When moving extents, mext_check_validity() performs some basic file
system and file checks. However, some essential checks need to be
performed after acquiring the i_rwsem are still scattered in
mext_check_arguments(). Move those checks into mext_check_validity() and
make it executes entirely under the i_rwsem to make the checks clearer.
Furthermore, rename mext_check_arguments() to mext_check_adjust_range(),
as it only performs checks and length adjustments on the move extent
range. Finally, also change the print message for the non-existent file
check to be consistent with other unsupported checks.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-8-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, the basic validation checks during the move extent operation
are scattered across __ext4_ioctl() and ext4_move_extents(), which makes
the code somewhat disorganized. Introduce a new helper,
mext_check_validity(), to handle these checks. This change involves only
code relocation without any logical modifications.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-7-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Switch to using EXT4_B_TO_LBLK() to calculate the EOF position of the
origin and donor inodes, instead of using open-coded calculations.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-6-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When creating or querying mapping blocks using the ext4_map_blocks() and
ext4_map_{query|create}_blocks() helpers, also pass out the extent
sequence number of the block mapping info through the ext4_map_blocks
structure. This sequence number can later serve as a valid cookie within
iomap infrastructure and the move extents procedure.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-5-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When querying extents in the extent status tree, we should hold the
data_sem if we want to obtain the sequence number as a valid cookie
simultaneously. However, currently, ext4_map_blocks() calls
ext4_es_lookup_extent() without holding data_sem. Therefore, we should
acquire i_es_lock instead, which also ensures that the sequence cookie
and the extent remain consistent. Consequently, make
ext4_es_lookup_extent() to pass out the sequence number when necessary.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-4-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the iomap_write_iter(), the iomap buffered write frame does not hold
any locks between querying the inode extent mapping info and performing
page cache writes. As a result, the extent mapping can be changed due to
concurrent I/O in flight. Similarly, in the iomap_writepage_map(), the
write-back process faces a similar problem: concurrent changes can
invalidate the extent mapping before the I/O is submitted.
Therefore, both of these processes must recheck the mapping info after
acquiring the folio lock. To address this, similar to XFS, we propose
introducing an extent sequence number to serve as a validity cookie for
the extent. After commit 24b7a2331f ("ext4: clairfy the rules for
modifying extents"), we can ensure the extent information should always
be processed through the extent status tree, and the extent status tree
is always uptodate under i_rwsem or invalidate_lock or folio lock, so
it's safe to introduce this sequence number. The sequence number will be
increased whenever the extent status tree changes, preparing for the
buffered write iomap conversion.
Besides, this mechanism is also applicable for the moving extents case.
In move_extent_per_page(), it also needs to reacquire data_sem and check
the mapping info again under the folio lock.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-3-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The move extent operation should return -EOPNOTSUPP if any of the inodes
is a quota inode, rather than requiring both to be quota inodes.
Fixes: 02749a4c20 ("ext4: add ext4_is_quota_file()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Sometimes VMs will have some intermittent dmesg warnings that are
unrelated to vsock. Change the dmesg parsing to filter on strings
containing 'vsock' to avoid false positive failures that are unrelated
to vsock. The downside is that it is possible for some vsock related
warnings to not contain the substring 'vsock', so those will be missed.
Fixes: a4a65c6fe0 ("selftests/vsock: add initial vmtest.sh for vsock")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251105-vsock-vmtest-dmesg-fix-v2-1-1a042a14892c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, for beacon_stats, ath12k_mac_get_fw_stats() is called
for each started BSS on the specified hardware.
ath12k_mac_get_fw_stats() will wait for the fw_stats_done completion
after fetching the requested data from firmware. For the beacon_stats,
fw_stats_done completion will be set only when stats are received for
all BSSes. However, for other stats like vdev_stats or pdev_stats, there
is one request to the firmware for all enabled BSSes. Since beacon_stats
is fetched individually for all BSSes enabled in that pdev, waiting for
the completion event results in a timeout error when multiple BSSes are
enabled.
Avoid this by completing the fw_stats_done immediately after
updating the requested BSS's beacon stats in the list. Subsequently,
this list will be used to display the beacon stats for all enabled
BSSes in the requested pdev.
Additionally, remove 'num_bcn_recvd' from the ath12k_fw_stats struct
as it is no longer needed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 9fe4669ae9 ("wifi: ath12k: Request beacon stats from firmware")
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031-beacon_stats-v1-2-f52fce7b03ac@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, ath12k_fw_stats_reset() is called in
ath12k_mac_get_fw_stats() before fetching the required stats from the
firmware. However, ath12k_open_bcn_stats() requests firmware stats for
each enabled BSS individually. Since the firmware stats are reset before
fetching, only the last BSS's data is displayed.
