Fourth set of patches for v5.16. Mostly fixes this time, wcn36xx and
iwlwifi have some new features but nothing really out of ordinary. We
have one conflict with kspp tree.
Conflicts:
kspp tree has a conflict in drivers/net/wireless/intel/iwlwifi/fw/api/tx.h:
https://lkml.kernel.org/r/20211028192934.01520d7e@canb.auug.org.au
Major changes:
ath11k
* fix QCA6390 A-MSDU handling (CVE-2020-24588)
wcn36xx
* enable hardware scan offload for 5Ghz band
* add missing 5GHz channels 136 and 144
iwlwifi
* support a new ACPI table revision
* improvements in the device selection code
* new hardware support
* support for WiFi 6E enablement via BIOS
* support firmware API version 67
* support for 160MHz in ranging measurements
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmF7+wUVHGt2YWxvQGNv
ZGVhdXJvcmEub3JnAAoJEG4XJFUm622bRGoH/0XrfEwzH4iR3j/xRPTBMJjBZO/Z
ZN0PQ2L8402c7iG9M0psSFOdqFe8vtKzuuV367ifQzwmGFoQIzAckL9nCA1yFUBg
EXF3nP0/mb8R0w6rzjkLUQ9EejLLeX35Kh6B1oLgglPdLvE+Yv6/Iqs1yOHwHZFF
RBHqyBc9YcQBuhah4JPqIXr8tUCkRgWwK/VvCwhoGDWimBlH7LhgOHTFQhVJ+Z8b
/RsLS2iIv4wGkiQX9cwilmX3QSz/jK0od1FXHW347v+nm96Fs3d2F1juAyhE6io2
xN1qzEU4SQ90byxhCsBOvZC6JTpRJvw49XME76MrzaLP+FuZ8I2zdAe7wd8=
=Y1xX
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-10-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.16
Fourth set of patches for v5.16. Mostly fixes this time, wcn36xx and
iwlwifi have some new features but nothing really out of ordinary.
We have one conflict with kspp tree.
Major changes:
ath11k
* fix QCA6390 A-MSDU handling (CVE-2020-24588)
wcn36xx
* enable hardware scan offload for 5Ghz band
* add missing 5GHz channels 136 and 144
iwlwifi
* support a new ACPI table revision
* improvements in the device selection code
* new hardware support
* support for WiFi 6E enablement via BIOS
* support firmware API version 67
* support for 160MHz in ranging measurements
====================
Link: https://lore.kernel.org/r/20211029134707.DE2B0C4360D@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan reported that because KASAN_SHADOW_OFFSET was not defined in
Kconfig, it prevents asan-stack from getting disabled with clang even
when CONFIG_KASAN_STACK is disabled: fix this by defining the
corresponding config.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When calling this function, all the shadow memory is already populated
with kasan_early_shadow_pte which has PAGE_KERNEL protection.
kasan_populate_early_shadow write-protects the mapping of the range
of addresses passed in argument in zero_pte_populate, which actually
write-protects all the shadow memory mapping since kasan_early_shadow_pte
is used for all the shadow memory at this point. And then when using
memblock API to populate the shadow memory, the first write access to the
kernel stack triggers a trap. This becomes visible with the next commit
that contains a fix for asan-stack.
We already manually populate all the shadow memory in kasan_early_init
and we write-protect kasan_early_shadow_pte at the end of kasan_init
which makes the calls to kasan_populate_early_shadow superfluous so
we can remove them.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: e178d670f2 ("riscv/kasan: add KASAN_VMALLOC support")
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We can use GPI DMA for devices where it is enabled by firmware. Add
support for this mode
Signed-off-by: Vinod Koul <vkoul@kernel.org>
--
-Changes since v4:
- Fix the kbuild bot warning
-Changes since v3:
- Drop merged spi core, geni patches
- Remove global structs and use local variables instead
- modularize code more as suggested by Doug
- fix kbuild bot warning
drivers/spi/spi-geni-qcom.c | 254 +++++++++++++++++++++++++++++++++---
1 file changed, 239 insertions(+), 15 deletions(-)
Link: https://lore.kernel.org/r/20211020060954.1531783-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In case that there are other components assigned to runtime device,
depending on order dummy component can override their params with its
own, which shouldn't happen. Check if there are any other components
assigned to rtd and if so, skip setting hwparams.
Occurs when using topology where 'snd-soc-dummy' gets assigned by
default as codec and platform component.
