This patch adjusts the string spaces of some parameters of tx bd info in
debugfs according to their maximum needs.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The specified buffer length for three debugfs files fd_tcam, uc and tqp
is not enough for their maximum needs, so this patch fixes them.
Fixes: b5a0b70d77 ("net: hns3: refactor dump fd tcam of debugfs")
Fixes: 1556ea9120 ("net: hns3: refactor dump mac list of debugfs")
Fixes: d96b0e5946 ("net: hns3: refactor dump reg of debugfs")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the width of packets number registers is 32 bits, they needs at most
10 characters for decimal data printing, but now the string spaces is not
enough, so this patch fixes it.
Fixes: e44c495d95 ("net: hns3: refactor queue info of debugfs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The member data in struct hclge_desc is type of __le32, it needs endian
conversion before using it, and some functions of debugfs didn't do that,
so this patch fixes it.
Fixes: c0ebebb9cc ("net: hns3: Add "dcb register" status information query function")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the workqueue of hclge/hclgevf is executed on
the CPU that initiates scheduling requests by default. In
stress scenarios, the CPU may be busy and workqueue scheduling
is completed after a long period of time. To avoid this
situation and implement proper scheduling, use the WQ_UNBOUND
mode instead. In this way, the workqueue can be performed on
a relatively idle CPU.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a TP port is configured by follow steps:
1.ethtool -s ethx autoneg off speed 100 duplex full
2.ethtool -A ethx rx on tx on
3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off)
4.ethtool -s ethx autoneg off speed 100 duplex full
In step 3, driver will set rx&tx pause parameters of hardware to off as
pause parameters negotiated with link partner are off.
After step 4, the "ethtool -a ethx" command shows both rx and tx pause
parameters are on. However, pause parameters of hardware are still off
and port has no flow control function actually.
To fix this problem, if autoneg is disabled, driver uses its saved
parameters to restore pause of hardware. If the speed is not changed in
this case, there is no link state changed for phy, it will cause the pause
parameter is not taken effect, so we need to force phy to go down and up.
Fixes: aacbe27e82 ("net: hns3: modify how pause options is displayed")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now mcu_gpiochip_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211021105657.72572-1-u.kleine-koenig@pengutronix.de
Building tqm8541_defconfig results in:
arch/powerpc/mm/nohash/fsl_book3e.c: In function 'settlbcam':
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: error: '_PAGE_BAP_SX' undeclared (first use in this function)
126 | TLBCAM[index].MAS3 |= (flags & _PAGE_BAP_SX) ? MAS3_SX : 0;
| ^~~~~~~~~~~~
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [scripts/Makefile.build:277: arch/powerpc/mm/nohash/fsl_book3e.o] Error 1
make[2]: *** [scripts/Makefile.build:540: arch/powerpc/mm/nohash] Error 2
make[1]: *** [scripts/Makefile.build:540: arch/powerpc/mm] Error 2
make: *** [Makefile:1868: arch/powerpc] Error 2
This is because _PAGE_BAP_SX is not defined when using 32 bits PTE.
Now that _PAGE_EXEC contains both _PAGE_BAP_SX and _PAGE_BAP_UX, it can be used instead.
Fixes: 01116e6e98 ("powerpc/fsl_booke: Take exec flag into account when setting TLBCAMs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91a0235e7f2a85308b84aa5b9efd8d022e2b899a.1635226743.git.christophe.leroy@csgroup.eu
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c41100f9c144dc5b62e5a751b810190c6b5d42fd.1635226743.git.christophe.leroy@csgroup.eu
Commit 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
changed those two functions to use pte helpers to determine which
bits to clear and which bits to set.
This change was based on the assumption that bits to be set/cleared
are always the same and can be determined by applying the pte
manipulation helpers on __pte(0).
But on platforms like book3e, the bits depend on whether the page
is a user page or not.
For the time being it more or less works because of _PAGE_EXEC being
used for user pages only and exec right being set at all time on
kernel page. But following patch will clean that and output of
pte_mkexec() will depend on the page being a user or kernel page.
Instead of trying to make an even more complicated helper where bits
would become dependent on the final pte value, come back to a more
static situation like before commit 26973fa5ac ("powerpc/mm: use
pte helpers in generic code"), by introducing an 8xx specific
version of __ptep_set_access_flags() and ptep_set_wrprotect().
