Enhance the probing sequence by using the ports property of the
display-subsystem node.
That done, it becomes possible to handle the display-substem node
outside of the soc node within the device-tree and not have each IP
blocks as children of the display-subsystem node.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20250717-sti-rework-v1-2-46d516fb1ebb@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Return value for DMA allocation was not checked. Check it and return
error code in case of failing.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20250717-sti-rework-v1-1-46d516fb1ebb@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The "bgpio" prefix is a historical left-over. We no longer use it in any
user-facing symbol. Let's drop it from the module's internals as well
and replace it with "gpio_mmio_".
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251027-gpio-mmio-refactor-v1-2-b0de7cd5a4b9@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add compatible string for the PWRAP block on MT8189 SoC, which is
compatible with the one used on MT8195.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add an entry for the MT8391 SoC with commercial name Genio 720.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This adds PCI ID for Intel Wildcat Lake Thunderbolt/USB4 host
controller.
This has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=odNq
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.18-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.18-rc4
This adds PCI ID for Intel Wildcat Lake Thunderbolt/USB4 host
controller.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.18-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add support for Intel Wildcat Lake
With LLVM prior to 17.0.0:
drivers/pinctrl/pinctrl-mpfs-iomux0.c:89:2: error: initializer element is not a compile-time constant
MPFS_IOMUX0_GROUP(spi0),
^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-mpfs-iomux0.c:79:10: note: expanded from macro 'MPFS_IOMUX0_GROUP'
.mask = BIT(mpfs_iomux0_##_name##_pins[0]), \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/vdso/bits.h:7:19: note: expanded from macro 'BIT'
\#define BIT(nr) (UL(1) << (nr))
^~~~~~~~~~~~~~~
This is a constant, but LLVM prior to a change from Nick to match the
gcc behaviour did not allow this. The macro isn't really all that much
of an idiot-proofing, just change it to the same sort that's in the
gpio2 driver, where a second argument provides the mask/setting.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/2140
Fixes: 46397274da ("pinctrl: add polarfire soc iomux0 pinmux driver")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pfkey user configuration interface was replaced by the netlink
user configuration interface more than a decade ago. In between
all maintained IKE implementations moved to the netlink interface.
So let config NET_KEY default to no in Kconfig. The pfkey code
will be removed in a second step.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Tuomo Soini <tis@foobar.fi>
Acked-by: Paul Wouters <paul@nohats.ca>
OS scheduling mode gets deprecated starting from NPU6 onward.
Print warning and fallback to HW scheduling mode if OS mode is
explicitly selected with sched_mode parameter.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029201554.257708-1-karol.wachowski@linux.intel.com
Introduce a new ioctl `drm_ivpu_bo_create_from_userptr` that allows
users to create GEM buffer objects from user pointers to memory regions.
The user pointer must be page-aligned and the memory region must remain
valid for the buffer object's lifetime.
Userptr buffers enable direct use of mmapped files (e.g. inference
weights) in NPU workloads without copying data to NPU buffer objects.
This reduces memory usage and provides better flexibility for NPU
applications.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029091752.203198-1-karol.wachowski@linux.intel.com
Fix 'Memory manager not clean during takedown' warning that occurs
when ivpu_gem_bo_free() removes the BO from the BOs list before it
gets unmapped. Then file_priv_unbind() triggers a warning in
drm_mm_takedown() during context teardown.
Protect the unmapping sequence with bo_list_lock to ensure the BO is
always fully unmapped when removed from the list. This ensures the BO
is either fully unmapped at context teardown time or present on the
list and unmapped by file_priv_unbind().
Fixes: 48aea7f2a2 ("accel/ivpu: Fix locking in ivpu_bo_remove_all_bos_from_context()")
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029071451.184243-1-karol.wachowski@linux.intel.com
The memory allocated for urbs with kcalloc() is not freed on any error
path. Fix that by freeing it in the error path.
Fixes: e85d0918b5 ("[PATCH] ZyDAS ZD1211 USB-WLAN driver")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20251028174341.139134-1-nihaal@cse.iitm.ac.in
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Management frames on 6 GHz do not include HT Capabilities, causing HT
Action frames to be dropped in ieee80211_rx_h_action(). The current logic
checks only ht_cap.ht_supported, which fails for 6 GHz radios that support
only HE and EHT.
Update the condition to also allow HT Action frame processing when
he_cap.has_he is true. This enables support for HE dynamic SM power save
as defined in IEEE Std 802.11ax-2021, section 26.14.4.