Alternative approach would be to copy whole dummy handling and rename it
to "snd-soc-null" or something similar. And remove hwparams assignment
to make it really do nothing.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Topology needs device for prints and resource allocation. So far,
component->dev is used. However, this may lead to high memory use in
model where card is an independent driver which can be reloaded and
topology is loaded from component's probe() method. Every time machine
driver is reloaded topology is being loaded anew, each time allocating
new memory. Said memory will only be freed when component itself is
being freed.
Address the problem by tying topology to component->card->dev instead,
so memory occupied by the topology is freed whenever related machine
device gets removed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_tplg_add_dcontrol() passes device as argument which is later used to
print messages. Align it with all other prints in file to use tplg->dev.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sanity checks to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sanity check to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If snd_soc_component_set_jack() is called after
snd_soc_component_remove() it may operate on memory which is freed in
->remove handler.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
INFO: task iou-wrk-6609:6612 blocked for more than 143 seconds.
Not tainted 5.15.0-rc5-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:iou-wrk-6609 state:D stack:27944 pid: 6612 ppid: 6526 flags:0x00004006
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xb44/0x5960 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_timeout+0x1db/0x2a0 kernel/time/timer.c:1857
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x176/0x280 kernel/sched/completion.c:138
io_worker_exit fs/io-wq.c:183 [inline]
io_wqe_worker+0x66d/0xc40 fs/io-wq.c:597
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
io-wq worker may submit a task_work to the master task and upon
io_worker_exit() wait for the tw to get executed. The problem appears
when the master task is waiting in coredump.c:
468 freezer_do_not_count();
469 wait_for_completion(&core_state->startup);
470 freezer_count();
Apparently having some dependency on children threads getting everything
stuck. Workaround it by cancelling the taks_work callback that causes it
before going into io_worker_exit() waiting.
p.s. probably a better option is to not submit tw elevating the refcount
in the first place, but let's leave this excercise for the future.
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+27d62ee6f256b186883e@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/142a716f4ed936feae868959059154362bfa8c19.1635509451.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ring iteration is racy, which isn't necessarily a problem except it
can cause us to iterate the whole thing. That isn't desired or ideal,
and it can lead to excessive runtimes of reading fdinfo.
Cap the iteration at tail - head OR the ring size. While in there, clean
up the ring masking and just dump the raw values along with the masks.
That provides more useful debug info.
Fixes: 83f84356bc ("io_uring: add more uring info to fdinfo for debug")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure to use pclose() to properly close the pipe opened by popen().
Fixes: 81f77fd0de ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211026143409.42666-1-andrea.righi@canonical.com
TFA9897 has an internal 'rcv' switch so that it can manage both
loudspeaker and earpiece modes with the same physical speaker.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211024085840.1536438-3-vincent.knecht@mailoo.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are the USB-serial updates for 5.16-rc1, including:
- conversions of usb_control_msg() calls to use the new wrappers where
appropriate
- fix of the keyspan probe error handling after a low-order allocation
failure (e.g. due to fault injection)
- allow hung up ports to be runtime suspended
Included are also some related clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYXuuDwAKCRALxc3C7H1l
CNStAP4ubIEo6iYNF1N9FvkyvIDIlsSF8GOzXpT433cY0jQjxgD+LhzgIbtDi6SI
6Rt91qPdkf+eAsHTLDFjEygigjtinww=
=HGXC
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.16-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.16-rc1
Here are the USB-serial updates for 5.16-rc1, including:
- conversions of usb_control_msg() calls to use the new wrappers where
appropriate
- fix of the keyspan probe error handling after a low-order allocation
failure (e.g. due to fault injection)
- allow hung up ports to be runtime suspended
Included are also some related clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.16-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: serial: kl5kusb105: drop line-status helper
USB: serial: kl5kusb105: simplify line-status handling
USB: serial: kl5kusb105: clean up line-status handling
USB: serial: kl5kusb105: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: keyspan_pda: use usb_control_msg_recv()
USB: serial: ftdi_sio: use usb_control_msg_recv()
USB: serial: f81232: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: allow hung up ports to be suspended
USB: serial: clean up core error labels
The upper limit of MAX_LP_MSG_LEN on HIP08 is 64K, and the upper limit on
HIP09 is 16K. Regardless of whether it is HIP08 or HIP09, only 16K will be
used. In order to ensure compatibility, it is unified to 16K.
Setting MAX_LP_MSG_LEN to 16K will not cause performance loss on HIP08.
