Commit graph

1,059,104 commits

Author SHA1 Message Date
Sean Christopherson
df37ed38e6 KVM: x86: Flush the guest's TLB on INIT
Flush the guest's TLB on INIT, as required by Intel's SDM.  Although
AMD's APM states that the TLBs are unchanged by INIT, it's not clear that
that's correct as the APM also states that the TLB is flush on "External
initialization of the processor."  Regardless, relying on the guest to be
paranoid is unnecessarily risky, while an unnecessary flush is benign
from a functional perspective and likely has no measurable impact on
guest performance.

Note, as of the April 2021 version of Intels' SDM, it also contradicts
itself with respect to TLB flushing.  The overview of INIT explicitly
calls out the TLBs as being invalidated, while a table later in the same
section says they are unchanged.

  9.1 INITIALIZATION OVERVIEW:
    The major difference is that during an INIT, the internal caches, MSRs,
    MTRRs, and x87 FPU state are left unchanged (although, the TLBs and BTB
    are invalidated as with a hardware reset)

  Table 9-1:

  Register                    Power up    Reset      INIT
  Data and Code Cache, TLBs:  Invalid[6]  Invalid[6] Unchanged

Given Core2's erratum[*] about global TLB entries not being flush on INIT,
it's safe to assume that the table is simply wrong.

  AZ28. INIT Does Not Clear Global Entries in the TLB
  Problem: INIT may not flush a TLB entry when:
    • The processor is in protected mode with paging enabled and the page global enable
      flag is set (PGE bit of CR4 register)
    • G bit for the page table entry is set
    • TLB entry is present in TLB when INIT occurs
    • Software may encounter unexpected page fault or incorrect address translation due
      to a TLB entry erroneously left in TLB after INIT.

  Workaround: Write to CR3, CR4 (setting bits PSE, PGE or PAE) or CR0 (setting
              bits PG or PE) registers before writing to memory early in BIOS
              code to clear all the global entries from TLB.

  Status: For the steppings affected, see the Summary Tables of Changes.

[*] https://www.intel.com/content/dam/support/us/en/documents/processors/mobile/celeron/sb/320121.pdf

Fixes: 6aa8b732ca ("[PATCH] kvm: userspace interface")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:48 -04:00
Maxim Levitsky
df63202fe5 KVM: x86: APICv: drop immediate APICv disablement on current vCPU
Special case of disabling the APICv on the current vCPU right away in
kvm_request_apicv_update doesn't bring much benefit vs raising
KVM_REQ_APICV_UPDATE on it instead, since this request will be processed
on the next entry to the guest.
(the comment about having another #VMEXIT is wrong).

It also hides various assumptions that APIVc enable state matches
the APICv inhibit state, as this special case only makes those states
match on the current vCPU.

Previous patches fixed few such assumptions so now it should be safe
to drop this special case.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:48 -04:00
Paolo Bonzini
71ba3f3189 KVM: x86: enable TDP MMU by default
With the addition of fast page fault support, the TDP-specific MMU has reached
feature parity with the original MMU.  All my testing in the last few months
has been done with the TDP MMU; switch the default on 64-bit machines.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:48 -04:00
David Matlack
6e8eb2060c KVM: x86/mmu: fast_page_fault support for the TDP MMU
Make fast_page_fault interoperate with the TDP MMU by leveraging
walk_shadow_page_lockless_{begin,end} to acquire the RCU read lock and
introducing a new helper function kvm_tdp_mmu_fast_pf_get_last_sptep to
grab the lowest level sptep.

