Commit graph

1,059,104 commits

Author SHA1 Message Date
Jason Ekstrand
dd4f1bbae8 drm/i915/gem: Remove engine auto-magic with FENCE_SUBMIT (v2)
Even though FENCE_SUBMIT is only documented to wait until the request in
the in-fence starts instead of waiting until it completes, it has a bit
more magic than that.  If FENCE_SUBMIT is used to submit something to a
balanced engine, we would wait to assign engines until the primary
request was ready to start and then attempt to assign it to a different
engine than the primary.  There is an IGT test (the bonded-slice subtest
of gem_exec_balancer) which exercises this by submitting a primary batch
to a specific VCS and then using FENCE_SUBMIT to submit a secondary
which can run on any VCS and have i915 figure out which VCS to run it on
such that they can run in parallel.

However, this functionality has never been used in the real world.  The
media driver (the only user of FENCE_SUBMIT) always picks exactly two
physical engines to bond and never asks us to pick which to use.

v2 (Daniel Vetter):
 - Mention the exact IGT test this breaks

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-11-jason@jlekstrand.net
2021-07-08 19:44:31 +02:00
Jason Ekstrand
521695c6f1 drm/i915/gem: Disallow bonding of virtual engines (v3)
This adds a bunch of complexity which the media driver has never
actually used.  The media driver does technically bond a balanced engine
to another engine but the balanced engine only has one engine in the
sibling set.  This doesn't actually result in a virtual engine.

This functionality was originally added to handle cases where we may
have more than two video engines and media might want to load-balance
their bonded submits by, for instance, submitting to a balanced vcs0-1
as the primary and then vcs2-3 as the secondary.  However, no such
hardware has shipped thus far and, if we ever want to enable such
use-cases in the future, we'll use the up-and-coming parallel submit API
which targets GuC submission.

This makes I915_CONTEXT_ENGINES_EXT_BOND a total no-op.  We leave the
validation code in place in case we ever decide we want to do something
interesting with the bonding information.

v2 (Jason Ekstrand):
 - Don't delete quite as much code.

v3 (Tvrtko Ursulin):
 - Add some history to the commit message

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-10-jason@jlekstrand.net
2021-07-08 19:44:25 +02:00
Jason Ekstrand
c7a71fc8ee drm/i915: Drop getparam support for I915_CONTEXT_PARAM_ENGINES
This has never been used by any userspace except IGT and provides no
real functionality beyond parroting back parameters userspace passed in
as part of context creation or via setparam.  If the context is in
legacy mode (where you use I915_EXEC_RENDER and friends), it returns
success with zero data so it's not useful for discovering what engines
are in the context.  It's also not a replacement for the recently
removed I915_CONTEXT_CLONE_ENGINES because it doesn't return any of the
balancing or bonding information.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-9-jason@jlekstrand.net
2021-07-08 19:44:18 +02:00
Jason Ekstrand
00dae4d3d3 drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)
This API is entirely unnecessary and I'd love to get rid of it.  If
userspace wants a single timeline across multiple contexts, they can
either use implicit synchronization or a syncobj, both of which existed
at the time this feature landed.  The justification given at the time
was that it would help GL drivers which are inherently single-timeline.
However, neither of our GL drivers actually wanted the feature.  i965
was already in maintenance mode at the time and iris uses syncobj for
everything.

Unfortunately, as much as I'd love to get rid of it, it is used by the
media driver so we can't do that.  We can, however, do the next-best
thing which is to embed a syncobj in the context and do exactly what
we'd expect from userspace internally.  This isn't an entirely identical
implementation because it's no longer atomic if userspace races with
itself by calling execbuffer2 twice simultaneously from different
threads.  It won't crash in that case; it just doesn't guarantee any
ordering between those two submits.  It also means that sync files
exported from different engines on a SINGLE_TIMELINE context will have
different fence contexts.  This is visible to userspace if it looks at
the obj_name field of sync_fence_info.

