An ftrace warning was reported in ftrace_init_ool_stub():
WARNING: arch/powerpc/kernel/trace/ftrace.c:234 at ftrace_init_ool_stub+0x188/0x3f4, CPU#0: swapper/0
The problem is that the linker script is placing .text.startup in .text
rather than in .init.text, due to an inadvertent match of the TEXT_MAIN
'.text.[0-9a-zA-Z_]*' pattern.
This bug existed for some configurations before, but is only now coming
to light due to the TEXT_MAIN macro unification in commit 1ba9f89794
("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros").
The .text.startup section consists of constructors which are used by
KASAN, KCSAN, and GCOV. The constructors are only called during boot,
so .text.startup is supposed to match the INIT_TEXT pattern so it can be
placed in .init.text and freed after init. But since INIT_TEXT comes
*after* TEXT_MAIN in the linker script, TEXT_MAIN needs to manually
exclude .text.startup.
Update TEXT_MAIN to exclude .text.startup (and its .text.startup.*
variant from -ffunction-sections), along with .text.exit and
.text.exit.* which should match EXIT_TEXT.
Specifically, use a series of more specific glob patterns to match
generic .text.* sections (for -ffunction-sections) while explicitly
excluding .text.startup[.*] and .text.exit[.*].
Also update INIT_TEXT and EXIT_TEXT to explicitly match their
-ffunction-sections variants (.text.startup.* and .text.exit.*).
Fixes: 1ba9f89794 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros")
Closes: https://lore.kernel.org/72469502-ca37-4287-90b9-a751cecc498c@linux.ibm.com
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Debugged-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://patch.msgid.link/07f74b4e5c43872572b7def30f2eac45f28675d9.1761872421.git.jpoimboe@kernel.org
The Ilitek IL79900A display controller is similar to the ILI9882T and can
be supported within the existing `panel-ilitek-ili9882t.c` driver.
This patch extends the ILI9882T driver to handle IL79900A-based panels,
such as the Tianma TL121BVMS07-00. The IL79900A uses a similar command
sequence and initialization flow, with minor differences in power supply
configuration and timing.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251031100447.253164-3-yelangyan@huaqin.corp-partner.google.com
Add device tree bindings for the Tianma TL121BVMS07-00 12.1-inch
MIPI-DSI TFT LCD panel. The panel is based on the Ilitek IL79900A
controller.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251031100447.253164-2-yelangyan@huaqin.corp-partner.google.com
Describe reset controllers for VI, MISC, AP, DSP and AO subsystems. The
one for AO subsystem is marked as reserved, since it may be used by AON
firmware.
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
drm_sched_run_job_work() contains a comment which explains that an
entity being NULL means that there is no more work to do. It can,
however, also mean that there is work, but the scheduler doesn't have
enough credits to process the jobs right now.
Provide this detail in the comment.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251028134602.94125-3-phasta@kernel.org
seqprop_sequence() is not intended for use outside seqlock.h.
Although it is accessible as a macro, it is meant to be used only
internally within the header.
Replace it with its proper wrapper, raw_read_seqcount().
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Co-developed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Link: https://lore.kernel.org/r/20251023132802.654061-1-andi.shyti@linux.intel.com
Replace the manual string copying and parsing logic with a call to
simple_strtoull() to simplify and improve qat_uclo_parse_num().
Ensure that the parsed number does not exceed UINT_MAX, and add an
approximate upper-bound check (no more than 19 digits) to guard against
overflow.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before calling acc_get_sgl(), the mem_block has already been
created. acc_get_sgl() will not return NULL or any other error.
so the return value check can be removed.
Signed-off-by: nieweiqiang <nieweiqiang@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The isolate_strategy_store function is not protected
by a lock. If sysfs operations and functions that depend
on the err_threshold variable,such as qm_hw_err_isolate(),
execute concurrently, the outcome will be unpredictable.
Therefore, concurrency protection should be added for
the err_threshold variable.
