Commit graph

1,059,104 commits

Author SHA1 Message Date
Takashi Iwai
fc93c96fe3 ALSA: compress: Drop unused functions
snd_compress_register() and snd_compress_deregister() API functions
have been never used by in-tree drivers.
Let's clean up the dead code.

Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210714162424.4412-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-15 10:22:30 +02:00
Suravee Suthikulpanit
4a5c155a5a MAINTAINERS: Add Suravee Suthikulpanit as Reviewer for AMD IOMMU (AMD-Vi)
To help review changes related to AMD IOMMU.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1626296542-30454-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-07-15 09:00:16 +02:00
Steve French
9946aa630a
Merge pull request #61 from namjaejeon/cifsd-for-next
ksmbd-fixes
2021-07-14 20:55:12 -05:00
He Fengqing
75f0fc7b48 bpf: Fix potential memleak and UAF in the verifier.
In bpf_patch_insn_data(), we first use the bpf_patch_insn_single() to
insert new instructions, then use adjust_insn_aux_data() to adjust
insn_aux_data. If the old env->prog have no enough room for new inserted
instructions, we use bpf_prog_realloc to construct new_prog and free the
old env->prog.

There have two errors here. First, if adjust_insn_aux_data() return
ENOMEM, we should free the new_prog. Second, if adjust_insn_aux_data()
return ENOMEM, bpf_patch_insn_data() will return NULL, and env->prog has
been freed in bpf_prog_realloc, but we will use it in bpf_check().

So in this patch, we make the adjust_insn_aux_data() never fails. In
bpf_patch_insn_data(), we first pre-malloc memory for the new
insn_aux_data, then call bpf_patch_insn_single() to insert new
instructions, at last call adjust_insn_aux_data() to adjust
insn_aux_data.

Fixes: 8041902dae ("bpf: adjust insn_aux_data when patching insns")
Signed-off-by: He Fengqing <hefengqing@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210714101815.164322-1-hefengqing@huawei.com
2021-07-14 18:31:24 -07:00
Namjae Jeon
a9c241d01d ksmbd: fix typo in comment
Fix typo "openning" -> "opening".

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-15 10:25:30 +09:00
Kuniyuki Iwashima
f170acda7f bpf: Fix a typo of reuseport map in bpf.h.
Fix s/BPF_MAP_TYPE_REUSEPORT_ARRAY/BPF_MAP_TYPE_REUSEPORT_SOCKARRAY/ typo
in bpf.h.

Fixes: 2dbb9b9e6d ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210714124317.67526-1-kuniyu@amazon.co.jp
2021-07-14 18:12:05 -07:00
Matt Roper
7ad2d09ccd Merge branch 'topic/revid_steppings' into drm-intel-next
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards).  To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2021-07-14 17:57:51 -07:00
Matt Roper
d6e6ac294d Merge branch 'topic/revid_steppings' into drm-intel-gt-next
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards).  To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2021-07-14 17:55:21 -07:00
Matt Roper
eee42141e4 drm/i915/icl: Drop workarounds that only apply to pre-production steppings
We're past the point at which we usually drop workarounds that were
never needed on production hardware.  The driver will already print an
error and apply taint if loaded on pre-production hardware.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com
2021-07-14 17:49:02 -07:00
Matt Roper
41eb74d51d drm/i915/cnl: Drop all workarounds
All of the Cannon Lake hardware that came out had graphics fused off,
and our userspace drivers have already dropped their support for the
platform; CNL-specific code in i915 that isn't inherited by subsequent
platforms is effectively dead code.  Let's remove all of the
CNL-specific workarounds as a quick and easy first step.

References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6899
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-12-matthew.d.roper@intel.com
2021-07-14 17:48:03 -07:00
Matt Roper
dae751f40c drm/i915/dg1: Use revid->stepping tables
Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.

This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.

v2:
 - Use COMMON_STEP() macro in table.  (Anusha)

Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com
2021-07-14 17:47:11 -07:00
Matt Roper
97cf9b5815 drm/i915/rkl: Use revid->stepping tables
Switch RKL to use a revid->stepping table as we're trying to do on all
platforms going forward.

Bspec: 44501
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-10-matthew.d.roper@intel.com
2021-07-14 17:47:11 -07:00
Matt Roper
61b2dc4b58 drm/i915/jsl_ehl: Use revid->stepping tables
Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.

v2:
 - Use COMMON_STEP().  (Anusha)

Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com
2021-07-14 17:47:01 -07:00
Matt Roper
cc7a3393f2 drm/i915/icl: Use revid->stepping tables
Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward.  While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).

Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping.  The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information.  We've
requested that the missing information be restored.

I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware.  An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.

v2:
 - Drop pre-production steppings and add error/taint at startup when
   loading on pre-production hardware.

Bspec: 21141  # pre-Nov 2019 snapshot
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com
2021-07-14 17:36:22 -07:00
Matt Roper
3dd22d46c7 drm/i915/glk: Use revid->stepping tables
Switch GLK to use a revid->stepping table as we're trying to do on all
platforms going forward.  Pre-production and placeholder revisions are
omitted.

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 19131
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com
2021-07-14 17:36:22 -07:00
Alexei Starovoitov
cf2c6f0863 bpf: Sync tools/include/uapi/linux/bpf.h
Commit 47316f4a30 missed updating tools/.../bpf.h.
Sync it.

Fixes: 47316f4a30 ("bpf: Support input xdp_md context in BPF_PROG_TEST_RUN")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-07-14 17:36:20 -07:00
Matt Roper
fd51fa8ac6 drm/i915/bxt: Use revid->stepping tables
Switch BXT to use a revid->stepping table as we're trying to do on all
platforms going forward.  Note that the REVID macros we had before
weren't being used anywhere in the code and weren't even correct; the
table values come from the bspec (and omits all the placeholder and
preproduction revisions).

