When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 2ada9cb1df)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Added the Fixes tag while cherry-picking to fixes]
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
See 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
for cause of changes.
[ dj: Add reference to commit that initiated the change. ]
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251030163839.307752-1-marco.crivellari@suse.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
devm_cxl_port_enumerate_dports() is not longer used after below commit
commit 4f06d81e7c ("cxl: Defer dport allocation for switch ports")
Delete it and the relevant interface implemented in cxl_test.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The node/zone quirk section of the cxl documentation is incorrect.
The actual reason for fallback allocation misbehavior in the
described configuration is due to a kswapd/reclaim thrashing scenario
fixed by the linked patch. Remove this section.
Link: https://lore.kernel.org/linux-mm/20250919162134.1098208-1-hannes@cmpxchg.org/
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
To pick the changes in:
fe2bf6234e ("KVM: guest_memfd: Add INIT_SHARED flag, reject user page faults if not set")
d2042d8f96 ("KVM: Rework KVM_CAP_GUEST_MEMFD_MMAP into KVM_CAP_GUEST_MEMFD_FLAGS")
3d3a04fad2 ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the 'perf trace' ioctl syscall argument beautifiers.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several users (including IGT kms_getfb tests) allocate DUMB buffers for
YUV data. Commit 538fa012cb ("drm/msm: Compute dumb-buffer sizes with
drm_mode_size_dumb()") broke that usecase, since in those cases
drm_driver_color_mode_format() returns DRM_FORMAT_INVALID.
Handle the YUV usecase, aligning to 32-bit pixels.
Fixes: 538fa012cb ("drm/msm: Compute dumb-buffer sizes with drm_mode_size_dumb()")
Closes: https://lore.kernel.org/all/vptw5tquup34e3jen62znnw26qe76f3pys4lpsal5g3czwev6y@2q724ibos7by/
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/685197/
Message-ID: <20251103-drm-msm-fix-nv12-v2-1-75103b64576e@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add the Glymur DPU compatible to clients compatible list, as it needs
the workarounds.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
There is a better way to handle the problem IORING_REGISTER_ZCRX_REFILL
solves. The uapi can also be slightly adjusted to accommodate future
extensions. Remove the feature for now, it'll be reworked for the next
release.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As part of a recent move go exclusively listing git.kernel.org trees
for the block and io_uring development, the "BLOCK LAYER" entry wasn't
updated as it already used git.kernel.org. However, outside of just
moving from git.kernel.dk to git.kernel.org, the "block" part of the
trees was also dropped, as the tree serves both block and io_uring
development trees.
Fix up the "BLOCK LAYER" entry so they all use the same tree.
Reported-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Qualcomm Kaanapali and Glymur SoCs include apps smmu that implements
arm,mmu-500, which is used to translate device-visible virtual addresses
to physical addresses. Add compatible for these items.
Co-developed-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Refactor ublk_thread to be a thread-local variable instead of storing
it in ublk_dev:
- Remove pthread_t thread field from struct ublk_thread and move it to
struct ublk_thread_info
- Remove struct ublk_thread array from struct ublk_dev, reducing memory
footprint
- Define struct ublk_thread as local variable in __ublk_io_handler_fn()
instead of accessing it from dev->threads[]
- Extract main IO handling logic into __ublk_io_handler_fn() which is
marked as noinline
- Move CPU affinity setup to ublk_io_handler_fn() before calling
__ublk_io_handler_fn()
- Update ublk_thread_set_sched_affinity() to take struct ublk_thread_info *
instead of struct ublk_thread *, and use pthread_setaffinity_np()
instead of sched_setaffinity()
- Reorder struct ublk_thread fields to group related state together
This change makes each thread's ublk_thread structure truly local to
the thread, improving cache locality and reducing memory usage.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move ublk_thread_set_sched_affinity() call before ublk_thread_init()
to ensure memory allocations during thread initialization occur on
the correct NUMA node. This leverages Linux's first-touch memory
policy for better NUMA locality.
Also convert ublk_thread_set_sched_affinity() to use
pthread_setaffinity_np() instead of sched_setaffinity(), as the
pthread API is the proper interface for setting thread affinity in
multithreaded programs.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert ublk_queue to use struct_size() for allocation.
Changes in this commit:
1. Update ublk_init_queue() to use struct_size(ubq, ios, depth)
instead of manual size calculation (sizeof(struct ublk_queue) +
depth * sizeof(struct ublk_io)).
