Peng Fan <peng.fan@nxp.com> says:
TJA1048 is a Dual channel can transceiver with Sleep mode supported.
TJA105{1,7} is a Single Channel can transceiver with Sleep mode supported.
Link: https://patch.msgid.link/20251001-can-v7-0-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Support TJA105{1,7} which are a single channel high-speed CAN transceiver
with silent mode supported.
phy mode is not implemented as of now. silent settings are kept in
phy_power_on and phy_power_off. After phy mode is supported, the silent
settings could be moved to phy_set_mode.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20251001-can-v7-5-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
gpiod_set_value_cansleep has an internal check on gpio_desc using
'VALIDATE_DESC(desc)', the check before invoking gpiod_set_value_cansleep
could be removed.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20251001-can-v7-4-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Introduce new flag CAN_TRANSCEIVER_DUAL_CH to indicate the phy has two
channels.
- Alloc a phy for each channel
- Support TJA1048 which is a dual high-speed CAN transceiver with sleep
mode supported.
- Add can_transceiver_phy_xlate for parsing phy
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20251001-can-v7-3-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To prepare for dual-channel phy support, introduce can_transceiver_priv as
a higher level encapsulation for phy.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20251001-can-v7-2-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The TJA1048 is a dual high-speed CAN transceiver with sleep mode supported
and no EN pin.
The TJA1051 is a high-speed CAN transceiver with slient mode supported,
but only TJA1051T/E has EN pin. To make it simple, make enable-gpios as
optional for TJA1051.
The TJA1057 is a high-speed CAN transceiver with slient mode supported
and no EN pin.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20251001-can-v7-1-fad29efc3884@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Bobby Eshleman says:
====================
selftests/vsock: refactor and improve vmtest infrastructure
This patch series refactors the vsock selftest VM infrastructure to
improve test run times, improve logging, and prepare for future tests
which make heavy usage of these refactored functions and have new
requirements such as simultaneous QEMU processes.
====================
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-0-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Disable shellcheck rules SC2317 and SC2119. These rules are being
triggered due to false positives. For SC2317, many `return
"${KSFT_PASS}"` lines are reported as unreachable, even though they are
executed during normal runs. For SC2119, the fact that
log_guest/log_host accept either stdin or arguments triggers SC2119,
despite being valid.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-12-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add vsock_loopback module loading to the loopback test so that vmtest.sh
can be used for kernels built with loopback as a module.
This is not technically a fix as kselftest expects loopback to be
built-in already (defined in selftests/vsock/config). This is useful
only for using vmtest.sh outside of kselftest.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-11-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Testing with 1.37 shows all tests passing but emits the warning:
warning: vng version 'virtme-ng 1.37' has not been tested and may not function properly.
The following versions have been tested: 1.33 1.36
This patch adds 1.37 to the virtme-ng versions to get rid of the above
warning.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-10-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the definition for BUILD and initialize it to zero. This avoids
'bash -u vmtest.sh` from throwing 'unbound variable' when BUILD is not
set to 1 and is later checked for its value.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-9-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for future patches that introduce tests that cannot
re-use the same VM, add functions to identify those that *can* re-use a
VM.
By continuing to re-use the same VM for these tests we can save time by
avoiding the delay of booting a VM for every test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-8-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add check_result() function to reuse logic for incrementing the
pass/fail counters. This function will get used by different callers as
we add different types of tests in future patches (namely, namespace and
non-namespace tests will be called at different places, and re-use this
function).
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-7-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce the time waiting for the QEMU pidfile from three minutes to five
seconds. The three minute time window was chosen to make sure QEMU had
enough time to fully boot up. This, however, is an unreasonably long
delay for QEMU to write the pidfile, which happens earlier when the QEMU
process starts (not after VM boot). The three minute delay becomes
noticeably wasteful in future tests that expect QEMU to fail and wait a
full three minutes for a pidfile that will never exist.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-6-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If QEMU fails to boot, then set the returncode (via timeout) instead of
unconditionally dying. This is in preparation for tests that expect QEMU
to fail to boot. In that case, we just want to know if the boot failed
or not so we can test the pass/fail criteria, and continue executing the
next test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-5-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change QEMU to use generated pidfile names instead of just a single
globally-defined pidfile. This allows multiple QEMU instances to
co-exist with different pidfiles. This is required for future tests that
use multiple VMs to check for CID collissions.
