Do it when parsing like in other actions instead of when
checking if goto is supported in current scenario.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
A user is expected to explicit request a fwd or drop action.
It is not correct to implicit add a fwd action for the user,
when modify header action flag exists.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
modify_header_match_supported() should return type bool but
it returns the value returned by is_action_keys_supported()
which is type int.
is_action_keys_supported() always returns either -EOPNOTSUPP
or 0 and it shouldn't change as the purpose of the function
is checking for support. so just make the function return
a bool type.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Prior to this patch, ethtool -X fail but the user receives a success
status. Try to roll-back when failing and return success status
accordingly.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
- fix a regression in GPIO ACPI on HP ElitePad 1000 G2 where the
gpio_set_debounce_timeout() now returns a fatal error if the specific
debounce period is not supported by the driver instead of just emitting
a warning
- fix return values of irq_mask/unmask() callbacks in gpio-uniphier
- fix hwirq calculation in gpio-aspeed-sgpio
- fix two issues in gpio-rockchip: only make the extended debounce support
available for v2 and remove a redundant BIT() usage
-----BEGIN PGP SIGNATURE-----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=3LqR
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in GPIO ACPI on HP ElitePad 1000 G2 where the
gpio_set_debounce_timeout() now returns a fatal error if the specific
debounce period is not supported by the driver instead of just
emitting a warning
- fix return values of irq_mask/unmask() callbacks in gpio-uniphier
- fix hwirq calculation in gpio-aspeed-sgpio
- fix two issues in gpio-rockchip: only make the extended debounce
support available for v2 and remove a redundant BIT() usage
* tag 'gpio-fixes-for-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio/rockchip: fix get_direction value handling
gpio/rockchip: extended debounce support is only available on v2
gpio: gpio-aspeed-sgpio: Fix wrong hwirq in irq handler.
gpio: uniphier: Fix void functions to remove return value
gpiolib: acpi: Make set-debounce-timeout failures non fatal
Revert a recent commit related to memory management that turned out
to be problematic (Jia He).
-----BEGIN PGP SIGNATURE-----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=F6sF
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent commit related to memory management that turned out to
be problematic (Jia He)"
* tag 'acpi-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: Add memory semantics to acpi_os_map_memory()"
- It turns out that the optimised string routines merged in 5.14 are not
safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond the
end of a string (strcmp, strncmp). Such reading may go across a 16
byte tag granule and cause a tag check fault. When KASAN_HW_TAGS is
enabled, use the generic strcmp/strncmp C implementation.
- An errata workaround for ThunderX relied on the CPU capabilities being
enabled in a specific order. This disappeared with the automatic
generation of the cpucaps.h file (sorted alphabetically). Fix it by
checking the current CPU only rather than the system-wide capability.
- Add system_supports_mte() checks on the kernel entry/exit path and
thread switching to avoid unnecessary barriers and function calls on
systems where MTE is not supported.
- kselftests: skip arm64 tests if the required features are missing.
-----BEGIN PGP SIGNATURE-----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=JIq+
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- It turns out that the optimised string routines merged in 5.14 are
not safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond
the end of a string (strcmp, strncmp). Such reading may go across a
16 byte tag granule and cause a tag check fault. When KASAN_HW_TAGS
is enabled, use the generic strcmp/strncmp C implementation.
- An errata workaround for ThunderX relied on the CPU capabilities
being enabled in a specific order. This disappeared with the
automatic generation of the cpucaps.h file (sorted alphabetically).
Fix it by checking the current CPU only rather than the system-wide
capability.
- Add system_supports_mte() checks on the kernel entry/exit path and
thread switching to avoid unnecessary barriers and function calls on
systems where MTE is not supported.
