The driver implemented SIOCSHWTSTAMP ioctl command only, but it also
stores configuration in private data, so it's possible to report it back
to users. Implement both ndo_hwtstamp_set and ndo_hwtstamp_get
callbacks.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251103150952.3538205-6-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver implemented SIOCSHWTSTAMP ioctl command only. But it stores
timestamping configuration, so it is possible to report it to users.
Implement both ndo_hwtstamp_set and ndo_hwtstamp_get callbacks. After
this the ndo_eth_ioctl effectively becomes phy_do_ioctl - adjust
callback accordingly.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251103150952.3538205-5-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver implemented SIOCSHWTSTAMP ioctl command only, but there is a
way to get configuration back. Implement both ndo_hwtstamp_set and
ndo_hwtstamp_set callbacks.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251103150952.3538205-4-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver implemented SIOCSHWTSTAMP ioctl command only, but there is a
way to get configured status. Implement both ndo_hwtstamp_set and
ndo_hwtstamp_get callbacks.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251103150952.3538205-3-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit bd61848900 ("net: devmem: Implement TX path") declared this
but never implemented it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20251103072046.1670574-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Bug fixes
Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver
coredump feature recently added in 6.13. Patch #1 adds the necessary
call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes
a possible null pointer derefernce when using early versions of the FW
with this feature. Patch #4 adds the coredump header information
unconditionally to make it more robust.
Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5
eliminates a dmesg warning when doing devlink reload.
====================
Link: https://patch.msgid.link/20251104005700.542174-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing code calls bnxt_cancel_reservations() after
bnxt_hwrm_func_drv_unrgtr() in bnxt_dl_reload_down().
bnxt_cancel_reservations() calls the FW and it will always fail since
the driver has already unregistered, triggering this warning:
bnxt_en 0000:0a:00.0 ens2np0: resc_qcaps failed
Fix it by calling bnxt_clear_reservations() which will skip the
unnecessary FW call since we have unregistered.
Fixes: 228ea8c187 ("bnxt_en: implement devlink dev reload driver_reinit")
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shantiprasad Shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While populating firmware host logging segments for the coredump, it is
possible for the FW command that flushes the segment to fail. When that
happens, the existing code will not update the max entry and entry size
in the segment header and this causes software that decodes the coredump
to skip the segment.
The segment most likely has already collected some DMA data, so always
update these 2 segment fields in the header to allow the decoder to
decode any data in the segment.
Fixes: 3c2179e663 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER
for FW trace data type that has not been initialized. This will result
in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a
valid magic_byte pointer before proceeding.
Fixes: 84fcd9449f ("bnxt_en: Manage the FW trace context memory")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Gautam R A <gautam-r.a@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_ptp_init(), when ptp_clock_register() fails, the driver is
not freeing the memory allocated for ptp_info->pin_config. Fix it
to unconditionally free ptp_info->pin_config in bnxt_ptp_free().
Fixes: caf3eedbcd ("bnxt_en: 1PPS support for 5750X family chips")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netif_close() call in bnxt_shutdown() only stops packet DMA. There
may be FW DMA for trace logging (recently added) that will continue. If
we kexec to a new kernel, the DMA will corrupt memory in the new kernel.
Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW.
This will stop the FW DMA. In case the call fails, call pcie_flr() to
reset the function and stop the DMA.
Fixes: 24d694aec1 ("bnxt_en: Allocate backing store memory for FW trace logs")
Reported-by: Jakub Kicinski <kicinski@meta.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthieu Baerts says:
====================
mptcp: pm: in-kernel: fullmesh endp nb + bind cases
Here is a small optimisation for the in-kernel PM, joined by a small
behavioural change to avoid confusions, and followed by a few more
tests.
- Patch 1: record fullmesh endpoints numbers, not to iterate over all
endpoints to check if one is marked as fullmesh.
- Patch 2: when at least one endpoint is marked as fullmesh, only use
these endpoints when reacting to an ADD_ADDR, even if there are no
endpoints for this IP family: this is less confusing.
- Patch 3: reduce duplicated code to prepare the next patch.
- Patch 4: extra "bind" cases: the listen socket restrict the bind to
one IP address, not allowing MP_JOIN to extra IP addresses, except if
another listening socket accepts them.
