Commit graph

1,059,104 commits

Author SHA1 Message Date
Andy Shevchenko
693064eafa media: atomisp: Remove unused port_enabled variable
Remove unused port_enabled variable in ia_css_isys_rx_configure().

Link: https://lore.kernel.org/linux-media/20210526124322.48915-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Andy Shevchenko
dbe93bc970 media: atomisp: Annotate a couple of definitions with __maybe_unused
There are definitions in the header that are not used by all modules inside
the driver. Annotate them with __maybe_unused to avoid compiler warnings.

Link: https://lore.kernel.org/linux-media/20210526124322.48915-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Andy Shevchenko
85001df54b media: atomisp: Remove unused declarations
There is a few static declarations that are not used anywhere, remove them.

Link: https://lore.kernel.org/linux-media/20210526124322.48915-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Shaokun Zhang
0ae19e8c08 media: atomisp: remove the repeated declaration
Function 'ia_css_mmu_invalidate_cache' is declared twice, remove the
repeated declaration.

Link: https://lore.kernel.org/linux-media/1621922559-1859-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Tom Rix
280355522d media: atomisp: improve error handling in gc2235_detect()
Static analysis reports this representative problem

atomisp-gc2235.c:867:20: warning: The right operand
  of '|' is a garbage value
        id = ((high << 8) | low);
                          ^ ~~~
When gc2235_read_reg() fails, its return val is never written.

For gc2235_detect(), high and low are or-ed and compared
with GC2235_ID, 0x2235.  Initialize both to 0 and skip
checking the read returns, it's errors are not passed up, only
-ENODEV is.

Link: https://lore.kernel.org/linux-media/20210521194805.2078135-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Aniket Bhattacharyea
6bdad3bb7e media: atomisp: Fix whitespace at the beginning of line
This patch fixes whitespace at the beginning of line by wrapping after
the type name and aligning the arguments with the open parenthesis.
Identified by checkpatch: WARNING: please, no spaces at the start of a
line.

Link: https://lore.kernel.org/linux-media/20210524173609.672153-1-aniketmail669@gmail.com
Signed-off-by: Aniket Bhattacharyea <aniketmail669@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Jiabing Wan
b09ea93862 media: atomisp: Align block comments
Fixing the following checkpatch warning:
WARNING: Block comments should align the * on each line

Link: https://lore.kernel.org/linux-media/20210518112938.88240-1-wanjiabing@vivo.com
Signed-off-by: Jiabing Wan <kael_w@yeah.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Nguyen Dinh Phi
e53656ab8c media: atomisp: Use sysfs_emit() instead of sprintf() where appropriate
sysfs_emit() is preferred over raw sprintf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in sanity checks.

Link: https://lore.kernel.org/linux-media/20210513034650.252993-1-phind.uet@gmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Martiros Shakhzadyan
66b22424ad media: atomisp: Fix line continuation style issue in sh_css.c
Fix logical continuation style issue and adjacent line splits.

Link: https://lore.kernel.org/linux-media/20210508235622.300394-5-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Martiros Shakhzadyan
d2f3009e86 media: atomisp: Use kcalloc instead of kzalloc with multiply in sh_css.c
Use kcalloc instead of kzalloc with multiplication.

Link: https://lore.kernel.org/linux-media/20210508235622.300394-4-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Martiros Shakhzadyan
a93cf5a505 media: atomisp: Remove unnecessary parens in sh_css.c
Remove unnecessary parenthesis.

Link: https://lore.kernel.org/linux-media/20210508235622.300394-3-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Martiros Shakhzadyan
9e77871a59 media: atomisp: Resolve goto style issue in sh_css.c
Change the goto label to lower case.
Remove a space in the goto label.

Link: https://lore.kernel.org/linux-media/20210508235622.300394-2-vrzh@vrzh.net
Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:04:02 +02:00
Yizhuo
0c980e3f52 media: atomisp: fix the uninitialized use and rename "retvalue"
Inside function mt9m114_detect(), variable "retvalue" could
be uninitialized if mt9m114_read_reg() returns error, however, it
is used in the later if statement, which is potentially unsafe.

The local variable "retvalue" is renamed to "model" to avoid
confusion.

Link: https://lore.kernel.org/linux-media/20210625053858.3862-1-yzhai003@ucr.edu
Fixes: ad85094b29 ("Revert "media: staging: atomisp: Remove driver"")
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-07-23 09:03:32 +02:00
Ard Biesheuvel
821720b9f3 crypto: x86/aes-ni - add missing error checks in XTS code
The updated XTS code fails to check the return code of skcipher_walk_virt,
which may lead to skcipher_walk_abort() or skcipher_walk_done() being called
while the walk argument is in an inconsistent state.