Fixes: 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/922bdab3a220781bae2360ff3dd5adb7fe4d34f1.1635226743.git.christophe.leroy@csgroup.eu
HW-GRO support in mlx5
Beside the HW GRO this series includes two trivial non-mlx5 patches:
- net: Prevent HW-GRO and LRO features operate together
- lib: bitmap: Introduce node-aware alloc API
Khalid Manaa Says:
==================
This series implements the HW-GRO offload using the HW feature SHAMPO.
HW-GRO: Hardware offload for the Generic Receive Offload feature.
SHAMPO: Split Headers And Merge Payload Offload.
This feature performs headers data split for each received packed and
merge the payloads of the packets of the same session.
There are new HW components for this feature:
The headers buffer:
– cyclic buffer where the packets headers will be located
Reservation buffer:
– capability to divide RQ WQEs to reservations, a definite size in
granularity of 4KB, the reservation is used to define the largest segment
that we can create by packets stitching.
Each reservation will have a session and the new received packet can be merged
to the session, terminate it, or open a new one according to the match criteria.
When a new packet is received the headers will be written to the headers buffer
and the data will be written to the reservation, in case the packet matches
the session the data will be written continuously otherwise it will be written
after performing an alignment.
SHAMPO RQ, WQ and CQE changes:
-----------------------------
RQ (receive queue) new params:
-shampo_no_match_alignment_granularity: the HW alignment granularity in case
the received packet doesn't match the current session.
-shampo_match_criteria_type: the type of match criteria.
-reservation_timeout: the maximum time that the HW will hold the reservation.
-Each RQ has SKB that represents the current opened flow.
WQ (work queue) new params:
-headers_mkey: mkey that represents the headers buffer, where the packets
headers will be written by the HW.
-shampo_enable: flag to verify if the WQ supports SHAMPO feature.
-log_reservation_size: the log of the reservation size where the data of
the packet will be written by the HW.
-log_max_num_of_packets_per_reservation: log of the maximum number of packets
that can be written to the same reservation.
-log_headers_entry_size: log of the header entry size of the headers buffer.
-log_headers_buffer_entry_num: log of the entries number of the headers buffer.
CQEs (Completion queue entry) SHAMPO fields:
-match: in case it is set, then the current packet matches the opened session.
-flush: in case it is set, the opened session must be flushed.
-header_size: the size of the packet’s headers.
-header_entry_index: the entry index in the headers buffer of the received
packet headers.
-data_offset: the offset of the received packet data in the WQE.
HW-GRO works as follow:
----------------------
The feature can be enabled on the interface using the ethtool command by
setting on rx-gro-hw. When the feature is on the mlx5 driver will reopen
the RQ to support the SHAMPO feature:
Will allocate the headers buffer and fill the parameters regarding the
reservation and the match criteria.
Receive packet flow:
each RQ will hold SKB that represents the current GRO opened session.
The driver has a new CQE handler mlx5e_handle_rx_cqe_mpwrq_shampo which will
use the CQE SHAMPO params to extract the location of the packet’s headers
in the headers buffer and the location of the packets data in the RQ.
Also, the CQE has two flags flush and match that indicate if the current
packet matches the current session or not and if we need to close the session.
In case there is an opened session, and we receive a matched packet then the
handler will merge the packet's payload to the current SKB, in case we receive
no match then the handler will flush the SKB and create a new one for the new packet.
In case the flash flag is set then the driver will close the session, the SKB
will be passed to the network stack.
In case the driver merges packets in the SKB, before passing the SKB to the network
stack the driver will update the checksum of the packet’s headers.
SKB build:
---------
The driver will build a new SKB in the following situations:
in case there is no current opened session.
In case the current packet doesn’t match the current session.
In case there is no place to add the packets data to the SKB that represents the
current session.
Otherwise, the driver will add the packet’s data to the SKB.
When the driver builds a new SKB, the linear area will contain only the packet headers
and the data will be added to the SKB fragments.
In case the entry size of the headers buffer is sufficient to build the SKB
it will be used, otherwise the driver will allocate new memory to build the SKB.
