Commit graph

1,059,104 commits

Author SHA1 Message Date
Miklos Szeredi
84c215075b fuse: name fs_context consistently
Naming convention under fs/fuse/:

	struct fuse_conn *fc;
	struct fs_context *fsc;

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-08-04 13:22:58 +02:00
Miklos Szeredi
e1e71c1688 fuse: fix use after free in fuse_read_interrupt()
There is a potential race between fuse_read_interrupt() and
fuse_request_end().

TASK1
  in fuse_read_interrupt(): delete req->intr_entry (while holding
  fiq->lock)

TASK2
  in fuse_request_end(): req->intr_entry is empty -> skip fiq->lock
  wake up TASK3

TASK3
  request is freed

TASK1
  in fuse_read_interrupt(): dereference req->in.h.unique ***BAM***


Fix by always grabbing fiq->lock if the request was ever interrupted
(FR_INTERRUPTED set) thereby serializing with concurrent
fuse_read_interrupt() calls.

FR_INTERRUPTED is set before the request is queued on fiq->interrupts.
Dequeing the request is done with list_del_init() but FR_INTERRUPTED is not
cleared in this case.

Reported-by: lijiazi <lijiazi@xiaomi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-08-04 13:22:58 +02:00
Rob Herring
aeaea8969b PCI: iproc: Fix BCMA probe resource handling
In commit 7ef1c871da ("PCI: iproc: Use
pci_parse_request_of_pci_ranges()"), calling
devm_request_pci_bus_resources() was dropped from the common iProc
probe code, but is still needed for BCMA bus probing. Without it, there
will be lots of warnings like this:

pci 0000:00:00.0: BAR 8: no space for [mem size 0x00c00000]
pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x00c00000]

Add back calling devm_request_pci_bus_resources() and adding the
resources to pci_host_bridge.windows for BCMA bus probe.

Link: https://lore.kernel.org/r/20210803215656.3803204-2-robh@kernel.org
Fixes: 7ef1c871da ("PCI: iproc: Use pci_parse_request_of_pci_ranges()")
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Roman Bacik <roman.bacik@broadcom.com>
Cc: Bharat Gooty <bharat.gooty@broadcom.com>
Cc: Abhishek Shah <abhishek.shah@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: Ray Jui <ray.jui@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: BCM Kernel Feedback <bcm-kernel-feedback-list@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
2021-08-04 12:20:00 +01:00
Rob Herring
d277f6e88c PCI: of: Don't fail devm_pci_alloc_host_bridge() on missing 'ranges'
Commit 669cbc7081 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()") made devm_pci_alloc_host_bridge() fail on
any DT resource parsing errors, but Broadcom iProc uses
devm_pci_alloc_host_bridge() on BCMA bus devices that don't have DT
resources. In particular, there is no 'ranges' property. Fix iProc by
making 'ranges' optional.

If 'ranges' is required by a platform, there's going to be more errors
latter on if it is missing.

Link: https://lore.kernel.org/r/20210803215656.3803204-1-robh@kernel.org
Fixes: 669cbc7081 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Roman Bacik <roman.bacik@broadcom.com>
Cc: Bharat Gooty <bharat.gooty@broadcom.com>
Cc: Abhishek Shah <abhishek.shah@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: Ray Jui <ray.jui@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: BCM Kernel Feedback <bcm-kernel-feedback-list@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-08-04 12:20:00 +01:00
Shaik Sajida Bhanu
67b13f3e22 mmc: sdhci-msm: Update the software timeout value for sdhc
Whenever SDHC run at clock rate 50MHZ or below, the hardware data
timeout value will be 21.47secs, which is approx. 22secs and we have
a current software timeout value as 10secs. We have to set software
timeout value more than the hardware data timeout value to avioid seeing
the below register dumps.