So check the return value after each such call, and bail on errors.

Fixes: 2481104fe9 ("crypto: x86/aes-ni-xts - rewrite and drop indirections via glue helper")
Reported-by: Dave Hansen <dave.hansen@intel.com>
Reported-by: syzbot <syzbot+5d1bad8042a8f0e8117a@syzkaller.appspotmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-07-23 14:49:18 +08:00
Christoph Niedermaier
ac04da5c7b ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants
The minimum available memory size of all DHCOM i.MX6 variants is 512 MB.
Set this value for the memory node. If U-Boot fails to fill the memory
size, at least all DHCOM i.MX6 variants should run without problems.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 14:47:29 +08:00
Christoph Niedermaier
0daad458e2 ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property
An EDID lookup is not needed with this panel.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 14:41:11 +08:00
Krzysztof Kozlowski
10dd9a8a5f Merge branch 'for-v5.15/tegra-mc' into for-next 2021-07-23 08:26:39 +02:00
Mauro Carvalho Chehab
e460a86aab MAINTAINERS: update arm,pl353-smc.yaml reference
The file name: Documentation/devicetree/bindings/mtd/arm,pl353-smc.yaml
should be, instead: Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml.

Update its cross-reference accordingly.

Fixes: 813d52799a ("MAINTAINERS: Add PL353 SMC entry")
Fixes: d3d0e1e857 ("dt-binding: memory: pl353-smc: Convert to yaml")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1a9b26e4f9f7a01bcd676d7e7a3a929085fc2adb.1626947923.git.mchehab+huawei@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-07-23 08:26:26 +02:00
Arnd Bergmann
eaf89f1cd3 memory: tegra: fix unused-function warning
The tegra186_mc_client_sid_override() is only called from
an #ifdef block:

drivers/memory/tegra/tegra186.c:74:13: error: 'tegra186_mc_client_sid_override' defined but not used [-Werror=unused-function]
   74 | static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Add another #ifdef around the called function.

Fixes: 393d66fd2c ("memory: tegra: Implement SID override programming")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210722090748.1157470-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-07-23 08:25:34 +02:00
Nicholas Piggin
d9c57d3ed5 KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
The H_ENTER_NESTED hypercall is handled by the L0, and it is a request
by the L1 to switch the context of the vCPU over to that of its L2
guest, and return with an interrupt indication. The L1 is responsible
for switching some registers to guest context, and the L0 switches
others (including all the hypervisor privileged state).

If the L2 MSR has TM active, then the L1 is responsible for
recheckpointing the L2 TM state. Then the L1 exits to L0 via the
H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit,
and then it recheckpoints the TM state as part of the nested entry and
finally HRFIDs into the L2 with TM active MSR. Not efficient, but about
the simplest approach for something that's horrendously complicated.

Problems arise if the L1 exits to the L0 with a TM state which does not
match the L2 TM state being requested. For example if the L1 is
transactional but the L2 MSR is non-transactional, or vice versa. The
L0's HRFID can take a TM Bad Thing interrupt and crash.

Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then
ensuring that if the L1 is suspended then the L2 must have TM active,
and if the L1 is not suspended then the L2 must not have TM active.

Fixes: 360cae3137 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-23 16:19:38 +10:00
Nicholas Piggin
f62f3c2064 KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.

Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].

Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.

Fixes: 8e591cb720 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-23 16:14:31 +10:00
Zheyu Ma
e39cdacf2f pcmcia: i82092: fix a null pointer dereference bug
During the driver loading process, the 'dev' field was not assigned, but
the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map'
function.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
CC: <stable@vger.kernel.org>
[linux@dominikbrodowski.net: shorten commit message, add Cc to stable]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2021-07-23 08:08:54 +02:00
Pierre-Louis Bossart
caa15c8dcb soundwire: dmi-quirks: add quirk for Intel 'Bishop County' NUC M15
The same quirk is used for LAPBC510 and LAPBC710 skews who use the
same audio design.

These devices have the same BIOS issues inherited from the Intel
reference, add the same _ADR remap previously used on HP devices.