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 13620
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com
2021-07-14 17:36:13 -07:00
Matt Roper
6eea6f16e6 drm/i915/kbl: Drop pre-production revision from stepping table
We're long past the point where we need to care about pre-production
hardware, and we already warn the user and taint the kernel if we detect
the driver is being loaded on pre-production hardware.

Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-5-matthew.d.roper@intel.com
2021-07-14 17:36:12 -07:00
Matt Roper
0f93f5da1c drm/i915/skl: Use revid->stepping tables
Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward.  Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.

Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1).  Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.

v2:
 - Since GT and display steppings are always identical on SKL use a
   macro to set both values at once in a more readable manner.  (Anusha)
 - Drop preproduction steppings.

Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com
2021-07-14 17:35:59 -07:00
Matt Roper
c314b69395 drm/i915: Make pre-production detection use direct revid comparison
Although we're converting our workarounds to use a revid->stepping
lookup table, the function that detects pre-production hardware should
continue to compare against PCI revision ID values directly.  These are
listed in the bspec as integers, so it's easier to confirm their
correctness if we just use an integer literal rather than a symbolic
name anyway.

Bspec: 13620, 19131, 13626, 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-3-matthew.d.roper@intel.com
2021-07-14 17:35:59 -07:00
Anusha Srivatsa
db47fe727e drm/i915/step: s/<platform>_revid_tbl/<platform>_revids
Simplify the stepping info array name.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-2-matthew.d.roper@intel.com
2021-07-14 17:35:43 -07:00
Nicolas Saenz Julienne
aebacb7f6c timers: Fix get_next_timer_interrupt() with no timers pending
31cd0e119d ("timers: Recalculate next timer interrupt only when
necessary") subtly altered get_next_timer_interrupt()'s behaviour. The
function no longer consistently returns KTIME_MAX with no timers
pending.

In order to decide if there are any timers pending we check whether the
next expiry will happen NEXT_TIMER_MAX_DELTA jiffies from now.
Unfortunately, the next expiry time and the timer base clock are no
longer updated in unison. The former changes upon certain timer
operations (enqueue, expire, detach), whereas the latter keeps track of
jiffies as they move forward. Ultimately breaking the logic above.

A simplified example:

- Upon entering get_next_timer_interrupt() with:

	jiffies = 1
	base->clk = 0;
	base->next_expiry = NEXT_TIMER_MAX_DELTA;

  'base->next_expiry == base->clk + NEXT_TIMER_MAX_DELTA', the function
  returns KTIME_MAX.

- 'base->clk' is updated to the jiffies value.

- The next time we enter get_next_timer_interrupt(), taking into account
  no timer operations happened:

	base->clk = 1;
	base->next_expiry = NEXT_TIMER_MAX_DELTA;

  'base->next_expiry != base->clk + NEXT_TIMER_MAX_DELTA', the function
  returns a valid expire time, which is incorrect.

This ultimately might unnecessarily rearm sched's timer on nohz_full
setups, and add latency to the system[1].

So, introduce 'base->timers_pending'[2], update it every time
'base->next_expiry' changes, and use it in get_next_timer_interrupt().

[1] See tick_nohz_stop_tick().
[2] A quick pahole check on x86_64 and arm64 shows it doesn't make
    'struct timer_base' any bigger.

Fixes: 31cd0e119d ("timers: Recalculate next timer interrupt only when necessary")
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2021-07-15 01:23:54 +02:00
Frederic Weisbecker
1a3402d93c posix-cpu-timers: Fix rearm racing against process tick
Since the process wide cputime counter is started locklessly from
posix_cpu_timer_rearm(), it can be concurrently stopped by operations
on other timers from the same thread group, such as in the following
unlucky scenario:

         CPU 0                                CPU 1
         -----                                -----
                                           timer_settime(TIMER B)
   posix_cpu_timer_rearm(TIMER A)
       cpu_clock_sample_group()
           (pct->timers_active already true)

                                           handle_posix_cpu_timers()
                                               check_process_timers()
                                                   stop_process_timers()
                                                       pct->timers_active = false
       arm_timer(TIMER A)

   tick -> run_posix_cpu_timers()
       // sees !pct->timers_active, ignore
       // our TIMER A

Fix this with simply locking process wide cputime counting start and
timer arm in the same block.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Fixes: 60f2ceaa81 ("posix-cpu-timers: Remove unnecessary locking around cpu_clock_sample_group")
Cc: stable@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
2021-07-15 01:20:10 +02:00
David S. Miller
3ffd3dad4b Merge branch 'r8152-pm-fixxes'
Takashi Iwai says:

====================
r8152: Fix a couple of PM problems

it seems that r8152 driver suffers from the deadlock at both runtime
and system PM.  Formerly, it was seen more often at hibernation
resume, but now it's triggered more frequently, as reported in SUSE
Bugzilla:
  https://bugzilla.suse.com/show_bug.cgi?id=1186194

While debugging the problem, I stumbled on a few obvious bugs and here
is the results with two patches for addressing the resume problem.

***

However, the story doesn't end here, unfortunately, and those patches
don't seem sufficing.  The rest major problem is that the driver calls
napi_disable() and napi_enable() in the PM suspend callbacks.  This
makes the system stalling at (runtime-)suspend.  If we drop
napi_disable() and napi_enable() calls in the PM suspend callbacks, it
starts working (that was the result in Bugzilla comment 13):
  https://bugzilla.suse.com/show_bug.cgi?id=1186194#c13

So, my patches aren't enough and we still need to investigate
further.  It'd be appreciated if anyone can give a fix or a hint for
more debugging.  The usage of napi_disable() at PM callbacks is unique
in this driver and looks rather suspicious to me; but I'm no expert in
this area so I might be wrong...
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-14 14:57:55 -07:00
Takashi Iwai
776ac63a98 r8152: Fix a deadlock by doubly PM resume
r8152 driver sets up the MAC address at reset-resume, while
rtl8152_set_mac_address() has the temporary autopm get/put.  This may
lead to a deadlock as the PM lock has been already taken for the
execution of the runtime PM callback.

This patch adds the workaround to avoid the superfluous autpm when
called from rtl8152_reset_resume().

Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-14 14:57:55 -07:00
Takashi Iwai
9c23aa5147 r8152: Fix potential PM refcount imbalance
rtl8152_close() takes the refcount via usb_autopm_get_interface() but
it doesn't release when RTL8152_UNPLUG test hits.  This may lead to
the imbalance of PM refcount.  This patch addresses it.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-14 14:57:55 -07:00
Christophe Branchereau
868d043f05
drm/panel: Add Innolux EJ030NA 3.0" 320x480 panel
Add support for the Innolux/Chimei EJ030NA 3.0"
320x480 TFT panel.

This panel can be found in the LDKs, RS97 V2.1 and RG300 (non IPS)
handheld gaming consoles.

While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels in delta arrangement.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-2-paul@crapouillou.net
2021-07-14 21:49:07 +01:00
Paul Cercueil
1333adfcc3
dt-bindings: display/panel: Add Innolux EJ030NA
Add binding for the Innolux EJ030NA panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-1-paul@crapouillou.net
2021-07-14 21:43:48 +01:00
Alex Hung
23e9592b06 platform/x86: wireless-hotkey: remove hardcoded "hp" from the error message
This driver is no longer specific to HP laptops so "hp" in the error
message is no longer applicable.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Link: https://lore.kernel.org/r/20210710190810.313104-1-alex.hung@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-14 22:32:26 +02:00
Austin Kim
893c47d196 selinux: return early for possible NULL audit buffers
audit_log_start() may return NULL in below cases:

  - when audit is not initialized.
  - when audit backlog limit exceeds.

After the call to audit_log_start() is made and then possible NULL audit
buffer argument is passed to audit_log_*() functions,
audit_log_*() functions return immediately in case of a NULL audit buffer
argument.

But it is optimal to return early when audit_log_start() returns NULL,
because it is not necessary for audit_log_*() functions to be called with
NULL audit buffer argument.

So add exception handling for possible NULL audit buffers where
return value can be handled from callers.

Signed-off-by: Austin Kim <austin.kim@lge.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-07-14 15:25:27 -04:00
Jinzhou Su
775da83005 drm/amdgpu: add another Renoir DID
Add new PCI device id.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.11.x
2021-07-14 15:08:55 -04:00
Jinzhou Su
0c492e22ba drm/amdgpu: add another Renoir DID
Add new PCI device id.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-14 14:55:36 -04:00
James Clark
83d1fc92d4 perf cs-etm: Split Coresight decode by aux records
Populate the auxtrace queues using AUX records rather than whole
auxtrace buffers so that the decoder is reset between each aux record.

This is similar to the auxtrace_queues__process_index() ->
auxtrace_queues__add_indexed_event() flow where
perf_session__peek_event() is used to read AUXTRACE events out of random
positions in the file based on the auxtrace index.

But now we loop over all PERF_RECORD_AUX events instead of AUXTRACE
buffers. For each PERF_RECORD_AUX event, we find the corresponding
AUXTRACE buffer using the index, and add a fragment of that buffer to
the auxtrace queues.

No other changes to decoding were made, apart from populating the
auxtrace queues. The result of decoding is identical to before, except
in cases where decoding failed completely, due to not resetting the
decoder.

The reason for this change is because AUX records are emitted any time
tracing is disabled, for example when the process is scheduled out.
Because ETM was disabled and enabled again, the decoder also needs to be
reset to force the search for a sync packet. Otherwise there would be
fatal decoding errors.

Testing
=======

Testing was done with the following script, to diff the decoding results
between the patched and un-patched versions of perf:

	#!/bin/bash
	set -ex

	$1 script -i $3 $4 > split.script
	$2 script -i $3 $4 > default.script

	diff split.script default.script | head -n 20

And it was run like this, with various itrace options depending on the
quantity of synthesised events:

	compare.sh ./perf-patched ./perf-default perf-per-cpu-2-threads.data --itrace=i100000ns

No changes in output were observed in the following scenarios:

* Simple per-cpu
	perf record -e cs_etm/@tmc_etr0/u top

* Per-thread, single thread
	perf record -e cs_etm/@tmc_etr0/u --per-thread ./threads_C

* Per-thread multiple threads (but only one thread collected data):
	perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597

* Per-thread multiple threads (both threads collected data):
	perf record -e cs_etm/@tmc_etr0/u --per-thread --pid 4596,4597

* Per-cpu explicit threads:
	perf record -e cs_etm/@tmc_etr0/u --pid 853,854

* System-wide (per-cpu):
    perf record -e cs_etm/@tmc_etr0/u -a

* No data collected (no aux buffers)
	Can happen with any command when run for a short period

* Containing truncated records
	Can happen with any command

* Containing aux records with 0 size
	Can happen with any command

* Snapshot mode (various files with and without buffer wrap)
	perf record -e cs_etm/@tmc_etr0/u -a --snapshot

Some differences were observed in the following scenario:

* Snapshot mode (with duplicate buffers)
	perf record -e cs_etm/@tmc_etr0/u -a --snapshot

Fewer samples are generated in snapshot mode if duplicate buffers
were gathered because buffers with the same offset are now only added
once. This gives different, but more correct results and no duplicate
data is decoded any more.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210624164303.28632-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14 14:42:36 -03:00
Arnaldo Carvalho de Melo
fa2c02e579 tools headers: Remove broken definition of __LITTLE_ENDIAN
The linux/kconfig.h file was copied from the kernel but the line where
with the generated/autoconf.h include from where the CONFIG_ entries
would come from was deleted, as tools/ build system don't create that
file, so we ended up always defining just __LITTLE_ENDIAN as
CONFIG_CPU_BIG_ENDIAN was nowhere to be found.

This in turn ended up breaking the build in some systems where
__LITTLE_ENDIAN was already defined, such as the androind NDK.

So just ditch that block that depends on the CONFIG_CPU_BIG_ENDIAN
define.

The kconfig.h file was copied just to get IS_ENABLED() and a
'make -C tools/all' doesn't breaks with this removal.