[  332.953670] mmc2: Timeout waiting for hardware interrupt.
[  332.959608] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[  332.966450] mmc2: sdhci: Sys addr:  0x00000000 | Version:  0x00007202
[  332.973256] mmc2: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000001
[  332.980054] mmc2: sdhci: Argument:  0x00000000 | Trn mode: 0x00000027
[  332.986864] mmc2: sdhci: Present:   0x01f801f6 | Host ctl: 0x0000001f
[  332.993671] mmc2: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
[  333.000583] mmc2: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[  333.007386] mmc2: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
[  333.014182] mmc2: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[  333.020976] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[  333.027771] mmc2: sdhci: Caps:      0x322dc8b2 | Caps_1:   0x0000808f
[  333.034561] mmc2: sdhci: Cmd:       0x0000183a | Max curr: 0x00000000
[  333.041359] mmc2: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[  333.048157] mmc2: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[  333.054945] mmc2: sdhci: Host ctl2: 0x00000000
[  333.059657] mmc2: sdhci: ADMA Err:  0x00000000 | ADMA Ptr:
0x0000000ffffff218
[  333.067178] mmc2: sdhci_msm: ----------- VENDOR REGISTER DUMP
-----------
[  333.074343] mmc2: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c | DLL cfg2: 0x0020a000
[  333.083417] mmc2: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00000000 | DDR cfg: 0x80040873
[  333.092850] mmc2: sdhci_msm: Vndr func: 0x00008a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
[  333.102371] mmc2: sdhci: ============================================

So, set software timeout value more than hardware timeout value.

Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1626435974-14462-1-git-send-email-sbhanu@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-04 13:17:21 +02:00
Christophe Kerello
d8e193f13b mmc: mmci: stm32: Check when the voltage switch procedure should be done
If the card has not been power cycled, it may still be using 1.8V
signaling. This situation is detected in mmc_sd_init_card function and
should be handled in mmci stm32 variant.  The host->pwr_reg variable is
also correctly protected with spin locks.

Fixes: 94b94a93e3 ("mmc: mmci_sdmmc: Implement signal voltage callbacks")
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210701143353.13188-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-04 12:46:02 +02:00
Vincent Whitchurch
25f8203b4b mmc: dw_mmc: Fix hang on data CRC error
When a Data CRC interrupt is received, the driver disables the DMA, then
sends the stop/abort command and then waits for Data Transfer Over.

However, sometimes, when a data CRC error is received in the middle of a
multi-block write transfer, the Data Transfer Over interrupt is never
received, and the driver hangs and never completes the request.

The driver sets the BMOD.SWR bit (SDMMC_IDMAC_SWRESET) when stopping the
DMA, but according to the manual CMD.STOP_ABORT_CMD should be programmed
"before assertion of SWR".  Do these operations in the recommended
order.  With this change the Data Transfer Over is always received
correctly in my tests.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210630102232.16011-1-vincent.whitchurch@axis.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-04 12:41:20 +02:00
David S. Miller
9c0532f9cc linux-can-next-for-5.15-20210804
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmEKaBUTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCpyVqK+u3vqSvgCACpR64hydl7/qt9QGnm9Ym6/v/L9y9v
 aBfZMQsedP1GSuev5PpxghXU4GF0LXiDr6ryr0hhu7w2ojjlLNl9sVHCF9qdAJKz
 x2D4YTlxct2KuPBdhWllQr/KWFbJh2IzarHEWzdo+QoU5A8jDlsK2kLeeikFECzT
 fVUe3mu1k66/DvHsetsfzIvbUkuHk2SPpK/pwrUC6Siw6wQZBHlSoUEtBNwEPlyH
 8+ZQJPqtrjr2v3mZUOkgHrlXEOZRu6OM3i1Yv2bn2x4VI+3KQHEw/cA1WNE2AOzN
 CfMp4sS98QdCrAboX4VJZpGAbziTFHedqFjjIP9ultCfH9ROHhQj4Zsl
 =37wt
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-next-for-5.15-20210804' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-08-04

this is a pull request of 5 patches for net-next/master.

The first patch is by me and fixes a typo in a comment in the CAN
J1939 protocol.

The next 2 patches are by Oleksij Rempel and update the CAN J1939
protocol to send RX status updates via the error queue mechanism.

The next patch is by me and adds a missing variable initialization to
the flexcan driver (the problem was introduced in the current net-next
cycle).

The last patch is by Aswath Govindraju and adds power-domains to the
Bosch m_can DT binding documentation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 11:30:09 +01:00
Linus Walleij
47adef20e6 pata: ixp4xx: Rewrite to use device tree
This rewrites the IXP4xx CF (IDE) libata driver to use the
device tree exclusively to look up its resources:

- Probe exclusively from the device tree and look up all
  resources from there.
- Allocate a local state container with devres and pass
  this around in .private_data.
- Initialize with struct ata_port_info.
- Use the .set_piomode() callback instead of the much
  wider .set_mode(), we only support PIO after all.
- Bump driver version number from 0.2 to 1.0 to reflect this
  wider change.
- Get a handle on the expansion bus syscon regmap to alter
  the timings on the chip select.
- Put in the more elaborate timing adjustment code for PIO0
  to PIO4 in 8 and 16bit mode from the downstream OpenWrt
  patch.