Suggested-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:47 -04:00
David Matlack
c5c8c7c530 KVM: x86/mmu: Make walk_shadow_page_lockless_{begin,end} interoperate with the TDP MMU
Acquire the RCU read lock in walk_shadow_page_lockless_begin and release
it in walk_shadow_page_lockless_end when the TDP MMU is enabled.  This
should not introduce any functional changes but is used in the following
commit to make fast_page_fault interoperate with the TDP MMU.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-4-dmatlack@google.com>
[Use if...else instead of if(){return;}]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:47 -04:00
David Matlack
61bcd360aa KVM: x86/mmu: Fix use of enums in trace_fast_page_fault
Enum values have to be exported to userspace since the formatting is not
done in the kernel. Without doing this perf maps RET_PF_FIXED and
RET_PF_SPURIOUS to 0, which results in incorrect output:

  $ perf record -a -e kvmmmu:fast_page_fault --filter "ret==3" -- ./access_tracking_perf_test
  $ perf script | head -1
   [...] new 610006048d25877 spurious 0 fixed 0  <------ should be 1

Fix this by exporting the enum values to userspace with TRACE_DEFINE_ENUM.

Fixes: c4371c2a68 ("KVM: x86/mmu: Return unique RET_PF_* values if the fault was fixed")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:47 -04:00
David Matlack
76cd325ea7 KVM: x86/mmu: Rename cr2_or_gpa to gpa in fast_page_fault
fast_page_fault is only called from direct_page_fault where we know the
address is a gpa.

Fixes: 736c291c9f ("KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM")
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:46 -04:00
Peter Xu
605c713023 KVM: Introduce kvm_get_kvm_safe()
Introduce this safe version of kvm_get_kvm() so that it can be called even
during vm destruction.  Use it in kvm_debugfs_open() and remove the verbose
comment.  Prepare to be used elsewhere.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210625153214.43106-3-peterx@redhat.com>
[Preserve the comment in kvm_debugfs_open. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:46 -04:00
Juergen Gross
1694caef42 x86/kvm: remove non-x86 stuff from arch/x86/kvm/ioapic.h
The file has been moved to arch/x86 long time ago. Time to get rid of
non-x86 stuff.

Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <20210701154105.23215-3-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 11:01:46 -04:00
Joerg Roedel
1d65b90847 Merge remote-tracking branch 'korg/core' into x86/amd 2021-08-02 17:00:28 +02:00
Xiang Chen
9eec3f9b9e iommu/arm-smmu-v3: Implement the map_pages() IOMMU driver callback
Implement the map_pages() callback for ARM SMMUV3 driver to allow calls
from iommu_map to map multiple pages of the same size in one call.
Also remove the map() callback for the ARM SMMUV3 driver as it will no
longer be used.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1627697831-158822-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-02 16:52:55 +02:00
Xiang Chen
59103c79f4 iommu/arm-smmu-v3: Implement the unmap_pages() IOMMU driver callback
Implement the unmap_pages() callback for ARM SMMUV3 driver to allow calls
from iommu_unmap to unmap multiple pages of the same size in one call.
Also remove the unmap() callback for the ARM SMMUV3 driver as it will
no longer be used.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1627697831-158822-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-02 16:52:55 +02:00
Colin Ian King
ea9df9840f
ASoC: tlv320aic32x4: make array clocks static, makes object smaller
Don't populate the array clocks on the stack but instead it
static. Makes the object code smaller by 316 bytes.

Before:
   text    data     bss     dec     hex filename
  63668   28264       0   91932   1671c ./sound/soc/codecs/tlv320aic32x4.o

After:
   text    data     bss     dec     hex filename
  62616   29000       0   91616   165e0 ./sound/soc/codecs/tlv320aic32x4.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210801064807.138641-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:47:49 +01:00
Hans de Goede
780feaf4ad
ASoC: Intel: bytcr_rt5640: Fix HP ElitePad 1000 G2 quirk
The HP Elitepad 1000 G2 has 2 headset jacks:

1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.

2. on the tablet itself, this uses the line-out of the codec, combined
with an external HP-amp + IN1 for the headset-mic.

Fix the HP ElitePad 1000 G2 to properly reflect this now that the
machine-driver supports this setup.