Moving SINGLE_TIMELINE to a syncobj emulation has a couple of technical
advantages beyond mere annoyance.  One is that intel_timeline is no
longer an api-visible object and can remain entirely an implementation
detail.  This may be advantageous as we make scheduler changes going
forward.  Second is that, together with deleting the CLONE_CONTEXT API,
we should now have a 1:1 mapping between intel_context and
intel_timeline which may help us reduce locking.

v2 (Tvrtko Ursulin):
 - Update the comment on i915_gem_context::syncobj to mention that it's
   an emulation and the possible race if userspace calls execbuffer2
   twice on the same context concurrently.
v2 (Jason Ekstrand):
 - Wrap the checks for eb.gem_context->syncobj in unlikely()
 - Drop the dma_fence reference
 - Improved commit message

v3 (Jason Ekstrand):
 - Move the dma_fence_put() to before the error exit

v4 (Tvrtko Ursulin):
 - Add a comment about fence contexts to the commit message

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-8-jason@jlekstrand.net
2021-07-08 19:44:11 +02:00
Jason Ekstrand
4a766ae40e drm/i915: Drop the CONTEXT_CLONE API (v2)
This API allows one context to grab bits out of another context upon
creation.  It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM.  However, it's never been used by any
real userspace.  It's used by a few IGT tests and that's it.  Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.

There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines.  However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace.  Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally.  It also doesn't add any functionality that the client can't
get in other ways.  If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.

v2 (Jason Ekstrand):
 - More detailed commit message

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net
2021-07-08 19:44:04 +02:00
Jason Ekstrand
8cc256a24d drm/i915/gem: Return void from context_apply_all
None of the callbacks we use with it return an error code anymore; they
all return 0 unconditionally.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-6-jason@jlekstrand.net
2021-07-08 19:43:57 +02:00
Jason Ekstrand
677db6adc5 drm/i915/gem: Set the watchdog timeout directly in intel_context_set_gem (v2)
Instead of handling it like a context param, unconditionally set it when
intel_contexts are created.  For years we've had the idea of a watchdog
uAPI floating about. The aim was for media, so that they could set very
tight deadlines for their transcodes jobs, so that if you have a corrupt
bitstream (especially for decoding) you don't hang your desktop too
hard.  But it's been stuck in limbo since forever, and this simplifies
things a bit in preparation for the proto-context work.  If we decide to
actually make said uAPI a reality, we can do it through the proto-
context easily enough.

This does mean that we move from reading the request_timeout_ms param
once per engine when engines are created instead of once at context
creation.  If someone changes request_timeout_ms between creating a
context and setting engines, it will mean that they get the new timeout.
If someone races setting request_timeout_ms and context creation, they
can theoretically end up with different timeouts.  However, since both
of these are fairly harmless and require changing kernel params, we
don't care.

v2 (Tvrtko Ursulin):
 - Add a comment about races with request_timeout_ms

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-5-jason@jlekstrand.net
2021-07-08 19:43:49 +02:00
Jason Ekstrand
6ff6d61dd2 drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP
The idea behind this param is to support OpenCL drivers with relocations
because OpenCL reserves 0x0 for NULL and, if we placed memory there, it
would confuse CL kernels.  It was originally sent out as part of a patch
series including libdrm [1] and Beignet [2] support.  However, the
libdrm and Beignet patches never landed in their respective upstream
projects so this API has never been used.  It's never been used in Mesa
or any other driver, either.

Dropping this API allows us to delete a small bit of code.

[1]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067030.html
[2]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067031.html

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-4-jason@jlekstrand.net
2021-07-08 19:43:43 +02:00
Jason Ekstrand
74e4b90988 drm/i915: Stop storing the ring size in the ring pointer (v3)
Previously, we were storing the ring size in the ring pointer before it
was actually allocated.  We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT.  This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.

v2 (Daniel Vetter):
 - Replace 512 * SZ_4K with SZ_2M

v2 (Jason Ekstrand):
 - Rebase on top of page migration code

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net
2021-07-08 19:43:35 +02:00
Jason Ekstrand
fe4751c3d5 drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE
This reverts commit 88be76cdaf ("drm/i915: Allow userspace to specify
ringsize on construction").  This API was originally added for OpenCL
but the compute-runtime PR has sat open for a year without action so we
can still pull it out if we want.  I argue we should drop it for three
reasons:

 1. If the compute-runtime PR has sat open for a year, this clearly
    isn't that important.

 2. It's a very leaky API.  Ring size is an implementation detail of the
    current execlist scheduler and really only makes sense there.  It
    can't apply to the older ring-buffer scheduler on pre-execlist
    hardware because that's shared across all contexts and it won't
    apply to the GuC scheduler that's in the pipeline.