====================
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-0-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By design, an MPTCP connection will not accept extra subflows where no
MPTCP listening sockets can accept such requests.
In other words, it means that if the 'server' listens on a specific
address / device, it cannot accept MP_JOIN sent to a different address /
device. Except if there is another MPTCP listening socket accepting
them.
This is what the new tests are validating:
- Forcing a bind on the main v4/v6 address, and checking that MP_JOIN
to announced addresses are not accepted.
- Also forcing a bind on the main v4/v6 address, but before, another
listening socket is created to accept additional subflows. Note that
'mptcpize run nc -l' -- or something else only doing: socket(MPTCP),
bind(<IP>), listen(0) -- would be enough, but here mptcp_connect is
reused not to depend on another tool just for that.
- Same as the previous one, but using v6 link-local addresses: this is
a bit particular because it is required to specify the outgoing
network interface when connecting to a link-local address announced
by the other peer. When using the routing rules, this doesn't work
(the outgoing interface is not known) ; but it does work with a
'laminar' endpoint having a specified interface.
Note that extra small modifications are needed for these tests to work:
- mptcp_connect's check_getpeername_connect() check should strip the
specified interface when comparing addresses.
- With IPv6 link-local addresses, it is required to wait for them to
be ready (no longer in 'tentative' mode) before using them, otherwise
the bind() will not be allowed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/591
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-4-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same extra long commands are present twice, with small differences:
the variable for the stdin file is different.
Use new dedicated variables in one command to avoid this code
duplication.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-3-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our documentation is saying that the in-kernel PM is only using fullmesh
endpoints to establish subflows to announced addresses when at least one
endpoint has a fullmesh flag. But this was not totally correct: only
fullmesh endpoints were used if at least one endpoint *from the same
address family as the received ADD_ADDR* has the fullmesh flag.
This is confusing, and it seems clearer not to have differences
depending on the address family.
So, now, when at least one MPTCP endpoint has a fullmesh flag, the local
addresses are picked from all fullmesh endpoints, which might be 0 if
there are no endpoints for the correct address family.
One selftest needs to be adapted for this behaviour change.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-2-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of iterating over all endpoints, under RCU read lock, just to
check if one of them as the fullmesh flag, we can keep a counter of
fullmesh endpoint, similar to what is done with the other flags.
This counter is now checked, before iterating over all endpoints.
Similar to the other counters, this new one is also exposed. A userspace
app can then know when it is being used in a fullmesh mode, with
potentially (too) many subflows.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-1-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40f ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5e: Reduce interface downtime on configuration change
This series significantly reduces the interface downtime while swapping
channels during a configuration change, on capable devices.
Here we remove an old requirement on operations ordering that became
obsolete on recent capable devices. This helps cutting the downtime by a
factor of magnitude, ~80% in our example.
Perf numbers:
Measured the number of dropped packets in a simple ping flood test,
during a configuration change operation, that switches the number of
channels from 247 to 248.
Before: 71 packets lost
After: 15 packets lost, ~80% saving.
====================
Link: https://patch.msgid.link/1761831159-1013140-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cap bit tis_tir_td_order=1 indicates that an old firmware requirement /
limitation no longer exists. When unset, the latency of several firmware
commands significantly increases with the presence of high number of
co-existing channels (both old and new sets). Hence, we used to close
unneeded old channels before invoking those firmware commands.
Today, on capable devices, this is no longer the case. Minimize the
interface down time by deferring the old channels closure, after the
activation of the new ones.
Perf numbers:
Measured the number of dropped packets in a simple ping flood test,
during a configuration change operation, that switches the number of
channels from 247 to 248.
Before: 71 packets lost
After: 15 packets lost, ~80% saving.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1761831159-1013140-8-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let the caller function mlx5e_safe_switch_params() maintain a copy
of the old channels, and pass it to mlx5e_switch_priv_channels().
This is in preparation for the next patch.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1761831159-1013140-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On old firmware, (tis_tir_td_order=0), TIR of a transport domain should
either be created after all SQs of the same domain, or TIR.self_lb_en
should be reapplied using MODIFY_TIR, for self loopback filtering to
function correctly.