BugLink: https://github.com/thesofproject/linux/issues/3049
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210719233248.557923-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-23 11:36:49 +05:30
Alexandre Ghiti
db6b84a368
riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
The check that is done in setup_bootmem currently only works for 32-bit
kernel since the kernel mapping has been moved outside of the linear
mapping for 64-bit kernel. So make sure that for 64-bit kernel, the kernel
mapping does not overlap with the last 4K of the addressable memory.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-22 21:34:36 -07:00
Hyunchul Lee
1d904eaf3f ksmbd: fix -Wstringop-truncation warnings
Kernel test bot reports the following warnings:

   In function 'ndr_write_string',
       inlined from 'ndr_encode_dos_attr' at fs/ksmbd/ndr.c:136:3:
>> fs/ksmbd/ndr.c:70:2: warning: 'strncpy' destination unchanged after
copying no bytes [-Wstringop-truncation]
      70 |  strncpy(PAYLOAD_HEAD(n), value, sz);
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In function 'ndr_write_string',
       inlined from 'ndr_encode_dos_attr' at fs/ksmbd/ndr.c:134:3:
>> fs/ksmbd/ndr.c:70:2: warning: 'strncpy' output truncated before
terminating nul copying as many bytes from a string as its length
[-Wstringop-truncation]
      70 |  strncpy(PAYLOAD_HEAD(n), value, sz);
         |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   fs/ksmbd/ndr.c: In function 'ndr_encode_dos_attr':
   fs/ksmbd/ndr.c:134:3: note: length computed here
     134 |   ndr_write_string(n, hex_attr, strlen(hex_attr));
         |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-23 13:10:57 +09:00
Marios Makassikis
654c8876f9 ksmbd: Fix potential memory leak in tcp_destroy_socket()
ksmbd_socket must be freed even if kernel_sock_shutdown() somehow fails.

Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-23 13:10:55 +09:00
Christoph Niedermaier
377b50926d ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board
On the PDK2 there are 4 keys and 4 leds. DHCOM GPIOs are
used for that, but one led isn't useable, because the GPIO
is already used as touch interrupt.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 12:07:33 +08:00
Christoph Niedermaier
fccf2b401e ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs
Set stdout-path to "serial0:15200n8" to align it with other DHCOM
SoMs like the DHCOM STM32MP1.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 12:05:43 +08:00
Christoph Niedermaier
cd35bf9dd9 ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl
The pin CSI0_DATA_EN is reserved for PCIe Wake. Move this pin to
the SoM devicetree. Add PCIe Reset GPIO to the board devicetree.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 12:02:42 +08:00
Christoph Niedermaier
e0dff0fe0b ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM
Fill in the custom GPIO line names used by DH on the DHCOM SoM.
The GPIO line names are in accordance to DHCOM Design Guide R04
available at [1], section 3.9 GPIO. Adding also GPIO line names
for the hardware and memory coding.

[1] https://wiki.dh-electronics.com/images/5/52/DOC_DHCOM-Design-Guide_R04_2018-06-28.pdf

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 12:01:05 +08:00
Christoph Niedermaier
dd720c7e18 ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY
Enable the interrupt mode for the ethernet PHY by adding the
necessary property and a separate pinctrl for the PHY. Also
add the compatible property for it.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:57:54 +08:00
Christoph Niedermaier
2af8a617b1 ARM: dts: imx6q-dhcom: Add the parallel system bus
Add the parallel system bus provided by the i.MX6 WEIM interface via an
address latch. The OE pin of the latch is controlled by a fixed regulator.
The pin is low active. This is ensured by omitting the regulators property
enable-active-high. The flags value of the gpio property (3rd value), which
is also use to define active high/low, is set to 0 because it is ignored
by gpiolib-of.c.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:56:05 +08:00
Alexandre Ghiti
c99127c452
riscv: Make sure the linear mapping does not use the kernel mapping
For 64-bit kernel, the end of the address space is occupied by the
kernel mapping and currently, the functions to populate the kernel page
tables (i.e. create_p*d_mapping) do not override existing mapping so we
must make sure the linear mapping does not map memory in the kernel mapping
by clipping the memory above the memory limit.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: c9811e379b ("riscv: Add mem kernel parameter support")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-22 20:48:04 -07:00
Linus Torvalds
8baef6386b drm fixes for 5.14-rc3
core:
 - fix for non-drm ioctls on drm fd
 
 panel:
 - avoid double free
 
 ttm:
 - refcounting fix
 - NULL checks
 
 amdgpu:
 - Yellow Carp updates
 - Add some Yellow Carp DIDs
 - Beige Goby updates
 - CIK 10bit 4K regression fix
 - GFX10 golden settings updates
 - eDP panel regression fix
 - Misc display fixes
 - Aldebaran fix
 - fix COW checks
 
 nouveau:
 - init BO GEM fields
 
 i915:
 - revert async command parsing
 - revert fence error propogation
 - GVT fix for shadow ppgtt
 
