset+0x353/0x590
[10051.053658] mpage_alloc+0x3b/0x240
[10051.054382] do_mpage_readpage+0xddf/0x1ef0
[10051.055250] mpage_readahead+0x264/0x500
[10051.056060] read_pages+0x1c1/0xbf0
[10051.056758] page_cache_ra_unbounded+0x4c2/0x6f0
[10051.057702] do_page_cache_ra+0xda/0x110
[10051.058511] force_page_cache_ra+0x23d/0x3d0
[10051.059373] page_cache_sync_ra+0xca/0x300
[10051.060198] generic_file_buffered_read+0xbea/0x2130
[10051.061195] generic_file_read_iter+0x315/0x490
[10051.062189] blkdev_read_iter+0x113/0x1b0
[10051.063015] aio_read+0x2ad/0x450
[10051.063686] io_submit_one+0xc8e/0x1d60
[10051.064467] __se_sys_io_submit+0x125/0x350
[10051.065318] do_syscall_64+0x2d/0x40
[10051.066082] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10051.067455] Freed by task 13307:
[10051.068136] kasan_save_stack+0x19/0x40
[10051.068931] kasan_set_track+0x1c/0x30
[10051.069726] kasan_set_free_info+0x1b/0x30
[10051.070621] __kasan_slab_free+0x111/0x160
[10051.071480] kmem_cache_free+0x94/0x460
[10051.072256] mempool_free+0xd6/0x320
[10051.072985] bio_free+0xe0/0x130
[10051.073630] bio_put+0xab/0xe0
[10051.074252] bio_endio+0x3a6/0x5d0
[10051.074984] blk_update_request+0x590/0x1370
[10051.075870] scsi_end_request+0x7d/0x400
[10051.076667] scsi_io_completion+0x1aa/0xe50
[10051.077503] scsi_softirq_done+0x11b/0x240
[10051.078344] blk_mq_complete_request+0xd4/0x120
[10051.079275] scsi_mq_done+0xf0/0x200
[10051.080036] virtscsi_vq_done+0xbc/0x150
[10051.080850] vring_interrupt+0x179/0x390
[10051.081650] __handle_irq_event_percpu+0xf7/0x490
[10051.082626] handle_irq_event_percpu+0x7b/0x160
[10051.083527] handle_irq_event+0xcc/0x170
[10051.084297] handle_edge_irq+0x215/0xb20
[10051.085122] asm_call_irq_on_stack+0xf/0x20
[10051.085986] common_interrupt+0xae/0x120
[10051.086830] asm_common_interrupt+0x1e/0x40
==================================================================
Bio will be checked at beginning of submit_bio_noacct(). If bio needs
to be throttled, it will start the timer and stop submit bio directly.
Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.
But in the current process, if bio is throttled, it will still set bio
issue->value by blkcg_bio_issue_init(). This is redundant and may cause
the above use-after-free.
CPU0 CPU1
submit_bio
submit_bio_noacct
submit_bio_checks
blk_throtl_bio()
<=mod_timer(&sq->pending_timer
blk_throtl_dispatch_work_fn
submit_bio_noacct() <= bio have
throttle tag, will throw directly
and bio issue->value will be set
here
bio_endio()
bio_put()
bio_free() <= free this bio
blkcg_bio_issue_init(bio)
<= bio has been freed and
will lead to UAF
return BLK_QC_T_NONE
Fix this by remove extra blkcg_bio_issue_init.
Fixes: e439bedf6b (blkcg: consolidate bio_issue_init() to be a part of core)
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Link: https://lore.kernel.org/r/20211112093354.3581504-1-qiulaibin@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 2ea5999d07.
As Dmitry Torokhov pointed out, the previous code (KEY_DISPLAY_OFF) is
actually correct. The real issue is that current desktop environments
don't deal it properly. Mapping it to another event does not solve the
issue.
So I'm reverting that change, keeping key 0x35 mapped to KEY_DISPLAY_OFF
Signed-off-by: Vinícius Angiolucci Reis <angiolucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the same cleanup code independent of whether the cgroup to be
uncharged and unref'd is the source or the destination cgroup. Use a
bool to track whether the destination cgroup has been charged, which also
fixes a bug in the error case: the destination cgroup must be uncharged
only if it does not match the source.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When UBSAN is enabled, the code emitted for the call to guest_pv_has
includes a call to __ubsan_handle_load_invalid_value. objtool
complains that this call happens with UACCESS enabled; to avoid
the warning, pull the calls to user_access_begin into both arms
of the "if" statement, after the check for guest_pv_has.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"maxItems" is not needed with an "items" list
Fixes:
$ DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml make dtbs_check
Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml: properties:clocks: {'required': ['maxItems']} is not allowed for {'minItems': 1, 'maxItems': 2, 'items': [{'description': 'High-frequency oscillator input, divided internally'}, {'description': 'Low-frequency oscillator input, only found on some variants'}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
...
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211029142443.68779-1-david@ixit.cz