This provides better type safety and makes the code more maintainable
by using standard kernel macro for flexible array handling.
Meantime annotate ublk_queue.ios by __counted_by().
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement NUMA-friendly memory allocation for ublk driver to improve
performance on multi-socket systems.
This commit includes the following changes:
1. Rename __queues to queues, dropping the __ prefix since the field is
now accessed directly throughout the codebase rather than only through
the ublk_get_queue() helper.
2. Remove the queue_size field from struct ublk_device as it is no longer
needed.
3. Move queue allocation and deallocation into ublk_init_queue() and
ublk_deinit_queue() respectively, improving encapsulation. This
simplifies ublk_init_queues() and ublk_deinit_queues() to just
iterate and call the per-queue functions.
4. Add ublk_get_queue_numa_node() helper function to determine the
appropriate NUMA node for a queue by finding the first CPU mapped
to that queue via tag_set.map[HCTX_TYPE_DEFAULT].mq_map[] and
converting it to a NUMA node using cpu_to_node(). This function is
called internally by ublk_init_queue() to determine the allocation
node.
5. Allocate each queue structure on its local NUMA node using
kvzalloc_node() in ublk_init_queue().
6. Allocate the I/O command buffer on the same NUMA node using
alloc_pages_node().
This reduces memory access latency on multi-socket NUMA systems by
ensuring each queue's data structures are local to the CPUs that
access them.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move ublk_add_tag_set() before ublk_init_queues() in the device
initialization path. This allows us to use the blk-mq CPU-to-queue
mapping established by the tag_set to determine the appropriate
NUMA node for each queue allocation.
The error handling paths are also reordered accordingly.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring task work dispatch makes an indirect call to struct io_kiocb's
io_task_work.func field to allow running arbitrary task work functions.
In the uring_cmd case, this calls io_uring_cmd_work(), which immediately
makes another indirect call to struct io_uring_cmd's task_work_cb field.
Change the uring_cmd task work callbacks to functions whose signatures
match io_req_tw_func_t. Add a function io_uring_cmd_from_tw() to convert
from the task work's struct io_tw_req argument to struct io_uring_cmd *.
Define a constant IO_URING_CMD_TASK_WORK_ISSUE_FLAGS to avoid
manufacturing issue_flags in the uring_cmd task work callbacks. Now
uring_cmd task work dispatch makes a single indirect call to the
uring_cmd implementation's callback. This also allows removing the
task_work_cb field from struct io_uring_cmd, freeing up 8 bytes for
future storage.
Since fuse_uring_send_in_task() now has access to the io_tw_token_t,
check its cancel field directly instead of relying on the
IO_URING_F_TASK_DEAD issue flag.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for uring_cmd implementations to implement functions
with the io_req_tw_func_t signature, introduce a wrapper struct
io_tw_req to hide the struct io_kiocb * argument. The intention is for
only the io_uring core to access the inner struct io_kiocb *. uring_cmd
implementations should instead call a helper from io_uring/cmd.h to
convert struct io_tw_req to struct io_uring_cmd *.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_fallback_req_func() calls io_should_terminate_tw() on each req's ctx.
But since the reqs all come from the ctx's fallback_llist, req->ctx will
be ctx for all of the reqs. Therefore, compute ts.cancel as
io_should_terminate_tw(ctx) just once, outside the loop.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On SoCs where the GPU's power-domain is in charge of setting performance
levels, the OPP table of the GPU node will have already been populated
during said power-domain's attach_dev operation.
To avoid initialising an OPP table twice, only set the OPP regulator and
the OPPs from DT if there's no OPP table present.
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-4-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
As it stands, panthor keeps a cached current frequency value for when it
wants to retrieve it. This doesn't work well for when things might
switch frequency without panthor's knowledge.
Instead, implement the get_cur_freq operation, and expose it through a
helper function to the rest of panthor.
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-3-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The Mali-based GPU on the MediaTek MT8196 SoC uses a separate MCU to
control the power and frequency of the GPU. This is modelled as a power
domain and clock provider.
It lets us omit the OPP tables from the device tree, as those can now be
enumerated at runtime from the MCU.
Add the necessary schema logic to handle what this SoC expects in terms
of clocks and power-domains.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-1-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Use kmap_local_page() instead of kmap() to avoid
CPU contention.
kmap() uses a global set of mapping slots that can cause contention
between multiple CPUs, while kmap_local_page() uses per-CPU slots
eliminating this contention. It also ensures non-sleeping operation
and provides better cache locality.
