Set all user-return MSRs to their post-TD-exit value when preparing to run
a TDX vCPU to ensure the value that KVM expects to be loaded after running
the vCPU is indeed the value that's loaded in hardware. If the TDX-Module
doesn't actually enter the guest, i.e. doesn't do VM-Enter, then it won't
"restore" VMM state, i.e. won't clobber user-return MSRs to their expected
post-run values, in which case simply updating KVM's "cached" value will
effectively corrupt the cache due to hardware still holding the original
value.
In theory, KVM could conditionally update the current user-return value if
and only if tdh_vp_enter() succeeds, but in practice "success" doesn't
guarantee the TDX-Module actually entered the guest, e.g. if the TDX-Module
synthesizes an EPT Violation because it suspects a zero-step attack.
Force-load the expected values instead of trying to decipher whether or
not the TDX-Module restored/clobbered MSRs, as the risk doesn't justify
the benefits. Effectively avoiding four WRMSRs once per run loop (even if
the vCPU is scheduled out, user-return MSRs only need to be reloaded if
the CPU exits to userspace or runs a non-TDX vCPU) is likely in the noise
when amortized over all entries, given the cost of running a TDX vCPU.
E.g. the cost of the WRMSRs is somewhere between ~300 and ~500 cycles,
whereas the cost of a _single_ roundtrip to/from a TDX guest is thousands
of cycles.
Fixes: e0b4f31a3c ("KVM: TDX: restore user ret MSRs")
Cc: stable@vger.kernel.org
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://patch.msgid.link/20251030191528.3380553-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix an interaction between SMM and PV asynchronous #PFs where an #SMI can
cause KVM to drop an async #PF ready event, and thus result in guest tasks
becoming permanently stuck due to the task that encountered the #PF never
being resumed. Specifically, don't clear the completion queue when paging
is disabled, and re-check for completed async #PFs if/when paging is
enabled.
Prior to commit 2635b5c4a0 ("KVM: x86: interrupt based APF 'page ready'
event delivery"), flushing the APF queue without notifying the guest of
completed APF requests when paging is disabled was "necessary", in that
delivering a #PF to the guest when paging is disabled would likely confuse
and/or crash the guest. And presumably the original async #PF development
assumed that a guest would only disable paging when there was no intent to
ever re-enable paging.
That assumption fails in several scenarios, most visibly on an emulated
SMI, as entering SMM always disables CR0.PG (i.e. initially runs with
paging disabled). When the SMM handler eventually executes RSM, the
interrupted paging-enabled is restored, and the async #PF event is lost.
Similarly, invoking firmware, e.g. via EFI runtime calls, might require a
transition through paging modes and thus also disable paging with valid
entries in the competion queue.
To avoid dropping completion events, drop the "clear" entirely, and handle
paging-enable transitions in the same way KVM already handles APIC
enable/disable events: if a vCPU's APIC is disabled, APF completion events
are not kept pending and not injected while APIC is disabled. Once a
vCPU's APIC is re-enabled, KVM raises KVM_REQ_APF_READY so that the vCPU
recognizes any pending pending #APF ready events.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251015033258.50974-4-mlevitsk@redhat.com
[sean: rework changelog to call out #PF injection, drop "real mode"
references, expand the code comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fix a semi theoretical race condition related to a lack of memory barriers
when dealing with vcpu->arch.apf.pageready_pending. In theory, the "ready"
side could see a stale pageready_pending and neglect to kick the vCPU, and
thus allow the vCPU to enter the guest with a pending KVM_REQ_APF_READY
and no kick/IPI on the way, in which case the KVM would fail to deliver a
completed async #PF event to the guest in a timely manner as the request
would be recognized only on the next (coincidental) VM-Exit.
kvm_arch_async_page_present_queued() running in workqueue context:
kvm_make_request(KVM_REQ_APF_READY, vcpu);
/* memory barrier is missing here*/
if (!vcpu->arch.apf.pageready_pending)
kvm_vcpu_kick(vcpu);
kvm_set_msr_common() running in task context:
vcpu->arch.apf.pageready_pending = false;
/* memory barrier is missing here*/
And later, vcpu_enter_guest() running in task context:
if (kvm_check_request(KVM_REQ_APF_READY, vcpu))
kvm_check_async_pf_completion(vcpu)
Add missing full memory barriers in both cases to avoid theoretical
case of not kicking the vCPU thread.