==================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmF4udIACgkQSD+KveBX
+j7XBgf+OOLEJrYrbQpffdZQksn37oT98XrsGAoPbcxhaqioH+yErcVPdVyK8lEK
sERyRkjAn4+2svp15aM7VM/JSN/JbikVWY9DQ5joCVmeJ9wIKttAACybM+VmT8tw
0RBW+XfXyAmGzlV260/MuO4tzCfyrXuCEw0jDyBgxKyFX2aIvzll64ehryv4tbFq
tc6P60FuM9E9YTvtXY4KHYx1taIzpOOQ6FjEx4UgvcLiARmuWTYR+Gs872A/NUKb
9KEyz+wSnX2QzpHXXVr6EP9kVzAUqlBYRYtNc55cWpcOn8zqep4T/AFr3BtB02mJ
NylP3+EktqBV8ISNRr5QtoY95GLWcQ==
=v8rX
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-10-26
HW-GRO support in mlx5
Beside the HW GRO this series includes two trivial non-mlx5 patches:
- net: Prevent HW-GRO and LRO features operate together
- lib: bitmap: Introduce node-aware alloc API
Khalid Manaa Says:
==================
This series implements the HW-GRO offload using the HW feature SHAMPO.
HW-GRO: Hardware offload for the Generic Receive Offload feature.
SHAMPO: Split Headers And Merge Payload Offload.
This feature performs headers data split for each received packed and
merge the payloads of the packets of the same session.
There are new HW components for this feature:
The headers buffer:
– cyclic buffer where the packets headers will be located
Reservation buffer:
– capability to divide RQ WQEs to reservations, a definite size in
granularity of 4KB, the reservation is used to define the largest segment
that we can create by packets stitching.
Each reservation will have a session and the new received packet can be merged
to the session, terminate it, or open a new one according to the match criteria.
When a new packet is received the headers will be written to the headers buffer
and the data will be written to the reservation, in case the packet matches
the session the data will be written continuously otherwise it will be written
after performing an alignment.
SHAMPO RQ, WQ and CQE changes:
-----------------------------
RQ (receive queue) new params:
-shampo_no_match_alignment_granularity: the HW alignment granularity in case
the received packet doesn't match the current session.
-shampo_match_criteria_type: the type of match criteria.
-reservation_timeout: the maximum time that the HW will hold the reservation.
-Each RQ has SKB that represents the current opened flow.
WQ (work queue) new params:
-headers_mkey: mkey that represents the headers buffer, where the packets
headers will be written by the HW.
-shampo_enable: flag to verify if the WQ supports SHAMPO feature.
-log_reservation_size: the log of the reservation size where the data of
the packet will be written by the HW.
-log_max_num_of_packets_per_reservation: log of the maximum number of packets
that can be written to the same reservation.
-log_headers_entry_size: log of the header entry size of the headers buffer.
-log_headers_buffer_entry_num: log of the entries number of the headers buffer.
CQEs (Completion queue entry) SHAMPO fields:
-match: in case it is set, then the current packet matches the opened session.
-flush: in case it is set, the opened session must be flushed.
-header_size: the size of the packet’s headers.
-header_entry_index: the entry index in the headers buffer of the received
packet headers.
-data_offset: the offset of the received packet data in the WQE.
HW-GRO works as follow:
----------------------
The feature can be enabled on the interface using the ethtool command by
setting on rx-gro-hw. When the feature is on the mlx5 driver will reopen
the RQ to support the SHAMPO feature:
Will allocate the headers buffer and fill the parameters regarding the
reservation and the match criteria.
Receive packet flow:
each RQ will hold SKB that represents the current GRO opened session.
The driver has a new CQE handler mlx5e_handle_rx_cqe_mpwrq_shampo which will
use the CQE SHAMPO params to extract the location of the packet’s headers
in the headers buffer and the location of the packets data in the RQ.
Also, the CQE has two flags flush and match that indicate if the current
packet matches the current session or not and if we need to close the session.
In case there is an opened session, and we receive a matched packet then the
handler will merge the packet's payload to the current SKB, in case we receive
no match then the handler will flush the SKB and create a new one for the new packet.
In case the flash flag is set then the driver will close the session, the SKB
will be passed to the network stack.
In case the driver merges packets in the SKB, before passing the SKB to the network
stack the driver will update the checksum of the packet’s headers.
SKB build:
---------
The driver will build a new SKB in the following situations:
in case there is no current opened session.
In case the current packet doesn’t match the current session.