Note this also changes the mapping for the internal mic. from
IN1 (which was pointing to the 2nd headset-jack mic) to DMIC2
which is the actual input for the internal mics.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:47:47 +01:00
Hans de Goede
79c1123bac
ASoC: Intel: bytcr_rt5640: Add support for a second headset mic input
Some devices (HP Elitepad 1000 G2) have 2 headset jacks (1 on the dock,
2nd on the tablet itself). The 2nd headset mic input on these is
connected to in1 (the internal mics on the HP Elitepad 1000 G2 use DMIC2).

Add support for this through a new BYT_RT5640_HSMIC2_ON_IN1 quirk.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:47:46 +01:00
Hans de Goede
044c765712
ASoC: Intel: bytcr_rt5640: Add support for a second headphones output
Some devices (HP Elitepad 1000 G2) have a second headphones output
(1 on the dock, 2nd on the tablet itself) which is implemented through
the line-out output of the codec combined with an external hp-amp
which gets enabled through the codec's GPIO1 pin.

Add support for this through a new BYT_RT5640_LINEOUT_AS_HP2 quirk,
note users are expected to use this combined with the
BYT_RT5640_LINEOUT quirk. If that quirk is not set the new quirk is
ignored.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:47:45 +01:00
Hans de Goede
8107114074
ASoC: Intel: bytcr_rt5640: Add a byt_rt5640_get_codec_dai() helper
Add a byt_rt5640_get_codec_dai() helper, which gets the codec_dai
from a dapm_context.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:47:44 +01:00
Hans de Goede
dd3e202510
ASoC: Intel: bytcr_rt5640: Add line-out support
Add support for boards which use the codecs Line Out output, this can
be enabled by using the newly added BYT_RT5640_LINEOUT quirk.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:47:42 +01:00
Hans de Goede
dccd1dfd07
ASoC: Intel: bytcr_rt5640: Move "Platform Clock" routes to the maps for the matching in-/output
Move the "Platform Clock" routes for the "Internal Mic" and "Speaker"
routes to the intmic_*_map[] / *_spk_map[] arrays.

This ensures that these "Platform Clock" routes do not get added when the
BYT_RT5640_NO_INTERNAL_MIC_MAP / BYT_RT5640_NO_SPEAKERS quirks are used.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210802142501.991985-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:47:41 +01:00
Bard Liao
60e9feb781
soundwire: intel: introduce shim and alh base
shim base and alh base are platform-dependent. Adding these two
parameters allows us to use different shim/alh base for each
platform.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210723115451.7245-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:45:42 +01:00
Bard Liao
198fa4bcf6
ASoC: SOF: intel: add snd_sof_dsp_check_sdw_irq ops
SoundWire IRQ status checks are platform-dependent, add new ops structure
to provide abstraction.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210723115451.7245-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:45:40 +01:00
Bard Liao
2f1315ae94
ASoC: SOF: intel: move sof_intel_dsp_desc() forward
sof_intel_dsp_desc() will be used by hda_dsp_check_sdw_irq() in the
following commit.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210723115451.7245-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:45:39 +01:00
Bard Liao
781dd3c822
ASoC: SOF: intel: hda: remove HDA_DSP_REG_SNDW_WAKE_STS definition
HDA_DSP_REG_SNDW_WAKE_STS is actually (SDW_SHIM_BASE + SDW_SHIM_WAKESTS)
and SDW_SHIM_BASE is platform-dependent. Removing HDA_DSP_REG_SNDW_WAKE_STS
and use (hdev->desc->sdw_shim_base + SDW_SHIM_WAKESTS) instead.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210723115451.7245-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:45:37 +01:00
Bard Liao
1cbf6443f0
ASoC: SOF: intel: add sdw_shim/alh_base to sof_intel_dsp_desc
sdw_shim_base and sdw_alh_base are platform-dependent. This change allow
us to define different sdw shim/alh base for each platform.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210723115451.7245-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:45:35 +01:00
Bard Liao
f01639589e
soundwire: move intel sdw register definitions to sdw_intel.h
Those Intel sdw registers will be used by ASoC SOF drivers in the
following commits. So move those definitions to sdw_intel.h and it can
be visible to SOF drivers.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210723115451.7245-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02 15:45:34 +01:00
Mark Brown
170c0d7460
Merge series "ASoC: soc-topology: cleanup cppcheck warning" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark

Now I'm posting audio-graph-card2 patch-set, but it seems it needs longer
discussion. Thus I want to post more easy patch first, and reduce my
local patches.

