Add handling for the HFI_PROP_OPB_ENABLE property, which allows enabling
or disabling split mode in the firmware. When HFI_PROP_OPB_ENABLE is set
to true, the firmware activates split mode for output picture buffers
(OPB). The OPB format is determined by the HFI_PROP_COLOR_FORMAT
property, supporting NV12 or QC08C formats.
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver has never supported anything but OF probing so drop the
unused platform module aliases.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The encoder and decoder platform devices are registered by the venus
driver as children of the venus device, but even if someone were to mess
this up no amount of probe deferring is going to conjure up a parent.
Relatedly, the venus driver sets its driver data before registering the
child devices and if this ever breaks we want to learn about it by
failing probe.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
kernel-doc populated the below warning for the non
static function "snd_ac97_reset".
"Warning: ./sound/ac97_bus.c:56 No description found
for return value of 'snd_ac97_reset'".
Added the return values as per the kernel-doc format.
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251105105229.112172-2-hariconscious@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently request_irq_by_index() returns
Result<impl PinInit<irq::Registration<T>, Error> + 'a>
which may carry an error in the Result or the initializer; the same is
true for the other IRQ methods.
Use pin_init::pin_init_scope() to get rid of this redundancy.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103203053.2348783-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently request_irq() returns
Result<impl PinInit<irq::Registration<T>, Error> + 'a>
which may carry an error in the Result or the initializer; the same is
true for request_threaded_irq().
Use pin_init::pin_init_scope() to get rid of this redundancy.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103203053.2348783-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The openwrt has 3 status leds at the front:
* red: Used as failsafe led by openwrt
* white: Used as boot led by openwrt
* green: Used as running/upgrade led by openwrt
On the back each RJ45 jack has the typical amber/green leds. For the WAN
jack this is hardware controlled by the phy, for LAN these are under
software control and enabled by this patch.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The openwrt one has a SPI NOR flash which from factory is used for:
* Recovery system
* WiFi eeprom data
* ethernet Mac addresses
Describe this following the same partitions as the openwrt configuration
uses.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add MMC overlays for BPI-R4 Pro.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add overlays to switch between key-m and key-e slots.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add devicetree for Bpi-R4-Pro.
BananaPi R4 Pro is a MT7988A based board which exists in 2 different
hardware versions:
- 4E: 4 GB RAM and using internal 2.5G Phy for WAN-Combo
- 8X: 8 GB RAM and 2x Aeonsemi AS21010P 10G phys
common parts:
- MediaTek MT7988A Quad-core Arm Corex-A73,1.8GHz processor
- 8GB eMMC flash
- 256MB SPI-NAND Flash
- Micro SD card slot
- 1x 10G SFP+ WAN
- 1x 10G SFP+ LAN
- 4x 2.5G RJ45 LAN (MxL86252C)
- 1x 1G RJ45 LAN (MT7988 internal switch)
- 2x miniPCIe slots with PCIe3.0 2lane interface for Wi-Fi NIC
- 2x M.2 M-KEY slots with PCIe3.0 1lane interface for NVME SSD
- 3x M.2 B-KEY slots with USB3.2 for 5G Module (PCIe shared with key-m)
- 1x USB3.2 slot
- 1x USB2.0 slot
- 1x USB TypeC Debug Console
- 2x13 PIN Header for expanding application
https://docs.banana-pi.org/en/BPI-R4_Pro/BananaPi_BPI-R4_Pro
The PCIe is per default in key-m state and can be changed to key-b with
the pcie-overlays.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The internal 2.5G phy of mt7988 is only used by some specific board
variants.
Disable it by default and enable it where needed.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix all kernel-doc warnings in include/uapi/drm/panfrost_drm.h.
This mostly means modifying existing comments to conform to
kernel-doc format, but there also some additions of missing
kernel-doc comments and changing non-kernel-doc comments to
use "/*" to begin them.