Additionally, this also places the burden of killing the QEMU process
and cleaning up the pidfile on the caller of vm_start(). To help with
this, a function terminate_pidfiles() is introduced that callers use to
perform the cleanup. The terminate_pidfiles() function supports multiple
pidfile removals because future patches will need to process two
pidfiles at a time.
Change QEMU_OPTS to be initialized inside the vm_start(). This allows
the generated pidfile to be passed to the string assignment, and
prepares for future vm-specific options as well (e.g., cid).
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-4-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add wrapper functions vm_vsock_test() and host_vsock_test() to invoke
the vsock_test binary. This encapsulates several items of repeat logic,
such as waiting for the server to reach listening state and
enabling/disabling the bash option pipefail to avoid pipe-style logging
from hiding failures.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-3-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite wait_for_listener()'s pattern matching to avoid tripping the
if-condition when pipefail is on.
awk doesn't gracefully handle SIGPIPE with a non-zero exit code, so grep
exiting upon finding a match causes false-positives when the pipefail
option is used (grep exits, SIGPIPE emits, and awk complains with a
non-zero exit code). Instead, move all of the pattern matching into awk
so that SIGPIPE cannot happen and the correct exit code is returned.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-2-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve usability of logging functions. Remove the test name prefix from
logging functions so that logging calls can be made deeper into the call
stack without passing down the test name or setting some global. Teach
log function to accept a LOG_PREFIX variable to avoid unnecessary
argument shifting.
Remove log_setup() and instead use log_host(). The host/guest prefixes
are useful to show whether a failure happened on the guest or host side,
but "setup" doesn't really give additional useful information. Since all
log_setup() calls happen on the host, lets just use log_host() instead.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-1-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In boards like adl_lt6911_hdmi_ssp/mtl_lt6911_hdmi_ssp/rpl_lt6911_hdmi_ssp,
HDMI is supported both for playback via normal HDA display codec,
as well as PCM capture from HDMI-In over I2S.
The common board driver function hda_dsp_hdmi_pcm_handle() has an
invalid assumption that "HDMI" is only used to identify playback HDMI
PCMs on the card. This will result in failures if HDMI-In PCMs are
defined in topology using the string "HDMI", and they are registered
before the playback PCMs.
Fix the issue by explicitly looking for FE playback PCMs.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251112115045.337062-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds the WQ_UNBOUND flag to explicitly request
alloc_workqueue() to be unbound, because this specific workload has no
benefit being per-cpu.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/r/20251112120125.124578-1-marco.crivellari@suse.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace disable_irq() with disable_irq_nosync() in msm_pinmux_set_mux()
to prevent deadlock when wakeup IRQ is triggered on the same
GPIO being reconfigured.
The issue occurs when a wakeup IRQ is triggered on a GPIO and the IRQ
handler attempts to reconfigure the same GPIO's pinmux. In this scenario,
msm_pinmux_set_mux() calls disable_irq() which waits for the currently
running IRQ handler to complete, creating a circular dependency that
results in deadlock.
Using disable_irq_nosync() avoids waiting for the IRQ handler to
complete, preventing the deadlock condition while still properly
disabling the interrupt during pinmux reconfiguration.
Suggested-by: Prasad Sodagudi <prasad.sodagudi@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
New HP Omen laptops follow the same WMI thermal profile as Victus
16-r1000 and 16-s1000.
Add DMI board 8D41 to victus_s_thermal_profile_boards.
Signed-off-by: Marcos Vega <marcosmola2@gmail.com>
Link: https://patch.msgid.link/20251108114739.9255-3-marcosmola2@gmail.com
[ij: changelog taken partially from v1]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add panel_hd_mode to toggle the panel mode between single and high
definition modes.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251102215319.3126879-4-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The fw_attributes_class provides a much cleaner interface to all of the
attributes introduced to asus-wmi. This patch moves all of these extra
attributes over to fw_attributes_class, and shifts the bulk of these
definitions to a new kernel module to reduce the clutter of asus-wmi
with the intention of deprecating the asus-wmi attributes in future.
