Instead of translating to/from driver specific flags for packet time
stamp control use the common flags directly. This simplifies the driver
as the translating code can be removed while at the same time making it
clear the flags are not flags written to hardware registers.
One thing to note is that the bit-wise and check in rtsn_rx() of
RCAR_GEN4_RXTSTAMP_TYPE_V2_L2_EVENT is replaced with a not set check of
HWTSTAMP_FILTER_NONE. This is okay as the bit of device specific event
replaced was set for all modes except HWTSTAMP_FILTER_NONE.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251104222420.882731-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of translating to/from driver specific flags for packet time
stamp control use the common flags directly. This simplifies the driver
as the translating code can be removed while at the same time making it
clear the flags are not flags written to hardware registers.
One thing to note is that the bit-wise and check in rswitch_rx() of
RCAR_GEN4_RXTSTAMP_TYPE_V2_L2_EVENT is replaced with a not set check of
HWTSTAMP_FILTER_NONE. This is okay as the bit of device specific event
replaced was set for all modes except HWTSTAMP_FILTER_NONE.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251104222420.882731-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The struct rcar_gen4_ptp_private provides two fields for convenience of
its users, tstamp_tx_ctrl and tstamp_rx_ctrl. These fields are not used
by the rcar_gen4_ptp driver itself but only by the drivers using it.
Upcoming work will enable the RAVB driver currently only supporting gPTP
on pre-Gen4 SoCs to use the Gen4 implementation as well. To facilitate
this the convenience of having these fields in struct
rcar_gen4_ptp_private becomes a problem as the RAVB driver already have
it's own driver specific fields for the same thing.
Move the fields from struct rcar_gen4_ptp_private to each driver using
the Gen4 gPTP clocks own private data structures. There is no functional
change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251104222420.882731-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The files rcar_gen4_ptp.{c,h} implements an abstraction of the gPTP
support implemented together with different other IP blocks. The first
device added which supported this was RSWITCH on R-Car S4.
While doing so the RSWITCH R-Car S4 specific offset was added to the
generic Gen4 gPTP header file. Move it to the RSWITCH driver to make it
clear it only applies to this driver.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251104222420.882731-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent change on enabling --buildid-mmap by default brought an issue
with build-id handling. With build-ID in MMAP2 records, we don't need
to save the build-ID table in the header of a perf data file.
But the actual file contents still need to be cached in the debug
directory for annotation etc. Split the build-ID header processing and
caching and make sure perf record to save hit DSOs in the build-ID cache
by moving perf_session__cache_build_ids() to the end of the record__
finish_output().
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The nvme virtual boundary is only required for the PRP format. Devices
that can use SGL for DMA don't need it for IO queues. Drop reporting it
for such devices; rdma fabrics controllers will continue to use the
limit as they currently don't report any boundary requirements, but tcp
and fc never needed it in the first place so they get to report no
virtual boundary.
Applications may continue to align to the same virtual boundaries for
optimization purposes if they want, and the driver will continue to
decide whether to use the PRP format the same as before if the IO allows
it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The blk-mq dma iterator has an optimization for requests that align to
the device's iommu merge boundary. This boundary may be larger than the
device's virtual boundary, but the code had been depending on that queue
limit to know ahead of time if the request is guaranteed to align to
that optimization.
Rather than rely on that queue limit, which many devices may not report,
save the lowest set bit of any boundary gap between each segment in the
bio while checking the segments. The request stores the value for
merging and quickly checking per io if the request can use iova
optimizations.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function create_field_var() allocates memory for 'val' through
create_hist_field() inside parse_atom(), and for 'var' through
create_var(), which in turn allocates var->type and var->var.name
internally. Simply calling kfree() to release these structures will
result in memory leaks.
Use destroy_hist_field() to properly free 'val', and explicitly release
the memory of var->type and var->var.name before freeing 'var' itself.