Fixes: fbed9d2be2 ("RDMA/hns: Fix configuration of ack_req_freq in QPC")
Link: https://lore.kernel.org/r/20211029100537.27299-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We set the init CQ status to ARMED before. As a result, an unexpected CEQE
would be reported. Therefore, the init CQ status should be set to no_armed
rather than REG_NXT_CEQE.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/20211029095846.26732-1-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The acp-platform driver now needs the ACPI helpers:
ld.lld: error: undefined symbol: snd_soc_acpi_find_machine
>>> referenced by acp-platform.c
>>> soc/amd/acp/acp-platform.o:(acp_machine_select) in archive sound/built-in.a
ld.lld: error: undefined symbol: snd_soc_acpi_codec_list
>>> referenced by acp-renoir.c
>>> soc/amd/acp/acp-renoir.o:(snd_soc_acpi_amd_acp_machines) in archive sound/built-in.a
Other drivers using this interface, select SND_SOC_ACPI, so do the
same thing here.
Fixes: e646b51f5d ("ASoC: amd: acp: Add callback for machine driver on ACP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211029113714.966823-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the following commits from upstream:
0a3a9d3449c8 checks: Add an interrupt-map check
8fd24744e361 checks: Ensure '#interrupt-cells' only exists in interrupt providers
d8d1a9a77863 checks: Drop interrupt provider '#address-cells' check
52a16fd72824 checks: Make interrupt_provider check dependent on interrupts_extended_is_cell
37fd700685da treesource: Maintain phandle label/path on output
e33ce1d6a8c7 flattree: Use '\n', not ';' to separate asm pseudo-ops
d24cc189dca6 asm: Use assembler macros instead of cpp macros
ff3a30c115ad asm: Use .asciz and .ascii instead of .string
5eb5927d81ee fdtdump: fix -Werror=int-to-pointer-cast
0869f8269161 libfdt: Add ALIGNMENT error string
69595a167f06 checks: Fix bus-range check
72d09e2682a4 Makefile: add -Wsign-compare to warning options
b587787ef388 checks: Fix signedness comparisons warnings
69bed6c2418f dtc: Wrap phandle validity check
910221185560 fdtget: Fix signedness comparisons warnings
d966f08fcd21 tests: Fix signedness comparisons warnings
ecfb438c07fa dtc: Fix signedness comparisons warnings: pointer diff
5bec74a6d135 dtc: Fix signedness comparisons warnings: reservednum
24e7f511fd4a fdtdump: Fix signedness comparisons warnings
b6910bec1161 Bump version to v1.6.1
21d61d18f968 Fix CID 1461557
4c2ef8f4d14c checks: Introduce is_multiple_of()
e59ca36fb70e Make handling of cpp line information more tolerant
0c3fd9b6aceb checks: Drop interrupt_cells_is_cell check
6b3081abc4ac checks: Add check_is_cell() for all phandle+arg properties
2dffc192a77f yamltree: Remove marker ordering dependency
61e513439e40 pylibfdt: Rework "avoid unused variable warning" lines
c8bddd106095 tests: add a positive gpio test case
ad4abfadb687 checks: replace strstr and strrchr with strends
09c6a6e88718 dtc.h: add strends for suffix matching
9bb9b8d0b4a0 checks: tigthen up nr-gpios prop exception
b07b62ee3342 libfdt: Add FDT alignment check to fdt_check_header()
a2def5479950 libfdt: Check that the root-node name is empty
4ca61f84dc21 libfdt: Check that there is only one root node
34d708249a91 dtc: Remove -O dtbo support
8e7ff260f755 libfdt: Fix a possible "unchecked return value" warning
88875268c05c checks: Warn on node-name and property name being the same
9d2279e7e6ee checks: Change node-name check to match devicetree spec
f527c867a8c6 util: limit gnu_printf format attribute to gcc >= 4.4.0
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Some functions had kernel-doc that used a comma instead of a hash to
separate the function name from the one line description.
Also, the "ftrace_is_dead()" had an incomplete description.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Summary: The driver applied the opposite of the DT setting to the
wrong register bit.
The jack plug detect hardware in cs42l42 is somewhat confusing,
compounded by an unclear description in the datasheet. This is most
likely the reason that the driver implemented a DT property for the
wrong register bit, that had the opposite effect of what was
described in the binding.
Changing the meaning of the property values isn't feasible; the
driver dates from 2016 and the risk of breaking out-of-tree configs
is too high (the property is also available to ACPI systems).