These are cppcheck warning cleanup patches for soc-topology.

Kuninori Morimoto (5):
  ASoC: soc-topology: cleanup cppcheck warning at soc_tplg_process_headers()
  ASoC: soc-topology: cleanup cppcheck warning at soc_tplg_dai_elems_load()
  ASoC: soc-topology: cleanup cppcheck warning at soc_tplg_dapm_widget_elems_load()
  ASoC: soc-topology: cleanup cppcheck warning at soc_tplg_kcontrol_elems_load()
  ASoC: soc-topology: cleanup cppcheck warning at snd_soc_find_dai_link()

 sound/soc/soc-topology.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

--
2.25.1
2021-08-02 15:42:31 +01:00
Thomas Zimmermann
50fff206c5 drm/vkms: Map output framebuffer BOs with drm_gem_fb_vmap()
Abstract the framebuffer details by mappings its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunamp().

Before, the output address with stored as raw pointer in the priv
field of struct drm_writeback_job. Introduce the new type
struct vkms_writeback_job, which holds the output mappings addresses
while the writeback job is active.

The patchset also cleans up some internal casting an setup of the
output addresses. No functional changes.

v3:
	* free instances of struct vkms_writeback_job on cleanup
	  or errors

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-6-tzimmermann@suse.de
2021-08-02 16:41:20 +02:00
Thomas Zimmermann
0029d31829 drm/gud: Map framebuffer BOs with drm_gem_fb_vmap()
Abstract the framebuffer details by mapping its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunmap().

The call to drm_gem_fb_vmap() ensures that all BOs are mapped
correctly. Gud still only supports single-plane formats.

No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-5-tzimmermann@suse.de
2021-08-02 16:41:20 +02:00
Thomas Zimmermann
0ec77bd92b drm/gem: Clear mapping addresses for unused framebuffer planes
Set the returned mapping address to NULL if a framebuffer plane does
not have a BO associated with it. Likewise, ignore mappings of NULL
during framebuffer unmap operations. Allows users of the functions to
perform unmap operations of certain BOs by themselfes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-4-tzimmermann@suse.de
2021-08-02 16:41:20 +02:00
Thomas Zimmermann
f6424ecdb3 drm/gem: Provide drm_gem_fb_{vmap,vunmap}()
Move framebuffer vmap code from shadow-buffered plane state into the new
interfaces drm_gem_fb_vmap() and drm_gem_fb_vunmap(). These functions
provide mappings of a framebuffer's BOs into kernel address space. No
functional changes.

v4:
	* remove duplicated blank line
v2:
	* using [static N] for array parameters enables compile-time checks
	* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES (kernel
	  test robot)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-3-tzimmermann@suse.de
2021-08-02 16:41:20 +02:00
Thomas Zimmermann
279cc2e954 drm: Define DRM_FORMAT_MAX_PLANES
DRM uses a magic number of 4 for the maximum number of planes per color
format. Declare this constant via DRM_FORMAT_MAX_PLANES and update the
related code. Some code depends on the length of arrays that are now
declared with DRM_FORMAT_MAX_PLANES. Convert it from '4' to ARRAY_SIZE.