This is not necessary anymnore on new FW (tis_tir_td_order=1), thus
there's no need for calling modify_tir operations after creating a new
set of SQs to maintain the self loopback prevention functional.
Skip these operations.
This saves O(max_num_channels) MODIFY_TIR firmware commands in
operations like interface up or channels configuration change.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1761831159-1013140-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In IPoIB, the self loopback prevention configuration apply in activation
stage has two roles: fulfill a firmware requirement for old firmware
(tis_tir_td_order=0), and update the proper configuration as it was not
set in init.
Here we set the proper configuration in init, to allow skipping the
modify_tirs commands on new firmware in a downstream patch.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1761831159-1013140-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Until now, IPoIB was creating TIRs without setting self loopback
prevention, then modifying them in activation stage.
This is a preparation patch, that will be used by IPoIB to init TIRs
properly without the need for following calls of modify_tir.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1761831159-1013140-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the TIR API and use it in mlx5e_modify_tirs_lb() instead of the
explicit modify_tir code.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1761831159-1013140-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The re-application of self loopback prevention attributes in TIRs is
necessary in old firmwares (where tis_tir_td_order cap is cleared) after
recreation of SQs.
However, this is not needed in new firmware with tis_tir_td_order=1.
As a preparation patch, enhance the function structures to differentiate
between an explicit loopback prevention configuration apply, and the
re-apply operation required by old firmware.
Loopback selftests should now call mlx5e_modify_tirs_lb() directly, as
their use case is not related to the firmware limitation.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1761831159-1013140-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original comments contained spelling errors and incomplete logical
descriptions, which could easily lead to misunderstandings of the code
logic. The specific modifications are as follows:
Correct the spelling error by changing "inut max" to "but not exceed the
maximum limit";
Add the note "If the user has not specified a value, the default maximum
limit is 8" to clarify the default value logic;
Improve the coherence of the statement to make the queue quantity rules
clearer.
After the modification, the comments can accurately reflect the code
behavior of "taking the smaller value between the number of CPUs and the
default maximum limit of 8 for the number of queues", enhancing code
maintainability.
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20251103032212.2462-1-chuguangqing@inspur.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the spelling error of "separate".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20251103074305.4727-1-chuguangqing@inspur.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some older (yet supported) versions of clippy throw a false positive
warning for missing a safety comment when the safety comment is on a
multiline statement.
warning: unsafe block missing a safety comment
--> rust/kernel/auxiliary.rs:351:22
|
351 | Self(unsafe { NonNull::new_unchecked(adev) }),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider adding a safety comment on the preceding line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#undocumented_unsafe_blocks
= note: requested on the command line with `-W clippy::undocumented-unsafe-blocks`
warning: 1 warning emitted
Fix this by placing the safety comment right on top of the same line
introducing the unsafe block.
Fixes: e4e679c860 ("rust: auxiliary: unregister on parent device unbind")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251103203932.2361660-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Russell King says:
====================
net: stmmac: multi-interface stmmac
This series adds a callback for platform glue to configure the stmmac
core interface mode depending on the PHY interface mode that is being
used. This is currently only called just before the dwmac core is reset
since these signals are latched on reset.
Included in this series are changes to s32 to move its PHY_INTF_SEL_x
definitions out of the way of the dwmac core's signals which has more
entitlement to use this name. We convert dwmac-imx as an example.
Including other platform glue would make this series excessively large,
but once this core code is merged, the individual platform glue updates
can be posted one after another as they will be independent of each
other.
It is hoped that this callback can be used in future to reconfigure the
dwmac core when the interface mode changes to support PHYs that change
their interface mode, but we're nowhere near being able to do that yet.