The board file initialization path and platform data include
is dropped because the board files will be deleted at the same
time as this patch is merged.

The platform data file is not deleted right now so as not to
conflict with the removal of board files.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:44 +02:00
Linus Walleij
be470496ee pata: ixp4xx: Add DT bindings
This adds device tree bindings for the Intel IXP4xx compact flash card
interface.

Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:37 +02:00
Linus Walleij
8e3d25a623 pata: ixp4xx: Refer to cmd and ctl rather than csN
The two "cs0" and "cs1" are "chip selects" but on some
platforms such as GW2358 they are actually both in CS3
making this terminology very confusing. Call the
addresses "cmd" and "ctl" after function instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:32 +02:00
Linus Walleij
d2b507acc6 pata: ixp4xx: Use IS_ENABLED() to determine endianness
Instead of an ARM-specific ifdef, use the global CPU config
and if (IS_ENABLED()).

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:27 +02:00
Linus Walleij
f62b38965a pata: ixp4xx: Use local dev variable
Let's simplify all &pdev->dev references by creating a
local struct device *dev variable.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:21 +02:00
Linus Walleij
21a0a29d16 watchdog: ixp4xx: Rewrite driver to use core
This rewrites the IXP4xx watchdog driver as follows:

- Spawn the watchdog driver as a platform device from the timer
  driver. It's one device in the hardware, and the fact that
  Linux splits the handling into two different devices is
  a Linux pecularity, and thus it becomes a Linux pecularity
  to spawn a separate watchdog driver.

- Spawn the watchdog driver from the timer driver at probe().
  This is well after the timer driver as actually registered and
  started and we know the register base is available.

- Instead of looping back callbacks to the timer drivers for all
  watchdog calls, pass the register base to the watchdog driver
  and manage the registers there. The two drivers aren't even
  interested in the same register so the spinlock is totally
  surplus, delete it.

- Replace pretty much all of the content in the watchdog driver
  with a simple, modern watchdog driver utilizing the watchdog
  core instead of registering its own misc device and ioctl()
  handling.

- Drop module parameters as the same already exist in the
  watchdog core.

What remains is a slim elegant (IMO) watchdog driver using the
watchdog core, spawning from device tree or boardfile alike.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:13 +02:00
Linus Walleij
1c953bda90 bus: ixp4xx: Add a driver for IXP4xx expansion bus
The Intel IXP4xx SoCs have an expansion bus that is usually just
used for flash memory and configured by the boot loaders and can
be accessed using the "simple-bus".

However some devices need more elaborate configuration and then we
need to provide a proper 3-unit address space indicating chip
select for each device and provide timing and similar information.

Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:20:06 +02:00
Linus Walleij
3fbcc6763b bus: ixp4xx: Add DT bindings for the IXP4xx expansion bus
This adds device tree bindings for the IXP4xx expansion bus controller.

Cc: Marc Zyngier <maz@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-04 12:19:58 +02:00
Aswath Govindraju
d85165b238 dt-bindings: net: can: Document power-domains property
Document power-domains property for adding the Power domain provider.

Link: https://lore.kernel.org/r/20210802091822.16407-1-a-govindraju@ti.com
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-04 12:11:57 +02:00
Marc Kleine-Budde
3362666972 can: flexcan: flexcan_clks_enable(): add missing variable initialization
This patch adds the missing initialization of the "err" variable in
the flexcan_clks_enable() function.

Fixes: d9cead75b1 ("can: flexcan: add mcf5441x support")
Link: https://lore.kernel.org/r/20210728075428.1493568-1-mkl@pengutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Cc: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-04 12:11:56 +02:00
Oleksij Rempel
5b9272e93f can: j1939: extend UAPI to notify about RX status
To be able to create applications with user friendly feedback, we need be
able to provide receive status information.

Typical ETP transfer may take seconds or even hours. To give user some
clue or show a progress bar, the stack should push status updates.
Same as for the TX information, the socket error queue will be used with
following new signals:
- J1939_EE_INFO_RX_RTS   - received and accepted request to send signal.
- J1939_EE_INFO_RX_DPO   - received data package offset signal
- J1939_EE_INFO_RX_ABORT - RX session was aborted

Instead of completion signal, user will get data package.
To activate this signals, application should set
SOF_TIMESTAMPING_RX_SOFTWARE to the SO_TIMESTAMPING socket option. This
will avoid unpredictable application behavior for the old software.

