now obeys KVM_CAP_HYPERV_ENFORCE_CPUID. Both the XMM arguments feature
and KVM_CAP_HYPERV_ENFORCE_CPUID are new in 5.14, and each did not know
of the other.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmELlMoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOIigf+O1JWYyfVR16qpVnkI9voa0j7aPKd
0v3Qd0ybEbBqOl2QjYFe+aJa42d8bhiMGRG7UNNxYPmW6MukxM3rWZ0wd8IvlktW
KMR/+2jPw8v8B+M44ty9y30cdW65EGxY8PXPrzSXSF9wT5v0fV8s14Yzxkc1edKM
X3OVJk1AhlRaGN9PyGl3MJxdvQG7Ci9Ep500i5vhAsdb2Azu9TzfQRVUUJ8c2BWj
PEI31Z+E0//G0oU/MiHZ5bsYCboiciiHHJxpdFpxVYN7rQ4sOxJswEsO+PpD00K3
HsZXuTXCRQyZfjbI5QlwNWpU6mZrAb3T8GVNBOP+0g3+fDNyrZzJBiCzbQ==
=bI5h
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Mostly bugfixes; plus, support for XMM arguments to Hyper-V hypercalls
now obeys KVM_CAP_HYPERV_ENFORCE_CPUID.
Both the XMM arguments feature and KVM_CAP_HYPERV_ENFORCE_CPUID are
new in 5.14, and each did not know of the other"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds
KVM: selftests: fix hyperv_clock test
KVM: SVM: improve the code readability for ASID management
KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB
KVM: Do not leak memory for duplicate debugfs directories
KVM: selftests: Test access to XMM fast hypercalls
KVM: x86: hyper-v: Check if guest is allowed to use XMM registers for hypercall input
KVM: x86: Introduce trace_kvm_hv_hypercall_done()
KVM: x86: hyper-v: Check access to hypercall before reading XMM registers
KVM: x86: accept userspace interrupt only if no event is injected
Pull pcmcia fix from Dominik Brodowski:
"Zheyu Ma found and fixed a null pointer dereference bug in the device
driver for the i82092 card reader"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: i82092: fix a null pointer dereference bug
We noticed that the user interface of Android devices becomes very slow
under memory pressure. This is because Android uses the zram driver on top
of the loop driver for swapping, because under memory pressure the swap
code alternates reads and writes quickly, because mq-deadline is the
default scheduler for loop devices and because mq-deadline delays writes by
five seconds for such a workload with default settings. Fix this by making
the kernel select I/O scheduler 'none' from inside add_disk() for loop
devices. This default can be overridden at any time from user space,
e.g. via a udev rule. This approach has an advantage compared to changing
the I/O scheduler from userspace from 'mq-deadline' into 'none', namely
that synchronize_rcu() does not get called.
This patch changes the default I/O scheduler for loop devices from
'mq-deadline' into 'none'.
Additionally, this patch reduces the Android boot time on my test setup
with 0.5 seconds compared to configuring the loop I/O scheduler from user
space.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Martijn Coenen <maco@android.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805174200.3250718-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevator_get_default() uses the following algorithm to select an I/O
scheduler from inside add_disk():
- In case of a single hardware queue or if sharing hardware queues across
multiple request queues (BLK_MQ_F_TAG_HCTX_SHARED), use mq-deadline.
- Otherwise, use 'none'.
This is a good choice for most but not for all block drivers. Make it
possible to override the selection of mq-deadline with a new flag,
namely BLK_MQ_F_NO_SCHED_BY_DEFAULT.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Martijn Coenen <maco@android.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805174200.3250718-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the following kernel-doc warning that appears when building with W=1:
block/partitions/ldm.c:31: warning: expecting prototype for ldm().
Prototype was for ldm_debug() instead
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210805173447.3249906-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We used to follow the rule earlier that the create SD context
always be a multiple of 8. However, with the change:
cifs: refactor create_sd_buf() and and avoid corrupting the buffer
...we recompute the length, and we failed that rule.
Fixing that with this change.