 3. Having userspace set a ring size in bytes is a bad solution to the
    problem of having too small a ring.  There is no way that userspace
    has the information to know how to properly set the ring size so
    it's just going to detect the feature and always set it to the
    maximum of 512K.  This is what the compute-runtime PR does.  The
    scheduler in i915, on the other hand, does have the information to
    make an informed choice.  It could detect if the ring size is a
    problem and grow it itself.  Or, if that's too hard, we could just
    increase the default size from 16K to 32K or even 64K instead of
    relying on userspace to do it.

Let's drop this API for now and, if someone decides they really care
about solving this problem, they can do it properly.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-2-jason@jlekstrand.net
2021-07-08 19:43:27 +02:00
John Harrison
520dfc807d drm/i915/adlp: Add ADL-P GuC/HuC firmware files
Add ADL-P to the list of supported GuC and HuC firmware versions. For
HuC, it reuses the existing TGL firmware file. For GuC, there is a
dedicated firmware release.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-3-John.C.Harrison@Intel.com
2021-07-08 10:09:56 -07:00
John Harrison
4a83272123 drm/i915/huc: Update TGL and friends to HuC 7.9.3
A new HuC is available for TGL and compatible platforms, so switch to
using it.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-2-John.C.Harrison@Intel.com
2021-07-08 10:09:55 -07:00
Baokun Li
3ecda64475 ftrace: Use list_move instead of list_del/list_add
Using list_move() instead of list_del() + list_add().

Link: https://lkml.kernel.org/r/20210608031108.2820996-1-libaokun1@huawei.com

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-08 13:02:58 -04:00
Steven Rostedt (VMware)
fa73514d5e tracing/selftests: Add tests to test histogram sym and sym-offset modifiers
Add a test to the tracing selftests that will catch if the .sym or
.sym-offset modifiers break in the future.

Link: https://lkml.kernel.org/r/20210707121451.101a1002@oasis.local.home

Acked-by: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-08 13:01:51 -04:00
Petr Mladek
11e4b63abb printk/console: Check consistent sequence number when handling race in console_unlock()
The standard printk() tries to flush the message to the console
immediately. It tries to take the console lock. If the lock is
already taken then the current owner is responsible for flushing
even the new message.

There is a small race window between checking whether a new message is
available and releasing the console lock. It is solved by re-checking
the state after releasing the console lock. If the check is positive
then console_unlock() tries to take the lock again and process the new
message as well.

The commit 996e966640 ("printk: remove logbuf_lock") causes that
console_seq is not longer read atomically. As a result, the re-check might
be done with an inconsistent 64-bit index.

Solve it by using the last sequence number that has been checked under
the console lock. In the worst case, it will take the lock again only
to realized that the new message has already been proceed. But it
was possible even before.

The variable next_seq is marked as __maybe_unused to call down compiler
warning when CONFIG_PRINTK is not defined.

Fixes: commit 996e966640 ("printk: remove logbuf_lock")
Reported-by: kernel test robot <lkp@intel.com>  # unused next_seq warning
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20210702150657.26760-1-pmladek@suse.com
2021-07-08 18:45:35 +02:00
Matt Roper
eafaa3e962 drm/i915: Handle cdclk crawling flag in standard manner
The 'has_cdclk_crawl' field in our device info structure is a boolean
flag and doesn't need a whole u8.  Add it as another 1-bit feature flag
and move it to the display section.  While we're at it, replace the
has_cdclk_crawl() function with a macro for consistency with our
handling of other feature flags.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707234206.2002849-1-matthew.d.roper@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-07-08 07:42:57 -07:00
Uwe Kleine-König
f4a8e31ed8 pwm: ep93xx: Ensure configuring period and duty_cycle isn't wrongly skipped
As the last call to ep93xx_pwm_apply() might have exited early if
state->enabled was false, the values for period and duty_cycle stored in
pwm->state might not have been written to hardware and it must be
ensured that they are configured before enabling the PWM.

Fixes: 6d45374af5 ("pwm: ep93xx: Implement .apply callback")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-07-08 16:09:30 +02:00
Uwe Kleine-König
7d6d4aaf28 pwm: berlin: Ensure configuring period and duty_cycle isn't wrongly skipped
As the last call to berlin_pwm_apply() might have exited early if
state->enabled was false, the values for period and duty_cycle stored in
pwm->state might not have been written to hardware and it must be
ensured that they are configured before enabling the PWM.