Note that the bug is mostly theoretical because kvm_make_request()
uses an atomic operation, which is always serializing on x86, requiring
only for documentation purposes the smp_mb__after_atomic() after it
(smp_mb__after_atomic() is a NOP on x86).
The second missing barrier, between kvm_set_msr_common() and
vcpu_enter_guest(), isn't strictly needed because KVM executes several
barriers in between calling these functions, however it still makes
sense to have an explicit barrier to be on the safe side and to document
the ordering dependencies.
Finally, also use READ_ONCE/WRITE_ONCE.
Thanks a lot to Paolo for the help with this patch.
Link: https://lore.kernel.org/all/7c7a5a75-a786-4a05-a836-4368582ca4c2@redhat.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://patch.msgid.link/20251015033258.50974-3-mlevitsk@redhat.com
[sean: explain the race and its impact in more detail]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test cases to check outcome of fair GuC context or doorbells
IDs allocations for regular and admin-only PF mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251106165932.2143-1-michal.wajdeczko@intel.com
Instead of trying very hard to find the largest fair number of GuC
doorbell IDs that could be allocated for VFs on the current GT, pick
some smaller rounded down to power-of-two value that is more likely
to be provisioned in the same manner by the other PF instance:
num VFs | num doorbells
--------+--------------
63..32 | 4
31..16 | 8
15..8 | 16
7..4 | 32
3..2 | 64
1 | 128 (regular PF)
1 | 240 (admin only PF)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251105183253.863-3-michal.wajdeczko@intel.com
Instead of trying very hard to find the largest fair number of GuC
context IDs that could be allocated for VFs on the current GT, pick
some smaller rounded down to power-of-two value that is more likely
to be provisioned in the same manner by the other PF instance:
num VFs | num contexts
--------+-------------
63..32 | 1024
31..16 | 2048
15..8 | 4096
7..4 | 8192
3..2 | 16384
1 | 32768 (regular PF)
1 | 64512 (admin only PF)
Add also helper function to determine if the PF is admin-only,
and for now use .probe_display flag for that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251105183253.863-2-michal.wajdeczko@intel.com
For whatever unknown reason the pmdemand code is using a custom
50 usec fast polling timeout instead of the normal 2 usec
value. Switch to the standard value to get rid of the special
case.
The eventual aim is to get rid of the fast vs. slow timeout
entirely and switch over to poll_timeout_us().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-11-ville.syrjala@linux.intel.com
For whatever unknown reason the HDCP code is using a custom
10 usec fast polling timeout instead of the normal 2 usec
value. Switch to the standard value to get rid of the special
case.
The eventual aim is to get rid of the fast vs. slow timeout
entirely and switch over to poll_timeout_us().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-10-ville.syrjala@linux.intel.com
The LT PHY code is abusing intel_de_wait_custom() in all kinds of weird
ways. Get rid of the weird fast timeouts, and just use the slow ones.
For consistency with intel_wait_for_register() we'll stick to the
default 2 usec fast timeout for all cases.
Someone really needs to properly document where all these magic numbers
came from...