So the fix is to make the binding doc match the actual behaviour and
then fix the driver to apply it to the correct register bit.
As a bonus, patch #3 converts the binding to yaml.
Richard Fitzgerald (3):
ASoC: dt-bindings: cs42l42: Correct description of ts-inv
ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
ASoC: dt-bindings: cs42l42: Convert binding to yaml
.../devicetree/bindings/sound/cirrus,cs42l42.yaml | 225 +++++++++++++++++++++
.../devicetree/bindings/sound/cs42l42.txt | 114 -----------
MAINTAINERS | 1 +
sound/soc/codecs/cs42l42.c | 9 +-
4 files changed, 230 insertions(+), 119 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/cs42l42.txt
--
2.11.0
Below two compatibles can be used for exynosautov9 SoC UFS controller.
- samsung,exynosautov9-ufs: ExynosAutov9 UFS Physical Host
- samsung,exynosautov9-ufs-vh: ExynosAutov9 UFS Virtual Host
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211018124216.153072-16-chanho61.park@samsung.com
Add "samsung,sysreg" regmap and the offset to the ufs shareability
register for setting io coherency of the samsung ufs. "dma-coherent"
property is also required because the driver code needs to know.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211018124216.153072-13-chanho61.park@samsung.com
Fix wrong test data at testmgr.h, it seems to be caused
by ignoring the last '\0' when calling sizeof.
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These three events can race when pcrypt is used multiple times in a
template ("pcrypt(pcrypt(...))"):
1. [taskA] The caller makes the crypto request via crypto_aead_encrypt()
2. [kworkerB] padata serializes the inner pcrypt request
3. [kworkerC] padata serializes the outer pcrypt request
3 might finish before the call to crypto_aead_encrypt() returns in 1,
resulting in two possible issues.
First, a use-after-free of the crypto request's memory when, for
example, taskA writes to the outer pcrypt request's padata->info in
pcrypt_aead_enc() after kworkerC completes the request.
Second, the outer pcrypt request overwrites the inner pcrypt request's
return code with -EINPROGRESS, making a successful request appear to
fail. For instance, kworkerB writes the outer pcrypt request's
padata->info in pcrypt_aead_done() and then taskA overwrites it
in pcrypt_aead_enc().
Avoid both situations by delaying the write of padata->info until after
the inner crypto request's return code is checked. This prevents the
use-after-free by not touching the crypto request's memory after the
next-inner crypto request is made, and stops padata->info from being
overwritten.
Fixes: 5068c7a883 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Repalce kthread_create/wake_up_process() with kthread_run()
to simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the defined variable "dev" to make the code cleaner.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function s5p_aes_probe() does not perform sufficient error
checking after executing platform_get_resource(), thus fix it.
Fixes: c2afad6c61 ("crypto: s5p-sss - Add HASH support for Exynos")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Intel Keem Bay SoC can provide hardware acceleration of Elliptic
Curve Cryptography (ECC) by means of its Offload and Crypto Subsystem
(OCS).
Add the Keem Bay OCS ECC driver which leverages such hardware
capabilities to provide hardware-acceleration of ECDH-256 and ECDH-384.
Signed-off-by: Prabhjot Khurana <prabhjot.khurana@intel.com>
Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the following additional ECC helper functions:
- ecc_alloc_point()
- ecc_free_point()
- vli_num_bits()
- ecc_point_is_zero()
This is done to allow future ECC device drivers to re-use existing code,
thus simplifying their implementation.
Functions are exported using EXPORT_SYMBOL() (instead of
EXPORT_SYMBOL_GPL()) to be consistent with the functions already
exported by crypto/ecc.c.
Exported functions are documented in include/crypto/internal/ecc.h.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move ecc.h header file to 'include/crypto/internal' so that it can be
easily imported from everywhere in the kernel tree.
This change is done to allow crypto device drivers to re-use the symbols
exported by 'crypto/ecc.c', thus avoiding code duplication.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add KPP support to the crypto engine queue manager, so that it can be
used to simplify the logic of KPP device drivers as done for other
crypto drivers.
Signed-off-by: Prabhjot Khurana <prabhjot.khurana@intel.com>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The delayed boot-time testing patch created a dependency loop
between api.c and algapi.c because it added a crypto_alg_tested
call to the former when the crypto manager is disabled.