Signed-off-by: Thomas Wu <quic_wthomas@quicinc.com>
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028043442.523647-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029165642.364488-3-marco.crivellari@suse.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029165642.364488-2-marco.crivellari@suse.com
Some embedded platforms have eeproms located in flash. Add nvmem support
to handle this. Support is added for PCI and SOC backends.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20251027180639.3797-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 already reports some basic information in the radiotap header
with the known fields declared by the driver. However, drivers may want
to report more accurate information and in that case the full VHT
radiotap structure needs to be provided.
Add a new RX_FLAG_RADIOTAP_VHT which is set when the VHT information
should be pulled from the skb. Update the code to fill in the VHT fields
to only do so when requested by the driver or if the information has not
yet been set. This way the driver can fully control the information if
it chooses so.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251027142118.0bad1c307a21.I2cf285c20a822698039603f2af00ed9c548f2ee0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20251027115022.390997-3-sakari.ailus@linux.intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Vaio RPL is equipped with ACL256, and needs a
fix to make the internal mic and headphone mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20251029181152.389302-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace blake2b_generic.c with a new file blake2b.c which implements the
BLAKE2b crypto_shash algorithms on top of the BLAKE2b library API.
Change the driver name suffix from "-generic" to "-lib" to reflect that
these algorithms now just use the (possibly arch-optimized) library.
This closely mirrors crypto/{md5,sha1,sha256,sha512}.c.
Remove include/crypto/internal/blake2b.h since it is no longer used.
Likewise, remove struct blake2b_state from include/crypto/blake2b.h.
Omit support for import_core and export_core, since there are no legacy
drivers that need these for these algorithms.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Migrate the arm-optimized BLAKE2b code from arch/arm/crypto/ to
lib/crypto/arm/. This makes the BLAKE2b library able to use it, and it
also simplifies the code because it's easier to integrate with the
library than crypto_shash.
This temporarily makes the arm-optimized BLAKE2b code unavailable via
crypto_shash. A later commit reimplements the blake2b-* crypto_shash
algorithms on top of the BLAKE2b library API, making it available again.
Note that as per the lib/crypto/ convention, the optimized code is now
enabled by default. So, this also fixes the longstanding issue where
the optimized BLAKE2b code was not enabled by default.
To see the diff from arch/arm/crypto/blake2b-neon-glue.c to
lib/crypto/arm/blake2b.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a library API for BLAKE2b, closely modeled after the BLAKE2s API.
This will allow in-kernel users such as btrfs to use BLAKE2b without
going through the generic crypto layer. In addition, as usual the
BLAKE2b crypto_shash algorithms will be reimplemented on top of this.
Note: to create lib/crypto/blake2b.c I made a copy of
lib/crypto/blake2s.c and made the updates from BLAKE2s => BLAKE2b. This
way, the BLAKE2s and BLAKE2b code is kept consistent. Therefore, it
borrows the SPDX-License-Identifier and Copyright from
lib/crypto/blake2s.c rather than crypto/blake2b_generic.c.
The library API uses 'struct blake2b_ctx', consistent with other
lib/crypto/ APIs. The existing 'struct blake2b_state' will be removed
once the blake2b crypto_shash algorithms are updated to stop using it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add le64_to_cpu_array() and cpu_to_le64_array(). These mirror the
corresponding 32-bit functions.
These will be used by the BLAKE2b code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
A couple more small cleanups to the BLAKE2s code before these things get
propagated into the BLAKE2b code:
- Drop 'const' from some non-pointer function parameters. It was a bit
excessive and not conventional.
- Rename 'block' argument of blake2s_compress*() to 'data'. This is for
consistency with the SHA-* code, and also to avoid the implication
that it points to a singular "block".
No functional changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
For consistency with the SHA-1, SHA-2, SHA-3 (in development), and MD5
library APIs, rename blake2s_state to blake2s_ctx.
As a refresher, the ctx name:
- Is a bit shorter.
- Avoids confusion with the compression function state, which is also
often called the state (but is just part of the full context).
- Is consistent with OpenSSL.
Not a big deal, of course. But consistency is nice. With a BLAKE2b
library API about to be added, this is a convenient time to update this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reorder the parameters of blake2s() from (out, in, key, outlen, inlen,
keylen) to (key, keylen, in, inlen, out, outlen).
This aligns BLAKE2s with the common conventions of pairing buffers and
their lengths, and having outputs follow inputs. This is widely used
elsewhere in lib/crypto/ and crypto/, and even elsewhere in the BLAKE2s
code itself such as blake2s_init_key() and blake2s_final(). So
blake2s() was a bit of an exception.
Notably, this results in the same order as hmac_*_usingrawkey().
Note that since the type signature changed, it's not possible for a
blake2s() call site to be silently missed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add FIPS cryptographic algorithm self-tests for all SHA-1 and SHA-2
algorithms. Following the "Implementation Guidance for FIPS 140-3"
document, to achieve this it's sufficient to just test a single test
vector for each of HMAC-SHA1, HMAC-SHA256, and HMAC-SHA512.