Warning: panfrost_drm.h:83 struct member 'jc' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'in_syncs' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'in_sync_count' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'out_sync' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'bo_handles' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'bo_handle_count' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'requirements' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'jm_ctx_handle' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:83 struct member 'pad' not described
in 'drm_panfrost_submit'
Warning: panfrost_drm.h:116 Incorrect use of kernel-doc format:
* Returned offset for the BO in the GPU address space. This offset
Warning: panfrost_drm.h:124 struct member 'size' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'flags' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'handle' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'pad' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:124 struct member 'nonzero' not described
in 'drm_panfrost_create_bo'
Warning: panfrost_drm.h:143 struct member 'handle' not described
in 'drm_panfrost_mmap_bo'
Warning: panfrost_drm.h:143 struct member 'flags' not described
in 'drm_panfrost_mmap_bo'
Warning: panfrost_drm.h:143 struct member 'offset' not described
in 'drm_panfrost_mmap_bo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251031054152.1406764-1-rdunlap@infradead.org
kmemleak occasionally reports leaking xfs_busy_extents structure
from xfs_scrub calls after running xfs/528 (but attributed to following
tests), which seems to be caused by not freeing the xfs_busy_extents
structure when tr.queued is 0 and xfs_trim_rtgroup_extents breaks out
of the main loop. Free the structure in this case.
Fixes: a3315d1130 ("xfs: use rtgroup busy extent list for FITRIM")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Correct the kernel-doc comments format to avoid around 35 kernel-doc
warnings:
- use struct keyword to introduce struct kernel-doc comments
- use correct variable name for some struct members
- use correct function name in comments for some functions
- fix spelling in a few comments
- use a ':' instead of '-' to separate struct members from their
descriptions
- add a function name heading for rvt_div_mtu()
This leaves one struct member that is not described:
rdmavt_qp.h:206: warning: Function parameter or struct member 'wq'
not described in 'rvt_krwq'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251105045127.106822-1-rdunlap@infradead.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
CC: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251101163121.78400-6-marco.crivellari@suse.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
CC: Yishai Hadas <yishaih@nvidia.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251101163121.78400-5-marco.crivellari@suse.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
CC: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251101163121.78400-4-marco.crivellari@suse.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251101163121.78400-3-marco.crivellari@suse.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251101163121.78400-2-marco.crivellari@suse.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Need to take an SRQ lock in poll_cq before moving SRQ tail.
Signed-off-by: Jay Bhat <jay.bhat@intel.com>
Reviewed-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20251031021726.1003-7-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In review of a followup work, Harry noticed a potential infinite loop.
Upon closed inspection, it already exists for kmalloc_nolock() on a
cache with debugging enabled, since commit af92793e52 ("slab:
Introduce kmalloc_nolock() and kfree_nolock().")
When alloc_single_from_new_slab() fails to trylock node list_lock, we
keep retrying to get partial slab or allocate a new slab. If we indeed
interrupted somebody holding the list_lock, the trylock fill fail
deterministically and we end up allocating and defer-freeing slabs
indefinitely with no progress.
To fix it, fail the allocation if spinning is not allowed. This is
acceptable in the restricted context of kmalloc_nolock(), especially
with debugging enabled.
Reported-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/all/aQLqZjjq1SPD3Fml@hyeyoo/
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20251103-fix-nolock-loop-v1-1-6e2b3e82b9da@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
TX wait skbs need to be completed when they are done. PCIe part does this
inside rtw89_pci_tx_status() during RPP processing. Other HCIs use a
mechanism based on C2H firmware messages.
Store TX wait skbs inside TX report queue so that it'll be possible to
identify completed items inside the C2H handler. Try to do this as
similar to PCIe path as possible. When the corresponding TX wait skb is
found inside TX report queue, unlink it from there and call
rtw89_core_tx_wait_complete() to mark the completion.
If the callee waiting for the completion has already timed out, the TX
wait skb is placed into TX wait list (like PCIe part does).
It's important that during HCI reset all pending TX wait frames should be
completed inside hci.ops->reset method before calling
rtw89_tx_wait_list_clear().
Found by Linux Verification Center (linuxtesting.org).