Fixes: 93281c4a96 ("x86/insn: Add an insn_decode() API")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YO8hK7lqJcIWuBzx@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-14 14:39:36 -03:00
Mark Brown
eb14ecca76
Merge series "soundwire/ASoC: add mockup codec support" from Bard Liao <yung-chuan.liao@linux.intel.com>:
Adding mockup SoundWire codec is useful to debug driver/topology changes
without having any actual device connected.

Bard Liao (2):
  soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA
  soundwire: stream: don't program mockup device ports

Pierre-Louis Bossart (8):
  ASoC: codecs: add SoundWire mockup device support
  ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
  ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
  ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
  soundwire: add flag to ignore all command/control for mockup devices
  soundwire: bus: squelch error returned by mockup devices
  soundwire: cadence: add debugfs interface for PDI loopbacks
  soundwire: cadence: override PDI configurations to create loopback

 drivers/soundwire/bus.c                       |  10 +-
 drivers/soundwire/cadence_master.c            | 174 ++++++++--
 drivers/soundwire/cadence_master.h            |   3 +
 drivers/soundwire/stream.c                    |   5 +-
 include/linux/soundwire/sdw.h                 |   3 +
 sound/soc/codecs/Kconfig                      |  18 +
 sound/soc/codecs/Makefile                     |   2 +
 sound/soc/codecs/sdw-mockup.c                 | 312 ++++++++++++++++++
 sound/soc/intel/boards/Kconfig                |   1 +
 sound/soc/intel/boards/sof_sdw.c              |  41 +++
 sound/soc/intel/common/Makefile               |   3 +-
 .../intel/common/soc-acpi-intel-cnl-match.c   |  15 +
 .../common/soc-acpi-intel-sdw-mockup-match.c  | 166 ++++++++++
 .../common/soc-acpi-intel-sdw-mockup-match.h  |  17 +
 .../intel/common/soc-acpi-intel-tgl-match.c   |  23 ++
 15 files changed, 754 insertions(+), 39 deletions(-)
 create mode 100644 sound/soc/codecs/sdw-mockup.c
 create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.c
 create mode 100644 sound/soc/intel/common/soc-acpi-intel-sdw-mockup-match.h

base-commit: e73f0f0ee7

--
2.17.1
2021-07-14 18:29:58 +01:00
Pierre-Louis Bossart
0ccac3bcf3
ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
Add support for SoundWire mockup devices. The configurations assume the
same topology as the CML SoundWire devices and can be used to test the
SOF firmware on a development board (RVP, UpExtreme) without any
hardware connected.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:07 +01:00
Pierre-Louis Bossart
3025d398c4
ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
Follow the same idea as for CNL/UpExtreme and add mockup test
first. They will only be selected if the SSDT is modified to add such
mockup devices.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:07 +01:00
Pierre-Louis Bossart
2694cda7a4
ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
Add support for two configurations with SoundWire mockup devices that
emulate the two CometLake configurations with one and two amps. This
patch helps test the SOF firmware on an UpExtreme board without any
hardware connected, e.g. by doing a loopback of the playback stream on
capture streams.

The mapping of the partIDs is as follows:

0xAAAA: generic full-duplex codec (not currently used)
0xAA55: headset codec (mock-up of RT711/RT5682) - full-duplex
0x55AA: amplifier (mock-up of RT1308/RT1316/Maxim 98373) - playback
with IV sense feedback
0x5555: mic codec (mock-up of RT715) - capture-only

The tables are added in a separate file to allow for mockup codecs to be
added on other platforms, but the mapping to specific topologies
remains platform-specific.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:06 +01:00
Pierre-Louis Bossart
81d3d3d0bf
ASoC: codecs: add SoundWire mockup device support
To test the host controller and bus management code, it is currently
required to have a physical SoundWire peripheral attached to the
bus. To help with pre-silicon or early hardware enablement, it would
be very useful to have a SoundWire 'mockup' device that is exposed in
platform firmware but does not drive any signal on the bus.

This is different to the existing ASoC 'dummy' codec uses for I2S/TDM,
the SoundWire spec makes it clear that a device that is not attached
to the bus is not permitted to interact with the bus, be it for
command/control or data.

This patch exposes a 'mockup' device, with a minimalist driver, with 4
partID values reserved by Intel for such test configurations. The
mockup device exposes one full-duplex DAI based on 2 ports (DP1 for
playback and DP8 for capture). The capture data port is just virtual,
such a mockup device is prevented by the SoundWire specification from
presenting any data generated by a Source port without being Attached.

All the callbacks exposed by the SoundWire Slave interface are
populated, even if they just return immediately. This is intentional
to describe what a minimal codec driver should do and implement and
help new codec vendors provide support for their devices.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210714032209.11284-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-14 18:02:05 +01:00
Stephen Boyd
10252bae86 mmc: core: Don't allocate IDA for OF aliases
There's a chance that the IDA allocated in mmc_alloc_host() is not freed
for some time because it's freed as part of a class' release function
(see mmc_host_classdev_release() where the IDA is freed). If another
thread is holding a reference to the class, then only once all balancing
device_put() calls (in turn calling kobject_put()) have been made will
the IDA be released and usable again.

Normally this isn't a problem because the kobject is released before
anything else that may want to use the same number tries to again, but
with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty
easy to try to allocate an alias from the IDA twice while the first time
it was allocated is still pending a call to ida_simple_remove(). It's
also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and
probe defering a driver at boot that calls mmc_alloc_host() before
trying to get resources that may defer likes clks or regulators.

Instead of allocating from the IDA in this scenario, let's just skip it
if we know this is an OF alias. The number is already "claimed" and
devices that aren't using OF aliases won't try to use the claimed
numbers anyway (see mmc_first_nonreserved_index()). This should avoid
any issues with mmc_alloc_host() returning failures from the
ida_simple_get() in the case that we're using an OF alias.

Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Sujit Kautkar <sujitka@chromium.org>
Reported-by: Zubin Mithra <zsm@chromium.org>
Fixes: fa2d0aa969 ("mmc: core: Allow setting slot index via device tree alias")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-07-14 18:55:28 +02:00
Stephen Boyd
edb25572fc mmc: core: Use kref in place of struct mmc_blk_data::usage
Ulf reported the following KASAN splat after adding some manual hacks
into mmc-utils[1].

 DEBUG: mmc_blk_open: Let's sleep for 10s..
 mmc1: card 0007 removed
 BUG: KASAN: use-after-free in mmc_blk_get+0x58/0xb8
 Read of size 4 at addr ffff00000a394a28 by task mmc/180

 CPU: 2 PID: 180 Comm: mmc Not tainted 5.10.0-rc4-00069-gcc758c8c7127-dirty #5
 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
 Call trace:
  dump_backtrace+0x0/0x2b4
  show_stack+0x18/0x6c
  dump_stack+0xfc/0x168
  print_address_description.constprop.0+0x6c/0x488
  kasan_report+0x118/0x210
  __asan_load4+0x94/0xd0
  mmc_blk_get+0x58/0xb8
  mmc_blk_open+0x7c/0xdc
  __blkdev_get+0x3b4/0x964
  blkdev_get+0x64/0x100
  blkdev_open+0xe8/0x104
  do_dentry_open+0x234/0x61c
  vfs_open+0x54/0x64
  path_openat+0xe04/0x1584
  do_filp_open+0xe8/0x1e4
  do_sys_openat2+0x120/0x230
  __arm64_sys_openat+0xf0/0x15c
  el0_svc_common.constprop.0+0xac/0x234
  do_el0_svc+0x84/0xa0
  el0_sync_handler+0x264/0x270
  el0_sync+0x174/0x180

 Allocated by task 33:
  stack_trace_save+0x9c/0xdc
  kasan_save_stack+0x28/0x60
  __kasan_kmalloc.constprop.0+0xc8/0xf0
  kasan_kmalloc+0x10/0x20
  mmc_blk_alloc_req+0x94/0x4b0
  mmc_blk_probe+0x2d4/0xaa4
  mmc_bus_probe+0x34/0x4c
  really_probe+0x148/0x6e0
  driver_probe_device+0x78/0xec
  __device_attach_driver+0x108/0x16c
  bus_for_each_drv+0xf4/0x15c
  __device_attach+0x168/0x240
  device_initial_probe+0x14/0x20
  bus_probe_device+0xec/0x100
  device_add+0x55c/0xaf0
  mmc_add_card+0x288/0x380
  mmc_attach_sd+0x18c/0x22c
  mmc_rescan+0x444/0x4f0
  process_one_work+0x3b8/0x650
  worker_thread+0xa0/0x724
  kthread+0x218/0x220
  ret_from_fork+0x10/0x38

 Freed by task 33:
  stack_trace_save+0x9c/0xdc
  kasan_save_stack+0x28/0x60
  kasan_set_track+0x28/0x40
  kasan_set_free_info+0x24/0x4c
  __kasan_slab_free+0x100/0x180
  kasan_slab_free+0x14/0x20
  kfree+0xb8/0x46c
  mmc_blk_put+0xe4/0x11c
  mmc_blk_remove_req.part.0+0x6c/0xe4
  mmc_blk_remove+0x368/0x370
  mmc_bus_remove+0x34/0x50
  __device_release_driver+0x228/0x31c
  device_release_driver+0x2c/0x44
  bus_remove_device+0x1e4/0x200
  device_del+0x2b0/0x770
  mmc_remove_card+0xf0/0x150
  mmc_sd_detect+0x9c/0x150
  mmc_rescan+0x110/0x4f0
  process_one_work+0x3b8/0x650
  worker_thread+0xa0/0x724
  kthread+0x218/0x220
  ret_from_fork+0x10/0x38

 The buggy address belongs to the object at ffff00000a394800
  which belongs to the cache kmalloc-1k of size 1024
 The buggy address is located 552 bytes inside of
  1024-byte region [ffff00000a394800, ffff00000a394c00)
 The buggy address belongs to the page:
 page:00000000ff84ed53 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8a390
 head:00000000ff84ed53 order:3 compound_mapcount:0 compound_pincount:0
 flags: 0x3fffc0000010200(slab|head)
 raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff000009f03800
 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff00000a394900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff00000a394980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 >ffff00000a394a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                   ^
  ffff00000a394a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff00000a394b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Looking closer at the problem, it looks like a classic dangling pointer
bug. The 'struct mmc_blk_data' that is used after being freed in
mmc_blk_put() is stashed away in 'md->disk->private_data' via
mmc_blk_alloc_req() but used in mmc_blk_get() because the 'usage' count
isn't properly aligned with the lifetime of the pointer. You'd expect
the 'usage' member to be in sync with the kfree(), and it mostly is,
except that mmc_blk_get() needs to dereference the potentially freed
memory storage for the 'struct mmc_blk_data' stashed away in the
private_data member to look at 'usage' before it actually figures out if
it wants to consider it a valid pointer or not. That's not going to work
if the freed memory has been overwritten by something else after the
free, and KASAN rightly complains here.

To fix the immediate problem, let's set the private_data member to NULL
in mmc_blk_put() so that mmc_blk_get() can consider the object "on the
way out" if the pointer is NULL and not even try to look at 'usage' if
the object isn't going to be around much longer. With that set to NULL
on the last mmc_blk_put(), optimize the get path further and use a kref
underneath the 'open_lock' mutex to only up the reference count if it's
non-zero, i.e.  alive, and otherwise make mmc_blk_get() return NULL,
without actually testing the reference count if we're in the process of
removing the object from the system.

Finally, tighten the locking region on the put side to only be around
the parts that are removing the 'mmc_blk_data' from the system and
publishing that fact to the gendisk and then drop the lock as soon as we
can to avoid holding the lock around code that doesn't need it. This
fixes the KASAN issue.

Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Sujit Kautkar <sujitka@chromium.org>
Cc: Zubin Mithra <zsm@chromium.org>
Reported-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/linux-mmc/CAPDyKFryT63Jc7+DXWSpAC19qpZRqFr1orxwYGMuSqx247O8cQ@mail.gmail.com/ [1]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210623075002.1746924-2-swboyd@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-07-14 18:55:24 +02:00
Linus Torvalds
8096acd744 Networking fixes for 5.14-rc2, including fixes from bpf and netfilter.
Current release - regressions:
 
  - sock: fix parameter order in sock_setsockopt()
 
 Current release - new code bugs:
 
  - netfilter: nft_last:
      - fix incorrect arithmetic when restoring last used
      - honor NFTA_LAST_SET on restoration
 
 Previous releases - regressions:
 
  - udp: properly flush normal packet at GRO time
 
  - sfc: ensure correct number of XDP queues; don't allow enabling the
         feature if there isn't sufficient resources to Tx from any CPU
 
  - dsa: sja1105: fix address learning getting disabled on the CPU port
 
  - mptcp: addresses a rmem accounting issue that could keep packets
         in subflow receive buffers longer than necessary, delaying
 	MPTCP-level ACKs
 
  - ip_tunnel: fix mtu calculation for ETHER tunnel devices
 
  - do not reuse skbs allocated from skbuff_fclone_cache in the napi
    skb cache, we'd try to return them to the wrong slab cache
 
  - tcp: consistently disable header prediction for mptcp
 
 Previous releases - always broken:
 
  - bpf: fix subprog poke descriptor tracking use-after-free
 
  - ipv6:
       - allocate enough headroom in ip6_finish_output2() in case
         iptables TEE is used
       - tcp: drop silly ICMPv6 packet too big messages to avoid
         expensive and pointless lookups (which may serve as a DDOS
 	vector)
       - make sure fwmark is copied in SYNACK packets
       - fix 'disable_policy' for forwarded packets (align with IPv4)
 
  - netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
 
  - netfilter: conntrack: do not mark RST in the reply direction coming
       after SYN packet for an out-of-sync entry
 
  - mptcp: cleanly handle error conditions with MP_JOIN and syncookies
 
  - mptcp: fix double free when rejecting a join due to port mismatch
 
  - validate lwtstate->data before returning from skb_tunnel_info()
 
  - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
 
  - mt76: mt7921: continue to probe driver when fw already downloaded
 
  - bonding: fix multiple issues with offloading IPsec to (thru?) bond
 
  - stmmac: ptp: fix issues around Qbv support and setting time back
 
  - bcmgenet: always clear wake-up based on energy detection
 
 Misc:
 
  - sctp: move 198 addresses from unusable to private scope
 
  - ptp: support virtual clocks and timestamping
 
  - openvswitch: optimize operation for key comparison
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmDu3mMACgkQMUZtbf5S
 Irsjxg//UwcPJMYFmXV+fGkEsWYe1Kf29FcUDEeANFtbltfAcIfZ0GoTbSDRnrVb
 HcYAKcm4XRx5bWWdQrQsQq/yiLbnS/rSLc7VRB+uRHWRKl3eYcaUB2rnCXsxrjGw
 wQJgOmztDCJS4BIky24iQpF/8lg7p/Gj2Ih532gh93XiYo612FrEJKkYb2/OQfYX
 GkbnZ0kL2Y1SV+bhy6aT5azvhHKM4/3eA4fHeJ2p8e2gOZ5ni0vpX0xEzdzKOCd0
 vwR/Wu3h/+2QuFYVcSsVguuM++JXACG8MAS/Tof78dtNM4a3kQxzqeh5Bv6IkfTu
 rokENLq4pjNRy+nBAOeQZj8Jd0K0kkf/PN9WMdGQtplMoFhjjV25R6PeRrV9wwPo
 peozIz2MuQo7Kfof1D+44h2foyLfdC28/Z0CvRbDpr5EHOfYynvBbrnhzIGdQp6V
 xgftKTOdgz2Djgg8HiblZund1FA44OYerddVAASrIsnSFnIz1VLVQIsfV+GLBwwc
 FawrIZ6WfIjzRSrDGOvDsbAQI47T/1jbaPJeK6XgjWkQmjEd6UtRWRZLYCxemQEw
 4HP3sWC96BOehuD8ylipVE1oFqrxCiOB/fZxezXqjo8dSX3NLdak4cCHTHoW5SuZ
 eEAxQRaBliKd+P7hoy9cZ57CAu3zUa8kijfM5QRlCAHF+zSxaPs=
 =QFnb
 -----END PGP SIGNATURE-----

Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski.
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - sock: fix parameter order in sock_setsockopt()

  Current release - new code bugs:

   - netfilter: nft_last:
       - fix incorrect arithmetic when restoring last used
       - honor NFTA_LAST_SET on restoration

  Previous releases - regressions:

   - udp: properly flush normal packet at GRO time

   - sfc: ensure correct number of XDP queues; don't allow enabling the
     feature if there isn't sufficient resources to Tx from any CPU

   - dsa: sja1105: fix address learning getting disabled on the CPU port

   - mptcp: addresses a rmem accounting issue that could keep packets in
     subflow receive buffers longer than necessary, delaying MPTCP-level
     ACKs

   - ip_tunnel: fix mtu calculation for ETHER tunnel devices

   - do not reuse skbs allocated from skbuff_fclone_cache in the napi
     skb cache, we'd try to return them to the wrong slab cache

   - tcp: consistently disable header prediction for mptcp

  Previous releases - always broken:

   - bpf: fix subprog poke descriptor tracking use-after-free

   - ipv6:
       - allocate enough headroom in ip6_finish_output2() in case
         iptables TEE is used
       - tcp: drop silly ICMPv6 packet too big messages to avoid
         expensive and pointless lookups (which may serve as a DDOS
         vector)
       - make sure fwmark is copied in SYNACK packets
       - fix 'disable_policy' for forwarded packets (align with IPv4)