Just run these tests in the initcalls, following the example of e.g.
crypto/kdf_sp800108.c. Note that this should meet the FIPS self-test
requirement even in the built-in case, given that the initcalls run
before userspace, storage, network, etc. are accessible.
This does not fix a regression, seeing as lib/ has had SHA-1 support
since 2005 and SHA-256 support since 2018. Neither ever had FIPS
self-tests. Moreover, fips=1 support has always been an unfinished
feature upstream. However, with lib/ now being used more widely, it's
now seeing more scrutiny and people seem to want these now [1][2].
[1] https://lore.kernel.org/r/3226361.1758126043@warthog.procyon.org.uk/
[2] https://lore.kernel.org/r/f31dbb22-0add-481c-aee0-e337a7731f8e@oracle.com/
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251011001047.51886-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The "reg" in top-level has maxItems:2, thus repeating this in "if:then:"
blocks is redundant. Similarly number of items cannot be less than 1.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251027113107.75835-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After DME Link Startup, the error return value is set to the MIPI UniPro
GenericErrorCode which can be 0 (SUCCESS) or 1 (FAILURE). Upon failure
during driver probe, the error code 1 is propagated back to the driver
probe function which must return a negative value to indicate an error,
but 1 is not negative, so the probe is considered to be successful even
though it failed. Subsequently, removing the driver results in an oops
because it is not in a valid state.
This happens because none of the callers of ufshcd_init() expect a
non-negative error code.
Fix the return value and documentation to match actual usage.
Fixes: 69f5eb78d4 ("scsi: ufs: core: Move the ufshcd_device_init(hba, true) call")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-5-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link startup becomes unreliable for Intel Alder Lake based host
controllers when a 2nd DME_LINKSTARTUP is issued unnecessarily. Employ
UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress that from happening.
Fixes: 7dc9fb47bc ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-4-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_link_startup() has a facility (link_startup_again) to issue
DME_LINKSTARTUP a 2nd time even though the 1st time was successful.
Some older hardware benefits from that, however the behaviour is
non-standard, and has been found to cause link startup to be unreliable
for some Intel Alder Lake based host controllers.
Add UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress
link_startup_again, in preparation for setting the quirk for affected
controllers.
Fixes: 7dc9fb47bc ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-3-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Intel platforms with UFS, can support Suspend-to-Idle (S0ix) and
Suspend-to-RAM (S3). For S0ix the link state should be HIBERNATE. For
S3, state is lost, so the link state must be OFF. Driver policy,
expressed by spm_lvl, can be 3 (link HIBERNATE, device SLEEP) for S0ix
but must be changed to 5 (link OFF, device POWEROFF) for S3.
Fix support for S0ix/S3 by switching spm_lvl as needed. During suspend
->prepare(), if the suspend target state is not Suspend-to-Idle, ensure
the spm_lvl is at least 5 to ensure that resume will be possible from
deep sleep states. During suspend ->complete(), restore the spm_lvl to
its original value that is suitable for S0ix.
This fix is first needed in Intel Alder Lake based controllers.
Fixes: 7dc9fb47bc ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-2-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Patch "Make HID attributes visible" is needed for older kernel versions
(e.g. 6.12) where ufs_get_device_desc() is called from ufshcd_probe_hba().
In these older kernel versions ufshcd_get_device_desc() may be called
after the sysfs attributes have been added. In the upstream kernel however
ufshcd_get_device_desc() is called before ufs_sysfs_add_nodes(). See also
the ufshcd_device_params_init() call from ufshcd_init(). Hence, calling
sysfs_update_group() is not necessary.
See also commit 69f5eb78d4 ("scsi: ufs: core: Move the
ufshcd_device_init(hba, true) call") in kernel v6.13.
This patch fixes the following kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251028222433.1108299-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When building drivers/net/ethernet/intel/idpf/xsk.c for ARCH=arm with
CONFIG_CFI=y using a version of LLVM prior to 22.0.0, there is a
BUILD_BUG_ON failure:
$ cat arch/arm/configs/repro.config
CONFIG_BPF_SYSCALL=y
CONFIG_CFI=y
CONFIG_IDPF=y
CONFIG_XDP_SOCKETS=y
$ make -skj"$(nproc)" ARCH=arm LLVM=1 clean defconfig repro.config drivers/net/ethernet/intel/idpf/xsk.o
In file included from drivers/net/ethernet/intel/idpf/xsk.c:4:
include/net/libeth/xsk.h:205:2: error: call to '__compiletime_assert_728' declared with 'error' attribute: BUILD_BUG_ON failed: !__builtin_constant_p(tmo == libeth_xsktmo)
205 | BUILD_BUG_ON(!__builtin_constant_p(tmo == libeth_xsktmo));
| ^
...
libeth_xdp_tx_xmit_bulk() indirectly calls libeth_xsk_xmit_fill_buf()
but these functions are marked as __always_inline so that the compiler
can turn these indirect calls into direct ones and see that the tmo
parameter to __libeth_xsk_xmit_fill_buf_md() is ultimately libeth_xsktmo
from idpf_xsk_xmit().
