- Restore the firmware's IDT when calling EFI boot services and before
ExitBootServices() has been called. This fixes a boot failure on what
appears to be a tablet with 32-bit UEFI running a 64-bit kernel.
-----BEGIN PGP SIGNATURE-----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=8vyu
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix build error on RHEL where -Werror=maybe-uninitialized is set.
- Restore the firmware's IDT when calling EFI boot services and before
ExitBootServices() has been called. This fixes a boot failure on what
appears to be a tablet with 32-bit UEFI running a 64-bit kernel.
* tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix a maybe-uninitialized build warning treated as error
x86/efi: Restore Firmware IDT before calling ExitBootServices()
This reverts commit 83af58f806.
It turns out that at least the assembly implementation for strncpy() was
buggy. Revert the whole commit and return back to the default coding.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Second, and most likely last, set of patches for v5.15. Lots of
iwlwifi patches this time, but smaller changes to other drivers as
well. Nothing special standing out.
Major changes:
rtw88
* add quirk to disable pci caps on HP Pavilion 14-ce0xxx
brcmfmac
* Add WPA3 Personal with FT to supported cipher suites
wcn36xx
* allow firmware name to be overridden by DT
iwlwifi
* support scanning hidden 6GHz networks
* support for a new hardware family (Bz)
* support for new firmware API versions
mwifiex
* add reset_d3cold quirk for Surface gen4+ devices
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmErdakVHGt2YWxvQGNv
ZGVhdXJvcmEub3JnAAoJEG4XJFUm622bli4H/2cSfLSa5g+SAttVXVaWEVKnhIQc
0ZRlkM5GOJyokGsyeniszCDCZDqeYaQrM4cS49qtT7M8xDGajsVDEYcVFE9TzJx8
FQjqQwzJgDKJPk9LVXe49y+Tr9/KKM8OMe+KRDJ1z57ImYWVJ2OOEV7dAPler5hR
fwWezpcDrhzEGqpeDEjufaABqoiNRf9R3bHjPFvVod9Fk7k+vzNDW3TXKabAenC9
AYcECmBM8t25ZolheLgHxrzhZ+Q6AZ8qSjvBdZa6+OJcZzdwJIteWVsSItGfyImF
Vr78DwuwHoP2N1Y/bHPusjPklgV5U8qj5sCpdYzc1mUHXozx47MomQD4lkc=
=q8mI
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
pull-request: wireless-drivers-next-2021-08-29
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
wireless-drivers-next patches for v5.15
Second, and most likely last, set of patches for v5.15. Lots of
iwlwifi patches this time, but smaller changes to other drivers as
well. Nothing special standing out.
Major changes:
rtw88
* add quirk to disable pci caps on HP Pavilion 14-ce0xxx
brcmfmac
* Add WPA3 Personal with FT to supported cipher suites
wcn36xx
* allow firmware name to be overridden by DT
iwlwifi
* support scanning hidden 6GHz networks
* support for a new hardware family (Bz)
* support for new firmware API versions
mwifiex
* add reset_d3cold quirk for Surface gen4+ devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Certain use cases want to use CLOCK_BOOTTIME or CLOCK_REALTIME rather than
CLOCK_MONOTONIC, instead of the default CLOCK_MONOTONIC.
Add an IORING_TIMEOUT_BOOTTIME and IORING_TIMEOUT_REALTIME flag that
allows timeouts and linked timeouts to use the selected clock source.
Only one clock source may be selected, and we -EINVAL the request if more
than one is given. If neither BOOTIME nor REALTIME are selected, the
previous default of MONOTONIC is used.
Link: https://github.com/axboe/liburing/issues/369
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq divides work into two categories:
1) Work that completes in a bounded time, like reading from a regular file
or a block device. This type of work is limited based on the size of
the SQ ring.
2) Work that may never complete, we call this unbounded work. The amount
of workers here is just limited by RLIMIT_NPROC.
For various uses cases, it's handy to have the kernel limit the maximum
amount of pending workers for both categories. Provide a way to do with
with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation.
IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets
the max worker count to what is being passed in for each category. The
old values are returned into that same array. If 0 is being passed in for
either category, it simply returns the current value.
The value is capped at RLIMIT_NPROC. This actually isn't that important
as it's more of a hint, if we're exceeding the value then our attempt
to fork a new worker will fail. This happens naturally already if more
than one node is in the system, as these values are per-node internally
for io-wq.