- kselftests: skip arm64 tests if the required features are missing.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Restore forced disabling of KPTI on ThunderX
kselftest/arm64: signal: Skip tests if required features are missing
arm64: Mitigate MTE issues with str{n}cmp()
arm64: add MTE supported check to thread switching and syscall entry/exit
PTR_ERR() should access the value just tested by IS_ERR(),
otherwise the wrong error code will be returned.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: c2f17e60cb ("drm/gma500: Embed struct drm_device in struct drm_psb_private")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924094040.3631675-1-yangyingliang@huawei.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmFNudoTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi93DCACjNadeFDipw3oAkzdAo+wo0MSYgByU
4eu3XN77yTHphc+xoCU/9cCeSkthfNc2XZDktb22lbAX2QxCgvQsWFgck+i0d245
9uQ68IycrUza9PGjLL3okZiLGzqsk97ZDt7vqXT51zN6dgEATVJ5YaXIhVIwAIM0
F6VVcoHruoOPLhPXctQUZusWS+XPzPvU34n2sNodREv9mYeoFmaZJ15wB6UZn2Ps
qL6Usoq15EH5cbW60XbqVWFDAhWmCN/6HG3b6w3WtD+lVb2NWTFJOAZGxMVvNo46
1TacgQUVs7iIh+bol3modOT94yVZ4Cvrb0uUMY/oE4AgjVPGxSjHSeMB
=7D7F
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.15-rc3' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a potential array out of bounds access from Dan"
* tag 'ceph-for-5.15-rc3' of git://github.com/ceph/ceph-client:
ceph: fix off by one bugs in unsafe_request_wait()
MIPI-DSI devices need to call mipi_dsi_attach() when their probe is done
to attach against their host.
However, at removal or when an error occurs, that attachment needs to be
undone through a call to mipi_dsi_detach().
Let's create a device-managed variant of the attachment function that
will automatically detach the device at unbind.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-5-maxime@cerno.tech
Devices that take their data through the MIPI-DSI bus but are controlled
through a secondary bus like I2C have to register a secondary device on
the MIPI-DSI bus through the mipi_dsi_device_register_full() function.
At removal or when an error occurs, that device needs to be removed
through a call to mipi_dsi_device_unregister().
Let's create a device-managed variant of the registration function that
will automatically unregister the device at unbind.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-4-maxime@cerno.tech
Interactions between bridges, panels, MIPI-DSI host and the component
framework are not trivial and can lead to probing issues when
implementing a display driver. Let's document the various cases we need
too consider, and the solution to support all the cases.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-3-maxime@cerno.tech
The bridge documentation overview is quite packed already, and we'll add
some more documentation that isn't part of an overview at all.
Let's add some sections to the documentation to separate each bits.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-2-maxime@cerno.tech
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmFNp2UACgkQnJ2qBz9k
QNlubwf/Zv5XJccDBGxn0pB7ew1fN4HowTbWdaS0ELDuLZ2KHhZgEbtUu0V2oZ7I
pkUMO97llPk0KHWWjcooIaBMGbBQ78Hqq3xFWWboxEu5hMhJyN1cR2uJlrELvxp1
HsKKaREaUl8jHNQyIuREl/SqLaHmW4LWgrVCZKUTBEc4BeRz2E0C4LTymAZEpTXt
UCRwAU8itK8Z9/Da1xJ6b04/ZMamgoc0a8Rzq3YwCIcUyFLJATB1/XHR6j0c6B6x
gH/y7m/y1m3BFsMbMwGNMwiyJWcBXy2RB4I3B4HB3U6ifBL3ebFQlPQIu5PzRbiG
bGaWRx5o8c5mY/eHpFV4kZS30HM25A==
=Wep3
-----END PGP SIGNATURE-----
Merge tag 'fixes_for_v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull misc filesystem fixes from Jan Kara:
"A for ext2 sleep in atomic context in case of some fs problems and a
cleanup of an invalidate_lock initialization"
* tag 'fixes_for_v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: fix sleeping in atomic bugs on error
mm: Fully initialize invalidate_lock, amend lock class later
Pull vfs fixes from Al Viro:
"Followups to nodev root stuff from this merge window"
* 'work.init' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
init: don't panic if mount_nodev_root failed
init/do_mounts.c: Harden split_fs_names() against buffer overflow
When running ->fallocate(), blkdev_fallocate() should hold
mapping->invalidate_lock to prevent page cache from being accessed,
otherwise stale data may be read in page cache.
Without this patch, blktests block/009 fails sometimes. With this patch,
block/009 can pass always.
Also as Jan pointed out, no pages can be created in the discarded area
while you are holding the invalidate_lock, so remove the 2nd
truncate_bdev_range().