Unfortunately, the generic kCFI pass in LLVM expands the kCFI bundles
from the indirect calls in libeth_xdp_tx_xmit_bulk() in such a way that
later optimizations cannot turn these calls into direct ones, making the
BUILD_BUG_ON fail because it cannot be proved at compile time that tmo
is libeth_xsktmo.
Disable the generic kCFI pass for libeth_xdp_tx_xmit_bulk() to ensure
these indirect calls can always be turned into direct calls to avoid
this error.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2124
Fixes: 9705d6552f ("idpf: implement Rx path for AF_XDP")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-3-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
There are two different ways that LLVM can expand kCFI operand bundles
in LLVM IR: generically in the middle end or using an architecture
specific sequence when lowering LLVM IR to machine code in the backend.
The generic pass allows any architecture to take advantage of kCFI but
the expansion of these bundles in the middle end can mess with
optimizations that may turn indirect calls into direct calls when the
call target is known at compile time, such as after inlining.
Add __nocfi_generic, dependent on an architecture selecting
CONFIG_ARCH_USES_CFI_GENERIC_LLVM_PASS, to disable kCFI bundle
generation in functions where only the generic kCFI pass may cause
problems.
Link: https://github.com/ClangBuiltLinux/linux/issues/2124
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-1-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Ajay Neeli <ajay.neeli@amd.com> says:
This patch series adds support for the UFS driver on the AMD Versal
Gen 2 SoC. It includes:
- Device tree bindings and driver implementation.
- Secure read support for the secure retrieval of UFS calibration
values.
The UFS host driver is based upon the Synopsis DesignWare (DWC) UFS
architecture, utilizing the existing UFSHCD_DWC and UFSHCD_PLATFORM
drivers.
Link: https://patch.msgid.link/20251021113003.13650-1-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the UFS host controller on the AMD Versal Gen 2 SoC,
built on the Synopsys DWC UFS architecture, using the UFSHCD DWC and
UFSHCD platform driver. This controller requires specific configurations
like M-PHY/RMMI/UniPro and vendor specific registers programming before
doing the UIC_LINKSTARTUP.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-5-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add devicetree document for UFS Host Controller on AMD Versal Gen 2 SoC.
This includes clocks and clock-names as mandated by UFS common bindings.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Co-developed-by: Ajay Neeli <ajay.neeli@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-2-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The zero-copy Device Memory (Devmem) transmit path
relies on the socket's route cache (`dst_entry`) to
validate that the packet is being sent via the network
device to which the DMA buffer was bound.
However, this check incorrectly fails and returns `-ENODEV`
if the socket's route cache entry (`dst`) is merely missing
or expired (`dst == NULL`). This scenario is observed during
network events, such as when flow steering rules are deleted,
leading to a temporary route cache invalidation.
This patch fixes -ENODEV error for `net_devmem_get_binding()`
by doing the following:
1. It attempts to rebuild the route via `rebuild_header()`
if the route is initially missing (`dst == NULL`). This
allows the TCP/IP stack to recover from transient route
cache misses.
2. It uses `rcu_read_lock()` and `dst_dev_rcu()` to safely
access the network device pointer (`dst_dev`) from the
route, preventing use-after-free conditions if the
device is concurrently removed.
3. It maintains the critical safety check by validating
that the retrieved destination device (`dst_dev`) is
exactly the device registered in the Devmem binding
(`binding->dev`).
These changes prevent unnecessary ENODEV failures while
maintaining the critical safety requirement that the
Devmem resources are only used on the bound network device.
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: Vedant Mathur <vedantmathur@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: bd61848900 ("net: devmem: Implement TX path")
Signed-off-by: Shivaji Kant <shivajikant@google.com>
Link: https://patch.msgid.link/20251029065420.3489943-1-shivajikant@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: add iterator mdiobus_for_each_phy
Add and use an iterator for all PHY's on a MII bus, and phy_find_next()
as a prerequisite.
====================
Link: https://patch.msgid.link/07fc63e8-53fd-46aa-853e-96187bba9d44@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new iterator mdiobus_for_each_phy() to simplify the code.
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/326d1337-2c22-42e3-a152-046ac5c43095@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