Link: https://patch.msgid.link/20251106120132.3639920-1-zilin@seu.edu.cn
Fixes: 02205a6752 ("tracing: Add support for 'field variables'")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of a comment, just use two cachline groups to document the intent
for members often accessed in fast or slow path.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251031212103.310683-11-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move NETDEV_XDP_ACT_ZC into xdp_sock_drv.h header such that external code
can reuse it, and rename it into more generic NETDEV_XDP_ACT_XSK.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251031212103.310683-7-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Reported-by: syzbot+92a3745cea5ec6360309@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/690babec.050a0220.baf87.0064.GAE@google.com/
Link: https://lore.kernel.org/20251016132848.1b11bb37@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- tprobe-events: Fix to register tracepoint correctly
tprobe-events missed to set tracepoint data structure before
registering callback when enabling it. This sets it correctly.
- tprobe-events: Fix to put tracepoint_user when disable the event.
tprobe-events missed to unregister tracepoint callback when the
event is disabled. This ensures to unregister it.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmkNMDwbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bqMoH/i/hGqn3fM9y2MfoL7Fm
bPaK6tuRjypbifRSTxmelBUE6cvKcW36JrfDnxTyCfUGP8ye5NXtexwojFMUZoOH
DuU0g+uizywcgO2SknEiAIyh0QnoJyfj+vh/d9rcGUGai0Tf2gswPuVg3NHEq6Uq
3397uR3dBC8D0DY1qzEWyfqPGlfdNmh5i8cFaZoIlXa3Tk+RfMyJo4T66eshtdnf
S7Lg33wiociPrSAssPlSXau9y5BEwfHY7uArKbLx6fI8D+fS6BqJMNUc6uYnWfOe
UtiXw8NE+G5h5YtLh2ryAdnodHaiA+SQ6rZFFKg7mqIVNWJSSczvjwy501pD9UbE
kVE=
=K+uv
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- tprobe-events: Fix to register tracepoint correctly
tprobe-events missed to set tracepoint data structure before
registering callback when enabling it. This sets it correctly.
- tprobe-events: Fix to put tracepoint_user when disable the event
tprobe-events missed to unregister tracepoint callback when the event
is disabled. This ensures to unregister it.
* tag 'probes-fixes-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
tracing: tprobe-events: Fix to register tracepoint correctly
- Add James Clark as a perf tools reviewer.
- Handle '1' type symbols in /proc/kallsyms, related to anonymous Rust closures
in the DRM panic QR encoder, caught by 'perf test'.
- Sync kernel header copies: MSRs, uprobe syscall, DRM_IOCTL_GEM_CHANGE_HANDLE,
KVM exit reasons, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaQ0FawAKCRCyPKLppCJ+
J+QLAP9NMeWfs1/7Wyt5P028Ul5pB55hLc3MUv33ul94CV9sPAD+K57sXYgesAz9
serupEojk9NKbJdt6Bx0WYBGh/XivgI=
=J28f
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.18-1-2025-11-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Add James Clark as a perf tools reviewer
- Handle '1' type symbols in /proc/kallsyms, related to anonymous
Rust closures in the DRM panic QR encoder, caught by 'perf test'
- Sync kernel header copies: MSRs, uprobe syscall,
DRM_IOCTL_GEM_CHANGE_HANDLE, KVM exit reasons, etc
* tag 'perf-tools-fixes-for-v6.18-1-2025-11-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbols: Handle '1' symbols in /proc/kallsyms
tools headers asm: Sync fls headers header with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources to handle new exit reasons
tools headers svm: Sync svm headers with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
MAINTAINERS: Add James Clark as a perf tools reviewer
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h to pick DRM_IOCTL_GEM_CHANGE_HANDLE
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers x86: Sync table due to introducion of uprobe syscall
tools headers: Sync uapi/linux/fcntl.h with the kernel sources
tools headers: Sync uapi/linux/prctl.h with the kernel source
tools headers uapi: Update fs.h with the kernel sources
tools arch x86: Sync msr-index.h to pick AMD64_{PERF_CNTR_GLOBAL_STATUS_SET,SAVIC_CONTROL}, IA32_L3_QOS_{ABMC,EXT}_CFG
The range tree uses bpf_mem_alloc() that is safe to be called from all
contexts and uses a pre-allocated pool of memory to serve these
allocations.