v2:
	* mention usage of ARRAY_SIZE() in the commit message (Maxime)
	* also fix error handling in drm_gem_fb_init_with_funcs()
	  (kernel test robot)
	* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-2-tzimmermann@suse.de
2021-08-02 16:41:20 +02:00
Vidya Sagar
bf2942a8b7 arm64: tegra: Fix Tegra194 PCIe EP compatible string
The initialization sequence performed by the generic platform driver
pcie-designware-plat.c for a DWC based implementation doesn't work for
Tegra194. Tegra194 has a different initialization sequence requirement
which can only be satisfied by the Tegra194 specific platform driver
pcie-tegra194.c. So, remove the generic compatible string "snps,dw-pcie-ep"
from Tegra194's endpoint controller nodes.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-02 16:32:15 +02:00
Greg Kroah-Hartman
11e14fc3e4 Revert "staging: r8188eu: remove rtw_buf_free() function"
This reverts commit c7e88ecbe3 as it's
broken because somehow I forgot how pointers work...

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-02 16:30:39 +02:00
Jakub Kicinski
1c69d7cf4a Revert "mhi: Fix networking tree build."
This reverts commit 40e1594038.

Looks like this commit breaks the build for me.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02 07:30:29 -07:00
Frank Wunderlich
5aa95d8834 iommu: Check if group is NULL before remove device
If probe_device is failing, iommu_group is not initialized because
iommu_group_add_device is not reached, so freeing it will result
in NULL pointer access.

iommu_bus_init
  ->bus_iommu_probe
      ->probe_iommu_group in for each:/* return -22 in fail case */
          ->iommu_probe_device
              ->__iommu_probe_device       /* return -22 here.*/
                  -> ops->probe_device          /* return -22 here.*/
                  -> iommu_group_get_for_dev
                        -> ops->device_group
                        -> iommu_group_add_device //good case
  ->remove_iommu_group  //in fail case, it will remove group
     ->iommu_release_device
         ->iommu_group_remove_device // here we don't have group

In my case ops->probe_device (mtk_iommu_probe_device from
mtk_iommu_v1.c) is due to failing fwspec->ops mismatch.

Fixes: d72e31c937 ("iommu: IOMMU Groups")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20210731074737.4573-1-linux@fw-web.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-02 16:22:00 +02:00
Gustavo A. R. Silva
2d3e5caf96 net/ipv4: Replace one-element array with flexible-array member
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Use an anonymous union with a couple of anonymous structs in order to
keep userspace unchanged:

$ pahole -C ip_msfilter net/ipv4/ip_sockglue.o
struct ip_msfilter {
	union {
		struct {
			__be32     imsf_multiaddr_aux;   /*     0     4 */
			__be32     imsf_interface_aux;   /*     4     4 */
			__u32      imsf_fmode_aux;       /*     8     4 */
			__u32      imsf_numsrc_aux;      /*    12     4 */
			__be32     imsf_slist[1];        /*    16     4 */
		};                                       /*     0    20 */
		struct {
			__be32     imsf_multiaddr;       /*     0     4 */
			__be32     imsf_interface;       /*     4     4 */
			__u32      imsf_fmode;           /*     8     4 */
			__u32      imsf_numsrc;          /*    12     4 */
			__be32     imsf_slist_flex[0];   /*    16     0 */
		};                                       /*     0    16 */
	};                                               /*     0    20 */

	/* size: 20, cachelines: 1, members: 1 */
	/* last cacheline: 20 bytes */
};

Also, refactor the code accordingly and make use of the struct_size()
and flex_array_size() helpers.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:17:28 +01:00
Jakub Kicinski
7a7b8635b6 docs: operstates: document IF_OPER_TESTING
IF_OPER_TESTING is in fact used today.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:16:04 +01:00
Jakub Kicinski
66e0da2172 docs: operstates: fix typo
TVL -> TLV

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:15:32 +01:00
Jakub Kicinski
6387f65e2a net: sparx5: fix compiletime_assert for GCC 4.9
Stephen reports sparx5 broke GCC 4.9 build.
Move the compiletime_assert() out of the static function.
Compile-tested only, no object code changes.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:14:15 +01:00
Vladimir Oltean
29a097b774 net: dsa: remove the struct packet_type argument from dsa_device_ops::rcv()
No tagging driver uses this.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:13:15 +01:00
Krzysztof Kozlowski
35d7a6f1fb nfc: hci: pass callback data param as pointer in nci_request()
The nci_request() receives a callback function and unsigned long data
argument "opt" which is passed to the callback.  Almost all of the
nci_request() callers pass pointer to a stack variable as data argument.
Only few pass scalar value (e.g. u8).