Fixes: 30dffb42fc ("pwm: berlin: Implement .apply() callback")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-07-08 16:09:17 +02:00
Uwe Kleine-König
25f70b8f3d pwm: tiecap: Ensure configuring period and duty_cycle isn't wrongly skipped
As the last call to ecap_pwm_apply() might have exited early if
state->enabled was false, the values for period and duty_cycle stored in
pwm->state might not have been written to hardware and it must be
ensured that they are configured before enabling the PWM.

Fixes: 0ca7acd847 ("pwm: tiecap: Implement .apply() callback")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-07-08 16:08:54 +02:00
Uwe Kleine-König
fe8255f80b pwm: spear: Ensure configuring period and duty_cycle isn't wrongly skipped
As the last call to spear_pwm_apply() might have exited early if
state->enabled was false, the values for period and duty_cycle stored in
pwm->state might not have been written to hardware and it must be
ensured that they are configured before enabling the PWM.

Fixes: 98761ce4b9 ("pwm: spear: Implement .apply() callback")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-07-08 16:08:38 +02:00
Uwe Kleine-König
65e2e6c1c2 pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped
As the last call to sprd_pwm_apply() might have exited early if
state->enabled was false, the values for period and duty_cycle stored in
pwm->state might not have been written to hardware and it must be
ensured that they are configured before enabling the PWM.

Fixes: 8aae4b02e8 ("pwm: sprd: Add Spreadtrum PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-07-08 16:08:08 +02:00
Valentin Schneider
2c669ef697 powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
Powerpc currently resets a CPU's idle task preempt_count to 0 before
said task starts executing the secondary startup routine (and becomes an
idle task proper).

This conflicts with commit f1a0a376ca ("sched/core: Initialize the
idle task with preemption disabled").

which initializes all of the idle tasks' preempt_count to
PREEMPT_DISABLED during smp_init(). Note that this was superfluous
before said commit, as back then the hotplug machinery would invoke
init_idle() via idle_thread_get(), which would have already reset the
CPU's idle task's preempt_count to PREEMPT_ENABLED.

Get rid of this preempt_count write.

Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210707183831.2106509-1-valentin.schneider@arm.com
2021-07-08 23:38:10 +10:00
Sven Schnelle
779df22487 s390/vdso: add minimal compat vdso
Add a small vdso for 31 bit compat application that provides
trampolines for calls to sigreturn,rt_sigreturn,syscall_restart.
This is requird for moving these syscalls away from the signal
frame to the vdso. Note that this patch effectively disables
CONFIG_COMPAT when using clang to compile the kernel. clang
doesn't support 31 bit mode.

We want to redirect sigreturn and restart_syscall to the vdso. However,
the kernel cannot parse the ELF vdso file, so we need to generate header
files which contain the offsets of the syscall instructions in the vdso
page.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:28 +02:00
Sven Schnelle
43e1f76b0b s390/vdso: rename VDSO64_LBASE to VDSO_LBASE
Will be used by both vdso32 and vdso64, so change the name.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:28 +02:00
Sven Schnelle
686341f254 s390/vdso64: add sigreturn,rt_sigreturn and restart_syscall
Add minimalistic trampolines to vdso64 so we can return from signal
without using the stack which requires pgm check handler hacks when
NX is enabled.

restart_syscall will be called from vdso to work around the architectural
limitation that the syscall number might be encoded in the svc instruction,
and therefore can not be changed.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:28 +02:00
Sven Schnelle
d57778feb9 s390/vdso: always enable vdso
With the upcoming move of the svc sigreturn instruction from
the signal frame to vdso we need to have vdso always enabled.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:28 +02:00
Heiko Carstens
b9639b3155 s390/ap: get rid of register asm
Using register asm statements has been proven to be very error prone,
especially when using code instrumentation where gcc may add function
calls, which clobbers register contents in an unexpected way.

Therefore get rid of register asm statements in ap code. There are also
potential bugs, depending on inline decisions of the compiler.