Link: https://lore.kernel.org/r/20210707094854.30781-3-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-04 12:11:52 +02:00
Oleksij Rempel
cd85d3aed5 can: j1939: rename J1939_ERRQUEUE_* to J1939_ERRQUEUE_TX_*
Prepare the world for the J1939_ERRQUEUE_RX_ version

Link: https://lore.kernel.org/r/20210707094854.30781-2-o.rempel@pengutronix.de
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-04 12:11:48 +02:00
Sean Christopherson
179c6c27bf KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB
Use the raw ASID, not ASID-1, when nullifying the last used VMCB when
freeing an SEV ASID.  The consumer, pre_sev_run(), indexes the array by
the raw ASID, thus KVM could get a false negative when checking for a
different VMCB if KVM manages to reallocate the same ASID+VMCB combo for
a new VM.

Note, this cannot cause a functional issue _in the current code_, as
pre_sev_run() also checks which pCPU last did VMRUN for the vCPU, and
last_vmentry_cpu is initialized to -1 during vCPU creation, i.e. is
guaranteed to mismatch on the first VMRUN.  However, prior to commit
8a14fe4f0c ("kvm: x86: Move last_cpu into kvm_vcpu_arch as
last_vmentry_cpu"), SVM tracked pCPU on its own and zero-initialized the
last_cpu variable.  Thus it's theoretically possible that older versions
of KVM could miss a TLB flush if the first VMRUN is on pCPU0 and the ASID
and VMCB exactly match those of a prior VM.

Fixes: 70cd94e60c ("KVM: SVM: VMRUN should use associated ASID when SEV is enabled")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-04 06:02:09 -04:00
Paolo Bonzini
85cd39af14 KVM: Do not leak memory for duplicate debugfs directories
KVM creates a debugfs directory for each VM in order to store statistics
about the virtual machine.  The directory name is built from the process
pid and a VM fd.  While generally unique, it is possible to keep a
file descriptor alive in a way that causes duplicate directories, which
manifests as these messages:

  [  471.846235] debugfs: Directory '20245-4' with parent 'kvm' already present!

Even though this should not happen in practice, it is more or less
expected in the case of KVM for testcases that call KVM_CREATE_VM and
close the resulting file descriptor repeatedly and in parallel.

When this happens, debugfs_create_dir() returns an error but
kvm_create_vm_debugfs() goes on to allocate stat data structs which are
later leaked.  The slow memory leak was spotted by syzkaller, where it
caused OOM reports.

Since the issue only affects debugfs, do a lookup before calling
debugfs_create_dir, so that the message is downgraded and rate-limited.
While at it, ensure kvm->debugfs_dentry is NULL rather than an error
if it is not created.  This fixes kvm_destroy_vm_debugfs, which was not
checking IS_ERR_OR_NULL correctly.

Cc: stable@vger.kernel.org
Fixes: 536a6f88c4 ("KVM: Create debugfs dir and stat files for each VM")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-04 06:02:03 -04:00
Like Xu
e79f49c37c KVM: x86/pmu: Introduce pmc->is_paused to reduce the call time of perf interfaces
Based on our observations, after any vm-exit associated with vPMU, there
are at least two or more perf interfaces to be called for guest counter
emulation, such as perf_event_{pause, read_value, period}(), and each one
will {lock, unlock} the same perf_event_ctx. The frequency of calls becomes
more severe when guest use counters in a multiplexed manner.

Holding a lock once and completing the KVM request operations in the perf
context would introduce a set of impractical new interfaces. So we can
further optimize the vPMU implementation by avoiding repeated calls to
these interfaces in the KVM context for at least one pattern:

After we call perf_event_pause() once, the event will be disabled and its
internal count will be reset to 0. So there is no need to pause it again
or read its value. Once the event is paused, event period will not be
updated until the next time it's resumed or reprogrammed. And there is
also no need to call perf_event_period twice for a non-running counter,
considering the perf_event for a running counter is never paused.

Based on this implementation, for the following common usage of
sampling 4 events using perf on a 4u8g guest:

  echo 0 > /proc/sys/kernel/watchdog
  echo 25 > /proc/sys/kernel/perf_cpu_time_max_percent
  echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
  echo 0 > /proc/sys/kernel/perf_cpu_time_max_percent
  for i in `seq 1 1 10`
  do
  taskset -c 0 perf record \
  -e cpu-cycles -e instructions -e branch-instructions -e cache-misses \
  /root/br_instr a
  done

the average latency of the guest NMI handler is reduced from
37646.7 ns to 32929.3 ns (~1.14x speed up) on the Intel ICX server.
Also, in addition to collecting more samples, no loss of sampling
accuracy was observed compared to before the optimization.

Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20210728120705.6855-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
2021-08-04 05:55:56 -04:00
Peter Xu
a75b540451 KVM: X86: Optimize zapping rmap
Using rmap_get_first() and rmap_remove() for zapping a huge rmap list could be
slow.  The easy way is to travers the rmap list, collecting the a/d bits and
free the slots along the way.

Provide a pte_list_destroy() and do exactly that.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210730220605.26377-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-04 05:55:56 -04:00
Peter Xu
13236e25eb KVM: X86: Optimize pte_list_desc with per-array counter
Add a counter field into pte_list_desc, so as to simplify the add/remove/loop
logic.  E.g., we don't need to loop over the array any more for most reasons.

This will make more sense after we've switched the array size to be larger
otherwise the counter will be a waste.

Initially I wanted to store a tail pointer at the head of the array list so we
don't need to traverse the list at least for pushing new ones (if without the
counter we traverse both the list and the array).  However that'll need
slightly more change without a huge lot benefit, e.g., after we grow entry
numbers per array the list traversing is not so expensive.

So let's be simple but still try to get as much benefit as we can with just
these extra few lines of changes (not to mention the code looks easier too
without looping over arrays).

I used the same a test case to fork 500 child and recycle them ("./rmap_fork
500" [1]), this patch further speeds up the total fork time of about 4%, which
is a total of 33% of vanilla kernel:

        Vanilla:      473.90 (+-5.93%)
        3->15 slots:  366.10 (+-4.94%)
        Add counter:  351.00 (+-3.70%)

[1] 825436f825

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210730220602.26327-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-04 05:55:56 -04:00
Peter Xu
dc1cff9691 KVM: X86: MMU: Tune PTE_LIST_EXT to be bigger
Currently rmap array element only contains 3 entries.  However for EPT=N there
could have a lot of guest pages that got tens of even hundreds of rmap entry.

A normal distribution of a 6G guest (even if idle) shows this with rmap count
statistics:

Rmap_Count:     0       1       2-3     4-7     8-15    16-31   32-63   64-127  128-255 256-511 512-1023
Level=4K:       3089171 49005   14016   1363    235     212     15      7       0       0       0
Level=2M:       5951    227     0       0       0       0       0       0       0       0       0
Level=1G:       32      0       0       0       0       0       0       0       0       0       0

If we do some more fork some pages will grow even larger rmap counts.

This patch makes PTE_LIST_EXT bigger so it'll be more efficient for the general
use case of EPT=N as we do list reference less and the loops over PTE_LIST_EXT
will be slightly more efficient; but still not too large so less waste when
array not full.

It should not affecting EPT=Y since EPT normally only has zero or one rmap
entry for each page, so no array is even allocated.

With a test case to fork 500 child and recycle them ("./rmap_fork 500" [1]),
this patch speeds up fork time of about 29%.

    Before: 473.90 (+-5.93%)
    After:  366.10 (+-4.94%)

[1] 825436f825

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210730220455.26054-6-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-04 05:55:56 -04:00
David S. Miller
d00551b402 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2021-08-04

1) Fix a sysbot reported memory leak in xfrm_user_rcv_msg.
   From Pavel Skripkin.

2) Revert "xfrm: policy: Read seqcount outside of rcu-read side
   in xfrm_policy_lookup_bytype". This commit tried to fix a
   lockin bug, but only cured some of the symptoms. A proper
   fix is applied on top of this revert.

3) Fix a locking bug on xfrm state hash resize. A recent change
   on sequence counters accidentally repaced a spinlock by a mutex.
   Fix from Frederic Weisbecker.

4) Fix possible user-memory-access in xfrm_user_rcv_msg_compat().
   From Dmitry Safonov.

5) Add initialiation sefltest fot xfrm_spdattr_type_t.
   From Dmitry Safonov.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:45:41 +01:00
David S. Miller
ff0ee9dfe8 Merge branch 'pegasus-errors'
Petko Manolov says:

====================
net: usb: pegasus: better error checking and DRIVER_VERSION removal

v3:

Pavel Skripkin again: make sure -ETIMEDOUT is returned by __mii_op() on timeout
condition;

v2:

Special thanks to Pavel Skripkin for the review and who caught a few bugs.
setup_pegasus_II() would not print an erroneous message on the success path.

v1:

Add error checking for get_registers() and derivatives.  If the usb transfer
fail then just don't use the buffer where the legal data should have been
returned.