Signed-off-by: nieweiqiang <nieweiqiang@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The eqe and aeqe are device updated values that include the
valid bit and queue number. In the current process, there is no
memory barrier added, so it cannot be guaranteed that the valid
bit is read before other processes are executed. Since eqe and aeqe
are only 4 bytes and the device writes them to memory in a single
operation, saving the values of eqe and aeqe ensures that the valid
bit and queue number read by the CPU were written by the device
simultaneously.
Signed-off-by: nieweiqiang <nieweiqiang@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On multiple occasions the qce device have shown up in devices_deferred,
without the explanation that this came from the failure to acquire the
DMA channels from the associated BAM.
Use dev_err_probe() to associate this context with the failure to faster
pinpoint the culprit when this happens in the future.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
VMA pinning to GGTT is now commited asynchronously in CHV / BXT+VDT
environments to avoid lock inversion among reservation_ww and cpu_hotplug
locks, the latter acquired from stop_machine(). Then,
vma->resource->page_sizes_gtt the test uses as shift count may still be
not populated (equal 0) after i915_vma_pin() returns. Wait for VMA bind
completion in those cases to avoid shift-out-of-bounds kernel warnings and
the test case failing with -EBADSLT.
v2: Explain why VMA pinning is commited asynchronously on CHV/BXT+VTD
(Krzysztof),
- use more precise wording in commit description.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20251023082925.351307-8-janusz.krzysztofik@linux.intel.com
When running on a Cherryview, or on a Broxton with VTD enabled, pinning of
a VMA to GGTT is now committed asynchronously to avoid lock inversion
among reservation_ww and cpu_hotplug locks, the latter acquired from
stop_machine(). That may defer further processing of resources that
depend on that VMA. As a consequence, a 10ms delay in a multithreaded
migrate test case may occur too short and still incomplete threads may be
interrupted, and the test case may fail with -ERESTARTSYS or -EINTR error
code returned by any of those threads.
Extend the delay to empirically determined 100ms on affected platforms.
v3: Add an in-line comment that explains why 100ms (Andi).
v2: Fix spelling (Sebastian, Krzysztof),
- explain why VMA pinning is commited asynchronously on CHV/BXT+VTD
(Krzysztof).
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20251023082925.351307-7-janusz.krzysztofik@linux.intel.com
Add the __counted_by() compiler attribute to the flexible array member
'data' to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AMD Seattle CCP is behind an IOMMU and has 4 entries, so add
the 'iommus' property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for XTS mode of operation for AES algorithm in the AES
Engine of the DTHEv2 hardware cryptographic engine.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces infrastructure for allocating req objects on the
stack for AEADs. The additions mirror the existing sync skcipher APIs.
This can be used in cases where simple sync AEAD operations are being
done. So allocating the request on stack avoides possible out-of-memory
errors.
The struct crypto_sync_aead is a wrapper around crypto_aead and should
be used in its place when sync only requests will be done on the stack.
Correspondingly, the request should be allocated with
SYNC_AEAD_REQUEST_ON_STACK().
Similar to sync_skcipher APIs, the new sync_aead APIs are wrappers
around the regular aead APIs to facilitate sync only operations. The
following crypto APIs are added:
- struct crypto_sync_aead
- crypto_alloc_sync_aead()
- crypto_free_sync_aead()
- crypto_aync_aead_tfm()
- crypto_sync_aead_setkey()
- crypto_sync_aead_setauthsize()
- crypto_sync_aead_authsize()
- crypto_sync_aead_maxauthsize()
- crypto_sync_aead_ivsize()
- crypto_sync_aead_blocksize()
- crypto_sync_aead_get_flags()
- crypto_sync_aead_set_flags()
- crypto_sync_aead_clear_flags()
- crypto_sync_aead_reqtfm()
- aead_request_set_sync_tfm()
- SYNC_AEAD_REQUEST_ON_STACK()
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some graphics APIs differentiate between out-of-graphics-memory and
out-of-host-memory (system memory). Add a device init flag to have -ENOSPC
propagated from the resource managers instead of being converted to
-ENOMEM, to aid driver stacks in determining what error code to return or
whether corrective action can be taken at the driver level.