This will let us eventually nuke intel_de_wait_custom() and convert
over to poll_timeout_us().
v2: Go for the longer (ms) timeout in case it actually matters
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Include the units the in the define name for XELPDP_PORT_RESET_END_TIMEOUT
to make it match all its other counterparts.
v2: It's _MS not _US (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106155249.2810-1-ville.syrjala@linux.intel.com
The slow vs. fast timeout stuff is really just an implementation
detail. Let's not spread that terminology in random timeout defines.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-7-ville.syrjala@linux.intel.com
XELPDP_MSGBUS_TIMEOUT_FAST_US looks to be just an obfuscated version
of the default 2 microsecond fast timeout used by
intel_wait_for_register(). Get rid of it to make it clear what's going
on here.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-6-ville.syrjala@linux.intel.com
There was a completely unjustified change to the cx0 powerdown
timeout, and the way it was done now prevents future conversion
to poll_timeout_us().
Assuming there was some reason the bigger timeout let's nuke
the old short timeout (XELPDP_PORT_POWERDOWN_UPDATE_TIMEOUT_US)
nd replace it with the bigger timeout
(XELPDP_PORT_POWERDOWN_UPDATE_TIMEOUT_MS).
For consistency with intel_wait_for_register() we'll stick to the
default 2 usec for the fast timeout.
v2: Go for the longer (ms) timeout in case it actually matters
v3: Note the defaullt 2 usec fast timeout (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The actual timeout used isn't particularly interesting, so
don't print it. Makes the code simpler.
The debugs are also using some random capitalizaton rule.
Clean that up a bit while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The actual timeout used isn't particularly interesting, so
don't print it. Makes the code simpler.
The debugs are also using some random capitalizaton rule.
Clean that up a bit while at it.
Also intel_cx0_powerdown_change_sequence() used one timeout
in the actual code but printed a different one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename irq_polling_work to qaic_irq_polling_work to reduce ambiguity
and avoid potential naming conflicts in the future.
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031192511.3179130-1-zachary.mckevitt@oss.qualcomm.com
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
After subsystem of the device has crashed it sends a message with
command DEBUG_TRANSFER_INFO to kernel(host). Send ACK for that message
and then prepare to collect the ramdump of the subsystem
Steps of crashdump collection is as follows,
1) Device sends DEBUG_TRANSFER_INFO message indicating that device wants
to send crashdump.
2) Send an acknowledgment to that message either ACK or NACK.
a) NACK will inform the device that host will not download the
crashdump
b) ACK will inform the device that host will download the crashdump
3) Along with the DEBUG_TRANSFER_INFO we receive a table base address and
its length, use that to download that table from device.
a) This table is meta data of the crashdump and not the actual
crashdump.
4) After we respond as ACK for message received on step 1) we start
downloading the table. Use series of MEMORY_READ/MEMORY_READ_RSP SSR
commands to download the entire table.
5) Each entry in the table represents a segment of crashdump. Once the
table downloading is complete, iterate through each entry of table
and download each crashdump segment(same as table itself). Table entry
contains the memory base address and length along with other info.
6) After the entire crashdump is downloaded send DEBUG_TRANSFER_DONE
which marks that host is terminating the crashdump transfer. This
message can be send in both success or error case.
7) After receiving DEBUG_TRANSFER_DONE_RSP hand over the crashdump to
dev_coredumpv() and free all the necessary memory.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <pkanojiy@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-4-zachary.mckevitt@oss.qualcomm.com
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
acpi_processor_setup_cstates() and acpi_processor_setup_cpuidle_cx()
are called after successfully obtaining power information. Among other
things, these setup functions check the C-state count against zero.
However, that check is done by acpi_processor_get_power_info_cst()
which will cause acpi_processor_get_power_info() to fail if it does
no pass, so the checks in the two functions mentioned above are
redundant.
Drop those redundant checks.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
[ rjw: Subject and changelog rewrite ]
Link: https://patch.msgid.link/20251105093647.3557248-1-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On 32-bit architectures, when GFP_NOFS is used, the file cache for write
operations cannot be allocated from the highmem and CMA.
Since mapping->gfp_mask is set to GFP_HIGHUSER_MOVABLE during inode
allocation, using mapping_gfp_mask(mapping) as the GFP flag of getting file
cache for writing is more efficient for 32-bit architectures.