All such callbacks do not modify passed data argument and in previous
commit they were made as const.  However passing pointers via unsigned
long removes the const annotation.  The callback could simply cast
unsigned long to a pointer to writeable memory.

Use "const void *" as type of this "opt" argument to solve this and
prevent modifying the pointed contents.  This is also consistent with
generic pattern of passing data arguments - via "void *".  In few places
which pass scalar values, use casts via "unsigned long" to suppress any
warnings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:11:37 +01:00
Christophe JAILLET
1e0dd56e96 cavium: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below. It has been
hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.

It has been compile tested.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:10:39 +01:00
Wang Hai
7fe74dfd41 net: natsemi: Fix missing pci_disable_device() in probe and remove
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:09:52 +01:00
Steve Bennett
a5e63c7d38 net: phy: micrel: Fix detection of ksz87xx switch
The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect
such that the that KSZ87XX switch is not identified correctly.

ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id
to discriminate whether it was called from ksz8051_match_phy_device()
or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the
same value as PHY_ID_KSZ8051, this doesn't work.

Instead use a bool to discriminate the caller.

Without this patch, the KSZ8795 switch port identifies as:

ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY]

With the patch, it identifies correctly:

ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch]

Fixes: 8b95599c55 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs")
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:07:49 +01:00
Vladimir Oltean
244f8a8029 net: dsa: mt7530: drop paranoid checks in .get_tag_protocol()
It is desirable to reduce the surface of DSA_TAG_PROTO_NONE as much as
we can, because we now have options for switches without hardware
support for DSA tagging, and the occurrence in the mt7530 driver is in
fact quite gratuitout and easy to remove. Since ds->ops->get_tag_protocol()
is only called for CPU ports, the checks for a CPU port in
mtk_get_tag_protocol() are redundant and can be removed.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02 15:06:55 +01:00
Xiu Jianfeng
4c156084da selinux: correct the return value when loads initial sids
It should not return 0 when SID 0 is assigned to isids.
This patch fixes it.

Cc: stable@vger.kernel.org
Fixes: e3e0b582c3 ("selinux: remove unused initial SIDs and improve handling")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
[PM: remove changelog from description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-08-02 09:59:50 -04:00
Jason Wang
013cc4c678 KVM: arm64: Fix comments related to GICv2 PMR reporting
Remove the repeated word 'the' from two comments.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210728130623.12017-1-wangborong@cdjrlc.com
2021-08-02 14:49:39 +01:00
Paolo Bonzini
38f703663d KVM: arm64: Count VMID-wide TLB invalidations
KVM/ARM has an architecture-specific implementation of
kvm_flush_remote_tlbs; however, unlike the generic one,
it does not count the flushes in kvm->stat.remote_tlb_flush,
so that it inexorably remained stuck to zero.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210727103251.16561-1-pbonzini@redhat.com
2021-08-02 14:42:24 +01:00
Peter Xu
ec1cf69c37 KVM: X86: Add per-vm stat for max rmap list size
Add a new statistic max_mmu_rmap_size, which stores the maximum size of rmap
for the vm.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210625153214.43106-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 09:36:37 -04:00
Sean Christopherson
7fa2a34751 KVM: x86/mmu: Return old SPTE from mmu_spte_clear_track_bits()
Return the old SPTE when clearing a SPTE and push the "old SPTE present"
check to the caller.  Private shadow page support will use the old SPTE
in rmap_remove() to determine whether or not there is a linked private
shadow page.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <b16bac1fd1357aaf39e425aab2177d3f89ee8318.1625186503.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02 09:36:37 -04:00