In case there is no place to add the packets data to the SKB that represents the
current session.
Otherwise, the driver will add the packet’s data to the SKB.
When the driver builds a new SKB, the linear area will contain only the packet headers
and the data will be added to the SKB fragments.
In case the entry size of the headers buffer is sufficient to build the SKB
it will be used, otherwise the driver will allocate new memory to build the SKB.
==================
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This includes entries for new drivers/bindings that have been already
merged into subsystem trees (sans these updates). It is also based on
the 5.15 fixes pull with general maintainer updates.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYXlFEwAKCRClhN6SrnTN
2MISAQDeUXf9O9c+tIk309bCOxt6SINEAim7zPTYzuMrPz6NlQD/ZhXXFlRuwsWz
5LeNOEMyZN5lvSaNcmavx/WK4M6B7A4=
=+AuH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SXNN
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-maintainers-5.16-v2' of https://github.com/AsahiLinux/linux into arm/soc
Apple SoC MAINTAINERS updates 5.16.
This includes entries for new drivers/bindings that have been already
merged into subsystem trees (sans these updates). It is also based on
the 5.15 fixes pull with general maintainer updates.
* tag 'asahi-soc-maintainers-5.16-v2' of https://github.com/AsahiLinux/linux:
MAINTAINERS: add pinctrl-apple-gpio to ARM/APPLE MACHINE
MAINTAINERS: Add pasemi i2c to ARM/APPLE MACHINE
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
Link: https://lore.kernel.org/r/f62bfa4a-3cc8-c568-be78-c5fd6919bc74@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are couple of improvements to static asserts against
the format specifier flags:
- new static assert for SIGN
- fix static assert for SMALL
SMALL is not equal to ASCII code of white space, it equals to
the bit difference between capital and small letters (however
the value is the same, semantically expression means different
things).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211026140356.45610-1-andriy.shevchenko@linux.intel.com
Running program with bpf-to-bpf function calls results in data access
exception (0x300) with the below call trace:
bpf_int_jit_compile+0x238/0x750 (unreliable)
bpf_check+0x2008/0x2710
bpf_prog_load+0xb00/0x13a0
__sys_bpf+0x6f4/0x27c0
sys_bpf+0x2c/0x40
system_call_exception+0x164/0x330
system_call_vectored_common+0xe8/0x278
as bpf_int_jit_compile() tries writing to write protected JIT code
location during the extra pass.
Fix it by holding off write protection of JIT code until the extra
pass, where branch target addresses fixup happens.
Fixes: 62e3d4210a ("powerpc/bpf: Write protect JIT code")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211025055649.114728-1-hbathini@linux.ibm.com
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") modified
the method to check partition existence in host-aware zoned block
devices from disk_has_partitions() helper function call to empty check
of xarray disk->part_tbl. However, disk->part_tbl always has single
entry for disk->part0 and never becomes empty. This resulted in the
host-aware zoned devices always judged to have partitions, and it made
the sysfs queue/zoned attribute to be "none" instead of "host-aware"
regardless of partition existence in the devices.
This also caused DEBUG_LOCKS_WARN_ON(lock->magic != lock) for
sdkp->rev_mutex in scsi layer when the kernel detects host-aware zoned
device. Since block layer handled the host-aware zoned devices as non-
zoned devices, scsi layer did not have chance to initialize the mutex
for zone revalidation. Therefore, the warning was triggered.
To fix the issues, call the helper function disk_has_partitions() in
place of disk->part_tbl empty check. Since the function was removed with
the commit a33df75c63, reimplement it to walk through entries in the
xarray disk->part_tbl.
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.14+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211026060115.753746-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new wrapper functions for usb_control_msg() can accept data from
stack and treat short reads as errors. Hence use the wrappers functions.
Please note that because of this change, cp210x_read_reg_block() will no
longer log the length of short reads.
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20211001065720.21330-3-himadrispandya@gmail.com
[ johan: style changes ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Nobody cares about iov iterators state if we return -EIOCBQUEUED, so as
the we now have __blkdev_direct_IO_async(), which gets pages only once,
we can skip expensive iov_iter_advance(). It's around 1-2% of all CPU
spent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6158edfbfa2ae3bc24aed29a72f035df18fad2f.1635337135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
usb_control_msg_recv() is a new wrapper function for usb_control_msg()
that has error checks for short reads. This function also accepts data
buffer on stack. Hence use this function to simplify error handling for
short reads. Short reads will now get reported as -EREMOTEIO with no
indication of how short the transfer was.