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In fs/f2fs/Kconfig, F2FS_FS_LZ4HC depends on F2FS_FS_LZ4 and F2FS_FS_LZ4
depends on F2FS_FS_COMPRESSION, so no need to make F2FS_FS_LZ4HC depends
on F2FS_FS_COMPRESSION explicitly, remove the redudant "depends on", do
the similar thing for F2FS_FS_LZORLE.
At the same time, it is better to move F2FS_FS_LZORLE next to F2FS_FS_LZO,
it looks like a little more clear when make menuconfig, the location of
"LZO-RLE compression support" is under "LZO compression support" instead
of "F2FS compression feature".
Without this patch:
F2FS compression feature
LZO compression support
LZ4 compression support
LZ4HC compression support
ZSTD compression support
LZO-RLE compression support
With this patch:
F2FS compression feature
LZO compression support
LZO-RLE compression support
LZ4 compression support
LZ4HC compression support
ZSTD compression support
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:
int main()
{
int pipefd[2];
for (int i = 0; i < 1025; i++)
if (pipe(pipefd) == -1)
return 1;
size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
printf("%zd\n", bufsz);
char *buf = calloc(bufsz, 1);
write(pipefd[1], buf, bufsz);
read(pipefd[0], buf, bufsz-1);
write(pipefd[1], buf, 1);
}
Note that you may need to increase your RLIMIT_NOFILE before running the
program.
Fixes: 759c01142a ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Check that the file tail does not cross a page boundary. Requested by
Andreas.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
kmap_atomic() has the side-effect of disabling pagefaults and
preemption. kmap_local_page() does not do this and is preferred.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If queue is dying while iolatency_set_limit() is in progress,
blk_get_queue() won't increment the refcount of the queue. However,
blk_put_queue() will still decrement the refcount later, which will
cause the refcout to be unbalanced.
Thus error out in such case to fix the problem.
Fixes: 8c772a9bfc ("blk-iolatency: fix IO hang due to negative inflight counter")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210805124645.543797-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. If not explicitly taken by the I2C-driver,
then this semaphore is automatically taken by the I2C-bus-driver for
each I2C-transfer and this is a quite expensive operation.
Explicitly take the semaphore in probe() around the register-accesses
done during probe, so that this only needs to be done once, rather then
once per register-access.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. If not explicitly taken by the I2C-driver,
then this semaphore is automatically taken by the I2C-bus-driver for
each I2C-transfer.
Move the AXP20X_CC_CTRL check done in probe() together with the other
register-accesses done in probe, so that we can take the semaphore once
for the entire set of register-accesses.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus and while the kernel holds the semaphore the CPU
and GPU power-states must not be changed otherwise the system will freeze.
This is a complex process, which is quite expensive. This is all done by
iosf_mbi_block_punit_i2c_access(). To ensure that no unguarded I2C-bus
accesses happen, iosf_mbi_block_punit_i2c_access() gets called by the
I2C-bus-driver for every I2C transfer. Because this is so expensive it
is allowed to call iosf_mbi_block_punit_i2c_access() in a nested
fashion, so that higher-level code which does multiple I2C-transfers can
call it once for a group of transfers, turning the calls done by the
I2C-bus-driver into no-ops.
Userspace power-supply API users typically will read all provided
properties in one go, refreshing the last read values when
power_supply_changed() is called by the driver and/or periodically
(e.g. every 2 minutes).
The reading of all properties in one go causes the P-Unit semaphore
to quickly be taken and released multiple times in a row. Certain
PMIC registers like AXP20X_FG_RES are even used in multiple properties
so they get read multiple times, leading to a P-Unit take + release
each time the register is read.
As already mentioned the taking of the P-Unit semaphore is a quite
expensive operation and it has also been reported that the
"hammering" of the P-Unit semaphore done by the axp288_fuel_gauge
driver can even cause stability issues with the system as a whole.
Switch over to a scheme where the axp288_fuel_gauge driver keeps
a local copy of all the registers which it uses for properties
and make it only refresh its copy of the registers if the values
are older then 1 minute; or when a fuel-gauge interrupt has
triggered since the last read.