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-11-pchelkin@ispras.ru
In order to provide TX reports for the management queue rtw89 should
configure the firmware. Do this with SET_CMC_TBL_MGQ_RPT_EN() for the
WiFi6 chips and with CCTLINFO_G7_W0_MGQ_RPT_EN flag for the WiFi7 ones.
Suggested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-10-pchelkin@ispras.ru
Frames flagged with IEEE80211_TX_CTL_REQ_TX_STATUS mean the driver has to
report to mac80211 stack whether AP sent ACK for the null frame/probe
request or not. It's not implemented in USB part of the driver yet.
PCIe HCI has its own way of getting TX status incorporated into RPP
feature, and it's always enabled there. Other HCIs need a different
scheme based on processing C2H messages.
Thus define a .tx_rpt_enabled flag indicating which HCIs need to enable a
TX report feature. Currently it is USB only.
Toggle a bit in the TX descriptor and place flagged skbs in a fix-sized
queue to wait for a message from the firmware. Firmware maintains a 4-bit
sequence number for required frames hence the queue can contain just 16
elements simultaneously. That's enough for normal driver / firmware
communication. If the firmware crashes for any reason and doesn't provide
TX reports in time, driver will handle this and report the obsolete frames
as dropped.
rtw89 also has a new feature providing a TX report for each transmission
attempt. Ignore a failed TX status reported by the firmware until retry
limit is reached or successful status appears. When there is no success
and the retry limit is reached, report the frame up to the wireless stack
as failed eventually.
HCI reset should stop all pending TX activity so forcefully flush the
queue there.
Found by Linux Verification Center (linuxtesting.org).
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-9-pchelkin@ispras.ru
During HCI reset all pending TX URBs should be canceled. Use anchor to
keep track of them and have an ability to cancel them synchronously.
Note however that canceling RX URBs can't be done here in
rtw89_usb_ops_reset() as it breaks driver initialization.
Found by Linux Verification Center (linuxtesting.org).
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-8-pchelkin@ispras.ru
TX type FWCMD is used to download firmware and send H2C commands, and
it only fill few fields of TX description, such as desc_info->pkt_size.
Therefore, early return the TX type FWCMD.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20251104135720.321110-7-pchelkin@ispras.ru
strcpy() is deprecated; use the safer strscpy() instead.
The destination buffer is only zero-initialized for the first iteration
and since strscpy() guarantees its NUL termination anyway, remove
zero-initializing 'eng_type'.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use struct_size(), which provides additional compile-time checks for
structures with flexible array members (e.g., __must_be_array()), to
calculate the allocation size for a new 'deflate_stream'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PCI device 0x115A is similar to pspv5, except it doesn't have platform
access mailbox support.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The previous version check made it difficult to support newer major
versions (e.g., v6.0) without adding extra checks/macros. Update the
logic to only reject v5.0 and allow future versions without additional
changes.
Signed-off-by: Gaurav Kashyap <gaurav.kashyap@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the crypto engine on the kaanapali platform.
Signed-off-by: Gaurav Kashyap <gaurav.kashyap@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document kaanapali compatible for the True Random Number Generator.
Signed-off-by: Gaurav Kashyap <gaurav.kashyap@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix cocci warnings to use %pe to print PTR_ERR().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202510231229.Z6TduqZy-lkp@intel.com/
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rtw89 has several ways of handling TX status report events. The first one
is based on RPP feature which is used by PCIe HCI. The other one depends
on firmware sending a corresponding C2H message, quite similar to what
rtw88 has.
Toggle a bit in the TX descriptor to indicate to the firmware that TX
report for the frame is expected. This will allow handling TX wait skbs
and the ones flagged with IEEE80211_TX_CTL_REQ_TX_STATUS correctly.
Do the bulk of the patch according to the vendor driver for RTL8851BU.
However, there are slight differences in C2H message format between
different types of chips. RTL885xB ones follow format V0. RTL8852C has
format V1, and RTL8922AU has format V2.
Found by Linux Verification Center (linuxtesting.org).