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-7-tvrtko.ursulin@igalia.com
While pidfs dentries are never hashed and thus retain_dentry() will never
consider them for placing them on the LRU it isn't great to always have
to go and remember that. Raise DCACHE_DONTCACHE explicitly as a visual
marker that dentries aren't kept but freed immediately instead.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-4-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
While nsfs dentries are never hashed and thus retain_dentry() will never
consider them for placing them on the LRU it isn't great to always have
to go and remember that. Raise DCACHE_DONTCACHE explicitly as a visual
marker that dentries aren't kept but freed immediately instead.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-3-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently nsfs uses the default inode_generic_drop() fallback which
drops the inode when it's unlinked or when it's unhashed. Since nsfs
never hashes inodes that always amounts to dropping the inode.
But that's just annoying to have to reason through every time we look at
this code. Switch to inode_just_drop() which always drops the inode
explicitly. This also aligns the behavior with pidfs which does the
same.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-2-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Let the TTM pool allocator know that we can afford for it to expend less
effort for satisfying contiguous allocations larger than 2MiB. The latter
is the maximum relevant PTE entry size and the driver and hardware are
happy to get larger blocks only opportunistically.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-6-tvrtko.ursulin@igalia.com
GPUs typically benefit from contiguous memory via reduced TLB pressure and
improved caching performance, where the maximum size of contiguous block
which adds a performance benefit is related to hardware design.
TTM pool allocator by default tries (hard) to allocate up to the system
MAX_PAGE_ORDER blocks. This varies by the CPU platform and can also be
configured via Kconfig.
If that limit was set to be higher than the GPU can make an extra use of,
lets allow the individual drivers to let TTM know over which allocation
order can the pool allocator afford to make a little bit less effort with.
We implement this by disabling direct reclaim for those allocations, which
reduces the allocation latency and lowers the demands on the page
allocator, in cases where expending this effort is not critical for the
GPU in question.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-5-tvrtko.ursulin@igalia.com
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_device_init() with flags with the additional
benefit of soon being able to pass in more data with just a one off
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> # For xe
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-4-tvrtko.ursulin@igalia.com
[tursulin: fixup checkpatch while applying]
eCryptfs uses MD5 for a couple unusual purposes: to "mix" the key into
the IVs for file contents encryption (similar to ESSIV), and to prepend
some key-dependent bytes to the plaintext when encrypting filenames
(which is useless since eCryptfs encrypts the filenames with ECB).
Currently, eCryptfs computes these MD5 hashes using the crypto_shash
API. Update it to instead use the MD5 library API. This is simpler and
faster: the library doesn't require memory allocations, can't fail, and
provides direct access to MD5 without overhead such as indirect calls.
To preserve the existing behavior of eCryptfs support being disabled
when the kernel is booted with "fips=1", make ecryptfs_get_tree() check
fips_enabled itself. Previously it relied on crypto_alloc_shash("md5")
failing. I don't know for sure that this is actually needed; e.g., it
could be argued that eCryptfs's use of MD5 isn't for a security purpose
as far as FIPS is concerned. But this preserves the existing behavior.
Tested by verifying that an existing eCryptfs can still be mounted with
a kernel that has this commit, with all the files matching. Also tested
creating a filesystem with this commit and mounting+reading it without.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251011200010.193140-1-ebiggers@kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap_dio_zero() uses a custom allocated memory of zeroes for padding
zeroes. This was a temporary solution until there was a way to request a
zero folio that was greater than the PAGE_SIZE.
Use largest_zero_folio() function instead of using the custom allocated
memory of zeroes. There is no guarantee from largest_zero_folio()
function that it will always return a PMD sized folio. Adapt the code so
that it can also work if largest_zero_folio() returns a ZERO_PAGE.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace simple_strtol() with the recommended kstrtoint() for parsing the
'ramdisk_start=' boot parameter. Unlike simple_strtol(), which returns a
a long, kstrtoint() converts the string directly to an integer and
avoids implicit casting.