This not only reduces the amount of reads, it also makes the code
do all the reads in one go, rather then reading specific registers
based on which property is being queried. This allows calling
iosf_mbi_block_punit_i2c_access() once before doing all the reads,
so that we now only take the P-Unit semaphore once per update.
Tested-by: Andrejus Basovas <cpp@gcc.lt>
Signed-off-by: Andrejus Basovas <cpp@gcc.lt>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Accessing registers on the AXP288 is quite expensive, so we should avoid
doing unnecessary accesses.
The FG_LOW_CAP_REG never changes underneath us, so we only need to read
it once. Devices with an AXP288 do not have user-replace (let alone
hot-swappable) batteries and the only bit we care about in the
PWR_OP_MODE register is the CHRG_STAT_BAT_PRESENT bit, so we can get
away with only reading the PWR_OP_MODE register once too.
Note that the FG_LOW_CAP_REG is not marked volatile in the regmap, so we
were effectively already reading it once. This change makes this explicit,
this is done as preparation of a further patch which moves all remaining
register accesses in fuel_gauge_get_property() out of that function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Directly store the struct device pointer in axp288_fg_info, rather then
storing a pointer to the struct platform_device there and then using
"&info->pdev->dev" everywhere.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. This semaphore is automatically taken by the
I2C-bus-driver.
The retry on -EBUSY logic in fuel_gauge_reg_readb() likely was added to
deal with the I2C-bus-drive returning -EBUSY when it failed to take the
semaphore, but this really should never happen. The semaphore code even
has a WARN_ON(ret) to log a kernel backtrace if this does somehow happen,
when this happens something is seriously wrong and the system typically
freezes soon afterwards.
TL;DR: the regmap_read() should never fail with -EBUSY so the retries
are unnecessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When fuel_gauge_reg_readb()/_writeb() fails, report which register we
were trying to read / write when the error happened.
Also reword the message a bit:
- Drop the axp288 prefix, dev_err() already prints this
- Switch from telegram / abbreviated style to a normal sentence, aligning
the message with those from fuel_gauge_read_*bit_word()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Drop the IRQ mapping messages, because they are really not
interesting at all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The debugfs code is simply just dumping a bunch of registers, the same
information can also easily be gotten through the regmap debugfs
interface or through the i2cdump utility.
I've not used the debugfs interface once in all these years that I've
been working on the axp288_fuel_gauge driver, so lets just remove it.
Note this also removes the temperature-channels from the list of
IIO ADC channels used by the driver, since these were only used in the
debugfs interface.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The values of various defines used in the driver are not aligned
properly when tabsize is set to 8 (I guess they were created with
a different tabsize).
Properly align the defines to make the code easier to read.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In the function sc27xx_fgu_probe(), when get irq failed,
platform_get_irq() logs an error message, so remove
redundant message here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This patch modified set_cs_timing parameter, no need pass in spi_delay
to set_cs_timing callback.
By the way, we modified the mediatek and tegra114 spi driver to fix build err.
In mediatek spi driver, We have support set absolute time not clk_count,
and call this function in prepare_message not user's API.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133746.6742-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As we know, spi core layer has removed spi_set_cs_timing() API.
So this patch moved spi_delay for cs_timing from spi_controller
to spi_device, because cs timing should be set by spi_device but
not controller.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133716.32040-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
da9211 regulator needs to be enabled before enabling the mfg_async power
domain. Otherwise the subdomain is not enabled and causes failure in
imgtec gpu driver boot.
Add the "domain-supply" property to the "mfg_async" node in DT.