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Link: https://lore.kernel.org/r/20211001065720.21330-2-himadrispandya@gmail.com
[ johan: fix quirk-detection breakage, style changes ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Add the Apple SoC pinctrl driver to the ARM/APPLE MACHINE entry
in MAINTAINERS.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add the pasemi i2c platform and core files to the ARM/APPLE MACHINE
entry in MAINTAINERS.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
At the moment, all the Minis running Linux have the same MAC
address (00:10:18:00:00:00), which is a bit annoying.
Expose the PCI node corresponding to the Ethernet device, and
declare a 'local-mac-address' property. The bootloader will update
it (m1n1 already has the required feature). And if it doesn't, then
the default value is already present in the DT.
This relies on forcing the bus number for each port so that the
endpoints connected to them are correctly numbered (and keeps dtc
quiet).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add the interrupt-map properties that are required for INTx
signalling.
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka
DARTs). Add the three instances that deal with the internal PCIe
ports and route each port's traffic through its DART.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add node corresponding to the apcie,t8103 node in the
Apple device tree for the Mac mini (M1, 2020).
Power domain references and DART (IOMMU) references are left out
at the moment and will be added once the appropriate bindings have
been settled upon.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921183420.436-5-kettenis@openbsd.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Add pinctrl nodes corresponding to the gpio,t8101 nodes in the
Apple device tree for the Mac mini (M1, 2020).
Clock references are left out at the moment and will be added once
the appropriate bindings have been settled upon.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210520171310.772-3-mark.kettenis@xs4all.nl
Signed-off-by: Hector Martin <marcan@marcan.st>
All existing users of %pGp want the hex value as well as the decoded
flag names. This looks awkward (passing the same parameter to printf
twice), so move that functionality into the core. If we want, we
can make that optional with flag arguments to %pGp in the future.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211019142621.2810043-6-willy@infradead.org
Instead of having an ifdef to decide whether to print a |, use the
'append' functionality of the main loop to print it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211019142621.2810043-4-willy@infradead.org
Keep flags intact so that we also test what happens when unknown flags
are passed to %pGp.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211019142621.2810043-3-willy@infradead.org
Instead of assigning ptf[i].value, leave the values in the on-stack
array and then we can make the array const.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211019142621.2810043-2-willy@infradead.org
The EPOCHSECONDS environment variable was added in bash 5.0 (released
2019). Some distributions of the "stable" and "long-term" variety ship
older versions of bash than this, so swap to using the date command
instead.
"%s" was added to coreutils `date` in 1993 so we should be good, but who
knows, it is a GNU extension and not part of the POSIX spec for `date`.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211025102436.19177-1-ruscur@russell.cc
The check_return_regs_valid() can cause a false positive if the return
regs are marked as norestart and they are an HSRR type interrupt,
because the low bit in the bottom of regs->trap causes interrupt type
matching to fail.
This can occcur for example on bare metal with a HV privileged doorbell
interrupt that causes a signal, but do_signal returns early because
get_signal() fails, and takes the "No signal to deliver" path. In this
case no signal was delivered so the return location is not changed so
return SRRs are not invalidated, yet set_trap_norestart is called, which
messes up the match. Building go-1.16.6 is known to reproduce this.
Fix it by using the TRAP() accessor which masks out the low bit.
Fixes: 6eaaf9de35 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211026122531.3599918-1-npiggin@gmail.com
While trying to build a simple Image for ACADIA platform, I got the
following error:
WRAP arch/powerpc/boot/simpleImage.acadia
INFO: Uncompressed kernel (size 0x6ae7d0) overlaps the address of the wrapper(0x400000)
INFO: Fixing the link_address of wrapper to (0x700000)
powerpc64-linux-gnu-ld : mode d'émulation non reconnu : -T
Émulations prises en charge : elf64ppc elf32ppc elf32ppclinux elf32ppcsim elf64lppc elf32lppc elf32lppclinux elf32lppcsim
make[1]: *** [arch/powerpc/boot/Makefile:424 : arch/powerpc/boot/simpleImage.acadia] Erreur 1
make: *** [arch/powerpc/Makefile:285 : simpleImage.acadia] Erreur 2
Trying again with V=1 shows the following command
powerpc64-linux-gnu-ld -m -T arch/powerpc/boot/zImage.lds -Ttext 0x700000 --no-dynamic-linker -o arch/powerpc/boot/simpleImage.acadia -Map wrapper.map arch/powerpc/boot/fixed-head.o arch/powerpc/boot/simpleboot.o ./zImage.3278022.o arch/powerpc/boot/wrapper.a
The argument of '-m' is missing.