E.g. for:

static inline struct ap_queue_status ap_tapq(ap_qid_t qid, unsigned long *info)
{
	register unsigned long reg0 asm ("0") = qid;
	register struct ap_queue_status reg1 asm ("1");
	register unsigned long reg2 asm ("2");

	asm volatile(".long 0xb2af0000"         /* PQAP(TAPQ) */
		     : "=d" (reg1), "=d" (reg2)
		     : "d" (reg0)
		     : "cc");
	if (info)
		*info = reg2;
	return reg1;
}

In case of KCOV the "if (info)" line could cause a generated function
call, which could clobber the contents of both reg2, and reg1.

Similar can happen in case of KASAN for the "*info = reg2" line.

Even though compilers will likely inline the function and optimize
things away, this is not guaranteed.

To get rid of this bug class, simply get rid of register asm constructs.

Note: The inline function ap_dqap() will be handled in a
separate patch because this one requires an addressing of the
odd register of a register pair (which is done with %N[xxx] in
the assembler code) and that's currently not supported by clang.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:27 +02:00
Sven Schnelle
0aa4ff7688 s390/irq: remove HAVE_IRQ_EXIT_ON_IRQ_STACK
This is no longer true since we switched to generic entry. The code
switches to the IRQ stack before calling do_IRQ, but switches back
to the kernel stack before calling irq_exit().

Fixes: 56e62a7370 ("s390: convert to generic entry")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:27 +02:00
Ilya Leoshkevich
b8e9cc20b8 s390/traps: do not test MONITOR CALL without CONFIG_BUG
tinyconfig fails to boot, because without CONFIG_BUG report_bug()
always returns BUG_TRAP_TYPE_BUG, which causes mc 0,0 in
test_monitor_call() to panic. Fix by skipping the test without
CONFIG_BUG.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:27 +02:00
Harald Freudenberger
1f0d22defd s390/ap: Rework ap_dqap to deal with messages greater than recv buffer
Rework of the ap_dqap() inline function with the dqap inline assembler
invocation and the caller code in ap_queue.c to be able to handle
replies which exceed the receive buffer size.

ap_dqap() now provides two additional parameters to handle together
with the caller the case where a reply in the firmware queue entry
exceeds the given message buffer size. It depends on the caller how to
exactly handle this. The behavior implemented now by ap_sm_recv() in
ap_queue.c is to simple purge this entry from the firmware queue and
let the caller 'receive' a -EMSGSIZE for the request without
delivering any reply data - not even a truncated reply message.

However, the reworked ap_dqap() could now get invoked in a way that
the message is received in multiple parts and the caller assembles the
parts into one reply message.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-07-08 15:37:27 +02:00
Christian König
3e1ad79bf6 drm/nouveau: always wait for the exclusive fence
Drivers also need to to sync to the exclusive fence when
a shared one is present.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-4-christian.koenig@amd.com
2021-07-08 14:59:08 +02:00
Christian König
9d38814d1e dma-buf: fix dma_resv_test_signaled test_all handling v2
As the name implies if testing all fences is requested we
should indeed test all fences and not skip the exclusive
one because we see shared ones.

v2: fix logic once more

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-3-christian.koenig@amd.com
2021-07-08 14:59:08 +02:00
Theodore Ts'o
0705e8d1e2 ext4: inline jbd2_journal_[un]register_shrinker()
The function jbd2_journal_unregister_shrinker() was getting called
twice when the file system was getting unmounted.  On Power and ARM
platforms this was causing kernel crash when unmounting the file
system, when a percpu_counter was destroyed twice.

Fix this by removing jbd2_journal_[un]register_shrinker() functions,
and inlining the shrinker setup and teardown into
journal_init_common() and jbd2_journal_destroy().  This means that
ext4 and ocfs2 now no longer need to know about registering and
unregistering jbd2's shrinker.

Also, while we're at it, rename the percpu counter from
j_jh_shrink_count to j_checkpoint_jh_count, since this makes it
clearer what this counter is intended to track.

Link: https://lore.kernel.org/r/20210705145025.3363130-1-tytso@mit.edu
Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-07-08 08:37:31 -04:00
Theodore Ts'o
0955901908 ext4: fix flags validity checking for EXT4_IOC_CHECKPOINT
Use the correct bitmask when checking for any not-yet-supported flags.