Check the return value of kstrtoint() and reject invalid values. This
adds error handling while preserving existing behavior for valid values,
and removes use of the deprecated simple_strtol() helper.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The JC_SUBCMD_RATE_MAX_ATTEMPTS constant is currently set to 500.
In a worst-case scenario where all attempts consistently fail, this could
cause the loop to block for up to 60000 ms (500 * 60ms * 2, including the
additional retry after a timeout).
This change lowers the maximum potential blocking time to 3000 ms
(25 * 60ms * 2), improving system responsiveness and efficiency.
Signed-off-by: Willy Huang <willyhuang@google.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
USB Elan devices have the same problem as the I2C ones with a fake
battery device showing up.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reported-by: André Barata <andretiagob@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220722
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_pool_init() with flags with the additional
benefit of soon being able to pass in more data with just this one
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-3-tvrtko.ursulin@igalia.com
Use a scope-based cleanup helper for the buffer allocated with kmalloc()
in ntrig_report_version() to simplify the cleanup logic and prevent
memory leaks (specifically the !hid_is_usb()-case one).
[jkosina@suse.com: elaborate on the actual existing leak]
Fixes: 185c926283 ("HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()")
Signed-off-by: Masami Ichikawa <masami256@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
No functional change but to allow easier refactoring in the future.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-2-tvrtko.ursulin@igalia.com
The ttm/ttm_resource.h header does not really need anything from
drm_print.h. A simple forward declaration for struct drm_printer is
sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cfdb1095033112c2a7e58767481c98929984a33c.1761734313.git.jani.nikula@intel.com
The drm_mm.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/7d570ed1f0f0f14cac346bea50bce9ef02ddd166.1761734313.git.jani.nikula@intel.com
The drm_buddy.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/b303996b407fcbe2c7357bea036f79c45d6dae49.1761734313.git.jani.nikula@intel.com
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
They are all doing the same thing with the mask being the param. Just
declare our own attribute to store the mask and provide a single
function.
Another common pattern is to define the show function in the macro,
however on follow up work the mask may be used for returning more
information, so it'd need to be stored in any case.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-7-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add xe_gt_throttle under the "GT Frequency Management" and improve the
narrative making sure the documentation for both *_freq and throttle/*
attributes follow the same style.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-6-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Move the attribute definitions to be grouped together rather than near
the show() function: checkpatch keeps complaining about the missing
newline when defining new attributes and it reads better to group
everything, which should match e.g. the xe_pmu.c style.
While grouping them, also define a THROTTLE_ATTR_RO(), similar to
DEVICE_ATTR_RO(), and use it to define all attributes. This makes it
shorter and with a familiar syntax.
Finally, during the cri_throttle_attrs[] array definition, also
highlight what's coming from common attributes and what is CRI-specific.
These 3 things could be done as separate commits, but they are all about
the same thing: reduce the attribute definition verbosity and are very
simple and mechanical.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-5-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reduce boilerplate code by adding a helper to go directly from the
throttle kobject to the gt. Note that there's already a kobj_to_gt(),
but that actually converts our kobj_gt object to gt.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-4-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use a single function to read and mask the value the callers will be
interested in. This reduces the risk of a caller using a plain call to
xe_gt_throttle_get_limit_reasons() without applying any mask, which can
return unexpected bits for future platforms.
Select which reg and mask it's going to be used according to the
platform and gt type and always use that one function.
There was an odd xe_gt_dbg() when reading the status, which is not done
for any other throttle/* sysfs file, so just make the status be as
special as everybody else.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-3-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There's no need to be so verbose with two functions per bit:
read_reason_xxxxx() and reason_xxxxx_show(). Drop the former and just
use a new is_throttled_by() that receives the mask as parameter.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20251029-gt-throttle-cri-v3-2-d1f5abbb8114@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