   - netfilter: conntrack:
       - do not renew entry stuck in tcp SYN_SENT state
       - do not mark RST in the reply direction coming after SYN packet
         for an out-of-sync entry

   - mptcp: cleanly handle error conditions with MP_JOIN and syncookies

   - mptcp: fix double free when rejecting a join due to port mismatch

   - validate lwtstate->data before returning from skb_tunnel_info()

   - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path

   - mt76: mt7921: continue to probe driver when fw already downloaded

   - bonding: fix multiple issues with offloading IPsec to (thru?) bond

   - stmmac: ptp: fix issues around Qbv support and setting time back

   - bcmgenet: always clear wake-up based on energy detection

  Misc:

   - sctp: move 198 addresses from unusable to private scope

   - ptp: support virtual clocks and timestamping

   - openvswitch: optimize operation for key comparison"

* tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits)
  net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
  sfc: add logs explaining XDP_TX/REDIRECT is not available
  sfc: ensure correct number of XDP queues
  sfc: fix lack of XDP TX queues - error XDP TX failed (-22)
  net: fddi: fix UAF in fza_probe
  net: dsa: sja1105: fix address learning getting disabled on the CPU port
  net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload
  net: Use nlmsg_unicast() instead of netlink_unicast()
  octeontx2-pf: Fix uninitialized boolean variable pps
  ipv6: allocate enough headroom in ip6_finish_output2()
  net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific
  net: bridge: multicast: fix MRD advertisement router port marking race
  net: bridge: multicast: fix PIM hello router port marking race
  net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340
  dsa: fix for_each_child.cocci warnings
  virtio_net: check virtqueue_add_sgs() return value
  mptcp: properly account bulk freed memory
  selftests: mptcp: fix case multiple subflows limited by server
  mptcp: avoid processing packet if a subflow reset
  mptcp: fix syncookie process if mptcp can not_accept new subflow
  ...
2021-07-14 09:24:32 -07:00
Christian Brauner
d1d488d813 fs: add vfs_parse_fs_param_source() helper
Add a simple helper that filesystems can use in their parameter parser
to parse the "source" parameter. A few places open-coded this function
and that already caused a bug in the cgroup v1 parser that we fixed.
Let's make it harder to get this wrong by introducing a helper which
performs all necessary checks.

Link: https://syzkaller.appspot.com/bug?id=6312526aba5beae046fdae8f00399f87aab48b12
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-14 09:19:06 -07:00
Christian Brauner
3b0462726e cgroup: verify that source is a string
The following sequence can be used to trigger a UAF:

    int fscontext_fd = fsopen("cgroup");
    int fd_null = open("/dev/null, O_RDONLY);
    int fsconfig(fscontext_fd, FSCONFIG_SET_FD, "source", fd_null);
    close_range(3, ~0U, 0);

The cgroup v1 specific fs parser expects a string for the "source"
parameter.  However, it is perfectly legitimate to e.g.  specify a file
descriptor for the "source" parameter.  The fs parser doesn't know what
a filesystem allows there.  So it's a bug to assume that "source" is
always of type fs_value_is_string when it can reasonably also be
fs_value_is_file.

This assumption in the cgroup code causes a UAF because struct
fs_parameter uses a union for the actual value.  Access to that union is
guarded by the param->type member.  Since the cgroup paramter parser
didn't check param->type but unconditionally moved param->string into
fc->source a close on the fscontext_fd would trigger a UAF during
put_fs_context() which frees fc->source thereby freeing the file stashed
in param->file causing a UAF during a close of the fd_null.

Fix this by verifying that param->type is actually a string and report
an error if not.

In follow up patches I'll add a new generic helper that can be used here
and by other filesystems instead of this error-prone copy-pasta fix.
But fixing it in here first makes backporting a it to stable a lot
easier.

Fixes: 8d2451f499 ("cgroup1: switch to option-by-option parsing")
Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@kernel.org>
Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-14 09:19:06 -07:00
Like Xu
7234c362cc KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on the SVM
The AMD platform does not support the functions Ah CPUID leaf. The returned
results for this entry should all remain zero just like the native does:

AMD host:
   0x0000000a 0x00: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
(uncanny) AMD guest:
   0x0000000a 0x00: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00008000

Fixes: cadbaa039b ("perf/x86/intel: Make anythread filter support conditional")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20210628074354.33848-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-14 12:17:56 -04:00
Kefeng Wang
23fa2e46a5 KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio
BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183
Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269

CPU: 5 PID: 4269 Comm: syz-executor083 Not tainted 5.10.0 #7
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132
 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x110/0x164 lib/dump_stack.c:118
 print_address_description+0x78/0x5c8 mm/kasan/report.c:385
 __kasan_report mm/kasan/report.c:545 [inline]
 kasan_report+0x148/0x1e4 mm/kasan/report.c:562
 check_memory_region_inline mm/kasan/generic.c:183 [inline]
 __asan_load8+0xb4/0xbc mm/kasan/generic.c:252
 kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183
 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739
 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
 invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
 el0_svc_common arch/arm64/kernel/syscall.c:158 [inline]
 do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220
 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367
 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383
 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670

Allocated by task 4269:
 stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121
 kasan_save_stack mm/kasan/common.c:48 [inline]
 kasan_set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461
 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475
 kmem_cache_alloc_trace include/linux/slab.h:450 [inline]
 kmalloc include/linux/slab.h:552 [inline]
 kzalloc include/linux/slab.h:664 [inline]
 kvm_vm_ioctl_register_coalesced_mmio+0x78/0x1cc arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:146
 kvm_vm_ioctl+0x7e8/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3746
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739
 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
 invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
 el0_svc_common arch/arm64/kernel/syscall.c:158 [inline]
 do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220
 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367
 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383
 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670