Reported-by: Johannes Lundberg <johalun0@gmail.com>
Link: https://github.com/axboe/liburing/issues/420
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Building on ARCH=um causes a "redefined" warning, so remove this
PT_OFFSET macro to avoid the warning.
drivers/dma/ptdma/ptdma.h:34: warning: "PT_OFFSET" redefined
34 | #define PT_OFFSET 0x0
|
In file included from ./arch/um/include/asm/thread_info.h:17,
from ./include/linux/thread_info.h:60,
from ./include/asm-generic/preempt.h:5,
from ./arch/um/include/generated/asm/preempt.h:1,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from ./include/linux/debugfs.h:15,
from drivers/dma/ptdma/ptdma-debugfs.c:12:
./arch/x86/um/shared/sysdep/ptrace_user.h:4: note: this is the location of the previous definition
4 | #define PT_OFFSET(r) ((r) * sizeof(long))
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2a99524459ce ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Link: https://lore.kernel.org/r/1630178908-54973-1-git-send-email-Sanju.Mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Expose data about the configuration and operation of the
PTDMA through debugfs entries: device name, capabilities,
configuration, statistics.
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Link: https://lore.kernel.org/r/1629208559-51964-4-git-send-email-Sanju.Mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for AMD PTDMA controller. It performs high-bandwidth
memory to memory and IO copy operation. Device commands are managed
via a circular queue of 'descriptors', each of which specifies source
and destination addresses for copying a single buffer of data.
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Link: https://lore.kernel.org/r/1629208559-51964-2-git-send-email-Sanju.Mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The spinlock is not being used in hard interrupt context. There is no need
to disable irq when acquiring the lock. The interrupt thread handler also
is not in bottom half context, therefore we can also remove disabling of
the bh. Convert all dev_lock acquisition to plain spin_lock() calls.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162984026772.1939166.11504067782824765879.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The cmd_lock spinlock is not being used in hard interrupt context. There is
no need to disable irq when acquiring the lock. Convert all cmd_lock
acquisition to plain spin_lock() calls.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162984027930.1939209.15758413737332339204.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DSA spec says WQ priv bit is 0 if the Privileged Mode Enable field of the
PCI Express PASID capability is 0 and pasid is enabled. Make sure that the
WQCFG priv field is set correctly according to usage type. Reject config if
setting up kernel WQ type and no support. Also add the correct priv setup
for a descriptor.
Fixes: 484f910e93 ("dmaengine: idxd: fix wq config registers offset programming")
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162939084657.903168.14160019185148244596.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.
Call trace:
[ 489.531257] dma_alloc_from_pool+0x8c/0x1c0
[ 489.535431] dma_direct_alloc+0x284/0x330
[ 489.539432] dma_alloc_attrs+0x80/0xf0
[ 489.543174] dma_pool_alloc+0x160/0x2c0
[ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180
[ 489.551524] dmatest_func+0x3cc/0x114c
[ 489.555266] kthread+0x124/0x130
[ 489.558486] ret_from_fork+0x10/0x3c
[ 489.562051] ---[ end trace 248625b2d596a90a ]---
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Harini Katakam <harini.katakam@xilinx.com>
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The CSI2RX subsystem on J721E is serviced by UDMA via PSI-L to transfer
frames to memory. It can have up to 32 threads per instance. J721E has
two instances of the subsystem, so there are 64 threads total. Add them
to the endpoint map.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Acked-by: Peter Ujfalusi <peter.ujflausi@gmail.com>
Link: https://lore.kernel.org/r/20210819110106.31409-1-p.yadav@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add DMA Controller driver for RZ/G2L SoC.
Based on the work done by Chris Brandt for RZ/A DMA driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210806095322.2326-4-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add DMA_SLAVE_BUSWIDTH_128_BYTES to dma_slave_width for DMA engines
and users to select 128 bytes as bus width.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210806095322.2326-3-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Only one commit this time with revert of O_NDELAY removal for the floppy.
Users reported that the commit breaks userspace utils and known floppy
workflow patterns. We already reverted the same commit back in 2016
presumably for the same reason. Completely drop O_NDELAY for floppy seems
excessive to solve problems it introduces.
I started to write basic selftests for the floppy to prevent this kind of
userspace breaks in the future.
Signed-off-by: Denis Efremov <efremov@linux.com>
-----BEGIN PGP SIGNATURE-----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=BNuJ
-----END PGP SIGNATURE-----
Merge tag 'floppy-for-5.15' of https://github.com/evdenis/linux-floppy into for-5.15/drivers
Pull floppy fix from Denis:
"Bring back O_NDELAY for floppy
Only one commit this time with revert of O_NDELAY removal for the floppy.
Users reported that the commit breaks userspace utils and known floppy
workflow patterns. We already reverted the same commit back in 2016
presumably for the same reason. Completely drop O_NDELAY for floppy seems
excessive to solve problems it introduces.
I started to write basic selftests for the floppy to prevent this kind of
userspace breaks in the future.