Signed-off-by: Bilal Wasim <Bilal.Wasim@imgtec.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210701114012.RESEND.3.I9e27871bb700c807a564957302b292e9935dae0b@changeid
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
With commit 1796164fac ("dt-bindings: mmc: document alias support"),
a way to specify fixed index numbers was provided. This patch use aliases
to mmc nodes so the partition name for eMMC and SD card will be consistent
across boots.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210728040710.2891955-2-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
With commit 1796164fac ("dt-bindings: mmc: document alias support"),
a way to specify fixed index numbers was provided. This patch use aliases
to mmc nodes so the partition name for eMMC and SD card will be consistent
across boots.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210728040710.2891955-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix the upper guard and the "removed_region", this fixes the random
crashes which used to occur in memory intensive loads. I'm not sure WHY
the upper guard being 0x2000 instead of 0x1000 doesn't fix this, but it
HAS to be 0x1000.
Fixes: e60fd5ac1f ("arm64: dts: qcom: sdm845-oneplus-common: guard rmtfs-mem")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210720153125.43389-2-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As the default definition breaks booting angler:
[ 1.862561] printk: console [ttyMSM0] enabled
[ 1.872260] msm_serial: driver initialized
D - 15524 - pm_driver_init, Delta
cont_splash_mem was introduced in 74d6d0a145, but the problem
manifested after commit '86588296ac ("fdt: Properly handle "no-map"
field in the memory region")'.
Disabling it because Angler's firmware does not report where the memory
is allocated (dmesg from downstream kernel):
[ 0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000000000000, size 16 MiB, limit 0x0000000000000000
[ 0.000000] cma: CMA: reserved 16 MiB at 0x0000000000000000 for cont_splash_mem
Similar issue might be on Google Nexus 5X (lg-bullhead). Other MSM8992/4
are known to report correct address.
Fixes: 74d6d0a145 ("arm64: dts: qcom: msm8994/8994-kitakami: Fix up the memory map")
Suggested-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Link: https://lore.kernel.org/r/20210622191019.23771-1-petr.vorel@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move all the common device tree bits for both sc7280 IDPs into a
sc7280-idp.dtsi and create 2 different dts files (sc7280-idp.dts
and sc7280-idp2.dts) in order to manage differences across the
IDP SKU1 and SKU2 Boards.
PMR735A is present on IDP board only and is not present on IDP2.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/1628082199-17002-3-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Document the qcom,sc7280-idp2 board based off sc7280 SoC,
The board is also known as piglin in the Chrome OS builds,
so document the google,piglin compatible as well.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1628082199-17002-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There should only be two interconnects defined for IPA on the
QUalcomm SM8350 SoC. The names should also match those specified by
the IPA Device Tree binding.
Fixes: f11d3e7da3 ("arm64: dts: qcom: sm8350: add IPA information")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210804210214.1891755-5-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add IPA-related nodes and definitions to "sc7280.dtsi", including
the reserved memory area used for AP-based IPA firmware loading.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210804210214.1891755-2-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Putting the panel under the bridge chip (under the aux-bus node)
allows the panel driver to get access to the DP AUX bus, enabling all
sorts of fabulous new features.
While we're at this, get rid of a level of hierarchy for the panel
node. It doesn't need "ports / port" and can just have a "port" child.
For Linux, this patch has a hard requirement on the patches adding DP
AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch
("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus").
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210611101711.v10.11.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
IPQ8074 uses Qualcom QCE crypto engine v5.1
which is already supported.
So simply add nodes for its DMA and QCE itself.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20210518181618.3238386-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the qupv3_id_1 node and the i2c13 child node used for i2c devices
connected to gpio0/gpio1.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210513181309.12491-2-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
ipq6018 has 1 pcie gen3 port. This patch adds the support for the same.
The GICv2m reg property value is a guess based on similar SoCs
description in downstream Codeaurora kernel. It appears to work.
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
[baruch: adjust #address-cells/#size-cells; drop unsupported property;
increase parf registers size]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/0f733656666fa6adaa8e196419ebcfd04677d173.1620203062.git.baruch@tkos.co.il
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the required DTS node for the USB VBUS output regulator, which is
available on PM8150B. This will provide the VBUS source to connected
peripherals.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20210427130712.2005456-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add DT binding for CoreSight System Trace Macrocell (STM) on msm8916,
which can benefit the CoreSight development on DB410c.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210321124212.4253-1-leo.yan@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>