The work applies only to WMI methods which don't have a clearly defined
place within the sysfs and as a result ended up lumped together in
/sys/devices/platform/asus-nb-wmi/ with no standard API.
Where possible the fw attrs now implement defaults, min, max, scalar,
choices, etc. As en example dgpu_disable becomes:
/sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
├── current_value
├── display_name
├── possible_values
└── type
as do other attributes.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The variable udata cannot be NULL because irdma_create_user_ah() always
receives it. Therefore, the if() check can be safely removed.
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://patch.msgid.link/20251112120253.68945-1-islituo@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Per design recommendations, the memory clock can be gated when there
is no in-flight transfer, which helps save power. This feature is
introduced alongside internal phase support, and this patch enables it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SpacemiT K1 SoC QSPI IP uses the Freescale driver. Enable it as a
module in the default kernel configuration for RISC-V.
Acked-by: Paul Walmsley <pjw@kernel.org> # for arch/riscv
Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
On stock kernel gcc 14 emits avoidable register spillage:
endbr64
call ffffffff81374630 <__fentry__>
push %r13
push %r12
push %rbx
sub $0x8,%rsp
[snip]
Total fast path is 99 bytes.
Moving the slowpath out avoids it and shortens the fast path to 74
bytes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251110095634.1433061-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Helps out some of the asm, the routine is still a mess.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251109125254.1288882-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Support for block sizes greater than the page size depends on large
folios, which in turn require CONFIG_TRANSPARENT_HUGEPAGE to be enabled.
Because the code is wrapped in multiple layers of abstraction, this
dependency is rather obscure, so users may not realize it and may be
unsure how to enable LBS.
As suggested by Theodore, I have added hint messages in sb_set_blocksize
so that users can distinguish whether a mount failure with block size
larger than page size is due to lack of filesystem support or the absence
of CONFIG_TRANSPARENT_HUGEPAGE.
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20251110043226.GD2988753@mit.edu
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20251110124714.1329978-1-libaokun@huaweicloud.com
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Mateusz Guzik <mjguzik@gmail.com> says:
In short, MAY_WRITE checks are elided.
This obsoletes the idea of pre-computing if perm checks are necessary as
that turned out to be too hairy. The new code has 2 more branches per
path component compared to that idea, but the perf difference for
typical paths (< 6 components) was basically within noise. To be
revisited if someone(tm) removes other slowdowns.
Instead of the pre-computing thing I added IOP_FASTPERM_MAY_EXEC so that
filesystems like btrfs can still avoid the hard work.
* patches from https://patch.msgid.link/20251107142149.989998-1-mjguzik@gmail.com:
fs: retire now stale MAY_WRITE predicts in inode_permission()
btrfs: utilize IOP_FASTPERM_MAY_EXEC
fs: speed up path lookup with cheaper handling of MAY_EXEC
Link: https://patch.msgid.link/20251107142149.989998-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The primary non-MAY_WRITE consumer now uses lookup_inode_permission_may_exec().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251107142149.989998-4-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Root filesystem was ext4, btrfs was mounted on /testfs.
Then issuing access(2) in a loop on /testfs/repos/linux/include/linux/fs.h
on Sapphire Rapids (ops/s):
before: 3447976
after: 3620879 (+5%)
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251107142149.989998-3-mjguzik@gmail.com
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The generic inode_permission() routine does work which is known to be of
no significance for lookup. There are checks for MAY_WRITE, while the
requested permission is MAY_EXEC. Additionally devcgroup_inode_permission()
is called to check for devices, but it is an invariant the inode is a
directory.
Absent a ->permission func, execution lands in generic_permission()
which checks upfront if the requested permission is granted for
everyone.
We can elide the branches which are guaranteed to be false and cut
straight to the check if everyone happens to be allowed MAY_EXEC on the
inode (which holds true most of the time).
Moreover, filesystems which provide their own ->permission routine can
take advantage of the optimization by setting the IOP_FASTPERM_MAY_EXEC
flag on their inodes, which they can legitimately do if their MAY_EXEC
handling matches generic_permission().