Signed-off-by: Denis Efremov <efremov@linux.com>"
* tag 'floppy-for-5.15' of https://github.com/evdenis/linux-floppy:
Revert "floppy: reintroduce O_NDELAY fix"
./include/linux/ssb/ssb_driver_extif.h:200:8-9:WARNING: return of 0/1 in
function 'ssb_extif_available' with return type bool
Return statements in functions returning bool should use true/false
instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210824061341.59255-1-deng.changcheng@zte.com.cn
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it
seems that putting the wifi device into D3cold is required according
to errata.inf file on Windows installation (Windows/INF/errata.inf).
This patch adds a function that performs power-cycle (put into D3cold
then D0) and call the function at the end of reset_prepare().
Note: Need to also reset the parent device (bridge) of wifi on SB1;
it might be because the bridge of wifi always reports it's in D3hot.
When I tried to reset only the wifi device (not touching parent), it gave
the following error and the reset failed:
acpi device:4b: Cannot transition to power state D0 for parent in D3hot
mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible)
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210820142050.35741-3-verdre@v0yd.nl
This commit adds the ability to apply device-specific quirks to the
mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses
with dmi.c. We'll add identifiers to match various MS Surface devices,
which this is primarily meant for, later.
This commit is a slightly modified version of a previous patch sent in
by Tsuchiya Yuto.
Co-developed-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210820142050.35741-2-verdre@v0yd.nl
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a
hot resume and then fall back to removing the PCI device and then
reprobing. If this probe fails, the kernel will oops, because brcmf_err,
which is called to report the failure will dereference the stale bus
pointer. Open code and use the default bus-less brcmf_err to avoid this.
Fixes: 8602e62441 ("brcmfmac: pass bus to the __brcmf_err() in pcie.c")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
kmemleak reported that dev_name() of internally-handled cores were leaked
on driver unbinding. Let's use device_initialize() to take refcounts for
them and put_device() to properly free the related stuff.
While looking at it, there's another potential issue for those which should
be *registered* into driver core. If device_register() failed, we put
device once and freed bcma_device structures. In bcma_unregister_cores(),
they're treated as unregistered and we hit both UAF and double-free. That
smells not good and has also been fixed now.
Fixes: ab54bc8460 ("bcma: fill core details for every device")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210727025232.663-2-yuzenghui@huawei.com
Make sure that the PLL that feeds the CPU won't be stopped while the
kernel is running.
This fixes a problem on JZ4760 (and probably others) where under very
specific conditions, the main PLL would be turned OFF when the kernel
was shutting down, causing the shutdown process to fail.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
I think last commits in tag iwlwifi-next-for-kalle-2021-08-26 are not
ready yet so I'm skipping those and pulling an earlier commit. I
modified Luca's description below to not include the skipped commits.
iwlwifi patches for v5.15
* Support scanning hidden 6GHz networks;
* Some improvements in the FW error dumps;
* Add some HE capability flags
* A bunch of janitorial clean-ups;
* Clean-ups in the TX code;
* Small fix for SMPS;
* Support for a new hardware family (Bz);
* Small fix in the scan code;
* A bunch of changes in the D3 code, including new FW API;
* Finalize the refactoring of 6GHz scan;
* Initial changes in the SAR profile code;
* Fix reading one of our ACPI tables (WTAS);
* Support some new ACPI table revisions;
* Support new API of the WoWlan status FW notification;
* Fixes in SAR ACPI tables handling;
* Some debugging improvements;
* Fix in ROC;
* Support for new FW API versions;
* Support new FW command versions;
* Some other small fixes, clean-ups and improvements.
smp_processor_id()/raw* will be called once each when not
more queues in virtnet_xdp_get_sq() which is called in
non-preemptible context, so it's safe to call the function
smp_processor_id() once.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.
Finally, the now useless 'dma_mask' variable has been removed.
It has been compile tested.
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
It has been compile tested.
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.
@@ @@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@ @@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@ @@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
NPC extraction profile marks layer types
NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for
STAG after parsing input packet. Those layer types
can be used to install ntuple filters using
vlan-etype option. Below are the commands and
corresponding behavior with this patch in place.
> alias nt "ethtool -U eth0 flow-type ether"
> nt vlan 5 m 0xf000 action 0
Input packets with outer VLAN id as 5 i.e,
stag packets with VLAN id 5 and ctag packets with
VLAN id as 5 are hit.
> nt vlan-etype 0x8100 action 0
All input ctag packets with any VLAN id are hit.
> nt vlan-etype 0x88A8 action 0
All input stag packets with any VLAN id are hit.
> nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0
All input ctag packets with VLAN id 5 are hit.
> nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0
All input stag packets with VLAN id 5 are hit.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver crashes when restoring from the Hibernate. In the resume flow,
driver need to clean up the older nic/vec objects and re-initialize them.