Also, in ath12k_mac_op_get_txpower(), ath12k_mac_op_sta_statistics(), and
ath12k_mac_op_link_sta_statistics(), after getting the stats from the
firmware, the reset function is not called until the next firmware
stats are requested or while unloading the module. Hence, the stats buffer
will not be freed until one of the above sequences is executed. However,
in ath12k_open_vdev_stats(), ath12k_open_bcn_stats() and
ath12k_open_pdev_stats(), firmware stats are reset after copying the
necessary data in ath12k_wmi_fw_stats_dump().
This leads to inconsistent usage of ath12k_fw_stats_reset() for
freeing the firmware stats.
Avoid these discrepancies by making it the caller's responsibility to
free the stats buffer, thereby removing the need to free the stats buffer
in ath12k_mac_get_fw_stats() and ath12k_wmi_fw_stats_dump().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031-beacon_stats-v1-1-f52fce7b03ac@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently __ext4fs_dirhash() returns -1 (-EPERM) if fscrypt doesn't
have encryption key, which may confuse users. Make the error code here
consistent with existing error code.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Message-ID: <20251010095257.3008275-1-sunjunchao@bytedance.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Nikolay Aleksandrov says:
====================
net: bridge: fix two MST bugs
Patch 01 fixes a race condition that exists between expired fdb deletion
and port deletion when MST is enabled. Learning can happen after the
port's state has been changed to disabled which could lead to that
port's memory being used after it's been freed. The issue was reported
by syzbot, more information in patch 01. Patch 02 fixes an issue with
MST's static key which Ido spotted, we can have multiple bridges with MST
and a single bridge can erroneously disable it for all.
====================
Link: https://patch.msgid.link/20251105111919.1499702-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Fixes: ec7328b591 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: syzbot+dd280197f0f7ab3917be@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69088ffa.050a0220.29fc44.003d.GAE@google.com/
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following warning was seen when we try to connect using ssh to the device.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 104, name: dropbear
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
CPU: 0 UID: 0 PID: 104 Comm: dropbear Tainted: G W 6.18.0-rc2-00399-g6f1ab1b109b9-dirty #530 NONE
Tainted: [W]=WARN
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __might_resched+0x16c/0x2b0
__might_resched from __mutex_lock+0x64/0xd34
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from lan966x_stats_get+0x5c/0x558
lan966x_stats_get from dev_get_stats+0x40/0x43c
dev_get_stats from dev_seq_printf_stats+0x3c/0x184
dev_seq_printf_stats from dev_seq_show+0x10/0x30
dev_seq_show from seq_read_iter+0x350/0x4ec
seq_read_iter from seq_read+0xfc/0x194
seq_read from proc_reg_read+0xac/0x100
proc_reg_read from vfs_read+0xb0/0x2b0
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b11fa8 to 0xf0b11ff0)
1fa0: 00000001 00001000 00000008 be9048d8 00001000 00000001
1fc0: 00000001 00001000 00000008 00000003 be905920 0000001e 00000000 00000001
1fe0: 0005404c be9048c0 00018684 b6ec2cd8
It seems that we are using a mutex in a atomic context which is wrong.
Change the mutex with a spinlock.
Fixes: 12c2d0a5b8 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251105074955.1766792-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reporting tx completion using ieee80211_tx_status_xxx() family of
functions, the status part of the struct ieee80211_tx_info nested in the
skb is used to report things like transmit rates & retry count to mac80211
On the TX data path, this is correctly memset to 0 before calling
ieee80211_tx_status_ext(), but on the tx mgmt path this was not done.
This leads to mac80211 treating garbage values as valid transmit counters
(like tx retries for example) and accounting them as real statistics that
makes their way to userland via station dump.
The same issue was resolved in ath12k by commit 9903c0986f ("wifi:
ath12k: Add memset and update default rate value in wmi tx completion")
Tested-on: QCN9074 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251104083957.717825-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Liang reported an issue where setting a slave’s actor_port_prio to
predefined values such as 0, 255, or 65535 would cause a system crash.
The problem occurs because in bond_opt_parse(), when the provided value
matches a predefined table entry, the function returns that table entry,
which does not contain slave information. Later, in
bond_option_actor_port_prio_set(), calling bond_slave_get_rtnl() leads
to a NULL pointer dereference.
Since actor_port_prio is defined as a u16 and initialized to the default
value of 255 in ad_initialize_port(), there is no need for the
bond_actor_port_prio_tbl. Using the BOND_OPTFLAG_RAWVAL flag is sufficient.
Fixes: 6b6dc81ee7 ("bonding: add support for per-port LACP actor priority")
Reported-by: Liang Li <liali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251105072620.164841-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KSZ9477/KSZ9897 and LAN937X families of switches use a reserved multicast
address table for some specific forwarding with some multicast addresses,
like the one used in STP. The hardware assumes the host port is the last
port in KSZ9897 family and port 5 in LAN937X family. Most of the time
this assumption is correct but not in other cases like KSZ9477.
Originally the function just setups the first entry, but the others still
need update, especially for one common multicast address that is used by
PTP operation.
LAN937x also uses different register bits when accessing the reserved
table.