Replace bpf_mem_alloc() with kmalloc_nolock() as it can be called safely
from all contexts and is more scalable than bpf_mem_alloc().
Remove the migrate_disable/enable pairs as they were only needed for
bpf_mem_alloc() as it does per-cpu operations, kmalloc_nolock() doesn't
need this.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251106170608.4800-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Some RISC-V updates for v6.18-rc5, including:
- A fix to disable KASAN checks while walking a non-current task's
stackframe (following x86)
- A fix for a kvrealloc()-related memory leak in
module_frob_arch_sections()
- Two replacements of strcpy() with strscpy()
- A change to use the RISC-V .insn assembler directive when possible
to assemble instructions from hex opcodes
- Some low-impact fixes in the ptdump code and kprobes test code
-----BEGIN PGP SIGNATURE-----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=BWQb
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- A fix to disable KASAN checks while walking a non-current task's
stackframe (following x86)
- A fix for a kvrealloc()-related memory leak in
module_frob_arch_sections()
- Two replacements of strcpy() with strscpy()
- A change to use the RISC-V .insn assembler directive when possible to
assemble instructions from hex opcodes
- Some low-impact fixes in the ptdump code and kprobes test code
* tag 'riscv-for-linus-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
cpuidle: riscv-sbi: Replace deprecated strcpy in sbi_cpuidle_init_cpu
riscv: KGDB: Replace deprecated strcpy in kgdb_arch_handle_qxfer_pkt
riscv: asm: use .insn for making custom instructions
riscv: tests: Make RISCV_KPROBES_KUNIT tristate
riscv: tests: Rename kprobes_test_riscv to kprobes_riscv
riscv: Fix memory leak in module_frob_arch_sections()
riscv: ptdump: use seq_puts() in pt_dump_seq_puts() macro
riscv: stacktrace: Disable KASAN checks for non-current tasks
- Fix computation of the battery->present value in acpi_battery_read()
to work when battery->id is not zero (Dan Carpenter)
- Fix comment typo in the ACPI CPPC library (Chu Guangqing)
- Fix I2C device references in two ASL examples in the firmware guide
that were broken by a previous update (Jonas Gorski)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkNEd8SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1eDAH/j+Q55xuVhBVlqTTeRY5D+IbspY6HQD+
HUytZFRbljGhFhLAkMRUbHeLQHdFD+AeKefY02VgRPMhwhBjapqvlogNNY1ky6qP
tzJQAQ9SrR4EPkRdRbDE/0aAPoMYguvPX9IdoDZWgb401Bd2Ww7l4llIw9BywDRY
mG+5FGLs7hhsATGQXVhNG0E9KyuBWEml1bHHYLAU6/4mJtfIaBBvTxM5ItzfLUf5
hJlLKMWn7Pbwsm6xbXQmHr6Ex2aBetbGUeUZqwjF0PsYkz9SIIdC0u99VtQ62Fs3
M3gxzKd8ZUHYhhuf82pE6zb9zHYmc9QmJC08je8lZ7dwdVINVJJR83k=
=O/X0
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI Smart Battery Subsystem (SBS)
driver and two documentation issues:
- Fix computation of the battery->present value in acpi_battery_read()
to work when battery->id is not zero (Dan Carpenter)
- Fix comment typo in the ACPI CPPC library (Chu Guangqing)
- Fix I2C device references in two ASL examples in the firmware guide
that were broken by a previous update (Jonas Gorski)"
* tag 'acpi-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: SBS: Fix present test in acpi_battery_read()
ACPI: CPPC: Fix typo in a comment
Documentation: ACPI: i2c-muxes: fix I2C device references
The vblk->vqs releases during freeze. If resume fails before vblk->vqs
is allocated, later freeze/remove may attempt to free vqs again.
Set vblk->vqs to NULL after freeing to avoid double free.