Remove DRIVER_VERSION per Greg KH request.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:38:42 +01:00
Petko Manolov
bc65bacf23 net: usb: pegasus: Remove the changelog and DRIVER_VERSION.
These are now deemed redundant.

Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:38:42 +01:00
Petko Manolov
8a160e2e9a net: usb: pegasus: Check the return value of get_geristers() and friends;
Certain call sites of get_geristers() did not do proper error handling.  This
could be a problem as get_geristers() typically return the data via pointer to a
buffer.  If an error occurred the code is carelessly manipulating the wrong data.

Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:38:42 +01:00
Eric Dumazet
51b8f812e5 ipv6: exthdrs: get rid of indirect calls in ip6_parse_tlv()
As presented last month in our "BIG TCP" talk at netdev 0x15,
we plan using IPv6 jumbograms.

One of the minor problem we talked about is the fact that
ip6_parse_tlv() is currently using tables to list known tlvs,
thus using potentially expensive indirect calls.

While we could mitigate this cost using macros from
indirect_call_wrapper.h, we also can get rid of the tables
and let the compiler emit optimized code.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Justin Iurman <justin.iurman@uliege.be>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:34:40 +01:00
Johan Hovold
3212a99349 USB: serial: pl2303: fix GT type detection
At least some PL2303GT have a bcdDevice of 0x305 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.

Fixes: 894758d057 ("USB: serial: pl2303: tighten type HXN (G) detection")
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: stable@vger.kernel.org	# 5.13
Link: https://lore.kernel.org/r/20210804093100.24811-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-08-04 11:33:10 +02:00
David S. Miller
d851798584 Merge branch 'm7530-sw-fallback'
DENG Qingfang says:

====================
mt7530 software fallback bridging fix

DSA core has gained software fallback support since commit 2f5dc00f7a,
but it does not work properly on mt7530. This patch series fixes the
issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:30:00 +01:00
DENG Qingfang
73c447cacb net: dsa: mt7530: always install FDB entries with IVL and FID 1
This reverts commit 7e77702178 ("mt7530 mt7530_fdb_write only set ivl
bit vid larger than 1").

Before this series, the default value of all ports' PVID is 1, which is
copied into the FDB entry, even if the ports are VLAN unaware. So
`bridge fdb show` will show entries like `dev swp0 vlan 1 self` even on
a VLAN-unaware bridge.

The blamed commit does not solve that issue completely, instead it may
cause a new issue that FDB is inaccessible in a VLAN-aware bridge with
PVID 1.

This series sets PVID to 0 on VLAN-unaware ports, so `bridge fdb show`
will no longer print `vlan 1` on VLAN-unaware bridges, and that special
case in fdb_write is not required anymore.

Set FDB entries' filter ID to 1 to match the VLAN table.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:30:00 +01:00
DENG Qingfang
a9e3f62dff net: dsa: mt7530: set STP state on filter ID 1
As filter ID 1 is the only one used for bridges, set STP state on it.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:30:00 +01:00
DENG Qingfang
6087175b79 net: dsa: mt7530: use independent VLAN learning on VLAN-unaware bridges
Consider the following bridge configuration, where bond0 is not
offloaded:

         +-- br0 --+
        / /   |     \
       / /    |      \
      /  |    |     bond0
     /   |    |     /   \
   swp0 swp1 swp2 swp3 swp4
     .        .       .
     .        .       .
     A        B       C

Ideally, when the switch receives a packet from swp3 or swp4, it should
forward the packet to the CPU, according to the port matrix and unknown
unicast flood settings.

But packet loss will happen if the destination address is at one of the
offloaded ports (swp0~2). For example, when client C sends a packet to
A, the FDB lookup will indicate that it should be forwarded to swp0, but
the port matrix of swp3 and swp4 is configured to only allow the CPU to
be its destination, so it is dropped.

However, this issue does not happen if the bridge is VLAN-aware. That is
because VLAN-aware bridges use independent VLAN learning, i.e. use VID
for FDB lookup, on offloaded ports. As swp3 and swp4 are not offloaded,
shared VLAN learning with default filter ID of 0 is used instead. So the
lookup for A with filter ID 0 never hits and the packet can be forwarded
to the CPU.

In the current code, only two combinations were used to toggle user
ports' VLAN awareness: one is PCR.PORT_VLAN set to port matrix mode with
PVC.VLAN_ATTR set to transparent port, the other is PCR.PORT_VLAN set to
security mode with PVC.VLAN_ATTR set to user port.