Link: https://lore.kernel.org/r/20210702173425.1276158-1-tytso@mit.edu
Fixes: 351a0a3fbc ("ext4: add ioctl EXT4_IOC_CHECKPOINT")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Leah Rumancik <leah.rumancik@gmail.com>
2021-07-08 08:37:31 -04:00
Theodore Ts'o
61bb4a1c41 ext4: fix possible UAF when remounting r/o a mmp-protected file system
After commit 618f003199 ("ext4: fix memory leak in
ext4_fill_super"), after the file system is remounted read-only, there
is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to
point at freed memory, which the call to ext4_stop_mmpd() can trip
over.

Fix this by only allowing kmmpd() to exit when it is stopped via
ext4_stop_mmpd().

Link: https://lore.kernel.org/r/20210707002433.3719773-1-tytso@mit.edu
Reported-by: Ye Bin <yebin10@huawei.com>
Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2021-07-08 08:36:09 -04:00
Noralf Trønnes
a0356899eb drm/gud: Add async_flush module parameter
Provide a way for userspace to choose synchronous flushing/pageflips.
This helps save CPU and power.

It is also useful for test scripts since userspace can know when a flush
has happended and wait before doing the next visual test.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-2-noralf@tronnes.org
2021-07-08 14:34:28 +02:00
Noralf Trønnes
b3f4ef6693 drm/gud: Add Raspberry Pi Pico ID
Add VID/PID for the Raspberry Pi Pico implementation.
Source: https://github.com/notro/gud-pico

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-1-noralf@tronnes.org
2021-07-08 14:33:37 +02:00
Noralf Trønnes
2eecd93b74 drm/gud: Use scatter-gather USB bulk transfer
There'a limit to how big a kmalloc buffer can be, and as memory gets
fragmented it becomes more difficult to get big buffers. The downside of
smaller buffers is that the driver has to split the transfer up which
hampers performance. Compression might also take a hit because of the
splitting.

Solve this by allocating the transfer buffer using vmalloc and create a
SG table to be passed on to the USB subsystem. vmalloc_32() is used to
avoid DMA bounce buffers on USB controllers that can only access 32-bit
addresses.

This also solves the problem that split transfers can give host side
tearing since flushing is decoupled from rendering.

usb_sg_wait() doesn't have timeout handling builtin, so it is wrapped in
a timer like 4 out of 6 users in the kernel have done.

v2:
- Use DIV_ROUND_UP (Linus)
- Add timeout note to the commit log (Linus)
- Expand note about upper buffer limit (Linus)
- Change var name s/timer/ctx/ in gud_usb_bulk_timeout()

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-2-noralf@tronnes.org
2021-07-08 14:32:32 +02:00
Noralf Trønnes
f8ac863b6a drm/gud: Free buffers on device removal
Free transfer and compression buffers on device removal instead of at
DRM device removal time. This ensures that the usual 2x8MB buffers are
released when the device is unplugged and not kept around should
userspace keep the DRM device fd open.

At least Ubuntu 20.04 doesn't release the DRM device on unplug.

The damage_lock mutex is not destroyed because it is used outside the
drm_dev_enter/exit block in gud_pipe_update(). AFAICT it's possible for
an open fbdev descriptor to trigger a commit after the USB device is gone.

v2: Don't destroy damage_lock

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-1-noralf@tronnes.org
2021-07-08 14:31:19 +02:00
Thomas Zimmermann
39a364a19e drm/hisilicon/hibmc: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706075425.9257-1-tzimmermann@suse.de
2021-07-08 14:12:43 +02:00
Thomas Zimmermann
b0fee7df43 drm/vmwgfx: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

Vmwgfx already uses Linux IRQ functions. All that's left to replace
is the reference to struct drm_device.irq. Use irq value of struct
pci_dev instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706072253.6844-1-tzimmermann@suse.de
2021-07-08 14:11:43 +02:00
Thomas Zimmermann
9ca41d1fcf drm/arm/komeda: Don't include drm_irq.h
The header file is not required. Don't include it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706072712.7558-1-tzimmermann@suse.de
2021-07-08 14:10:47 +02:00
Thomas Zimmermann
65a969655c drm/meson: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706074545.8763-1-tzimmermann@suse.de
2021-07-08 14:09:34 +02:00
Thomas Zimmermann
7915d56129 drm/qxl: Remove empty qxl_gem_prime_mmap()
The function qxl_gem_prime_mmap() returns an error. The two callers
of gem_prime_mmap are drm_fbdev_fb_mmap() and drm_gem_dmabuf_mmap(),
which both already handle NULL-callbacks with an error code. So clear
gem_prime_mmap in qxl and remove qxl_gem_prime_mmap().