Signed-off-by: Cong Zhang <cong.zhang@oss.qualcomm.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allowing byte aligned memory provides a nice testing ground for
direct-io.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than kmap the the request bio segment for each sector, do
the mapping just once.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to mix errno and blk_status_t error types. Just use the standard
block layer type.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It always returns success, so the code that saves the errors status, but
proceeds without checking it looks a bit odd. Clean this up.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_advance_io_iter() and ublk_copy_io_pages() currently open-code the
iteration over the request's bvecs. Switch to the rq_for_each_segment()
macro provided by blk-mq to avoid reaching into the bio internals and
simplify the code.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_copy_user_pages()/ublk_copy_io_pages() currently uses
iov_iter_get_pages2() to extract the pages from the iov_iter and
memcpy()s between the bvec_iter and the iov_iter's pages one at a time.
Switch to using copy_to_iter()/copy_from_iter() instead. This avoids the
user page reference count increments and decrements and needing to split
the memcpy() at user page boundaries. It also simplifies the code
considerably.
Ming reports a 40% throughput improvement when issuing I/O to the
selftests null ublk server with zero-copy disabled.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_SETUP_NO_MMAP rings remain user accessible even before the ctx
setup is finalised, so use WRITE_ONCE consistently when initialising
rings.
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a refcount to struct io_zcrx_ifq to reverse the refcounting
relationship i.e. rings now reference ifqs instead. As a result of this,
remove ctx->refs that an ifq holds on a ring via the page pool memory
provider.
This ref ifq->refs is held by internal users of an ifq, namely rings and
the page pool memory provider associated with an ifq. This is needed to
keep the ifq around until the page pool is destroyed.
Since ifqs now no longer hold refs to ring ctx, there isn't a need to
split the cleanup of ifqs into two: io_shutdown_zcrx_ifqs() in
io_ring_exit_work() while waiting for ctx->refs to drop to 0, and
io_unregister_zcrx_ifqs() after. Remove io_shutdown_zcrx_ifqs().
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for removing the ref on ctx->refs held by an ifq and
removing io_shutdown_zcrx_ifqs(), move io_unregister_zcrx_ifqs() down
such that it can call io_zcrx_scrub().
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for removing ifq->ctx and making ifq lifetime independent
of ring ctx, add user_struct and mm_struct to io_zcrx_ifq.
In the ifq cleanup path, these are the only fields used from the main
ring ctx to do accounting. Taking a copy in the ifq allows ifq->ctx to
be removed later, including the ctx->refs held by the ifq.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add io_zcrx_ifq arg to io_zcrx_free_area(). A QOL change to reduce line
widths.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor io_{un}account_mem() to take user_struct and mm_struct
directly, instead of accessing it from the ring ctx.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor io_free_region() to take user_struct directly, instead of
accessing it from the ring ctx.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_ring_ctx arg from io_region_pin_pages() and
io_region_allocate_pages() that isn't used.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that start_server_str enforces SO_REUSEADDR, there's no need to keep
using start_reusport_server in tc_tunnel, especially since it only uses
one server at a time.
Replace start_reuseport_server with start_server_str in tc_tunnel test.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-start-server-soreuseaddr-v1-2-1bbd9c1f8d65@bootlin.com
Some tests have to stop/start a server multiple time with the same
listening address. Doing so without SO_REUSADDR leads to failures due to
the socket still being in TIME_WAIT right after the first instance
stop/before the second instance start. Instead of letting each test
manually set SO_REUSEADDR on their servers, it can be done automatically
by start_server_addr for all tests (and without any major downside).
Enforce SO_REUSEADDR in start_server_addr for all tests.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-start-server-soreuseaddr-v1-1-1bbd9c1f8d65@bootlin.com
No zone plugs are allocated when a zone is opened by calling Zone Append
on it. This makes the cached zone reporting report incorrectly empty
zones if the file system is unmounted and report zones is called after
that, e.g. by xfstests test cases using the scratch device.
Fix this by recording if zone append was used on a device, and disable
cached reporting for the device until a ZONE_RESET_ALL happens that
guarantees all zones are empty.