Freed by task 4269:
 stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121
 kasan_save_stack mm/kasan/common.c:48 [inline]
 kasan_set_track+0x38/0x6c mm/kasan/common.c:56
 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355
 __kasan_slab_free+0x124/0x150 mm/kasan/common.c:422
 kasan_slab_free+0x10/0x1c mm/kasan/common.c:431
 slab_free_hook mm/slub.c:1544 [inline]
 slab_free_freelist_hook mm/slub.c:1577 [inline]
 slab_free mm/slub.c:3142 [inline]
 kfree+0x104/0x38c mm/slub.c:4124
 coalesced_mmio_destructor+0x94/0xa4 arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:102
 kvm_iodevice_destructor include/kvm/iodev.h:61 [inline]
 kvm_io_bus_unregister_dev+0x248/0x280 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:4374
 kvm_vm_ioctl_unregister_coalesced_mmio+0x158/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:186
 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739
 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
 invoke_syscall arch/arm64/kernel/syscall.c:48 [inline]
 el0_svc_common arch/arm64/kernel/syscall.c:158 [inline]
 do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220
 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367
 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383
 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670

If kvm_io_bus_unregister_dev() return -ENOMEM, we already call kvm_iodevice_destructor()
inside this function to delete 'struct kvm_coalesced_mmio_dev *dev' from list
and free the dev, but kvm_iodevice_destructor() is called again, it will lead
the above issue.

Let's check the the return value of kvm_io_bus_unregister_dev(), only call
kvm_iodevice_destructor() if the return value is 0.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Message-Id: <20210626070304.143456-1-wangkefeng.wang@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 5d3c4c7938 ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed", 2021-04-20)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-14 12:17:56 -04:00
Sean Christopherson
76ff371b67 KVM: SVM: Revert clearing of C-bit on GPA in #NPF handler
Don't clear the C-bit in the #NPF handler, as it is a legal GPA bit for
non-SEV guests, and for SEV guests the C-bit is dropped before the GPA
hits the NPT in hardware.  Clearing the bit for non-SEV guests causes KVM
to mishandle #NPFs with that collide with the host's C-bit.

Although the APM doesn't explicitly state that the C-bit is not reserved
for non-SEV, Tom Lendacky confirmed that the following snippet about the
effective reduction due to the C-bit does indeed apply only to SEV guests.

  Note that because guest physical addresses are always translated
  through the nested page tables, the size of the guest physical address
  space is not impacted by any physical address space reduction indicated
  in CPUID 8000_001F[EBX]. If the C-bit is a physical address bit however,
  the guest physical address space is effectively reduced by 1 bit.

And for SEV guests, the APM clearly states that the bit is dropped before
walking the nested page tables.

  If the C-bit is an address bit, this bit is masked from the guest
  physical address when it is translated through the nested page tables.
  Consequently, the hypervisor does not need to be aware of which pages
  the guest has chosen to mark private.

Note, the bogus C-bit clearing was removed from legacy #PF handler in
commit 6d1b867d04 ("KVM: SVM: Don't strip the C-bit from CR2 on #PF
interception").

Fixes: 0ede79e132 ("KVM: SVM: Clear C-bit from the page fault address")
Cc: Peter Gonda <pgonda@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210625020354.431829-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-14 12:17:56 -04:00
Sean Christopherson
fc9bf2e087 KVM: x86/mmu: Do not apply HPA (memory encryption) mask to GPAs
Ignore "dynamic" host adjustments to the physical address mask when
generating the masks for guest PTEs, i.e. the guest PA masks.  The host
physical address space and guest physical address space are two different
beasts, e.g. even though SEV's C-bit is the same bit location for both
host and guest, disabling SME in the host (which clears shadow_me_mask)
does not affect the guest PTE->GPA "translation".

For non-SEV guests, not dropping bits is the correct behavior.  Assuming
KVM and userspace correctly enumerate/configure guest MAXPHYADDR, bits
that are lost as collateral damage from memory encryption are treated as
reserved bits, i.e. KVM will never get to the point where it attempts to
generate a gfn using the affected bits.  And if userspace wants to create
a bogus vCPU, then userspace gets to deal with the fallout of hardware
doing odd things with bad GPAs.

For SEV guests, not dropping the C-bit is technically wrong, but it's a
moot point because KVM can't read SEV guest's page tables in any case
since they're always encrypted.  Not to mention that the current KVM code
is also broken since sme_me_mask does not have to be non-zero for SEV to
be supported by KVM.  The proper fix would be to teach all of KVM to
correctly handle guest private memory, but that's a task for the future.

Fixes: d0ec49d4de ("kvm/x86/svm: Support Secure Memory Encryption within KVM")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-5-seanjc@google.com>
[Use a new header instead of adding header guards to paging_tmpl.h. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-14 12:17:56 -04:00
Sean Christopherson
e39f00f60e KVM: x86: Use kernel's x86_phys_bits to handle reduced MAXPHYADDR
Use boot_cpu_data.x86_phys_bits instead of the raw CPUID information to
enumerate the MAXPHYADDR for KVM guests when TDP is disabled (the guest
version is only relevant to NPT/TDP).

When using shadow paging, any reductions to the host's MAXPHYADDR apply
to KVM and its guests as well, i.e. using the raw CPUID info will cause
KVM to misreport the number of PA bits available to the guest.

Unconditionally zero out the "Physical Address bit reduction" entry.
For !TDP, the adjustment is already done, and for TDP enumerating the
host's reduction is wrong as the reduction does not apply to GPAs.

Fixes: 9af9b94068 ("x86/cpu/AMD: Handle SME reduction in physical address size")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-14 12:17:55 -04:00
Sean Christopherson
4bf48e3c0a KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabled
Ignore the guest MAXPHYADDR reported by CPUID.0x8000_0008 if TDP, i.e.
NPT, is disabled, and instead use the host's MAXPHYADDR.  Per AMD'S APM:

  Maximum guest physical address size in bits. This number applies only
  to guests using nested paging. When this field is zero, refer to the
  PhysAddrSize field for the maximum guest physical address size.

Fixes: 24c82e576b ("KVM: Sanitize cpuid")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210623230552.4027702-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-14 12:17:55 -04:00