 vc4:
 - fix interrupt handling
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmD6LgYACgkQDHTzWXnE
 hr5nXQ//QXh3suDcmnYSQmT45RqGTTw43mkpPEOG9GHKt3toxugMEY434Tfx7PYt
 f6yeHhGczb1HqyJU4La+v6uHY51lIiN77y35KgONkO1EHNmnfVheG33jFTx4hlUQ
 IAKdVquwDzn+pc+RknVx/mz2b0Pu03u9tWv85c3MuhPxXLLQhUq85j3gSi9h4lVq
 VJobOREvIqZhaikjeQjflSunJ7khOw1Efjn9uCz+nIDtuJ4a7QOaCBw8J2P0cEBN
 CEziVzHs2sd70olzDjbHpUIOymAsAao7HhyBG+0RqhEgEQMHZO/6vPRQ8DLKmdxm
 6Kl8tOu8HTIVRYYgldTiCpI2nOmUxVvC13ANcsJjx0+bU6MBP3Yoj1rsNF+sOss2
 eREDImesO+JFxVYBEoipepRLukoENZglx9tUr96yqH47iiW/6tTTTm7qO956AdMx
 v+Wnu//fFuLuRV3z4qnio2hkCPJ8UlEHnSc1EjNB8nBRUttYWxwBBpwMk9jyZsD3
 IXMOxWq962zp8C22FQ7/YLQs4d6BdDsjigXdkzjpD55TMNl8xg2MqiMBaRkZ5XaF
 8meAQTuFCWtT0V+ZbRKCpwsax86kDflwhmT0ifoC6S9b2OQh2hWDstl/5dKQGPw2
 dQfKc5zL9FoX7P1VSNiDK3A5qJwGydaL695UoONGPUVFM/0ESkM=
 =jqCV
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Regular fixes - a bunch of amdgpu fixes are the main thing mostly for
  the new gpus. There is also some i915 reverts for older changes that
  were having some unwanted side effects. One nouveau fix for a report
  regressions, and otherwise just some misc fixes.

  core:
   - fix for non-drm ioctls on drm fd

  panel:
   - avoid double free

  ttm:
   - refcounting fix
   - NULL checks

  amdgpu:
   - Yellow Carp updates
   - Add some Yellow Carp DIDs
   - Beige Goby updates
   - CIK 10bit 4K regression fix
   - GFX10 golden settings updates
   - eDP panel regression fix
   - Misc display fixes
   - Aldebaran fix
   - fix COW checks

  nouveau:
   - init BO GEM fields

  i915:
   - revert async command parsing
   - revert fence error propogation
   - GVT fix for shadow ppgtt

  vc4:
   - fix interrupt handling"

* tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  drm/panel: raspberrypi-touchscreen: Prevent double-free
  drm/amdgpu - Corrected the video codecs array name for yellow carp
  drm/amd/display: Fix ASSR regression on embedded panels
  drm/amdgpu: add yellow carp pci id (v2)
  drm/amdgpu: update yellow carp external rev_id handling
  drm/amd/pm: Support board calibration on aldebaran
  drm/amd/display: change zstate allow msg condition
  drm/amd/display: Populate dtbclk entries for dcn3.02/3.03
  drm/amd/display: Line Buffer changes
  drm/amd/display: Remove MALL function from DCN3.1
  drm/amd/display: Only set default brightness for OLED
  drm/amd/display: Update bounding box for DCN3.1
  drm/amd/display: Query VCO frequency from register for DCN3.1
  drm/amd/display: Populate socclk entries for dcn3.02/3.03
  drm/amd/display: Fix max vstartup calculation for modes with borders
  drm/amd/display: implement workaround for riommu related hang
  drm/amd/display: Fix comparison error in dcn21 DML
  drm/i915: Correct the docs for intel_engine_cmd_parser
  drm/ttm: add missing NULL checks
  drm/ttm: Force re-init if ttm_global_init() fails
  ...
2021-07-22 20:32:13 -07:00
Alexandre Ghiti
c09dc9e1cd
riscv: Fix memory_limit for 64-bit kernel
As described in Documentation/riscv/vm-layout.rst, the end of the
virtual address space for 64-bit kernel is occupied by the modules/BPF/
kernel mappings so this actually reduces the amount of memory we are able
to map and then use in the linear mapping. So make sure this limit is
correctly set.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-22 20:29:30 -07:00
Christoph Niedermaier
ffd1e07259 dt-bindings: arm: fsl: Add DHCOM PicoITX and DHCOM DRC02 boards
Add DH electronics DHCOM PicoITX and DHCOM DRC02 boards. The DHCOM DRC02
device can only house a SOM with iMX6S and not with iMX6DL, due to some
thermal design consideration. But for compatible fsl,imx6dl is chosen,
because fsl,imx6s isn't available, the iMX6S is basically a iMX6DL with
one CPU core disabled and therefore the kernel discerns the iMX6S/iMX6DL
automatically.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: robh+dt@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: kernel@dh-electronics.com
Cc: Fabio Estevam <festevam@denx.de>
To: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:29:14 +08:00
Robin Gong
4e2b10be1f dmaengine: imx-sdma: add terminated list for freed descriptor in worker
Add terminated list for keeping descriptor so that it could be freed in
worker without any potential involving next descriptor raised up before
this descriptor freed, because vchan_get_all_descriptors get all
descriptors including the last terminated descriptor and the next
descriptor, hence, the next descriptor maybe freed unexpectly when it's
done in worker without this patch.
https://www.spinics.net/lists/dmaengine/msg23367.html