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624090500.8320-1-tzimmermann@suse.de
2021-07-08 14:06:56 +02:00
David Hildenbrand
db7b337709 virtio-mem: prioritize unplug from ZONE_MOVABLE in Big Block Mode
Let's handle unplug in Big Block Mode similar to Sub Block Mode --
prioritize memory blocks onlined to ZONE_MOVABLE.

We won't care further about big blocks with mixed zones, as it's
rather a corner case that won't matter in practice.

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-8-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-08 07:49:02 -04:00
David Hildenbrand
c6bc1422fa virtio-mem: simplify high-level unplug handling in Big Block Mode
Let's simplify high-level big block selection when unplugging in
Big Block Mode.

Combine handling of offline and online blocks. We can get rid of
virtio_mem_bbm_bb_is_offline() and simply use
virtio_mem_bbm_offline_remove_and_unplug_bb(), as that already tolerates
offline parts.

We can race with concurrent onlining/offlining either way, so we don;t
have to be super correct by failing if an offline big block we'd like to
unplug just got (partially) onlined.

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-7-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-08 07:49:02 -04:00
David Hildenbrand
c740bb97cc virtio-mem: prioritize unplug from ZONE_MOVABLE in Sub Block Mode
Until now, memory provided by a single virtio-mem device was usually
either onlined completely to ZONE_MOVABLE (online_movable) or to
ZONE_NORMAL (online_kernel); however, that will change in the future.

There are two reasons why we want to track to which zone a memory blocks
belongs to and prioritize ZONE_MOVABLE blocks:

1) Memory managed by ZONE_MOVABLE can more likely get unplugged, therefore,
   resulting in a faster memory hotunplug process. Further, we can more
   reliably unplug and remove complete memory blocks, removing metadata
   allocated for the whole memory block.

2) We want to avoid corner cases where unplugging with the current scheme
   (highest to lowest address) could result in accidential zone imbalances,
   whereby we remove too much ZONE_NORMAL memory for ZONE_MOVABLE memory
   of the same device.

Let's track the zone via memory block states and try unplug from
ZONE_MOVABLE first. Rename VIRTIO_MEM_SBM_MB_ONLINE* to
VIRTIO_MEM_SBM_MB_KERNEL* to avoid even longer state names.

In commit 27f852795a ("virtio-mem: don't special-case ZONE_MOVABLE"),
we removed slightly similar tracking for fully plugged memory blocks to
support unplugging from ZONE_MOVABLE at all -- as we didn't allow partially
plugged memory blocks in ZONE_MOVABLE before that. That commit already
mentioned "In the future, we might want to remember the zone again and use
the information when (un)plugging memory."

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-08 07:49:02 -04:00
David Hildenbrand
5304ca3dd7 virtio-mem: simplify high-level unplug handling in Sub Block Mode
Let's simplify by introducing a new virtio_mem_sbm_unplug_any_sb(),
similar to virtio_mem_sbm_plug_any_sb(), to simplify high-level memory
block selection when unplugging in Sub Block Mode.

Rename existing virtio_mem_sbm_unplug_any_sb() to
virtio_mem_sbm_unplug_any_sb_raw().

The only change is that we now temporarily unlock the hotplug mutex around
cond_resched() when processing offline memory blocks, which doesn't
make a real difference as we already have to temporarily unlock in
virtio_mem_sbm_unplug_any_sb_offline() when removing a memory block.

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-5-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-08 07:49:02 -04:00
David Hildenbrand
f4cf803dff virtio-mem: simplify high-level plug handling in Sub Block Mode
Let's simplify high-level memory block selection when plugging in Sub
Block Mode.

No need for two separate loops when selecting memory blocks for plugging
memory. Avoid passing the "online" state by simply obtaining the state
in virtio_mem_sbm_plug_any_sb().

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-4-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-08 07:49:02 -04:00
David Hildenbrand
49d42872d5 virtio-mem: use page_zonenum() in virtio_mem_fake_offline()
Let's use page_zonenum() instead of zone_idx(page_zone()).

Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20210602185720.31821-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-08 07:49:02 -04:00