Additionally, use FGP_NOFS to avoid potential deadlock issues caused by
GFP_FS in GFP_HIGHUSER_MOVABLE
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For 'always-on' and 'boot-on' regulators, the set_machine_constraints()
may enable supply before enabling the main regulator, however if the
latter fails, the function returns with an error but the supply remains
enabled.
When this happens, the regulator_register() function continues on the
error path where it puts the supply regulator. Since enabling the supply
is not balanced with a disable call, a warning similar to the following
gets issued from _regulator_put():
[ 1.603889] WARNING: CPU: 2 PID: 44 at _regulator_put+0x8c/0xa0
[ 1.603908] Modules linked in:
[ 1.603926] CPU: 2 UID: 0 PID: 44 Comm: kworker/u16:3 Not tainted 6.18.0-rc4 #0 NONE
[ 1.603938] Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (DT)
[ 1.603945] Workqueue: async async_run_entry_fn
[ 1.603958] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.603967] pc : _regulator_put+0x8c/0xa0
[ 1.603976] lr : _regulator_put+0x7c/0xa0
...
[ 1.604140] Call trace:
[ 1.604145] _regulator_put+0x8c/0xa0 (P)
[ 1.604156] regulator_register+0x2ec/0xbf0
[ 1.604166] devm_regulator_register+0x60/0xb0
[ 1.604178] rpm_reg_probe+0x120/0x208
[ 1.604187] platform_probe+0x64/0xa8
...
In order to avoid this, change the set_machine_constraints() function to
disable the supply if enabling the main regulator fails.
Fixes: 05f224ca66 ("regulator: core: Clean enabling always-on regulators + their supplies")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20251107-regulator-disable-supply-v1-1-c95f0536f1b5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPU via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_perf_ctrs_in_pcc() checks if the CPPC
perf-ctrs are in a PCC region for all the present CPUs, which breaks
when the kernel is booted with "nosmt=force".
Hence, limit the check only to the online CPUs.
Fixes: ae2df912d1 ("ACPI: CPPC: Disable FIE if registers in PCC regions")
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-5-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_allow_fast_switch() checks for the validity
of the _CPC object for all the present CPUs. This breaks when the
kernel is booted with "nosmt=force".
Check fast_switch capability only on online CPUs
Fixes: 15eece6c5b ("ACPI: CPPC: Fix NULL pointer dereference when nosmp is used")
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-4-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function acpi_cpc_valid() checks for the validity of the
_CPC object for all the present CPUs. This breaks when the kernel is
booted with "nosmt=force".
Hence check the validity of the _CPC objects of only the online CPUs.
Fixes: 2aeca6bd02 ("ACPI: CPPC: Check present CPUs for determining _CPC is valid")
Reported-by: Christopher Harris <chris.harris79@gmail.com>
Closes: https://lore.kernel.org/lkml/CAM+eXpdDT7KjLV0AxEwOLkSJ2QtrsvGvjA2cCHvt1d0k2_C4Cw@mail.gmail.com/
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Tested-by: Chrisopher Harris <chris.harris79@gmail.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-3-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 279f838a61 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") introduced the ability to detect the
preferred core on AMD platforms by checking if there at least two
distinct highest_perf values.
However, it uses for_each_present_cpu() to iterate through all the
CPUs in the platform, which is problematic when the kernel is booted
with "nosmt=force" commandline option.
Hence limit the search to only the online CPUs.
Fixes: 279f838a61 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Christopher Harris <chris.harris79@gmail.com>
Closes: https://lore.kernel.org/lkml/CAM+eXpdDT7KjLV0AxEwOLkSJ2QtrsvGvjA2cCHvt1d0k2_C4Cw@mail.gmail.com/
Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org>
Tested-by: Chrisopher Harris <chris.harris79@gmail.com>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://patch.msgid.link/20251107074145.2340-2-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Failing to set power off indicates an unrecoverable hardware or firmware
error. Update the driver to treat such a failure as a fatal condition
and stop further operations that depend on successful power state
transition.