We could instead avoid creating the test larvals if the crypto
manager is disabled. This avoids the dependency loop as well
as saving some unnecessary work, albeit in a very unlikely case.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: adad556efc ("crypto: api - Fix built-in testing dependency failures")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a packet of a new flow arrives in openvswitch kernel module, it dissects
the packet and passes the extracted flow key to ovs-vswtichd daemon. If hw-
offload configuration is enabled, the daemon creates a new TC flower entry to
bypass openvswitch kernel module for the flow (TC flower can also offload flows
to NICs but this time that does not matter).
In this processing flow, I found the following issue in cases of GRE/IPIP
packets.
When ovs_flow_key_extract() in openvswitch module parses a packet of a new
GRE (or IPIP) flow received on non-tunneling vports, it extracts information
of the outer IP header for ip_proto/src_ip/dst_ip match keys.
This means ovs-vswitchd creates a TC flower entry with IP protocol/addresses
match keys whose values are those of the outer IP header. OTOH, TC flower,
which uses flow_dissector (different parser from openvswitch module), extracts
information of the inner IP header.
The following flow is an example to describe the issue in more detail.
<----------- Outer IP -----------------> <---------- Inner IP ---------->
+----------+--------------+--------------+----------+----------+----------+
| ip_proto | src_ip | dst_ip | ip_proto | src_ip | dst_ip |
| 47 (GRE) | 192.168.10.1 | 192.168.10.2 | 6 (TCP) | 10.0.0.1 | 10.0.0.2 |
+----------+--------------+--------------+----------+----------+----------+
In this case, TC flower entry and extracted information are shown as below:
- ovs-vswitchd creates TC flower entry with:
- ip_proto: 47
- src_ip: 192.168.10.1
- dst_ip: 192.168.10.2
- TC flower extracts below for IP header matches:
- ip_proto: 6
- src_ip: 10.0.0.1
- dst_ip: 10.0.0.2
Thus, GRE or IPIP packets never match the TC flower entry, as each
dissector behaves differently.
IMHO, the behavior of TC flower (flow dissector) does not look correct,
as ip_proto/src_ip/dst_ip in TC flower match means the outermost IP
header information except for GRE/IPIP cases. This patch adds a new
flow_dissector flag FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP which skips
dissection of the encapsulated inner GRE/IPIP header in TC flower
classifier.
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver no longer depends on this option, but it fails to
build if it's disabled because the skb->tc_skip_classify is
hidden behind an #ifdef:
drivers/net/ifb.c:81:8: error: no member named 'tc_skip_classify' in 'struct sk_buff'
skb->tc_skip_classify = 1;
Use the same #ifdef around the assignment.
Fixes: 046178e726 ("ifb: Depend on netfilter alternatively to tc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I fixed IGMPv3/MLDv2 to use the bridge's multicast_membership_interval
value which is chosen by user-space instead of calculating it based on
multicast_query_interval and multicast_query_response_interval I forgot
to update the selftests relying on that behaviour. Now we have to
manually set the expected GMI value to perform the tests correctly and get
proper results (similar to IGMPv2 behaviour).
Fixes: fac3cb82a5 ("net: bridge: mcast: use multicast_membership_interval for IGMPv3")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0a593fbbc2 ("null_blk: poll queue support") introduced the poll
queue feature to null_blk. After this change, null_blk device has both
submit queues and poll queues, and null_map_queues() callback maps the
both queues for corresponding hardware contexts. The commit also added
the device configuration attribute 'poll_queues' in same manner as the
existing attribute 'submit_queues'. These attributes allow to modify the
numbers of queues. However, when the new values are stored to these
attributes, the values are just handled only for the corresponding
queue. When number of submit_queue is updated, number of poll_queue is
not counted, or vice versa. This caused inconsistent number of queues
and queue mapping and resulted in null-ptr-dereference. This failure was
observed in blktests block/029 and block/030.
To avoid the inconsistency, fix the attribute updates to care both
submit_queues and poll_queues. Introduce the helper function
nullb_update_nr_hw_queues() to handle stores to the both two attributes.
Add poll_queues field to the struct nullb_device to track the number in
same manner as submit_queues. Add two more fields prev_submit_queues and
prev_poll_queues to keep the previous values before change. In case the
block layer failed to update the nr_hw_queues, refer the previous values
in null_map_queues() to map queues in same manner as before change.
Also add poll_queues value checks in nullb_update_nr_hw_queues() and
null_validate_conf(). They ensure the poll_queues value of each device
is within the range from 1 to module parameter value of poll_queues.
Fixes: 0a593fbbc2 ("null_blk: poll queue support")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20211029103926.845635-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