It turns out that only PVC.VLAN_ATTR contributes to VLAN awareness, and
port matrix mode just skips the VLAN table lookup. The reference manual
is somehow misleading when describing PORT_VLAN modes. It states that
PORT_MEM (VLAN port member) is used for destination if the VLAN table
lookup hits, but actually **PORT_MEM & PORT_MATRIX** (bitwise AND of
VLAN port member and port matrix) is used instead, which means we can
have two or more separate VLAN-aware bridges with the same PVID and
traffic won't leak between them.

Therefore, to solve this, enable independent VLAN learning with PVID 0
on VLAN-unaware bridges, by setting their PCR.PORT_VLAN to fallback
mode, while leaving standalone ports in port matrix mode. The CPU port
is always set to fallback mode to serve those bridges.

During testing, it is found that FDB lookup with filter ID of 0 will
also hit entries with VID 0 even with independent VLAN learning. To
avoid that, install all VLANs with filter ID of 1.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:30:00 +01:00
DENG Qingfang
0b69c54c74 net: dsa: mt7530: enable assisted learning on CPU port
Consider the following bridge configuration, where bond0 is not
offloaded:

         +-- br0 --+
        / /   |     \
       / /    |      \
      /  |    |     bond0
     /   |    |     /   \
   swp0 swp1 swp2 swp3 swp4
     .        .       .
     .        .       .
     A        B       C

Address learning is enabled on offloaded ports (swp0~2) and the CPU
port, so when client A sends a packet to C, the following will happen:

1. The switch learns that client A can be reached at swp0.
2. The switch probably already knows that client C can be reached at the
   CPU port, so it forwards the packet to the CPU.
3. The bridge core knows client C can be reached at bond0, so it
   forwards the packet back to the switch.
4. The switch learns that client A can be reached at the CPU port.
5. The switch forwards the packet to either swp3 or swp4, according to
   the packet's tag.

That makes client A's MAC address flap between swp0 and the CPU port. If
client B sends a packet to A, it is possible that the packet is
forwarded to the CPU. With offload_fwd_mark = 1, the bridge core won't
forward it back to the switch, resulting in packet loss.

As we have the assisted_learning_on_cpu_port in DSA core now, enable
that and disable hardware learning on the CPU port.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <oltean@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:30:00 +01:00
David S. Miller
8eceea4134 Merge branch 'ipa-pm-irqs'
Alex Elder says:

====================
net: ipa: prepare GSI interrupts for runtime PM

The last patch in this series arranges for GSI interrupts to be
disabled when the IPA hardware is suspended.  This ensures the clock
is always operational when a GSI interrupt fires.  Leading up to
that are patches that rearrange the code a bit to allow this to
be done.

The first two patches aren't *directly* related.  They remove some
flag arguments to some GSI suspend/resume related functions, using
the version field now present in the GSI structure.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:12:05 +01:00
Alex Elder
45a42a3c50 net: ipa: disable GSI interrupts while suspended
Introduce new functions gsi_suspend() and gsi_resume(), which will
disable the GSI interrupt handler after all endpoints are suspended
and re-enable it before endpoints are resumed.  This will ensure no
GSI interrupt handler will fire when the hardware is suspended.

Here's a little further explanation.  There are seven GSI interrupt
types, and most are disabled except when needed.
  - These two are not used (never enabled):
      GSI_INTER_EE_CH_CTRL
      GSI_INTER_EE_EV_CTRL
  - These two are only used to implement channel and event ring
    commands, and are only enabled while a command is underway:
      GSI_CH_CTRL
      GSI_EV_CTRL
  - The IEOB interrupt signals I/O completion.  It will not fire
    when a channel is stopped (or "suspended").
      GSI_IEOB
  - This interrupt is used to allocate or halt modem channels,
    and is only enabled while such a command is underway.
      GSI_GLOB_EE
    However it also is used to signal certain errors, and this could
    occur at any time.
  - The general interrupt signals general errors, and could occur at
    any time.
      GSI_GENERAL

The purpose for this change is to ensure no global or general
interrupts fire due to errors while the hardware is suspended.
We enable the clock on resume, and at that time we can "handle"
(at least report) these error conditions.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:12:05 +01:00
Alex Elder
b176f95b57 net: ipa: move gsi_irq_init() code into setup
The GSI IRQ handler could be triggered as soon as it is registered
with request_irq().  The handler function, gsi_isr(), touches
hardware, meaning the IPA clock must be operational.  The IPA clock
is not operating when the handler is registered (in gsi_irq_init()),
so this is a problem.