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:20:06 +08:00
Robin Gong
b98ce2f4e3 dmaengine: imx-sdma: add uart rom script
For the compatibility of NXP internal legacy kernel before 4.19 which
is based on uart ram script and upstreaming kernel based on uart rom
script, add both uart ram/rom script in latest sdma firmware. By default
uart rom script used.
Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).

rom script:
        uart_2_mcu_addr
	uartsh_2_mcu_addr /* through spba bus */
am script:
	uart_2_mcu_ram_addr
	uartsh_2_mcu_ram_addr /* through spba bus */

Please get latest sdma firmware from the below and put them into the path
(/lib/firmware/imx/sdma/):
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
/tree/imx/sdma

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:20:03 +08:00
Robin Gong
04d21cc278 dma: imx-sdma: add i.mx6ul compatible name
Add i.mx6ul compatible name in binding doc.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:19:48 +08:00
Robin Gong
4852e9a299 dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:19:25 +08:00
Robin Gong
8eb1252bbe spi: imx: remove ERR009165 workaround on i.mx6ul
ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and
i.mx8m/8mm still need this errata. Please refer to nxp official
errata document from https://www.nxp.com/ .

For removing workaround on those chips. Add new i.mx6ul type.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:19:22 +08:00
Robin Gong
980f884866 spi: imx: fix ERR009165
Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:19:19 +08:00
Robin Gong
a4965888e6 dmaengine: imx-sdma: add mcu_2_ecspi script
Add mcu_2_ecspi script to fix ecspi errata ERR009165.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:19:03 +08:00
Robin Gong
e8fafa5064 dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
Add 'fw_loaded' and 'is_ram_script' to check if the script used by channel
is ram script and it's loaded or not, so that could prevent meaningless
following malloc dma descriptor and bd allocate in sdma_transfer_init(),
otherwise memory may be consumed out potentially without free in case
that spi fallback into pio while dma transfer failed by sdma firmware not
ready(next ERR009165 patch depends on sdma RAM scripts/firmware).

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:18:38 +08:00
Robin Gong
e555a03b11 dmaengine: imx-sdma: remove duplicated sdma_load_context
Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().

Fixes: ad0d92d7ba ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:18:34 +08:00
Robin Gong
8592f02464 Revert "dmaengine: imx-sdma: refine to load context only once"
This reverts commit ad0d92d7ba, because
in spi-imx case, burst length may be changed dynamically.

Fixes: ad0d92d7ba ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:18:30 +08:00
Robin Gong
394e1fb847 Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
           be sent twice
So revert commit 'dd4b487b32' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:18:26 +08:00
Robin Gong
affd9bfabc Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS
->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer
to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ
Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and
shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA
scripts should keep the same behaviour, the issue only caught in AIPS
script sounds not solide.
  The issue is more likely as the ecspi errata
ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf):
eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to
       be sent twice
So revert commit 'df07101e1c' firstly.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23 11:17:55 +08:00
Jiri Olsa
da97553ec6 libbpf: Export bpf_program__attach_kprobe_opts function
Export bpf_program__attach_kprobe_opts as a public API.

Rename bpf_program_attach_kprobe_opts to bpf_kprobe_opts and turn it into OPTS
struct.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20210721215810.889975-4-jolsa@kernel.org
2021-07-22 20:09:16 -07:00
Jiri Olsa
e3f9bc35ea libbpf: Allow decimal offset for kprobes
Allow to specify decimal offset in SEC macro, like:
  SEC("kprobe/bpf_fentry_test7+5")

Add selftest for that.

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20210721215810.889975-3-jolsa@kernel.org
2021-07-22 20:09:16 -07:00