We could probably do even better using a per-zone flag, but the practical
use cache for zone reporting after the initial mount are rather limited,
so let's keep things simple for now.
Fixes: 31f0656a4a ("block: introduce blkdev_report_zones_cached()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk->zones_cond is allocated for all zoned devices, but
disk_free_zone_resources skips it when the zone write plug hash is not
allocated, leaking the allocation for non-mq devices that don't emulate
zone append. This is reported by kmemleak-enabled xfstests for various
tests that use simple device mapper targets.
Fix this by moving all code that requires writes plugs from
disk_free_zone_resources into disk_destroy_zone_wplugs_hash_table
and executing the rest of the code, including the disk->zones_cond
freeing unconditionally.
Fixes: 6e945ffb65 ("block: use zone condition to determine conventional zones")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ECSPI in i.MX51 and i.MX53 support target mode. Current code only support
i.MX53. Remove is_imx53_ecspi() check for target mode to support i.MX51.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20251027110256.543314-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251106-restricted-pointers-stm-v1-1-7d03eb5020ba@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
cgroup_task_dead() is called from finish_task_switch() which runs with
preemption disabled and doesn't allow scheduling even on PREEMPT_RT. The
function needs to acquire css_set_lock which is a regular spinlock that can
sleep on RT kernels, leading to "sleeping function called from invalid
context" warnings.
css_set_lock is too large in scope to convert to a raw_spinlock. However,
the unlinking operations don't need to run synchronously - they just need
to complete after the task is done running.
On PREEMPT_RT, defer the work through irq_work. While the work doesn't need
to happen immediately, it can't be delayed indefinitely either as the dead
task pins the cgroup and task_struct can be pinned indefinitely. Use the
lazy version of irq_work to allow batching and lower impact while ensuring
timely completion.
v2: Use IRQ_WORK_INIT_LAZY instead of immediate irq_work and add explanation
for why the work can't be delayed indefinitely (Sebastian Andrzej Siewior).
Fixes: d245698d72 ("cgroup: Defer task cgroup unlink until after the task is done switching out")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20251104181114.489391-1-calvin@wbinvd.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix typo "handul" to "handful" and remove outdated limitation
stating only generic netlink is supported (we have netlink-raw).
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251105192908.686458-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for NVIDIA VRS (Voltage Regulator Specification) RTC device
driver. NVIDIA VRS is a Power Management IC (PMIC) that implements a
power sequencing solution with I2C interface. The device includes RTC
which provides functionality to get/set system time, retain system
time across boot, wake system from suspend and shutdown state.
Supported platforms:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA IGX Orin Development Kit
- NVIDIA Jetson Orin NX Developer Kit
- NVIDIA Jetson Orin Nano Developer Kit
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251007135738.487694-4-shgarg@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add device tree bindings for NVIDIA VRS (Voltage Regulator Specification)
RTC device. NVIDIA VRS is a Power Management IC (PMIC) that implements a
power sequencing solution with I2C interface. The device includes RTC
which provides functionality to get/set system time, retain system
time across boot, wake system from suspend and shutdown state.
Supported platforms:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA IGX Orin Development Kit
- NVIDIA Jetson Orin NX Developer Kit
- NVIDIA Jetson Orin Nano Developer Kit
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251007135738.487694-2-shgarg@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Wait until a PHY becomes ready in the probe callback by
using read_poll_timeout function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20251105133126.3221948-1-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__unregister_trace_fprobe() checks tf->tuser to put it when removing
tprobe. However, disable_trace_fprobe() does not use it and only calls
unregister_fprobe(). Thus it forgets to disable tracepoint_user.
If the trace_fprobe has tuser, put it for unregistering the tracepoint
callbacks when disabling tprobe correctly.
Link: https://lore.kernel.org/all/176244794466.155515.3971904050506100243.stgit@devnote2/
Fixes: 2867495dea ("tracing: tprobe-events: Register tracepoint when enable tprobe event")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Beau Belgrave <beaub@linux.microsoft.com>