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210923023751.1441091-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rq_qos framework is only applied on request based driver, so:
1) rq_qos_done_bio() needn't to be called for bio based driver
2) rq_qos_done_bio() needn't to be called for bio which isn't tracked,
such as bios ended from error handling code.
Especially in bio_endio():
1) request queue is referred via bio->bi_bdev->bd_disk->queue, which
may be gone since request queue refcount may not be held in above two
cases
2) q->rq_qos may be freed in blk_cleanup_queue() when calling into
__rq_qos_done_bio()
Fix the potential kernel panic by not calling rq_qos_ops->done_bio if
the bio isn't tracked. This way is safe because both ioc_rqos_done_bio()
and blkcg_iolatency_done_bio() are nop if the bio isn't tracked.
Reported-by: Yu Kuai <yukuai3@huawei.com>
Cc: tj@kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable local interrupts before requesting C1 on the last two generations
of Intel Xeon platforms: Sky Lake, Cascade Lake, Cooper Lake, Ice Lake.
This decreases average C1 interrupt latency by about 5-10%, as measured
with the 'wult' tool.
The '->enter()' function of the driver enters C-states with local
interrupts disabled by executing the 'monitor' and 'mwait' pair of
instructions. If an interrupt happens, the CPU exits the C-state and
continues executing instructions after 'mwait'. It does not jump to
the interrupt handler, because local interrupts are disabled. The
cpuidle subsystem enables interrupts a bit later, after doing some
housekeeping.
With this patch, we enable local interrupts before requesting C1. In
this case, if the CPU wakes up because of an interrupt, it will jump
to the interrupt handler right away. The cpuidle housekeeping will be
done after the pending interrupt(s) are handled.
Enabling interrupts before entering a C-state has measurable impact
for faster C-states, like C1. Deeper, but slower C-states like C6 do
not really benefit from this sort of change, because their latency is
a lot higher comparing to the delay added by cpuidle housekeeping.
This change was also tested with cyclictest and dbench. In case of Ice
Lake, the average cyclictest latency decreased by 5.1%, and the average
'dbench' throughput increased by about 0.8%. Both tests were run for 4
hours with only C1 enabled (all other idle states, including 'POLL',
were disabled). CPU frequency was pinned to HFM, and uncore frequency
was pinned to the maximum value. The other platforms had similar
single-digit percentage improvements.
It is worth noting that this patch affects 'cpuidle' statistics a tiny
bit. Before this patch, C1 residency did not include the interrupt
handling time, but with this patch, it will include it. This is similar
to what happens in case of the 'POLL' state, which also runs with
interrupts enabled.
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When some cores are disabled on AMD platforms, the system will no longer
be able to enter suspend-to-idle s0ix.
Update to allow playing dead in C3 state so that the CPUs can enter the
deepest state on AMD platforms.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1708
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Richard Gong <richard.gong@amd.com>
[ rjw: Fixed coding style ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We don't retry short writes and so we would never get to async setup in
io_write() in that case. Thus ret2 > 0 is always false and
iov_iter_advance() is never used. Apparently, the same is found by
Coverity, which complains on the code.
Fixes: cd65869512 ("io_uring: use iov_iter state save/restore helpers")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5b33e61034748ef1022766efc0fb8854cfcf749c.1632500058.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no reason to punt it unconditionally, we just need to ensure that
the submit lock grabbing is conditional.
Fixes: 05f3fb3c53 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For each provided buffer, we allocate a struct io_buffer to hold the
data associated with it. As a large number of buffers can be provided,
account that data with memcg.
Fixes: ddf0322db7 ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For multishot mode, there may be cases like:
iowq original context
io_poll_add
_arm_poll()
mask = vfs_poll() is not 0
if mask
(2) io_poll_complete()
compl_unlock
(interruption happens
tw queued to original
context)
io_poll_task_func()
compl_lock
(3) done = io_poll_complete() is true
compl_unlock
put req ref
(1) if (poll->flags & EPOLLONESHOT)
put req ref
EPOLLONESHOT flag in (1) may be from (2) or (3), so there are multiple
combinations that can cause ref underfow.