This prevents undefined behavior when the hardware remains in an
unexpected state after a failed power-off attempt.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251106180521.1095218-1-lizhi.hou@amd.com
Enable Wildcat Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20251105215020.1984036-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When apic=verbose is specified, the LAPIC timer calibration prints its results
to the console. At least while debugging virtualization code, the CPU and bus
frequencies are printed incorrectly.
Specifically, for a 1.7 GHz CPU with 1 GHz bus frequency and HZ=1000,
the log includes a superfluous 0 after the period:
..... calibration result: 999978
..... CPU clock speed is 1696.0783 MHz.
..... host bus clock speed is 999.0978 MHz.
Looking at the code, this only worked as intended for HZ=100. After the fix,
the correct frequency is printed:
..... calibration result: 999828
..... CPU clock speed is 1696.507 MHz.
..... host bus clock speed is 999.828 MHz.
There is no functional change to the LAPIC calibration here, beyond the
printing format changes.
[ bp: - Massage commit message
- Figures it should apply this patch about ~4 years later
- Massage it into the current code ]
Suggested-by: Markus Napierkowski <markus.napierkowski@cyberus-technology.de>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20211030142148.143261-1-js@alien8.de
Introduce the function bdev_zone_start() as a more explicit (and clear)
replacement for ALIGN_DOWN() to get the start sector of a zone
containing a particular sector of a zoned block device.
Use this new helper in blkdev_get_zone_info() and
blkdev_report_zones_cached().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The helper function blk_zone_wp_offset() is called from
disk_zone_wplug_sync_wp_offset(), and again called from
blk_revalidate_seq_zone() right after the call to
disk_zone_wplug_sync_wp_offset().
Change disk_zone_wplug_sync_wp_offset() to return the value of obtained
with blk_zone_wp_offset() to avoid this double call, which simplifies a
little blk_revalidate_seq_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_zone_wp_offset() is always called with a struct blk_zone obtained
from the device, that is, it will never see the BLK_ZONE_COND_ACTIVE
condition. However, handling this condition makes this function more
solid and will also avoid issues when propagating cached report requests
to underlying stacked devices is implemented. Add BLK_ZONE_COND_ACTIVE
as a new case in blk_zone_wp_offset() switch.
Also while at it, change the handling of the full condition to return
UINT_MAX for the zone write pointer to reflect the fact that the write
pointer of a full zone is invalid.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The HPA to DPA translation for poison injection assumes that the
base address starts from where the CXL region begins. When the
extended linear cache is active, the offset can be within the DRAM
region. Adjust the offset so that it correctly reflects the offset
within the CXL region.
[ dj: Add fixes tag from Alison ]
Fixes: c3dd67681c ("cxl/region: Add inject and clear poison by region offset")
Link: https://patch.msgid.link/20251031173224.3537030-5-dave.jiang@intel.com
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
SMB2_change_notify called smb2_validate_iov() but ignored the return
code, then kmemdup()ed using server provided OutputBufferOffset/Length.
Check the return of smb2_validate_iov() and bail out on error.
Discovered with help from the ZeroPath security tooling.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Fixes: e3e9463414 ("smb3: improve SMB3 change notification support")
Signed-off-by: Steve French <stfrench@microsoft.com>
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config() callback
in the driver
- correct schema $id path in ti,twl4030 DT bindings
-----BEGIN PGP SIGNATURE-----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=4JGk
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring buffer
then calling rb_get_reader_page() will return NULL as there's no
pages left. But this isn't checked for before calling rb_get_reader_page()
and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then simply
exit the routine.
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly clean
up what was allocated. Make sure everything is freed properly on error.
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as "--threads"
whereas "--threads" is actually represented by "-e".