Move the call to request_irq() for the GSI interrupt handler into
gsi_irq_setup(), which is called when the IPA clock is known to be
operational (and furthermore, the GSI firmware will have been
loaded).  Request the IRQ at the end of that function, after all
interrupt types have been disabled and masked.

Move the matching free_irq() call into gsi_irq_teardown(), and get
rid of the now empty gsi_irq_exit(),

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:12:05 +01:00
Alex Elder
1657d8a458 net: ipa: have gsi_irq_setup() return an error code
Change gsi_irq_setup() so it returns an error value, and introduce
gsi_irq_teardown() as its inverse.  Set the interrupt type (IRQ
rather than MSI) in gsi_irq_setup().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:12:05 +01:00
Alex Elder
a7860a5f89 net: ipa: move some GSI setup functions
Move gsi_irq_setup() and gsi_ring_setup() so they're defined right
above gsi_setup() where they're called.  This is a trivial movement
of code to prepare for upcoming patches.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:12:05 +01:00
Alex Elder
4a4ba483e4 net: ipa: move version check for channel suspend/resume
Change the Boolean flags passed to __gsi_channel_start() and
__gsi_channel_stop() so they represent whether the request is being
made to implement suspend (versus stop) or resume (versus start).

Then stop or start the channel for suspend/resume requests only if
the hardware version indicates it should be done.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:12:05 +01:00
Alex Elder
decfef0fa6 net: ipa: use gsi->version for channel suspend/resume
The GSI layer has the IPA version now, so there's no need for
version-specific flags to be passed from IPA.  One instance of
this is in gsi_channel_suspend() and gsi_channel_resume(), which
indicate whether or not the endpoint suspend is implemented by
GSI stopping the channel.  We can make that determination based
on gsi->version, eliminating the need for a Boolean flag in those
functions.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:12:05 +01:00
David S. Miller
93bbcfee05 Merge branch 'mhi-mbim'
Loic Poulain says:

====================
net: mhi: move MBIM to WWAN

Implement a proper WWAN driver for MBIM network protocol, with multi link
management supported through the WWAN framework (wwan rtnetlink).

Until now, MBIM over MHI was supported directly in the mhi_net driver, via
some protocol rx/tx fixup callbacks, but with only one session supported
(no multilink muxing). We can then remove that part from mhi_net and restore
the driver to a simpler version for 'raw' ip transfer (or QMAP via rmnet link).

Note that a wwan0 link is created by default for session-id 0. Additional links
can be managed via ip tool:

    $ ip link add dev wwan0mms parentdev wwan0 type wwan linkid 1
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:10:12 +01:00
Loic Poulain
7ffa7542ec net: mhi: Remove MBIM protocol
The MBIM protocol has now been integrated in a proper WWAN driver. We
can then revert back to a simpler driver for mhi_net, which is used
for raw IP or QMAP protocol (via rmnet link).

- Remove protocol management
- Remove WWAN framework usage (only valid for mbim)
- Remove net/mhi directory for simpler mhi_net.c file

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:10:12 +01:00
Loic Poulain
aa730a9905 net: wwan: Add MHI MBIM network driver
Add new wwan driver for MBIM over MHI. MBIM is a transport protocol
for IP packets, allowing packet aggregation and muxing. Initially
designed for USB bus, it is also exposed through MHI bus for QCOM
based PCIe wwan modems.

This driver supports the new wwan rtnetlink interface for multi-link
management and has been tested with Quectel EM120R-GL M2 module.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:10:12 +01:00
David S. Miller
8730379ee0 Merge branch 'queues'
Jakub Kicinski says:

====================
net: add netif_set_real_num_queues() for device reconfig

This short set adds a helper to make the implementation of
two-phase NIC reconfig easier.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:05:13 +01:00
Jakub Kicinski
e874f4557b nfp: use netif_set_real_num_queues()
Avoid reconfig problems due to failures in netif_set_real_num_tx_queues()
by using netif_set_real_num_queues().

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:05:13 +01:00
Jakub Kicinski
271e5b7d00 net: add netif_set_real_num_queues() for device reconfig
netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues()
can fail which breaks drivers trying to implement reconfiguration
in a way that can't leave the device half-broken. In other words
those functions are incompatible with prepare/commit approach.

Luckily setting real number of queues can fail only if the number
is increased, meaning that if we order operations correctly we
can guarantee ending up with either new config (success), or
the old one (on error).

Provide a helper implementing such logic so that drivers don't
have to duplicate it.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04 10:05:13 +01:00