Convert kmap() to kmap_local_page() as it aligns with ongoing
kernel efforts to modernize kmap() usage for better multi-core
scalability.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Picking the changes from:
0864197382 ("drm: Move drm_gem ioctl kerneldoc to uapi file")
53096728b8 ("drm: Add DRM prime interface to reassign GEM handle")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
Now 'perf trace' and other code that might use the tools/perf/trace/beauty
autogenerated tables will be able to translate this new ioctl command into
a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2025-11-03 09:57:34.832553174 -0300
+++ after 2025-11-03 09:57:47.969409428 -0300
@@ -111,6 +111,7 @@
[0xCF] = "SYNCOBJ_EVENTFD",
[0xD0] = "MODE_CLOSEFB",
[0xD1] = "SET_CLIENT_NAME",
+ [0xD2] = "GEM_CHANGE_HANDLE",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Please see tools/include/uapi/README for further details.
Cc: Christian König <christian.koenig@amd.com>
Cc: David Francis <David.Francis@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the memory allocation in gpiolib_seq_start() fails, the s->private
field remains uninitialized and is later dereferenced without checking
in gpiolib_seq_stop(). Initialize s->private to NULL before calling
kzalloc() and check it before dereferencing it.
Fixes: e348544f79 ("gpio: protect the list of GPIO devices with SRCU")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251103141132.53471-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Prevent calling ti_sci_cmd_set_io_isolation() on firmware
that does not support the IO_ISOLATION capability. Add the
MSG_FLAG_CAPS_IO_ISOLATION capability flag and check it before
attempting to set IO isolation during suspend/resume operations.
Without this check, systems with older firmware may experience
undefined behavior or errors when entering/exiting suspend states.
Fixes: ec24643bdd ("firmware: ti_sci: Add system suspend and resume call")
Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patch.msgid.link/20251031-ti-sci-io-isolation-v2-1-60d826b65949@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Use the same value (4096) for the maximum height as used for width.
The HW limits are a 4K video, but the orientation does not matter. Fixes
issues with some portrait oriented Audi displays that exceed the old
height value (2160).
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In vb2_dc_alloc(), get_device() is called to increment the device
reference count. However, if subsequent DMA allocation fails
(vb2_dc_alloc_coherent or vb2_dc_alloc_non_coherent returns error),
the function returns without calling put_device(), causing a device
reference leak.
Add put_device() call in the error path before kfree() to properly
release the device reference acquired earlier.
Fixes: de27891f67 ("media: videobuf2: handle non-contiguous DMA allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vbi_fops stored in struct saa7146_ext_vv is a full
v4l2_file_operations, but only its .write field is used. Replace it with
a single vbi_write function pointer to save memory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver does not support anything but OF probing since
commit 47d1f33ff4 ("[media] exynos4-is: Drop drvdata handling in
fimc-lite for non-dt platforms") so drop the unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: e7332e3a55 ("V4L/DVB (12176): davinci/vpif_display: Add VPIF display driver")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: 6ffefff5a9 ("V4L/DVB (12906c): V4L : vpif capture driver for DM6467")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
v4l2_device_register_subdev_nodes() must called without taking
media_dev->graph_mutex to avoid potential AB-BA deadlock on further
subdevice driver initialization.
Fixes: fa91f1056f ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Retain the constness of the graph objects and interfaces in macros to
obtain their containers, by switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Retain the constness of the object in media_entity_to_video_device() and
to_video_device(), by switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Retain the constness of the object in media_entity_to_v4l2_subdev(), by
switching to container_of_const().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Since commit 63d00be693 ("PM: runtime: Allow unassigned
->runtime_suspend|resume callbacks"), unassigned
.runtime_{suspend,resume}() callbacks are treated the same as dummy
callbacks that just return zero.
Unassigned system sleep callbacks were always treated the same as dummy
callbacks that just return zero.
As the driver has no other PM callbacks than dummy callbacks, all PM
handling can be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Convert the Renesas JPEG Processing Unit driver from an open-coded
dev_pm_ops structure to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr().
This lets us drop the check for CONFIG_PM_SLEEP, and reduces kernel size
in case CONFIG_PM or CONFIG_PM_SLEEP is disabled, while increasing build
coverage.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