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaQ3wOxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrYvAP9zLYz/pCTTCY64/Yx2gMimFt7g9XhO
b5xL+mZWoiYJigD+Ma7IpRC1QVyAk5YgxkWJqpEyHrxE84fBIBevoTRBTQE=
=+x8m
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmkNsrEbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiajiUH/jeyKHGEMJiGd9yu0zfX
fElNQpfogT+X/6ZNZGqA78WiRWSfooFOEG8p0OPV5q3zgdVcp++Ap3WoiB0Yi8W0
tbSptM6MJOeP1ZdvsjoBIza5YkRwOUnHl76eBcRrrH+34wd9vGkhPkN4sd+KOwbP
YPc8Iq6FKNxYyeiFUEgsERaIMT+WJbv6Du47VbwFNw4SfmmPO+eIfwCixw+OJ41z
zt4BDvGHStgUiY9y09qSZq45dOZ2rigt9mTOtosJhgxTO3kAZSO7e31B3XOjLxfH
sDXtmm4xV4b6N62ukVAE2ayRj09PQfQsX29SsQJjm7PrFIcRmCkBu6INP0+AIvss
yRY=
=okeg
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Fix for potential infinite loop in kmalloc_nolock() when debugging
is enabled for the cache (Vlastimil Babka)
* tag 'slab-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: prevent infinite loop in kmalloc_nolock() with debugging
Address two issues indicated by checkpatch:
- Trailing statements should be on next line.
- Prefer 'unsigned int' to bare use of 'unsigned'.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251106045158.3198061-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If image writing fails, a return code is passed up to the caller, but
none of the callers log anything to the log and so the only record
of it is the return code that userspace gets.
Adjust the logging so that the image size and speed of writing is
only emitted on success and if there is an error, it's saved to the
logs.
Fixes: a06c6f5d3c ("PM: hibernate: Move to crypto APIs for LZO compression")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251105180506.137448-1-safinaskar@gmail.com/
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Askar Safin <safinaskar@gmail.com>
Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
[ rjw: Added missing braces after "else", changelog edits ]
Link: https://patch.msgid.link/20251106045158.3198061-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=D3Vm
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
All fixes in the UFS driver. The big contributor to the diffstats is
the Intel controller S0ix/S3 fix which has to special case the
suspend/resume patch for intel controllers in ufshcd-pci.c
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaQ0gPxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWCSwEAzH0qcW02Vy5mbZR8xwDIp0ft8XD0P9kq
+YNPvxNEC8gA/22DaDU6KHlDGlNKpwpACzdzbh3yA694ig0eabPX9PhB
=pmib
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
The i915_gem_object_get_frontbuffer() name is rather confusing wrt.
intel_frontbuffer_get(). Rename to i915_gem_object_frontbuffer_lookup()
to make things less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----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=QNQi
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- More safely detect RDMA capable devices correctly
* tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: detect RDMA capable netdevs include IPoIB
ksmbd: detect RDMA capable lower devices when bridge and vlan netdev is used
The current attempted split between xe/i915 vs. display
for intel_frontbuffer is a mess:
- the i915 rcu leaks through the interface to the display side
- the obj->frontbuffer write-side is now protected by a display
specific spinlock even though the actual obj->framebuffer
pointer lives in a i915 specific structure
- the kref is getting poked directly from both sides
- i915_active is still on the display side
Clean up the mess by moving everything about the frontbuffer
lifetime management to the i915/xe side:
- the rcu usage is now completely contained in i915
- frontbuffer_lock is moved into i915
- kref is on the i915/xe side (xe needs the refcount as well
due to intel_frontbuffer_queue_flush()->intel_frontbuffer_ref())
- the bo (and its refcounting) is no longer on the display side
- i915_active is contained in i915
I was pondering whether we could do this in some kind of smaller
steps, and perhaps we could, but it would probably have to start
with a bunch of reverts (which for sure won't go cleanly anymore).
So not convinced it's worth the hassle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-10-ville.syrjala@linux.intel.com
After upcoming intel_frontbuffer lifetime related changes we
won't need intel_frontbuffer::obj for anything apart from
getting at the display. Add a direct pointer for that instead
so that the obj pointer can be completely eliminated.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