====================
Link: https://patch.msgid.link/aQiWzyrXU_2hGJ4j@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than placing the phy_intf_sel() setup in the ->init() method,
move it to the new ->set_phy_intf_sel() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt5C-0000000ChpR-2kAB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the imx_priv_data instead of the plat_stmmacenet_data into the
set_intf_mode() SoC specific methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt57-0000000ChpL-25kS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify the set_intf_mode() implementations, testing the phy_intf_sel
value rather than the PHY interface mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt52-0000000ChpG-1bsd@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i.MX implementations other than IMX8DXL involve setting the dwmac core
phy_intf_sel input. Use stmmac_get_phy_intf_sel() to decode the PHY
interface mode to the phy_intf_sel value, validating the result, and
passing it into the implementation specific .set_intf_mode() method
rather than each .set_intf_mode() method doing this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt4x-0000000ChpA-1Edr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use FIELD_PREP()/FIELD_GET() in the functions to construct the PHY
interface selection bitfield or to extract its value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt4s-0000000Chp4-0kwf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert dwmac-imx to use the PHY_INTF_SEL_xxx definitions rather than
constants via:
- ensuring that the prefix for the MASK and value definitions is the
same.
- using FIELD_PREP() to shift the PHY_INTF_SEL_xxx definition to the
appropriate bitfield.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt4n-0000000Choy-0IeG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When dwmac is synthesised with support for multiple PHY interfaces, the
core provides phy_intf_sel inputs, sampled on reset, to configure the
PHY facing interface. Use stmmac_get_phy_intf_sel() in core code to
determine the dwmac phy_intf_sel input value, and provide a new
platform method called with this value just before we issue a soft
reset to the dwmac core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt4h-0000000Chos-3wxX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a function to translate the PHY interface mode to the
phy_intf_sel pin configuration for dwmac1000 and dwmac4 cores that
support multiple interfaces. We currently handle MII, GMII, RGMII,
SGMII, RMII and REVMII, but not TBI, RTBI nor SMII as drivers do not
appear to use these three and the driver doesn't currently support
these.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt4c-0000000Choe-3SII@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add definitions for the active PHY interface found in DMA hardware
feature register 0, and also used to configure the core in multi-
interface designs via phy_intf_sel.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vFt4X-0000000ChoY-30p9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
S32's PHY_INTF_SEL_x definitions conflict with those for the dwmac
cores as they use a different bitmapping. Add a S32 prefix so that
they are unique.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/E1vFt4S-0000000ChoS-2Ahi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
imx_dwmac_set_clk_tx_rate() is passed the interface mode from phylink
which will be the same as plat_dat->phy_interface. Use the passed-in
interface mode rather than plat_dat->phy_interface.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vFt4N-0000000ChoM-1llp@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
deliver_skb() should not be inlined as is it not called
in the fast path.
Add unlikely() clauses giving hints to the compiler about this fact.
Before this patch:
size net/core/dev.o
text data bss dec hex filename
121794 13330 176 135300 21084 net/core/dev.o
__netif_receive_skb_core() size on x86_64 : 4080 bytes.
After:
size net/core/dev.o
text data bss dec hex filenamee
120330 13338 176 133844 20ad4 net/core/dev.o
__netif_receive_skb_core() size on x86_64 : 2781 bytes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251103165256.1712169-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gathering interface statistics can be a relatively expensive operation
on certain systems as it requires iterating over all the cpus.
RTEXT_FILTER_SKIP_STATS was first introduced [1] to skip AF_INET6
statistics from interface dumps and it was then extended [2] to
also exclude IFLA_VF_INFO.
The semantics of the flag does not seem to be limited to AF_INET
or VF statistics and having a way to query the interface status
(e.g: carrier, address) without retrieving its statistics seems
reasonable. So this patch extends the use RTEXT_FILTER_SKIP_STATS
to also affect IFLA_STATS.
[1] https://lore.kernel.org/all/20150911204848.GC9687@oracle.com/
[2] https://lore.kernel.org/all/20230611105108.122586-1-gal@nvidia.com/
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20251103154006.1189707-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If cros_ec_keyb_register_matrix() isn't called (due to
`buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains
NULL. An invalid memory access is observed in cros_ec_keyb_process()
when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work()
in such case.
Unable to handle kernel read from unreadable memory at virtual address 0000000000000028
...
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
input_event
cros_ec_keyb_work
blocking_notifier_call_chain
ec_irq_thread
It's still unknown about why the kernel receives such malformed event,
in any cases, the kernel shouldn't access `ckdev->idev` and friends if
the driver doesn't intend to initialize them.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend the rust_debugfs_scoped sample to demonstrate how to export a
large binary object through a ScopedDir.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