Suggested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-6-pchelkin@ispras.ru
The qm_get_qos_value() function calls bus_find_device_by_name() which
increases the device reference count, but fails to call put_device()
to balance the reference count and lead to a device reference leak.
Add put_device() calls in both the error path and success path to
properly balance the reference count.
Found via static analysis.
Fixes: 22d7a6c39c ("crypto: hisilicon/qm - add pci bdf number check")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pass TX status value directly into rtw89_core_tx_wait_complete(). This
will make it a bit in sync with further patches and will give flexibility
in future work. Also use scope based RCU locking which simplifies the
code of the function.
Found by Linux Verification Center (linuxtesting.org).
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-5-pchelkin@ispras.ru
rtw89_usb_ops_tx_kick_off() may need to release skb if a failure occurs.
It operates mainly on skbs coming from the core wireless stack and the
ones containing firmware commands.
Use ieee80211_free_txskb() for the former case.
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-4-pchelkin@ispras.ru
When there is an attempt to write data and RTW89_FLAG_UNPLUGGED is set,
this means device is disconnected and no urb is submitted. Return
appropriate error code to the caller to properly free the allocated
resources.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2135c28be6 ("wifi: rtw89: Add usb.{c,h}")
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-3-pchelkin@ispras.ru
Allow adding rx_skb to rx_free_queue for later reuse on the common error
handling path, otherwise free it.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2135c28be6 ("wifi: rtw89: Add usb.{c,h}")
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251104135720.321110-2-pchelkin@ispras.ru
Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-j721s2-mcu-wakeup.dtsi" and enable it in the board
files:
a) k3-am68-phyboard-izar.dts
b) k3-am68-sk-base-board.dts
c) k3-j721s2-common-proc-board.dts
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251015111344.3639415-6-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-j721e-mcu-wakeup.dtsi" and enable it in the board
files:
a) k3-j721e-beagleboneai64.dts
b) k3-j721e-common-proc-board.dts
c) k3-j721e-sk.dts
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251015111344.3639415-5-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-j7200-mcu-wakeup.dtsi" and enable it in the board file
"k3-j7200-common-proc-board.dts".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251015111344.3639415-4-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-am65-mcu.dtsi" and enable it in the board file
"k3-am654-base-board.dts". Also, now that "mcu_cpsw" is disabled in the
SoC file, disabling it in "k3-am65-iot2050-common.dtsi" is no longer
required. Hence, remove the section corresponding to this change.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251015111344.3639415-3-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "cpsw3g" node
in the SoC file "k3-am62-main.dtsi" and enable it in the board (or board
include) files:
a) k3-am62-lp-sk.dts
b) k3-am62-phycore-som.dtsi
c) k3-am625-beagleplay.dts
d) k3-am625-sk-common.dtsi
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251015111344.3639415-2-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The CANUART pins of mcu_mcan0, mcu_mcan1, mcu_uart0 and wkup_uart0 are
powered during Partial-IO and I/O Only + DDR and are capable of waking
up the system in these states. Specify the states in which these units
can do a wakeup on this board.
Note that the UARTs are not capable of wakeup in Partial-IO because of
of a UART mux on the board not being powered during Partial-IO.
Add pincontrol definitions for mcu_mcan0 and mcu_mcan1 for wakeup from
Partial-IO. Add these as wakeup pinctrl entries for both devices.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251103-topic-am62-dt-partialio-v6-15-v5-6-b8d9ff5f2742@baylibre.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The CANUART pins of mcu_mcan0, mcu_mcan1, mcu_uart0 and wkup_uart0 are
powered during Partial-IO and I/O Only + DDR and are capable of waking
up the system in these states. Specify the states in which these units
can do a wakeup on this board.
Note that the UARTs are not capable of wakeup in Partial-IO because of
of a UART mux on the board not being powered during Partial-IO.
Add pincontrol definitions for mcu_mcan0 and mcu_mcan1 for wakeup from
Partial-IO. Add these as wakeup pinctrl entries for both devices.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Link: https://patch.msgid.link/20251103-topic-am62-dt-partialio-v6-15-v5-5-b8d9ff5f2742@baylibre.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