Fixes: 457c182af5 ("net: dsa: microchip: generic access to ksz9477 static and reserved table")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Łukasz Majewski <lukma@nabladev.com>
Link: https://patch.msgid.link/20251105033741.6455-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update default power1_cap to max limit for smu_v13_0_6 and smu_v13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only update bad page number in legacy eeprom write path.
v2: add null pointer check for con.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f5 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For a mode-1 reset done at the end of S3 on PSPv11 dGPUs, only check if
TOS is unloaded.
Fixes: 32f73741d6 ("drm/amdgpu: Wait for bootloader after PSPv11 reset")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4649
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW will manage RAS eeprom data by itself, add new interface to read
eeprom data via PMFW, we can read part of records by setting index.
v2: use IPID parse interface.
pa is not used and set it to a fixed value.
v3: optimize the null pointer check for IPID parse interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can call it in other blocks.
v2: add a new IPID parse interface for umc and we can
implement it for each ASIC.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit c760bcda83 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda83 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_device_health_check fails, amdgpu_ras_pre_reset
will not be called and therefore amdgpu_ras_post_reset
cannot be called either.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the condition to not wait for
the queue response for unmap, if the gpu is in reset.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unref bo after amdgpu_bo_reserve() failure as it has
called amdgpu_bo_ref() already
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
initialize max record count and record offset after table reset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get and check the pmfw eeprom feature bit to
decide if pmfw eeprom is supported
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add check function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
This chip must be described as none of the block protection information
are discoverable. This chip supports 4 bits plus the top/bottom
addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
add initialization function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adapt reset function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At present IDPF supports only 0x1452 and 0x145C as PF and VF device IDs
on our current generation hardware. Future hardware exposes a new set of
device IDs for each generation. To avoid adding a new device ID for each
generation and to make the driver forward and backward compatible,
make use of the IDPF PCI programming interface to load the driver.
Write and read the VF_ARQBAL mailbox register to find if the current
device is a PF or a VF.
PCI SIG allocated a new programming interface for the IDPF compliant
ethernet network controller devices. It can be found at:
https://members.pcisig.com/wg/PCI-SIG/document/20113
with the document titled as 'PCI Code and ID Assignment Revision 1.16'
or any latest revisions.
Tested this patch by doing a simple driver load/unload on Intel IPU E2000
hardware which supports 0x1452 and 0x145C device IDs and new hardware
which supports the IDPF PCI programming interface.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Marek Landowski <marek.landowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251103224631.595527-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CTC adapter throws CTC_EVENT_UC_RCRESET (Unit check remote reset event)
during initial handshake, if the peer is not ready yet. This causes the
ctcm driver to re-attempt the handshake.
As it is normal for the event to occur during initialization, use info
instead of warn level in kernel log and NOTICE instead of ERROR level
in s390 debug feature. Also reword the log message for clarity.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Link: https://patch.msgid.link/20251103101652.2349855-1-aswin@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SPEC_CTRL is an MSR, i.e. a 64-bit value, but the assembly code that loads
the guest's value assumes bits 63:32 are always zero. The bug is
_currently_ benign because neither KVM nor the kernel support setting any
of bits 63:32, but it's still a bug that needs to be fixed.
Note, the host's value is restored in C code and is unaffected.
Fixes: 07853adc29 ("KVM: VMX: Prevent RSB underflow before vmenter")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://patch.msgid.link/20250820100007.356761-1-ubizjak@gmail.com
[sean: call out that only the guest's value is affected]
Signed-off-by: Sean Christopherson <seanjc@google.com>
On an EPT violation, bit 7 of the exit qualification is set if the
guest linear-address is valid. The derived page fault error code
should not be checked for this bit.
Fixes: f300948251 ("KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid")
Cc: stable@vger.kernel.org
Signed-off-by: Sukrit Bhatnagar <Sukrit.Bhatnagar@sony.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://patch.msgid.link/20251106052853.3071088-1-Sukrit.Bhatnagar@sony.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
MAX77620 is most likely always a single device on the board, however
nothing stops board designers to have two of them, thus same device
driver could probe twice. Or user could manually try to probing second
time.
Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
probe in 'irq_drv_data' member a pointer to per-probe state
container ('struct max77620_chip'). devm_regmap_add_irq_chip() does not
make a copy of 'struct regmap_irq_chip' but store the pointer.
Second probe - either successful or failure - would overwrite the
'irq_drv_data' from previous device probe, so interrupts would be
executed in a wrong context.
Cc: stable@vger.kernel.org
Fixes: 3df140d11c ("mfd: max77620: Mask/unmask interrupt before/after servicing it")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023101939.67991-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Mark 'interrupts', 'interrupt-controller', and 'interrupt-cells' as
optional in the binding schema.
The 'interrupts' property should not be required for the TPS65910 PMIC.
On the AM335x-ICEV2 SoC, there is no hardware connection from the PMIC_INT
pin to the SoC. Without the 'interrupts' property defined, the PMIC cannot
forward interrupts.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021182716.292652-1-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