Let's address it by:
- check the return value in (2) as done
- change (1) to if (done)
in this way, we only do ref put in (1) if 'oneshot flag' is from
(2)
- do poll.done check in io_poll_task_func(), so that we won't put ref
for the second time.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210922101238.7177-4-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should set EPOLLONESHOT if cqring_fill_event() returns false since
io_poll_add() decides to put req or not by it.
Fixes: 5082620fb2 ("io_uring: terminate multishot poll for CQ ring overflow")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210922101238.7177-3-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If poll arming and poll completion runs in parallel, there maybe races.
For instance, run io_poll_add in iowq and io_poll_task_func in original
context, then:
iowq original context
io_poll_add
vfs_poll
(interruption happens
tw queued to original
context) io_poll_task_func
generate cqe
del from cancel_hash[]
if !poll.done
insert to cancel_hash[]
The entry left in cancel_hash[], similar case for fast poll.
Fix it by set poll.done = true when del from cancel_hash[].
Fixes: 5082620fb2 ("io_uring: terminate multishot poll for CQ ring overflow")
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210922101238.7177-2-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dave reports that a coredumping workload gets stuck in 5.15-rc2, and
identified the culprit in the Fixes line below. The problem is that
relying solely on fatal_signal_pending() to gate whether to exit or not
fails miserably if a process gets eg SIGILL sent. Don't exclusively
rely on fatal signals, also check if the thread group is exiting.
Fixes: 15e20db2e0 ("io-wq: only exit on fatal signals")
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch fixes a spelling typo in acpi/Kconfig
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a spelling mistake in the documentation with the Windows
Millennium edition. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
BRI0A49 and BDP3336 are already on the list.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Without this call an xarray entry is leaked when the vfio_ap device is
unprobed. It was missed when the below patch was rebased across the
dev_set patch. Keep the remove function in the same order as the error
unwind in probe.
Fixes: eb0feefd4c ("vfio/ap_ops: Convert to use vfio_register_group_dev()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/0-v3-f9b50340cdbb+e4-ap_uninit_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In commit 4e5c8a99e1 ("drm/i915: Drop i915_request.lock requirement
for intel_rps_boost()"), we decoupled the rps worker from the pm so
that we could avoid the synchronization penalty which makes the
assertion liable to run too early. Which makes warning invalid hence
removed.
Fixes: 4e5c8a99e1 ("drm/i915: Drop i915_request.lock requirement for intel_rps_boost()")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914090412.1393498-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Inspired by commit b8928c2b5d ("arm64: tegra: Consolidate audio card
names"). Based on this update HDA card name on Jetson TX2 NX platform.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support for audio-graph based sound card on Jetson TX2 NX.
Following I/O interfaces are enabled.
* I2S1 and I2S3
* DMIC1 and DMIC2
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable powerkey and resin nodes to let the board handle POWER and
Volume- keys properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org
Specify recovery and bootloader magic values to be programmed by the
qcom-pon driver. This allows the bootloader to handle
reboot-to-bootloader functionality.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org
Change pm8150 to use the qcom,pm8998-pon compatible string for the pon
in order to pass reboot mode properly.
Fixes: 5101f22a5c ("arm64: dts: qcom: pm8150: Add base dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org
This is possible because of moving lock into ntfs_create_inode.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Right now ntfs3 uses posix_acl_equiv_mode instead of
posix_acl_update_mode like all other fs.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In case of removing of xattr there must be XATTR_REPLACE flag and
zero length. We already check XATTR_REPLACE in ntfs_set_ea, so
now we pass XATTR_REPLACE to ntfs_set_ea.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We can safely move set_cached_acl because it works with NULL acl too.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now ntfs3 locks mutex for smaller time.
Theoretically in successful cases those locks aren't needed at all.
But proving the same for error cases is difficult.
So instead of removing them we just move them.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We need to always call indx_delete_entry after indx_insert_entry
if error occurred.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Usnic VF doesn't need lock in atomic context to create QPs, so it is safe
to use mutex instead of spinlock. Such change fixes the following smatch
error.
Smatch static checker warning:
lib/kobject.c:289 kobject_set_name_vargs()
warn: sleeping in atomic context
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2a0e295786c127e518ebee8bb7cafcb819a625f6.1631520231.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>