As a simple benchmark, as part of compilation gcc issues access(2) on
numerous long paths, for example /usr/lib/gcc/x86_64-linux-gnu/12/crtendS.o
Issuing access(2) on it in a loop on ext4 on Sapphire Rapids (ops/s):
before: 3797556
after: 3987789 (+5%)
Note: this depends on the not-yet-landed ext4 patch to mark inodes with
cache_no_acl()
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251107142149.989998-2-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that we build with -fms-extensions, union pipe_index can be
included as an anonymous member in struct pipe_inode_info, avoiding
the duplication.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://patch.msgid.link/20251023082142.2104456-1-linux@rasmusvillemoes.dk
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Here are some more modem and ftdi device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaRRElgAKCRALxc3C7H1l
CKLjAQDdFvsO5vCAleIC/OJPsq7fMqH3CY9Os2kGOSYErtsh+AD+PA0h2Nfqk04D
l1Qsm8zfW21CtXOwl0rwZeLavbg+KA4=
=wxRc
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.18-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial devices ids for 6.18-rc6
Here are some more modem and ftdi device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add support for Rolling RW101R-GL
USB: serial: ftdi_sio: add support for u-blox EVK-M101
The following commit introduced a build failure on x86-32:
21954c8a0ff ("perf/x86/intel: Process arch-PEBS records or record fragments")
...
arch/x86/events/intel/ds.c:2983:24: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
The forced type conversion to 'u64' and 'void *' are not 32-bit clean,
but they are also entirely unnecessary: ->pebs_vaddr is 'void *' already,
and integer-compatible pointer arithmetics will work just fine on it.
Fix & simplify the code.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: d21954c8a0 ("perf/x86/intel: Process arch-PEBS records or record fragments")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://patch.msgid.link/20251029102136.61364-10-dapeng1.mi@linux.intel.com
SpacemiT K1 SoC is equipped with a total of nine I2C controllers,
ranging from I2C0 to I2C8.
Prior to this change, only I2C2 and I2C8 were explicitly defined
within the device tree. This patch comprehensively adds the
device tree node definitions for I2C controller 0, 1, 4 to 7.
The I2C3 node is not added because it belongs exclusively to the
secure domain which not used in the linux realm.
All newly added I2C nodes are set to "disabled" status by default,
allowing future board-specific device tree to enable and configure.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://lore.kernel.org/r/20251105-k1-add-i2c-node-v1-2-d18dae246137@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
On VHE, the Fine Grain Traps registers are written to hardware in
kvm_arch_vcpu_load()->..->__activate_traps_hfgxtr(), but the fgt array is
computed later, in kvm_vcpu_load_fgt(). This can lead to zero being written
to the FGT registers the first time a VCPU is loaded. Also, any changes to
the fgt array will be visible only after the VCPU is scheduled out, and
then back in, which is not the intended behaviour.
Fix it by computing the fgt array just before the fgt traps are written
to hardware.
Fixes: fb10ddf35c ("KVM: arm64: Compute per-vCPU FGTs at vcpu_load()")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251112102853.47759-1-alexandru.elisei@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is no functional change with this patch. It simply refactors
function fuse_conn_put() to not use negative logic, which makes it more
easier to read.
Signed-off-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the infrastructure introduced to periodically invalidate expired
dentries, it is now possible to add an extra work queue to invalidate
dentries when an epoch is incremented. This work queue will only be
triggered when the 'inval_wq' parameter is set.
Signed-off-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch adds the necessary infrastructure to keep track of all dentries
created for FUSE file systems. A set of rbtrees, protected by hashed
locks, will be used to keep all these dentries sorted by expiry time.
A new module parameter 'inval_wq' is also added. When set, it will start
a work queue which will periodically invalidate expired dentries. The
value of this new parameter is the period, in seconds, for this work
queue. Once this parameter is set, every new dentry will be added to one
of the rbtrees.
When the work queue is executed, it will check all the rbtrees and will
invalidate those dentries that have timed-out.
The work queue period can not be smaller than 5 seconds, but can be
disabled by setting 'inval_wq' to zero (which is the default).
Signed-off-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add and export a new helper d_dispose_if_unused() which is simply a wrapper
around to_shrink_list(), to add an entry to a dispose list if it's not used
anymore.
Also export shrink_dentry_list() to kill all dentries in a dispose list.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