Fixes: 8aaa112a57 ("net: atlantic: refactoring pm logic")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed inconsistent license text across the RVU admin
function driver.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed inconsistent license text across the netdev
drivers.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
queue
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-08-27
ravindhan Gunasekaran says:
This adds support for Credit-based shaper qdisc offload from
Traffic Control system. It enables traffic prioritization and
bandwidth reservation via the Credit-Based Shaper which is
implemented in hardware by i225 controller.
Patch 1/3 adds a default cycle-time for TSN mode to be configured.
Patch 2/3 helps to separate TSN mode programming on the fly and
during reset sequence. It also simplifies handling features flags
for various TSN modes supported by i225 in the driver.
Patch 3/3 adds support for IEEE802.1Qav(CBS) standard
implemented in i225 HW. Two sets of CBS HW shapers are present
in i225 and driver enables them in the two high priority queues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Move static "isinit" variable to wilc_spi structure to allow multiple
WILC1000 devices per machine.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210828151346.3012697-1-davidm@egauge.net
This allows the driver to connect to BSSIDs supporting SAE with 802.11r.
Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2.
AP was set to 'sae-mixed' (WPA2/3 Personal).
Signed-off-by: Paweł Drewniak <czajernia@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210824221330.3847139-1-czajernia@gmail.com
The SSB header only uses the legacy <linux/gpio.h> header to get
struct gpio_chip so inluce <linux/gpio/driver.h> which is the right
include to deal with gpio_chip.
Cc: Michael Buesch <m@bues.ch>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210821235800.138817-1-linus.walleij@linaro.org
Don't populate the array fsm_state on the stack but instead it
static const. Makes the object code smaller by 154 bytes:
Before:
text data bss dec hex filename
9213 3904 0 13117 333d .../wireless/rsi/rsi_91x_debugfs.o
After:
text data bss dec hex filename
8995 3968 0 12963 32a3 .../wireless/rsi/rsi_91x_debugfs.o
(gcc version 10.3.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210819125018.8577-1-colin.king@canonical.com
For making user to switch back to the old playback mode, this patch
adds a new module option 'lowlatency' to snd-usb-audio driver.
When user face a regression due to the recent low-latency playback
support, they can test easily by passing lowlatency=0 option without
rebuilding the kernel.
Fixes: 307cc9baac ("ALSA: usb-audio: Reduce latency at playback start, take#2")
Link: https://lore.kernel.org/r/20210829073830.22686-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clang warns:
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:6: warning:
variable 'place' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
if (chnl > 14) {
^~~~~~~~~
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:909:9: note:
uninitialized use occurs here
return place;
^~~~~
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:901:2: note: remove
the 'if' if its condition is always true
if (chnl > 14) {
^~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c:899:10: note:
initialize the variable 'place' to silence this warning
u8 place;
^
= '\0'
1 warning generated.
Commit 369956ae57 ("rtlwifi: rtl8192de: Remove redundant variable
initializations") removed the initialization of place but it appears
that this removal was in the wrong function.
_rtl92c_phy_get_rightchnlplace() returns place's value at the end of the
function so now if the if statement is false, place never gets
initialized. Add that initialization back to address the warning.
place's initialization is not necessary in
rtl92d_get_rightchnlplace_for_iqk() as place is only used within the if
statement so it can be removed, which is likely what was intended in the
first place.
Fixes: 369956ae57 ("rtlwifi: rtl8192de: Remove redundant variable initializations")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210823222014.764557-1-nathan@kernel.org
8821CE causes random freezes on HP Pavilion 14-ce0019nf. Add a quirk
to disable pci ASPM capability.
Signed-off-by: Ugo Rémery <ugo.remery@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210822194932.29630-1-Larry.Finger@lwfinger.net
This adds Global Clock controller (GCC) driver for SM6350 SoC
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210820203624.232268-3-konrad.dybcio@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This error path is unlikely because of it checked for NULL and
returned -ENOMEM earlier in the function. But it should return
an error code here as well if we ever do hit it because of a
race condition or something.
Fixes: bdcd817079 ("Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210813113438.GB30697@kili
The problem is that gpio_free() can sleep and the cfg_soc() can be
called with spinlocks held. One problematic call tree is:
--> ath_reset_internal() takes &sc->sc_pcu_lock spin lock
--> ath9k_hw_reset()
--> ath9k_hw_gpio_request_in()
--> ath9k_hw_gpio_request()
--> ath9k_hw_gpio_cfg_soc()
Remove gpio_free(), use error message instead, so we should make sure
there is no GPIO conflict.
Also remove ath9k_hw_gpio_free() from ath9k_hw_apply_gpio_override(),
as gpio_mask will never be set for SOC chips.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1628481916-15030-1-git-send-email-miaoqing@codeaurora.org
Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.
There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.
I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)
This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629992768-23785-1-git-send-email-loic.poulain@linaro.org