This is due to the wrapper script calling 'objdump -p vmlinux' and
looking for 'file format', whereas the output of objdump is:
vmlinux: format de fichier elf32-powerpc
En-tête de programme:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Add LC_ALL=C at the beginning of the wrapper script in order to get the
output expected by the script:
vmlinux: file format elf32-powerpc
Program Header:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9ff3bc98035f63b122c051f02dc47c7aed10430.1635256089.git.christophe.leroy@csgroup.eu
For 64-bit book3s the default should be 64K as that's what modern CPUs
are designed for.
The following defconfigs already set CONFIG_PPC_64K_PAGES:
cell_defconfig
pasemi_defconfig
powernv_defconfig
ppc64_defconfig
pseries_defconfig
skiroot_defconfig
The have the option removed from the defconfig, as it is now the
default.
The defconfigs that now need to set CONFIG_PPC_4K_PAGES to maintain
their existing behaviour are:
g5_defconfig
maple_defconfig
microwatt_defconfig
ps3_defconfig
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/109
Link: https://lore.kernel.org/r/20211015001649.45591-1-joel@jms.id.au
This reverts commit 566af8cda3.
This caused some conflicts vs the audit tree, and the audit maintainers
would prefer we postpone this to the next merge window so we have more
time for testing.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Document the FAN_FS_ERROR event for user administrators and user space
developers.
Link: https://lore.kernel.org/r/20211025192746.66445-32-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Introduce an example of a FAN_FS_ERROR fanotify user to track filesystem
errors.
Link: https://lore.kernel.org/r/20211025192746.66445-31-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Send a FS_ERROR message via fsnotify to a userspace monitoring tool
whenever a ext4 error condition is triggered. This follows the existing
error conditions in ext4, so it is hooked to the ext4_error* functions.
Link: https://lore.kernel.org/r/20211025192746.66445-30-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Wire up the FAN_FS_ERROR event in the fanotify_mark syscall, allowing
user space to request the monitoring of FAN_FS_ERROR events.
These events are limited to filesystem marks, so check it is the
case in the syscall handler.
Link: https://lore.kernel.org/r/20211025192746.66445-29-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The error info is a record sent to users on FAN_FS_ERROR events
documenting the type of error. It also carries an error count,
documenting how many errors were observed since the last reporting.
Link: https://lore.kernel.org/r/20211025192746.66445-28-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Plumb the pieces to add a FID report to error records. Since all error
event memory must be pre-allocated, we pre-allocate the maximum file
handle size possible, such that it should always fit.
For errors that don't expose a file handle, report it with an invalid
FID. Internally we use zero-length FILEID_ROOT file handle for passing
the information (which we report as zero-length FILEID_INVALID file
handle to userspace) so we update the handle reporting code to deal with
this case correctly.
Link: https://lore.kernel.org/r/20211025192746.66445-27-krisman@collabora.com
Link: https://lore.kernel.org/r/20211025192746.66445-25-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
[Folded two patches into 2 to make series bisectable]
Signed-off-by: Jan Kara <jack@suse.cz>
struct fanotify_error_event, at least, is preallocated and isn't able to
to handle arbitrarily large file handles. Future-proof the code by
complaining loudly if a handle larger than MAX_HANDLE_SZ is ever found.
Link: https://lore.kernel.org/r/20211025192746.66445-26-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Now that there is an event that reports FID records even for a zeroed
file handle, wrap the logic that deides whether to issue the records
into helper functions. This shouldn't have any impact on the code, but
simplifies further patches.
Link: https://lore.kernel.org/r/20211025192746.66445-24-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
fanotify_error_event would duplicate this sequence of declarations that
already exist elsewhere with a slight different size. Create a helper
macro to avoid code duplication.
Link: https://lore.kernel.org/r/20211025192746.66445-23-krisman@collabora.com
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
